Search Results

Search found 15879 results on 636 pages for 'team building'.

Page 340/636 | < Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >

• Windows Firewall: How to allow traffic on port 8080?

  - by Chadworthington

  I am trying to configure team Foundation Server so that 1) it is accessible from within my Home Network 2) and then make the Web site access accessible via the Internet I have a problem with point 1: When I access http://192.168.1.106:8080/tfs/web/ locally from 192.168.1.106, it works. When I access the same web site from another PC in my home network, the abive URL works only if I turn of the Firewall on 192.168.1.106. Can someone please tell me specifically how to allow traffic on port 8080 without turning off Windows Firewall? It seems that the exceptions that I specify are intended for listing programs on the box that need to communicate out. Is IIS the program that I need to make the exception? How do I specify that port 8080 traffic should be allowed for web site traffic on this port? I hope to have success with pt. 2 later but I figure (1) should be done first. I expect issues.

  Read the article

• MediaPortal crash when scanning my TV Channels

  - by Martin Ongtangco

  Hello, I tried installing MediaPortal (http://www.team-mediaportal.com) on my old system. I installed & tried both beta & stable releases: Here's the old system specs: Windows XP SP3; 512mb DDR; 80GB IDE; K-World PVR-TV7131 Analog TV-Tuner; Inno3d FX5500 128mb 64bit; When scanning through the TV-Server, it crashes. I don't know if the incompatibility comes from the hardware or the OS, but my TV Tuner's own Media center app works well. For now, that's what im using. Anyone here familiar with MediaPortal? Thanks!

  Read the article

• Is there anyway to build a raid system without all drives?

  - by xenoterracide

  I'm building a raid1 (ok it will probably be a raid10,f2 but the difference with 2 drives... isn't much) system with 2 1TB drives. However, 1 of the drives I've ordered is bad so I'm RMA-ing it. I'm wondering if I could partition and install to the 1 drive and then rebuild the array when I get the second drive (after I test it of course) My initial investigation doesn't show me a way of creating the array without specifying all devices... and the device the second drive will be is one that has data that I will need to migrate (plus it's not big enough). Is it possible that I could create an array without specifying all devices? or specify false ones and reconfigure to the right ones later? Or some other method I'm not thinking of.

  Read the article

• Commercial version of Freenet6

  - by grnbeagle

  I've been using Freenet6 from gogoNET to make my mobile device publicly accessible via IPv6. It works quite well except that the service is not as stable because it's non-commercial usage only as their servers are hosted for free by different operators around the world. Apparently gogoNET sells hardware called gogoSERVER which allows one to build a service similar to Freenet6. I've inquired their sales team, but they were unable to tell me which companies have a commercial, production-quality implementation of Freenet6. Specifically I'm looking for the following features in IPv6 service provider: Client-based IPv6 connectivity for mobile devices: gogoCLIENT (gw6c) is ideal for mobile devices since it allows a device to go online regardless of the device's location. API for account maintenance: so that we can create device accounts from our software Static IPv6 address: (or maybe I mean IPv4 address) by this I mean, just like gogoNET6 service (username.broker.freenet6.net), we want to provide our users with a permanent URL for their device Any info on commercial IPv6 service provider utilizing gogoSERVER is appreciated. Thanks.

  Read the article

• mysql connection is slow (5seconds)

  - by acidzombie24

  After building my webapp on a first boot i create 2 connections to mysql on debian then 1-2 (r/w) for every page after that. The connection consistently take 5.2 seconds to connect. Debian is in a VM running in my OS. Why is the connection taking this long? At times it will take < 0.1 seconds which is great but 5.2 x2-3 on every run is to much. Has anyone experience this problem? how do i solve it? note: I am using .NET to connect. Not that it matters. and its mysql v5

  Read the article

• Clear scr does not work

  - by idea_

  I haven't been able to use the "clear scr" command in a while, as I get the following error: root@server:~# clear The program 'clear' is currently not installed. You can install it by typing: apt-get install ncurses-bin bash: clear: command not found root@server:~# apt-get install ncurses-bin Reading package lists... Done Building dependency tree Reading state information... Done ncurses-bin is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I'm using Ubuntu Server 9.10. I did some development with the ncurses library a while ago, so I've no doubt broken something.

  Read the article

• How to make a DHCP server on virtual machine serves other virtual machines(on different physical machines)?

  - by Tony

  I'm building a virtual cluster with VirtualBox and Opensuse. I have 10 physical machines and need several vms on each. The virtual machines are supposed to be in a "private" network, but still have internet access. I was asked to set up a virtual head node working as DHCP server. I installed DHCP server on the virtual head node and it seems works. On VirtualBox I set 2 network adapters to the head node, one bridged adapter and one internal network. One vm on the same physical machine has been set nic as internal network adapter. The vm can get IP address (so DHCP works) but can't access internet. What should I do? Specifically, what network adapter should I choose for head-node and work-nodes in VirtualBox? What in the virtual machines should I do?

  Read the article

• rsync to EC2: Identity file not accessible

  - by Richard

  I'm trying to rsync a file over to my EC2 instance: rsync -Paz --rsh "ssh -i ~/.ssh/myfile.pem" --rsync-path "sudo rsync" file.pdf [email protected]:/home/ubuntu/ This gives the following error message: Warning: Identity file ~/.ssh/myfile.pem not accessible: No such file or directory. [email protected]'s password: The pem file is definitely located at the path ~/.ssh/myfile.pem, though: vi ~/.ssh/myfile.pem shows me the file. If I remove the remote path from the very end of the rsync command: rsync -Paz --rsh "ssh -i ~/.ssh/myfile.pem" --rsync-path "sudo rsync" file.pdf [email protected] Then the command appears to work... building file list ... 1 file to consider file.pdf 41985 100% 8.79MB/s 0:00:00 (xfer#1, to-check=0/1) sent 41795 bytes received 42 bytes 83674.00 bytes/sec total size is 41985 speedup is 1.00 ...but when I go to the remote server, nothing has actually been transferred. What am I doing wrong?

  Read the article

• can't install sun jdk on ubuntu karmic 9.10

  - by pstanton

  i've just started using a new ec2 install of ubuntu karmic 9.10 and my first task was to install the jdk. when running apt-get install sun-java6-jdk i get the following: Reading package lists... Done Building dependency tree Reading state information... Done Package sun-java6-jdk is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package sun-java6-jdk has no installation candidate i've tried apt-get update as well as adding deb http://us.archive.ubuntu.com/ubuntu/ karmic universe to /etc/apt/sources.list any ideas fellas?

  Read the article

• AFXR problem using gradwell secondary DNS

  - by Roaders

  Hi All I use Gradwell.com to provide secondary DNS but I keep getting e-mails along the lines of the following saying that it's not working: You have asked us to provide a secondary DNS service for the following domain(s) Unfortunately, the primary DNS server(s) you specified are not permitting the necessary zone transfers from our servers, or they are not answering "SOA" queries for your domain correctly. I have gone through the support procedure and they weren't that helpful. They have suggested the following: Our secondline team have suggested setting the AXFR to use anouther machine. This will ensure that the transfer is not locked down to one machine and should allow any machine to make the request I don't really know what AFXR is and I only have 1 production machine so I can't set the AFXR to use another one! In previous support correspondence we confirmed that I am allowing transfers to the correct IP and that I have the correct ports open on the firewall. I am running Windows Server 2003. What can I do to try and get these zone transfers working? Thanks

  Read the article

• Installing PHP-GTK with PHP 5.3 on OS X

  - by Shabbyrobe

  I'm having trouble getting php-gtk installed with php 5.3 on os x. I'm currently using macports to do it and when I try to install php-gtk, it spews 'duplicate static' errors: Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_php_php5-gtk/work/php-gtk-2.0.1" && /usr/bin/make -j2 all " returned error 2 Command output: ext/gtk+/gen_pango.c:2951: error: duplicate 'static' ext/gtk+/gen_pango.c:2957: error: duplicate 'static' ext/gtk+/gen_pango.c:3097: error: duplicate 'static' ext/gtk+/gen_pango.c:3103: error: duplicate 'static' Is there a way to coerce it into building, or an alternative way to install it?

  Read the article

• Suppress log messages about 3ware disk temperature changes on CentOS?

  - by Stefan Lasiewski

  I have a number of CentOS 5 servers which use 3ware RAID controllers. These servers are bugging my team with messages about minor temperature changes, like this: Jun 8 12:32:39 HOST smartd[1231]: Device: /dev/twa0 [3ware_disk_01], SMART Usage Attribute: 194 Temperature_Celsius changed from 119 to 118 Jun 8 12:32:39 HOST smartd[1231]: Device: /dev/twa0 [3ware_disk_03], SMART Usage Attribute: 194 Temperature_Celsius changed from 122 to 121 How can I suppress these messages? According to man smartd.conf : To disable any of the 3 reports, set the corresponding limit to 0. Trailing zero arguments may be omitted. By default, all temperature reports are disabled (´-W 0´). On my systems, smartd is reporting about temperature changes by default. I tried a manual approach. In /etc/smartd.conf, I have the following: /dev/twa0 -d 3ware,1 -a -W 0 /dev/twa0 -d 3ware,3 -a -W 0 But this still does not suppress the messages. Since these messages show up in /var/log/messages, LogWatch is sending unnecessary emails every night.

  Read the article

• Touchpad stops working when plugging in new laptop PSU

  - by drahcir

  I recently bought a psu for my Compaq 6710b and when I plug it in to the laptop the touchpad seems to go stop working, especially when the laptop is charging. I checkout this site and it suggests that the problem might be static electricity building up due to poor earthing.I tried replacing the cable that leads from the psu to the wall socket with the one I had of my old psu but to no avail. I even tried to see if I put the psu farther away might reduce to interference but also resulted in failure. Any ideas on how I could solve this problem?

  Read the article

• Is there a usable HTML web gallery template for Lightroom 2?

  - by Johannes Rössel

  The built-in HTML gallery unfortunately generates invalid HTML markup so its looks are likely more coincidence than proper design. That aside its JavaScript usage prevents using the middle mouse button to open an image in a new tab. A look at the few free HTML gallery templates out there shows me that there seems to be little interest in building an actual HTML gallery which doesn't use JavaScript. Most of them are using JS to build fancy animations or in-page popup boxes containing the image. This may be nice for some people but at least one person who looks at my images is on dial-up and quickly opening all images in individual tabs to let them load and then close the connection is very nice to have there. Anyone seen such a gallery template; i. e. simple, plain HTML without JS? My HTML/CSS skills aren't that good that I can develop such a thing on my own, unfortunately.

  Read the article

• Disk / system configuration for log collection / syslog server

  - by Konrads

  I am looking into building a syslog / logging infrastructure and am pondering about some architecture best practices. Essentially, I see that a syslog system needs to support two conflicting workloads: log collection. Potentially massive streams of data need to be written quickly to disks and indexed. log querying. logs will be queried by both fixed fields such as date and source as well as text search. What is the best disk/system setup assuming I'd like to keep it to a single server for now? Should I use SSDs or ramdisk to off-load some processing? some disks in stripe and some in raid5? I am particularly eyeing Graylog2 with ElasticSearch/MongoDB

  Read the article

• Intel Server Board S3420GP fails to boot with video connected

  - by Riley

  All, Building a new system using an Intel Server Board S3420GP motherboard and an Intel Xeon X3440 processor. Before installing this motherboard into the chassis we want to test that it will actually boot correctly. We have mounted the processor and RAM with no hard drives attached. The boot sequence differs between the next variable: 1) Connecting video results in the system fans ramp up and down, twice, and then the system beeps with the same behavior repeating; the system status light shows "Amber" 2) With no video, the system goes through POST and the diag LEDs show that the system is missing a bootable device Need some assistance identifying why the board would fail to POST with video connected. // Update // Using another Power Supply the system gets passed the fans ramping up and down twice. Video still does not display.

  Read the article

• Optimizing wireless router speed and minimizing interference.

  - by Tchalvak

  I've been experiencing problems with my wireless connectivity lately, and want to make sure that it's not related to the abundance of other wireless routers here in my building. So, what I'm looking for is a method (probably via some application or another) to audit the wireless channels (and other factors that might be important that I don't even know of yet) that are floating through the aether around me. Ubuntu or other linux apps are preferred, but some kind of windows/mac solution is possible, since I do have other OSes around me that I could install & test on. Router: netgear WGT624 v3 Hearsay tells me that channels 1, 6, and 11 are "non-overlapping" (I expect they aren't used for non-wireless-router purposes or something, not sure how they couldn't overlap with other routers using other channels), so perhaps my best choices of channel are limited, so if channels aren't really a big concern, I'd be happy to get links to other optimizations that I should look into.

  Read the article

• Are Plesk server backups useful?

  - by Michael T. Smith

  I'm working for a startup now, and I'm the programmer. Because of our small team size, I'm also handling the server management for now (until we get a dedicated server administrator.) I've never used Plesk before, and the server we're using (a Media Temple Dedicated Virtual server) had it installed when I got here. One of my first jobs was to set up backups: Plesk was already running it's nightly server-wide backups. I created a small script to dump the web app, it's DBs and any assets, tar them, store them, and then copy them to another small server we have (to backup the backups.) But, we're constantly running into hard drive space issues because of the Plesk backups. And I'm wondering, are they useful? If I have the web app and all of it's assets, I could easily enough get another server up and running. Do we need to keep running Plesk's backups? Thoughts?

  Read the article

• How can I share a video file during a webinar?

  - by Brien Malone

  Here is the scenario: I have a number of remote employees around the globe. I want to have a video chatting session. No problem there. Halfway through, I want to shut off all camera video feeds and simulcast (synchronous) a training video to my team. How do I do this? We have tried office communicator, but the frame rate was awful and no audio. Adobe Connect had similar trouble. In both cases we were limited by the main office's small internet pipe, but it is clear that video delivered by shared desktop is not a good solution.

  Read the article

• How do I give MacPorts privileges?

  - by cojadate

  I tried to install PostgreSQL server development libraries using MacPorts and got the following: Warning: MacPorts running without privileges. You may be unable to complete certain actions (e.g. install). ---> Computing dependencies for postgresql-server-devel ---> Dependencies to be installed: postgresql-devel ---> Building postgresql-devel Error: Target org.macports.build returned: shell command failed Error: The following dependencies failed to build: postgresql-devel Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> So I guess that means I need to running MacPorts with privileges and try again. Unfortunately I've no idea how to give MacPorts privileges. I'm running OS X 10.6.3

  Read the article

• Roughly cutting Fibre Cables

  - by Bryan

  I recently asked a question about which type of Fibre optic cable to use for my installation. We have now found a cable type and supplier and I'm about to order the cable (OM3, Tight Buffered, 12 Core), however I have a further question: We are shortly moving in to a new building (still being constructed) and we are about to get a window in which we will be able to run any cabling that we need. How should I roughly cut the fibre? Can I just use some heavy shears to cut through the cable? I'm aware that doing so will damage the ends, but will the damage be limited to the ends, or could the cracks/fractures continue up the length of the cable? p.s. I have already allowed for several metres of extra cable at each end, and I am going to get a specialist in to terminate the fibres.

  Read the article

• Who to run Marcomedia Projector executables on Windows 7?

  - by shinjin

  When I try to use an old app created using Macromedia Projector in Windows 7, it crashes after the first few screens. The same programs works fine on XP. I receive this error message after a few screens: Error A Fatal Error has occurred. Click OK to Quit. Pressing OK brings me a fresh one: Microsoft Visual C++ runtime Library This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. And finally I get a Macromedia Projector has stopped working message. I have already tried adjusting compatibility mode, or adding this program to the Data Execution Prevention exceptions, but none helped.

  Read the article

• Eclipse: would more CPU cores with HyperThreading help increase speed?

  - by Dylan

  I'm programming a very large project in Eclipse. Right now I use a dual core machine with 2GB RAM, but Eclipse is sometimes busy for minutes (refreshing/indexing/building), so I'm upgrading to a new machine (with 16GB RAM and an SSD). Now I must choose between an Intel 2500K or an Intel 2600K that has HyperThreading. The price difference is about $100. Would that be worth it, for Eclipse, or is more memory/faster drive much more important for Eclipse ? Can Eclipse make use of the HyperThreading at all?

  Read the article

• redirect all youtube video requests to a specific one

  - by iTayb

  I'm on an IT team in my company and I would like to block youtube to users. I don't want to just deny access to the whole youtube domain, but only to replace the .flv/.mp4 request with the one that I want. That way, if someone tries to watch youtube videos on the network, He'll get a video of why using our expensive bandwidth for pleasure is a no-no. I thought about using a packet manipulation program and just replace the video ID with something that I want, but I didn't manage to do it right.

  Read the article

• Is there any viable alternative to using a linux/unix/BSD firewall/router/vpn?

  - by ObligatoryMoniker

  I am trying to purchase something to replace our Vyatta router that is running in a virtual machine on Hyper V (having the whole network go down when the host has to reboot is not convenient and I am getting the sense that this configuration may not be stable). Most posts on this topic suggest using Linux/OpenBSD/FreeBSD/etc with some recommendations to use appliances from vendors for specific purposes like firewall and VPN. We are a windows shop and it has been a stretch for us to make use of Vyatta but since it was free and straightforward to use we decided to use it. Now we need something that is easier for our team to (re)deploy and manage. I would rather purchase something windows based or an appliance that can do all of the following things: DHCP server (reservations, specified gateway, dns, etc) Static Routes that route traffic across three interfaces Easily Reproducible (Powershell script, Puppet, Chef, etc) Intuitive interface (Decent web interface would be fine but I don't want them to have to go to CLI) Does any one have any recommendations on what I should be looking at that might meet our needs?

  Read the article

< Previous Page | 336 337 338 339 340 341 342 343 344 345 346 347  | Next Page >