Search Results

Search found 42453 results on 1699 pages for 'my question'.

Page 341/1699 | < Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348  | Next Page >

• Unexpected(?) high 'wasted' memory in memcached

  - by Nanne

  Looking at our memcached stats I think I have found an issue I was not aware of before. It seems that we have a strangely high amount of wasted space. I checked with phpmemcacheadmin for a change, and found this image staring at me: Now I was under the impression that the worst-case scenario would be that there is 50% waste, although I am the first to admit not knowing all the details. I have read - amongst others- this page which is indeed somewhat old, but so is our version of memcached. I think I do understand how the system works (e.g.) I believe, but I have a hard time understanding how we could get to 76% wasted space. The eviction rate that phpmemcacheadmin shows is 2 ev/s, so there is some problem here. The primary question is: what can I do to fix this. I could throw more memory at it (there is some extra available I think), maybe I should fiddle with the slab config (is that even possible with this version?), maybe there are other options? Upgrading the memcached version is not a quickly available option. The secondairy question, out of curiosity, is of course if the rate of 75% (and rising) wasted space is expected, and if so, why. System: This is currently not something I can do anything about, I know the memcached version isn't the newest, but these are the cards I've been dealt. Memcached 1.4.5 Apache 2.2.17 PHP 5.3.5

  Read the article

• Apache Bench reports different result with same page

  - by Aspis

  I'm running into a little problem base-lining an Apache2/fcgi/php-fpm server I am setting up. 1) If I run: ab -n 15000 http://mysite.com/index.php. Apache Bench returns Time per request: 41ms but document length: 0 bytes and html transferred: 0 bytes. The Transfer rate: 7.9Kb/s. 2) If I run: ab -n 15000 http://mysite.com/ Apache Bench returns Time per request: 83ms along with the accurate document length and html transferred total. The APC cache status reports identical hit counts from both test. Also Apache Bench reports no errors in either case. Overall, no errors on any test sites and all logs are clean, etc. DocumentRoot is set to index.php so I would expect both of these test runs to produced a similar result. My 2 question(s) are: 1) why the discrepancy? 2) which is the correct result? I've seen plenty of results like test 1 posted (with out question) but frankly from my own experience and those of others, accurate testing is hard to come by. Even with out goofy issues like this.

  Read the article

• How ZFS handles online replacement in a RAID-Z (theoretical)

  - by Kevin

  This is a somewhat theoretical question about ZFS and RAID-Z. I'll use a three disk single-parity array as an example for clarity, but the problem can be extended to any number of disks and any parity. Suppose we have disks A, B, and C in the pool, and that it is clean. Suppose now that we physically add disk D with the intention of replacing disk C, and that disk C is still functioning correctly and is only being replaced out of preventive maintenance. Some admins might just yank C and install D, which is a little more organized as devices need not change IDs - however this does leave the array degraded temporarily and so for this example suppose we install D without offlining or removing C. Solaris docs indicate that we can replace a disk without first offlining it, using a command such as: zpool replace pool C D This should cause a resilvering onto D. Let us say that resilvering proceeds "downwards" along a "cursor." (I don't know the actual terminology used in the internal implementation.) Suppose now that midways through the resilvering, disk A fails. In theory, this should be recoverable, as above the cursor B and D contain sufficient parity and below the cursor B and C contain sufficient parity. However, whether or not this is actually recoverable depnds upon internal design decisions in ZFS which I am not aware of (and which the manual doesn't say in certain terms). If ZFS continues to send writes to C below the cursor, then we are fine. If, however, ZFS internally treats C as though it were gone, resilvering D only from parity between A and B and only writing A and B below the cursor, then we're toast. Some experimenting could answer this question but I was hoping maybe someone on here already knows which way ZFS handles this situation. Thank you in advance for any insight!

  Read the article

• Http header 304 and caching?

  - by Royi Namir

  Our company uses these settings( don't ask me why) - for every request they want a new request from server. this is an intranet system which uses only IE. They defined it in : We also have windows authentication NTLM in the iis7. I have 2 questions please. Question #1) when the browser make a request ( css ) : (leave the 401 response for now - this is how ntlm works) He is requesting it with if-modified-since header. why is he adding this header ? How can I configure it ? why doesn't he use the settings from IE and try to download it each time - as I showed in the first picture ? Question #2) The response ( after ntlm negotiation) for that was : Response with Not-modified which is 304 header. and I assume its because we sent the request with the if-modified-since header. But there is a problem. He is actually tells me to download from my cache. But I told him explicitly in the IE settings - not to load from cache. Wham am I missing here ? Thanks a lot.

  Read the article

• Why do disk images hosted on a read-only HFS+ partition behave differently?

  - by deceze

  I have come across the following phenomenon and would like to know how leaky Windows' file system abstraction is or if there's something else involved. I partitioned the hard disk of my MacBook Pro and installed Windows 7 (64 bit). The Boot Camp driver package includes file system drivers that enable Windows to access the Mac OS HFS+ partition. It's read-only access, but it works. Now, I have some disk images of stuff I usually install, so I grabbed a copy of Daemon Tools to mount them. When I mount an image saved on the HFS+ partition, about two out of three installers on these disks (usually InstallShield) crash with all sorts of weird errors. Most are just gibberish that lead to all sorts of non-solutions on Google, one was "This application is not the right type for your computer, check if you need 32 or 64 bit versions." When moving the image files to another Windows 7 computer on the network and mounting them from the network share, they work fine. My question now is, why do applications behave differently depending on whether the read-only image file, which should be abstracted away through the read-only virtual Daemon Tools drive, is located on a read-only HFS+ partition or on a Windows network share? And I'll just roll this into the question as well since I was wondering: Does the file system of a network share matter? Does the client system need to understand the file system of the share host or is that abstracted away in SMB?

  Read the article

• Equivalent of scp -l bandwidth_cap for .ssh/config?

  - by Mark Bennett

  Short form: You can limit the bandwidth the scp uses with the -l switch, you pass a number that's in kbits/sec. I'd rather set this in my .ssh/config file for certain names machines. What's the equivalent named setting for -l ? I haven't been able to find it. Followup question: Generally, not sure how to map back and forth between ssh command line options and config names, short of doing Google searches or manually comparing man pages on a case by case basis. Is there a table that directly equates the two? Longer form of first question, with context: I've started using ssh config quite a bit, especially now that I need to go through a proxy and do lots of port mappings. I even define the same machine more than once depending on what type of tunneling I need. However, when uploading a large file, it's difficult to do anything else on my machine. Even though I have more download bandwidth than up, I think that scp saturates the link so even my small requests can't reach the Internet. There's a fix for this, using the -l bandwidth command line switch for scp. scp -l 1000 bigfile.zip titan: I'd like to use this in my config instead, so I'd create an additional named entry called "titan-upload" and I'd use that as the target whenever I upload. So instead of: scp bigfile.zip titan: I'd say: scp bigfile.zip titan-upload Or even set different caps depending on where I am: scp bigfile.zip titan-upload-from-home vs. scp bigfile.zip titan-upload-from-work I'm generally on Mac and Linux.

  Read the article

• Servers / ram for social network- how many?

  - by Marty

  I am launching my social network soon an looking into hosting. The question i am lost is: Do i need separate servers for web vs database vs image handling since there is photo sharing? Or does 1 server handle it all? Also is more ram better? If i get 50GB ram is that better than having 8 gb ram? EDIT: It is PHP codeignitor and MySQL for now. (switch to NoSQL DB later if demand calls fr it.) I will be using memcache also. Concept wise it is similar to yelp, so geographic based with lots of user content and image sharing + live feeds an privacy levels. User plan is open question. Without testing the demand for this i cant give a number. But the concept is unique, no one out there with the set of features i am releasing so it could grow. Ideally I want to plan for handling about 1-2 million views / month from launch. If it goes more than that then I will upgrade.

  Read the article

• How to get data out of a Maxtor Shared Storage II that fails to boot?

  - by Jonik

  I've got a Maxtor Shared Storage II (RAID1 mode) which has developed some hardware failure, apparently: it fails to boot properly and is unreachable via network. When powering it on, it keeps making clunking/chirping disk noise and then sort of resets itself (with a flash of orange light in the usually-green LEDs); it then repeats this as if stuck in a loop. In fact, even the power button does nothing now – the only way I can affect the device at all is to plug in or pull out the power cord! (To be clear, I've come to regard this piece of garbage (which cost about 460 €) as my worst tech purchase ever. Even before this failure I had encountered many annoyances about the drive: 1) the software to manage it is rather crappy; 2) it is way noisier that what this type of device should be; 3) when your Mac comes out of sleep, Maxtor's "EasyManage" cannot re-mount the drive automatically.) Anyway, the question at hand is how to get my data out of it? As a very concrete first step, is there a way to open this thing without breaking the plastic casing into pieces? It is far from obvious to me how to get beyond this stage; it opens a little from one end but not from the other. If I somehow got the disks out, I could try mounting the disk(s) on one of the Macs or Linux boxes I have available (although I don't know yet if I'd need some adapters for that). (NB: for the purposes of this question, never mind any warranty or replacement issues – that's secondary to recovering the data.)

  Read the article

• Pages load in brower fine, but 404 not found reported for the page during the GET on all pages except index

  - by user885983

  I believe this question is more suited to serverfault (please correct me if not). This issue appears very similar to this question (except there are no 301 Moved Permanently for any pages). The domain is yorkshirebadges.co.uk. For example, loading yorkshirebadges.co.uk or yorkshirebadges.co.uk/index.php reports no 404s during network inspection. But every other page (/contact.php, /products.php) report a not found. Mod_rewrite is being used on the site, I checked this out but didn't see any obvious errors. It's included below for reference: RewriteEngine on RewriteRule ^store/material/([^/\.]+)/price/?([^/\.]+)?$ products.php?prodType=$1&price=$2 RewriteRule ^store/price/?([^/\.]+)?$ products.php?price=$1; RewriteRule ^store/material/?([^/\.]+)?$ products.php?prodType=$1 RewriteRule ^store/([^/\.]+)/?$ products.php?prodCat=$1 RewriteRule ^store/([^/\.]+)/price/([^/\.]+)$ products.php?prodCat=$1&price=$2 RewriteRule ^store/Type/?([^/\.]+) products.php?prodType=$1 RewriteRule ^store/([^/\.]+)/?([^/\.]+)?$ view-product-details.php?cat=$1&prodName=$2 RewriteRule ^store/([^/\.]+)/material/?([^/\.]+)?$ products.php?prodCat=$1&prodType=$2 RewriteRule analytics http://www.google.com/analytics <IfModule mod_suphp.c> suPHP_ConfigPath /home/yorkshir <Files php.ini> order allow,deny deny from all </Files> </IfModule> Chrome Network Inspection (and firebug on firefox) report 404s on all pages except the index, the server is apache2. Really scratching my head on this one!

  Read the article

• Imagemagick convert with resample option

  - by coneybeare

  I am creating thumbnails from much larger images and have been using this command successfully for some time: convert FILE -resize "64x" -crop "64x64+0+16" +repage -strip OUTFILE I also do some other processing that is not relevant to the question. I realized that this does not adjust the resolution at all, so if I use a 300dpi image, it ends up displaying really small on some devices. I want to resample it to 72x72 so I have been trying with this command: convert FILE -resize "64x" -crop "64x64+0+16" +repage -strip -resample 72x72 OUTFILE And expected the 64x64 image at 300dpi to be resampled to a 64x64 image at 72dpi, but instead, I am getting a very funny size and density. Here is "identify" output for the original and post-processed file WITHOUT the resample: coneybeare $ convert "aa.jpg" -crop "64x64+0+16" +repage -strip "aa.png" coneybeare $ for image in `find . -type f`; do identify $image; identify -verbose $image | egrep "^ Resolution"; done ./aa.jpg JPEG 1130x1695 1130x1695+0+0 8-bit DirectClass 1.492MiB 0.000u 0:00.000 Resolution: 300x300 ./aa.png PNG 64x64 64x64+0+0 8-bit DirectClass 7.46KiB 0.000u 0:00.000 Resolution: 118.11x118.11 And here is the "identify output for the command WITH the resample: coneybeare $ convert "aa.jpg" -crop "64x64+0+16" +repage -strip -resample 72x72 "aa.png" coneybeare $ for image in `find . -type f`; do identify $image; identify -verbose $image | egrep "^ Resolution"; done ./aa.jpg JPEG 1130x1695 1130x1695+0+0 8-bit DirectClass 1.492MiB 0.000u 0:00.000 Resolution: 300x300 ./aa.png PNG 15x15 15x15+0+0 8-bit DirectClass 901b 0.000u 0:00.000 Resolution: 28.34x28.34 So, the question is: What am I doing wrong and how can I fix it so the end result is a 64x64 cropped thumbnail image at 72dpi?

  Read the article

• TortoiseSVN client slows Explorer to a crawl in Windows XP running in Parallels

  - by Cory Larson

  I thought I'd make my first SuperUser question relatively simple, though it's the kind of question that may not get many responses as I'm not directly involved with the issue. A colleague does his development in Windows XP running in Parallels on his Mac. We've just migrated our VSS repository to SVN, and we've gone with TortoiseSVN as our client of choice with the Ankhsvn plugin for Visual Studio. On his XP instance, after installing TortoiseSVN, browsing through folders using Explorer is extremely slow; about 15 - 30 seconds before the contents of the next folder displays. It's the slowest when opening My Computer. Once he reaches a folder that contains the working content of an SVN project, Explorer behaves quickly again as expected. It seems that TortoiseSVN may be spending a bunch of time searching subfolders for stuff so it can do its icon-overlay thing, but that's just a guess. I've used TortoiseSVN for years on both XP and Vista on far less powerful machines without any issues with Explorer, so I'm attributing the slowness to it being run in a VM, though that may not be the actual issue. So has anyone encountered similar performance issues, and/or know of a fix? Keep in mind that any requests to make changes to his configuration will need to be communicated and thus my response time might be slow. Thanks everyone!

  Read the article

• When a server IP changes, do exising TCP (e.g. http/mysql) connections remain running

  - by Luke Cousins

  We have some PHP-FPM servers and when they need a database connection, they connect to an HAProxy server which selects them a database server to use and the connection opens. When we then want to perform some maintenance on the HAProxy servers (such as config changes requiring an HAProxy restart), the process is as follows: Shutdown Keepalived on the HAProxy server Wait for the floating IP to transfer to the backup HAProxy server (also running Keepalived) Wait until HAProxy stats is reporting just one connection (us checking how many connections there are) Restart HAProxy Restart Keepalived As step 2 occurs, what will happen to the open mysql connections at that point? According to this TCP Sessions and IP Changes question the connections will be dropped. Is this really the case? If so, what, if anything, can be done to prevent this happening? Can the connection be in some way forced to use the main (non-floating) IP of the server? We also have a similar setup with two Nginx servers with Keepalived running on them and we were planning on doing the equivalent process. If we do, the same question applies - what happens to the existing http connections when the IP moves to the other server? I appreciate your help.

  Read the article

• Application Virtualization

  - by Peter Versnee

  I have been looking for a solution to virtualize my desktop application as a SaaS. After picking Citrix XenApp as the best solution for my case and trying for ever to get it to work (with some more experienced people) I can't help but to conclude that Citrix has too much problems for my case. Every time I fix one thing some other thing pops up. As I can't imagine Citrix XenApp is the only way to deliver my application to my clients, I'd like to ask you experienced guys if you think there is an other way to deliver it whilst meeting my requirements. I've got no money issues - time on the other hand... My requirements: My application must run on a windows server; The application should be virtualized with the application window only (no desktop); Content Redirection (my application is the only one virtualized, so PDF, DOC(X) etc. is on the users' system); Easy user management; SSO;* Cross platform (Windows, Linux, Mac OSX).* I truly hope I don't annoy you with another of the same question. I've tried to find the same question here and - obviously - didn't found it. *) these I can live without, however very much appreciated

  Read the article

• Random and Selective ARP blindness in VMWare ESXi 4.1

  - by Peter Grace

  We have multiple VMWare ESX servers spread out amongst our company, doing various tasks. One particular ESXi host is exhibiting very peculiar behavior. We detect it when our monitoring system (Orion) notifies us that it can no longer ping the box. Upon jumping on the local console of the guest in question, we see that it cannot ping any new addresses that aren't already in its ARP table. At first we thought that the problem was just related to one of our guests, as the problem seemed to always happen to another guest, DevRedis. However, this afternoon the problem swapped and started happening on ApacheBox rather than DevRedis. When I have been fortunate to catch the problem, I have run tcpdump on both sides of the connection (one side being vmware, the other side being a physical webserver) and have noticed the following course of events: Guest ApacheBox sends an ARP request for the physical address of server WindowsBeast WindowsBeast tenders an ARP is-at back to the network indicating its physical mac address. ApacheBox never sees the ARP is-at response. The ESX host in question is running VMware ESXi, 4.1.0, 348481 The two guests (DevRedis and ApacheBox) are both running CentOS 6.3, however they are running two separate kernel versions ( 2.6.32-279.9.1.el6.x86_64 and 2.6.32-279.el6.x86_64 ) so I'm not entirely sure it's a CentOS problem. Does anyone have any thoughts on what might cause this? Has anyone run into it before?

  Read the article

• How do you set up CRON?

  - by user1723760

  I have never used CRON before but I want to use CRON in order to be able to perform schedule jobs for a php script. The php script is called "inactivesession.php" and in the php script is this code: <?php include('connect.php'); $createDate = mktime(0,0,0,10,25,date("Y")); $selectedDate = date('d-m-Y', ($createDate)); $sql = "UPDATE Session SET Active = ? WHERE DATE_FORMAT(SessionDate,'%Y-%m-%d' ) <= ?"; $update = $mysqli->prepare($sql); $update->bind_param("is", 0, $selectedDate); $update->execute(); ?> Wht I want to do is that when the above date is reached (25th Oct), I want the php script to perform the UPDATE statement above. But my question is that how do I use CRON in order to do this? The server I am using is the university's server known as helios, does CRON need to be set up in helios, (do I have to call the admin for this) or is it something else which uses CRON. I have never used CRON before so can you explain to me how CRON can be set up for the example above with the server I am using? Thanks UPDATE: Hi, I think the name of the OS is actually helios but I am not sure, I have a wikipedia page on this: here. I will read the crontab wikipedia page and see what I can find, but what my question is that is CRON already set up, do I just go right ahead and use CRON or do I need to set it up first?

  Read the article

• Why can't I mount an image hosted on a read-only HFS+ partition via Boot Camp?

  - by deceze

  I have come across the following phenomenon and would like to know how leaky Windows' file system abstraction is or if there's something else involved. I partitioned the hard disk of my MacBook Pro and installed Windows 7 (64 bit). The Boot Camp driver package includes file system drivers that enable Windows to access the Mac OS HFS+ partition. It's read-only access, but it works. Now, I have some disk images of stuff I usually install, so I grabbed a copy of Daemon Tools to mount them. When I mount an image saved on the HFS+ partition, about two out of three installers on these disks (usually InstallShield) crash with all sorts of weird errors. Most are just gibberish that lead to all sorts of non-solutions on Google, one was "This application is not the right type for your computer, check if you need 32 or 64 bit versions." When moving the image files to another Windows 7 computer on the network and mounting them from the network share, they work fine. My question now is, why do applications behave differently depending on whether the read-only image file, which should be abstracted away through the read-only virtual Daemon Tools drive, is located on a read-only HFS+ partition or on a Windows network share? And I'll just roll this into the question as well since I was wondering: Does the file system of a network share matter? Does the client system need to understand the file system of the share host or is that abstracted away in SMB?

  Read the article

• What is the oldest hardware still in production use? How is it kept running?

  - by sleske

  In the spirit of the question What is your oldest hardware that still works?, I'd like to ask: What is the oldest hardware you know that is still in production use? And what challenges did you (or someone else) face in keeping it running (scarce documentation, no support, no spare parts available...)? Most organizations will retire / upgrade software and hardware after 5-10 years, but sometimes old software is kept running on old boxes, because it "just works". I once worked at a client site that was running a critical piece of (in-house developed) business software on a single server running HP-UX. The server was old (ca. 12-13 years), but fortunately still running without problems; however, getting spares would have been very difficult, and since software installation was undocumented, any significant system changes or even new hardware might have caused significant downtime and data loss. We eventually managed to replace it, but this is not always possible. I also read that many organizations still run decade-old mainframe hardware, particularly for highly customized systems controlling industrial machines or power plants. Which old hardware have you encountered? How did you manage these challenges? Related question: http://serverfault.com/questions/82467/should-old-servers-be-retired

  Read the article

• Strange Behaviour with Unicode Characters in Windows

  - by open_sourse

  Ok, I do not know if this is a programming question, but it certainly is a technical one so I am asking it here. I was working on some internationalization stuff in my PHP code, and in order to ensure that my generated HTML shows up Unicode correctly based on the encoding and stuff I decided to add some Chinese text to my PHP page, which then echoes it into the browser to complete my test case. So I went into google and typed "Chinese", copied the first Chinese text that the search returned (which was ??/??). I then copied it into Notepad++ which is my editor, and to my surprise showed up as boxes similar to [][]/[][]. So I thought the encoding in Notepad++ was messed up and I changed the encoding to UTF-8 and UCS, neither worked. I did it fresh in a newly encoded file, still I got the boxes. The same content when I paste into Google and StackOverFlow (like I did in this posting) shows up correct Chinese! I even opened up Windows Clipboard Viewer and the content is represented in the Clipboard as boxes! I tried pasting it into Windows Explorer address bar and using to rename a file to, but I still get boxes. But it shows up correctly when pasted into my Chrome Browser address bar! Is this a Windows issue? Since I am able to paste it correctly in SO, the data in memory should be encoded correctly right? But if that is the case why does it show up as boxes in the Clipboard Viewer? I am confused here...By the way I am using Windows XP with SP3. (I am asking this question here, even if it is not programmatic, because it is preventing me from running my programming test cases..)

  Read the article

• DRBD stacked resources: recovering from failure

  - by Marcus Downing

  We're running a stacked four-node DRBD setup like this: A --> B | | v v C D This means three DRBD resources running across these four servers. Servers A and B are Xen hosts running VMs, while servers C and D are for backups. A is in the same datacentre as C. From server A to server C, in the first datacentre, using protocol B From server B to server D, in the second datacentre, using protocol B From server A to server B, different datacentres, stacked resource using protocol A First question: booting a stacked resource We haven't got any vital data running on this setup yet - we're still making sure it works first. This means simulating power cuts, network outages etc and seeing what steps we need to recover. When we pull the power out of server A, both resources go down; it attempts to bring them back up at next boot. However, it only succeeds at bringing up the lower-level resource, A-C. The stacked resource A-B doesn't even try to connect, presumably because it can't find the device until it's a connected primary on the lower level. So if anything goes wrong we need to manually log in and bring that resource up, then start the virtual machine on top of it. Second question: setting the primary of a stacked resource Our lower-level resources are configured so that the right one is considered primary: resource test-AC { on A { ... } on C { ... } startup { become-primary-on A; } } But I don't see any way to do the same with a stacked resource, as the following isn't a valid config: resource test-AB { stacked-on-top-of test-AC { ... } stacked-on-top-of test-BD { ... } startup { become-primary-on test-AC; } } This too means that recovering from a failure requires manual intervention. Is there no way to set the automatic primary for a stacked resource?

  Read the article

• Does a VPN requirement kill the concept of having a Web Application in the Cloud?

  - by Christian

  Recently I posted a question in SO, but so far I got no answers. I wonder if I'm asking the wrong question. This is the problem: We need to design an application which offers a public http web service, but at the same time it must consume some services through a VPN connection from other existing company. There is no other alternative but to use a VPN connection to access those services. We want to host our application in some cloud infrastructure like Heroku or Amazon EC2. But there is no direct way to access the VPN services of the other company from there. The solution I'm thinking, but I don't like is to have a different server to expose the services from that VPN. But this will require the setup of another server which I prefer to avoid. In the case this is the solution, can I use an Amazon EC2 instance to connect to a VPN? This is what I was thinking, is it correct? I don't have experience using VPNs, tunnels or those kind of networking stuff. I will really appreciate if you can propose me an alternative solution, or just give me a comment.

  Read the article

• Printing special / extended characters on web page - Firefox or printer issue?

  - by edmicman

  My dad brought this to my attention and I'm looking into it, but thought I'd post here and see if anyone has any ideas... He's running Win7, using Firefox and printing to a wireless connected Brother HL-2170W printer. He's got a web page (http://cornandsoybeandigest.com/inputs/fertilizer/applying-nitrogen-after-planting-0512/index.html) that has extended/special characters in it - the funny "a" in Fernandez. The characters show correctly in Firefox on the page. He printed it, and the extended "a" printed as a diamond with a question mark. He says it shows that way in the print preview, too. I pulled up the same page in Ubuntu, Firefox, and it displayed in my print preview and physically printed everything correctly. I just checked on my wife's Win7 PC in Firefox and the print preview looked correct on her system, too. We have a Brother 2040 here. Soooo, my question is, is this possibly a problem in the browser somehow, or the printer driver? I'm leaning towards the printer driver now, but I can't say I've run into this before. Is it a setting somewhere? I just installed this printer for him the other day, using the CD that came with it; I could try updating the driver from Brother's website I guess. Is there anything else I should look at or check? Thanks!

  Read the article

• How to connect computers to a network printer behind a router?

  - by kokbira

  General question: How to connect computers to an IP printer behind a router? Particular question: How to connect C-1 and C-2 to PRI? What? Where? [ISP] | | -> IPs:200.X.X.X/other configs:DC | [R-1] | | -> IPs:10.1.X.X locked by MAC,M:255.0.0.0,G:10.1.0.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [PRI] IP:10.1.7.7 [R-2] IP: 10.1.0.1,MAC:A | | -> IPs:192.168.1.X,M:255.255.255.0,G:192.168.1.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [C-1] IP:192.168.1.2 [C-2] IP:192.168.1.3,MAC:A Glossary and details: ------------------------------------------------------------------------------------ - IP: IP. - IPs: Some IP range. - M: Mask. - G: Gateway. - MAC:A: A MAC address that I will not inform you :) - DC: Don't care. - ISP: Internet Service Provider (not so much details about it on that case). - R-1: A real router or some concatenated so IP range bellow that block is 10.1.X.X and above is ISP. The provided IPs are provided by MAC. As all available addresses are in use, you must clone an existing one to join with a new device (and to disconnect the cloned one). - PRI: An network printer (some people here call that IP printer). - R-2: A TP-LINK TL-WR340G, mine wireless router (since my computer does not have ethernet input, it is my ethernet-wifi adapter :), admin access, MAC address cloned from C-2 (MAC:A). I've to configure 10.0.1.1 and 10.0.1.2 as DNS addresses, other wise I cannot connect C-1 and C-2 to Internet. - C-1: My computer, a CCE XLE-425 (remember: no ethernet input), with Windows 7, admin access. - C-2: another computer with better configs than mine, MAC:A, Windows XP. Requirements: I want to print, to access Internet and to do it myself (no need to call network admin men in black people). Pay attention to MAC clones and DNS info.

  Read the article

• Setting up Web server so it is easy to migrate

  - by Nyxynyx

  Hi I am about to move my site from a VPS to another host's dedicated server. One of my concern is about scaling the site in the future that involves a change of server. Now that I am starting the dedicated server from scratch with only the OS, this means that I need to install the web server stack, including Apache and its mods, PHP, MySQL, PostgreSQL, Tomcat, Solr and a few other softwares like ImageMagick and git. Question: Is there a way for me to setup this new dedicated server such that I can easily migrate the entire site, both the technology stack and the code to the a newer server (upgrade from this new dedicated server) easily without reinstalling and reconfiguring everything? The code for the website is being handled by git and github so thats not a problem. I'm more conerned about the rest of the software required. Side question: The current VPS uses CentOs with cpanel and it seems that many packages are outdated on yum and cpanel interfers with the installation of many packages. Which OS should I go with for the new server? Ubuntu?

  Read the article

• Map a URL bought with Dreamhost to Amazon EC2 (AWS)

  - by Edan Maor

  I have several URLs I purchased through Dreamhost. I'm starting to use Amazon's AWS, and I'd like to map the URLs to Amazon. This is something of a silly question, and I've already done the same thing several times to other services (mapping from Dreamhost to WebFaction). But for some reason when I tried to find the proper way to do the same mapping to Amazon, I find a lot of detailed writing talking about whether I should be using CNAME or A records, etc. So I wanted to ask in the simplest possible terms and hopefully get a simple, concrete answer: I bought a URL from Dreamhost, I have an EC2 server running on AWS (to which I already mapped an Elastic IP address). How do I make the URL map to AWS? And if there are several options, which one should I effectively be using? P.S. Meta-question - why are things so much more difficult with AWS? When I search Google for "Move from Dreamhost to WebFaction, I get very simple answers on how to do the mapping. In what way is AWS different?

  Read the article

• Office 2010 OCT Outlook Filepaths

  - by vlannoob

  I'm playing around with customizing Office 2010 installs on my network, normally I just do a full manual install, but as the environment grows and the lazier I get its becoming a pain to do it manually every time. I've read up and downloaded the Office 2010 OCT tool and it looks relatively straight forward - with one exception - the Outlook Profile. I can 'get around it' by just leaving it all as default (or not enabling offline use) but I'd like to customise it slightly so that its all setup no matter who logs onto the PC. The only issue I have, and my question is: In the OCT - Outlook section What do you enter into the Path and Filename for the OST file and the Offline Address book seetings under Enable Offline Use section? I'm sweet with everything else - just that one section, and I think if I bugger that one it will kill the whole Outlook Profile?? It would need to go into each users unique filepath for their profile correct? I have a fair idea of what should be there but I'm struggling with the correct syntax. I know this is a stupid question....but its late in the day and my brain is fried ;) As usual - any and all help/assistance is appreciated ;)

  Read the article

< Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348  | Next Page >