Search Results

Search found 11897 results on 476 pages for 'dean rather'.

Page 339/476 | < Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >

• Latitude D600 USB port problem

  - by Moab

  Both USB ports stopped communicating on my D600, they have power, my optical mouse still lights up, no device works on the ports, everything is fine in Device manager in Dual boot XP and W7. Checked the bios, not much in there for USB. No usb device shows up when I use the F12 boot device menu either, so it must be some hardware issue. I have another hard drive with Ubuntu on it, popped it in and USB does not communicate with it either. Appears to have 5v but no communication, any Ideas besides another motherboard or USB card for the pcmcia slot (these don't work to well from my research)? I mostly use them for mass storage devices and pcmcia slots don't supply enough power for these devices. Thanks to all who answer with last ditch efforts. I hate to give up on it, its been good to me and still runs rather well for its vintage. EDIT: I did inspect the ports with a flashlight and did a partial disassembly of the laptop in an attempt to check the solder joints, but would require complete motherboard removal to see them, that is where I stopped. .

  Read the article

• Splitting an HTTP request into multiple byte-range requests

  - by redpola

  I have arrived at the unusual situation of having two completely independent Internet connections to my home. This has the advantage of redundancy etc but the drawback that both connections max out at about 6Mb/s. So one individual outbound http request is directed by my "intelligent gateway" (TP-LINK ER6120) out over one or the other connection for its lifetime. This works fine over complex web pages and utilises both external connects fine. However, single-http-request downloads are limited to the maximum rate of one of the two connections. So I'm thinking, surely I can setup some kind of proxy server to direct all my http requests to. For each incoming http request, the proxy server will issue multiple byte-range requests for the desired data and manage the reassembly and delivery of that data to the client's request. I can see this has some overhead, and also some edge cases where there will be blocking problems waiting for data. I also imagine webmasters of single-servers would rather I didn't hit them with 8 byte-range requests instead of one request. How can I achieve this http request deconstruct/reconstruction? Or am I just barking mad?

  Read the article

• Viability of Mac OS X 10.9 Time Machine Server in office environment

  - by user197609

  Currently we have about 20 Mac OS 10.9 MacBook Pros (almost all with SSDs) backing up to individual USB drives. I'd like to consolidate these to one drobo thunderbolt drive array attached to a Mac Mini server (running 10.9 server) using time machine server. My question is, will this scale to 20 users? Examples I have seen seem to be 5 or 6 users tops, and this isn't easy for me to test (I'd rather not ask everyone to backup to the array and then switch back to USB drives if it brings our network to its knees). My primary concern is saturating our gigabit network, as time machine backs up every hour for every machine, so there would usually be a couple people backing up at any given time. We also have some people occasionally on our 802.11ac network and not on ethernet (usually connected via 802.11n until people upgrade to newer machines), but most of the time people are connected to our thunderbolt displays which have a gigabit ethernet connection on them. Our network topology is one 32 port gigabit switch with 5 smaller gigabit switches at each desk cluster. The mac mini server is connected directly to the top level switch. Update: Failing information from someone who has done this in practice, I suppose my question is really around how switches work. If three or four people are backing up simultaneously, and then other two (different) users transfer a file between each other, will they be able to transfer the file at gigabit speeds?

  Read the article

• Re-packaging commercial software into RPM packages

  - by gac

  The situation is this - I have a small CentOS 5 "cluster" (currently 7 machines, but potential for more) which run a commercially available software package that's distributed essentially in tarball format (it's actually a zip file with a mixture of Windows/Linux binaries and an installation shell script with no potential for automation). I'd like to re-package this somehow into an RPM package (ideally that I can throw onto a self-hosted yum repository) in order to keep these "cluster" machines both up to date and consistent. I could do 7 manual installations, but there's scope for error. As I understand it, I'll need to accomplish the following tasks: add a non-privileged user to the target system for running the daemon without unnecessary root privileges package the binary files themselves up from the final installation location on a separate build machine (probably under /opt/package for sanity's sake). No source is available. add a firewall hole in order for the end-users to be able to communicate with the "cluster" nodes add a cron task which can start the daemon on @reboot I'm coming up with plenty of good packaging resources so far, but all are based on the traditional method (i.e. if I were the vendor packaging up my source files), rather than re-packaging a ton of binary files from an already-installed instance of the application, which is the only option available to me. Anyone have any good resources they can share for achieving this goal? Thanks!

  Read the article

• How do I tell Websphere 7 about a front end load balancer so that re-directs are handled correctly?

  - by TiGz

  On WebLogic 11G I can use the console to set the FrontendHost and FrondendPort on a server or on a cluster so that re-directs are handled correctly and end up resolving to the front end load balancer instead of the local host. The MBeans associated with this on WebLogic are, for example: MBean Name com.bea:Name=AdminServer,Type=WebServer,Server=AdminServer Attribute Name FrontendHost Description The name of the host to which all redirected URLs will be sent. If specified, WebLogic Server will use this value rather than the one in the HOST header. Sets the HTTP frontendHost Provides a method to ensure that the webapp will always have the correct HOST information, even when the request is coming through a firewall or a proxy. If this parameter is configured, the HOST header will be ignored and the information in this parameter will be used in its place. Type java.lang.String Readable / Writable RW How is the same thing achieved under Websphere 7? Follow up info: So I have 2 use cases actually. One is that I have a web app running under WebSphere on host A on port 9002 and a LB running on host B at port 80, when I visit the home page of the app via the LB on http://hostb/app the app redirects my browser to http://hostb:9002/app and it 404's I think this is WebSphere's fault but I guess it could be the app's fault? The second is that the web app in question needs to send emails containing URls that the customer can click on to get back into the web app - obviously this needs to be via the LB. On WebLogic the app uses MBeans to derive the LB url and I was hoping to use a similar mechanism on WebSphere.

  Read the article

• How do I get rid of these "There is a problem with your tablet driver" messages?

  - by Adam Rosenfield

  Every time I run certain applications (including but not limited to GIMP, Microsoft Visual Studio, and 3DS Max), I get the following message box: There is a problem with your tablet driver. Please reboot your system. If the problem persists reinstall or update the driver. Obviously I've tried rebooting and that hasn't fixed anything. Secondly, I'm not running a tablet PC. This is just Windows XP SP3 running on a Dell Precision PWS490 desktop workstation. How do I get rid of these error messages? The applications still load normally after dismissing them, but they're rather annoying. Using Process Explorer, I got the call stack from the message box. It's coming from wintab32.dll. Here's the call stack when running GIMP (irrelevant frames omitted): ... 8 USER32.dll!MessageBoxA+0x45 9 wintab32.dll!WTMgrPacketHookExA+0x44a 10 libgdk-win32-2.0-0.dll!gdk_display_list_devices+0x37 ... So, does anyone know how I can get an updated version of wintab32.dll or have any other ideas? I've been keeping my system up to date with Windows Updates. The timestamp on wintab32.dll is 2007-03-30 17:38, and its MD5 sum is ffdc332007c9dc6dd346c8ac2b09a015.

  Read the article

• Why does 64-bit Windows need a separate "Program Files (x86)" folder?

  - by Stephen Jennings

  I know that on a 64-bit version of Windows the "Program Files" folder is for 64-bit programs and the "Program Files (x86)" folder is for 32-bit programs, but why is this even necessary? By "necessary", I don't mean "why could Microsoft not have made any other design decisions?" because of course they could have. Rather, I mean, "why, given the current design of 64-bit Windows, must 32-bit programs have a separate top-level folder from 64-bit programs?" There are plenty of questions on Super User and elsewhere that assert "one is for 32-bit programs, one is for 64-bit programs", but none that I can find give the reason. From my experience, it doesn't seem to matter whether a 32-bit program is installed in the correct place or not. Does Windows somehow present itself differently to a program running out of "Program Files (x86)"? Is there a description that shows exactly what's different for a program installed in "Program Files (x86)" instead of "Program Files"? I think it's unlikely that Microsoft would introduce a new folder without a legitimate technical reason.

  Read the article

• How to secure a group of Amazon EC2 instances

  - by ks78

  I have several Amazon EC2 instances running Ubuntu 10.04 and I've recently started using Amazon's Route 53 as my DNS. The purpose of doing that was to allow the instances to refer to each other by name rather than private IP (which can change). I've pointed my domain name (via GoDaddy) to Amazon's name servers, allowing me to access my EC2 webservers. However, I noticed I can now access the EC2 instances which I don't want to be public, such as the dedicated MySQL Server. I was thinking Amazon's Security Groups would still be in effect when using Route 53, but that doesn't seem to be the case. Before I started using Route 53, I was thinking of having one instance run a reverse proxy, which would help protect the web servers behind it. Then IP-restrict all the other instances. I know IP restricting can be done using the firewall within each instance, but should I ever need to access them from another IP address, I'd need a way in. Amazon's control panel made it a breeze to open a port when necessary. Does anyone have any suggestions for keeping EC2 instances secure, but also accessible to their administrator? Also, what's the best topology for a group of EC2 instances, consisting of web servers and a dedicated database server, from a security perspective? Does having a reverse proxy server even make sense?

  Read the article

• Why does my computer not always automatically request a new DHCP lease when switching networks?

  - by KingJ

  I've noticed an interesting problem recently where my laptop will not automatically refresh my DHCP lease when changing between wireless networks. Instead, it will attempt to use the existing lease for the new network. Of course, since each network has different settings any connections will fail when using the old lease. While Windows will eventually request a new DHCP lease, it's often much faster for me to release the old lease and request a new, correct, lease. It puzzles me as to why this is not automatically done when associating to the network? One possible cause is that the laptop is put to sleep while connected to one network, then woken when in range of the other network. Nevertheless, I would expect that the lease would be renewed when the laptop associates to the other network rather than attempting to use the old lease. It should be noted that the two networks are completely different, both in terms of size, number of APs, network settings, SSIDs etc. One network is my home network and the other one is the campus-wide network at my University.

  Read the article

• How to safely send newsletters on VPS (SMTP) w/ non-hosted domain as "From" email?

  - by Andy M

  Greetings, I'm trying to understand the safest way to use SMTP. I'm considering purchasing a second virtual server mainly for email sending, on which I will set up PHPlist (a free open-source mailing program), so we have the freedom to send unlimited newsletters (...well, 10,000 per day at least, which requires a VPS rather than shared hosting). Here's my current setup with a paid mass-mailing software: I have a website - let's call it MyHostedDomain.org. I send newsletters with the From / Reply To address as [email protected], which isn't being hosting by me but I have access to the email account. Can I more or less safely set this up with an SMTP server on a VPS? i.e. send messages using [email protected] as the visible address, but having it all go through my VPS SMTP? I cannot authenticate it, right? Is this too risky a practice? Is my only hope to use an address with a domain on the VPS, i.e. [email protected]? I already have a Reverse DNS record for the domain hosted on my current VPS. I also see other suggestions, like SenderID and DKIM. But with all these things combined, will this still work? I don't want to get blacklisted, but the good thing is this is a somewhat private list, and users opt-in to subscribe. So it's a self-made audience. (If it makes you feel better, this is related to a non-profit activity, not some marketing scam...it's for a good cause, I assure you!)

  Read the article

• Web service for checking out / leasing a token

  - by JP Slavinsky

  I run a web site on AWS that has a number of web servers (say 4 of them) running behind a load balancer. For this particular web site, I have one license key of New Relic for doing instrumentation. At any one time, I only want one of the 4 web servers to be using the key. If that server goes offline, I want one of the remaining web servers to be able to begin using the license key. Does anyone know of a service that would let me manage this process? The service would not particularly need to store the key itself but rather just manage the fact that only one web server can lease out the right to use the key at any time. Something where the web servers would have to come back every few minutes and renew their lease, and if they don't it becomes available to someone else. I just realized I could maybe accomplish a hacked version of this using a file on S3, but that doesn't prevent race conditions / etc and is definitely hackish. Any thoughts welcome. FWIW, this site is built on Ruby on Rails. Thanks! JP

  Read the article

• Triple-Boot + 4 partition Limit

  - by dsimcha

  I just bought a new hard drive so that I could convert my XP-only machine into an XP-Ubuntu-Windows 7 triple boot machine. Since the drive is absurdly huge (1 TB) I wouldn't mind throwing ReactOS into the mix, too. I just found out that master boot records are limited to 4 entries, meaning 4 primary partitions. I had Windows XP set up on my old drive as a boot partition, a program files partition and a media partition. Since I really didn't want to install XP from scratch, I cloned this setup on my new drive. This leaves me one MBR partition entry for installing Windows 7, Ubuntu and ReactOS. I'd like to avoid having to install XP from scratch like the plague, partly because it's supposed to be a safety net in case things go wrong with my other OS's and because I've invested a lot of time getting it set up exactly the way I like it. Here are the options I've considered and why I don't like them: Install Windows 7 on my media partition. This would work, but I prefer to keep my media partition completely separate from any OS, so that I can reformat an OS partition without affecting my media partition at all. Use wubi or something to install Ubuntu in the same partition as something else. Again, this is brittle. Move all my media to a logical drive on an extended partition. Create another logical drive on this extended partition for Ubuntu. The problem here is that extended partitions are rather brittle--if you nuke one, it renders the rest useless. Just put the old drive back in my computer and run XP off it. Use the new one for the other OS's. The problem here is that the old drive is slower and uses extra power, generates extra heat, etc. Can anyone suggest any other possibilities that I may have overlooked?

  Read the article

• Router that allows custom Dynamic DNS server [closed]

  - by Thuy

  I've made my own DDNS service and it works fine using an application running on clients to update the IP. But if for some reason I don't have the choice of using my software and instead I need to use a router to update the IP, it becomes troublesome. For example, I needed to setup IPsec from a customer to me and the customers router/firewall (netgear srx5308) has a dynamic IP which is given from the ISP which can't offer static IPs. So it needs to use dynamic dns for it to work. In this case there really isn't a client to run the software on since it's a router/firewall. Unfortunately it seems that most routers are rather unfriendly towards custom DDNS solutions and most offer only dyndns.com or similar templates. Which was the case with this router too. Leaving me with no way to use my own dynamic dns server IP. I have the option of switching out the customers router and I've been looking around for alternatives and other routers/solutions and I was wondering if anyone on this great site might have been in a similar situation or might just know about some router/firewall that is more friendly towards custom ddns solutions that I might be able to use. Thanks in advance for any help or guidance!

  Read the article

• How can I create a separate toolbar from the Task Bar?

  - by Iszi

  In Windows XP, you could separate toolbars from the Task Bar by dragging them to the desktop. They could then be left lying about anywhere on your screen or, my preferred option, docked to any side of the screen. I found this particularly useful to keep a handy list of common phone numbers quickly accessible. I'd create a new toolbar pointing to a custom folder, and put a bunch of dead shortcuts in the folder that had names and numbers as their file names. I'd then dock the toolbar to the left side, set it to auto-hide and always on top (options which could be set separate from the Task Bar as well) and it would be readily available no matter what else I was doing on my system. However, on my Windows 7 system, I seem unable to perform the crucial step of pulling the new toolbar off of the Task Bar. This is of course with the Task Bar "unlocked" so that I can move all my toolbars around. Is there something I'm missing here, or is this a feature that's been disabled in Windows 7? Is there any way to re-enable it, or otherwise achieve similar functionality? I'd rather be able to do this without additional software, if possible.

  Read the article

• Are ZFS snapshots + S3 a viable backup system for several VMs and general fileserver storage?

  - by AllanA

  I've been tasked with setting up a backup system for my small office (around 12 people). Most of our production stuff is on the AWS cloud, so what I need to back up are some small office/development files (under 100G right now), plus our operational VMs and development, which round out to a bit under 1T. I just need something reliable, convenient, and straightforward. I'm comfortable with Linux, FreeBSD, and to some extent Solaris 10, so I'm leaning toward a full server rather than an appliance system ala Openfiler or FreeNAS. What I'm contemplating is a small fileserver for general storage and nightly backups of the virtual machines, followed up by an offsite backup to Amazon's S3 storage service. It'd be the usual incremental backups nightly and full backup weekly. My question is if using ZFS snapshots, both locally and dumped to S3 via 'zfs send [-i]', is a viable backup tool? Or should I stick to using Duplicity, or some other method entirely? ZFS snapshots on the internal fileserver/backup machine sound like a perfect way to provide quick and convenient data recovery, so I'm likely to go with that for local redundancy. (If you folks see scenarios where relying on ZFS snapshots would be worse than a more traditional archiving backup, feel free to convince me.) But are snapshots flexible enough to lean on for recovery from the loss of my backup server? Or am I better off with something more traditional? (feel free to recommend free or commercial backup solutions you favor.)

  Read the article

• NAS for Mac OS X Server

  - by SamAdmin

  I'm using Mac OS X Server and want to allow the users that connect to their network accounts to store their data on a NAS drive. I want the users to connect to the Lion server as this allows for better policies and management for me and for their afp share to be located on a NAS drive. I've looked into home directories and network logins however I don't want the users to connect into a different login environment, just an authentication against their provided account on the Lion server and for their finder to take them to their own storage area - located on the NAS drive. Currently I am using FreeNAS for both authentication and storage however there are getting to be far too many people to manage each afp share and account, plus just using FreeNAS is extremely limiting for expansion and if something goes wrong with 1 entity the entire system goes down. Using the Lion server for user accounts and policies will be much better for this expanding business. I have looked into LDAP, using the Lion server as an LDAP server to authenticate against for FreeNAS however I have had issues with this and thought a different approach could be better from the other side of the situation... Providing the account with somewhere to store data rather than the afp share authenticating against an LDAP server. I am wrong to try it this way? Is it possible to logically add storage to a Mac OS X Server which can be recognised as a local drive, so can be used for network accounts?

  Read the article

• I think my laptop just died

  - by Joel Coehoorn

  I have a Dell 1330M that as of about 15 minutes ago will no longer POST. What happened was I was working, stepped away for a moment, and when I came back it was turned off. I thought that was odd, but turned it on and things seemed fine. About 1/2 hour later it crashed and restarted, but came up fine again. It did this once more. At this point I was starting to get worried, but I hadn't had any problems with the laptop before and every crash was after doing some work in a virtual machine that I don't often use, so I at put the blame there. It didn't feel like it was overheating anywhere and there's no ozone smell of overheated electronics. Then it crashed a final time and now when I turn it on all I see is a bright screen with a bunch of vertical lines (noise). I've tried removing the memory sticks one at a time, but I get the same result with either memory stick in either slot. With no memory at all it stops earlier in the POST process and the screen is completely blank (black, no backlight). As I type this, I hear a double beep from the system about once every 10 minutes. I'm pretty sure the hard drive is fine because it fails during post, before anything off the drive is needed. The power supply seems good because the screen is nice and bright. It's not the RAM because swapping that around made no difference. The leaves motherboard (which I doubt and can replace) and CPU (which just might be changable). Any ideas? Is there any hope for this laptop? I'm rather fond of it and I'd have a hard time replacing it with anything near as nice.

  Read the article

• How do I automatically connect my client to an ODBC data source on another machine with dynamic IP?

  - by Kdansky

  At the customer's place, we've got a postgres DB on a server, and a few clients. We connect them through ODBC-drivers, and all machines run windows (usually XP). Now we had a few annoying issues: The client "forgets" some flags in the ODBC drivers, such as ByteA as LO. Every time anything changes, we have to reset that, and type in the password, and sometimes even the IP of the server. On x64 machines running Windows 7, configuring this is a pain as the system settings dialogue will only show 64-bit connections by default. And most importantly: If the server changes IP because the customer restarts or replaces a switch, all connections are lost. Annoyingly, this cannot be fixed with just correcting the IP, but rather, we have to check every single place (even hba_conf) because all the settings magically disappear. Our customers often are very small companies, where "server" means "that one PC in the other room", and not "Oracle mainframe in the dungeon", so we don't want to rely on them not restarting switches. Is there a better way than to rely on these really unstable settings? Are these settings somewhere in a file which I could edit manually, to make fixing it easier?

  Read the article

• PHP unable to allocate memory.

  - by AlReece45

  On my way to the office this morning, every website on our shared VPS started giving the same error (several times, not the typical memory_limit error which is fatal): Warning: Unknown: Unable to allocate memory for pool. in Unknown on line 0 The shared server is a 64-bit OpenVZ container running cPanel. There are only ~6 VPSes on the host-- this is the largest one at only 4GB. The host itself has 24GB RAM. As the below graphs show, the memory usage on the host and VPS are both rather low. CPU Usage/Disk/Host all seem to be normal. RlimitMem was set to 583653034, yet the memory usage is about the same as it usually is. Apache 2.2, PHP 5.2 (mod_php) Restarting Apache has corrected the problem for now. However, I'd like to prevent it from happening again and I'm not sure what was limiting the memory. RlimitMem was set to 583653034, yet the memory usage is about the same as it usually is. There's seems to be plenty of memory: what caused this error? VPS Memory Usage Host Memory Usage APC Information apc.ttl=0 apc.shm_size=0 apc.mmap_file_mask=(blank) 1 Segment(s) with 32.0 MBytes (mmap memory, pthread mutex locking)

  Read the article

• nginx won't serve an error_page in a subdirectory of the document root

  - by Brandan

  (Cross-posted from Stack Overflow; could possibly be migrated from there.) Here's a snippet of my nginx configuration: server { error_page 500 /errors/500.html; } When I cause a 500 in my application, Chrome just shows its default 500 page (Firefox and Safari show a blank page) rather than my custom error page. I know the file exists because I can visit http://server/errors/500.html and I see the page. I can also move the file to the document root and change the configuration to this: server { error_page 500 /500.html; } and nginx serves the page correctly, so it's doesn't seem like it's something else misconfigured on the server. I've also tried: server { error_page 500 $document_root/errors/500.html; } and: server { error_page 500 http://$http_host/errors/500.html; } and: server { error_page 500 /500.html; location = /500.html { root /path/to/errors/; } } with no luck. Is this expected behavior? Do error pages have to exist at the document root, or am I missing something obvious? Update 1: This also fails: server { error_page 500 /foo.html; } when foo.html does indeed exist in the document root. It almost seems like something else is overwriting my configuration, but this block is the only place anywhere in /etc/nginx/* that references the error_page directive. Is there any other place that could set nginx configuration?

  Read the article

• Windows XP usb drivers reinstalling upon reboot

  - by iWerner

  We have a Windows XP SP3 laptop (Acer Travelmate 7320) to which we connect a variety of astronomy equipment (a telescope, its mount, some cameras and others) all of which connect through USB. When we plug in these devices, Windows tells us that it detects the hardware and installs the driver. All of these devices then function correctly using the software that came from the vendor (unfortunately, one of the vendors does not support Vista 64, and that is why we're using our XP laptop). However when we reboot the computer we experience a variety of symptoms: Windows reports that it found new hardware for some of the devices and tries to reinstall their drivers, and for some of the other devices needs to be unplugged and plugged in again before they are detected again by the operating system, in which case Windows still tries to reinstall their drivers. It is as if Windows does not remember that it has already installed the drivers. Is this a common problem on Windows XP? If so, what can be done about it? Should we rather be looking at the laptop's firmware and drivers? We've looked into updating the drivers for the chipset, but this did not solve the problem. Thank you in advance.

  Read the article

• Reverse SSH tunnel: how can I send my port number to the server?

  - by Tom

  I have two machines, Client and Server. Client (who is behind a corporate firewall) opens a reverse SSH tunnel to Server, which has a publicly-accessible IP address, using this command: ssh -nNT -R0:localhost:2222 [email protected] In OpenSSH 5.3+, the 0 occurring just after the -R means "pick an available port" rather than explicitly calling for one. The reason I'm doing this is because I don't want to pick a port that's already in use. In truth, there are actually many Clients out there that need to set up similar tunnels. The problem at this point is that the server does not know which Client is which. If we want to connect back to one of these Clients (via localhost) then how do we know which port refers to which client? I'm aware that ssh reports the port number to the command line when used in the above manner. However, I'd also like to use autossh to keep the sessions alive. autossh runs its child process via fork/exec, presumably, so that the output of the actual ssh command is lost in the ether. Furthermore, I can't think of any other way to get the remote port from Client. Thus, I'm wondering if there is a way to determine this port on Server. One idea I have is to somehow use /etc/sshrc, which is supposedly a script that runs for every connection. However, I don't know how one would get the pertinent information here (perhaps the PID of the particular sshd process handling that connection?) I'd love some pointers. Thanks!

  Read the article

• Apache intermittently aborting requests

  - by Adam Phillips

  I have just been dealing with a problem whereby http requests are being aborted, seemingly at random. On any particular page in the website, when you opened a page, a number of the assets (img, css, etc) failed to load. If you refreshed, the page may work fine, the same set of assets may fail to load or different assets may fail to load. The net tab in firefox was returning 'Aborted' in the HTTP status code column for the failed assets, even tho in the case of images, the image previews were still working. There was nothing in any of the apache logs about the requests that failed, however since it seemed to point to an apache issue, we restarted apache. The first time we tried, it made no difference but about 10 minutes later, in the absence of a better solution we tried again. Bizarrely, the problem disappeared immeadiately. So now the site seems to be running fine again but its rather unsettling, both the intermittent nature of the problem and the lack of an explanation for its resolution. Has anyone seen anything like this before and if so did you find out the reason behind it? Many Thanks

  Read the article

• What kind of hosting do I need? [closed]

  - by Robert Smith

  I have been trying to answer this question but I haven't found an specific answer to my situation. As I want to pay for what I need, I thought I could get a good answer here. I have custom made forum (rather than a built-in forum like the ones you can find as plugins, e.g. WP-Forum or phpBB type of software) in Django. I don't want to use Apache and modwsgi because it's usually very memory-hungry and I can't afford a big server. I prefer a combination of nginx and gunicorn which I think is very efficient (maybe you can also tell me what you think about that). I'm expecting to receive 10,000 to 20,000 visits each month with 15,000 to 30,000 page impressions. I have reviewed some cloud services like Amazon EC2 or Rackspace and other more traditional services (Linodo). This site won't use videos or big images and I certainly don't need a huge amount of bandwidth (200GB would be definitely too much). I need shell access so shared hosting is out of the question. What do I need to run a website like that without problems? What about RAM? 256MB would be enough (that's the amount of RAM offered by small instances in Amazon and Rackspace)? Do you know of any alternative to those I mentioned? If you need more information to provide a useful answer, please don't hesitate to ask. Thanks a lot.

  Read the article

• Command or tool to display list of connections to a Windows file share

  - by BizTalkMama

  Is there a Windows command or tool that can tell me what users or computers are connected to a Windows fileshare? Here's why I'm looking for this: I've run into issues in the past where our deployment team has deployed BizTalk applications to one of our environments using the wrong bindings, leaving us with two receive locations pointing to the same file share (i.e. both dev and test servers point to dev receive location uri). When this occurs, the two environments in question tend to take turns processing the files received (meaning if I am attempting to debug something in one environment and the other environment has picked the file up, it looks as if my test file has disappeared into thin air). We have several different environments, plus individual developer machines, and I'd rather not have to check each individually to find the culprit. I'm looking for a quick way to detect what locations are connected to the share once I notice my test files vanishing. If I can determine the connections that are invalid, I can go directly to the person responsible for that environment and avoid the time it takes to randomly ask around. Or if the connections appear to be correct, I can go directly to troubleshooting where in the process the message gets lost. Any suggestions?

  Read the article

< Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >