white screen - Page 341

Hp Pavilion dv6000 wont boot right and freezes

- by MalwareManiac

I have an hp pavilion dv6000 that was having windows issues recently including randomly freezing. I eventually concluded that the hard drive was bad (And I was correct as the bad drive started making funny noises and quit working soon after). So I replaced it with a known good drive and put windows on it and it worked for a few hours. After a few restarts startup didn't even make it to the login screen. It just stays at a lighted black screen until I restarted. After another restart it made it to windows but then froze after a few minutes. A few more restarts yielded one of these two results. Like I mentioned earlier I have a know good drive in it and I also replaced the memory that was in it with a know good stick along with running memtest with no errors. So What does that leave? a corrupted windows installation? Motherboard? CPU? Any ideas?

Read the article

Cause of laptop only booting once every 3-10 times

- by user16441

My 3-year old Asus EEE laptop has been working flawlessly in the past, but in the last week it has started behaving oddly. When I boot, one of the following happens: Screen remains totally black. Absolutely nothing comes up. I need to retry booting. (Happens 70% of the time). Laptop starts regular boot. However, somewhere during the boot process it goes black and I need to retry (20% of the time). Screen turning black is more likely when I move the laptop around during boot. Laptop boots properly. Once booted, all is fine. But I'm afraid to turn it off and have been keeping the laptop running till the night. Additional details: All normal lights light up when I boot; whichever of the scenarios goes down. There are no odd sounds or beeps, whichever of the scenarios goes down. I thought it might be the SSD drive that is dying, but it does not use SMART and it appears difficult to troubleshoot. I tried booting with and without the battery, but the scenarios are identical. Before completely investigating the hard drive, I'd like to hear opinions regarding the cause of this problem. Is this most likely the hard drive, or could there be another cause for these symptoms? Using Arch Linux.

Read the article

Computer Turns on Briefly then right back off again.

- by goddamnyouryan

So yesterday I came home from work and went to turn my computer on....it turned on for about 5 seconds then promptly turned right back off again...before I ever saw anything on the screen. I tried again, same result. After several attempts, I've found that the length at which it turns on differs. After trying multiple times in a row, it only stays on for about 3 seconds. If I let it rest for a bit it sometimes will stay on for up to a minute (though it never boots, the screen stays black the whole time). I'm not sure what is causing this issue...I built this computer a little more than 2 years ago and this is the first issue I have ever had with it. I did all the usual checks: -It's not the power switch -The capacitors on the motherboard all seem to be in working order -The PSU seems to be fine as it lights up, fan spins, and will sometimes stay on for about a minute period My hope is that the thermal paste on the cpu has degraded and just needs to be re-applied. Does that seem like a reasonable assumption? I'm going to tear the thing apart and do a minimum system build when I get home, but any heads up as to what I should be looking for would be much appreciated. Any thoughts?

Read the article

C++ simple logging class with UTF-8 output [code example]

- by Andrew

Hello everyone, I was working on one of my academic projects and for the first time I needed pure C++ without GUI. After googling for a while, I did not find any simple and easy to use implementation for logging and created my own. This is a simple implementation with iostreams that logs messages to screen and to the file simultaneously. I was thinking of using templates but then I realized that I do not expect any changes and removed that. It is modified std::wostream with two added modifiers: 1. TimeStamp - prints time-stamp 2. LogMode(LogModes) - switches output: file only, screen only, file+screen. *Boost::utf8_codecvt_facet* is used for UTF-8 output. // ############################################################################ // # Name: MyLog.h # // # Purpose: Logging Class Header # // # Author: Andrew Drach # // # Modified by: <somebody> # // # Created: 03/21/10 # // # SVN-ID: $Id$ # // # Copyright: (c) 2010 Andrew Drach # // # Licence: <license> # // ############################################################################ #ifndef INCLUDED_MYLOG_H #define INCLUDED_MYLOG_H // headers -------------------------------------------------------------------- #include <string> #include <iostream> #include <fstream> #include <exception> #include <boost/program_options/detail/utf8_codecvt_facet.hpp> using namespace std; // definitions ---------------------------------------------------------------- // ---------------------------------------------------------------------------- // DblBuf class // Splits up output stream into two // Inspired by http://wordaligned.org/articles/cpp-streambufs // ---------------------------------------------------------------------------- class DblBuf : public wstreambuf { private: // private member declarations DblBuf(); wstreambuf *bf1; wstreambuf *bf2; virtual int_type overflow(int_type ch) { int_type eof = traits_type::eof(); int_type not_eof = !eof; if ( traits_type::eq_int_type(ch,eof) ) return not_eof; else { char_type ch1 = traits_type::to_char_type(ch); int_type r1( bf1on ? bf1->sputc(ch1) : not_eof ); int_type r2( bf2on ? bf2->sputc(ch1) : not_eof ); return (traits_type::eq_int_type(r1,eof) || traits_type::eq_int_type(r2,eof) ) ? eof : ch; } } virtual int sync() { int r1( bf1on ? bf1->pubsync() : NULL ); int r2( bf2on ? bf2->pubsync() : NULL ); return (r1 == 0 && r2 == 0) ? 0 : -1; } public: // public member declarations explicit DblBuf(wstreambuf *bf1, wstreambuf *bf2) : bf1(bf1), bf2(bf2) { if (bf1) bf1on = true; else bf1on = false; if (bf2) bf2on = true; else bf2on = false; } bool bf1on; bool bf2on; }; // ---------------------------------------------------------------------------- // logstream class // Wrapper for a standard wostream with access to modified buffer // ---------------------------------------------------------------------------- class logstream : public wostream { private: // private member declarations logstream(); public: // public member declarations DblBuf *buf; explicit logstream(wstreambuf *StrBuf, bool isStd = false) : wostream(StrBuf, isStd), buf((DblBuf*)StrBuf) {} }; // ---------------------------------------------------------------------------- // Logging mode Class // ---------------------------------------------------------------------------- enum LogModes{LogToFile=1, LogToScreen, LogToBoth}; class LogMode { private: // private member declarations LogMode(); short mode; public: // public member declarations LogMode(short mode1) : mode(mode1) {} logstream& operator()(logstream &stream1) { switch(mode) { case LogToFile: stream1.buf->bf1on = true; stream1.buf->bf2on = false; break; case LogToScreen: stream1.buf->bf1on = false; stream1.buf->bf2on = true; break; case LogToBoth: stream1.buf->bf1on = true; stream1.buf->bf2on = true; } return stream1; } }; logstream& operator<<(logstream &out, LogMode mode) { return mode(out); } wostream& TimeStamp1(wostream &out1) { time_t time1; struct tm timeinfo; wchar_t timestr[512]; // Get current time and convert it to a string time(&time1); localtime_s (&timeinfo, &time1); wcsftime(timestr, 512,L"[%Y-%b-%d %H:%M:%S %p] ",&timeinfo); return out1 << timestr; } // ---------------------------------------------------------------------------- // MyLog class // Logs events to both file and screen // ---------------------------------------------------------------------------- class MyLog { private: // private member declarations MyLog(); auto_ptr<DblBuf> buf; string mErrorMsg1; string mErrorMsg2; string mErrorMsg3; string mErrorMsg4; public: // public member declarations explicit MyLog(string FileName1, wostream *ScrLog1, locale utf8locale1); ~MyLog(); void NewEvent(wstring str1, bool TimeStamp = true); string FileName; wostream *ScrLog; wofstream File; auto_ptr<logstream> Log; locale utf8locale; }; // ---------------------------------------------------------------------------- // MyLog constructor // ---------------------------------------------------------------------------- MyLog::MyLog(string FileName1, wostream *ScrLog1, locale utf8locale1) : // ctors mErrorMsg1("Failed to open file for application logging! []"), mErrorMsg2("Failed to write BOM! []"), mErrorMsg3("Failed to write to file! []"), mErrorMsg4("Failed to close file! []"), FileName(FileName1), ScrLog(ScrLog1), utf8locale(utf8locale1), File(FileName1.c_str()) { // Adjust error strings mErrorMsg1.insert(mErrorMsg1.length()-1,FileName1); mErrorMsg2.insert(mErrorMsg2.length()-1,FileName1); mErrorMsg3.insert(mErrorMsg3.length()-1,FileName1); mErrorMsg4.insert(mErrorMsg4.length()-1,FileName1); // check for file open errors if ( !File ) throw ofstream::failure(mErrorMsg1); // write UTF-8 BOM File << wchar_t(0xEF) << wchar_t(0xBB) << wchar_t(0xBF); // switch locale to UTF-8 File.imbue(utf8locale); // check for write errors if ( File.bad() ) throw ofstream::failure(mErrorMsg2); buf.reset( new DblBuf(File.rdbuf(),ScrLog->rdbuf()) ); Log.reset( new logstream(&*buf) ); } // ---------------------------------------------------------------------------- // MyLog destructor // ---------------------------------------------------------------------------- MyLog::~MyLog() { *Log << TimeStamp1 << "Log finished." << endl; // clean up objects Log.reset(); buf.reset(); File.close(); // check for file close errors if ( File.bad() ) throw ofstream::failure(mErrorMsg4); } //--------------------------------------------------------------------------- #endif // INCLUDED_MYLOG_H Tested on MSVC 2008, boost 1.42. I do not know if this is the right place to share it. Hope it helps anybody. Feel free to make it better.

Read the article

Java homework help, Error <identifier> expected

- by user2900126

Help with java homework this is my assignment that I have, this assignment code I've tried. But when I try to compile it I keep getting errors which I cant seem to find soloutions too: Error says <identifier> expected for Line 67 public static void () Assignment brief To write a simple java classMobile that models a mobile phone. Details the information stored about each mobile phone will include • Its type e.g. “Sony ericsson x90” or “Samsung Galaxy S”; • Its screen size in inches; You may assume that this a whole number from the scale 3 to 5 inclusive. • Its memory card capacity in gigabytes You may assume that this a whole number • The name of its present service provider You may assume this is a single line of text. • The type of contract with service provider You may assume this is a single line of text. • Its camera resolution in megapixels; You should not assume that this a whole number; • The percentage of charge left on the phone e.g. a fully charged phone will have a charge of 100. You may assume that this a whole number • Whether the phone has GPS or not. Your class will have fields corresponding to these attributes . Start by opening BlueJ, creating a new project called myMobile which has a classMobile and set up the fields that you need, Next you will need to write a Constructor for the class. Assume that each phone is manufactured by creating an object and specifying its type, its screen size, its memory card capacity, its camera resolution and whether it has GPS or not. Therefore you will need a constructor that allows you to pass arguments to initialise these five attributes. Other fields should be set to appropriate default values. You may assume that a new phone comes fully charged. When the phone is sold to its owner, you will need to set the service provider and type of contract with that provider so you will need mutator methods • setProvider () - - to set service provider. • setContractType - - to set the type of contract These methods will be used when the phones provider is changed. You should also write a mutator method ChargeUp () which simulates fully charging the phone. To obtain information about your mobile object you should write • accessor methods corresponding to four of its fields: • getType () – which returns the type of mobile; • getProvider () – which returns the present service provider; • getContractType () – which returns its type of contract; • getCharge () – which returns its remaining charge. An accessor method to printDetails () to print, to the terminal window, a report about the phone e.g. This mobile phone is a sony Erricsson X90 with Service provider BigAl and type of contract PAYG. At present it has 30% of its battery charge remaining. Check that the new method works correctly by for example, • creating a Mobile object and setting its fields; • calling printDetails () and t=checking the report corresponds to the details you have just given the mobile; • changing the service provider and contract type by calling setprovider () and setContractType (); • calling printDetails () and checking the report now prints out the new details. Challenging excercises • write a mutator methodswitchedOnFor () =which simulates using the phone for a specified period. You may assume the phone loses 1% of its charge for each hour that it is switched on . • write an accessor method checkcharge () whichg checks the phone remaing charge. If this charge has a value less than 25%, then this method returns a string containg the message Be aware that you will soon need to re-charge your phone, otherwise it returns a string your phone charge is sufficient. • Write a method changeProvider () which simulates changing the provider (and presumably also the type of service contract). Finally you may add up to four additional fields, with appropriate methods, that might be required in a more detailed model. above is my assignment that I have, this assignment code I've tried. But when I try to oompile it I keep getting errors which I cant seem to find soloutions too: Error says <identifier> expected for Line 67 public static void () /** * to write a simple java class Mobile that models a mobile phone. * * @author (Lewis Burte-Clarke) * @version (14/10/13) */ public class Mobile { // type of phone private String phonetype; // size of screen in inches private int screensize; // menory card capacity private int memorycardcapacity; // name of present service provider private String serviceprovider; // type of contract with service provider private int typeofcontract; // camera resolution in megapixels private int cameraresolution; // the percentage of charge left on the phone private int checkcharge; // wether the phone has GPS or not private String GPS; // instance variables - replace the example below with your own private int x; // The constructor method public Mobile(String mobilephonetype, int mobilescreensize, int mobilememorycardcapacity,int mobilecameraresolution,String mobileGPS, String newserviceprovider) { this.phonetype = mobilephonetype; this.screensize = mobilescreensize; this.memorycardcapacity = mobilememorycardcapacity; this.cameraresolution = mobilecameraresolution; this.GPS = mobileGPS; // you do not use this ones during instantiation,you can remove them if you do not need or assign them some default values //this.serviceprovider = newserviceprovider; //this.typeofcontract = 12; //this.checkcharge = checkcharge; Mobile samsungPhone = new Mobile("Samsung", "1024", "2", "verizon", "8", "GPS"); 1024 = screensize; 2 = memorycardcapacity; 8 = resolution; GPS = gps; "verizon"=serviceprovider; //typeofcontract = 12; //checkcharge = checkcharge; } // A method to display the state of the object to the screen public void displayMobileDetails() { System.out.println("phonetype: " + phonetype); System.out.println("screensize: " + screensize); System.out.println("memorycardcapacity: " + memorycardcapacity); System.out.println("cameraresolution: " + cameraresolution); System.out.println("GPS: " + GPS); System.out.println("serviceprovider: " + serviceprovider); System.out.println("typeofcontract: " + typeofcontract); } /** * The mymobile class implements an application that * simply displays "new Mobile!" to the standard output. */ public class mymobile { public static void main(String[] args) { System.out.println("new Mobile!"); //Display the string. } } public static void buildPhones(){ Mobile Samsung = new Mobile("Samsung", "3.0", "4gb", "8mega pixels", "GPS"); Mobile Blackberry = new Mobile("Blackberry", "3.0", "4gb", "8mega pixels", "GPS"); Samsung.displayMobileDetails(); Blackberry.displayMobileDetails(); } public static void main(String[] args) { buildPhones(); } } any answers.replies and help would be greatly appreciated as I really lost!

Read the article

Parallelism in .NET – Part 10, Cancellation in PLINQ and the Parallel class

- by Reed

Many routines are parallelized because they are long running processes. When writing an algorithm that will run for a long period of time, its typically a good practice to allow that routine to be cancelled. I previously discussed terminating a parallel loop from within, but have not demonstrated how a routine can be cancelled from the caller’s perspective. Cancellation in PLINQ and the Task Parallel Library is handled through a new, unified cooperative cancellation model introduced with .NET 4.0. Cancellation in .NET 4 is based around a new, lightweight struct called CancellationToken. A CancellationToken is a small, thread-safe value type which is generated via a CancellationTokenSource. There are many goals which led to this design. For our purposes, we will focus on a couple of specific design decisions: Cancellation is cooperative. A calling method can request a cancellation, but it’s up to the processing routine to terminate – it is not forced. Cancellation is consistent. A single method call requests a cancellation on every copied CancellationToken in the routine. Let’s begin by looking at how we can cancel a PLINQ query. Supposed we wanted to provide the option to cancel our query from Part 6: double min = collection .AsParallel() .Min(item => item.PerformComputation()); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } We would rewrite this to allow for cancellation by adding a call to ParallelEnumerable.WithCancellation as follows: var cts = new CancellationTokenSource(); // Pass cts here to a routine that could, // in parallel, request a cancellation try { double min = collection .AsParallel() .WithCancellation(cts.Token) .Min(item => item.PerformComputation()); } catch (OperationCanceledException e) { // Query was cancelled before it finished } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here, if the user calls cts.Cancel() before the PLINQ query completes, the query will stop processing, and an OperationCanceledException will be raised. Be aware, however, that cancellation will not be instantaneous. When cts.Cancel() is called, the query will only stop after the current item.PerformComputation() elements all finish processing. cts.Cancel() will prevent PLINQ from scheduling a new task for a new element, but will not stop items which are currently being processed. This goes back to the first goal I mentioned – Cancellation is cooperative. Here, we’re requesting the cancellation, but it’s up to PLINQ to terminate. If we wanted to allow cancellation to occur within our routine, we would need to change our routine to accept a CancellationToken, and modify it to handle this specific case: public void PerformComputation(CancellationToken token) { for (int i=0; i<this.iterations; ++i) { // Add a check to see if we've been canceled // If a cancel was requested, we'll throw here token.ThrowIfCancellationRequested(); // Do our processing now this.RunIteration(i); } } With this overload of PerformComputation, each internal iteration checks to see if a cancellation request was made, and will throw an OperationCanceledException at that point, instead of waiting until the method returns. This is good, since it allows us, as developers, to plan for cancellation, and terminate our routine in a clean, safe state. This is handled by changing our PLINQ query to: try { double min = collection .AsParallel() .WithCancellation(cts.Token) .Min(item => item.PerformComputation(cts.Token)); } catch (OperationCanceledException e) { // Query was cancelled before it finished } PLINQ is very good about handling this exception, as well. There is a very good chance that multiple items will raise this exception, since the entire purpose of PLINQ is to have multiple items be processed concurrently. PLINQ will take all of the OperationCanceledException instances raised within these methods, and merge them into a single OperationCanceledException in the call stack. This is done internally because we added the call to ParallelEnumerable.WithCancellation. If, however, a different exception is raised by any of the elements, the OperationCanceledException as well as the other Exception will be merged into a single AggregateException. The Task Parallel Library uses the same cancellation model, as well. Here, we supply our CancellationToken as part of the configuration. The ParallelOptions class contains a property for the CancellationToken. This allows us to cancel a Parallel.For or Parallel.ForEach routine in a very similar manner to our PLINQ query. As an example, we could rewrite our Parallel.ForEach loop from Part 2 to support cancellation by changing it to: try { var cts = new CancellationTokenSource(); var options = new ParallelOptions() { CancellationToken = cts.Token }; Parallel.ForEach(customers, options, customer => { // Run some process that takes some time... DateTime lastContact = theStore.GetLastContact(customer); TimeSpan timeSinceContact = DateTime.Now - lastContact; // Check for cancellation here options.CancellationToken.ThrowIfCancellationRequested(); // If it's been more than two weeks, send an email, and update... if (timeSinceContact.Days > 14) { theStore.EmailCustomer(customer); customer.LastEmailContact = DateTime.Now; } }); } catch (OperationCanceledException e) { // The loop was cancelled } Notice that here we use the same approach taken in PLINQ. The Task Parallel Library will automatically handle our cancellation in the same manner as PLINQ, providing a clean, unified model for cancellation of any parallel routine. The TPL performs the same aggregation of the cancellation exceptions as PLINQ, as well, which is why a single exception handler for OperationCanceledException will cleanly handle this scenario. This works because we’re using the same CancellationToken provided in the ParallelOptions. If a different exception was thrown by one thread, or a CancellationToken from a different CancellationTokenSource was used to raise our exception, we would instead receive all of our individual exceptions merged into one AggregateException.

Read the article

Access violation in DirectX OMSetRenderTargets

- by IDWMaster

I receive the following error (Unhandled exception at 0x527DAE81 (d3d11_1sdklayers.dll) in Lesson2.Triangles.exe: 0xC0000005: Access violation reading location 0x00000000) when running the Triangle sample application for DirectX 11 in D3D_FEATURE_LEVEL_9_1. This error occurs at the OMSetRenderTargets function, as shown below, and does not happen if I remove that function from the program (but then, the screen is blue, and does not render the triangle) //// THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF //// ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO //// THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A //// PARTICULAR PURPOSE. //// //// Copyright (c) Microsoft Corporation. All rights reserved #include #include #include "DirectXSample.h" #include "BasicMath.h" #include "BasicReaderWriter.h" using namespace Microsoft::WRL; using namespace Windows::UI::Core; using namespace Windows::Foundation; using namespace Windows::ApplicationModel::Core; using namespace Windows::ApplicationModel::Infrastructure; // This class defines the application as a whole. ref class Direct3DTutorialViewProvider : public IViewProvider { private: CoreWindow^ m_window; ComPtr m_swapChain; ComPtr m_d3dDevice; ComPtr m_d3dDeviceContext; ComPtr m_renderTargetView; public: // This method is called on application launch. void Initialize( _In_ CoreWindow^ window, _In_ CoreApplicationView^ applicationView ) { m_window = window; } // This method is called after Initialize. void Load(_In_ Platform::String^ entryPoint) { } // This method is called after Load. void Run() { // First, create the Direct3D device. // This flag is required in order to enable compatibility with Direct2D. UINT creationFlags = D3D11_CREATE_DEVICE_BGRA_SUPPORT; #if defined(_DEBUG) // If the project is in a debug build, enable debugging via SDK Layers with this flag. creationFlags |= D3D11_CREATE_DEVICE_DEBUG; #endif // This array defines the ordering of feature levels that D3D should attempt to create. D3D_FEATURE_LEVEL featureLevels[] = { D3D_FEATURE_LEVEL_11_1, D3D_FEATURE_LEVEL_11_0, D3D_FEATURE_LEVEL_10_1, D3D_FEATURE_LEVEL_10_0, D3D_FEATURE_LEVEL_9_3, D3D_FEATURE_LEVEL_9_1 }; ComPtr d3dDevice; ComPtr d3dDeviceContext; DX::ThrowIfFailed( D3D11CreateDevice( nullptr, // specify nullptr to use the default adapter D3D_DRIVER_TYPE_HARDWARE, nullptr, // leave as nullptr if hardware is used creationFlags, // optionally set debug and Direct2D compatibility flags featureLevels, ARRAYSIZE(featureLevels), D3D11_SDK_VERSION, // always set this to D3D11_SDK_VERSION &d3dDevice, nullptr, &d3dDeviceContext ) ); // Retrieve the Direct3D 11.1 interfaces. DX::ThrowIfFailed( d3dDevice.As(&m_d3dDevice) ); DX::ThrowIfFailed( d3dDeviceContext.As(&m_d3dDeviceContext) ); // After the D3D device is created, create additional application resources. CreateWindowSizeDependentResources(); // Create a Basic Reader-Writer class to load data from disk. This class is examined // in the Resource Loading sample. BasicReaderWriter^ reader = ref new BasicReaderWriter(); // Load the raw vertex shader bytecode from disk and create a vertex shader with it. auto vertexShaderBytecode = reader-ReadData("SimpleVertexShader.cso"); ComPtr vertexShader; DX::ThrowIfFailed( m_d3dDevice-CreateVertexShader( vertexShaderBytecode-Data, vertexShaderBytecode-Length, nullptr, &vertexShader ) ); // Create an input layout that matches the layout defined in the vertex shader code. // For this lesson, this is simply a float2 vector defining the vertex position. const D3D11_INPUT_ELEMENT_DESC basicVertexLayoutDesc[] = { { "POSITION", 0, DXGI_FORMAT_R32G32_FLOAT, 0, 0, D3D11_INPUT_PER_VERTEX_DATA, 0 }, }; ComPtr inputLayout; DX::ThrowIfFailed( m_d3dDevice-CreateInputLayout( basicVertexLayoutDesc, ARRAYSIZE(basicVertexLayoutDesc), vertexShaderBytecode-Data, vertexShaderBytecode-Length, &inputLayout ) ); // Load the raw pixel shader bytecode from disk and create a pixel shader with it. auto pixelShaderBytecode = reader-ReadData("SimplePixelShader.cso"); ComPtr pixelShader; DX::ThrowIfFailed( m_d3dDevice-CreatePixelShader( pixelShaderBytecode-Data, pixelShaderBytecode-Length, nullptr, &pixelShader ) ); // Create vertex and index buffers that define a simple triangle. float3 triangleVertices[] = { float3(-0.5f, -0.5f,13.5f), float3( 0.0f, 0.5f,0), float3( 0.5f, -0.5f,0), }; D3D11_BUFFER_DESC vertexBufferDesc = {0}; vertexBufferDesc.ByteWidth = sizeof(float3) * ARRAYSIZE(triangleVertices); vertexBufferDesc.Usage = D3D11_USAGE_DEFAULT; vertexBufferDesc.BindFlags = D3D11_BIND_VERTEX_BUFFER; vertexBufferDesc.CPUAccessFlags = 0; vertexBufferDesc.MiscFlags = 0; vertexBufferDesc.StructureByteStride = 0; D3D11_SUBRESOURCE_DATA vertexBufferData; vertexBufferData.pSysMem = triangleVertices; vertexBufferData.SysMemPitch = 0; vertexBufferData.SysMemSlicePitch = 0; ComPtr vertexBuffer; DX::ThrowIfFailed( m_d3dDevice-CreateBuffer( &vertexBufferDesc, &vertexBufferData, &vertexBuffer ) ); // Once all D3D resources are created, configure the application window. // Allow the application to respond when the window size changes. m_window-SizeChanged += ref new TypedEventHandler( this, &Direct3DTutorialViewProvider::OnWindowSizeChanged ); // Specify the cursor type as the standard arrow cursor. m_window-PointerCursor = ref new CoreCursor(CoreCursorType::Arrow, 0); // Activate the application window, making it visible and enabling it to receive events. m_window-Activate(); // Enter the render loop. Note that tailored applications should never exit. while (true) { // Process events incoming to the window. m_window-Dispatcher-ProcessEvents(CoreProcessEventsOption::ProcessAllIfPresent); // Specify the render target we created as the output target. ID3D11RenderTargetView* targets[1] = {m_renderTargetView.Get()}; m_d3dDeviceContext-OMSetRenderTargets( 1, targets, NULL // use no depth stencil ); // Clear the render target to a solid color. const float clearColor[4] = { 0.071f, 0.04f, 0.561f, 1.0f }; //Code fails here m_d3dDeviceContext-ClearRenderTargetView( m_renderTargetView.Get(), clearColor ); m_d3dDeviceContext-IASetInputLayout(inputLayout.Get()); // Set the vertex and index buffers, and specify the way they define geometry. UINT stride = sizeof(float3); UINT offset = 0; m_d3dDeviceContext-IASetVertexBuffers( 0, 1, vertexBuffer.GetAddressOf(), &stride, &offset ); m_d3dDeviceContext-IASetPrimitiveTopology(D3D11_PRIMITIVE_TOPOLOGY_TRIANGLELIST); // Set the vertex and pixel shader stage state. m_d3dDeviceContext-VSSetShader( vertexShader.Get(), nullptr, 0 ); m_d3dDeviceContext-PSSetShader( pixelShader.Get(), nullptr, 0 ); // Draw the cube. m_d3dDeviceContext-Draw(3,0); // Present the rendered image to the window. Because the maximum frame latency is set to 1, // the render loop will generally be throttled to the screen refresh rate, typically around // 60Hz, by sleeping the application on Present until the screen is refreshed. DX::ThrowIfFailed( m_swapChain-Present(1, 0) ); } } // This method is called before the application exits. void Uninitialize() { } private: // This method is called whenever the application window size changes. void OnWindowSizeChanged( _In_ CoreWindow^ sender, _In_ WindowSizeChangedEventArgs^ args ) { m_renderTargetView = nullptr; CreateWindowSizeDependentResources(); } // This method creates all application resources that depend on // the application window size. It is called at app initialization, // and whenever the application window size changes. void CreateWindowSizeDependentResources() { if (m_swapChain != nullptr) { // If the swap chain already exists, resize it. DX::ThrowIfFailed( m_swapChain-ResizeBuffers( 2, 0, 0, DXGI_FORMAT_R8G8B8A8_UNORM, 0 ) ); } else { // If the swap chain does not exist, create it. DXGI_SWAP_CHAIN_DESC1 swapChainDesc = {0}; swapChainDesc.Stereo = false; swapChainDesc.BufferUsage = DXGI_USAGE_RENDER_TARGET_OUTPUT; swapChainDesc.Scaling = DXGI_SCALING_NONE; swapChainDesc.Flags = 0; // Use automatic sizing. swapChainDesc.Width = 0; swapChainDesc.Height = 0; // This is the most common swap chain format. swapChainDesc.Format = DXGI_FORMAT_R8G8B8A8_UNORM; // Don't use multi-sampling. swapChainDesc.SampleDesc.Count = 1; swapChainDesc.SampleDesc.Quality = 0; // Use two buffers to enable flip effect. swapChainDesc.BufferCount = 2; // We recommend using this swap effect for all applications. swapChainDesc.SwapEffect = DXGI_SWAP_EFFECT_FLIP_SEQUENTIAL; // Once the swap chain description is configured, it must be // created on the same adapter as the existing D3D Device. // First, retrieve the underlying DXGI Device from the D3D Device. ComPtr dxgiDevice; DX::ThrowIfFailed( m_d3dDevice.As(&dxgiDevice) ); // Ensure that DXGI does not queue more than one frame at a time. This both reduces // latency and ensures that the application will only render after each VSync, minimizing // power consumption. DX::ThrowIfFailed( dxgiDevice-SetMaximumFrameLatency(1) ); // Next, get the parent factory from the DXGI Device. ComPtr dxgiAdapter; DX::ThrowIfFailed( dxgiDevice-GetAdapter(&dxgiAdapter) ); ComPtr dxgiFactory; DX::ThrowIfFailed( dxgiAdapter-GetParent( __uuidof(IDXGIFactory2), &dxgiFactory ) ); // Finally, create the swap chain. DX::ThrowIfFailed( dxgiFactory-CreateSwapChainForImmersiveWindow( m_d3dDevice.Get(), DX::GetIUnknown(m_window), &swapChainDesc, nullptr, // allow on all displays &m_swapChain ) ); } // Once the swap chain is created, create a render target view. This will // allow Direct3D to render graphics to the window. ComPtr backBuffer; DX::ThrowIfFailed( m_swapChain-GetBuffer( 0, __uuidof(ID3D11Texture2D), &backBuffer ) ); DX::ThrowIfFailed( m_d3dDevice-CreateRenderTargetView( backBuffer.Get(), nullptr, &m_renderTargetView ) ); // After the render target view is created, specify that the viewport, // which describes what portion of the window to draw to, should cover // the entire window. D3D11_TEXTURE2D_DESC backBufferDesc = {0}; backBuffer-GetDesc(&backBufferDesc); D3D11_VIEWPORT viewport; viewport.TopLeftX = 0.0f; viewport.TopLeftY = 0.0f; viewport.Width = static_cast(backBufferDesc.Width); viewport.Height = static_cast(backBufferDesc.Height); viewport.MinDepth = D3D11_MIN_DEPTH; viewport.MaxDepth = D3D11_MAX_DEPTH; m_d3dDeviceContext-RSSetViewports(1, &viewport); } }; // This class defines how to create the custom View Provider defined above. ref class Direct3DTutorialViewProviderFactory : IViewProviderFactory { public: IViewProvider^ CreateViewProvider() { return ref new Direct3DTutorialViewProvider(); } }; [Platform::MTAThread] int main(array^) { auto viewProviderFactory = ref new Direct3DTutorialViewProviderFactory(); Windows::ApplicationModel::Core::CoreApplication::Run(viewProviderFactory); return 0; }

Read the article

Parallelism in .NET – Part 18, Task Continuations with Multiple Tasks

- by Reed

In my introduction to Task continuations I demonstrated how the Task class provides a more expressive alternative to traditional callbacks. Task continuations provide a much cleaner syntax to traditional callbacks, but there are other reasons to switch to using continuations… Task continuations provide a clean syntax, and a very simple, elegant means of synchronizing asynchronous method results with the user interface. In addition, continuations provide a very simple, elegant means of working with collections of tasks. Prior to .NET 4, working with multiple related asynchronous method calls was very tricky. If, for example, we wanted to run two asynchronous operations, followed by a single method call which we wanted to run when the first two methods completed, we’d have to program all of the handling ourselves. We would likely need to take some approach such as using a shared callback which synchronized against a common variable, or using a WaitHandle shared within the callbacks to allow one to wait for the second. Although this could be accomplished easily enough, it requires manually placing this handling into every algorithm which requires this form of blocking. This is error prone, difficult, and can easily lead to subtle bugs. Similar to how the Task class static methods providing a way to block until multiple tasks have completed, TaskFactory contains static methods which allow a continuation to be scheduled upon the completion of multiple tasks: TaskFactory.ContinueWhenAll. This allows you to easily specify a single delegate to run when a collection of tasks has completed. For example, suppose we have a class which fetches data from the network. This can be a long running operation, and potentially fail in certain situations, such as a server being down. As a result, we have three separate servers which we will “query” for our information. Now, suppose we want to grab data from all three servers, and verify that the results are the same from all three. With traditional asynchronous programming in .NET, this would require using three separate callbacks, and managing the synchronization between the various operations ourselves. The Task and TaskFactory classes simplify this for us, allowing us to write: var server1 = Task.Factory.StartNew( () => networkClass.GetResults(firstServer) ); var server2 = Task.Factory.StartNew( () => networkClass.GetResults(secondServer) ); var server3 = Task.Factory.StartNew( () => networkClass.GetResults(thirdServer) ); var result = Task.Factory.ContinueWhenAll( new[] {server1, server2, server3 }, (tasks) => { // Propogate exceptions (see below) Task.WaitAll(tasks); return this.CompareTaskResults( tasks[0].Result, tasks[1].Result, tasks[2].Result); }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This is clean, simple, and elegant. The one complication is the Task.WaitAll(tasks); statement. Although the continuation will not complete until all three tasks (server1, server2, and server3) have completed, there is a potential snag. If the networkClass.GetResults method fails, and raises an exception, we want to make sure to handle it cleanly. By using Task.WaitAll, any exceptions raised within any of our original tasks will get wrapped into a single AggregateException by the WaitAll method, providing us a simplified means of handling the exceptions. If we wait on the continuation, we can trap this AggregateException, and handle it cleanly. Without this line, it’s possible that an exception could remain uncaught and unhandled by a task, which later might trigger a nasty UnobservedTaskException. This would happen any time two of our original tasks failed. Just as we can schedule a continuation to occur when an entire collection of tasks has completed, we can just as easily setup a continuation to run when any single task within a collection completes. If, for example, we didn’t need to compare the results of all three network locations, but only use one, we could still schedule three tasks. We could then have our completion logic work on the first task which completed, and ignore the others. This is done via TaskFactory.ContinueWhenAny: var server1 = Task.Factory.StartNew( () => networkClass.GetResults(firstServer) ); var server2 = Task.Factory.StartNew( () => networkClass.GetResults(secondServer) ); var server3 = Task.Factory.StartNew( () => networkClass.GetResults(thirdServer) ); var result = Task.Factory.ContinueWhenAny( new[] {server1, server2, server3 }, (firstTask) => { return this.ProcessTaskResult(firstTask.Result); }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Here, instead of working with all three tasks, we’re just using the first task which finishes. This is very useful, as it allows us to easily work with results of multiple operations, and “throw away” the others. However, you must take care when using ContinueWhenAny to properly handle exceptions. At some point, you should always wait on each task (or use the Task.Result property) in order to propogate any exceptions raised from within the task. Failing to do so can lead to an UnobservedTaskException.

Read the article

Microsoft TypeScript : A Typed Superset of JavaScript

- by shiju

JavaScript is gradually becoming a ubiquitous programming language for the web, and the popularity of JavaScript is increasing day by day. Earlier, JavaScript was just a language for browser. But now, we can write JavaScript apps for browser, server and mobile. With the advent of Node.js, you can build scalable, high performance apps on the server with JavaScript. But many developers, especially developers who are working with static type languages, are hating the JavaScript language due to the lack of structuring and the maintainability problems of JavaScript. Microsoft TypeScript is trying to solve some problems of JavaScript when we are building scalable JavaScript apps. Microsoft TypeScript TypeScript is Microsoft's solution for writing scalable JavaScript programs with the help of Static Types, Interfaces, Modules and Classes along with greater tooling support. TypeScript is a typed superset of JavaScript that compiles to plain JavaScript. This would be more productive for developers who are coming from static type languages. You can write scalable JavaScript apps in TypeScript with more productive and more maintainable manner, and later you can compiles to plain JavaScript which will be run on any browser and any OS. TypeScript will work with browser based JavaScript apps and JavaScript apps that following CommonJS specification. You can use TypeScript for building HTML 5 apps, Node.JS apps, WinRT apps. TypeScript is providing better tooling support with Visual Studio, Sublime Text, Vi, Emacs. Microsoft has open sourced its TypeScript languages on CodePlex at http://typescript.codeplex.com/ Install TypeScript You can install TypeScript compiler as a Node.js package via the NPM or you can install as a Visual Studio 2012 plug-in which will enable you better tooling support within the Visual Studio IDE. Since TypeScript is distributed as a Node.JS package, and it can be installed on other OS such as Linux and MacOS. The following command will install TypeScript compiler via an npm package for node.js npm install –g typescript TypeScript provides a Visual Studio 2012 plug-in as MSI file which will install TypeScript and also provides great tooling support within the Visual Studio, that lets the developers to write TypeScript apps with greater productivity and better maintainability. You can download the Visual Studio plug-in from here Building JavaScript apps with TypeScript You can write typed version of JavaScript programs with TypeScript and then compiles it to plain JavaScript code. The beauty of the TypeScript is that it is already JavaScript and normal JavaScript programs are valid TypeScript programs, which means that you can write normal JavaScript code and can use typed version of JavaScript whenever you want. TypeScript files are using extension .ts and this will be compiled using a compiler named tsc. The following is a sample program written in TypeScript greeter.ts 1: class Greeter { 2: greeting: string; 3: constructor (message: string) { 4: this.greeting = message; 5: } 6: greet() { 7: return "Hello, " + this.greeting; 8: } 9: } 10: 11: var greeter = new Greeter("world"); 12: 13: var button = document.createElement('button') 14: button.innerText = "Say Hello" 15: button.onclick = function() { 16: alert(greeter.greet()) 17: } 18: 19: document.body.appendChild(button) .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The above program is compiling with the TypeScript compiler as shown in the below picture The TypeScript compiler will generate a JavaScript file after compiling the TypeScript program. If your TypeScript programs having any reference to other TypeScript files, it will automatically generate JavaScript files for the each referenced files. The following code block shows the compiled version of plain JavaScript for the above greeter.ts greeter.js 1: var Greeter = (function () { 2: function Greeter(message) { 3: this.greeting = message; 4: } 5: Greeter.prototype.greet = function () { 6: return "Hello, " + this.greeting; 7: }; 8: return Greeter; 9: })(); 10: var greeter = new Greeter("world"); 11: var button = document.createElement('button'); 12: button.innerText = "Say Hello"; 13: button.onclick = function () { 14: alert(greeter.greet()); 15: }; 16: document.body.appendChild(button); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Tooling Support with Visual Studio TypeScript is providing a plug-in for Visual Studio which will provide an excellent support for writing TypeScript programs within the Visual Studio. The following screen shot shows the Visual Studio template for TypeScript apps The following are the few screen shots of Visual Studio IDE for TypeScript apps. Summary TypeScript is Microsoft's solution for writing scalable JavaScript apps which will solve lot of problems involved in larger JavaScript apps. I hope that this solution will attract lot of developers who are really looking for writing maintainable structured code in JavaScript, without losing any productivity. TypeScript lets developers to write JavaScript apps with the help of Static Types, Interfaces, Modules and Classes and also providing better productivity. I am a passionate developer on Node.JS and would definitely try to use TypeScript for building Node.JS apps on the Windows Azure cloud. I am really excited about to writing Node.JS apps by using TypeScript, from my favorite development IDE Visual Studio. You can follow me on twitter at @shijucv

Read the article

Simplify your Ajax code by using jQuery Global Ajax Handlers and ajaxSetup low-level interface

- by hajan

Creating web applications with consistent layout and user interface is very important for your users. In several ASP.NET projects I’ve completed lately, I’ve been using a lot jQuery and jQuery Ajax to achieve rich user experience and seamless interaction between the client and the server. In almost all of them, I took advantage of the nice jQuery global ajax handlers and jQuery ajax functions. Let’s say you build web application which mainly interacts using Ajax post and get to accomplish various operations. As you may already know, you can easily perform Ajax operations using jQuery Ajax low-level method or jQuery $.get, $.post, etc. Simple get example: $.get("/Home/GetData", function (d) { alert(d); }); As you can see, this is the simplest possible way to make Ajax call. What it does in behind is constructing low-level Ajax call by specifying all necessary information for the request, filling with default information set for the required properties such as data type, content type, etc... If you want to have some more control over what is happening with your Ajax Request, you can easily take advantage of the global ajax handlers. In order to register global ajax handlers, jQuery API provides you set of global Ajax methods. You can find all the methods in the following link http://api.jquery.com/category/ajax/global-ajax-event-handlers/, and these are: ajaxComplete ajaxError ajaxSend ajaxStart ajaxStop ajaxSuccess And the low-level ajax interfaces http://api.jquery.com/category/ajax/low-level-interface/: ajax ajaxPrefilter ajaxSetup For global settings, I usually use ajaxSetup combining it with the ajax event handlers. $.ajaxSetup is very good to help you set default values that you will use in all of your future Ajax Requests, so that you won’t need to repeat the same properties all the time unless you want to override the default settings. Mainly, I am using global ajaxSetup function similarly to the following way: $.ajaxSetup({ cache: false, error: function (x, e) { if (x.status == 550) alert("550 Error Message"); else if (x.status == "403") alert("403. Not Authorized"); else if (x.status == "500") alert("500. Internal Server Error"); else alert("Error..."); }, success: function (x) { //do something global on success... } }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now, you can make ajax call using low-level $.ajax interface and you don’t need to worry about specifying any of the properties we’ve set in the $.ajaxSetup function. So, you can create your own ways to handle various situations when your Ajax requests are occurring. Sometimes, some of your Ajax Requests may take much longer than expected… So, in order to make user friendly UI that will show some progress bar or animated image that something is happening in behind, you can combine ajaxStart and ajaxStop methods to do the same. First of all, add one <div id=”loading” style=”display:none;”> <img src="@Url.Content("~/Content/images/ajax-loader.gif")" alt="Ajax Loader" /></div> anywhere on your Master Layout / Master page (you can download nice ajax loading images from http://ajaxload.info/). Then, add the following two handlers: $(document).ajaxStart(function () { $("#loading").attr("style", "position:absolute; z-index: 1000; top: 0px; "+ "left:0px; text-align: center; display:none; background-color: #ddd; "+ "height: 100%; width: 100%; /* These three lines are for transparency "+ "in all browsers. */-ms-filter:\"progid:DXImageTransform.Microsoft.Alpha(Opacity=50)\";"+ " filter: alpha(opacity=50); opacity:.5;"); $("#loading img").attr("style", "position:relative; top:40%; z-index:5;"); $("#loading").show(); }); $(document).ajaxStop(function () { $("#loading").removeAttr("style"); $("#loading img").removeAttr("style"); $("#loading").hide(); }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Note: While you can reorganize the style in a more reusable way, since these are global Ajax Start/Stop, it is very possible that you won’t use the same style in other places. With this way, you will see that now for any ajax request in your web site or application, you will have the loading image appearing providing better user experience. What I’ve shown is several useful examples on how to simplify your Ajax code by using Global Ajax Handlers and the low-level AjaxSetup function. Of course, you can do a lot more with the other methods as well. Hope this was helpful. Regards, Hajan

Read the article

Stream Media and Live TV Across the Internet with Orb

- by DigitalGeekery

Looking for a way to stream your media collection across the Internet? Or perhaps watch and record TV remotely? Today we are going to look at how to do all that and more with Orb. Requirements Windows XP / Vista / 7 or Intel based Mac w/ OS X 10.5 or later. 1 GB RAM or more Pentium 4 2.4 GHz or higher / AMD Athlon 3200+ Broadband connections TV Tuner for streaming and recording live TV (optional) Note: Slower internet connections may result in stuttering during playback. Installation and Setup Download and install Orb on your home computer. (Download link below) You’ll want to take the defaults for the initial portion of the install. When we get to the Orb Account setup portion of the install is when we will have to enter information and make some decisions. Choose your language and click Next. We’ll need to create and user account and password. A valid email address is required as we’ll need to confirm the account later. Click Next. Now you’ll want to choose your media sources. Orb will automatically look for folders that may contain media files. You can add or remove folders click on the (+) or (-) buttons. To remove a folder, click on it once to select it from the list and then click the minus (-) button. To add a folder, click the plus (+) button and browse for the folder. You can add local folders as well as shared folders from networked computers and USB attached storage. Note: Both the host computer running Orb and the networked computer will need to be running to access shared network folders remotely. When you’ve selected all your media files, click Next. Orb will proceed to index your media files… When the indexing is complete, click Next. Orb TV Setup Note: Streaming Live TV to Macs is not currently supported. If you have a TV tuner card connected to your PC, you can opt to configure Orb to stream live or recorded TV. Click Next to configure TV. Or, choose Skip if you don’t wish to configure Orb for TV. If you have a Digital tuner card, type in your Zip Code and click Get List to pull your channel listings. Select a TV provider from the list and click Next. If not, click Skip. You can select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished. Next choose an analog provider, if necessary, and click Next. Select “Yes” or “No” for a set top box and click Next. Just as we did with the Digital tuner, select or deselect any channels by checking or un-checking the box to each channel. Select Auto Scan to let Orb find more channels or disable the ones with no reception. Click Next when finished. Now we’re finished with the setup. Click Close. Accessing your Media Remotely Media files are accessed through a web-based interface. Before we go any further, however, we’ll need to confirm our username and password. Check your inbox for an email from Orb Networks. Click the enclosed confirmation link. You’ll be prompted to enter the username and password you selected in your browser then click Next. Your account will be confirmed. Now, we’re ready to enjoy our media remotely. To get started, point your browser to the MyCast website from your remote computer. (See link below) Enter your credentials and click Log In. Once logged in, you’ll be presented with the MyCast Home screen. By default you’ll see a handful of “channels” such as a TV program guide, random audio and photos, video favorites, and weather. You can add, remove, or customize channels. To add additional channels, click on Add Channels at the top right… …and select from the dropdown list. To access your full media libraries, click Open Application at the top left and select from one of the options. Live and Recorded TV If you have a TV tuner card you configured for Orb, you’ll see your program guide on the TV / Webcams screen. To watch or record a show, click on the program listing to bring up a detail box. Then click the red button to record, or the green button to play. When recording a show, you’ll see a pulsating red icon at the top right of the listing in the program guide. If you want to watch Live TV, you may be prompted to choose your media player, depending on your browser and settings. Playback should begin shortly. Note for Windows Media Center Users If you try to stream live TV in Orb while Windows Media Center is running on your PC, you’ll get an error message. Click the Stop MediaCenter button and then try again. Audio On the Audio screen, you’ll find your music files indexed by genre, artist, and album. You can play a selection by clicking once and then clicking the green play button, or by simply double-clicking. Playback will begin in the default media player for the streaming format. Video Video works essentially the same as audio. Click on a selection and press the green play button, or double-click on the video title. Video playback will begin in the default media player for the streaming format. Streaming Formats You can change the default streaming format in the control panel settings. To access the Control Panel, click on Open Applications and select Control Panel. You can also click Settings at the top right. Select General from the drop down list and then click on the Streaming Formats tab. You are provided four options. Flash, Windows Media, .SDP, and .PLS. Creating Playlists To create playlists, drag and drop your media title to the playlist work area on the right, or click Add to playlist on the top menu. Click Save when finished. Sharing your Media Orb allows you to share media playlists across the Internet with friends and family. There are a few ways to accomplish this. We’ll start by click the Share button at the bottom of the playlist work area after you’ve compiled your playlist. You’ll be prompted to choose a method by which to share your playlist. You’ll have the option to share your playlist publicly or privately. You can share publically through links, blogs, or on your Orb public profile. By choosing the Public Profile option, Orb will automatically create a profile page for you with a URL like http://public.orb.com/username that anyone can easily access on the Internet. The private sharing option allows you to invite friends by email and requires recipients to register with Orb. You can also give your playlist a custom name, or accept the auto-generated title. Click OK when finished. Users who visit your public profile will be able to view and stream any of your shared playlists to their computer or supported device. Portable Media Devices and Smartphones Orb can stream media to many portable devices and 3G phones. Streaming audio is supported on the iPhone and iPod Touch through the Safari browser. However, video and live TV streaming requires the Orb Live iPhone App. Orb Live is available in the App store for $9.99. To stream media to your portable device, go to the MyCast website in your mobile browser and login. Browse for your media or playlist. Make a selection and play the media. Playback will begin. We found streaming music to both the Droid and the iPhone to work quite nicely. Video playback on the Droid, however, left a bit to be desired. The video looked good, but the audio tended to be out of sync. System Tray Control Panel By default Orb runs in the system tray on start up. To access the System Tray Control Panel, right-click on the Orb icon in the system tray and select Control Panel. Login with your Orb username and password and click OK. From here you can add or remove media sources, add manage accounts, change your password, and more. If you’d rather not run Orb on Startup, click the General icon. Unselect the checkbox next to Start Orb when the system starts. Conclusion It may seem like a lot of steps, but getting Orb up and running isn’t terribly difficult. Orb is available for both Windows and Intel based Macs. It also supports streaming to many Game Consoles such as the Wii, PS3, and XBox 360. If you are running Windows 7 on multiple computers, you may want to check out our write-up on how to stream music and video over the Internet with Windows Media Player 12. Downloads Download Orb Logon to MyCast Similar Articles Productive Geek Tips Stream Music and Video Over the Internet with Windows Media Player 12Enable Media Streaming in Windows Home Server to Windows Media PlayerStream Media from Windows 7 to XP with VLC Media PlayerShare Digital Media With Other Computers on a Home Network with Windows 7Automatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Looking for Good Windows Media Player 12 Plug-ins? Find Out the Celebrity You Resemble With FaceDouble Whoa ! Use Printflush to Solve Printing Problems Icelandic Volcano Webcams Open Multiple Links At One Go

Read the article

Using Teleriks new LINQ implementation to create OData feeds

This week Telerik released a new LINQ implementation that is simple to use and produces domain models very fast. Built on top of the enterprise grade OpenAccess ORM, you can connect to any database that OpenAccess can connect to such as: SQL Server, MySQL, Oracle, SQL Azure, VistaDB, etc. While this is a separate LINQ implementation from traditional OpenAccess Entites, you can use the visual designer without ever interacting with OpenAccess, however, you can always hook into the advanced ORM features like caching, fetch plan optimization, etc, if needed. Just to show off how easy our LINQ implementation is to use, I will walk you through building an OData feed using Data Services Update for .NET Framework 3.5 SP1. (Memo to Microsoft: P-L-E-A-S-E hire someone from Apple to name your products.) How easy is it? If you have a fast machine, are skilled with the mouse, and type fast, you can do this in about 60 seconds via three easy steps. (I promise in about 2-3 weeks that you can do this in less then 30 seconds. Stay tuned for that.) Step 1 (15-20 seconds): Building your Domain Model In your web project in Visual Studio, right click on the project and select Add|New Item and select Telerik OpenAccess Domain Model as your item template. Give the file a meaningful name as well. Select your database type (SQL Server, SQL Azure, Oracle, MySQL, VistaDB, etc) and build the connection string. If you already have a Visual Studio connection string already saved, this step is trivial. Then select your tables, enter a name for your model and click Finish. In this case I connected to Northwind and selected only Customers, Orders, and Order Details. I named my model NorthwindEntities and will use that in my DataService. Step 2 (20-25 seconds): Adding and Configuring your Data Service In your web project in Visual Studio, right click on the project and select Add|New Item and select ADO .NET Data Service as your item template and name your service. In the code behind for your Data Service you have to make three small changes. Add the name of your Telerik Domain Model (entered in Step 1) as the DataService name (shown on line 6 below as NorthwindEntities) and uncomment line 11 and add a * to show all entities. Optionally if you want to take advantage of the DataService 3.5 updates, add line 13 (and change IDataServiceConfiguration to DataServiceConfiguration in line 9.) 1: using System.Data.Services; 2: using System.Data.Services.Common; 3: 4: namespace Telerik.RLINQ.Astoria.Web 5: { 6: public class NorthwindService : DataService<NorthwindEntities> 7: { 8: //change the IDataServiceConfigurationto DataServiceConfiguration 9: public static void InitializeService(DataServiceConfiguration config) 10: { 11: config.SetEntitySetAccessRule("*", EntitySetRights.All); 12: //take advantage of the "Astoria3.5 Update" features 13: config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; 14: } 15: } 16: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Step 3 (~30 seconds): Adding the DataServiceKeys You now have to tell your data service what are the primary keys of each entity. To do this you have to create a new code file and create a few partial classes. If you type fast, use copy and paste from your first entity, and use a refactoring productivity tool, you can add these 6-8 lines of code or so in about 30 seconds. This is the most tedious step, but dont worry, Ive bribed some of the developers and our next update will eliminate this step completely. Just create a partial class for each entity you have mapped and add the attribute [DataServiceKey] on top of it along with the keys field name. If you have any complex properties, you will need to make them a primitive type, as I do in line 15. Create this as a separate file, dont manipulate the generated data access classes in case you want to regenerate them again later (even thought that would be much faster.) 1: using System.Data.Services.Common; 2: 3: namespace Telerik.RLINQ.Astoria.Web 4: { 5: [DataServiceKey("CustomerID")] 6: public partial class Customer 7: { 8: } 9: 10: [DataServiceKey("OrderID")] 11: public partial class Order 12: { 13: } 14: 15: [DataServiceKey(new string[] { "OrderID", "ProductID" })] 16: public partial class OrderDetail 17: { 18: } 19: 20: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Done! Time to run the service. Now, lets run the service! Select the svc file and right click and say View in Browser. You will see your OData service and can interact with it in the browser. Now that you have an OData service set up, you can consume it in one of the many ways that OData is consumed: using LINQ, the Silverlight OData client, Excel PowerPivot, or PhP, etc. Happy Data Servicing! Technorati Tags: Telerik,Astoria,Data Services Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Building a Windows Phone 7 Twitter Application using Silverlight

- by ScottGu

On Monday I had the opportunity to present the MIX 2010 Day 1 Keynote in Las Vegas (you can watch a video of it here). In the keynote I announced the release of the Silverlight 4 Release Candidate (we’ll ship the final release of it next month) and the VS 2010 RC tools for Silverlight 4. I also had the chance to talk for the first time about how Silverlight and XNA can now be used to build Windows Phone 7 applications. During my talk I did two quick Windows Phone 7 coding demos using Silverlight – a quick “Hello World” application and a “Twitter” data-snacking application. Both applications were easy to build and only took a few minutes to create on stage. Below are the steps you can follow yourself to build them on your own machines as well. [Note: In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Building a “Hello World” Windows Phone 7 Application First make sure you’ve installed the Windows Phone Developer Tools CTP – this includes the Visual Studio 2010 Express for Windows Phone development tool (which will be free forever and is the only thing you need to develop and build Windows Phone 7 applications) as well as an add-on to the VS 2010 RC that enables phone development within the full VS 2010 as well. After you’ve downloaded and installed the Windows Phone Developer Tools CTP, launch the Visual Studio 2010 Express for Windows Phone that it installs or launch the VS 2010 RC (if you have it already installed), and then choose “File”->”New Project.” Here, you’ll find the usual list of project template types along with a new category: “Silverlight for Windows Phone”. The first CTP offers two application project templates. The first is the “Windows Phone Application” template - this is what we’ll use for this example. The second is the “Windows Phone List Application” template - which provides the basic layout for a master-details phone application: After creating a new project, you’ll get a view of the design surface and markup. Notice that the design surface shows the phone UI, letting you easily see how your application will look while you develop. For those familiar with Visual Studio, you’ll also find the familiar ToolBox, Solution Explorer and Properties pane. For our HelloWorld application, we’ll start out by adding a TextBox and a Button from the Toolbox. Notice that you get the same design experience as you do for Silverlight on the web or desktop. You can easily resize, position and align your controls on the design surface. Changing properties is easy with the Properties pane. We’ll change the name of the TextBox that we added to username and change the page title text to “Hello world.” We’ll then write some code by double-clicking on the button and create an event handler in the code-behind file (MainPage.xaml.cs). We’ll start out by changing the title text of the application. The project template included this title as a TextBlock with the name textBlockListTitle (note that the current name incorrectly includes the word “list”; that will be fixed for the final release.) As we write code against it we get intellisense showing the members available. Below we’ll set the Text property of the title TextBlock to “Hello “ + the Text property of the TextBox username: We now have all the code necessary for a Hello World application. We have two choices when it comes to deploying and running the application. We can either deploy to an actual device itself or use the built-in phone emulator: Because the phone emulator is actually the phone operating system running in a virtual machine, we’ll get the same experience developing in the emulator as on the device. For this sample, we’ll just press F5 to start the application with debugging using the emulator. Once the phone operating system loads, the emulator will run the new “Hello world” application exactly as it would on the device: Notice that we can change several settings of the emulator experience with the emulator toolbar – which is a floating toolbar on the top right. This includes the ability to re-size/zoom the emulator and two rotate buttons. Zoom lets us zoom into even the smallest detail of the application: The orientation buttons allow us easily see what the application looks like in landscape mode (orientation change support is just built into the default template): Note that the emulator can be reused across F5 debug sessions - that means that we don’t have to start the emulator for every deployment. We’ve added a dialog that will help you from accidentally shutting down the emulator if you want to reuse it. Launching an application on an already running emulator should only take ~3 seconds to deploy and run. Within our Hello World application we’ll click the “username” textbox to give it focus. This will cause the software input panel (SIP) to open up automatically. We can either type a message or – since we are using the emulator – just type in text. Note that the emulator works with Windows 7 multi-touch so, if you have a touchscreen, you can see how interaction will feel on a device just by pressing the screen. We’ll enter “MIX 10” in the textbox and then click the button – this will cause the title to update to be “Hello MIX 10”: We provide the same Visual Studio experience when developing for the phone as other .NET applications. This means that we can set a breakpoint within the button event handler, press the button again and have it break within the debugger: Building a “Twitter” Windows Phone 7 Application using Silverlight Rather than just stop with “Hello World” let’s keep going and evolve it to be a basic Twitter client application. We’ll return to the design surface and add a ListBox, using the snaplines within the designer to fit it to the device screen and make the best use of phone screen real estate. We’ll also rename the Button “Lookup”: We’ll then return to the Button event handler in Main.xaml.cs, and remove the original “Hello World” line of code and take advantage of the WebClient networking class to asynchronously download a Twitter feed. This takes three lines of code in total: (1) declaring and creating the WebClient, (2) attaching an event handler and then (3) calling the asynchronous DownloadStringAsync method. In the DownloadStringAsync call, we’ll pass a Twitter Uri plus a query string which pulls the text from the “username” TextBox. This feed will pull down the respective user’s most frequent posts in an XML format. When the call completes, the DownloadStringCompleted event is fired and our generated event handler twitter_DownloadStringCompleted will be called: The result returned from the Twitter call will come back in an XML based format. To parse this we’ll use LINQ to XML. LINQ to XML lets us create simple queries for accessing data in an xml feed. To use this library, we’ll first need to add a reference to the assembly (right click on the References folder in the solution explorer and choose “Add Reference): We’ll then add a “using System.Xml.Linq” namespace reference at the top of the code-behind file at the top of Main.xaml.cs file: We’ll then add a simple helper class called TwitterItem to our project. TwitterItem has three string members – UserName, Message and ImageSource: We’ll then implement the twitter_DownloadStringCompleted event handler and use LINQ to XML to parse the returned XML string from Twitter. What the query is doing is pulling out the three key pieces of information for each Twitter post from the username we passed as the query string. These are the ImageSource for their profile image, the Message of their tweet and their UserName. For each Tweet in the XML, we are creating a new TwitterItem in the IEnumerable<XElement> returned by the Linq query. We then assign the generated TwitterItem sequence to the ListBox’s ItemsSource property: We’ll then do one more step to complete the application. In the Main.xaml file, we’ll add an ItemTemplate to the ListBox. For the demo, I used a simple template that uses databinding to show the user’s profile image, their tweet and their username. <ListBox Height="521" HorizonalAlignment="Left" Margin="0,131,0,0" Name="listBox1" VerticalAlignment="Top" Width="476"> <ListBox.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal" Height="132"> <Image Source="{Binding ImageSource}" Height="73" Width="73" VerticalAlignment="Top" Margin="0,10,8,0"/> <StackPanel Width="370"> <TextBlock Text="{Binding UserName}" Foreground="#FFC8AB14" FontSize="28" /> <TextBlock Text="{Binding Message}" TextWrapping="Wrap" FontSize="24" /> </StackPanel> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> Now, pressing F5 again, we are able to reuse the emulator and re-run the application. Once the application has launched, we can type in a Twitter username and press the Button to see the results. Try my Twitter user name (scottgu) and you’ll get back a result of TwitterItems in the Listbox: Try using the mouse (or if you have a touchscreen device your finger) to scroll the items in the Listbox – you should find that they move very fast within the emulator. This is because the emulator is hardware accelerated – and so gives you the same fast performance that you get on the actual phone hardware. Summary Silverlight and the VS 2010 Tools for Windows Phone (and the corresponding Expression Blend Tools for Windows Phone) make building Windows Phone applications both really easy and fun. At MIX this week a number of great partners (including Netflix, FourSquare, Seesmic, Shazaam, Major League Soccer, Graphic.ly, Associated Press, Jackson Fish and more) showed off some killer application prototypes they’ve built over the last few weeks. You can watch my full day 1 keynote to see them in action. I think they start to show some of the promise and potential of using Silverlight with Windows Phone 7. I’ll be doing more blog posts in the weeks and months ahead that cover that more. Hope this helps, Scott

Read the article

CodePlex Daily Summary for Wednesday, May 12, 2010

CodePlex Daily Summary for Wednesday, May 12, 2010New ProjectsAMP (Adamo Media Player): AMP is a custom media player that specializes in large media collections! Change the way you manage your media!BoogiePartners: BoogiePartners provides a loose collection of utilities or extensions for Boogie and SpecSharp developers.C# Developer Utility Library: Collection of helpful code functions including zero-config rolling file logging, parameter validation, reflection & object construction, I18N count...Commerce Server 2009 Orders using Pipelines in a Console Application: Using Commerce Server 2009 outside of a Web Application this project show how to create dummy Orders using Pipelines in a NON WEB CONTEXT, an examp...CRM Queue Manager C#: CRM 4 Queue Manager written in C#. Based on the original VB.Net CRM Queue Manager with some changes, additions and feature changes. Converts emai...DbBuilder: This is a tool indended for creation of MS SQL database from scratch, incremental updates, management of redeployable objects, etc. using scripted ...DbNetData: A collection of cross vendor database interface classes for .NET written in C# providing a consistent and simplified way of accessing SQL Server,Or...Deploy Workflow Manager: Kick off a workflow associated with a SharePoint List on all list items at once. SharePoint Designer Workflows will also be included. This projec...DigiLini - digital on screen ruler: Handy desktop tool for everyone who does ever do something graphical on his computer. There is an sizable horizontal and vertial ruler. You can pos...Dynamic Grid Data Type for Umbraco: The Dynamic Grid Data Type for Umbraco is a custom ASCX/C# control that was created to store tabular data as an Umbraco "Data Type". There's an abi...FlashPlus: An extension for Google Chrome and a bookmarklet for Internet Explorer and Firefox, this project makes media content on browsers more usable. This...Flat Database: Simple project making it really quick and easy, to implement a simple flat-file database for an application.Flood Watch Spam Control: Flood watch is a C# based application meant to help prevent site black listings. This application monitors outbound smtp streams, if a stream excee...Gamebox: gameboxKill Bill: Kill Bill covers the areas of customers, suppliers, products, sales and administration divided into modules which together form the system for the ...KND Decoder: Der KND Decoder konvertiert die lästigen Zahlenwerte, in den Java Dateien vom Knuddels Applet, zu lesbaren Strings. Die neue dekodier Methode wurde...Moonbeam: D3D11 FrameworkSite Defender: Add-on for blogs or anywhere else there could be people spamming your website.sMODfix: -Stringzilla: A string formatting classes designed for .NET 4 to enable named string formatting and conditional string formatting options based upon bound data c...The CQRS Kitchen: The CQRS Kitchen is an example application build with Silverlight 4 that demonstrates how to implement a CQRS / Event Sourcing application with the...XELF Framework for XNA / .NET: XELF Framework for XNA / .NET 　XNA Game Studioおよび.NET Framework用のライブラリ・フレームワークとしてXELFが開発したC#ソースコードを含むプロジェクトです。　現在は、「XELF.Framework」のWindows用XNA G...xxxxxxxxx: xxxxxxxNew ReleasesASP.NET MVC 2 - CommonLibrary.CMS: CommonLibrary CMS - Alpha: CommonLibrary CMSA simple yet powerful CMS system in ASP.NET MVC 2 using C# 3.5. ActiveRecord based support for Blogs, Widgets, Pages, Parts, Ev...ASP.NET MVC Extensions: v1.0 RTM: v1.0 RTMAWS SimpleDB Browser: Release 2: Miscellaneous fixes from the Alpha release. Built to work with the released version of the .Net Framework 4.0.BIDS Helper: 1.4.3.0: This release addresses the following issues: For some people the BIDS Helper extensions to the Project Properties page for the SSIS Deploy plugin w...Bojinx: Bojinx Core V4.5.13: Fixes / Enhancements: Sequencer now accepts Commands directly without using events. Command queue now accepts both events and commands EventBu...CF-Soft: TestCases_DROP1: TestCases_DROP1CodePlex Runtime Intelligence Integration: PreEmptive.Attributes distributable: Contains a signed redistributable version of the PreEmptive.Attributes.dll library that non .NET 4 applications can use support in-code instrumenta...Convection Game Engine (Basic Edition): Convection Basic (44772): Compiled version of Convection Basic change set 44772.CRM Queue Manager C#: Initial release: Initial release of the CRM Queue Manager in C#. Release includes both the installer as well as the latest source code in zippped format. Running...DbNetData: DbNetData.1.0: Initial releaseDigiLini - digital on screen ruler: DigiLini 1.0: First stable version.Facturator - Create invoices easy and fast: Facturator.zip: current stable versionFlat Database: Initial Release: This is the working initial release of FlatDBKharaPOS: MSDN Magazine Sample: This is the release that supports the MSDN magazine article "Enterprise Patterns with WCF RIA Services. Some of the project was affected by the upg...Let's Up: 1.1 (Build 100511): - Add short and long break feature.Mesopotamia Experiment: Mesopotamia 1.2.88: Primarly bug fixes... Bug Fixes - fixed bug in synapse mutating whereby new ones were of one side only eg, source or target - fixed bug in screen ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Class Libraries, version 1.0.1.123: The NodeXL class libraries can be used to display network graphs in .NET applications. To include a NodeXL network graph in a WPF desktop or Windo...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel 2007 Template, version 1.0.1.123: The NodeXL Excel 2007 template displays a network graph using edge and vertex lists stored in an Excel 2007 workbook. What's NewThis version makes...Over Store: OverStore 1.18.0.0: Version number is increased. New callback events added: Persisting and Persisted, which are raised on actually writing object data into the stora...Reusable Library: V1.0.7: A collection of reusable abstractions for enterprise application developerReusable Library Demo: V1.0.5: A demonstration of reusable abstractions for enterprise application developerRuntime Intelligence Endpoint Starter Kit: Runtime Intelligence Endpoint Starter Kit 20100511: Added crossdomain policy files so Silverlight applications can send usage data from anywhere.Scorm2CC: SCORM2CC Release 0.12.0.58711 net-2.0 Alpha: SCORM2CC Release 0.12.0.58711 net-2.0 AlphaShake - C# Make: Shake v0.1.14: Updated API to match with the current documentation.SharePoint LogViewer: SharePoint Log Viewer 2.6: This is a maintenance release. It has bug several fixes.Site Directory for SharePoint 2010 (from Microsoft Consulting Services, UK): v1.4: As 1.3 with the following changes Addition of a 'Site Data' webpart Site Directory can now be a site collection root or sub-site Scan job now ...sMODfix: sMODfix v1.0: Basic Versionsmtp4dev: smtp4dev 2.0: Smtp4dev 2.0 is powered by a completely re-written server component and now offers SSL/TLS and AUTH support.SocialScapes: SocialScapes Sidebar 1.0: The SocialScapes Sidebar is the first release of the new SocialScapes suite. There will be more modules to come along with a complete data aggrega...SSIS Multiple Hash: Multiple Hash V1.2: This is version 1.2 of the Multiple Hash SSIS Component. It supports SQL 2005 and SQL 2008, although you have to download the correct install pack...Surfium: Beta build: Somehow testedTerminals: Terminals 1.9a - RDP6 Support: The major change in this release is that Terminals has been upgraded to require RDP Client 6 to be installed for creating RDP connections. Backward...TFS Compare: Release 3.0: This release provides a new feature - the ability to navigate back and forth between document differences. Also, this release provides support for...VCC: Latest build, v2.1.30511.0: Automatic drop of latest buildyoutubeFisher: youtubeFisher v2.0: What's new new method of youtube parameters capturing HD 720p video support full-HD 1080p video support add Cancel option to stop file downl...Most Popular ProjectsWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryMirror Testing SystemRawrThe Information Literacy Education Learning Environment (ILE)Caliburn: An Application Framework for WPF and SilverlightwhiteBlogEngine.NETPHPExceljQuery Library for SharePoint Web ServicesTweetSharp

Read the article

Move Files from a Failing PC with an Ubuntu Live CD

- by Trevor Bekolay

You’ve loaded the Ubuntu Live CD to salvage files from a failing system, but where do you store the recovered files? We’ll show you how to store them on external drives, drives on the same PC, a Windows home network, and other locations. We’ve shown you how to recover data like a forensics expert, but you can’t store recovered files back on your failed hard drive! There are lots of ways to transfer the files you access from an Ubuntu Live CD to a place that a stable Windows machine can access them. We’ll go through several methods, starting each section from the Ubuntu desktop – if you don’t yet have an Ubuntu Live CD, follow our guide to creating a bootable USB flash drive, and then our instructions for booting into Ubuntu. If your BIOS doesn’t let you boot using a USB flash drive, don’t worry, we’ve got you covered! Use a Healthy Hard Drive If your computer has more than one hard drive, or your hard drive is healthy and you’re in Ubuntu for non-recovery reasons, then accessing your hard drive is easy as pie, even if the hard drive is formatted for Windows. To access a hard drive, it must first be mounted. To mount a healthy hard drive, you just have to select it from the Places menu at the top-left of the screen. You will have to identify your hard drive by its size. Clicking on the appropriate hard drive mounts it, and opens it in a file browser. You can now move files to this hard drive by drag-and-drop or copy-and-paste, both of which are done the same way they’re done in Windows. Once a hard drive, or other external storage device, is mounted, it will show up in the /media directory. To see a list of currently mounted storage devices, navigate to /media by clicking on File System in a File Browser window, and then double-clicking on the media folder. Right now, our media folder contains links to the hard drive, which Ubuntu has assigned a terribly uninformative label, and the PLoP Boot Manager CD that is currently in the CD-ROM drive. Connect a USB Hard Drive or Flash Drive An external USB hard drive gives you the advantage of portability, and is still large enough to store an entire hard disk dump, if need be. Flash drives are also very quick and easy to connect, though they are limited in how much they can store. When you plug a USB hard drive or flash drive in, Ubuntu should automatically detect it and mount it. It may even open it in a File Browser automatically. Since it’s been mounted, you will also see it show up on the desktop, and in the /media folder. Once it’s been mounted, you can access it and store files on it like you would any other folder in Ubuntu. If, for whatever reason, it doesn’t mount automatically, click on Places in the top-left of your screen and select your USB device. If it does not show up in the Places list, then you may need to format your USB drive. To properly remove the USB drive when you’re done moving files, right click on the desktop icon or the folder in /media and select Safely Remove Drive. If you’re not given that option, then Eject or Unmount will effectively do the same thing. Connect to a Windows PC on your Local Network If you have another PC or a laptop connected through the same router (wired or wireless) then you can transfer files over the network relatively quickly. To do this, we will share one or more folders from the machine booted up with the Ubuntu Live CD over the network, letting our Windows PC grab the files contained in that folder. As an example, we’re going to share a folder on the desktop called ToShare. Right-click on the folder you want to share, and click Sharing Options. A Folder Sharing window will pop up. Check the box labeled Share this folder. A window will pop up about the sharing service. Click the Install service button. Some files will be downloaded, and then installed. When they’re done installing, you’ll be appropriately notified. You will be prompted to restart your session. Don’t worry, this won’t actually log you out, so go ahead and press the Restart session button. The Folder Sharing window returns, with Share this folder now checked. Edit the Share name if you’d like, and add checkmarks in the two checkboxes below the text fields. Click Create Share. Nautilus will ask your permission to add some permissions to the folder you want to share. Allow it to Add the permissions automatically. The folder is now shared, as evidenced by the new arrows above the folder’s icon. At this point, you are done with the Ubuntu machine. Head to your Windows PC, and open up Windows Explorer. Click on Network in the list on the left, and you should see a machine called UBUNTU in the right pane. Note: This example is shown in Windows 7; the same steps should work for Windows XP and Vista, but we have not tested them. Double-click on UBUNTU, and you will see the folder you shared earlier! As well as any other folders you’ve shared from Ubuntu. Double click on the folder you want to access, and from there, you can move the files from the machine booted with Ubuntu to your Windows PC. Upload to an Online Service There are many services online that will allow you to upload files, either temporarily or permanently. As long as you aren’t transferring an entire hard drive, these services should allow you to transfer your important files from the Ubuntu environment to any other machine with Internet access. We recommend compressing the files that you want to move, both to save a little bit of bandwidth, and to save time clicking on files, as uploading a single file will be much less work than a ton of little files. To compress one or more files or folders, select them, and then right-click on one of the members of the group. Click Compress…. Give the compressed file a suitable name, and then select a compression format. We’re using .zip because we can open it anywhere, and the compression rate is acceptable. Click Create and the compressed file will show up in the location selected in the Compress window. Dropbox If you have a Dropbox account, then you can easily upload files from the Ubuntu environment to Dropbox. There is no explicit limit on the size of file that can be uploaded to Dropbox, though a free account begins with a total limit of 2 GB of files in total. Access your account through Firefox, which can be opened by clicking on the Firefox logo to the right of the System menu at the top of the screen. Once into your account, press the Upload button on top of the main file list. Because Flash is not installed in the Live CD environment, you will have to switch to the basic uploader. Click Browse…find your compressed file, and then click Upload file. Depending on the size of the file, this could take some time. However, once the file has been uploaded, it should show up on any computer connected through Dropbox in a matter of minutes. Google Docs Google Docs allows the upload of any type of file – making it an ideal place to upload files that we want to access from another computer. While your total allocation of space varies (mine is around 7.5 GB), there is a per-file maximum of 1 GB. Log into Google Docs, and click on the Upload button at the top left of the page. Click Select files to upload and select your compressed file. For safety’s sake, uncheck the checkbox concerning converting files to Google Docs format, and then click Start upload. Go Online – Through FTP If you have access to an FTP server – perhaps through your web hosting company, or you’ve set up an FTP server on a different machine – you can easily access the FTP server in Ubuntu and transfer files. Just make sure you don’t go over your quota if you have one. You will need to know the address of the FTP server, as well as the login information. Click on Places > Connect to Server… Choose the FTP (with login) Service type, and fill in your information. Adding a bookmark is optional, but recommended. You will be asked for your password. You can choose to remember it until you logout, or indefinitely. You can now browse your FTP server just like any other folder. Drop files into the FTP server and you can retrieve them from any computer with an Internet connection and an FTP client. Conclusion While at first the Ubuntu Live CD environment may seem claustrophobic, it has a wealth of options for connecting to peripheral devices, local computers, and machines on the Internet – and this article has only scratched the surface. Whatever the storage medium, Ubuntu’s got an interface for it! Similar Articles Productive Geek Tips Backup Your Windows Live Writer SettingsMove a Window Without Clicking the Titlebar in UbuntuRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayReset Your Ubuntu Password Easily from the Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals

Read the article

Shuffle tiles position in the beginning of the game XNA Csharp

- by GalneGunnar

Im trying to create a puzzlegame where you move tiles to certain positions to make a whole image. I need help with randomizing the tiles startposition so that they don't create the whole image at the beginning. There is also something wrong with my offset, that's why it's set to (0,0). I know my code is not good, but Im just starting to learn :] Thanks in advance My Game1 class: { public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; Texture2D PictureTexture; Texture2D FrameTexture; // Offset för bildgraff Vector2 Offset = new Vector2(0,0); //skapar en array som ska hålla delar av den stora bilden Square[,] squareArray = new Square[4, 4]; // Random randomeraBilder = new Random(); //Width och Height för bilden int pictureHeight = 95; int pictureWidth = 144; Random randomera = new Random(); int index = 0; MouseState oldMouseState; int WindowHeight; int WindowWidth; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; //scalar Window till 800x 600y graphics.PreferredBackBufferWidth = 800; graphics.PreferredBackBufferHeight = 600; graphics.ApplyChanges(); } protected override void Initialize() { IsMouseVisible = true; base.Initialize(); } protected override void LoadContent() { spriteBatch = new SpriteBatch(GraphicsDevice); PictureTexture = Content.Load<Texture2D>(@"Images/bildgraff"); FrameTexture = Content.Load<Texture2D>(@"Images/framer"); //Laddar in varje liten bild av den stora bilden i en array for (int x = 0; x < 4; x++) { for (int y = 0; y < 4; y++) { Vector2 position = new Vector2(x * pictureWidth, y * pictureHeight); position = position + Offset; Rectangle square = new Rectangle(x * pictureWidth, y * pictureHeight, pictureWidth, pictureHeight); Square frame = new Square(position, PictureTexture, square, Offset, index); squareArray[x, y] = frame; index++; } } } protected override void UnloadContent() { } protected override void Update(GameTime gameTime) { if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); MouseState ms = Mouse.GetState(); if (oldMouseState.LeftButton == ButtonState.Pressed && ms.LeftButton == ButtonState.Released) { // ta reda på vilken position vi har tryckt på int col = ms.X / pictureWidth; int row = ms.Y / pictureHeight; for (int x = 0; x < squareArray.GetLength(0); x++) { for (int y = 0; y < squareArray.GetLength(1); y++) { // kollar om rutan är tom och så att indexet inte går utanför för "col" och "row" if (squareArray[x, y].index == 0 && col >= 0 && row >= 0 && col <= 3 && row <= 3) { if (squareArray[x, y].index == 0 * col) { //kollar om rutan brevid mouseclick är tom if (col > 0 && squareArray[col - 1, row].index == 0 || row > 0 && squareArray[col, row - 1].index == 0 || col < 3 && squareArray[col + 1, row].index == 0 || row < 3 && squareArray[col, row + 1].index == 0) { Square sqaure = squareArray[col, row]; Square hal = squareArray[x, y]; squareArray[x, y] = sqaure; squareArray[col, row] = hal; for (int i = 0; i < 4; i++) { for (int j = 0; j < 4; j++) { Vector2 goalPosition = new Vector2(x * pictureWidth, y * pictureHeight); squareArray[x, y].Swap(goalPosition); } } } } } } } } //if (oldMouseState.RightButton == ButtonState.Pressed && ms.RightButton == ButtonState.Released) //{ // for (int x = 0; x < 4; x++) // { // for (int y = 0; y < 4; y++) // { // } // } //} oldMouseState = ms; base.Update(gameTime); } protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); WindowHeight = Window.ClientBounds.Height; WindowWidth = Window.ClientBounds.Width; Rectangle screenPosition = new Rectangle(0,0, WindowWidth, WindowHeight); spriteBatch.Begin(); spriteBatch.Draw(FrameTexture, screenPosition, Color.White); //Ritar ut alla brickorna förutom den som har index 0 for (int x = 0; x < 4; x++) { for (int y = 0; y < 4; y++) { if (squareArray[x, y].index != 0) { squareArray[x, y].Draw(spriteBatch); } } } spriteBatch.End(); base.Draw(gameTime); } } } My square class: class Square { public Vector2 position; public Texture2D grafTexture; public Rectangle square; public Vector2 offset; public int index; public Square(Vector2 position, Texture2D grafTexture, Rectangle square, Vector2 offset, int index) { this.position = position; this.grafTexture = grafTexture; this.square = square; this.offset = offset; this.index = index; } public void Draw(SpriteBatch spritebatch) { spritebatch.Draw(grafTexture, position, square, Color.White); } public void RandomPosition() { } public void Swap(Vector2 Goal ) { if (Goal.X > position.X) { position.X = position.X + 144; } else if (Goal.X < position.X) { position.X = position.X - 144; } else if (Goal.Y < position.Y) { position.Y = position.Y - 95; } else if (Goal.Y > position.Y) { position.Y = position.Y + 95; } } } }

Read the article

Silverlight for Windows Embedded Tutorial (step 5 and a bit of Windows Phone 7)

- by Valter Minute

If you haven’t spent the last week in the middle of the Sahara desert or traveling on a sled in the north pole area you should have heard something about the launch of Windows Phone 7 Series (or Windows Phone Series 7, or Windows Series Phone 7 or something like that). Even if you are in the middle of the desert or somewhere around the north pole you may have been reached by the news, since it seems that WP7S (using the full name will kill my available bandwidth!) is generating a lot of buzz in the development and IT communities. One of the most important aspects of this new platform is that it will be programmed using a new set of tools and frameworks, completely different from the ones used on older releases of Windows Mobile (or SmartPhone, or PocketPC or whatever…). WP7S applications can be developed using Silverlight or XNA. If you want to learn something more about WP7S development you can download the preview of Charles Petzold’s book about it: http://www.charlespetzold.com/phone/index.html Charles Petzold is also the author of “Programming Windows”, the first book I ever read about programming on Windows (it was Windows 3.0 at that time!). The fact that even I was able to learn how to develop Windows application is a proof of the quality of Petzold’s work. This book is up to his standards and the 150pages preview is already rich in technical contents without being boring or complicated to understand. I may be able to become a Windows Phone developer thanks to mr. Petzold. Mr. Petzold uses some nice samples to introduce the basic concepts of Silverlight development on WP7S. On this new platform you’ll use managed code to develop your application, so those samples can’t be ported on Windows CE R3 as they are, but I would like to take one of the first samples (called “SilverlightTapHello1”) and adapt it to Silverlight for Windows Embedded to show that even plain old native code can be used to develop “cool” user interfaces! The sample shows the standard WP7S title header and a textbox with an hello world message inside it. When the user touches the textbox, it will change its color. When the user touches the background (Grid) behind it, its default color (plain old White) will be restored. Let’s see how we can implement the same features on our embedded device! I took the XAML code of the sample (you can download the book samples here: http://download.microsoft.com/download/1/D/B/1DB49641-3956-41F1-BAFA-A021673C709E/CodeSamples_DRAFTPreview_ProgrammingWindowsPhone7Series.zip) and changed it a little bit to remove references to WP7S or managed runtime. If you compare the resulting files you will see that I was able to keep all the resources inside the App.xaml files and the structure of MainPage.XAML almost intact. This is the Silverlight for Windows Embedded version of MainPage.XAML: <UserControl x:Class="SilverlightTapHello1.MainPage" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:phoneNavigation="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone.Controls.Navigation" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" d:DesignWidth="480" d:DesignHeight="800" FontFamily="{StaticResource PhoneFontFamilyNormal}" FontSize="{StaticResource PhoneFontSizeNormal}" Foreground="{StaticResource PhoneForegroundBrush}" Width="640" Height="480"> <Grid x:Name="LayoutRoot" Background="{StaticResource PhoneBackgroundBrush}"> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="*"/> </Grid.RowDefinitions>  <Grid x:Name="TitleGrid" Grid.Row="0"> <TextBlock Text="SILVERLIGHT TAP HELLO #1" x:Name="textBlockPageTitle" Style="{StaticResource PhoneTextPageTitle1Style}"/> <TextBlock Text="main page" x:Name="textBlockListTitle" Style="{StaticResource PhoneTextPageTitle2Style}"/> </Grid>  <Grid x:Name="ContentGrid" Grid.Row="1" MouseLeftButtonDown="ContentGrid_MouseButtonDown" Background="{StaticResource PhoneBackgroundBrush}"> <TextBlock x:Name="TextBlock" Text="Hello, Silverlight for Windows Embedded!" HorizontalAlignment="Center" VerticalAlignment="Center" /> </Grid> </Grid> </UserControl> If you compare it to the WP7S sample (not reported here to avoid any copyright issue) you’ll notice that I had to replace the original phoneNavigation:PhoneApplicationPage with UserControl as the root node. This make sense because there is not support for phone applications on CE 6. I also had to specify width and height of my main page (on the WP7S device this will be adjusted by the OS) and I had to replace the multi-touch event handler with the MouseLeftButtonDown event (no multitouch support for Windows CE R3, still). I also changed the hello message, of course. I used XAML2CPP to generate the boring part of our application and then added the initialization code to WinMain: int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPTSTR lpCmdLine, int nCmdShow) { if (!XamlRuntimeInitialize()) return -1; HRESULT retcode; IXRApplicationPtr app; if (FAILED(retcode=GetXRApplicationInstance(&app))) return -1; XRXamlSource dictsrc; dictsrc.SetResource(hInstance,TEXT("XAML"),IDR_XAML_App); if (FAILED(retcode=app->LoadResourceDictionary(&dictsrc,NULL))) return -1; MainPage page; if (FAILED(page.Init(hInstance,app))) return -1; UINT exitcode; if (FAILED(page.GetVisualHost()->StartDialog(&exitcode))) return -1; return exitcode; } You may have noticed that there is something different from the previous samples. I added the code to load a resource dictionary. Resources are an important feature of XAML that allows you to define some values that could be replaced inside any XAML file loaded by the runtime. You can use resources to define custom styles for your fonts, backgrounds, controls etc. and to support internationalization, by providing different strings for different languages. The rest of our WinMain isn’t that different. It creates an instances of our MainPage object and displays it. The MainPage class implements an event handler for the MouseLeftButtonDown event of the ContentGrid: class MainPage : public TMainPage<MainPage> { public: HRESULT ContentGrid_MouseButtonDown(IXRDependencyObject* source,XRMouseButtonEventArgs* args) { HRESULT retcode; IXRSolidColorBrushPtr brush; IXRApplicationPtr app; if (FAILED(retcode=GetXRApplicationInstance(&app))) return retcode; if (FAILED(retcode=app->CreateObject(IID_IXRSolidColorBrush,&brush))) return retcode; COLORREF color=RGBA(0xff,0xff,0xff,0xff); if (args->pOriginalSource==TextBlock) color=RGBA(rand()&0xFF,rand()&0xFF,rand()&0xFF,0xFF); if (FAILED(retcode=brush->SetColor(color))) return retcode; if (FAILED(retcode=TextBlock->SetForeground(brush))) return retcode; return S_OK; } }; As you can see this event is generated when a used clicks inside the grid or inside one of the objects it contains. Since our TextBlock is inside the grid, we don’t need to provide an event handler for its MouseLeftButtonDown event. We can just use the pOriginalSource member of the event arguments to check if the event was generated inside the textblock. If the event was generated inside the grid we create a white brush,if it’s inside the textblock we create some randomly colored brush. Notice that we need to use the RGBA macro to create colors, specifying also a transparency value for them. If we use the RGB macro the resulting color will have its Alpha channel set to zero and will be transparent. Using the SetForeground method we can change the color of our control. You can compare this to the managed code that you can find at page 40-41 of Petzold’s preview book and you’ll see that the native version isn’t much more complex than the managed one. As usual you can download the full code of the sample here: http://cid-9b7b0aefe3514dc5.skydrive.live.com/self.aspx/.Public/SilverlightTapHello1.zip And remember to pre-order Charles Petzold’s “Programming Windows Phone 7 series”, I bet it will be a best-seller! Technorati Tags: Silverlight for Windows Embedded,Windows CE

Read the article

The future for Microsoft

- by Scott Dorman

Originally posted on: http://geekswithblogs.net/sdorman/archive/2013/10/16/the-future-for-microsoft.aspxMicrosoft is in the process of reinventing itself. While some may argue that it’s “too little, too late” or that their growing consumer-focused strategy is wrong, the truth of the situation is that Microsoft is reinventing itself into a new company. While Microsoft is now calling themselves a “devices and services” company, that’s not entirely accurate. Let’s look at some facts: Microsoft will always (for the long-term foreseeable future) be financially split into the following divisions: Windows/Operating Systems, which for FY13 made up approximately 24% of overall revenue. Server and Tools, which for FY13 made up approximately 26% of overall revenue. Enterprise/Business Products, which for FY13 made up approximately 32% of overall revenue. Entertainment and Devices, which for FY13 made up approximately 13% of overall revenue. Online Services, which for FY13 made up approximately 4% of overall revenue. It is important to realize that hardware products like the Surface fall under the Windows/Operating Systems division while products like the Xbox 360 fall under the Entertainment and Devices division. (Presumably other hardware, such as mice, keyboards, and cameras, also fall under the Entertainment and Devices division.) It’s also unclear where Microsoft’s recent acquisition of Nokia’s handset division will fall, but let’s assume that it will be under Entertainment and Devices as well. Now, for the sake of argument, let’s assume a slightly different structure that I think is more in line with how Microsoft presents itself and how the general public sees it: Consumer Products and Devices, which would probably make up approximately 9% of overall revenue. Developer Tools, which would probably make up approximately 13% of overall revenue. Enterprise Products and Devices, which would probably make up approximately 47% of overall revenue. Entertainment, which would probably make up approximately 13% of overall revenue. Online Services, which would probably make up approximately 17% of overall revenue. (Just so we’re clear, in this structure hardware products like the Surface, a portion of Windows sales, and other hardware fall under the Consumer Products and Devices division. I’m assuming that more of the income for the Windows division is coming from enterprise/volume licenses so 15% of that income went to the Enterprise Products and Devices division. Most of the enterprise services, like Azure, fall under the Online Services division so half of the Server and Tools income went there as well.) No matter how you look at it, the bulk of Microsoft’s income still comes from not just the enterprise but also software sales, and this really shouldn’t surprise anyone. So, now that the stage is set…what’s the future for Microsoft? The future I see for Microsoft (again, this is just my prediction based on my own instinct, gut-feel and publicly available information) is this: Microsoft is becoming a consumer-focused enterprise company. Let’s look at it a different way. Microsoft is an enterprise-focused company trying to create a larger consumer presence. To a large extent, this is the exact opposite of Apple, who is really a consumer-focused company trying to create a larger enterprise presence. The major reason consumer-focused companies (like Apple) have started making in-roads into the enterprise is the “bring your own device” phenomenon. Yes, Apple has created some “game-changing” products but their enterprise influence is still relatively small. Unfortunately (for this blog post at least), Apple provides revenue in terms of hardware products rather than business divisions, so it’s not possible to do a direct comparison. However, in the interest of transparency, from Apple’s Quarterly Report (filed 24 July 2013), their revenue breakdown is: iPhone, which for the 3 months ending 29 June 2013 made up approximately 51% of revenue. iPad, which for the 3 months ending 29 June 2013 made up approximately 18% of revenue. Mac, which for the 3 months ending 29 June 2013 made up approximately 14% of revenue. iPod, which for the 3 months ending 29 June 2013 made up approximately 2% of revenue. iTunes, Software, and Services, which for the 3 months ending 29 June 2013 made up approximately 11% of revenue. Accessories, which for the 3 months ending 29 July 2013 made up approximately 3% of revenue. From this, it’s pretty clear that Apple is a consumer-and-hardware-focused company. At this point, you may be asking yourself “Where is all of this going?” The answer to that lies in Microsoft’s shift in company focus. They are becoming more consumer focused, but what exactly does that mean? The biggest change (at least that’s been in the news lately) is the pending purchase of Nokia’s handset division. This, in combination with their Surface line of tablets and the Xbox, will put Microsoft squarely in the realm of a hardware-focused company in addition to being a software-focused company. That can (and most likely will) shift the revenue split to looking at revenue based on software sales (both consumer and enterprise) and also hardware sales (mostly on the consumer side). If we look at things strictly from a Windows perspective, Microsoft clearly has a lot of irons in the fire at the moment. Discounting the various product SKUs available and painting the picture with broader strokes, there are currently 5 different Windows-based operating systems: Windows Phone Windows Phone 7.x, which runs on top of the Windows CE kernel Windows Phone 8.x+, which runs on top of the Windows 8 kernel Windows RT The ARM-based version of Windows 8, which runs on top of the Windows 8 kernel Windows (Pro) The Intel-based version of Windows 8, which runs on top of the Windows 8 kernel Xbox The Xbox 360, which runs it’s own proprietary OS. The Xbox One, which runs it’s own proprietary OS, a version of Windows running on top of the Windows 8 kernel and a proprietary “manager” OS which manages the other two. Over time, Windows Phone 7.x devices will fade so that really leaves 4 different versions. Looking at Windows RT and Windows Phone 8.x paints an interesting story. Right now, all mobile phone devices run on some sort of ARM chip and that doesn’t look like it will change any time soon. That means Microsoft has two different Windows based operating systems for the ARM platform. Long term, it doesn’t make sense for Microsoft to continue supporting that arrangement. I have long suspected (since the Surface was first announced) that Microsoft will unify these two variants of Windows and recent speculation from some of the leading Microsoft watchers lends credence to this suspicion. It is rumored that upcoming Windows Phone releases will include support for larger screen sizes, relax the requirement to have a hardware-based back button and will continue to improve API parity between Windows Phone and Windows RT. At the same time, Windows RT will include support for smaller screen sizes. Since both of these operating systems are based on the same core Windows kernel, it makes sense (both from a financial and development resource perspective) for Microsoft to unify them. The user interfaces are already very similar. So similar in fact, that visually it’s difficult to tell them apart. To illustrate this, here are two screen captures: Other than a few variations (the Bing News app, the picture shown in the Pictures tile and the spacing between the tiles) these are identical. The one on the left is from my Windows 8.1 laptop (which looks the same as on my Surface RT) and the one on the right is from my Windows Phone 8 Lumia 925. This pretty clearly shows that from a consumer perspective, there really is no practical difference between how these two operating systems look and how you interact with them. For the consumer, your entertainment device (Xbox One), phone (Windows Phone) and mobile computing device (Surface [or some other vendors tablet], laptop, netbook or ultrabook) and your desktop computing device (desktop) will all look and feel the same. While many people will denounce this consistency of user experience, I think this will be a good thing in the long term, especially for the upcoming generations. For example, my 5-year old son knows how to use my tablet, phone and Xbox because they all feature nearly identical user experiences. When Windows 8 was released, Microsoft allowed a Windows Store app to be purchased once and installed on as many as 5 devices. With Windows 8.1, this limit has been increased to over 50. Why is that important? If you consider that your phone, computing devices, and entertainment device will be running the same operating system (with minor differences related to physical hardware chipset), that means that I could potentially purchase my sons favorite Angry Birds game once and be able to install it on all of the devices I own. (And for those of you wondering, it’s only 7 [at the moment].) From an app developer perspective, the story becomes even more compelling. Right now there are differences between the different operating systems, but those differences are shrinking. The user interface technology for both is XAML but there are different controls available and different user experience concepts. Some of the APIs available are the same while some are not. You can’t develop a Windows Phone app that can also run on Windows (either Windows Pro or RT). With each release of Windows Phone and Windows RT, those difference become smaller and smaller. Add to this mix the Xbox One, which will also feature a Windows-based operating system and the same “modern” (tile-based) user interface and the visible distinctions between the operating systems will become even smaller. Unifying the operating systems means one set of APIs and one code base to maintain for an app that can run on multiple devices. One code base means it’s easier to add features and fix bugs and that those changes become available on all devices at the same time. It also means a single app store, which will increase the discoverability and reach of your app and consolidate revenue and app profile management. Now, the choice of what devices an app is available on becomes a simple checkbox decision rather than a technical limitation. Ultimately, this means more apps available to consumers, which is always good for the app ecosystem. Is all of this just rumor, speculation and conjecture? Of course, but it’s not unfounded. As I mentioned earlier, some of the prominent Microsoft watchers are also reporting similar rumors. However, Microsoft itself has even hinted at this future with their recent organizational changes and by telling developers “if you want to develop for Xbox One, start developing for Windows 8 now.” I think this pretty clearly paints the following picture: Microsoft is committed to the “modern” user interface paradigm. Microsoft is changing their release cadence (for all products, not just operating systems) to be faster and more modular. Microsoft is going to continue to unify their OS platforms both from a consumer perspective and a developer perspective. While this direction will certainly concern some people it will excite many others. Microsoft’s biggest failing has always been following through with a strong and sustained marketing strategy that presents a consistent view point and highlights what this unified and connected experience looks like and how it benefits consumers and enterprises. We’ve started to see some of this over the last few years, but it needs to continue and become more aggressive and consistent. In the long run, I think Microsoft will be able to pull all of these technologies and devices together into one seamless ecosystem. It isn’t going to happen overnight, but my prediction is that we will be there by the end of 2016. As both a consumer and a developer, I, for one, am excited about the future of Microsoft.

Read the article

If Nvidia Shield can stream a game via WiFi (~150-300Mbps), where is the 1-10Gbps wired streaming?

- by Enigma

Facts: It is surprising and uncharacteristic that a wireless game streaming solution is the *first to hit the market when a 1000mbps+ Ethernet connection would accomplish the same feat with roughly 6x the available bandwidth. 150-300mbps WiFi is in no way superior to a 1000mbps+ LAN connection aside from well wireless mobility. Throughout time, (since the internet was created) wired services have **always come first yet in this particular case, the opposite seems to be true. We had wired internet first, wired audio streaming, and wired video streaming all before their wireless counterparts. Why? Largely because the wireless bandwidth was and is inferior. Even today despite being significantly better and capable of a lot more, it is still inferior to a wired connection. Situation: Chief among these is that NVIDIA’s Shield handheld game console will be getting a microconsole-like mode, dubbed “Shield Console Mode”, that will allow the handheld to be converted into a more traditional TV-connected console. In console mode Shield can be controlled with a Bluetooth controller, and in accordance with the higher resolution of TVs will accept 1080p game streaming from a suitably equipped PC, versus 720p in handheld mode. With that said 1080p streaming will require additional bandwidth, and while 720p can be done over WiFi NVIDIA will be requiring a hardline GigE connection for 1080p streaming (note that Shield doesn’t have Ethernet, so this is presumably being done over USB). Streaming aside, in console mode Shield will also support its traditional local gaming/application functionality. - http://www.anandtech.com/show/7435/nvidia-consolidates-game-streaming-tech-under-gamestream-brand-announces-shield-console-mode ^ This is not acceptable to me for a number of reasons not to mention the ridiculousness of having a little screen+controller unit sitting there while using a secondary controller and screen instead. That kind of redundant absurdity exemplifies how wrong of a solution that is. They need a second product for this solution without the screen or controller for it to make sense... at which point your just buying a little computer that does what most other larger computers do better. While this secondary project will provide a wired connection, it still shouldn't be necessary to purchase a Shield to have this benefit. Not only this but Intel's WiDi claims game streaming support as well - wirelessly. Where is the wired streaming? All that is required, by my understanding, is the ability to decode H.264 video compression and transmit control/feedback so by any logical comparison, one (Nvidia especially) should have no difficulty in creating an application for PC's (win32/64 environment) that does the exact same thing their android app does. I have 2 video cards capable of streaming (encoding) H.264 so by right they must be capable of decoding it I would think. I should be able to stream to my second desktop or my laptop both of which by hardware comparison are superior to the Shield. I haven't found anything stating plans to allow non-shield owners to do this. Can a third party create this software or does it hinge on some limitation that only Nvidia can overcome? Reiteration of questions: Is there a technical reason (non marketing) for why Nvidia opted to bottleneck the streaming service with a wireless connection limiting the resolution to 720p and introducing intermittent video choppiness when on a wired connection one could achieve, presumably, 1080p with significantly less or zero choppiness? Is there anything limiting developers from creating a PC/Desktop application emulating the same H.264 decoding functionality that circumvents the need to get an Nvidia Shield altogether? (It is not a matter of being too cheap to support Nvidia - I have many Nvidia cards that aren't being used. One should not have to purchase specialty hardware when = hardware already exists) Same questions go for Intel Widi also. I am just utterly perplexed that there are wireless live streaming solution and yet no wired. How on earth can wireless be the goto transmission medium? Is there another solution that takes advantage of H.264 video compression allowing live streaming over a wired connection? (*) - Perhaps this isn't the first but afaik it is the first complete package. (**) - I cant back that up with hard evidence/links but someone probably could. Edit: Maybe this will be the solution I am looking for but I still find it hard to believe that they would be the first and after wireless solutions already exist. In-home Streaming You can play all your Windows and Mac games on your SteamOS machine, too. Just turn on your existing computer and run Steam as you always have - then your SteamOS machine can stream those games over your home network straight to your TV! - http://store.steampowered.com/livingroom/SteamOS/

Read the article

CodePlex Daily Summary for Friday, June 11, 2010

CodePlex Daily Summary for Friday, June 11, 2010New ProjectsBIxPress Community Edition: SSIS Toolset BIDS Addin,Audit,Notify,Deploy,Template: BI xPress is a BIDS Addin/standalone application for SQL Developer/DBA. This tool has many features including Auditing, Notification, Deployment, P...C# Shell (cash): Cash is a command-line interpreter (shell), written in C#. It is part of an project to produce tools which replace the traditional GNU/Linux user-l...Chernarus Life Revivved: Chernarus life revivved for arma 2 multiplayerDKAL: DKAL is a distributed authorization policy language. This project contains an engine for running DKAL policies. It is implemented primarly in F#.ImageResizer for Albulle: Application permettant de déployer le contenu pour une la galerie photos php Albulle. L'objectif est de faciliter et automatiser le redimensionnem...Intraweb Active Directory Authentication Demo: A simple demo created using Delphi 7 and Intraweb 9.0.42 with the Active Directory Helper interface to authenticate a user to Active Directory. ...Lokad CQRS - build scalable web sites and enterprise solutions on Windows Azure: Lokad CQRS helps to build scalable cloud applications for Windows Azure. It provides time-proven guidance and .NET Application Blocks to help arc...LRS: Write a concise, reader-focused summary. Write a concise, reader-focused summary. Write a concise, reader-focused summary. ManagementPeople99: ...MEDILIG - MEDICAL LIFE GUARD: Cross-platform EHR/EMR software for the design, implementation and use of autonomous, open database models for multilingual clinical data managemen...NETris - ASP .NET, AJAX, Web Service based Tetris Game: Tetris game with business logic provided via Web Services.Peace Through Force: Peace Through Force is a 2D side scrolling tactical shooter developed in XNA Game Studio 3.1 using C#. The game is targeted to be made available o...Powwa: Util to show battery status and cpu speed on laptop. Uses jWMI's for interfacing with Windows' WMI.Resource Management System: Resource Management system for Internal purpose using WPF,WCF and SilverlighttChat - ASP.NET, Ajax & Web Service based Chat Room: Simple chat room application. Technology: ASP .NET, Ajax, Web Services and MS SQL Server Database. Uses ASP .NET authentication mechanism.Test Project (ignore): This is used to demonstrate CodePlex at meetings. Please ignore this project.Transform Config: Transfom Config lets you use the new configuration transformation feature in Visual Studio 2010 without performing a publish on a web application p...unsocialcity: trying to make a game for facebook called <projectname> - just seemed like a fun idea http://apps.facebook.com/unsocialcityVorbisPlayer: VorbisPlayer is the audio user control for Silverlight games. It plays loop-sets seamless, it solves the short sound problem, and it can play sound...New ReleasesA Guide to Parallel Programming: Drop 5 - Guide Preface, Chapters 1 - 7, and code: This is Drop 5 with Guide Preface, Chapters 1 - 7, Appendix B, Glossary, and References, and the accompanying code samples. This drop requires Visu...CC.Hearts Screen Saver: CC.Hearts Screen Saver 1.0.10.610: The third release of CC.Hearts Screen Saver. Key features are: Further performance enhancements Keyboard commands (Press ? for help) Help Popu...Fiddler Delayed Responses Extension: v1 beta: UI improvement . drag and drop . session markers . icons . layout Algorithm review . Performance issues Thanks to Eric Lawrence for his ideas.FontViewer 2010: FontViewer 2010 (Codename Eraser): This is the installer for the development version ("Eraser") of FontViewer 2010. Because many of the features are under development, functionality...Genuilder: Genuilder 1.2: First release of Genuilder.Extensibility.ImageResizer for Albulle: ImageResizer1.0-bin: Première version. Permet de déployer des images dans un système de fichier (local).imdb movie downloader: myImdb 0.9.5: myImdb 0.9.5KooBoo Image Gallery: Beta 4: This new version has a new example using s3slider script http://www.serie3.info/s3slider/demonstration.html thanks to mshimao Now there are two pl...LogikBug's IoC Container: LogikBug's IoC Container v1.1.1: In this release: I extended the Extensibility namespace. Fixed a few minor issues with the Extensibility namespace.LRS: jlrs: asdfaLRS: jlrs src: jlrs srcMiniTwitter: 1.14: MiniTwitter 1.14 更新内容修正リストのインポートをキャンセルしてもタイムラインの名前がリストの名前になるバグを修正 OAuth の承認を取り消した後、再ログインできないバグを修正インポートするリストを選択せずにインポートをクリックすると落ちるバグを修正追加 ...NETris - ASP .NET, AJAX, Web Service based Tetris Game: NETris - Source Code and Documentation: Fully functional prototype. Please note that documentation is written in the form of a report as the project was an assignment at Coventry University.Object/Relational Mapper & Code Generator in Net 2.0 for Relational & XML Schema: 2.10: Minor release, incremental changes to sample website and UI templates.Opalis Community Releases: Integration Pack for Standard OIS Logging: The Integration Pack for Standard OIS Logging provides extended Policy Logging functions to OIS and MSSQL. This Integration Pack adds the followin...PicassoCms: 0.6: More intuitive UI, new controlsPowerAuras: PowerAuras-3.0.0K-beta2: New Auras: Item Name Equipment Slot Tracking Changes from beta1 5 new aura textures Fixed Tracking bug Added graphical equipment slot sele...PowerPivot Sample Data: PowerPivot for Excel Tutorial Sample Data-v.2: The PowerPivot Tutorial Sample Data-Version 2 download includes a variety of data sources that you can use to complete the tutorial in the PowerPiv...Powwa: First build: Unpack & built with NetBean 6.8Quick Performance Monitor: Version 1.4: Added functionality to add and remove performance counters at run time. Also added saving and loading to file so sets of performance counters can b...Resonance: TrainNode Client Library: Libraries to access the TrainNode ServiceSharePoint 2010 Taxonomy Import Utility: TaxonomyBuilder Version 1.0.2: New Features Added support for additional term labels per term Added support for Term Set Owners Added support for Term Set stakeholders Upda...Silverlight for Umbraco Media Objects (SUMO): Community Tech Preview: The CTP for SUMO is now live, feedback appreciated!Silverlight Reporting: Initial Release: This is the first release of the code. It includes the source code from Pete's blog post article on Silverlight reporting.Simple.NET: Simple.Mocking 1.0.0.7: Initial version of a new mocking framework for .NET Revision 1: Expect.AnyInocationOn<T>(T target) changed to Expect.AnyInocationOn(object target...Smart Voice: Smart Voice 0.2.2: Changelog: Fixed more bugs Added a readme into the archiveSoulHackers Demon Unite(Chinese version): WPFClient pre alpha 2: pre alpha 2, need your feedbackSquiggle - A Free open source Lan Messenger: Squiggle 1.5: File Transfer capability added (With drag/drop support) Message text box maintains history of last 10 messages and you can retrieve them by CTRL+U...SSIS Expression Editor & Tester: Expression Editor and Tester v1.0.1.0: Minor updated release of expression editor tool and editor control. Download and extract the files to get started, no install required. Changes Si...StreamInsight Samples: GregLow HighwayMonitor Samples: Initial Upload of GregLow HighwayMonitor StreamInsight samples. These samples are used in the upcoming free eClinic for StreamInsight and have been...tChat - ASP.NET, Ajax & Web Service based Chat Room: tChat Source Code and Documentation: Functional prototype. T-SQL scripts can be found in the SQL folder. Please note that the documentation is written in a format of a report for a "du...Transform Config: Initial Release: This is the initial release of the project. It's all been thrown together quickly so it's lacking error handling etc, but it's still fully function...UrzaGatherer: UrzaGatherer v2.0.2: Integrate the support of SQL Server Compact Edition 3.5 SP2 for a better portability.Value Injecter: map anything to anything anyway you might imagine: ValueInjecter 1.9: Features map anything to anything flattening unflattening includes sample projects for: asp.net mvc asp.net web-forms win-formsVCC: Latest build, v2.1.30610.0: Automatic drop of latest buildVisual Studio DSite: Picture SlideShow Viewer (Visual C++ 2008): A picture slidershow viewer.VorbisPlayer: VorbisPlayer: The first release of the Silverlight VorbisPlayer, including source code and example files.WCF 4 Templates for Visual Studio 2010: AnonymousOverHttps Template: Produces a WCF service application configured for anonymous calls over HTTPS/SSL. Supplies a BasicHttpBinding default configured for Transport secu...Most Popular ProjectsHaoRan_TokyoTyrantClient.NET Transactional File ManagerSOLID by exampleMemetic NPC Behavior ToolkitSharpotify - Spotify .Net LibraryWCF 4 Templates for Visual Studio 2010SFTP Component for .NET CSharp, VB.NET, and ASP.NETUltimate FTP Component for .NET C#, VB.NET and ASP.NETAnurag Pallaprolu's Code RepositoryBigfootMVCMost Active ProjectsCommunity Forums NNTP bridgejQuery Library for SharePoint Web ServicesRhyduino - Arduino and Managed Codepatterns & practices – Enterprise LibraryNB_Store - Free DotNetNuke Ecommerce Catalog ModuleCassandraemonBlogEngine.NETMediaCoder.NETAndrew's XNA HelpersStyleCop

Read the article

ASP.NET MVC 2 throws exception for ‘favicon.ico’

- by nmarun

I must be on fire or something – third blog in 2 days… awesome! Before I begin, in case you’re wondering, favicon.ico is the small image that appears to the left of your web address, once the page loads. In order to learn more about MVC or any thing for that matter, it’s better to look at the source itself. Since MVC is open source (at least some part of it is), I started looking at the source code that’s available for download. While doing so, I hit Steve Sanderson’s blog site where he explains in great detail the way to debug your app using ASP.NET MVC source code. For those who are not aware, Steve Sanderson’s book - Pro ASP.NET MVC Framework, is one of the best books to learn about MVC. Alrighty, I followed the article and I hit F5 to debug the default / unchanged MVC project. I put a breakpoint in the DefaultControllerFactory.cs, CreateController() method. To know a little more about this class and the method, read this. Sure enough, the control stopped at the breakpoint and I hit F5 again and the page rendered just fine. But then what’s this? The breakpoint was hit again, as if something else was being requested. I now hovered my mouse over the ‘controllerName’ parameter and it says – favicon.ico. This by itself was more than enough for me to raise my eye-brows, but what happened next just took the ground below my feet. Oh, oh, I’m sorry I’m just typing, no code, no image, so here are a couple of screen captures. The first one shows the request for the Home controller; I get ‘Home’ when I hover over the parameter: And here’s the one that shows the same for call for ‘favicon.ico’. So, I step through the code and when the control reaches line 91 – GetControllerInstance() method, I step in. This is when I had the ‘ground-losing’ experience. Wow, an exception is being thrown for this file and that too in RTM. For some reason MVC thinks, this as a controller and tries to run it through the MvcHandler and it hits this snag. So it seems like this will happen for any MVC 2 site and this did not happen for me in the previous version of MVC. Before I get to how to resolve it, here’s another way of reproducing this exception. Revert back all your changes that you did as mentioned in Steve’s blog above. Now, add a class to your MVC project and call it say, MyControllerFactory and let this inherit from DefaultControllerFactory class. (Read this for details on the DefaultControllerFactory class is and how it is used in a different context). Add an override for the CreateController() method and for the sake of this blog, just copy the same content from the DefaultControllerFactory class. The last step is to tell your MVC app to use the MyControllerFactory class instead of the default one. To do this, go to your Global.asax.cs file and add line 6 of the snippet below: 1: protected void Application_Start() 2: { 3: AreaRegistration.RegisterAllAreas(); 4: 5: RegisterRoutes(RouteTable.Routes); 6: ControllerBuilder.Current.SetControllerFactory(new MyControllerFactory()); 7: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now, you’re ready to reproduce the issue. Just F5 the project and when you hit the overridden CreateController() method for the second time, this is what it looks like for me: And continuing further gives me the same exception. I believe this is something that MS should fix, as not having ‘favicon.ico’ file will be common for most of the applications. So I think the when you create an MVC project, line 6 should be added by default by Visual Studio itself: 1: public class MvcApplication : System.Web.HttpApplication 2: { 3: public static void RegisterRoutes(RouteCollection routes) 4: { 5: routes.IgnoreRoute("{resource}.axd/{*pathInfo}"); 6: routes.IgnoreRoute("favicon.ico"); 7: 8: routes.MapRoute( 9: "Default", // Route name 10: "{controller}/{action}/{id}", // URL with parameters 11: new { controller = "Home", action = "Index", id = UrlParameter.Optional } // Parameter defaults 12: ); 13: } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } There it is, that’s the solution to avoid the exception altogether. I tried this both IE8 and Firefox browsers and was able to successfully reproduce the error. Hope someone will look at this issue and find a fix. Just before I finish up, I found another ‘bug’, if you want to call it, with Visual Studio 2008. Remember how you could change what browser you want your application to run in by just right clicking on the .aspx file and choosing ‘Browse with…’? Seems like that’s missing when you’re working with an MVC project. In order to test the above bug in the other browser, I had to load a classic ASP.NET project, change the settings and then run my MVC project. Felt kinda ‘icky’, for lack of a better word.

Read the article

XNA 2D Collision with specific tiles

- by zenzero

I am new to game programming and to these sites for help. I am making a 2D game but I can't seem to get the collision between my character and certain tiles. I have a map filled with grass tiles and water tiles and I want to keep my character from walking on the water tiles. I have a Tiles class that I use so that the tiles are objects and also has the collision method in it, a TileEngine class used create the map and it also holds a list of Tiles, and the class James which is for my character. I also have a Camera class that centers the camera on my character if that has anything to do with the problem. The character's movement is intended to be restricted to 4 directions(up, down, left, right). As an extra note, the bottom right water tile does have collision, but the collision does not occur for any of the other water tiles. Here is my TileEngine class using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace Test2DGame2 { class TileEngine : Microsoft.Xna.Framework.Game { //makes a list of Tiles objects public List<Tiles> tilesList = new List<Tiles>(); public TileEngine() {} public static int tileWidth = 64; public static int tileHeight = 64; public int[,] map = { {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, {0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, {0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 0, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 1, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,}, }; public void drawMap(SpriteBatch spriteBatch) { for (int y = 0; y < map.GetLength(0); y++) { for (int x = 0; x < map.GetLength(1); x++) { //make a Rectangle tilesList[map[y, x]].rectangle = new Rectangle(x * tileWidth, y * tileHeight, tileWidth, tileHeight); //draw the Tiles objects spriteBatch.Draw(tilesList[map[y, x]].texture, tilesList[map[y, x]].rectangle, Color.White); } } } } } Here is my Tiles class using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace Test2DGame2 { class Tiles { public Texture2D texture; public Rectangle rectangle; public Tiles(Texture2D texture) { this.texture = texture; } //check to see if james collides with the tile from the right side public void rightCollision(James james) { if (james.GetBounds().Intersects(rectangle)) { james.position.X = rectangle.Left - james.front.Width; } } } } I have a method for rightCollision because I could only figure out how to get the collisions from specifying directions. and here is the James class for my character using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace Test2DGame2 { class James { public Texture2D front; public Texture2D back; public Texture2D left; public Texture2D right; public Vector2 center; public Vector2 position; public James(Texture2D front) { position = new Vector2(0, 0); this.front = front; center = new Vector2(front.Width / 2, front.Height / 2); } public James(Texture2D front, Vector2 newPosition) { this.front = front; position = newPosition; center = new Vector2(front.Width / 2, front.Height / 2); } public void move(GameTime gameTime) { KeyboardState keyboard = Keyboard.GetState(); float SCALE = 20.0f; float speed = gameTime.ElapsedGameTime.Milliseconds / 100.0f; if (keyboard.IsKeyDown(Keys.Up)) { position.Y -=speed * SCALE; } else if (keyboard.IsKeyDown(Keys.Down)) { position.Y += speed * SCALE; } else if (keyboard.IsKeyDown(Keys.Left)) { position.X -= speed * SCALE; } else if (keyboard.IsKeyDown(Keys.Right)) { position.X += speed * SCALE; } } public void draw(SpriteBatch spriteBatch) { spriteBatch.Draw(front, position, null, Color.White, 0, center, 1.0f, SpriteEffects.None, 0.0f); } //get the boundingbox for James public Rectangle GetBounds() { return new Rectangle( (int)position.X, (int)position.Y, front.Width, front.Height); } } }

Read the article

CodePlex Daily Summary for Sunday, July 01, 2012

CodePlex Daily Summary for Sunday, July 01, 2012Popular ReleasesEnterprise Library 5 Caching with ProtoBuf.NET: Initial Release: This is the initial version, which includes zipped up sourcecode????: ????2.0.3: 1、???????????。 2、????????。 3、????????????。 4、bug??，????。Apworks: Apworks (v2.5.4563.21309, 30JUN2012): Installation Prerequisites: 1. Microsoft .NET Framework 4.0 SP1 2. Microsoft Visual Studio 2010 SP1 3. Other required libraries & assemblies are now included in the installation package so no more prerequisites needed Functional Updates: 1. Refactor the identity field of the IEntity interface from 'Id' to 'ID' 2. Changed the MySql Storage to use the MySql NetConnector version 6.4.4. 3. Implemented the paging support for the repositories. 4. Added the Eager Loading Property specification t...Turing Machine Simulator in C#: TuringMachineSimulator 1.0 Setup: Initial release.RESTester: First version: First beta release that contain following features: - specify http method - specify content type - specify url - specify custom headers - make request - see request result in plain text, XML, JSON, WEB form - save request to DB - load request from DB - delete request from DBScreen Mate: ScreenMate17551.7z: ScreenMate17551.7z - Full Source StarTrek.exe - Just the exe for USSExcelsiorNCC-2000myManga: myManga v1.0.0.6: ChangeLogUpdating from Previous Version: Extract contents of Release - myManga v1.0.0.5.zip to previous version's folder. Replaces: myManga.exe BakaBox.dll CoreMangaClasses.dll Manga.dll Plugins/MangaReader.manga.dll Plugins/MangaFox.manga.dll Plugins/MangaHere.manga.dll Plugins/MangaPanda.manga.dllMagelia WebStore Open-source Ecommerce software: Magelia WebStore 2.0: User Right Licensing ContentType version 2.0.267.1Supporting Guidance and Whitepapers: v1 - Supporting Media: Welcome to the Release Candidate (RC) release of the ALM Rangers Readiness supporting edia As this is a RC release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these RC artifacts in a production environment. Quality-Bar Details All critical bugs have been resolved Known Issues / Bugs Practical Ruck training workshop not yet includedDesigning Windows 8 Applications with C# and XAML: Chapters 1 - 7 Release Preview: Source code for all examples from Chapters 1 - 7 for the Release PreviewMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.57: Fix for issue #18284: evaluating literal expressions in the pattern c1 * (x / c2) where c1/c2 is an integer value (as opposed to c2/c1 being the integer) caused the expression to be destroyed.Visual Studio ALM Quick Reference Guidance: v2 - Visual Studio 2010 (Japanese): Rex Tang (?? ??) http://blogs.msdn.com/b/willy-peter_schaub/archive/2011/12/08/introducing-the-visual-studio-alm-rangers-rex-tang.aspx, Takaho Yamaguchi (?? ??), Masashi Fujiwara (?? ??), localized and reviewed the Quick Reference Guidance for the Japanese communities, based on http://vsarquickguide.codeplex.com/releases/view/52402. The Japanese guidance is available in AllGuides and Everything packages. The AllGuides package contains guidances in PDF file format, while the Everything packag...Visual Studio Team Foundation Server Branching and Merging Guide: v1 - Visual Studio 2010 (Japanese): Rex Tang (?? ??) http://blogs.msdn.com/b/willy-peter_schaub/archive/2011/12/08/introducing-the-visual-studio-alm-rangers-rex-tang.aspx, Takaho Yamaguchi (?? ??), Hirokazu Higashino (?? ??), localized and reviewed the Branching Guidance for the Japanese communities, based on http://vsarbranchingguide.codeplex.com/releases/view/38849. The Japanese guidance is available in AllGuides and Everything packages. The AllGuides package contains guidances in PDF file format, while the Everything packag...SQL Server FineBuild: Version 3.1.0: Top SQL Server FineBuild Version 3.1.0This is the stable version of FineBuild for SQL Server 2012, 2008 R2, 2008 and 2005 Documentation FineBuild Wiki containing details of the FineBuild process Known Issues Limitations with this release FineBuild V3.1.0 Release Contents List of changes included in this release Please DonateFineBuild is free, but please donate what you think FineBuild is worth as everything goes to charity. Tearfund is one of the UK's leading relief and de...EasySL: RapidSL V2: Rewrite RapidSL UI Framework, Using Silverlight 5.0 EF4.1 Code First Ria Service SP2 + Lastest Silverlight Toolkit.SOLID by example: All examples: All solid examplesSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.1.1726.406): Use of new version of connection controls for a full support of OSDP authentication mechanism for CRM Online.Umbraco CMS: Umbraco CMS 5.2: Development on Umbraco v5 discontinued After much discussion and consultation with leaders from the Umbraco community it was decided that work on the v5 branch would be discontinued with efforts being refocused on the stable and feature rich v4 branch. For full details as to why this decision was made please watch the CodeGarden 12 Keynote. What about all that hard work?!?? We are not binning everything and it does not mean that all work done on 5 is lost! we are taking all of the best and m...CodeGenerate: CodeGenerate Alpha: The Project can auto generate C# code. Include BLL Layer、Domain Layer、IDAL Layer、DAL Layer. Support SqlServer And Oracle This is a alpha program,but which can run and generate code. Generate database table info into MS WordXDA ROM HUB: XDA ROM HUB v0.9: Kernel listing added -- Thanks to iONEx Added scripts installer button. Added "Nandroid On The Go" -- Perform a Nandroid backup without a PC! Added official Android app!New ProjectsAdventureWorks Portal: This project will serve as a demonstration of web-based composite application using HTML 5 (with JSRender), ASP.NET MVC 4, Unity, and Entity Framework.Arkalia Core: Basic vD1.29.1 emulatorBooncraft: This project is a launcher for minecraft that loads and updates the BoonCraft mod pack. See 352n.dyndns.org for more info on BoonCraft.CloudWebSiteDemo: Windows Azure demo codeComputer Mayhem: Computer Mayhem is a growing collection of computer related add-ons for Mayhem.CSharp Extensions: Piccolo insieme di estensioni alla libreria standard di C#D3MediaLib: Diablo 3 Media LibraryEpub Editor: A simple epub editor that allows you to make quick changes to epub source files.IpScanner: The IpScanner windows application should help discovering hosts in a ip based network. The project is written in C#jQuery UI Script# Import Library: This library allows you to develop C# code against the jQueryUI API. This library is a Script# import library with definitions for the jQueryUI v1.8.21 API.Mayhem KeyLogger: The reaction module created allows for a given user to write text to a given file. When enough mappings between Key Press Events and my reaction module, the MayMayhem Keypress Module: The Mayhem Keypress Module was written as a reaction module for the purpose of simulating a keypress. Given an event, a certain key will be pressed in reaction.mIP - A C# Managed TCP/IP Stack for .NET Micro Framework: A fully managed TCP/IP stack for .NET MicroFramework with the primary purpose of enabling web servers. Local Name Resolution for Windows and iOS is automatic!OL 2012 Mayhem: OL 2012 Mayhem is a collection of OL 2012 related add-ons for Mayhem.PHP Code Model: A PHP class library that abstracts PHP language constructs with the goal is to facilitate automated PHP code generationQTalk: QChat, using Gtalk technologyreal date & time for command mode in windows OS: This is a console application to output date and time in specified format in Windows OS both 32 and 64 bits.RESTester: Help to create web requests with all needed customization. Available possibility to save any request to database and in any time recover it.Screen Mate: This project is an open source Visual Studio 2010 C# WinForms screen mate template. As a Star Trek fan (Trekee) my first screen mate will be starships.Sensor Mayhem: Sensor Mayhem is a growing collection of sensor and location related add-ons for Mayhem.SharpTFTP: TFTP server/client lib for .Net/C# (v3.5) implementing RFC1350 The TFTP Protocol (Revision 2), RFC2347 TFTP Option Extension and RFC 2348 TFTP Blocksize Option.Turing Machine Simulator in C#: Turing machine simulator simulates the working of Turing machine. Turing machine is used to study model of computation. Twilio Mayhem: Twilio Mayhem is a growing collection of Twilio related add-ons for Mayhem.Vimeo API for Metro and Windows Runtime: This library helps you to easily access the Vimeo Advanced API from your Metro style applications. It is based on the VimeoDotNet code, and supports Upload API.?????????? ?????: ?????????? ????? ?????????? ? ?????????????? ????????? ??????? ?????????????????? ? ????????? ???????

Read the article

How I Work: A Cloud Developer's Workstation

- by BuckWoody

I've written here a little about how I work during the day, including things like using a stand-up desk (still doing that, by the way). Inspired by a Twitter conversation yesterday, I thought I might explain how I set up my computing environment. First, a couple of important points. I work in Cloud Computing, specifically (but not limited to) Windows Azure. Windows Azure has features to run a Virtual Machine (IaaS), run code without having to control a Virtual Machine (PaaS) and use databases, video streaming, Hadoop and more (a kind of SaaS for tech pros). As such, my designs run the gamut of on-premises, VM's in the Cloud, and software that I write for a platform. I focus on data primarily, meaning that I design a lot of systems that use an RDBMS (like SQL Server or Windows Azure Databases) or a NoSQL approach (MongoDB on Azure or large-scale Key-Value Pairs in Table storage) and even Hadoop and R, and also Cloud Numerics in F#. All that being said, those things inform my choices below. Hardware I have a Lenovo X220 tablet/laptop which I really like a great deal - it's a light, tough, extremely fast system. When I travel, that's the system I take. It has 8GB of RAM, and an SSD drive. I sometimes use that to develop or work at a client's site, on the road, or in the living room when I'm not in my home office. My main system is a GateWay DX430017 - I've maxed it out on RAM, and I have two 1TB drives in it. It's not only my workstation for work; I leave it on all the time and it streams our videos, music and books. I have about 3400 e-books, and I've just started using Calibre to stream the library. I run Windows 8 on it so I can set up Hyper-V images, since Windows Azure allows me to move regular Hyper-V disks back and forth to the Cloud. That's where all my "servers" are, when I have to use an IaaS approach. The reason I use a desktop-style system rather than a laptop only approach is that a good part of my job is setting up architectures to solve really big, complex problems. That means I have to simulate entire networks on-premises, along with the Hybrid Cloud approach I use a lot. I need a lot of disk space and memory for that, and I use two huge monitors on my stand-up desk. I could probably use 10 monitors if I had the room for them. Also, since it's our home system as well, I leave it on all the time and it doesn't travel. Software For the software for my systems, it's important to keep in mind that I not only write code, but I design databases, teach, present, and create Linux and other environments. Windows 8 - While the jury is out for me on the new interface, the context-sensitive search, integrated everything, and speed is just hands-down the right choice. I've evaluated a server OS, Linux, even an Apple, but I just am not as efficient on those as I am with Windows 8. Visual Studio Ultimate - I develop primarily in .NET (C# and F# mostly) and I use the Team Foundation Server in the cloud, and I'm asked to do everything from UI to Services, so I need everything. Windows Azure SDK, Windows Azure Training Kit - I need the first to set up my Azure PaaS coding, and the second has all the info I need for PaaS, IaaS and SaaS. This is primarily how I get paid. :) SQL Server Developer Edition - While I might install Oracle, MySQL and Postgres on my VM's, the "outside" environment is SQL Server for an RDBMS. I install the Developer Edition because it has the same features as Enterprise Edition, and comes with all the client tools and documentation. Microsoft Office - Even if I didn't work here, this is what I would use. I've just grown too accustomed to doing business this way to change, so my advice is always "use what works", and this does. The parts I use are: OneNote (and a Math Add-in) - I do almost everything - and I mean everything in OneNote. I can code, do high-end math, present, design, collaborate and more. All my notebooks are on my Skydrive. I can use them from any system, anywhere. If you take the time to learn this program, you'll be hooked. Excel with PowerPivot - Don't make that face. Excel is the world's database, and every Data Scientist I know - even the ones where I teach at the University of Washington - know it, use it, and love it. Outlook - Primary communications, CRM and contact tool. I have all of my social media hooked up to it, so when I get an e-mail from you, I see everything, see all the history we've had on e-mail, find you on a map and more. Lync - I was fine with LiveMeeting, although it has it's moments. For me, the Lync client is tres-awesome. I use this throughout my day, present on it, stay in contact with colleagues and the folks on the dev team (who wish I didn't have it) and more. PowerPoint - Once again, don't make that face. Whenever I see someone complaining about PowerPoint, I have 100% of the time found they don't know how to use it. If you suck at presenting or creating content, don't blame PowerPoint. Works great on my machine. :) Zoomit - Magnifier - On Windows 7 (and 8 as well) there's a built-in magnifier, but I install Zoomit out of habit. It enlarges the screen. If you don't use one of these tools (or their equivalent on some other OS) then you're presenting/teaching wrong, and you should stop presenting/teaching until you get them and learn how to show people what you can see on your tiny, tiny monitor. :) Cygwin - Unix for Windows. OK, that's not true, but it's mostly that. I grew up on mainframes and Unix (IBM and HP, thank you) and I can't imagine life without sed, awk, grep, vim, and bash. I also tend to take a lot of the "Science" and "Development" and "Database" packages in it as well. PuTTY - Speaking of Unix, when I need to connect to my Linux VM's in Windows Azure, I want to do it securely. This is the tool for that. Notepad++ - Somewhere between torturing myself in vim and luxuriating in OneNote is Notepad++. Everyone has a favorite text editor; this one is mine. Too many features to name, and it's free. Browsers - I install Chrome, Firefox and of course IE. I know it's in vogue to rant on IE, but I tend to think for myself a great deal, and I've had few (none) problems with it. The others I have for the haterz that make sites that won't run in IE. Visio - I've used a lot of design packages, but none have the extreme meta-data edit capabilities of Visio. I don't use this all the time - it can be rather heavy, but what it does it does really well. I also present this way when I'm not using PowerPoint. Yup, I just bring up Visio and diagram away as I'm chatting with clients. Depending on what we're covering, this can be the right tool for that. Tweetdeck - The AIR one, not that new disaster they came out with. I live on social media, since you, dear readers, are my cube-mates. When I get tired of you all, I close Tweetdeck. When I need help or someone needs help from me, or if I want to see a picture of a cat while I'm coding, I bring it up. It's up most all day and night. Windows Media Player - I listen to Trance or Classical when I code, and I find music managers overbearing and extra. I just use what comes in the box, and it works great for me. R - F# and Cloud Numerics now allows me to load in R libraries (yay!) and I use this for statistical work on big data loads. Microsoft Math - One of the most amazing, free, rich, amazing, awesome, amazing calculators out there. I get the 64-bit version for quick math conversions, plots and formula-checks. Python - I know, right? Who knew that the scientific community loved Python so much. But they do. I use 2.7; not as much runs with 3+. I also use IronPython in Visual Studio, or I edit in Notepad++ Camstudio recorder - Windows PSR - In much of my training, and all of my teaching at the UW, I need to show a process on a screen. Camstudio records screen and voice, and it's free. If I need to make static training, I use the Windows PSR tool that's built right in. It's ostensibly for problem duplication, but I use it to record for training. OK - your turn. Post a link to your blog entry below, and tell me how you set your system up.

Read the article

Drivers for NVIDIA 520M not working in Ubuntu 12.04

- by Don

I am aware that this is nominally a duplicate question, however I've read the other questions and haven't been able to resolve my problem after many hours and attempts, so please don't delete it. Additionally, it seems like many answers to the other questions are specifically dependent on certain situations. My situation being different from the others I found represented, here's my question. Until last night, I had Ubuntu 12.04 installed with Wubi, and it ran ok, though slowly and with occasional hangs. So I partitioned the drive and installed 12.04 in its own partition. Now when I start it, I am stuck using 2D. I believe this is an NVIDIA bug. My NVIDIA card is a GT 520M and my machine has Optimus. Additional Drivers only displays my wireless driver. Going to System Settings Details Graphics shows Driver:Unknown, Experience:Standard. I downloaded the driver from the NVIDIA website, and ran the installer with no errors, except that the "distribution-provided pre-install script failed". After rebooting, my screen was stuck at 640X480, which was fixed by editing /etc/X11/xorg.conf However, I still was stuck in 2D, and nothing else had changed either. A thread suggested something called Bumblebee. I tried that, and when I ran optirun firefoxI got a frozen blank screen. Following another suggestion, I checked the BIOS to try and disable Optimus. I found and ran myriad other commands to try and fix the problem and nothing changed. Now I have just done a clean re-install of Ubuntu. From there, I: Installed all the updates Downloaded the NVIDIA driver Installed it Got screen stuck at 640X480, fixed in xorg.conf. To recap the problem: I can't get the NVIDIA drivers working I am stuck using 2D I'm an idiot I think if the first one is solved, the solution to the second will naturally follow. If you need me to provide any other information, I'd be happy to. From what I've seen in other threads, I think this information may help: lsmod: dh@donsMachine:~$ lsmod Module Size Used by nvidia 12353161 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event lib80211_crypt_tkip 17390 0 wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device psmouse 87692 0 serio_raw 13211 0 i915 468745 2 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 drm 242038 3 i915,drm_kms_helper mei 41616 0 i2c_algo_bit 13423 1 i915 mxm_wmi 12979 0 acer_wmi 28418 0 sparse_keymap 13890 1 acer_wmi video 19596 1 i915 wmi 19256 2 mxm_wmi,acer_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp tg3 152032 0 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci lspci -nn | grep VGA dh@donsMachine:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0df7] (rev a1) lshw dh@donsMachine:~$ sudo lshw [sudo] password for dh: donsmachine description: Notebook product: EasyNote TS44HR () vendor: Packard Bell version: V1.12 serial: LXBWZ02017134209D71601 width: 64 bits capabilities: smbios-2.7 dmi-2.7 vsyscall32 configuration: boot=normal chassis=notebook uuid=16FE576B-CA15-11E0-B096-B870F4E51243 *-core description: Motherboard product: SJV50_HR vendor: Packard Bell physical id: 0 version: Base Board Version serial: Base Board Serial Number slot: Base Board Chassis Location *-firmware description: BIOS vendor: Packard Bell physical id: 0 version: V1.12 date: 07/11/2011 size: 1MiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 1b slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 0 serial: 598E126E slot: ChannelA-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM [empty] physical id: 1 slot: ChannelA-DIMM1 *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 2 serial: 159E126C slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: DIMM [empty] physical id: 3 slot: ChannelB-DIMM1 *-cpu description: CPU product: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz vendor: Intel Corp. physical id: 2e bus info: cpu@0 version: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz slot: CPU1 size: 2GHz capacity: 4GHz width: 64 bits clock: 1333MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 30 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache:1 description: L2 cache physical id: 31 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L3 cache physical id: 32 slot: L3 Cache size: 3MiB capacity: 3MiB capabilities: synchronous internal write-through unified *-cache description: L1 cache physical id: 2f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:d0000000-d10fffff ioport:a0000000(size=301989888) *-display description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) memory:d1000000-d107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:d1400000-d17fffff memory:c0000000-cfffffff ioport:3000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:42 memory:d1a04000-d1a0400f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:d1a0a000-d1a0a3ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d1a00000-d1a03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:9fb00000-9fbfffff ioport:d1800000(size=1048576) *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: b8:70:f4:e5:12:43 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb latency=0 link=no multicast=yes port=twisted pair resources: irq:16 memory:d1830000-d183ffff memory:d1840000-d184ffff memory:d1850000-d18507ff *-generic:0 description: SD Host controller product: NetXtreme BCM57765 Memory Card Reader vendor: Broadcom Corporation physical id: 0.1 bus info: pci@0000:02:00.1 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=sdhci-pci latency=0 resources: irq:17 memory:d1800000-d180ffff *-generic:1 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.2 bus info: pci@0000:02:00.2 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1810000-d181ffff *-generic:2 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.3 bus info: pci@0000:02:00.3 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1820000-d182ffff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d1900000-d19fffff *-network description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 68:a3:c4:44:81:96 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.12 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d1900000-d1903fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:d1a09000-d1a093ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 04 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 04 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:3098(size=8) ioport:30bc(size=4) ioport:3090(size=8) ioport:30b8(size=4) ioport:3060(size=32) memory:d1a08000-d1a087ff *-disk description: ATA Disk product: ST9500325AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0001 serial: S2W1AMSX size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=a45f21e9 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 46aa-2a25 size: 19GiB capacity: 20GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:00 filesystem=ntfs label=PQSERVICE state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 10aa-ad1a size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=SYSTEM RESERVED state=clean *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 668c5afc-182e-ff4b-b084-3cc09f54972d size: 395GiB capacity: 395GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=Don's Machine state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 49GiB capacity: 49GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 3945MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD-RW DVRTD11RS vendor: PIONEER physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d1a06000-d1a060ff ioport:3040(size=32) *-power UNCLAIMED description: OEM_Define1 product: OEM_Define5 vendor: OEM_Define2 physical id: 1 version: OEM_Define6 serial: OEM_Define3 capacity: 75mWh *-battery description: Lithium Ion Battery product: CRB Battery 0 vendor: -Virtual Battery 0- physical id: 2 version: 10/12/2007 serial: Battery 0 slot: Fake

Search Results

Search found 19410 results on 777 pages for 'white screen'.

Page 341/777 | < Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348 | Next Page >

- by MalwareManiac

- by user16441

- by goddamnyouryan

- by Andrew

- by user2900126

- by Reed

- by IDWMaster

- by Reed

- by shiju

- by hajan

- by DigitalGeekery

- by ScottGu

- by Trevor Bekolay

- by GalneGunnar

- by Valter Minute

- by Scott Dorman

- by Enigma

- by nmarun

- by zenzero

- by BuckWoody

- by Don

< Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348 | Next Page >