Search Results

Search found 13692 results on 548 pages for 'bad practices'.

Page 340/548 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >

• When is it time to buy a new hard drive, and what considerations go into buying a new hard drive?

  - by user1125620

  I've had my current hard drive for about 4-5 years now, and I've never had a problem with it before, but now it's making whirring noises. It's done this before and, last time, the noise did go away the next day, but I have accumulated quite a bit of information that I wouldn't want to lose on the drive. HD Tune Pro and Berlac Advisor both said the drive was healthy, and I wouldn't want to get a new one unless it was absolutely necessary or was going to show drastic performance improvements. My only knock against the drive would be that Visual Studio takes longer to load than I'd like it to. HD Tune Pro says the average read speed is 54.3MB/s. I'm not sure if that's good or bad, but it seems about average compared to similar drives on http://www.hdtune.com/testresults.html. Model #: WDC WD5000AAJS-22YFA0 So, should hard drives be replaced after a certain amount of time? Has mine reached that point? Would a new hard drive be any faster?

  Read the article

• Is there a limit on the number of USB external drives?

  - by Beska

  I've got three external HDDs, all My Books, 500 GB, 750 GB, and 1 TB. If I hook one or two of them up to a computer, everything seems fine. If I hook all three of them to a computer (I've tried this on two different computers, one running Windows XP, one running Windows Vista), the bootup time goes up by more than an order of magnitude. It can suddenly take about 10-20 minutes to boot the machine, whereas before it might take a minute. All three drives work fine on their own. I'm not using any kind of hub; all three are plugged directly into the machine. Is this associated with some kind of inherent limit in USB? Is this bad hardware design in the CPU box? Is this a My Book problem?

  Read the article

• What are possible causes of keyboard lag on my desktop machine?

  - by Jer

  I am running Windows 7 and began experiencing keyboard lag in most applications, and it seems to be getting worse. Certain websites are the worst - on some, I can type a sentence, take my hands off the keyboard, and watch the characters continue to appear on the screen for several seconds. Others are not as bad, but still noticeable and annoying. I just started noticing it in non-browser applications (e.g. Outlook) as well. I've disabled all extensions in Firefox, rebooted my machine, and that did nothing. There is nothing using much memory or cpu cycles, even when the lag is occurring. This is a machine at work with very strict controls over what can be installed, so the chances of any kind of malware are very slim. I don't believe anything as been installed since before the problem started. What could be causing this, and/or what can I do to debug?

  Read the article

• windows 7, slow keyboard

  - by dwight kelly

  I am using Windows 7. the keyboard requires appoximately 1 second of hold down before it sends the letter. the pc wil click once at the 1/2 second then at 1 second the letter will show up. I thought the keyboard was bad and I purchased a new one (usb) and the same thing happened. I pulled out an old ps/2 keyboard, and the same thing. I booted the pc up and went into bios. the keyboard works fine there. I tried unninstalling and reinstalling the drivers, no change please advise

  Read the article

• How to configure an ASUS motherboard.

  - by Absolute0

  I have an ASUS P7P55-M motherboard running with an Intel Core i5-750 processor and 4 GB RAM with 1600 MT/s speed. For some reason the default settings of the motherboard make all the components run at half their optimums. I have switched to the "D.O.C.P." profile and supposedly everything is as it's supposed to be (verified with CPU-Z). There is also an "X.M.P." profile and a manual one. Are either of the DOCP or XMP safe to go with? I wouldn't use the manual mode as I would likely mess something up real bad. XMP seems to be more memory oriented.

  Read the article

• Custom PC won't boot Windows 7 dvd but does with windows vista

  - by M_rk

  I ordered a custom build PC. (It was assembled by the store). This is the setup Motherboard: Asrock A75 PRO4-M DVD drive: LG GH24NS90 SSD: Samsung 830 series 128GB DDR3 SDRAM: 2× Corsair XMS3 CMX4GX3M1A1600C9 (2× 4GB) APU (CPU+GPU): AMD A8-3850 Boxed I got a installation DVD for Windows 7 Professional x64 English (including SP1), but it doesn't work. I got a new one from the store and it doesn't work either. However they work on a other PC. So the DVDs aren't bad. I tried an old installation DVD for Windows Vista. Both 32 bit and 64 bit work. So the boot order and such are right and working on the new PC. Is there something I'm missing here? Any ideas on how to make it work?

  Read the article

• Linux web server shared hosting file errors

  - by dfilkovi

  I'm using a shared hosting to host my website and have some problems with files from time to time. First, one of my file (php) was missing a part of code (nothing to do with hackers just a random piece of code was missing), then after some time a value inside a mysql table was also missing a part, then a whole table column disappeared, after that a whole file on my site disappeared and lastly again some code from a file disappeared, my hosting service says it has nothing to do with them, but this is stupid, how can this happen, no hacker attack could do such a thing, I believe it's some kind of a disk corruption or bad backup. Anyone have any ideas?

  Read the article

• My BrowserHelperObject is detected by avg as a malware, what is going wrong.

  - by BHOdevelopper

  Hi i'm building a BrowserHelperObject in c++ for Internet Explorer 8. It is a friendly add-on that gives you fonctionalities in a sidebar. The thing is that when you download the add-on executable from the web, AVG (AntiVirusGuard) detects the executable file as a malware. I did a lot of research and i can't find a way to not being seen as a bad malware. I know that BrowserHelperObject are often seen as malware, but mine is just a good and friendly add-on. Does anyone as info on how antivirus detection works and what can i do to prevent being seen as a malware. What has to be done to the BHO to pass avg detection ? Thank you.

  Read the article

• Iptables remote port forwarding and dynamic remote ip

  - by lbwtz2

  Hello, I want to forward a port from my remote vps to my domestic server and I am quite a newbie with iptables. The problem is that I am using a dynamic dns service to reach my home server from the internet so I don't have a fixed ip and iptables doesn't like urls. The rules I am willing to use are these: -t nat -A PREROUTING -p tcp -i eth0 -d xxx.xxx.xxx.xxx --dport 8888 -j DNAT --to myhome.tld:80 -A FORWARD -p tcp -i eth0 -d myhome.tld --dport 80 -j ACCEPT Of course I recevie a Error BAD IP ADDRESS because of myhome.tld. What can I do?

  Read the article

• Apple TV photo fail

  - by Tony

  I just bought the new (2nd gen) Apple TV. Everything works beautifully, except for Photos. I have 25,000 pictures on my computer, which creates 3 issues with Apple TV 1) It takes roughly an HOUR to load my photos, every time! (if I navigate anywhere else, its has to reload all over again next time) 2) It condenses all of my folders-sub-folders-sub-sub-folders into just the top folder. Having only 5 top folders with 5,000 pictures each is pretty much useless. 3) It has an artificial cap of 20,000 pictures, after which it won’t load more. The first two are the big ones, since they pretty much make the product unusable. I have called apple support (they just said “sorry…too bad”), and have checked all the online forums I can. Also it is definitely not a connection issue, as it streams HD Netflix movies with ease. Does anyone else here have this issue, and/or hopefully some solutions?

  Read the article

• What is the right way to use Internet Sharing in OS X?

  - by Bob King

  For a while now I've been using the Wireless in my Mac Mini as a seperate WiFi access point because my main router doesn't quite cover my whole house. There is a dedicated CAT 5E line down to the Mini, which has a static IP address. I've turned Internet Sharing on, using Airport/WiFi but it seems my options for security are limited. Can I do WPA2? Also, it seems like my iPhone only connects 25% of the time, and the rest of the time it claims I've given a bad password. I've tried "Forget this network" repeatedly.

  Read the article

• Ubuntu Server upgrade over SSH hang

  - by Chris

  I was upgrading an Ubuntu server (using the do-release-upgrade) command over SSH (I know it's a bad idea, but it was the only choice; I don't have physical access to the server). It seemed to go fine and was going thru the 'setting up package name' part when it froze on the line Installing new version of config file /etc/mysql/debian-start ... The SSH connection appears to be still active, as pressing the up arrow echoes back ^[[A, and so on. When I log in on another SSH connection I can log in fine, but the ** system needs restart ** message shows up. Is it safe to ^C the release-upgrade command, or try to reboot the server? Should I ^C the upgrade and try it again? Anything else I could try?

  Read the article

• Cant access EC2 hosted website

  - by Himanshu Page

  For some reason, I am unable to access our website www.doccaster.com (Bad request nginx). We are hosted on amazon EC2 with elastic ip associated to it. The weird part is a) I can access it through the public dns url http://ec2-184-73-195-180.compute-1.amazonaws.com b) My co founder who is located in another city can access it via www.doccaster.com. I observed that my instance was failing reachability check, so I launched a new one and assigned it the the elastic ip. I tried to ping the ip address 184.73.195.180 from my machine but no success. Any help will be really appreciated. More details I ran the following command on my server netstat -lntp | grep -E 'apache|httpd' and it displays :::80 for httpd . Is this accurate ? Should it be 0:0:0:80 ? or doesnt matter?

  Read the article

• Truecrypt system partion partially encryted but then drive corrupted and won't boot - decrypting so I can access files to backup?

  - by Dr.Seuss

  So I was attempting to encrypt my (Windows 7) system drive with Truecrypt and it stopped at around 15% and said that there was a segment error and that it could not proceed until it was fixed. So, I restarted the computer and ran HDD Regenerator which subsequently fixed the bad sectors on the drive, but now my system cannot boot. So, I run a number of recovery disks to no avail (Windows repair is unable to fix) and the drive won't mount on a linux version run from a CD because the drive is encrypted. So I tried mounting the drive using Truecrypt under the Linux distribution on the disk and selected "Mount partition using system encryption without pre-boot authentication" so I can decrypt, but I get an error message about it only being possible once the entire system is encrypted. How do I get out of this mess? I need to be able to back up the data that's on that partially encrypted drive so I can reinstall my operating system.

  Read the article

• Window 2003 Server - Logon Failure error message in Event Viewer

  - by user45192

  Hi guys, I received alot of event logged in the event viewer with this message. I notice is always the same user id which encounters this error. The user id is use by an application to access the database. However, this account does not exits on this server. How do I trace the services/program use by this user id which causes these error messages? Reason=Unknown user name or bad password&&User Name=&&Domain=&&Logon Type=3&&Logon Process=NtLmSsp&&Authentication Package=NTLM&&Workstation Name=&&Caller User Name=-&&Caller Domain=-&&Caller Logon ID=-&&Caller Process ID=-&&Transited Services=-&&Source Network Address=-&&Source Port=-&&User=SYSTEM&&ComputerName=

  Read the article

• How to fix rogue Firefox window?

  - by Colonel Panic

  I have a rogue Firefox Window which has no tab bar, and no orange Firefox menu button. It has no back button either, nor no home or bookmarks buttons. My other Firefox windows are fine. How can I right the bad window? Sometimes in Google Chrome I encounter similar rogue windows. I tame them by right-clicking and choosing 'show as tab'. Edit: I want to keep the window open, I just want to reintegrate it into society.

  Read the article

• How to get Apache web server to run on other computers?

  - by Eric

  I have been using Apache Web Server for a while now and one thing I have noticed is that outside of my computer I can not access it. I use my Apache server for PHP development on my computer, but I would like to access stuff I have made outside of my computer. I am on a linksys router network. I usually run it of http://localhost/ or http://127.0.0.1/. I IPCONFIGED my computer and got 192.168.1.105 so I went there with my browser and got the page just fine. I tried doing this on another computer on the same network but it didn't work. How do I fix this? Sorry about the bad wording. I am in ah hurry Information you might need to know: Server: Apache 2.2 Operating System: Windows 7 ULTIMATE

  Read the article

• Ubuntu hang, and cannot be soft-reset after resuming from stand by mode

  - by Phuong Nguyen

  I have downgrade my xorg drivers, so I can hibernate and stand by my ubuntu smoothly. However, in some case, there's a problem. My ubuntu get hang. When I tried to switch to console mode (Ctrl+Alt+F1), then I cannot login. The system always reply with an error whenever I tried to press a key. When I press Ctrl+Alt+Del to perform a softreset, here what's it said: [80141.320122] end_request: I/O error, dev sda, sector 193687181 init: control-alt-delete main process (5660) terminated with status 2. This error is not even recorded in syslog. I guess this should be a problem with my hard disk since it said something about a bad sector. Exactly, what kind of error is this?

  Read the article

• Modify PATH variable for X11 during log-in

  - by user1028435

  I am working on some lab computers (read: no administrative rights) that, if I log in, I need to change the PATH variable as X11 starts. The reason is that I need to change the PATH variable at this time, as opposed to later, is that the Print Screen command seems to "bind" during login (forgive my bad explanation of this). Currently, I have a .bashrc script as a workaround: #!/bin/bash export PATH=/home/username/bin:$PATH I can make it work by starting a new X, but I was wondering if it is possible to change upon login. cat /etc/redhat-release tells me my distribution is: Red Hat Enterprise Linux Client release 5.8 (Tikanga)

  Read the article

• How do you explain ethernet cable problems to non networking people?

  - by Bryan McLemore

  We've recently been doing a large network migration in our datacenter. We've had a few cables in this start to deliver really bad pings (in excess of 500ms on a LAN) before they could be replaced. The cables we were replacing weren't made the best. They where all hand made and the runs were so short on some of them that the bend radius was definitely too tight. Some of them ran in bundles right in front of the heat exhaust of the power supplies. The cables were running ok until we started pulling the ones surrounding them out. Then a few started having the problem I mentioned above degrading performance and causing reliability issues. I'm trying to figure out the best way to explain this to non networking people. Is there any documentation that people could recommend or other methods?

  Read the article

• Samba / smbd on Centos 6.5

  - by Satalink

  I've installed Samba4 and have the smb.conf file as follows: [global] workgroup = WORKGROUP server string = Samba Server realm = REXIALO.COM netbios name = REXIALO.COM security = user map to guest = Bad Password bind interfaces only = no interfaces = lo venet0 log file = /var/log/samba/samba.log max log size = 1000 [webroot] path = /usr/local/apache/htdocs comment = Example.com webroot directory read only = No I can connect from the same server with smbclient. Localhost: # smbclient -L localhost -U root Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Sharename Type Comment --------- ---- ------- webroot Disk RexiAlo webroot directory IPC$ IPC IPC Service (RexiAlo Samba Server) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Server Comment --------- ------- Workgroup Master --------- -------Enter root's password: network: # smbclient -L rexialo.com -U Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Sharename Type Comment --------- ---- ------- webroot Disk RexiAlo webroot directory IPC$ IPC IPC Service (RexiAlo Samba Server) Domain=[WORKGROUP] OS=[Unix] Server=[Samba 4.1.11] Server Comment --------- ------- Workgroup Master --------- ------- The problem is when I try to map to the smb webroot from Windows 7, it asks for user/pass but just times out and then prompts for credentials. The samba.log file does not show any activity other than the startup of the smbd process. Any help would be appreciated.

  Read the article

• linux installation cd enviroment

  - by haw3d

  i recently make a custom linux system, for my special need. its on my HDD, but i want to create a cd for installation. multiple day ego, i found a livecd and create install script for that, but in power failure my HDD is gone, and i cant found that live cd again. my install script is based on recoverin tar.gz backup. my requorement is: based on glibc (not uclibc) recognize every devices have you any suggestion? excuse me for my bad english.

  Read the article

• What postgresql client version should I build against, if server is 8.x?

  - by Ben Voigt

  I'm planning updates to a system that is currently running with 8.x server on Windows, 8.x client on Windows, and 8.x client on Linux. Obviously that seems like a bad choice of platform in a mixed environment, but the Linux machine has no persistent writable storage (as an anti-rootkit measure). I'm concerned with compatibility between versions right now. Can a linux postgresql 9.0.x client connect to a Windows 8.x server? The server is using some third-party binary extensions, so upgrading it is a more involved task and will be done later. If combining a 9.0.x client and 8.x server is discouraged, would latest 8.x clients be able to continue to connect if I did upgrade the server first? META: What tag is appropriate for backward-compatibility questions?

  Read the article

• AWS RDS Mysql with benstalk Hibernate app: Character encoding issue

  - by TeraTon

  I'm running a webapp from amazon rds with tomcat 7 and spring, which uses hibernate as the persistence layer. The application and utf-8 encoding work properly on localhost, but for some reason when I deploy to amazon, the UTF-8 encoding breaks. I use mysql 5.5.27 on amazon rds and the table that we wish to update has collation set to utf8 - utf8_unicode_ci And in hibernate I have set: < prop key="hibernate.connection.charSet"UTF-8 UTF-8 characters get replaced by ??? and this is of course especially bad for passwords and usernames + email as it basically kills them. Anyone else encountered character encoding breaking when deploying to amazon?

  Read the article

• users connecting to remote desktop to use software

  - by Jordan

  Im an IT assistant at a CNC milling company and we use a program called made2manage. Its an ERP (enterprise resource management) software. Each license is something like 5k and instead of giving each employee there own copy of the software he has everyone that uses the program connect to a server that has a copy of m2m on it. Its slow when there are a bunch of people connected to it. But I guess they dont want to buy more licenses. Is there a better way to do something like this? How bad of a practice is this?

  Read the article

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >