Search Results

Search found 48324 results on 1933 pages for 'how stuff works'.

Page 342/1933 | < Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >

• "Error: Unknown error" when trying to start virtual machine from VMware server

  - by slhck

  Problem We are running VMware Server 2.0.0 build-116503 on a Ubuntu 10.04 LTS server. There is a virtual machine installed, running Lotus Domino on Windows Server 2003. Ever since a sudden power failure last week, the virtual machine won't properly start up. When I run the command: vmrun -T server -h https://127.0.0.1:8333/sdk -u root -p jk2x2208 start "[standard] lotus/test.vmx" … after 30 seconds it displays: Error: Unknown error That's about everything I get. I know the command is right, since that's what we've used all the time. This has happened last Saturday after a scheduled backup shutdown, and somehow I was able to start it again. This week, it happened again, and I can't get it back up. Occasionally, I also get: Error: Cannot connect to the virtual machine When I get this, and I run the start command, it seemingly works. Why is this so random? Which configuration could have been messed up? What I've tried / other info I already shut down VMware itself with /etc/init.d/vmware stop. This works. I tried to start VMware again with /etc/init.d/vmware start. It complains that it's "not configured", which is why I had to rm /etc/vmware/not_configured, and then try to start again. There have been no software updates on the machine, and no configuration changes

  Read the article

• IIS URl Rewrite working inconsistently?

  - by Don Jones

  I'm having some oddness with the URL rewriting in IIS 7. Here's my Web.config (below). You'll see "imported rule 3," which grabs attempts to access /sitemap.xml and redirects them to /sitemap/index. That rule works great. Right below it is imported rule 4, which grabs attempts to access /wlwmanifest.xml and redirects them to /mwapi/wlwmanifest. That rule does NOT work. (BTW, I do know it's "rewriting" not "redirecting" - that's what I want). So... why would two identically-configured rules not work the same way? Order makes no different; Imported Rule 4 doesn't work even if it's in the first position. Thanks for any advice! EDIT: Let me represent the rules in .htaccess format so they don't get eaten :) RewriteEngine On # skip existing files and folders RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] # get special XML files RewriteRule ^(.*)sitemap.xml$ /sitemap/index [NC] RewriteRule ^(.*)wlwmanifest.xml$ /mwapi/index [NC] # send everything to index RewriteRule ^.*$ index.php [NC,L] The "sitemap" rewrite rule works fine; the 'wlwmanifest' rule returns a "not found." Weird.

  Read the article

• Eee PC Seashell series netbook screen is cut off at bottom no matter the resolution

  - by Yzmir Ramirez

  I have an Eee PC 1015PE Seashell netbook running Windows 7 Home Premium with an Intel Graphics Media Accelerator 3150 (8.14.10.2230) with a "Generic Non-PnP Monitor" detected. I tried: Changing the resolution (Control Panel = Appearance and Personalization = Display = Screen Resolution) to 1024x768 Updating the video driver (to 8.14.10.2230) Uninstalling the driver and rebooting Pressing the Windows Key + "-" (magnifier) Pressing Ctrl + Mouse Scroll only resizes the desktop items Pressing Fn + F4 shows 1024x600 (which I think is what I should be using, but nothing happens) EDIT: Changed from Landscape to Portrait and it works Attached an External Monitor and when I extend or set as desktop it works only on the External Monitor (shows up as "Generic PnP Monitor in Device Manager) Basically the bottom inch of my desktop is off-screen hiding my start bar, but my wigets are in their proper position (the start bar is not hidden). Pressing Ctrl + Esc shows the start menu but its cut-off. I'm pretty sure I should be using 1024x600 resolution, any advice? What's odd is that this only started happening recently. EDIT2: Here are some screenshots showing the problem: Resized Window to fit: Opened Start Menu - notice it cut off: Maximized window and then scrolled down - notice no Start Menu: I downgraded my graphic driver I downloaded from the Intel Download Center for the Graphic Media Accelerator 3150 (now: 8.14.10.1972) and now my "Generic non-PnP Montior" detects as "Digital Flat Panel (1024x768 60Hz)".

  Read the article

• Moving a lotus database causes incoming mail failure

  - by Logman

  Hey all, I moved a couple lotus note databases to another hd (ran out of space) by using a directory link/pointer on the domino server. USed a text file with the .DIR ext with the desired new path etc... well that works fine. I open up a lotus notes client, use the id and then OPEN the database. The directory link works fine, the new location of the db is opened with no problems. We found out that we couldnt FORWARD any mail: We did the following to make it work: Goto menu FILE|MOBILE|EDIT CURRENT LOCATION Goto tab MAIL and enter the correct path for "Mail File:" example: it should read "mail\morespace\flabor" and not "mail\flabor" "morespace" = directory link/pointer we can forward and reply to emails fine after that fix. The problem is that the user has no incoming email. Domino is still trying to send the incoming mail of that user to its old db location "mail\flabor" instead of "mail\morespace\flabor". Delivery error saying user does not exist. Is this a cache problem? We have reset the server ("Q" at the prompt), though we have not completely shut it down though. Thanks Frank

  Read the article

• Apache ScriptAlias and access error?

  - by Parhs

  First of all after much pain i figured out how to make it work in Apache 2.4 windowz. Here is my configuration that seems to work successfully for git clone and push and everything. Problem First of all my configuration works. There is a "Require all denied" at / directory. I want only git functionality and nothing else. Example Request from a git client 192.168.100.252 - - [07/Oct/2012:04:44:51 +0300] "GET /git/simple/info/refs?service=git-upload-pack HTTP/1.1" 200 264` Error caused by that Request [Sun Oct 07 04:44:51.903334 2012] [authz_core:error] [pid 6988:tid 956] [client 192.168.100.252:13493] AH01630: client denied by server configuration: C:/git-server/web/simple There isnt any error at gitclient everything works fine but i get this at error log. Is there any solution for this error to not appear?I worry about log size. <VirtualHost *:80> DocumentRoot "C:\git-server\web" ServerName git.****censored**** DirectoryIndex index.php SetEnv GIT_PROJECT_ROOT c:/git-server/repositories SetEnv GIT_HTTP_EXPORT_ALL SetEnv REMOTE_USER=$REDIRECT_REMOTE_USER ScriptAlias /git/ "C:/Program Files (x86)/Git/libexec/git-core/git-http-backend.exe/" <LocationMatch "^/.*/git-receive-pack$"> Options +ExecCGI AuthType Basic AuthName intranet AuthUserFile "C:/git-server/config/users" Require valid-user </LocationMatch> <Directory /> Options All Require all denied </Directory> <Directory "C:\Program Files (x86)\Git\libexec\git-core"> Options +ExecCGI Options All Require all granted </Directory> </VirtualHost>

  Read the article

• Hiding subfolders from users with Windows Server security

  - by Frans

  Using Windows Server 2008. I would like to allow all users to map to a common network drive and be able to browse it. But, I only want them to be able to see the subfolders they actually have access rights to. Is this doable? Example I have a share with two folders on it; \\domain\share\FolderA \\domain\share\FolderB With three different security groups, I would like to map a network drive for all three to \\domain\share. However, for group1, I want them to only be able to see FolderA, group2 should only see FolderB and group3 should see both. I am not just talking about denying access to the actual folder, which is easy enough, I don't want the user to even be able to see that the folder exists. In other words, when group 1 logs in and do "dir n:\" they should see N:\FolderA When group 2 logs in, they should see N:\FolderB and when group 3 logs in they should see N:\Folder A N:\Folder B My half-baked solution If I completely block access to the root then I can't map a drive to it. I can give everyone the traverse right which then allows the user to map a drive. However, if a member of group1 or group2 tries to go to "N:\" they get an access denied error. If they go to N:\FolderA (for group1) then it works. So, that sort of works, but it would be nicer if the user could actually browse to N:\ and just only see the subfolders they have access to. I am pretty sure I have seen this done but not sure how to do it myself. Any advice would be greatly appreciated.

  Read the article

• Apple / Mac OS X - Is there a Package Manager like Linux

  - by Walter White

  I am a Linux/UNIX user and love the package management that comes with it. For the most part, I like Ubuntu, but just like anything else, it is the minor things that you live with daily that would be nice if they just worked. My main issue is my wacom tablet while it works, every time there is an OS update, I have to rebuild the wacom driver. The other slightly annoying issue is, my ATI video card is not fully supported. When I use the HDMI out, the sound doesn't go through it, and the screen is not entirely used. I would happily get an Apple if it had a similar package management system like Ubuntu, Gentoo, or other Linux distribution. This takes the work out of getting the latest enhancements or fixes. It also takes all the guess work out about what you need to get something to work. I just want to use my computer, not administer it. Aside from Apple applications, if I wanted to install the GIMP on an apple, would it go and fetch ufraw if I wanted support for that and whatever other dependencies GIMP has? If I want Netbeans installed, will it go and get a JDK and maven if I want that? If not, is there something in the works? I know I don't update my applications that frequently, but that is mainly because I'm not aware of the updates. The updates all happen in the background. Walter

  Read the article

• Exchange Connector Won't Send to External Domains

  - by sisdog

  I'm a developer trying to get my .Net application to send emails out through our Exchange server. I'm not an Exchange expert so I'll qualify that up front!! We've set up a receive Connector in Exchange that has the following properties: Network: allows all IP addresses via port 25. Authentication: Transport Layer Security and Externally Secured checkboxes are checked. Permission Groups: Anonymous Users and Exchange Servers checkboxes are checked. But, when I run this Powershell statement right on our Exchange server it works when I send to a local domain address but when I try to send to a remote domain it fails. WORKS: C:\Windows\system32Send-Mailmessage -To [email protected] -From [email protected] -Subject testing -Body testing -SmtpServer OURSERVER (BTW: my value for OURSERVER=boxname.domainname.local. This is the same fully-qualified name that shows up in our Exchange Management Shell when I launch it). FAILS: C:\Windows\system32Send-Mailmessage -To [email protected] -From [email protected] -Subject testing -Body testing -SmtpServer OURSERVER Send-MailMessage : Mailbox unavailable. The server response was: 5.7.1 Unable to relay At line:1 char:17 + Send-Mailmessage <<<< -To [email protected] -From [email protected] -Subject testing -Body himom -SmtpServer FTI-EX + CategoryInfo : InvalidOperation: (System.Net.Mail.SmtpClient:SmtpClient) [Send-MailMessage], SmtpFailed RecipientException + FullyQualifiedErrorId : SmtpException,Microsoft.PowerShell.Commands.SendMailMessage EDIT: From @TheCleaner 's advice, I ran the Add-ADPermission to the relay and it didn't help; [PS] C:\Windows\system32Get-ReceiveConnector "Allowed Relay" | Add-ADPermission -User "NT AUTHORITY\ANONYMOUS LOGON" -E xtendedRights "Ms-Exch-SMTP-Accept-Any-Recipient" Identity User Deny Inherited -------- ---- ---- --------- FTI-EX\Allowed Relay NT AUTHORITY\ANON... False False Thanks for the help. Mark

  Read the article

• Multimaster Keepalived Configuration (Virtual IP with Load Balancing)

  - by Rad Akefirad

  Here are requirements: 1. High Availability 2. Load Balancing First configuration 1. Two linux servers have been configured with one static IP for each: 10.17.243.11, 10.17.243.12 2. Keepalived has been installed and configured with one VRRP instance to provide one virtual IP (10.17.243.10 as VIP, 10.17.243.11 as master and 10.17.243.12 as backup). 3. Everything works fine. The VIP is assigned to the master server (10.17.243.11) as long as it is up and running. As soon as it goes down, the VIP will be assigned to the backup server (10.17.243.12). 4. The problem here is all communication goes to the master server. Second configuration 1. I found active-active configuration for Keepalived which is possible by defining more than one VRRP instance. So that both server have two IPs (real 10.17.243.11 and virtual 10.17.243.10 for server #1 and real 10.17.243.12 and virtual 10.17.243.20 for server #2. 2. Everything works fine. we have two VIPs which are accessible (HA). But all communication coming to each IP still goes to one single machine (either server #1 or #2 depending on the IP). However I found some tricks on the DNS to overcome this limitation. But it's not acceptable in our case. Question: Is there any way to have one virtual IP which is assigned to both servers? By that I mean both servers are handling some part of workload (like the thing we do in web server load balancing)? By using either keepalived or some other tools? Thanks in advance.

  Read the article

• Speakers silent, headphones work in Ubuntu 9.04

  - by CarlF

  I'm running Ubuntu 9.04. Worked fine for months, then I rebooted yesterday after weeks of continuous operation. Now audio won't play through the speakers. The USB headset works fine, but the Conexant audio (CX20549) does not. Weirdly, it thinks it's playing. pavumeter shows appropriate levels, volume looks OK in alsamixer, but no sound. I did find this page: http://www.eugeneteplitsky.com/fixing-silent-pulseaudio-in-ubuntu-9-04/ Unfortunately the advice there doesn't help me. For one thing, the syntax for the alsa-base.conf file is apparently not actually documented anywhere. For another, my chipset isn't listed in the kernel.org docs he links to! EDIT: would upgrading to 9.10 help? Is there a major change in the audio subsystem between 9.04 and 9.10? Any suggestions? EDIT 2: This is stranger than I thought. Sound works normally in Xine, but is silent in Audacity, VLC and mplayer. What the?

  Read the article

• ssh without password does not work for some users

  - by joshxdr

  I have a new RHEL4 Linux box that I am using to copy data to old Solaris 2.6 and RHEL3 Linux boxes with scp. I have found that with the same setup, it works for some users but not for others. For user jane, this works fine: jane@host1$ ssh -v remhost debug1: Next authentication method: publickey debug1: Trying private key: /mnt/home/osborjo/.ssh/identity debug1: Offering public key: /mnt/home/osborjo/.ssh/id_rsa debug1: Server accepts key: pkalg ssh-rsa blen 277 debug1: read PEM private key done: type RSA debug1: Authentication succeeded (publickey). for user jack it does not: jack@host1 ssh -v remhost debug1: Next authentication method: publickey debug1: Trying private key: /mnt/home/oper1/.ssh/identity debug1: Offering public key: /mnt/home/oper1/.ssh/id_rsa debug1: Authentications that can continue: publickey,password,keyboard-interactive I have looked at the permissions for all the keys and files, they look the same. Since I am using home directories mounted by NFS, the keys for both the remote host and the local host are in the same directory. This is how things look for jane: jane@host1$ ls -l $HOME/.ssh -rw-rw-r-- 1 jane operator 394 Jan 27 16:28 authorized_keys -rw------- 1 jane operator 1675 Jan 27 16:27 id_rsa -rw-r--r-- 1 jane operator 394 Jan 27 16:27 id_rsa.pub -rw-rw-r-- 1 jane operator 1205 Jan 27 16:46 known_hosts For user jack: jack@host1$ ls -l $HOME/.ssh -rw-rw-r-- 1 jack engineer 394 Jan 27 16:28 authorized_keys -rw------- 1 jack engineer 1675 Jan 27 16:27 id_rsa -rw-r--r-- 1 jack engineer 394 Jan 27 16:27 id_rsa.pub -rw-rw-r-- 1 jack engineer 1205 Jan 27 16:46 known_hosts As a last ditch effort, I copied the authorized_keys, id_rsa, and id_rsa.pub from jill to jack, and changed the username in authorized_keys and id_rsa.pub with vi. It still did not work. It seems there is something different between the two users but I cannot figure out what it is.

  Read the article

• Can not access SQLServer database

  - by btrey

  I'm trying to convert an Access database to use a SQLServer backend. I've upsized the database and everything works on the server, but I'm unable to access it remotely. I'm running SQLServer Express 2005 on Windows Server 2003. The server is not configured as a domain controller, nor connected to a domain. The computers I'm trying to access the server from are part of a domain, but there are no local domain controllers. I'm at a remote location and the computers are configured and connected to the domain at the home office, then shipped to us. We normally log in with cached credentials and VPN into the home office when we need to access the domain. I can use Remote Desktop Connection to access the 2k3 server which is running SQLServer. If I log into the server with my username, I can bring up the database, access it via the Trusted Connection, and the database works. If I try to run the database locally, however, I get the Server Login dialog box. I can not use a Trusted Connection because my local login is to the home office domain and is not recognized by the SQLServer machine. If I try to use the username/password that is local to the SQLServer, I get a login failed error. I've tried entering the username as "username", "workgroup/username" (where "workgroup" is the name of the workgroup on the SQLServer), "sqlservername/username" and "[email protected]" where "1.2.3.4" is the IP of the SQLServer. In all cases, I get a login failed error. As I said, I can login to the server via Remote Desktop Connection with the same username and password and use the database, so permissions for the username appear to be correct for both a remote connection and for database access. Not sure where to go from here and any assistance would be appreciated.

  Read the article

• DNS requests failing from computers that can ping DNS server

  - by dunxd

  I have a situation where computers in some of our remote offices from time to time lose the ability to use our DNS server (in head office) to resolve hostnames. The offices are connected via VPN using Cisco ASA 5505 (VPNclient config rather than Site to Site). Ping to the IP address of the DNS server works. But nslookup will get a "no response from server" message. Computers in other locations can use DNS fine. This is an intermittent problem. One day/hour it works, another it doesn't. Other offices connected in the same way work when another doesn't. No config changes have been made on routers around the time we see the problem. Some users have reported that the problem goes away after doing a repair connection in Windows XP. I think this could be caused by the DNS cache being flushed as part of this - the Windows DNS cache makes the intermittent problem look less so because it caches failed lookups as well as successful ones. However, it is possible some other aspect of Windows is involved. Windows 7 clients have also had the same problem. Any pointers on deeper troubleshooting, or anyone else found this?

  Read the article

• Allow incoming connections on Windows Server 2008 R2

  - by Richard-MX

  Good day people. First, im new to Windows Server. I've always used Linux/Apache combo, but, my client has and AWS EC2 Windows Server 2008 R2 instance and he wants everything in there. Im working with IIS and PHP enabled as Fast-CGI and everything is working, but, i cant see the websites stored in it from internet. The public DNS that AWS gave us for that instance is: http://ec2-XX-XXX-XXX-121.us-west-2.compute.amazonaws.com/ But, if i copy paste that address, i get nothing, no IIS logo or something like that. My common sense tells me that maybe the firewall could be blocking the access. Can anyone help me and tell where to enable some rules to get this thing working? I don't wanna start enabling rules at random and make the system insecure. If you need any additional info, you can ask me and i will provide it. Thanks in advance. UPDATE: Amazon EC2 display this: Public DNS: ec2-XX-XXX-XXX-121.us-west-2.compute.amazonaws.com Private DNS: ip-XX-XXX-XX-252.us-west-2.compute.internal Private IPs: XX.XXX.XX.25 In my test microinstance, i just to use the Public DNS address (the one that starts with "ec2") and it works like a charm (of course, the micro instance have its own Public DNS im not assuming same address for both instances...) However, for the large instance, i tried to do the same. Set up everything as in the micro instance but if i use the Public DNS, it doesnt load anything. Im suspicious about the Windows Firewall, but, the HTTP related stuff is enabled. What should i do to get access to the large instance? I don't want to set up the domain yet, i want access from an amazon url. 2ND EDIT: all fixed. Charles pointed that maybe Security Groups was not properly set up for the instance. He was right. Just added HTTP service to the rules and all works good.

  Read the article

• Concatenating ogg video files from the command line

  - by Noufal Ibrahim

  Okay. I've got a few ogg files I've created using a desktop recording tool. I've transcoded them using ffmpeg once (mainly to clip out the beginnings and the ends). Now, I have 3 such files which I want to concatenate into a single .ogv file. I tried using oggCat, it crashed with some kind of error (I tried concatenating a file to itself using oggCat and that failed too leading me to believe that my distro is shipping a broken version of the package). Simply cating the files works but I can't seek which is not cool. mencoder run like this mencoder -ovc lavc -oac lavc file1.ogv file2.ogv file3.ogv -o complete.ogv. It transcodes the files into an avi and clips off a little of the 3 videos. So, how do I do this? Update 1: My current workaround is to transcode the 3 files into .mpg using ffmpeg, then cating them together and then transcoding them back into ogv. Update 2: PiTiVi works for this kind of thing but I need something from the command line that I can automate and script.

  Read the article

• OpenWRT + OpenVPN client forwarding from lan to vpn not working

  - by Dariusz Górecki

  I've OpenWRT router with Backfire 10.03.1-rc3 (arch:brcm 2.6 kernel) I've set up an OpenVPN client connecting my router with workplace lan, and it works nicely, I can connect from router to networks (several) in workplace. My OpenVPN client uci-config looks like: config 'openvpn' 'stream_client' option 'nobind' '1' option 'float' '1' option 'client' '1' option 'reneg_sec' '0' option 'management' '127.0.0.1 31194' option 'explicit_exit_notify' '1' option 'verb' '3' option 'persist_tun' '1' option 'persist_key' '1' list 'remote' 'remote.address.cutted' option 'ca' '/lib/uci/upload/cbid.openvpn.stream_client.ca' option 'key' '/lib/uci/upload/cbid.openvpn.stream_client.key' option 'cert' '/lib/uci/upload/cbid.openvpn.stream_client.cert' option 'enable' '1' option 'dev' 'tun1' I've set the 'STREAM_VPN' Zone to allow in/out traffic, and I've added rules for zone-to-zone lan<-vpn and vpn<-lan config 'zone' option 'name' 'stream_vpn' option 'network' 'stream_vpn' option 'input' 'ACCEPT' option 'output' 'ACCEPT' option 'forward' 'REJECT' config 'forwarding' option 'src' 'lan' option 'dest' 'stream_vpn' config 'forwarding' option 'src' 'stream_vpn' option 'dest' 'lan' And interface config: config 'interface' 'stream_vpn' option 'proto' 'none' option 'ifname' 'tun1' option 'defaultroute' '0' option 'peerdns' '0' Now, from my router everything works nicely, the problem is that I cannot connect from computer inside a lan to hosts in networks provided by vpn connection :/ What I've missed, or what I'm doing wrong? And how can I force using specified DNS when connected to vpn? (I know that sever should use PUSH DNS option, but is PUSHes only routes)

  Read the article

• Set postfix to send email but not to receive them

  - by CodeShining

  I'm using Google Apps to handle personal email addresses for my domain name, and I set up the DNS as Google suggests. All works fine. Now since I need a SMTP to send emails from my e-commerce I installed Postfix on the server. It works fine when I send emails to any email address but it doesn't send to the same domain name, so let's say my domain is example.com, I set postfix using example.com, if I try to reset a password using [email protected] postfix doesn't send and instead reports on the mail.log Sep 20 01:09:52 ip-10-54-26-162 postfix/pickup[6809]: B09A3415D8: uid=33 from=<www-data> Sep 20 01:09:52 ip-10-54-26-162 postfix/cleanup[6854]: B09A3415D8: message-id=<20120920010952.B09A3415D8@ip-10-54-26-162.eu-west-1.compute.internal> Sep 20 01:09:52 ip-10-54-26-162 postfix/qmgr[30978]: B09A3415D8: from=<[email protected]>, size=4234, nrcpt=1 (queue active) Sep 20 01:09:52 ip-10-54-26-162 postfix/local[6856]: B09A3415D8: to=<[email protected]>, relay=local, delay=0.01, delays=0.01/0/0/0, dsn=5.1.1, status=bounced (unknown user: "myaccount") Of course it cannot find a local user "myaccount" since that account is on Google Apps... How can I tell Postfix to send the email and do not search for a local user?

  Read the article

• Keyboard issue when using kitty+puttycyg but not when using putty or cygwin alone

  - by kamaradclimber

  I would like to use a unique way to use console on my windows setup. Previously I used putty for remote access to linux servers and cygwin to have unix-like tools on windows. Then I discovered kitty which is a patched putty and have added the puttycyg patch. It provides the same way to connect to remote and local console. However, there is a strange behavior using vim when connected to the local console (using the puttycyg patch) : keys display A/B/C/D and replace the current character by these letter. In insert mode it does replace the caracter, in normal mode, no modification is made to the document even if the caracter is displayed as replaced. For instance, when I type : fixed bug with product deleted I get : fixed bbug wiwith prprodudueleteted I have read a lot of questions about this type of issue 3, 4 and googled it but there is no answer that work for me. The issue is present only for the setup kitty+puttycyg patch : cygwin alone works perfectly (and putty alone works also for access to linux servers). Any help would be appreciated !

  Read the article

• Hyper-v on 2012R2 startup gen1 vm causes the host to freeze up

  - by sputnik

  I've searched a lot to resolve the following issue, but nothing helped me. My problem is, that starting up a first-gen vm locks up the whole host. Only a hard reset helps. Second-gen vm starts and runs perfectly. The freezes happened on 3 different vms. FreeBSD, Ubuntu, Windows Server 2008R2, while Windows 8.1 on second gen config works perfectly. Im using this pc mainly as a workstation. No eventlog errors nor dumps are generated. My system: Windows Server 2012R2 FX-8350, non OC ASRock 870 Extreme R2 (Crappy board imho) 32GB DDR3 1866@1600 (My motherboard, against the "support" for 1866ram won't work with full speed) 120GB SSD 4.5TB Storage space device I dont think that its due to my system, because vmware workstation was running without problems. Did I forget to configure something? Any help is appreciated. P.S: Even deactivating C1E, C6, C&Q didnt work. P.P.S: With no virtual network adapter set, the system still locks up. Creating a first gen vm without any hdds and network and launching works. Attaching a boot dvd causes the host to freeze. The host freezes as the gen1 vm begins to boot, doesn't matter if from dvd or hdd

  Read the article

• linux keeps disconnecting from wireless network

  - by Matteo Ceccarello

  I'm running Arch Linux on an Acer laptop and my wirless connection doesn't stay up. After a while it disconnects, and when I try to reconnect I get stuck with a "Waiting for authorization" message. I have to retry several times before getting the connection stay up for few minutes. This happens with both networkmanager and wicd. The strange thing is that the iMac that sits next to the laptop connects fine, and when I use my laptop within the university wireless network it works normally. How can I solve this problem? EDIT: I've tried to connect manually following the steps iwlist wlan0 scan wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf dhcpcd wlan0 and it works, I can ping google. However, looking to wpa supplicant output I see that it keeps connecting and disconnecting. I'm using WPA2, and this seems to be a problem in authentication. EDIT 2: as pointed out in the answers I forgot to mention my hardware/software specifications: kernel: Linux 3.0-ARCH wireless card: # lspci | grep -i net 07:00.0 Network controller: Intel Corporation WiFi Link 5100 module used # lsmod | grep -i 80211 mac80211 216021 1 iwlagn I use a Netgear DGN1000 modem/router My dmseg output is shown here http://pastebin.com/8Tf7iage

  Read the article

• GeekTool logs "command not found" for commands that work fine in Terminal

  - by Kevin Dowling

  I'm trying to run simple commands so I can have GeekTool output date/time etc. to my desktop. Should be simple enough to do but it never actually outputs anything into the boxes. Console log shows it's getting spammed by GeekTool to say 'command not found', though the same command (e.g. date +"%H:%M") works fine in Terminal. All I want to achieve is the ability to output a clock displaying time/date on my desktop that fits into my wallpaper. I've tried changing the format of the commands, using the built-in editor window as well as the command line box on the Properties tab. I had a look at the permissions in '/' (because GeekTool runs commands from there) and nothing unusual comes up. None of these solved the issue. When I use a command that simply echo's a string it works (e.g. echo "hello" displays the word hello). Does anyone have experience with GeekTool, and understand why it won't run basic commands? As I say, it's spamming my console with 'command not found' despite them working in terminal... Running OS X 10.6.6 on a MacBook Pro (mid-2010).

  Read the article

• BIND master/slave does not respond for queries for its slave

  - by Savas

  Systems are all Centos 6.2 Lets say I have a masterdns with IP 10.2.1.2, authoritative for the 10.2.1.X subnet and let say it is domain example.com I have another two subnets, 10.2.2.X and 10.1.2.X Each one has its own DNS server, dns2 and dns1 respectively and let say these are domains dom2.example.com and dom2.example.com respectively. The masterdns server has slave zones for dns1, dns2 and respond to requests OK. The dns1, dns2 have the masterdns zones as slaves two, and respond to requests OK. So, the masterdns has as slave zones all the subordinate domains of example.com Each of dns1 and dns2 use masterdns as a forwards (which uses another dns cache/proxy server) for dns resolution of internet public domain names. It works OK that too. The problem is, and I cannot figure it out. Why queries for example at dns1 for hostnames of dom2.example.com do not resolve? If i use nslookup - masterdns at dns1 server, resolve (i use directly the dns facility of masterdns). If I use nslookup locally, meaning queries are sent to dns1, for hosts that are at dom2.example.com, they do not resolve. Everything other works OK.

  Read the article

• Win7 Credential manager and accessing SQL Server from outside of the domain

  - by David Lively

  My SQL Server is set to use windows authentication. If I am connected to the domain directly from my Win7 Ultimate x64 machine, SQL Management Studio (SSMS) will let me authenticate with Windows authentication. However, if I am connected via the VPN (from a different machine that is not joined to the domain), it won't. If I start SSMS with the following command line: C:\Windows\system32>runas /netonly /user:domainname\username "C:\Program Files (x86)\Microsoft SQL...\ssms.exe" then connecting to the SQL Server (which is in the domain) with Windows Authentication works fine. I'd like to save these credentials so that I don't have to launch SSMS from the command line, or modify the shortcut. I know I can use the SysInternals ShellRunAs extension to do this, but I again have to enter my domain username and password each time, and shift+right-click to see that menu option. The Windows Credential Manager seems designed to solve this problem, and works for network shares. However, it doesn't seem to work for SSMS. Any suggestions? I've tried using the /savecred option with runas to create the necessary credentials, but that appears to be incompatible with the /netonly option. Running the above command line with the addition of /savecred just displays the runas help screen. Grrr. Argh.

  Read the article

• nginx: how do I add new site/server_name in nginx?

  - by Neo

  I'm just starting to explore Nginx on my Ubuntu 10.04. I installed Nginx and I'm able to get the "Welcome to Nginx" page on localhost. However I'm not able to add a new server_name, even when I make the changes in site-available/default file. Tried reloading/restarting Nginx, but nothing works. One interesting observation. "http://mycomputername" in browser works. So somehow there is a command like 'server_name $hostname' somewhere over-riding my rule. File: sites-available/mine.enpass server { listen 80; server_name mine.enpass ; access_log /var/log/nginx/localhost.access.log; location / { root /var/www/nginx-default; index index.html index.htm; } } File: nginx.confg user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_comp_level 2; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; }

  Read the article

• Unattended Kickstart Install

  - by Eric

  I've looked around quite a bit and have seen similar setup and questions, but none seem to work for me. I'm using the following command to create a custom ISO: /usr/bin/livecd-creator --config=/usr/share/livecd-tools/test.ks --fslabel=TestAppliance --cache=/var/cache/live This works great and it creates the ISO with all of the packages and configs I want on it. My issue is that I want the install to be unattended. However, every time I start the CD, it asks for all of the info such as keyboard, time zone, root password, etc. These are my basic settings I have in my kickstart script prior to the packages section. cdrom install autopart autostep xconfig --startxonboot rootpw testpassword lang en_US.UTF-8 keyboard us timezone --utc America/New_York auth --useshadow --enablemd5 selinux --disabled services --enabled=iptables,rsyslog,sshd,ntpd,NetworkManager,network --disabled=sendmail,cups,firstboot,ip6tables clearpart --all So after looking around, I was told that I need to modify my isolinux.cfg file to either do "ks=http://X.X.X.X/location/to/test.ks" or "ks=cdrom:/test.ks". I've tried both methods and it still forces me to go through the install process. When I tail the apache logs on the server, I see that the ISO never even tries to get the file. Below are the exact syntax I'm trying on my isolinux.cfg file. label http menu label HTTP kernel vmlinuz0 append initrd=initrd0.img ks=http://192.168.56.101/files/test.ks ksdevice=eth0 label localks menu label LocalKS kernel vmlinuz0 append initrd=initrd0.img ks=cdrom:/test.ks label install0 menu label Install kernel vmlinuz0 append initrd=initrd0.img root=live:CDLABEL=PerimeterAppliance rootfstype=auto ro liveimg liveinst noswap rd_NO_LUKS rd_NO_MD rd_NO_DM menu default EOF_boot_menu The first 2 give me a "dracut: fatal: no or empty root=" error until I give it a root= option and then it just skips the kickstart completely. The last one is my default option that works fine, but just requires a lot of user input. Any help would be greatly appreciated.

  Read the article

< Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >