Search Results

Search found 25400 results on 1016 pages for 'enable manual correct'.

Page 338/1016 | < Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >

• Mac Mini's internet very slow, every other device fine (PC, iPhone, Xbox 360)

  - by alex

  I recently haven't used my Mac Mini for about 5 days (however it was left on). I seem to be able to connect and get great download / upload speeds through my PC, Xbox 360, iPhone and parents' laptop. However, my Mac Mini is very slow. OS X's Mail.app is downloading mail at 0.4kbps and then dropping to 0. Skype file transfers are doing the same. Browsing the net is a terrible experience. It is taking 30 seconds or more to download basic pages. All of my devices connect wirelessly to a Netgear router / modem. I have tried giving the Mac Mini a manual IP, and renew DHCP lease, as well as flush DNS in Terminal. I have also rebooted the router / modem twice, and the Mac Mini twice. Do you know what could be causing this? Thanks Update This is very weird. It is also very slow accessing localhost (setup through MAMP) and also slow to access the Netgear router config pages.

  Read the article

• Examples of Liskov Substitution

  - by james lewis

  I'm facilitating a session next week on the Liskov Substitution Principle and I was wondering if anyone had any examples of violations 'from the trenches'? I'm looking for something other than uncle Bob's rectangle - square problem and the persistent set problem he talks about in A-PPP (although that is a great example). So far I'm using the example of a (very simple) List and an IndexedList as the 'correct' use of inheritance. And the addition of a Set to this hierarchy as a violation (as a Set is distinct; strengthening the pre condition of the Add method). I've also taken this great example and it's solution from this question Both those examples are great but I'm looking for something more subtle and harder to spot. So far I've come up with nothing so if you've got a great, subtle example post it up. Also, any metaphors you've come across that helped you understand LSP would be really useful too.

  Read the article

• Ubuntu does not work with Nvidia drivers, gives random squares after logging in

  - by jimbo

  I tried installing both with wubi and by booting from a usb drive. After I tried both it was the same. Ubuntu tried to login, but after a while, a weird pattern with squarely shapes appeared. At one point, after using recovery mode and then the low graphics one (i don't remember how it was called exactly) i managed to get in. It still didn't display at correct resolution, and the mouse was invisible at times. However, after rebooting once, because i tried downloading the nvidia drivers, i didn't manage to get in again, so i have the same problem... I have no idea what to try to become unstuck. The main problem is that after the login, ubuntu crashes, with a screen full of randomly coloured squares. Should I just give up?

  Read the article

• Exposing warnings\errors from data objects (that are also list returned)

  - by Oren Schwartz

  I'm exposing Data objects via service oriented assembly (which on future usages might become a WCF service). The data object is tree designed, as well as formed from allot of properties.Moreover, some services return one objects, others retrieve a list of them (thus disables throwing exceptions). I now want to expose data flow warnings and wondering what's the best way to do it having to things to consider: (1) seperation (2) ease of access. On the one hand, i want the UI team to be able to access a fields warnings (or errors) without having them mapping the field names to an external source but on the other hand, i don't want the warnings "hanged" on the object itself (as i don't see it a correct design). I tought of creating a new type of wrapper for each field, that'll expose events and they'll have to register the one's they care about (but totally not sure) I'll be happy to hear your thoughts. Could you please direct me to a respectful design pattern ? what dp will do best here ? Thank you very much!

  Read the article

• Unlock all private keys on Ubuntu, entering password only once at login

  - by conradlee

  I login to Ubuntu 12.04 using a password. Later on, when I use my browser(Chrome), I'm asked for a password to unlock the keychain so that the browser can access my saved credentials for various websites (it's the same password). Also, whenever I use SSH to connect to other computers using my private key, I am prompted for the same password to unlock my private key. How can I make it so that I am asked for my password exactly once per login (given that my login password is the same as the one I use for all my private keys)? Probably someone will try to label this question as a duplicate of this question, this question, or this question. While these questions are similar, none of them explicitly say that there still needs to be a password entered on login, as I am demanding here. As a result, the accepted solutions just say "set your passwords to blank"--I don't want that, it's dangerous! So I am aware of the similar questions, but none of them has received the correct answer yet, because they are slightly different.

  Read the article

• C# creating a simple snake game

  - by Guy David

  I was thinking about creating a snake game with C#, so I ran ideas in my head, and some problems came up. How can I track and output in the correct location the blocks that run after the snake's head? If the snake is built of five blocks, and the user starts going in a circle, how can I print the snake body in the right location? Also, how can I create an action that will run on the background, which will move the snake forward, no matter what the user does? What structure should my code have? (code design structure) This should be a console application, since it's the only framework I am familiar with. I am not looking for finished code, since I want to really understand how it should work.

  Read the article

• Resetting Google's data for the website

  - by Giorgi

  I own a domain which I was using for experimenting with different platforms and content management systems. I really did not care about seo while I was building the website so I guess my website has quite a 'bad reputation' for Google search. My website is almost finished and I am planning to launch it soon but would like to tell Google to forget everything it nows about it and start everything over. What's the correct way for doing it? I found Requesting reconsideration of site but I'm not sure if that's the best way to do it. Any advice?

  Read the article

• How to fully remove a package?

  - by user471011

  I installed Eclipse via command apt-get install eclipse. this command completed correct. After this I run eclipse add some configurations: Added new url for "Available Software Sites". On the next step I try removed Eclipse via apt-get remove eclipse. and install eclipse again. And here I see surprise: in new installed eclipse I see my old url for "Available Software Sites". So, I guess, that configuration files not removed! After this I tried different commands: something like this: sudo dpkg -r eclipse sudo apt-get --purge remove eclipse sudo apt-get autoremove but after I again install Eclipse I see my Url. So, How I can fully remove eclipse with configuration files???

  Read the article

• Writing Large Portions Of Code Then Debugging?

  - by The Floating Brain

  Lately I have been writing a game engine, and I have been writing a lot of "foundation stuff" (standard interfaces, modules, a message system ect.), but I have noticed a pattern, a lot of the stuff is interdependent and I can not debug until everything is done, hence I do not debug for about 3 to 5 hours at a time. I am wondering if this is an acceptable practice for this part of the project, and if not, if anyone can give me some advice? -----Update-----: I downloaded some code metrics tools, and my programs cyclomatic complexity is 1.52 which as I understand it is good, and should correlate to high cohesion, if I am wrong please correct me/

  Read the article

• Lvalue required error [migrated]

  - by ankur.trapasiya

  While working with pointers i wrote the following code, int main() { int a[]={10,20,30,40,50}; int i; for(i=0;i<5;i++) { printf("\n%d",*a); a++; } return 0; } Now as per my understanding array name itself is an address in c and the pointer arithmetic done is here is correct as per my knowledge. But when i try to run the code it is giving me "Lvalue Required" error. So what is the exact reason for occuring Lvalue required error because before this also i have come across situations where this error is there. Secondly why the arithmetic on the pointer is not legal here in this case?

  Read the article

• How to troubleshoot Ubuntu One in Maverick beta?

  - by greggory.hz

  I just updated to the Maverick beta (actually it's a fresh install, and not an upgrade of 10.04). But now "Ubuntu One" doesn't show up in my me-menu thing. In addition, when I go to Ubuntu One from System-Preferences and attempt to log in from there it will sometimes look like it works, but other times it won't do anything. When I go to the command line and type u1sdtool -s it will either say something like "doing auth dance" or "auth failed" and often it has never even prompted me to log in or try to get a new password (even though I know it's correct). Anyway, this is the main hangup I have with the Maverick beta. I can't get to my ubuntu one account from the native client. Is this a widespread issue? Is there something I can do to fix this?

  Read the article

• Is online freelance work viable by American standards?

  - by JoelFan

  I've always been curious about trying out online freelance sites... it would be nice to work from home, feel independent, get to choose what I want to work on, get to work on different technologies, lose the PHB, etc. However I never really gave them a chance because I'm used to American rates and assumed that I would be competing with people from India, Russia, China, etc. that would severely undercut me, and it wouldn't be viable for me. Am I correct in this assumption or should I give it a shot? What kind of hourly rate would I be able to expect on short-term programming work?

  Read the article

• Calculate an AABB for bone animated model

  - by Byte56

  I have a model that has its initial bounding box calculated by finding the maximum and minimum on the x, y and z axes. Producing a correct result like so: The vertices are then stored in a VBO and only altered with matrices for rotation and bone animation. Currently the bounds are not updated when the model is altered. So the animated and rotated model has bounds like so: (Maybe it's hard to tell, but the bounds are the same as before, and don't accurately represent the rotated/animated model) So my question is, how can I calculate the bounding box using the armature matrices and rotation/translation matrices for each model? Keep in mind the modified vertex data is not available because those calculations are performed on the GPU in the shader. The end result I want is to have an accurate AABB the represents the animated model for picking/basic collision checks.

  Read the article

• How to configure networking on an appliance such that it can plug and play on any corporate network?

  - by Joshua Lim

  I had a chance to configure a Moxa NPort device server appliance on my client's network, it was very easy to do so, done in just 2 minutes. Here's what I did:- The Moxa device server had a preset IP address of 192.168.127.254 and subnet mask 255.255.255.0 - http://www.moxa.com/doc/manual/nport/5400/NPort_5400_Series_Users_Manual_v4.pdf Moxa provides a Windows software which I used to "scan" for the device server. It worked like magic! The software returns a list of device servers found. Each device server is identified by MAC address, and by selecting the device server using the software, I can reset the default IP address and subnet mask of that device server! In comparison, during an earlier project, I spent 2 hours trying to get KVM to work for a Windows 7 embedded appliance I'm trying to install in my client's network - http://superuser.com/questions/380305/how-to-configure-windows-7-professional-appliance-pc-on-my-clients-network-usin Prior to that, I have already tried pre-configuring the IP address and subnet mask to the one which my client provided, yet the appliance still can't connect to the client's network! I've also tried cross cable, didn't work either. After KVM worked, I discovered that the network settings were "lost" after I plug the machine into the client's network. Now my question is what can I do to setup my Windows 7 embedded appliance so that it can connect to any network like that the Moxa device server? I tried experimenting this on my network using a Windows machine configured to an IP address of 192.168.127.254 and subnet mask 255.255.255.0, but it doesn't connect to my network that uses 192.168.0.*. :( EDIT: I would like to point out that the Moxa Windows configuration software seems to be able to connect to any Moxa device connected to the network even if it is on a different subnet, as long as the network adapter shows "connected". This is important because the Moxa device has no VGSM port or interface to configure the IP address.

  Read the article

• Using gentoo, how does one stick -9999 ebuild to a specific svn revision?

  - by hurikhan77

  As an example given the django-9999 ebuild, to match the developers environment I need to checkout R12120 from trunk. Installing Django manually is not option due to package management reasons. But there is also no ebuild in portage for 1.2 beta versions. So I did the following: ESVN_OPTIONS="-r12120" emerge -1a django Which installed the required revision from svn. But this is cumbersome in a way. Is there some way to define this statically per ebuild, eg something like: DJANGO_SVN_REV="12120" in make.conf. This would be much cleaner in my eyes. Because next time I need to rebuild django for whatever reason, I need to remember: "Oh I wanted this to stick to a specific revision" and next question will be "err, f&!#$?%, what was it again?" What's the best way to go here? Keep in mind: Manually installing packages without package manager knowledge is no option Working around with manual emerge variable prefixing is no option Setting up a /etc/portage/package.env would be a way to go (as described here) but that seems pretty unsupported and kludgy to me and thus unpreferable Modifying make.conf would be a way to go Keeping the ebuild in an overlay would be an option

  Read the article

• Blurry vertical sections using fglrx with Radeon hd 6970

  - by Jesus Ramos

  So I managed to get fglrx working by downloading the drivers from ATI because the ones from additional drivers boot to a black screen and the open source dont let me change resolution. My one issue is that half of my monitor is fine and the other half is blurry almost as if there's a blurry vertical stripe on the right side. I tried disabling Compiz and have the same issue in both gnome and kde, I was wondering if theres an xorg.conf change that could be made to fix this as I have already set the resolution and refresh rates to the correct values.

  Read the article

• Excel Help: Data Input Help

  - by B-Ballerl

  Everyday I download data from a site that will have rows each filled with individual data for clients. I'm able to input the data into excel as a whole but after that I'm having trouble figuring out how to put it into a chart. For example Web visits time. So say Client 1 stayed for 5 min increasing his total time on the site to 20 min and Client 2 stayed for 0 min keeping his time of 10 min and they were both registered on new years eve, and R1's last login was today and R2's was yesterday. (R for some reason repersents Client, no idea why...). Client 3 hasn't been on since he registered keeping his total at 4 min So my data would look something like this for Today (20110104) R1,20101231,20110104,20 R2,20101231,20110103,10 R3,20101231,20101231,4 And this for the day before (201101030), R1,20101231,20110102,15 R2,20101231,20110103,10 R3,20101231,20101231,4 I get about 200+ client rows each day where even the names of the Client list are changing. Is it possible to import the data each day and fill it in a excel sheet where the Client number is off on the left hand side in a table, and the amount of time (Whole Number ex. 4) each day it spends on the site extend to the right under it's specific date see Picture? I've manage to create a manual sheet but have been unsucessful at getting excel to do any of it for me. Here are two pictures:

  Read the article

• Sound Problem due to wrong driver installation

  - by Starx

  First of all, the audio used to play from the speaker but whenever I connected a headphone or speaker in the I, the sound didn't came. So I installed a realtek sound driver to fix this (actually I didn't find any relevant driver for my sound card so I installed it hoping it would show some light) When I rebooted the system, my sound is completely gone and now ubuntu does not detect any sound devices in my system. I clearly installed wrong driver, now I need to remove and go to previous stage and find a correct driver. My laptop is: Dell Studio 1747, uses a speaker Creative Labs Sound X-Fi MB Sound Blaster and the chipset is INTEL PM55. How can I fix this?

  Read the article

• What privilege level is required on a Windows client workstation on an ActiveDomain to break file lo

  - by Mike Burton

  I'm not sure if I should be asking this here or on StackOverflow, but here goes: I'm part of a team maintaining a document management application, and I'm trying to figure out Windows file locking permissions. We use a utility somebody downloaded years ago called psunlock to remotely close all locks on a file. We recently discovered that this does not work across different domains on our VPN. A little bit of digging lead me to the samba manual's discussion of file locking. I still don't really "get it", though. Does anyone have any insight to share into how the process of locking and breaking locks on files works in a network context? My thinking is that privileges are required both on the file appliance and on the client workstations which hold locks. Is that accurate? Can anyone give a more specific version? Ideally I'm looking for something along the lines of A user must have privilege level X in order to break locks held from a client workstation. In practice I'd be happy with a hotlink to a good white paper on the subject.

  Read the article

• How are Java ByteBuffer's limit and position variable's updated?

  - by Dummy Derp

  There are two scenarios: writing and reading Writing: Whenever I write something to the ByteBuffer by calling its put(byte[]) method the position variable is incremented as: current position + size of byte[] and limit stays at the max. If, however, I put the data in a view buffer then I will have to, manually, calculate and update the position Before I call the write(ByteBuffer) method of the channel to write something, I will have to flip() the Bytebuffer so that position points to zero and limit points to the last byte that was written to the ByteBuffer. Reading: Whenever I call the read(ByteBuffer) method of a channel to read something, the position variable stays at 0 and the limit variable of the ByteBuffer points to the last byte that was read. So, if the ByteBuffer is smaller than the file being read, the limit variable is pushed to max This means that the ByteBuffer is already flipped and I can proceed to extracting the values from the ByteBuffer. Please, correct me where I am wrong :)

  Read the article

• How can I disable Hibernate completely?

  - by Lekensteyn

  I have seen the answer on How to disable hibernating?, but I have no such file. Possibly because that suggestion was written for Ubuntu, not Kubuntu (KDE, not Gnome). I do not have a swap on my encrypted SSD, my system freezes (cannot even change Caps Lock) if I accidentally press the "Hibernate" button at "Energy management". My keyboard has a Hibernate button (Fn + F4) next to the volume control buttons and every time I press the wrong key, the system will freeze after. So, what is the correct way to disable it? If there is no solution, a work-around is welcome too.

  Read the article

• Uninstall php5 installed from source

  - by diegomichel

  I have tried to install php5 from source , and it worked... Then for some reason need to install the official packets, so i tried a make uninstall and for my surprise there is such make uninstall... so i tried delete all the installed files by hand. Then installed the official debian packages and it worked fine... till i need install sqlite module, which give me the following error: php --version PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/pdo_sqlite.so' - /usr/lib/php5/20090626/pdo_sqlite.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626/sqlite.so' - /usr/lib/php5/20090626/sqlite.so: undefined symbol: php_pdo_register_driver in Unknown on line 0 PHP 5.3.1-5 with Suhosin-Patch (cli) (built: Feb 22 2010 22:46:05) Copyright (c) 1997-2009 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies So i remember that manual install i did, and i think there is some old lib installed causing that problem, the bad thing is that there is not such make uninstall on the source code of php5... php-5.2.13 > make uninstall make: *** No rule to make target `uninstall'. Stop. I have tried reinstall and purge all php related packages via aptitude with not success. OS: Debian Squeeze. uname -a Linux desktop 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64 GNU/Linux Any idea how to fix that?

  Read the article

• Unable to install VMWare Workstation v8

  - by pst007x

  Installing VMware 8.0.2 64bit Ubuntu 12.04LTS 64bit BETA My Kernel version is: 3.2.0-20-generic pst007x@pst007x-Aspire-5741:~$ sudo sh VMware-Workstation-Full-8.0.2- 591240.x86_64.bundle Installs ok When I launch I am asked to install modules which are compiled and loaded into the running kernel. A window opens VMware Kernel Module Updater This fails on Virtual Network Device ERROR LOG. UPDATE: PATCH. When I try to add patch, following error: pst007x@pst007x-Aspire-5741:~$ sudo sh patch-modules_3.2.0.sh [sudo] password for pst007x: patch-modules_3.2.0.sh: 27: [: workstation8.0.2: unexpected operator patch-modules_3.2.0.sh: 28: [: workstation8.0.2: unexpected operator Sorry, this script is only for VMWare WorkStation 8.0.2 or VMWare Player 4.0.2. Exiting pst007x@pst007x-Aspire-5741:~$ I have fully un-installed, and re-installed. I am installing the correct version. Probably a problem with the patch. VMware installs perfectly on Ubuntu 11.10 This is how I uninstalled.

  Read the article

• VPN issue: SSTP Service service started and then stopped

  - by Ampersand

  When I was trying to set up a VPN connect on my laptop running Windows 7 Ultimate, I got this error: Network Connections Cannot load the Remote Access Connection Manager service. Error 711: The operation could not finish because it could not start the Remote Access Connection Manager service in time. Please try the operation again. I traced through some service dependencies and discovered that Secure Socket Tunneling Protocol Service was set to Manual. However, when I try to manually start the service, I get: Services The Secure Socket Tunneling Protocol Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. Setting all the services involved to Automatic did not help. SSTP just showed Automatic and Stopped in the Services panel. I found a solution that involved booting in Safe Mode and deleting the contents of C:\Windows\System32\LogFiles\WMI\RtBackup. This solution worked, and I could set up a vpn connection, but only until I rebooted again. TL;DR I'm looking for a way to permanently enable Secure Socket Tunneling Protocol Service and other vpn-related services permanently so I don't have to reboot into safe mode and delete files every time I need to connect to a vpn.

  Read the article

• Is it normal to not have desktop effects after installing on an Asus N53S?

  - by Fabzter

  I've just installed 11.10 and so far so great, except I just discovered (after looking at another installation) I'm missing some effects. First of all, I am using unity 3d (I chose ubuntu at the login menu), and have already the correct nvidia drivers. Yet, my launcher is the same from unity 2d, the same as the app switcher, and when dragging windows to screen corners, they don't get grabbed. This "error" was present since the begining, so I was not able to detect it. Please help, I want to have an ubuntu experience as nice as everyone else. EDIT 1: I'm using an Asus N53S. My graphic card is Nvidia geforce GT540M. It says cuda, if that matters.

  Read the article

< Previous Page | 334 335 336 337 338 339 340 341 342 343 344 345  | Next Page >