Search Results

Search found 17924 results on 717 pages for 'in order'.

Page 340/717 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >

• Raspberry Pi and Java SE: A Platform for the Masses

  - by Jim Connors

  One of the more exciting developments in the embedded systems world has been the announcement and availability of the Raspberry Pi, a very capable computer that is no bigger than a credit card.  At $35 US, initial demand for the device was so significant, that very long back orders quickly ensued. After months of patiently waiting, mine finally arrived.  Those initial growing pains appear to have been fixed, so availability now should be much more reasonable. At a very high level, here are some of the important specs: Broadcom BCM2835 System on a chip (SoC) ARM1176JZFS, with floating point, running at 700MHz Videocore 4 GPU capable of BluRay quality playback 256Mb RAM 2 USB ports and Ethernet Boots from SD card Linux distributions (e.g. Debian) available So what's taking place taking place with respect to the Java platform and Raspberry Pi? A Java SE Embedded binary suitable for the Raspberry Pi is available for download (Arm v6/7) here.  Note, this is based on the armel architecture, a variety of Arm designed to support floating point through a compatibility library that operates on more platforms, but can hamper performance.  In order to use this Java SE binary, select the available Debian distribution for your Raspberry Pi. The more recent Raspbian distribution is based on the armhf (hard float) architecture, which provides for more efficient hardware-based floating point operations.  However armhf is not binary compatible with armel.  As of the writing of this blog, Java SE Embedded binaries are not yet publicly available for the armhf-based Raspbian distro, but as mentioned in Henrik Stahl's blog, an armhf release is in the works. As demonstrated at the just-completed JavaOne 2012 San Francisco event, the graphics processing unit inside the Raspberry Pi is very capable indeed, and makes for an excellent candidate for JavaFX.  As such, plans also call for a Pi-optimized version of JavaFX in a future release too. A thriving community around the Raspberry Pi has developed at light speed, and as evidenced by the packed attendance at Pi-specific sessions at Java One 2012, the interest in Java for this platform is following suit. So stay tuned for more developments...

  Read the article

• Disable MOUSE wakeup when doing suspend on UBUNTU

  - by Shadyabhi

  When I do SUSPEND on ubuntu, in order to wake up, i can just move the mouse and the computer will wake up. But, I dont want that the computer is waked up when I move my mouse. How can I do that? My /proc/acpi/wakeup file:- shadyabhi@shadyabhi-desktop:~$ cat /proc/acpi/wakeup Device S-state Status Sysfs node SLPB S4 *enabled P32 S4 disabled pci:0000:00:1e.0 UAR1 S4 disabled pnp:00:09 ILAN S4 disabled pci:0000:00:19.0 PEGP S4 disabled PEX0 S4 disabled pci:0000:00:1c.0 PEX1 S4 disabled pci:0000:00:1c.1 PEX2 S4 disabled pci:0000:00:1c.2 PEX3 S4 disabled pci:0000:00:1c.3 PEX4 S4 disabled pci:0000:00:1c.4 PEX5 S4 disabled UHC1 S3 disabled pci:0000:00:1d.0 UHC2 S3 disabled pci:0000:00:1d.1 UHC3 S3 disabled pci:0000:00:1d.2 UHC4 S3 disabled EHCI S3 disabled pci:0000:00:1d.7 EHC2 S3 disabled pci:0000:00:1a.7 UH42 S3 disabled pci:0000:00:1a.0 UHC5 S3 disabled pci:0000:00:1a.1 UHC6 S3 disabled pci:0000:00:1a.2 AZAL S3 disabled pci:0000:00:1b.0 shadyabhi@shadyabhi-desktop:~$

  Read the article

• Permission forbidden on localhost with apache2

  - by N Alex

  Here is what I am trying to do. I tried to add another folder to apache and I get the following error when trying to acces testing/index.html. The idea is that I would like to have for every customer a folder like /home/neagoe/Work/InterWebs/Projects/[PROJECT NAME]/CustomerProjects/website/dist. Forbidden You don't have permission to access /index.html on this server. Apache/2.2.22 (Ubuntu) Server at testing Port 80 Here are the steps that I followed: Step1: sudo chmod a+x /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist Step2: sudo chown -R www-data:www-data /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist sudo chmod -R 775 /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist Step3: sudo adduser $USER www-data Step4: sudo a2enmod userdir Step5: sudo cp /etc/apache/sites-available/default /etc/apache/sites-available/testing I edited the file /etc/apache/sites-available/testing so it looks like this: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName testing DocumentRoot /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/neagoe/Work/InterWebs/Projects/testing/CustomerProjects/website/dist/ > Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Step6: I edited hosts ("/etc/hosts") so it looks like this: 127.0.0.1 localhost 127.0.0.1 testing # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters Step7: sudo a2ensite testing sudo service apache2 restart I searched for about 2 hours on the internet but I can't figure out what went wrong. All the pages that I found following the same steps as described above. I know there are similar questions here on the internet, but the answer is to change permission to the directory which I did on Step2. I am sorry if this is really a duplicate but I could't find the right answer. Thank you! PS. I asked this also on AskUbuntu but didn't get any answers so I'm trying my luck here. Edit: There isn't much on the error log or the access log. On the access.log: ::1 - - [10/Aug/2013:11:23:28 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:29 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:31 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:32 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:33 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:34 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:35 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" 127.0.0.1 - - [10/Aug/2013:11:23:23 +0300] "POST /wordpress-testing/wp-cron.php?doing_wp_cron=1376123003.7026669979095458984375 HTTP/1.0" 200 705 "-" "WordPress/3.6; http://localhost/wordpress-testing" ::1 - - [10/Aug/2013:11:23:36 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:37 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" ::1 - - [10/Aug/2013:11:23:38 +0300] "OPTIONS * HTTP/1.0" 200 126 "-" "Apache/2.2.22 (Ubuntu) (internal dummy connection)" 127.0.0.1 - - [10/Aug/2013:11:31:32 +0300] "GET /index.html HTTP/1.1" 200 485 "-" "Mozilla/5.0 (X11; Ubuntu; Linux x86_64; rv:23.0) Gecko/20100101 Firefox/23.0" And the last line repeats for about 200 rows. On the error.log: 1. This lines repeat from time to time. PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525 /msql.so' - /usr/lib/php5/20100525/msql.so: cannot open shared object file: No such file or directory in Unknown on line 0 [Sat Aug 10 13:06:42 2013] [notice] Apache/2.2.22 (Ubuntu) PHP/5.4.9-4ubuntu2.2 configured -- resuming normal operations [Sat Aug 10 13:07:36 2013] [notice] caught SIGTERM, shutting down PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20100525/msql.so' - /usr/lib/php5/20100525/msql.so: cannot open shared object file: No such file or directory in Unknown on line 0 [Sat Aug 10 13:07:37 2013] [notice] Apache/2.2.22 (Ubuntu) PHP/5.4.9-4ubuntu2.2 configured -- resuming normal operations 2. And this is the predominant error. (hundreds of lines) [Sat Aug 10 13:07:40 2013] [error] [client 127.0.0.1] (13)Permission denied: access to /index.html denied

  Read the article

• Script/tool to import series of snapshots, each being a new revision, into Subversion, populating source tree?

  - by Rob

  I've developed code locally and taken a fairly regular snapshot whenever I reach a significant point in development, e.g. a working build. So I have a long-ish list of about 40 folders, each folder being a snapshot e.g. in ascending date YYYYMMDD order, e.g.:- 20100523 20100614 20100721 20100722 20100809 20100901 20101001 20101003 20101104 20101119 20101203 20101218 20110102 I'm looking for a script to import each of these snapshots as a new subversion revision to the source tree. The end result being that the HEAD revision is the same as the last snapshot, and other revisions are as numbered. Some other requirements: that the HEAD revision is not cumulative of the previous snapshots, i.e., files that appeared in older snapshots but which don't appear in later ones (e.g. due to refactoring etc.) should not appear in the HEAD revision. meanwhile, there should be continuity between files that do persist between snapshots. Subversion should know that there are previous versions of these files and not treat them as brand new files within each revision. Some background about my aim: I need to formally revision control this work rather than keep local private snapshot copies. I plan to release this work as open source, so version controlling would be highly recommended I am evaluating some of the current popular version control systems (Subversion and GIT) BUT I definitely need a working solution in Subversion. I'm not looking to be persuaded to use one particular tool, I need a solution for each tool I am considering as I would also like a solution in GIT (I will post an answer separately for GIT so separate camps of folks who have expertise in GIT and Subversion will be able to give focused answers on one or the other). The same question but for GIT: Script/tool to import series of snapshots, each being a new edition, into GIT, populating source tree? An outline answer for Subversion in stackoverflow.com but not enough specifics about the script: what commands to use, code to check valid scenarios if necessary - i.e. a working script basically. http://stackoverflow.com/questions/2203818/is-there-anyway-to-import-xcode-snapshots-into-a-new-svn-repository

  Read the article

• MVC Validation with ModelState.isValid through a wizard

  - by Emmanuel TOPE

  I'm working on a small educational project on MVC 3, and I'm facing a small problem, when attempting to handle validation in my application through a wizard. I tried to get benefit from the ability of MVC3 to deliver content of a different view using the same URL, when handling an [HttpPost] method on a page. I my case,my main model's class contains about ten [Required] properties, that I would like to expose through a small wizard in 3 steps , So I want that the user may be able to enter his personal informations in the first step, then respond to some questions in the second stepp and finally receive a confirmation mail from the web application whit his credentials in the last step. I can't access the last step, because of the ModelState.isValid method that I use to handle validations, and which can't perform properly if I define some properties as [Required], but don't put them on the first view. As the replies to those questions remain in a couple of choices, I've thinked that I may use some nullable bool? for in order to avoid validation issues, but know that it's not the proper way. Are there someone who would like to help me find a way to extend my validation to those three steps ? Thanks in advance and sorry for my english, I'm not a native speaker.

  Read the article

• Deleting a row from self-referencing table

  - by Jake Rutherford

  Came across this the other day and thought “this would be a great interview question!” I’d created a table with a self-referencing foreign key. The application was calling a stored procedure I’d created to delete a row which caused but of course…a foreign key exception. You may say “why not just use a the cascade delete option?” Good question, easy answer. With a typical foreign key relationship between different tables which would work. However, even SQL Server cannot do a cascade delete of a row on a table with self-referencing foreign key. So, what do you do?…… In my case I re-wrote the stored procedure to take advantage of recursion:   -- recursively deletes a Foo ALTER PROCEDURE [dbo].[usp_DeleteFoo]      @ID int     ,@Debug bit = 0    AS     SET NOCOUNT ON;     BEGIN TRANSACTION     BEGIN TRY         DECLARE @ChildFoos TABLE         (             ID int         )                 DECLARE @ChildFooID int                        INSERT INTO @ChildFoos         SELECT ID FROM Foo WHERE ParentFooID = @ID                 WHILE EXISTS (SELECT ID FROM @ChildFoos)         BEGIN             SELECT TOP 1                 @ChildFooID = ID             FROM                 @ChildFoos                             DELETE FROM @ChildFoos WHERE ID = @ChildFooID                         EXEC usp_DeleteFoo @ChildFooID         END                                    DELETE FROM dbo.[Foo]         WHERE [ID] = @ID                 IF @Debug = 1 PRINT 'DEBUG:usp_DeleteFoo, deleted - ID: ' + CONVERT(VARCHAR, @ID)         COMMIT TRANSACTION     END TRY     BEGIN CATCH         ROLLBACK TRANSACTION         DECLARE @ErrorMessage VARCHAR(4000), @ErrorSeverity INT, @ErrorState INT         SELECT @ErrorMessage = ERROR_MESSAGE(), @ErrorSeverity = ERROR_SEVERITY(), @ErrorState = ERROR_STATE()         IF @ErrorState <= 0 SET @ErrorState = 1         INSERT INTO ErrorLog(ErrorNumber,ErrorSeverity,ErrorState,ErrorProcedure,ErrorLine,ErrorMessage)         VALUES(ERROR_NUMBER(), @ErrorSeverity, @ErrorState, ERROR_PROCEDURE(), ERROR_LINE(), @ErrorMessage)         RAISERROR (@ErrorMessage, @ErrorSeverity, @ErrorState)     END CATCH   This procedure will first determine any rows which have the row we wish to delete as it’s parent. It then simply iterates each child row calling the procedure recursively in order to delete all ancestors before eventually deleting the row we wish to delete.

  Read the article

• Moving case sensitive Linux files via Windows

  - by sunwukung

  Hi the company I work for is currently trying to move a Magento installation from one server to another - however, the product images are saved in folders alphabetically indexed folders - but with an added twist, some of the letters are the same but have a different case - i.e. a, A, b, C, D, e, E, f, F, G, h, I That being the case, when we try to drag those files down from FTP in order to move them, Windows does not honour the case sensitive distinction and we are losing several image folders. Is there a simple workaround for this issue? Any help is greatly appreciated. regards SWK

  Read the article

• Maximizing TCP connections on HAProxy load balancer

  - by imaginative

  I am currently using HAProxy in order to load balance tcp connections from clients to my Erlang app server. The connection is persistent, which means I'm limited to roughly 64K clients on an optimized server (I'm currently running HAProxy on an m1.large EC2 instance). My app server is designed to horizontally scale based on the number of TCP connections. What's worrying me though is I'll need an equal number of HAProxy servers as app servers since it's a 1:1 connection. Is there currently a way to "proxy" the tcp connection to the app server so that once HAProxy sends the client off to my Erlang server, it can free up the connection, ready to serve another client? Are there any papers, existing solutions out there I can read so that I only have to worry about the 64K limit on my app servers, and not on the load balancing servers themselves?

  Read the article

• Entity Component System for HUD and GUI

  - by Jason L.

  This is a very rough sketch of how I currently have things designed. It should, at least, give an idea of how my ECS is currently designed. If you notice in that diagram, I have basically split the HUD out of the ECS. They have their own set of things (HudLayer, HudComponent, etc) and are handled differently. This is where I'm struggling, though. There are many different instances in which the HUD will need to know about entities. Not just data changing (I have an event dispatcher for that), but the actual entity and all it encompasses. There are also situations where entities will need to be able to query the HUD for data. Let's take a couple examples: First, my equipment screen. On here I can change the equipment on a character (Entity). In order for this to happen, I need to know about the entity. At least I think I do? How can I handle this? The second scenario involves my Systems needing to query a HudComponent for data. A specific example would be my battle system. Each "team" is given a 3x3 grid they can move around in. See here: Skills target these cells, and not the player, so I would need a way for my systems to determine which cells are occupied and which are not. Basically I need a way for two way communication between Systems and my HUD. I know it's recommended (by some people, anyways) to take your HUD out of the ECS. Is that appropriate in my case?

  Read the article

• Requesting quality analysis test cases up front of implementation/change

  - by arin

  Recently I have been assigned to work on a major requirement that falls between a change request and an improvement. The previous implementation was done (badly) by a senior developer that left the company and did so without leaving a trace of documentation. Here were my initial steps to approach this problem: Considering that the release date was fast approaching and there was no time for slip-ups, I initially asked if the requirement was a "must have". Since the requirement helped the product significantly in terms of usability, the answer was "If possible, yes". Knowing the wide-spread use and affects of this requirement, had it come to a point where the requirement could not be finished prior to release, I asked if it would be a viable option to thrash the current state and revert back to the state prior to the ex-senior implementation. The answer was "Most likely: no". Understanding that the requirement was coming from the higher management, and due to the complexity of it, I asked all usability test cases to be written prior to the implementation (by QA) and given to me, to aid me in the comprehension of this task. This was a big no-no for the folks at the management as they failed to understand this approach. Knowing that I had to insist on my request and the responsibility of this requirement, I insisted and have fallen out of favor with some of the folks, leaving me in a state of "baffledness". Basically, I was trying a test-driven approach to a high-risk, high-complexity and must-have requirement and trying to be safe rather than sorry. Is this approach wrong or have I approached it incorrectly? P.S.: The change request/improvement was cancelled and the implementation was reverted back to the prior state due to the complexity of the problem and lack of time. This only happened after a 2 hour long meeting with other seniors in order to convince the aforementioned folks.

  Read the article

• Mod_rewrite not working on ISPConfig 3 Server

  - by Akahadaka

  Problem I recently migrated a Drupal site from a shared hosting server to my own VM. Everything appears to work correctly, except clean urls. My VM Setup Ubuntu 10.04 LAMP ISPConfig 3 What I've tried From reading up on a number of drupal forums I've tried the following in this order Check that mod_rewrite is installed and enabled Changed PHP from FastCGI to Mod_PHP (prefer to use FastCGI or suPHP though to avoid having tmp/files folders with 777 permissions) Changed the Redirect type to L in ISPConfig Sites-domain.com-Redirect Changed /etc/apache2/sites-enabled/000-default <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All ... </Directory> Not sure about points 3 and 4, I do want all domains to be able to use mod_rewrite out of the box. Question Have I done something wrong or am I missing a step? Ultimately I would like to use FastCGI and clean urls working on all ISPConfig 3 domains without having to make any changes to individual domain settings. Any ideas appreciated, I'll try them all.

  Read the article

• Why maven so slow compared to automake?

  - by ???'Lenik

  I have a Maven project consists of around 100 modules. I have reason to decompose the project to so many modules, and I don't think I should merge them in order to speed up the build process. I have read a lot of projects by other people, e.g., the Maven project itself, and Apache Archiva, and Hudson project, they all consists of a lot of modules, nearly 100 maybe, more or less. The problem is, to build them all need so much time, 3 hours for the first time build (this is acceptable because a lot of artifacts to download), and 15 minutes for the second build (this is not acceptable). For automake, things are similarly, the first time you need to configure the project, to prepare the magical config.h file, it's far more complex then what maven does. But it's still fast, maybe 10 seconds on my Debian box. After then, make install requires maybe 10 minutes for the first time build. However, when everything get prepared, the .o object files are generated, they don't have to be rebuild at all for the second time build. (In Maven, everything rebuild at everytime.) I'm very wondering, how guys working for Maven projects can bare this long time for each build, I'm just can't sit down calmly during each time Maven build, it took too long time, really.

  Read the article

• AuthInfoRequired cups overwrites

  - by mooscape

  My problem is basically identical to the following: http://bbs.archlinux.org/viewtopic.php?id=61826 Put simply, I have a machine in ubuntu trying to connect to another ubuntu machine via a network in order to use the printer attached. There is no problem printing until I restart the guest machine. Immediately it overwrites the printers.conf file (under /etc/cups/printers.conf). It always adds the same line: AuthInfoRequired username,password I stop cups and change it to *#*AuthInfoRequired username,password to comment out the command. Start cups. Works great 'til the next shutdown. Then it gets overwritten again. Googling indicates it may be GTK problem and not CUPS, but I have found no permanent solution to date. Any suggestions appreciated ....

  Read the article

• "Programming error" exceptions - Is my approach sound?

  - by Medo42

  I am currently trying to improve my use of exceptions, and found the important distinction between exceptions that signify programming errors (e.g. someone passed null as argument, or called a method on an object after it was disposed) and those that signify a failure in the operation that is not the caller's fault (e.g. an I/O exception). As far as I understand, it makes little sense for an immediate caller to actually handle programming error exceptions, he should instead assure that the preconditions are met. Only "outer" exception handlers at task boundaries should catch them, so they can keep the system running if a task fails. In order to ensure that client code can cleanly catch "failure" exceptions without catching error exceptions by mistake, I create my own exception classes for all failure exceptions now, and document them in the methods that throw them. I would make them checked exceptions in Java. Now I have a few questions: Before, I tried to document all exceptions that a method could throw, but that sometimes creates an unwiedly list that needs to be documented in every method up the call chain until you can show that the error won't happen. Instead, I document the preconditions in the summary / parameter descriptions and don't even mention what happens if they are not met. The idea is that people should not try to catch these exceptions explicitly anyway, so there is no need to document their types. Would you agree that this is enough? Going further, do you think all preconditions even need to be documented for every method? For example, calling methods in IDisposable objects after calling Dispose is an error, but since IDisposable is such a widely used interface, can I just assume a programmer will know this? A similar case is with reference type parameters where passing null makes no conceivable sense: Should I document "non-null" anyway? IMO, documentation should only cover things that are not obvious, but I am not sure where "obvious" ends.

  Read the article

• Session serialization in JavaEE environment

  - by Ionut

  Please consider the following scenario: We are working on a JavaEE project for which the scalability starts to become an issue. Up until now, we were able to scale up but this is no longer an option. Therefore we need to consider scaling out and preparing the App for a clustered environment. Our main concern right now is serializing the user sessions. Sadly, we did not consider from the beginning the issue and we are encountering the following excetion: java.io.WriteAbortedException: writing aborted; java.io.NotSerializableException: org.apache.catalina.session.StandardSessionFacade I did some research and this exception is thrown because there are objects stored on the session which does not implement the Serializable interface. Considering that all over the app there are quite a few custom objects which are stored on the session without implementing this interface, it would require a lot of tedious work and dedication to fix all these classes declaration. We will fix all this declarations but the main concern is that, in the future, there may be a developer which will add a non Serializable object on the session and break the session serialization & replication over multiple nodes. As a quick overview of the project, we are developing using a home grown framework based on Struts 1 with the Servlet 3.0 API. This means that at this point, we are using the standard session.getAttribute() and session.setAttribute() to work with the session and the session handling is scattered all over the code base. Besides updating the classes of the objects stored on session and making sure that they implement the Serializable interface, what other measures of precaution should we take in order to ensure a reliable Session replication capability on the Application layer? I know it is a little bit late to consider this but what would be the best practice in this case? Furthermore, are there any other issues we should consider regarding this transition? Thank you in advance!

  Read the article

• Mountain Lion fails to connect to Windows share after the connection is interrupted

  - by T Reddy

  I have a Windows 7 share that my Mountain Lion Macbook Pro connects to. The windows share is simply a user account. For whatever reason, when my connection gets interrupted, the mac will show a dialog stating as such and will ask me to ignore or disconnect. From this point forward, I cannot re-establish the connection from the mac to the windows share (even if I reboot the mac). I always have to reboot the windows machine in order for my mac to see the share again. My Windows share is my media center, so I'm not always able to reboot the machine because it is recording TV. Has anybody else encountered this problem and if so how is it resolved?

  Read the article

• Flickering when accessing texture by offset

  - by TravisG

  I have this simple compute shader that basically just takes the input from one image and writes it to another. Both images are 128/128/128 in size and glDispatchCompute is called with (128/8,128/8,128/8). The source images are cleared to 0 before this compute shader is executed, so no undefined values should be floating around in there. (I have the appropriate memory barrier on the C++ side set before the 3D texture is accessed). This version works fine: #version 430 layout (location = 0, rgba16f) uniform image3D ping; layout (location = 1, rgba16f) uniform image3D pong; layout (local_size_x = 8, local_size_y = 8, local_size_z = 8) in; void main() { ivec3 sampleCoord = gl_GlobalInvocationID.xyz; imageStore(pong, imageLoad(ping,sampleCoord)); } Reading values from pong shows that it's just a copy, as intended. However, when I load data from ping with an offset: #version 430 layout (location = 0, rgba16f) uniform image3D ping; layout (location = 1, rgba16f) uniform image3D pong; layout (local_size_x = 8, local_size_y = 8, local_size_z = 8) in; void main() { ivec3 sampleCoord = gl_GlobalInvocationID.xyz; imageStore(pong, imageLoad(ping,sampleCoord+ivec3(1,0,0))); } The data that is written to pong seems to depend on the order of execution of the threads within the work groups, which makes no sense to me. When reading from the pong texture, visible flickering occurs in some spots on the texture. What am I doing wrong here?

  Read the article

• Blocking IP Range in .htaccess Problem

  - by Pedro

  Hi, I'm trying to block the access of one of my webapps using IP Filter in the .htaccess, the problem is that after updating the file with: order allow,deny deny from 58.14.0.0/15 allow from all I get the folowing error: Internal Server Error The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. What is wrong? Regards, Pedro

  Read the article

• Two subnets on one switch with no VLAN and possible problems

  - by casey_miller

  As far as I know in order to use two subnets on one physical cable VLAN's are recommended. However, is it possible to achieve this (i.e: two subnets on one physical network) like 192.168.1.0/24 and 10.0.0.0/8 networks. What kind of problems or hidden rocks this way contains? With VLAN's it's possible to better isolate so users wouldn't easly sniff the other network. But in my environment it's okay if user on one subnet could listen to the traffic on another network. Is it the only problem?

  Read the article

• How do I restore a database on a remote SQL server 2005 from a local backup?

  - by MatsT

  I have been given access to (parts of) a remote SQL Server 2005 with SQL Server authentication in order to be able to make changes to a database without involving other people who is not working on the project. The database have been created on my local machine. Is there any way to restore the remote database from a backup file on my local computer? I do not currently have access to the filesystem on the remote server. EDIT: To clarify, the access I have is that i can log in to the server via the SQL Server Management Studio. I have one connection to my local database server and one connection to the remote server. What I basically want to do is copy the database from one connection to the other.

  Read the article

• How do I restore a database on a remote SQL server 2005 from a local backup?

  - by MatsT

  I have been given access to (parts of) a remote SQL Server 2005 with SQL Server authentication in order to be able to make changes to a database without involving other people who is not working on the project. The database have been created on my local machine. Is there any way to restore the remote database from a backup file on my local computer? I do not currently have access to the filesystem on the remote server. EDIT: To clarify, the access I have is that i can log in to the server via the SQL Server Management Studio. I have one connection to my local database server and one connection to the remote server. What I basically want to do is copy the database from one connection to the other.

  Read the article

• Syncing sharepoint 2010 with outlook

  - by uruit

  Technorati Tags: Sharepoint 2010,Outlook SharePoint offers the possibility to connect to content in a Document Library directly from Outlook, edit the documents offline and then sync when connection is restored. This is very useful if we are working at home and we want to access a shared document (ex. VPN connection settings) or continue working directly on a file. Steps to configure the connection: 1. Browse online to SharePoint Document library you want to connect and click on "Connect to Outlook": (click to enlarge) 2. Click Allow to confirm: 3. In Outlook you will see the documents as outlook email items with the ability to preview them. When a document is updated, Outlook will notify you that you have items unread. If you want to edit a file, the corresponding office tool (Word, Excel, PowerPoint) will ask if you want to update the server after saving a change, it is really straightforward. (click to enlarge) 4. Finally, I recommend to add the IP address of your SharePoint server in the secure sites in order to prevent Outlook to ask for your windows credentials every time you open Outlook: (click to enlarge) Outlook is a great tool, letting you work in a really integrated way, don't miss this amazing feature. This feature is also available in SharePoint Online :)   Post by: Marcelo Martinez UruIT (www.uruit.com/sharepoint_outsourcing.html) Leaders in Nearshore Outsourcing from South America

  Read the article

• Apache ProxyPass ignore static files

  - by virtualeyes

  Having an issue with Apache front server connecting to a Jetty application server. I thought that ProxyPass ! in a location block was supposed to NOT pass on processing to the application server, but for some reason that is not happening in my case, Jetty shows a 404 on the missing statics (js, css, etc.) Here's my Apache (v 2.4, BTW) virtual host block: DocumentRoot /path/to/foo ServerName foo.com ServerAdmin [email protected] RewriteEngine On <Directory /path/to/foo> AllowOverride None Require all granted </Directory> ProxyRequests Off ProxyVia Off ProxyPreserveHost On <Proxy *> AddDefaultCharset off Order deny,allow Allow from all </Proxy> # don't pass through requests for statics (image,js,css, etc.) <Location /static/> ProxyPass ! </Location> <Location /> ProxyPass http://localhost:8081/ ProxyPassReverse http://localhost:8081/ SetEnv proxy-sendchunks 1 </Location>

  Read the article

• Upgrade won't allow second display to go to 1920x1080

  - by Rick

  I just upgraded to 10.10 last night and I'm having issues now with dual display from my laptop dock. This was working in the previous release with a manual xrandr command: xrandr --output LVDS1 --off --output DP1 --mode 1920x1080 && xrandr --output VGA1 --mode 1920x1080 --left-of DP1 When I run this now, the DP1 output doesn't have a mode for 1920x1080. The two displays are a matched pair of dell 22" that are both 1920x1080. When I attempt to manually add the mode xrandr --addmode DP1 1920x1080 and rerun my command, I lose both displays altogether. I have to then blindly reset to just one of them in order to get display back. If I avoid the 1920 and just attempt to setup DP1 at the 1280x1024 max it thinks it has, then the second display will come up, but obviously looks horrible since it's non-native resolution. I've grabbed the updated xorg intel driver from the stable X ppa and am running: 2:2.13.901-2ubuntu2~xup~maverick xrandr output Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 VGA1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 LVDS1 connected (normal left inverted right x axis y axis) 1280x800 60.2 + 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI1 disconnected (normal left inverted right x axis y axis) DP1 connected (normal left inverted right x axis y axis) 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1

  Read the article

• htaccess IP blocking with custom 403 Error not working

  - by mrc0der

  I'm trying to block everyone but 1 IP address from my site on a server running apache & centos. My setup is follows the example below. My server: `http://www.myserver.com/` My .htaccess file <limit GET> order deny,allow deny from all allow from 176.219.192.141 </limit> ErrorDocument 403 http://www.google.com ErrorDocument 404 http://www.google.com When I visit http://www.myserver.com/ from an invalid IP, it gives me a generic 403 error. When I visit http://www.myserver.com/page-does-not-exist/ it redirects me correctly to http://www.google.com but I can't figure out why the 403 error doesn't redirect me too. Anyone have any ideas?

  Read the article

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >