Search Results

Search found 11409 results on 457 pages for 'large teams'.

Page 339/457 | < Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >

  • Current State EA: Focus on the Integration!!!

    - by Eric A. Stephens
    A recent project has me at the front end of a large implementation effort covering multiple software components. In addition to the challenges of integrating 15-20 separate and new software components there is the challenge of integrating the portfolio into an existing environment. Like other clients I've worked with and other environments I've worked in for many years, this is typical. The applications are undocumented and under patched leading to a mystery for any architect leading change.  We can boil down most architecture development methodologies (ADM) into first understanding the current/baseline state and then envisioning one or more future states. Many pundits emphasize the need to focus on the future/target states. I agree since enterprise architecture (EA) is about where you are going and not so much where you have been. But to be effective in the future, I contend some focused time needs to be spent on the current state. And specifically on the integration. Integration is always the difficult part of a project (I might put it more coarsely at a cocktail party). While I don't have a case study, my anecdotal experience suggests poorly integrated application portfolios tend to cost more to operate and create entropy when trying to respond to new changes and opportunities. In the aforementioned project, I was able to get one of our EAs assigned to focus on just integration almost immediately. While we're still early in the process, this EA is uncovering all sorts of information that will greatly assist our future state planning for this solution. This information is driving early decision making that we anticipate will accelerate our efforts moving forward. #next_pages_container { width: 5px; hight: 5px; position: absolute; top: -100px; left: -100px; z-index: 2147483647 !important; } #next_pages_container { width: 5px; hight: 5px; position: absolute; top: -100px; left: -100px; z-index: 2147483647 !important; } #next_pages_container { width: 5px; hight: 5px; position: absolute; top: -100px; left: -100px; z-index: 2147483647 !important; } #next_pages_container { width: 5px; hight: 5px; position: absolute; top: -100px; left: -100px; z-index: 2147483647 !important; }

    Read the article

  • "Hello World" in C++ AMP

    - by Daniel Moth
    Some say that the equivalent of "hello world" code in the data parallel world is matrix multiplication :) Below is the before C++ AMP and after C++ AMP code. For more on what it all means, watch the recording of my C++ AMP introduction (the example below is part of the session). void MatrixMultiply(vector<float>& vC, const vector<float>& vA, const vector<float>& vB, int M, int N, int W ) { for (int y = 0; y < M; y++) { for (int x = 0; x < N; x++) { float sum = 0; for(int i = 0; i < W; i++) { sum += vA[y * W + i] * vB[i * N + x]; } vC[y * N + x] = sum; } } } Change the function to use C++ AMP and hence offload the computation to the GPU, and now the calling code (which I am not showing) needs no changes and the overall operation gives you really nice speed up for large datasets…  #include <amp.h> using namespace concurrency; void MatrixMultiply(vector<float>& vC, const vector<float>& vA, const vector<float>& vB, int M, int N, int W ) { array_view<const float,2> a(M, W, vA); array_view<const float,2> b(W, N, vB); array_view<writeonly<float>,2> c(M, N, vC); parallel_for_each( c.grid, [=](index<2> idx) mutable restrict(direct3d) { float sum = 0; for(int i = 0; i < a.x; i++) { sum += a(idx.y, i) * b(i, idx.x); } c[idx] = sum; } ); } Again, you can understand the elements above, by using my C++ AMP presentation slides and recording… Stay tuned for more… Comments about this post welcome at the original blog.

    Read the article

  • ArchBeat Link-o-Rama for 2012-10-12

    - by Bob Rhubart
    This is your brain on IT architecture. Oracle Technology Network Architect Day in Los Angeles, Oct 25 This is your brain on IT architecture. Stuff your cranium with architecture by attending Oracle Technology Network Architect Day in Los Angeles, October 25, 2012, at the Sofitel Los Angeles, 8555 Beverly Boulevard, Los Angeles, CA 90048. Technical sessions, panel Q&A, and peer roundtables--plus a free lunch. Register now. WebCenter Sites Gadget Development Concepts Quickstart | John Brunswick What are Gadgets? "At their most basic level they can be thought of as lightweight portlets that run largely on the client side of an architecture," says John Brunswick. "Gadgets provide a cross-platform container to run reusable UI modules that generally expose dynamic information to an end user, allowing for some level of end user customization." ORCLville: OOW 2012 - A Not So Brief Recap Oracle ACE Director Floyd Teter, an Applications & Apps Technology specialists, shares his personal, frank, and and extensive recap or Oracle OpenWorld 2012. Fusion Applications Technical Tips | Naveen Nahata "Setting memory parameters for Admin and Managed servers of various domains in Fusion Applications can be, let us say, a little daunting," says Oracle Fusion Middleware A-Team member Naveen Nahata. "While all this may look complicated and intimidating, it is actually relatively simple once you understand how it all works." Following the Thread in OSB | Antony Reynolds Antony Reynolds recently led an Oracle Service Bus POC in which his team needed to get high throughput from an OSB pipeline. "Imagine our surprise when, on stressing the system, we saw it lock up, with large numbers of blocked threads." He shares the details of the problem and the solution in this extensive technical post. ExaLogic Hackers Night - November 19th Nürnberg Germany | WebLogic Partner Community EMEA Want to get your hands on Oracle Exalogic? Make your way to Nürnberg, Germany for this Exalogic Hacker's Night on November 19, 2012. Experts will be on hand to help you test your ideas. (The blog post is in English, but the event registration page is in German.) Thought for the Day "A foolish consistency is the hobgoblin of little minds…" — Ralph Waldo Emerson (May 25, 1803 – April 27, 1882) Source: SoftwareQuotes.com

    Read the article

  • Why JSF Matters (to You)

    - by reza_rahman
          "Those who have knowledge, don’t predict. Those who predict, don’t have knowledge."                                                                                                    – Lao Tzu You may have noticed Thoughtworks recently crowned the likes AngularJS, etc imminent successors to server-side web frameworks. They apparently also deemed it necessary to single out JSF for righteous scorn. I have to say as I was reading the analysis I couldn't help but remember they also promptly jumped on the Ruby, Rails, Clojure, etc bandwagon a good few years ago seemingly similarly crowing these dynamic languages imminent successors to Java. I remember thinking then as I do now whether the folks at Thoughtworks are really that much smarter than me or if they are simply more prone to the Hipster buzz of the day. I'll let you make the final call on that one. I also noticed mention of "J2EE" in the context of JSF and had to wonder how up-to-date or knowledgeable the person writing the analysis actually was given that the term was basically retired almost a decade ago. There's one thing that I am absolutely sure about though - as a long time pretty happy user of JSF, I had no choice but to speak up on what I believe JSF offers. If you feel the same way, I would encourage you to support the team behind JSF whose hard work you may have benefited from over the years. True to his outspoken character PrimeFaces lead Cagatay Civici certainly did not mince words making the case for the JSF ecosystem - his excellent write-up is well worth a read. He specifically pointed out the practical problems in going whole hog with bare metal JavaScript, CSS, HTML for many development teams. I'll admit I had to smile when I read his closing sentence as well as the rather cheerful comments to the post from actual current JSF/PrimeFaces users that are apparently supposed to be on a gloomy death march. In a similar vein, OmniFaces developer Arjan Tijms did a great job pointing out the fact that despite the extremely competitive server-side Java Web UI space, JSF seems to manage to always consistently come out in either the number one or number two spot over many years and many data sources - do give his well-written message in the JAX-RS user forum a careful read. I don't think it's really reasonable to expect this to be the case for so many years if JSF was not at least a capable if not outstanding technology. If fact if you've ever wondered, Oracle itself is one of the largest JSF users on the planet. As Oracle's Shay Shmeltzer explains in a recent JSF Central interview, many of Oracle's strategic products such as ADF, ADF Mobile and Fusion Applications itself is built on JSF. There are well over 3,000 active developers working on these codebases. I don't think anyone can think of a more compelling reason to make sure that a technology is as effective as possible for practical development under real world conditions. Standing on the shoulders of the above giants, I feel like I can be pretty brief in making my own case for JSF: JSF is a powerful abstraction that brings the original Smalltalk MVC pattern to web development. This means cutting down boilerplate code to the bare minimum such that you really can think of just writing your view markup and then simply wire up some properties and event handlers on a POJO. The best way to see what this really means is to compare JSF code for a pretty small case to other approaches. You should then multiply the additional work for the typical enterprise project to try to understand what the productivity trade-offs are. This is reason alone for me to personally never take any other approach seriously as my primary web UI solution unless it can match the sheer productivity of JSF. Thanks to JSF's focus on components from the ground-up JSF has an extremely strong ecosystem that includes projects like PrimeFaces, RichFaces, OmniFaces, ICEFaces and of course ADF Faces/Mobile. These component libraries taken together constitute perhaps the largest widget set ever developed and optimized for a single web UI technology. To begin to grasp what this really means, just briefly browse the excellent PrimeFaces showcase and think about the fact that you can readily use the widgets on that showcase by just using some simple markup and knowing near to nothing about AJAX, JavaScript or CSS. JSF has the fair and legitimate advantage of being an open vendor neutral standard. This means that no single company, individual or insular clique controls JSF - openness, transparency, accountability, plurality, collaboration and inclusiveness is virtually guaranteed by the standards process itself. You have the option to choose between compatible implementations, escape any form of lock-in or even create your own compatible implementation! As you might gather from the quote at the top of the post, I am not a fan of crystal ball gazing and certainly don't want to engage in it myself. Who knows? However far-fetched it may seem maybe AngularJS is the only future we all have after all. If that is the case, so be it. Unlike what you might have been told, Java EE is about choice at heart and it can certainly work extremely well as a back-end for AngularJS. Likewise, you are also most certainly not limited to just JSF for working with Java EE - you have a rich set of choices like Struts 2, Vaadin, Errai, VRaptor 4, Wicket or perhaps even the new action-oriented web framework being considered for Java EE 8 based on the work in Jersey MVC... Please note that any views expressed here are my own only and certainly does not reflect the position of Oracle as a company.

    Read the article

  • SQL Saturday 43 (Redmond, WA) Review

    - by BuckWoody
    Last Saturday (June 12th) we held a “SQL Saturday” (more about those here) event in Redmond, Washington. The event was held at the Microsoft campus, at the Mixer in our new location called the “Commons”. This is a mall-like area that we have on campus, and the Mixer is a large building with lots of meeting rooms, so it made a perfect location for the event. There was a sign to find the parking, and once there they had a sign to show how to get to the building. Since it’s a secure facility, Greg Larsen and crew had a person manning the door so that even late arrivals could get in. We had about 400 sign up for the event, and a little over 300 attend (official numbers later). I think we would have had a lot more, but the sun was out – and you just can’t underestimate the effect of that here in the Pacific Northwest. We joke a lot about not seeing the sun much, but when a day like what we had on Saturday comes around, and on a weekend at that, you’d cancel your wedding to go outside to play in the sun. And your spouse would agree with you for doing it. We had some top-notch speakers, including Clifford Dibble and Kalen Delany. The food was great, we had multiple sponsors (including Confio who seems to be at all of these) and the attendees were from all over the professional spectrum, from developers to BI to DBA’s. Everyone I saw was very engaged, and when I visited room-to-room I saw almost no one in the halls – everyone was in the sessions. I also saw a much larger Microsoft presence this year, especially from Dan Jones’ team. I had a great turnout at my session, and yes, I was wearing an Oracle staff shirt. I did that because I wanted to show that the session I gave on “SQL Server for the Oracle DBA” was non-marketing – I couldn’t exactly bash Oracle wearing their colors! These events are amazing. I can’t emphasize enough how much I appreciate the volunteers and how much work they put into these events, and to you for coming. If you’re reading this and you haven’t attended one yet, definitely find out if there is one in your area – and if not, start one. It’s a lot of work, but it’s totally worth it.       Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Contract / Project / Line-Item hierarchy design considerations

    - by Ryan
    We currently have an application that allows users to create a Contract. A contract can have 1 or more Project. A project can have 0 or more sub-projects (which can have their own sub-projects, and so on) as well as 1 or more Line. Lines can have any number of sub-lines (which can have their own sub-lines, and so on). Currently, our design contains circular references, and I'd like to get away from that. Currently, it looks a bit like this: public class Contract { public List<Project> Projects { get; set; } } public class Project { public Contract OwningContract { get; set; } public Project ParentProject { get; set; } public List<Project> SubProjects { get; set; } public List<Line> Lines { get; set; } } public class Line { public Project OwningProject { get; set; } public List ParentLine { get; set; } public List<Line> SubLines { get; set; } } We're using the M-V-VM "pattern" and use these Models (and their associated view models) to populate a large "edit" screen where users can modify their contracts and the properties on all of the objects. Where things start to get confusing for me is when we add, for example, a Cost property to the Line. The issue is reflecting at the highest level (the contract) changes made to the lowest level. Looking for some thoughts as to how to change this design to remove the circular references. One thought I had was that the contract would have a Dictionary<Guid, Project> which would contain ALL projects (regardless of their level in hierarchy). The Project would then have a Guid property called "Parent" which could be used to search the contract's dictionary for the parent object. THe same logic could be applied at the Line level. Thanks! Any help is appreciated.

    Read the article

  • 4.8M wasn't enough so we went for 5.055M tpmc with Unbreakable Enterprise Kernel r2 :-)

    - by wcoekaer
    We released a new set of benchmarks today. One is an updated tpc-c from a few months ago where we had just over 4.8M tpmc at $0.98 and we just updated it to go to 5.05M and $0.89. The other one is related to Java Middleware performance. You can find the press release here. Now, I don't want to talk about the actual relevance of the benchmark numbers, as I am not in the benchmark team. I want to talk about why these numbers and these efforts, unrelated to what they mean to your workload, matter to customers. The actual benchmark effort is a very big, long, expensive undertaking where many groups work together as a big virtual team. Having the virtual team be within a single company of course helps tremendously... We already start with a very big server setup with tons of storage, many disks, lots of ram, lots of cpu's, cores, threads, large database setups. Getting the whole setup going to start tuning, by itself, is no easy task, but then the real fun starts with tuning the system for optimal performance -and- stability. A benchmark is not just revving an engine at high rpm, it's actually hitting the circuit. The tests require long runs, require surviving availability tests, such as surviving crashes -and- recovery under load. In the TPC-C example, the x4800 system had 4TB ram, 160 threads (8 sockets, hyperthreaded, 10 cores/socket), tons of storage attached, tons of luns visible to the OS. flash storage, non flash storage... many things at high scale that all have to be perfectly synchronized. During this process, we find bugs, we fix bugs, we find performance issues, we fix performance issues, we find interesting potential features to investigate for the future, we start new development projects for future releases and all this goes back into the products. As more and more customers, for Oracle Linux, are running larger and larger, faster and faster, more mission critical, higher available databases..., these things are just absolutely critical. Unrelated to what anyone's specific opinion is about tpc-c or tpc-h or specjenterprise etc, there is a ton of effort that the customer benefits from. All this work makes Oracle Linux and/or Oracle Solaris better platforms. Whether it's faster, more stable, more scalable, more resilient. It helps. Another point that I always like to re-iterate around UEK and UEK2 : we have our kernel source git repository online. Complete changelog of the mainline kernel, and our changes, easy to pull, easy to dissect, easy to know what went in when, why and where. No need to go log into a website and manually click through pages to hopefully discover changes or patches. No need to untar 2 tar balls and run a diff.

    Read the article

  • Oracle OpenWorld - Events of Interest

    - by Larry Wake
    I mentioned the "Focus On Oracle Solaris" document the other day, which lists many of the Solaris-related events at Oracle OpenWorld this year; today I thought I'd highlight a few sessions you might find interesting. Monday, October 1st: 4:45 PM - Get Proactive: Best Practices for Maintaining and Upgrading Oracle Solaris (Moscone South 252) This session covers best practices for upgrading and patching and how to take advantage of unique technologies in Oracle Solaris 10 and 11. Learn how to get maximum value from My Oracle Support for both reactive and proactive requirements. Understand the benefits of secure remote access and how Oracle Support experts use collaborative shared sessions combined with Oracle Solaris technologies such as DTrace. Tuesday, October 2nd: 10:15 AM -  How to Increase Performance and Agility with an Open Data Center Fabric (Moscone South 200) If you haven't had a chance to hear about Xsigo Systems, this is a golden opportunity while you're at OpenWorld. Now part of Oracle, Xsigo's network virtualization technology is designed to increase both application performance and management efficiency, through a combination of software-defined network technology and the industry’s fastest fabric, allowing data center to converge Ethernet and Fibre Channel connectivity to a single fabric, to reduce complexity by 70 percent and CapEx by 50 percent while providing more I/O bandwidth to your applications. Wednesday, October 3rd: 10:15 AM - General Session: Oracle Solaris 11 Strategy, Engineering Insights, and Roadmap (Moscone South 103) Markus Flierl, head of Oracle Solaris Core Engineering, will outline the strategy and roadmap for Oracle Solaris,  how Oracle Solaris 11 is being deployed in cloud computing and the unique optimizations in Oracle Solaris 11 for the Oracle stack. The session also offers a sneak peek at the latest technology under development in Oracle Solaris, and what customers can expect to see in the coming updates. Plus, there are several Hands-On Labs: Monday, October 1st: 10:45 AM - 11:45 AM - Reduce Risk with Oracle Solaris Access Control to Restrain Users and Isolate Applications (Marriott Marquis - Salon 14/15) 4:45 PM - 5:45 PM - Managing Your Data with Built-In Oracle Solaris ZFS Data Services in Release 11  (Marriott Marquis - Salon 14/15) Tuesday, October 2nd: 1:15 PM - 2:15 PM - Virtualizing Your Oracle Solaris 11 Environment  (Marriott Marquis - Salon 10/11) Wednesday, October 3rd: 3:30 PM - 4:30 PM - Large-Scale Installation and Deployment of Oracle Solaris 11 (Marriott Marquis - Salon 14/15) There's plenty more--see the "Focus On Oracle Solaris" guide. See you next week in San Francisco!

    Read the article

  • What is a good design model for my new class?

    - by user66662
    I am a beginning programmer who, after trying to manage over 2000 lines of procedural php code, now has discovered the value of OOP. I have read a few books to get me up to speed on the beginning theory, but would like some advice on practical application. So,for example, let's say there are two types of content objects - an ad and a calendar event. what my application does is scan different websites (a predefined list), and, when it finds an ad or an event, it extracts the data and saves it to a database. All of my objects will share a $title and $description. However, the Ad object will have a $price and the Event object will have $startDate. Should I have two separate classes, one for each object? Should I have a 'superclass' with the $title and $description with two other Ad and Event classes with their own properties? The latter is at least the direction I am on now. My second question about this design is how to handle the logic that extracts the data for $title, $description, $price, and $date. For each website in my predefined list, there is a specific regex that returns the desired value for each property. Currently, I have an extremely large switch statement in my constructor which determines what website I am own, sets the regex variables accordingly, and continues on. Not only that, but now I have to repeat the logic to determine what site I am on in the constructor of each class. This doesn't feel right. Should I create another class Algorithms and store the logic there for each site? Should the functions of to handle that logic be in this class? or specific to the classes whos properties they set? I want to take into account in my design two things: 1) I will add different content objects in the future that share $title and $description, but will have their own properties, so, I want to be able to easily grow these as needed. 2) I will add more websites constantly (each with their own algorithms for data extraction) so I would like to plan efficienty managing and working with these now. I thought about extending the Ad or Event class with 'websiteX' class and store its functions there. But, this didn't feel right either as now I have to manage 100s of little website specific class files. Note, I didn't know if this was the correct site or stackoverflow was the better choice. If so, let me know and I'll post there.

    Read the article

  • Showrooming: What's the big deal?

    - by David Dorf
    There's been lots of chatter recently on how retailers will combat showrooming this holiday season.  Best Buy and Target, for example, plan to price-match certain online sites.  But from my perspective, the whole showrooming concept is overblown.  Yes, mobile phones make is easier to comparison-shop, but consumers have been doing that all along.  Retailers have to work hard to merchandise their stores with the right products at the right price with the right promotions.  Its Retail 101. Yeah ok, many websites don't have to charge tax so they have an advantage, but they also have to cover shipping costs. Brick-and-mortar stores have the opportunity to provide expertise, fit, and instant gratification all of which are pretty big advantages. I see lots of studies that claim a large percentage of shoppers are showrooming.  Now I don't do much shopping, but when I do I rarely see anyone scanning UPC codes in the aisles.  If you dig into those studies, the question is usually something like, "have you used your mobile phone to price compare while shopping in the last year."  Well yeah, I did it once -- out of the 20 shopping trips.  And by the way, the in-store price was close enough to just buy the item.  Based on casual observation and informal surveys of friends, showrooming is not the modus-operandi for today's busy shoppers. I never see people showrooming in grocery stores, and most people don't bother for fashion.  For big purchases like appliances and furniture, I bet most people do their research online before entering the store.  The cases where I've done it was to see if a promotion was in fact a good deal.  Or even to make sure the in-store price is the same as the online price for the same brand. So, if you think you're a victim of showrooming, I suggest you look at the bigger picture.  Are you providing an engaging store experience?  Are you allowing customers to shop the way they want to shop, using various touchpoints?  Are you monitoring the competition to ensure prices are competitive?  Are your promotions attracting the right customers? Hubert Jolly, CEO of Best Buy, recently commented that showrooming might just get more people into his stores. "Once customers are in our stores, they're ours to lose."

    Read the article

  • How to perform Cross Join with Linq

    - by berthin
    Cross join consists to perform a Cartesian product of two sets or sequences. The following example shows a simple Cartesian product of the sets A and B: A (a1, a2) B (b1, b2) => C (a1 b1,            a1 b2,            a2 b1,            a2, b2 ) is the Cartesian product's result. Linq to Sql allows using Cross join operations. Cross join is not equijoin, means that no predicate expression of equality in the Join clause of the query. To define a cross join query, you can use multiple from clauses. Note that there's no explicit operator for the cross join. In the following example, the query must join a sequence of Product with a sequence of Pricing Rules: 1: //Fill the data source 2: var products = new List<Product> 3: { 4: new Product{ProductID="P01",ProductName="Amaryl"}, 5: new Product {ProductID="P02", ProductName="acetaminophen"} 6: }; 7:  8: var pricingRules = new List<PricingRule> 9: { 10: new PricingRule {RuleID="R_1", RuleType="Free goods"}, 11: new PricingRule {RuleID="R_2", RuleType="Discount"}, 12: new PricingRule {RuleID="R_3", RuleType="Discount"} 13: }; 14: 15: //cross join query 16: var crossJoin = from p in products 17: from r in pricingRules 18: select new { ProductID = p.ProductID, RuleID = r.RuleID };   Below the definition of the two entities using in the above example.   1: public class Product 2: { 3: public string ProductID { get; set; } 4: public string ProductName { get; set; } 5: } 1: public class PricingRule 2: { 3: public string RuleID { get; set; } 4: public string RuleType { get; set; } 5: }   Doing this: 1: foreach (var result in crossJoin) 2: { 3: Console.WriteLine("({0} , {1})", result.ProductID, result.RuleID); 4: }   The output should be similar on this:   ( P01   -    R_1 )   ( P01   -    R_2 )   ( P01   -    R_3 )   ( P02   -    R_1 )   ( P02   -    R_2 )   ( P02   -    R_3) Conclusion Cross join operation is useful when performing a Cartesian product of two sequences object. However, it can produce very large result sets that may caused a problem of performance. So use with precautions :)

    Read the article

  • Assessing Relative Maintainability

    - by João Bragança
    We (a contractor, actually) are implementing an off the shelf system to replace a legacy homegrown system for the core domain of the company (designing widgets). Unfortunately both systems will have to run concurrently for some time, as the product just isn't ready yet. Also, the decision was made to only migrate some of the widgets from the legacy system, based on date of last sale activity. Later on a new requirement came down: certain people in the company, most of them outside of the widget development context, want to search all widgets. The search results screen has 3 pieces of data: a GUID, a human readable id that is searchable, and a brief description (may need to be searchable in the future). In the widget details, there will be multiple screens. These screens align very well along SOA / bounded context lines - a screen for marketing data, a screen for sales history, etc. UML ahead! I am probably using the wrong kind of arrows here so please forgive me. The current solution - which is not in production yet - is something like the following: Both systems will be queried and the controller will merge the results. The new system has its own proprietary query language (we've alleviated this a bit with a LINQ provider). It also puts a lot of data on the wire. 15 search results typically run about 60k of unintelligible SOAP-wrapped xml. So I would prefer to avoid querying this system directly. These two systems publish events to help us integrate with other systems, mainly an ERP system. One of these events contains all the data necessary for the search screen. I proposed the following alternative: However I am being told that 'adding another database' will create more maintenance down the road. However, I believe this to be false, as I had to add a relatively simple feature that took several hours longer than anticipated because of this merging code. I want to get a feel for which system is more maintainable in the long run. I personally have not had the burden of maintaining any large system. I want something more than my gut. Specifically I'd like to know if having more, specialized physical databases is more or less maintainable than having less larger physical databases.

    Read the article

  • Write and fprintf for file I/O

    - by Darryl Gove
    fprintf() does buffered I/O, where as write() does unbuffered I/O. So once the write() completes, the data is in the file, whereas, for fprintf() it may take a while for the file to get updated to reflect the output. This results in a significant performance difference - the write works at disk speed. The following is a program to test this: #include <fcntl.h #include <unistd.h #include <stdio.h #include <stdlib.h #include <errno.h #include <stdio.h #include <sys/time.h #include <sys/types.h #include <sys/stat.h static double s_time; void starttime() { s_time=1.0*gethrtime(); } void endtime(long its) { double e_time=1.0*gethrtime(); printf("Time per iteration %5.2f MB/s\n", (1.0*its)/(e_time-s_time*1.0)*1000); s_time=1.0*gethrtime(); } #define SIZE 10*1024*1024 void test_write() { starttime(); int file = open("./test.dat",O_WRONLY|O_CREAT,S_IWGRP|S_IWOTH|S_IWUSR); for (int i=0; i<SIZE; i++) { write(file,"a",1); } close(file); endtime(SIZE); } void test_fprintf() { starttime(); FILE* file = fopen("./test.dat","w"); for (int i=0; i<SIZE; i++) { fprintf(file,"a"); } fclose(file); endtime(SIZE); } void test_flush() { starttime(); FILE* file = fopen("./test.dat","w"); for (int i=0; i<SIZE; i++) { fprintf(file,"a"); fflush(file); } fclose(file); endtime(SIZE); } int main() { test_write(); test_fprintf(); test_flush(); } Compiling and running I get 0.2MB/s for write() and 6MB/s for fprintf(). A large difference. There's three tests in this example, the third test uses fprintf() and fflush(). This is equivalent to write() both in performance and in functionality. Which leads to the suggestion that fprintf() (and other buffering I/O functions) are the fastest way of writing to files, and that fflush() should be used to enforce synchronisation of the file contents.

    Read the article

  • How are Reads Distributed in a Workload

    - by Bill Graziano
    People have uploaded nearly one millions rows of trace data to TraceTune.  That’s enough data to start to look at the results in aggregate.  The first thing I want to look at is logical reads.  This is the easiest metric to identify and fix. When you upload a trace, I rank each statement based on the total number of logical reads.  I also calculate each statement’s percentage of the total logical reads.  I do the same thing for CPU, duration and logical writes.  When you view a statement you can see all the details like this: This single statement consumed 61.4% of the total logical reads on the system while we were tracing it.  I also wanted to see the distribution of reads across statements.  That graph looks like this: On average, the highest ranked statement consumed just under 50% of the reads on the system.  When I tune a system, I’m usually starting in one of two modes: this “piece” is slow or the whole system is slow.  If a given piece (screen, report, query, etc.) is slow you can usually find the specific statements behind it and tune it.  You can make that individual piece faster but you may not affect the whole system. When you’re trying to speed up an entire server you need to identity those queries that are using the most disk resources in aggregate.  Fixing those will make them faster and it will leave more disk throughput for the rest of the queries. Here are some of the things I’ve learned querying this data: The highest ranked query averages just under 50% of the total reads on the system. The top 3 ranked queries average 73% of the total reads on the system. The top 10 ranked queries average 91% of the total reads on the system. Remember these are averages across all the traces that have been uploaded.  And I’m guessing that people mainly upload traces where there are performance problems so your mileage may vary. I also learned that slow queries aren’t the problem.  Before I wrote ClearTrace I used to identify queries by filtering on high logical reads using Profiler.  That picked out individual queries but those rarely ran often enough to put a large load on the system. If you look at the execution count by rank you’d see that the highest ranked queries also have the highest execution counts.  The graph would look very similar to the one above but flatter.  These queries don’t look that bad individually but run so often that they hog the disk capacity. The take away from all this is that you really should be tuning the top 10 queries if you want to make your system faster.  Tuning individually slow queries will help those specific queries but won’t have much impact on the system as a whole.

    Read the article

  • Oracle R Distribution 3.1.1 Released

    - by Sherry LaMonica-Oracle
    Oracle R Distribution version 3.1.1 has been released to Oracle's public yum today. R-3.1.1 (code name "Sock it to Me") is an update to R-3.1.0 that consists mainly of bug fixes. It also includes enhancements related to accessing package help files, improved accuracy when importing data with large integers, and better integration with RStudio graphics. The full list of new features and bug fixes is listed in the NEWS file.To install Oracle R Distribution using yum, follow the instructions in the Oracle R Enterprise Installation and Administration Guide.Installing using yum will resolve any operating system dependencies automatically. As such, we recommend using yum to install Oracle R Distribution. However, if yum is not available, you can install Oracle R Distribution RPMs directly using RPM commands.For Oracle Linux 5, the Oracle R Distribution RPMs are available in the Enterprise Linux Add-Ons repository:  R-3.1.1-1.el5.x86_64.rpm   R-core-3.1.1-1.el5.x86_64.rpm  R-devel-3.1.1-1.el5.x86_64.rpm  libRmath-3.1.1-1.el5.x86_64.rpm  libRmath-devel-3.1.1-1.el5.x86_64.rpm  libRmath-static-3.1.1-1.el5.x86_64.rpm For Oracle Linux 6, the Oracle R Distribution RPMs are available in the Oracle Linux Add-Ons repository:  R-3.1.1-1.el6.x86_64.rpm  R-core-3.1.1-1.el6.x86_64.rpm  R-devel-3.1.1-1.el6.x86_64.rpm  libRmath-3.1.1-1.el6.x86_64.rpm  libRmath-devel-3.1.1-1.el6.x86_64.rpm  libRmath-static-3.1.1-1.el6.x86_64.rpmFor example, this command installs the R 3.1.1 RPM on Oracle Linux x86-64 version 6:  rpm -i R-3.1.1-1.el6.x86_64.rpm To complete the Oracle R Distribution 3.1.1 installation, repeat this command for each of the 6 RPMs, resolving dependencies as required. Oracle R Distribution 3.1.1 is not yet officially certified with Oracle R Enterprise. Refer to Table 1-2 in the Oracle R Enterprise Installation Guide for supported configurations of Oracle R Enterprise components, or check this blog for updates. The Oracle R Distribution 3.1.1 binaries for Windows, AIX, Solaris SPARC and Solaris x86 will be available on OSS, Oracle's Open Source Software portal, in the coming weeks.

    Read the article

  • So, I though I wanted to learn frontend/web development and break out of my comfort zone...

    - by ripper234
    I've been a backend developer for a long time, and I really swim in that field. C++/C#/Java, databases, NoSql, caching - I feel very much at ease around these platforms/concepts. In the past few years, I started to taste end-to-end web programming, and recently I decided to take a job offer in a front end team developing a large, complex product. I wanted to break out of my comfort zone and become more of an "all around developer". Problem is, I'm getting more and more convinced I don't like it. Things I like about backend programming, and missing in frontend stuff: More interesting problems - When I compare designing a server that handle massive data, to adding another form to a page or changing the validation logic, I find the former a lot more interesting. Refactoring refactoring refactoring - I am addicted to Visual Studio with Resharper, or IntelliJ. I feel very comfortable writing code as it goes without investing too much thought, because I know that with a few clicks I can refactor it into beautiful code. To my knowledge, this doesn't exist at all in javascript. Intellisense and navigation - I hate looking at a bunch of JS code without instantly being able to know what it does. In VS/IntelliJ I can summon the documentation, navigate to the code, climb up inheritance hiererchies ... life is sweet. Auto-completion - Just hit Ctrl-Space on an object to see what you can do with it. Easier to test - With almost any backend feature, I can use TDD to capture the requirements, see a bunch of failing tests, then implement, knowing that if the tests pass I did my job well. With frontend, while tests can help a bit, I find that most of the testing is still manual - fire up that browser and verify the site didn't break. I miss that feeling of "A green CI means everything is well with the world." Now, I've only seriously practiced frontend development for about two months now, so this might seem premature ... but I'm getting a nagging feeling that I should abandon this quest and return to my comfort zone, because, well, it's so comfy and fun. Another point worth mentioning in this context is that while I am learning some frontend tools, a lot of what I'm learning is our company's specific infrastructure, which I'm not sure will be very useful later on in my career. Any suggestions or tips? Do you think I should give frontend programming "a proper chance" of at least six to twelve months before calling it quits? Could all my pains be growing pains, and will they magically disappear as I get more experienced? Or is gaining this perspective is valuable enough, even if plan to do more "backend stuff" later on, that it's worth grinding my teeth and continuing with my learning?

    Read the article

  • Setting up Ubuntu on my mother's computer

    - by idealmachine
    Intended use My mother had an old Compaq desktop computer running Windows 98, which she used for occasional Web browsing and playing cards. The name of her card game is Hoyle Card Games 3. Although I had to repair it several times over the last 10 years, it worked fine until it finally died at the end of last year. Hardware specifications A relative brought up a newer computer soon afterward: Operating system: Windows XP Asus K8N motherboard (with broken on-board sound; getting a sound card) Athlon 64? processor (don't remember the clock speed) 512 MB RAM Hope the graphics card works... Replacement sound card will be one of: Ensoniq ES1370 AudioPCI Diamond Monster Sound MX300 (Aureal chipset) Sound Blaster Audigy 2 SE Peripherals HP Scanjet 3400c scanner (USB connected) HP LaserJet multi-function printer (parallel port connected, and printing works with a PCL driver) Same serial mouse as old computer Question I had set up an SSH/VNC connection to allow for remotely working out problems. Or so I thought. A month later, the computer would not boot, rendering the SSH connection useless and an OS reinstall necessary. Unfortunately, I have neither the original Windows disc nor the product key. Unless I were to pay $200 for a full Windows 7 Home Premium license for my computer, I would not be able to re-install Windows XP on hers. I consider myself an advanced Linux user, having used Debian for years. So here are my questions. I have only one day to decide whether to use Ubuntu or buy Windows: A quick search leads me to believe all the hardware listed above is supposed to work with Linux, but am I mistaken? Would Ubuntu/Xubuntu suffice (specify which one if it matters), or would I be better off paying the $200 necessary for Windows XP? Is the card game likely to run on Wine? I believe the minimum system requirement is Windows 95. Failing Wine compatibility, will VirtualBox run fast enough on such a computer (Windows 98 as the guest OS)? Are there any free card games just as good? She plays mainly Bridge, Poker, and Solitaire. Is there any "Large Fonts" option for those with poor vision? The lack of it would be a big disadvantage. BONUS: Although I would probably replace the old mouse upon a move to Ubuntu, is it even possible to get a serial mouse working?

    Read the article

  • PASS Summit 2010 BI Workshop Feedbacks

    - by Davide Mauri
    As many other speakers already did, I’d like to share with the SQL Community the feedback of my PASS Summit 2010 Workshop. For those who were not there, my workshop was the “BI From A-Z” and the main objective of that workshop was to introduce people in the BI world not only from a technical point of view but insist a lot on the methodological and “engineered” approach. The will to put more engineering in the IT (and specially in the BI field) is something that has been growing stronger and stronger in me every day for of this last 5 years since is simply envy the fact that Airbus, Fincatieri, BMW (just to name a few) can create very complex machine “just” using putting people together and giving them some rules to follow (Of course this is an oversimplification but I think you get what I mean). The key point of engineering is that, after having defined the project blueprint, you have the possibility to give to a huge number of people, the rules to follow, the correct tools in order to implement the rules easily and semi-automatically and a way to measure the quality of the results. Could this be done in IT? Very big question, so my scope is now limited to BI. So that’s the main point of my workshop: and entry-level approach to BI (level was 200) in order to allow attendees to know the basics, to understand what tools they should use for which purpose and, above all, a set of rules and tools in order to make a BI solution scalable in terms of people working on it, while still maintaining a very good quality. All done not focusing only on the practice but explaining the theory behind to see how it can help *a lot* to build a correct solution despite the technology used to implement it. The idea is to reach a point where more then 70% of the work done to create a BI solution can be reused even if technologies changes. This is a very demanding challenge nowadays with the coming of Denali and its column-aligned storage and the shiny-new DAX language. As you may understand I was looking forward to get the feedback since you may have noticed that there’s a lot of “architectural” stuff in IT but really nothing on “engineering”. So how the session could be perceived by the attendees was really unknown to me. The feedback could also give a good indication if the need of more “engineering” is something I feel only by myself or if is something more broad. I’m very happy to be able to say that the overall score of 4.75 put my workshop in the TOP 20 session (on near 200 sessions)! Here’s the detailed evaluations: How would you rate the usefulness of the information presented in your day-to-day environment? 4.75 Answer:    # of Responses 3    1         4    12        5    42               How would you rate the Speaker's presentation skills? 4.80 Answer:    # of Responses 3 : 1         4 : 9         5 : 45               How would you rate the Speaker's knowledge of the subject? 4.95 Answer:    # of Responses 4 :  3         5 : 52               How would you rate the accuracy of the session title, description and experience level to the actual session? 4.75 Answer:    # of Responses 3 : 2         4 : 10         5 : 43               How would you rate the amount of time allocated to cover the topic/session? 4.44 Answer:    # of Responses 3 : 7         4 : 17        5 : 31               How would you rate the quality of the presentation materials? 4.62 Answer:    # of Responses 4 : 21        5 : 34 The comments where all very positive. Many of them asked for more time on the subject (or to shorten the very last topics). I’ll make treasure of these comments and will review the content accordingly. We’ll organize a two-day classes on this topic, where also more examples will be shown and some arguments will be explained more deeply. I’d just like to answer a comment that asks how much of what I shown is “universally applicable”. I can tell you that all of our BI project follow these rules and they’ve been applied to different markets (Insurance, Fashion, GDO) with different people and different teams and they allowed us to be “Adaptive” against the customer. The more the rules are well defined and the more there are tools that supports their implementations, the easier is to add new people to the project and to add or change solution features. Think of a car. How come that almost any mechanic can help you to fix a problem? Because they know what to expect. Because there a rules that allow them to identify the problem without having to discover each time how the car has been implemented build. And this is of course also true for car upgrades/improvements. Last but not least: thanks a lot to everyone for coming!

    Read the article

  • ClearTrace Performance on 170GB of Trace Files

    - by Bill Graziano
    I’ve always worked to make ClearTrace perform well.  That’s probably because I spend so much time watching it work.  I’m often going through two or three gigabytes of trace files but I rarely get the chance to run it on a really large set of files. One of my clients wanted to run a full trace for a week and then analyze the results.  At the end of that week we had 847 200MB trace files for a total of nearly 170GB. I regularly use 200MB trace files when I monitor production systems.  I usually get around 300,000 statements in a file that size if it’s mostly stored procedures.  So those 847 trace files contained roughly 250 million statements.  (That’s 730 bytes per statement if you’re keeping track.  Newer trace files have some compression in them but I’m not exactly sure what they’re doing.)  On a system running 1,000 statements per second I get a new file every five minutes or so. It took 27 hours to process these files on an older development box.  That works out to 1.77MB/second.  That means ClearTrace processed about 2,654 statements per second. You can query the data while you’re loading it but I’ve found it works better to use a second instance of ClearTrace to do this.  I’m not sure why yet but I think there’s still some dependency between the two processes. ClearTrace is almost always CPU bound.  It’s really just a huge, ugly collection of regular expressions.  It only writes a summary to its database at the end of each trace file so that usually isn’t a bottleneck.  At the end of this process, the executable was using roughly 435MB of RAM.  Certainly more than when it started but I think that’s acceptable. The database where all this is stored started out at 100MB.  After processing 170GB of trace files the database had grown to 203MB.  The space savings are due to the “datawarehouse-ish” design and only storing a summary of each trace file. You can download ClearTrace for SQL Server 2008 or test out the beta version for SQL Server 2012.  Happy Tuning!

    Read the article

  • Switch from back-end to front-end programming: I'm out of my comfort zone, should I switch back?

    - by ripper234
    I've been a backend developer for a long time, and I really swim in that field. C++/C#/Java, databases, NoSql, caching - I feel very much at ease around these platforms/concepts. In the past few years, I started to taste end-to-end web programming, and recently I decided to take a job offer in a front end team developing a large, complex product. I wanted to break out of my comfort zone and become more of an "all around developer". Problem is, I'm getting more and more convinced I don't like it. Things I like about backend programming, and missing in frontend stuff: More interesting problems - When I compare designing a server that handle massive data, to adding another form to a page or changing the validation logic, I find the former a lot more interesting. Refactoring refactoring refactoring - I am addicted to Visual Studio with Resharper, or IntelliJ. I feel very comfortable writing code as it goes without investing too much thought, because I know that with a few clicks I can refactor it into beautiful code. To my knowledge, this doesn't exist at all in javascript. Intellisense and navigation - I hate looking at a bunch of JS code without instantly being able to know what it does. In VS/IntelliJ I can summon the documentation, navigate to the code, climb up inheritance hiererchies ... life is sweet. Auto-completion - Just hit Ctrl-Space on an object to see what you can do with it. Easier to test - With almost any backend feature, I can use TDD to capture the requirements, see a bunch of failing tests, then implement, knowing that if the tests pass I did my job well. With frontend, while tests can help a bit, I find that most of the testing is still manual - fire up that browser and verify the site didn't break. I miss that feeling of "A green CI means everything is well with the world." Now, I've only seriously practiced frontend development for about two months now, so this might seem premature ... but I'm getting a nagging feeling that I should abandon this quest and return to my comfort zone, because, well, it's so comfy and fun. Another point worth mentioning in this context is that while I am learning some frontend tools, a lot of what I'm learning is our company's specific infrastructure, which I'm not sure will be very useful later on in my career. Any suggestions or tips? Do you think I should give frontend programming "a proper chance" of at least six to twelve months before calling it quits? Could all my pains be growing pains, and will they magically disappear as I get more experienced? Or is gaining this perspective is valuable enough, even if plan to do more "backend stuff" later on, that it's worth grinding my teeth and continuing with my learning?

    Read the article

  • Storing a looong lookup table

    - by inquisitive
    Background The product i am working on has a very long lookup-table. the table contains static data and cannot be auto generated. there are about 500 rows and 10 columns. columns have mostly integers and strings. to complicate the matters, there are actually two such tables. every row in table-1 maps to zero-or-more rows in table-2. we use an SQLite database with two tables. the product installer places the SQLite file in the installation directory. the application is written in dot-net and we use ADO to load the data once on startup. now, the lookup table grows. in each release a month, we add about 10 new entries existing entries are adjusted. every release we fine tune existing entries. The problem a team of (10) developers work on the lookup table. Code goes in the SVN, but the little devil the SQLite does not. this prevents multiple developers to work on it. we do take regular backups of the file, but proper versioning is not possible. we never know who did the breaking change. the worse thing is we dont know if there is any change at all. diff'ing databases is tedious if not impossible. the tables are expected to grow quite large in years to come and we would need developers to work in parallel on it. the data is business critical. we need to be able to audit changes made to it. Question What would be a solution for the problems outlines above? one idea was to transform the whole thing to XML and treat it like just another source file. that way SVN can do the versioning and we can work in parallel. but the data shows relational behavior. with XML we loose the unique and foreign-key constraints. also we cant query it with sql like ease. any help here will be appreciated.

    Read the article

  • Keeping your options open in a cloud solution

    - by BuckWoody
    In on-premises solutions we have the full range of options open for a given computing solution – but we don’t always take advantage of them, for multiple reasons. Data goes in a Relational Database Management System, files go on a share, and e-mail goes to the Exchange server. Over time, vendors (including ourselves) add in functionality to one product that allow non-standard use of the platform. For example, SQL Server (and Oracle, and others) allow large binary storage in or through the system – something not originally intended for an RDBMS to handle. There are certainly times when this makes sense, of course, but often these platform hammers turn every problem into a nail. It can make us “lazy” in our design – we sometimes don’t take the time to learn another architecture because the one we’ve spent so much time with can handle what we want to do. But there’s a distinct danger here. In nature, when a population shares too many of the same traits, it can cause a complete collapse if a situation exploits a weakness shared by that population. The same is true with not using the righttool for the job in a computing environment. Your company or organization depends on your knowledge as a professional to select the best mix of supportable, flexible, cost-effective technologies to solve their problems, whether you’re in an architect role or not.  So take some time today to learn something new. The way I do this is to select a given problem, and try to solve it with a technology I’m not familiar with. For instance – create a Purchase Order system in Excel, then in Hadoop or MongoDB, or even in flat-files using PowerShell as an interface. No, I’m not suggesting any of these architectures are the proper way to solve the PO problem, but taking something concrete that you know well and applying that meta-knowledge to another platform will assist you in exercising the “little grey cells” and help you and your organization understand what is open to you. And of course you can do all of this on-premises – but my recommendation is to check out a cloud platform (my suggestion would of course be Windows Azure :) ) and try it there. Most providers (including Microsoft) provide free time to do that.

    Read the article

  • What does path finding in internet routing do and how is it different from A*?

    - by alan2here
    Note: If you don't understand this question then feel free to ask clarification in the comments instead of voting down, it might be that this question needs some more work at the moment. I've been directed here from the Stack Excange chat room Root Access because my question didn't fit on Super User. In many aspects path finding algorithms like A star are very similar to internet routing. For example: A node in an A* path finding system can search for a path though edges between other nodes. A router that's part of the internet can search for a route though cables between other routers. In the case of A*, open and closed lists are kept by the system as a whole, sepratly from any individual node as well as each node being able to temporarily store a state involving several numbers. Routers on the internet seem to have remarkable properties, as I understand it: They are very performant. New nodes can be added at any time that use a free address from a finite (not tree like) address space. It's real routing, like A*, there's never any doubling back for example. Similar IP addresses don't have to be geographically nearby. The network reacts quickly to changes to the networks shape, for example if a line is down. Routers share information and it takes time for new IP's to be registered everywhere, but presumably every router doesn't have to store a list of all the addresses each of it's directions leads most directly to. I'm looking for a basic, general, high level description of the algorithms workings from the point of view of an individual router. Does anyone have one? I presume public internet routers don't use A* as the overheads would be to large, and scale to poorly. I also presume there is a single method worldwide because it seems as if must involve a lot of transferring data to update and communicate a reasonable amount of state between neighboring routers. For example, perhaps the amount of data that needs to be stored in each router scales logarithmically with the number of routers that exist worldwide, the detail and reliability of the routing is reduced over increasing distances, there is increasing backtracking involved in parts of the network that are less geographically uniform or maybe each router really does perform an A* style search, temporarily maintaining open and closed lists when a packet arrives.

    Read the article

  • RTS Game Style Application [closed]

    - by Daniel Wynand van Wyk
    My question may seem somewhat odd, but I hope that my specifications will clarify EXACTLY what it is that I am after. I need some help choosing the right tooling for a particular endeavour. My background is in desktop application development and large back-end systems. I have worked primarily on the Microsoft stack using C# and the .Net framework. My goal is to develop a 2D, RTS style, interactive office simulation. The simulation will model various office spaces, office equipment, employees and their interactions with one another. The idea is to abstract the concept of an office completely. Under the hood the application will do many things that are nothing like a game. This includes P2P networking, VPN tunnelling, streaming video, instant messaging, document collaboration, remote screen sharing, file-sharing, virus scanning, VOIP, document scanning, faxing, emailing, distributed computing, content management and much more! A somewhat similar thing has been attempted by IBM, where they created a virtual office in second life. If their attempt was a game, the game-play would be notably horrible, to say the least! The users/players will drive and control my application through the various objects modelled in the simulation. A single application capable of performing all of these various tasks would be a nightmare to navigate for even the most expert user. Using the concept of a game, I can easily separate functionality by assigning them to objects that relate 1-1 with their real world counter-parts. This can greatly simplify computing for novice users, with many added benefits in terms of visibility, transparency of process and centralized configuration. My hope is to make complex computing tasks accessible to all kinds of users and to greatly reduce the cognitive load associated with using the many different utilities and applications inside office settings. The complexity is therefore limited to the complexity of the space in which you find yourself. I want the application to target as many platforms as possible and run on computers that have no accelerated graphics capabilities. The simulation won't contain any of the fancy eye-candy you find in modern games, to the contrary, my "game" will purposefully be clean and simple. The closest thing I could imagine would be an old game like "Theme Hospital" or the first instalment of "The Sims". All the content will be pre-created and not user-generated like Second Life. New functionality will be added via a plugin system. Given my background and nature of my "game", I would like to spend most of my time writing code that does not have to do with the simulated office, as the "game" is really just a glorified application menu. I have done much reading about existing engines, frameworks and tools. I need the help of an experienced game developer who has tried and tested various products over the years who can guide me in the right direction given my very particular needs. I would appreciate any help I can get!

    Read the article

  • Quickly Copy Movie Files to Individually Named Folders

    - by DigitalGeekery
    Some HTPC media manager applications require movie files to be in stored in separate folders to properly store information such as cover art images and other metadata. Here we look at copying movie files to individual folders. If you already have a large movie collection stored in a single folder, we’ll show you how to quickly move those files into their own individually named folders. File2Folder FIle2folder is a handy portable app that automatically creates and moves movie files into a folder of the same filename. There is no installation needed. Simply download and run the .exe file (link below). Enter the current movie directory, or browse for the folder. File2folder now supports both local and network shares. When you are ready to create the folders and move the files, click Move! You’ll see the move progress displayed in the window. When the process is finished, you’ll have all your movie file in individual folders.   Change your mind? Just click the Undo! button…   …and the move and folder creation process will be undone. If you would like to have the folder monitored for new files, click the Start button. File2folder will process any new files it discovers every 180 seconds. To turn it off, click Stop. This simple little program is a huge timesaver for those looking to organize movie collections for their HTPC. We should also note that this will work with any files, not just videos. Download file2folder Similar Articles Productive Geek Tips Hack: Turn Off Debug Mode in VMWare Workstation 6 BetaAdd Images and Metadata to Windows 7 Media Center Movie LibraryAdd Folders to the Movie Library in Windows 7 Media CenterAutomatically Mount and View ISO files in Windows 7 Media CenterMove the Public Folder in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Identify Fonts using WhatFontis.com Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician

    Read the article

< Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >