Search Results

Search found 16188 results on 648 pages for 'connection broker'.

Page 340/648 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >

  • Alcatel-Lucent Boosts Broadband Over Copper To 300Mbps

    - by Ratman21
    alphadogg at Slashdot writes "Alcatel-Lucent has come up with a way to [0]move data at 300Mbps over copper lines. So far the results have only been reproduced in a lab environment — real products and services won't be available for at least a year. From the article: 'Researchers at the company's Bell Labs demonstrated the 300Mbps technology over a distance of 400 meters using VDSL2 (Very high bitrate Digital Subscriber Line), according to Stefaan Vanhastel, director of product marketing at Alcatel-Lucent Wireline Networks. The test showed that it can also do 100Mbps over a distance of 1,000 meters, he said. Currently, copper is the most common broadband medium. About 65 percent of subscribers have a broadband connection that's based on DSL, compared to 20 percent for cable and 12 percent for fiber, according to market research company Point Topic. Today, the average advertised DSL speeds for residential users vary between 9.2 Mbps and 1.9Mbps in various parts of the world, Point Topic said.'" Discuss this story at: http://tech.slashdot.org/comments.pl?sid=10/04/21/239243

    Read the article

  • That pestky Intel Centrino wireless N + WiMAX 6150 wireless card

    - by newb26
    I'm new to linix and just got Ubuntu up and running on my ASUS laptop last night. Aside from the wireless everything seems to be working. The card is able to recognize networks but cannot make a full connection. After I enter my password it will try to connect before asking for the password again after a few minutes. I know the issue isn't the password because I checked that I had the right one. I've done some poking around trying to find a way to get it work. Linix recognizes the card as well. I found a link to some drivers in a question someone had about a WiMAX 6250 card and am curious if anyone knows if they would also work for the 6150 I have in my machine: https://github.com/ago/wimax-tools If not what can I do?

    Read the article

  • Enabling SSL Requests on Jdev's Integrated Weblogic

    - by Christian David Straub
    Often times you will want to enable SSL access for such things as secure login or secure signup. By default, the integrated WLS that ships with JDev does not listen to SSL requests. However, this is easily fixed.Just navigate to http://127.0.0.1:7101/console. This will deploy the console app where you can configure WLS. By default the login credentials are:username: weblogicpassword: weblogic1Then go to Environment -> Servers -> DefaultServer. Check the "SSL Listen Port Enabled" box and your server will now listen to SSL requests (just make sure to use the listen port that is specified).For added security, you can always check while processing your request that it is going through an SSL connection by first checking HttpServletRequest.isSecure().

    Read the article

  • Could anyone help me get my NETGEAR WNA3100 (Broadcom BCM43231) wireless adapter to work?

    - by Matthew Carroll
    I have just moved back to Ubuntu from Windows 7 and a few months ago, I bought a NETGEAR WNA3100 wireless adapter because my old adapter had broken. I plugged in my adapter and it doesn't seem to work, I also used the windows 7 drivers for it and tried them on the program "Windows Wireless Drivers" and they don't seem to recognize the device. However I have heard you need XP drivers but I can't seem to find them on the internet nor find them on the CD. Could anyone help me get my wireless adapter to work? Any help is greatly appreciate. P.S I do have internet connection though I have to tether my phone to my computer and then connect my phone to my router.

    Read the article

  • how to improve concepts for interview

    - by Rahul Mehta
    Hi, I had given the interview , and interviewer tell me to improve the concepts , e.g. he ask me type of array ,and i answered two types of array simple array and associative array . e.g. 2 he ask me why you use pdo , and i answered we can use any database e.g. oracle , mysql and it helps in sql injection , then he ask me how it helps in sql injection then i was not having correct answer. e.g. 3 he ask me about persistent connection , i just use the mysql_pconnect i dont where it will be used and how . is there is any standard way to follow to improve concepts. Please suggest . Thanks

    Read the article

  • Salesforce deployment guideline using Sandbox

    - by ybbest
    Create Deployment connection Enable the inbound change set settings on the destination Environment you would like to deploy the solution to. Enable the outbound change set settings on the source Environment where you package your application. The best practice is to Package everything in the changeset and salesforce will only deploy the change into your destination environment. If you only package the change, you could miss some of the changes. You can clone the change set on the source destination however the initial packaging takes some time as you need to go through everything and select the components manually. After the change set is packaged, you need to upload the chagneset so that destination environment can see the change set in its incoming change set list. Click Validate the change set before deployment. References: Development Lifecycle Guide Change Sets Best Practices

    Read the article

  • How can I work around problems with certificate configuration in Remote Desktop Services?

    - by Michael Steele
    I am setting up a Remote Desktop Services farm, and am having trouble configuring certificates for it to use. A demonstration of the problem I'm seeing can be found in Step #4. At this point I am convinced that there are problems with the user interface, and am looking for ways around them. Is there any way to configure certificates in Remote Desktop Services so that the settings hold and are reflected in the GUI? If not, is there any way for me to verify that the settings are correct? Step #1 - Create certificate to be used. I've configured a certificate to use with RD Web Access. The certificate is stored with in the Certificates MMC on my RD Connection Broker, and I am configuring the farm from that computer. I found by letting RD Web Access generate its own certificate that the following properties are required: Enhanced Key Usage Server Authentication Client Authentication This may not be required, but the self-signed certificate includes it. Key Usage Digital Signature Key Agreement Subject Alternative Name DNS Name=domain.com Detour about self-signed certificate generation As a quick detour, I was able to work around a problem with creating self-signed certificates using powershell. The documentation for the New-RDCertificate cmdlet gives the following example: PS C:\> $password = ConvertTo-SecureString -string "password" -asplaintext -force New-RDCertificate -Role RDWebAccess -DnsName "test-rdwa.contoso.com" -Password $password -ConnectionBroker rdcb.contoso.com -ExportPath "c:\test-rdwa.pfx" Typing this into the shell will result in an error message claiming that a function, Get-Server cannot be found. Prior to using New-RDCertificate, you must import the RemoteDesktop Module with Import-Module RemoteDesktop. Step #2 - Observe out-of-box behavior The first time you visit the Deployment Properties dialog box by navigating to Server Manager - Remote Desktop Services - Collections and selecting "Edit Deployment Properties" from the "TASKS" dropdown list in the "COLLECTIONS" grouping, you will see the following screen: This window is misleading because the level field is listed as "Not Configured". If I understand correctly all three of the role services are using a self-signed certificate. For the RD Web Access role this can be verified by visiting the website: The certificate being used also appears in the Certificates MMC: Step #3 - Assign new certificate The Deployment Properties dialog box will allow me to select my existing certificate. The certificate must be placed within the local computers Certificates MMC in the "Personal" certificate store. The private key will need to be exportable, and you will need to provide the password. I temporarily exported my certificate to a file named temp.pfx with a password, and then imported it into Remote Desktop Services from there. Once this is done the GUI will indicate that it is ready to accept the new configuration. Once I click the "Apply" button, the GUI indicates success. This can be verified by visiting the RD Web Access web site a second time. There is no certificate error. Step #4 - The GUI fails to maintain its state If the GUI is closed and reopened, all of these settings appear to be lost. Actually, the certificate I configured is still being used. I am able to continue accessing the RD Web Access site without any certificate errors. Oddly, if I use the "Create new certificate..." button to generate a self-signed certificate this window will update to an "Untrusted" level. This setting will then be maintained through the opening and closing of the Deployment Properties dialog box. Is there anything I can do to have my settings appear to stick? I feel like something is wrong when the GUI claims I haven't fully configured certificates.

    Read the article

  • No Internet On 12.04.1

    - by David Ramos
    I have no internet on Ubuntu 12.04.1 so i'm on a desktop so I got to install a .exe program to run my wireless card for my desktop so I got internet access, But I can't seem to download wine or its source files. If I do I put on my usb and boot into Ubuntu but then when I try to open it I get the programs source files etc. Anyone who could help me Please do :| ( I can't install wine from software center since I have no connection online). Note : I can download my stuff on windows 8 boot so I can transfer files to my usb to run on Ubuntu.

    Read the article

  • SQL Azure maximum database size rises from 10GB to 50GB in June

    - by Eric Nelson
    At Mix we announced that we will be offering a new 50gb size option in June. If you would like to become an early adopter of this new size option before generally available, send an email to [email protected]  and it will auto-reply with instructions to fill out a survey to nominate your application that requires greater than 10gb of storage. Other announcements included: MARS in April: Execute multiple batches in a single connection Spatial Data in June: Geography and geometry types SQL Azure Labs: SQL Azure Labs provides a place where you can access incubations and early preview bits for products and enhancements to SQL Azure. Currently OData Service for SQL Azure. Related Links: SQL Azure Announcements at MIX http://ukazure.ning.com

    Read the article

  • Setting up UPS monitoring

    - by Andrew Heath
    I have acquired a second hand Uninterrupted Power Supply (UPS) that I have refurbished (new battery) and hope to use with my Ubuntu 12.10 system. It's a SOLA 330 with serial out. I have installed NUT Metapackage and NUT Monitor from Software Centre, but am not sure how to go about setting it all up. A Google search brings up several ways of configuring Network UPS Tools (NUT) or HAL-Drivers, however, HAL-Drivers appears to be obsolete and many commands and config files mentioned to edit do not exist in 12.10 or the current version of NUT (most articles are a few years old). One tutorial seemed to work except the Error: no UPS definitions found in ups.conf even though ups.conf has values in it as laid out in the tutorial. How do I go about setting my system to monitor the UPS for a shut down signal? Also, is there a command to determine the UPS is communicating through the serial connection and on what port (to help with setup and configuring, eg. /dev/ttyS0 is mentioned in one of the tutorials I read).

    Read the article

  • How do I route my SMTP outgoing mail through gmail (Google Mail) ?

    - by Paula DiTallo
    Here is the quick answer:  Go into your client e software (e.g. Outlook, Thunderbird, etc.) for the account you are working on (usually default). Set the SMTP server to smtp.gmail.com Set the username as your gmail account user name (e.g. [email protected]). Gmail will need the username and password you use for that account, so if your default is set to some other email, be sure to set the username and password to that value, or click on the checkbox for username/password. Check TLS as the secure connection.   If you are looking for more in-depth info, check out Gina Trapani 's block on the topic.

    Read the article

  • Cannot connect to secure wireless with Netgear wna3100 USB

    - by Vince Radice
    I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

    Read the article

  • Ubuntu 12.04 Problem connecting Internet by Mobile Broadband through LG GU220

    - by arnab.b
    I am using Ubuntu 12.04. I use my LG cellphone titled GU220 using Aircel connection .. The phone gets connected as an USB device well enough bt the network always fails to connect whenever I try to connect through mobile broadband.. I also have Windows 7 which does not fails to connect the network through PC Suite. tried it several times even after restarting both phone and Ubuntu bt in vain. Also fr 1st two days things worked well and the network was well connected, the problem started just after those two days-in from the next login..

    Read the article

  • Accessibility bus warning when opening files in Eclipse from command line (Ubuntu 13.10)

    - by Reese
    Similar to closed issue Gnome Menu Broken? When opening a file from the command line for edits in Eclipse , I get this warning: ** (eclipse:nnnn): WARNING **: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. The 4-digit number at (eclipse:nnnn) changes each time I issue an 'eclipse some/file.ext' command. The file opens but the warning is an annoyance that shouldn't be happening, it may be indicative of some other problem. Updated Ubuntu 13.10 64-bit, updated Eclipse Luna.

    Read the article

  • Website Access...DNS, ISP, issue?

    - by sublet
    This isn't so much a code issue as it might be an issue with my ISP. For some reason when I visit a site very often, like one I manage or write stories on, it will just stop pulling data down after a while. It's very random when it happens, but probably happens once a week. If effects everyone who is accessing the site from this connection, and I can access other sites no problem. Also, if I go outside the office back home, which is right down the street, and access the site it is fine. I'm using Comcast in both locations. It's almost as if I have a limit on requests to each site and have hit my limit so it blocks the site for a while. Anybody have any clue what this might be?

    Read the article

  • WiFi not working in Ubuntu 13.10 with Ralink RT3290

    - by Francisco
    I have upgraded from Ubuntu 13.04 to Ubuntu 13.10 and now my WiFi doesn't work. It takes a lot of time to connect but when connected, connection is quickly lost again. In Ubuntu 13.04 worked fine. Here are some outputs: lspci | grep Wireless 01:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsmod | grep rt2800 rt2800pci 18966 0 rt2800lib 95449 1 rt2800pci rt2x00pci 13287 1 rt2800pci rt2x00mmio 13661 1 rt2800pci rt2x00lib 56053 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio mac80211 634661 3 rt2x00lib,rt2x00pci,rt2800lib eeprom_93cx6 13344 1 rt2800pci crc_ccitt 12707 1 rt2800lib dmesg | grep rt2800 [ 19.959959] rt2800pci 0000:01:00.0: irq 46 for MSI/MSI-X modinfo rt2800pci | grep 3290 alias: pci:v00001814d00003290sv*sd*bc*sc*i*

    Read the article

  • Hamachi² configuration file... Where is it?

    - by Cinaed666
    I recently installed hamachi² and haguichi on my 10.10 machine. It works, but it loses its connection every few minutes and I have to reconnect. I looked into this, and apparently I need to set the KeepAlive in the configuration file to 100. This shouldn't be a hard task, so I looked for the hamachi directory. I checked the obvious place: /home/username/.hamachi ... but this directory doesn't exist. (Yes, I did enable hidden files.) After doing a file search for hamachi, it returned nothing either. I'm in the dark here, what am I missing?

    Read the article

  • How To Make FileZilla Open All The Required Files With One Click

    - by Omar Tariq
    Is there any way of configuring FileZilla so that I can open all the files on a server that I use to edit with just one click. For example if the files are like this:- /home/abc/def/one.txt /home/abc/def/yet/another/directory/two.txt /home/abc/def/ghi/yet/another/directory/three.txt then it is very time-consuming to navigate through each directory and open the required files. These are only 3 files but what if we have around 10 to 20 files? Yes, copying the path of the directories is one thing. But something that is built-in so that I can just click a button like open all the required files of this connection and it opens all the files in the editor (as set in FileZilla preferences) then that would be great!

    Read the article

  • Building a database class in PHP

    - by Sprottenwels
    I wonder if I should write a database class for my application, and if so, how to accomplish it? Over there on SO, a guy mentioned it should be written as an abstract class. However, I can't understand why this would be a benefit. Do I understand correctly, that if I would write an abstract class, every other class that methods will need a database connection, could simply extend this abstract class and have it's own database object? If so, how is this different from a "normal" class where I could instantiate an database object? Another method would be to completely forget about my own class and to instantiate a mysqli object on demand. What do you recommend?

    Read the article

  • AutoSSH for a robust tunnel

    - by Budric
    I'm trying to start an ssh tunnel from A to B and have it run despite things like: period network/wifi drops on A and remote server reboot on B. My ssh tunnel starts using upstart script on A with event start on (net-device-up IFACE=eth0) I've found autossh which is supposed to handle these kinds of things, but had some trouble getting it to work. The upstart executes: autossh -M 0 -2qTN -o "ServerAliveInterval 30" -o "ServerAliveCountMax 2" -L 5678:somehost:5678 user@B However when I log into B and kill -9 that tunnel session, autossh just exits with "Connection to B closed by remote host." That's not what I expected autossh to do. Any advice on how to set this up? Any GUI service monitoring utilities out there that essentially display a green light if a service is up? Thanks.

    Read the article

  • How Microwave Ovens Work [Video]

    - by Jason Fitzpatrick
    In this informative how-it-works video, we’re treated to a peek inside the common microwave and the science behind the magnetron that powers it. Bill details how a microwave oven heats food. He describes how the microwave vacuum tube, called a magnetron, generates radio frequencies that cause the water in food to rotate back and forth. He shows the standing wave inside the oven, and notes how you can measure the wavelength with melted cheese. He concludes by describing how a magnetron generates radio waves. [via Make] How to Banish Duplicate Photos with VisiPic How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It?

    Read the article

  • Electrified Light Saber Helps You Slay Bugs Like a Jedi [Video]

    - by Jason Fitzpatrick
    This fun little DIY project combines a toy light saber with the guts of an electrified fly-swatter to yield a bug slaying sword perfect for your epic battles against the Empire’s tiniest soldiers. Courtesy of Caleb over at Hack A Day, the build is surprisingly simple and quick to put together (if you’re handy with a screw driver and soldering iron). Check out the video above to see the build and the results or hit up the link below to read more about it. Building a Bug Zapping Light Saber [Hack A Day] How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

    Read the article

  • Apache on Mac Mavericks issue [migrated]

    - by Michael
    Trying to run Apache so that I can create a testing server on my mac.When I start apache it starts, but it doesn't run (no connection to local host. Ill upload the unix,you'll see that after starting there is no processes, and I did a check to show you what was running on my port 80... I don't entirely know that means. Michaels-MacBook-Pro-3:~ michaelramos$ sudo apachectl start Michaels-MacBook-Pro-3:~ michaelramos$ ps aux | grep httpd michaelramos 348 0.0 0.0 2442000 624 s000 S+ 8:51AM 0:00.00 grep httpd Michaels-MacBook-Pro-3:~ michaelramos$ sudo apachectl start org.apache.httpd: Already loaded Michaels-MacBook-Pro-3:~ michaelramos$ sudo lsof -i ':80' COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME ocspd 96 root 18u IPv4 0x8402f926599c58df 0t0 TCP dhcp-92-67.radford.edu:49267->108.162.232.196:http (ESTABLISHED) ocspd 96 root 20u IPv4 0x8402f926599c58df 0t0 TCP dhcp-92-67.radford.edu:49267->108.162.232.196:http (ESTABLISHED) ocspd 96 root 21u IPv4 0x8402f926599c50f7 0t0 TCP dhcp-92-67.radford.edu:49268->108.162.232.206:http (ESTABLISHED) ocspd 96 root 23u IPv4 0x8402f926599c50f7 0t0 TCP dhcp-92-67.radford.edu:49268->108.162.232.206:http (ESTABLISHED)

    Read the article

  • Sending a android.content.Context parameter to a function with JNI

    - by Ef Es
    I am trying to create a method that checks for internet connection that needs a Context parameter. The JNIHelper allows me to call static functions with parameters, but I don't know how to "retrieve" Cocos2d-x Activity class to use it as a parameter. public static boolean isNetworkAvailable(Context context) { boolean haveConnectedWifi = false; boolean haveConnectedMobile = false; ConnectivityManager cm = (ConnectivityManager) context.getSystemService( Context.CONNECTIVITY_SERVICE); NetworkInfo[] netInfo = cm.getAllNetworkInfo(); for (NetworkInfo ni : netInfo) { if (ni.getTypeName().equalsIgnoreCase("WIFI")) if (ni.isConnected()) haveConnectedWifi = true; if (ni.getTypeName().equalsIgnoreCase("MOBILE")) if (ni.isConnected()) haveConnectedMobile = true; } return haveConnectedWifi || haveConnectedMobile; } and the c++ code is JniMethodInfo methodInfo; if ( !JniHelper::getStaticMethodInfo( methodInfo, "my/app/TestApp", "isNetworkAvailable", "(android/content/Context;)V")) { //error return; } CCLog( "Method found and loaded!"); methodInfo.env->CallStaticVoidMethod( methodInfo.classID, methodInfo.methodID); methodInfo.env->DeleteLocalRef( methodInfo.classID);

    Read the article

  • Creating a remote management interface

    - by Johnny Mopp
    I'm looking for info on creating a remote management interface for our software. This is not anything illicit. Our software is for live TV production and once they go on-air we can't access the PC (usually through LogMeIn). I would like to be able to upload/download files and issue commands to our software. The commands would be software specific like "load this file" or "run this script" or "return this value" etc. A socket connection is preferred but the problem is most of our PCs are behind firewalls and NAT servers. I'm not sure where to start. I think HTTP tunneling is the way to go but am wondering if there are other options or recommendations. Also, assume our clients are not willing to open up ports for security reasons. Thanks.

    Read the article

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >