Search Results

Search found 9758 results on 391 pages for 'wireless networking'.

Page 343/391 | < Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >

• List of tablets with keyboards.

  - by JamesM

  Please if you know any good tablets with keyboards that come either built-in or attachable (not via a USB port) please post a link to the tablet, Please add a review for that tablet if you have one, if you don't have one please say what you would do with it if you had one. It must have a physical keyboard, Cannot be a wired or wireless keyboard, only built-in/attachable see below tablets for more of an idea. Tablets With Keyboards: http://gdgt.com/asus/eee/pad/slider/ http://gdgt.com/asus/eee/pad/transformer/ If you have a table, Please what do you think of it: (Review) Your-Name: Your review. If you don't have a tablet (with a non USB keyboard) please say what you would do with one: JamesM: If I have a slider or a transformer, it would be running kFreeBSD-Debian-Squeeze. Please feel free to improve the layout/format of this topic.

  Read the article

• Multiple Subnets on home network... would this work?

  - by rockinthesixstring

  We are looking at renting out the basement suit in our home and want to offer internet as part of the package. I however do not want the downstairs tennent to have access to our network (home office = private data). We currently have a pfsense firewall as our gateway and a Windows Server 2003 box is doing our primary DHCP (192.168.0.0/24) and DNS. Here's what I'd like to do... I'd like to setup another subnet on the DHCP server (192.168.1.0/24), and hook in another wireless router (as access point only) and address it as 192.168.1.1... from there the router will hook into our primary switch and then out through the firewall. Will Server 2003 (If I add a 192.168.1.x/24 IP to the nic) serve DHCP to the devices that connect to the new router, and will it isolate that from our network? Thanks in advance... I'm very new to multiple subnets.

  Read the article

• Internet very slow when upgrading to Ubuntu 9.10

  - by roojoo

  I was running Ubuntu 8.x on my desktop and everything worked fine. Im using wired internet and it worked perfectly, pages loaded pretty fast. However, when I decided to upgrade to 9.10 the upgrade failed at some point, however I was left with what appeared to be Ubuntu 9.10. Since then the internet has been weird. When I go to a website it takes at least 10 seconds for the page to display, however if Im on a site and navigate to other pages on the website it loads quickly. This never happened prior to the upgrade. I thought this may be due to the upgrade not installing correctly so I did a fresh install of Xubuntu 9.10 but the problems are still the same. Im writing this on a Vista machine over the wireless network and internet is fine. Does anyone have any ideas of the issue? Thanks.

  Read the article

• OpenBSD in a virtual box as a firewall

  - by Ali

  Is there any merit in installing a virtual machine with OpenBSD and pf (or any other simple and secure OS + iptable) on a mac laptop and routing all the traffic through that machine? I read a similar set up for corporate laptops running windows (I thing I read this in BSD magazine). They claim that Windows machines are too hard to secure and if you are taking them to the wild (public wireless, hotels, ...) you'd better but a secure OS in between! If you think this is a good idea, how you route all the traffic on a mac through the virtual machine and prevent any application or service to go directly? I am not sure if just setting the gateway will do that, what about DNS? you don't want anybody to fool you with DNS cache poisoning or similar attacks either.

  Read the article

• Infrastructure for a "news-feed"

  - by ensnare

  I'd like to offer a news-feed like feature for users of our website. When the user logs in, he is shown a list of the latest updates across various areas of the site. I'm afraid that this is going to be difficult to scale. What are some networking / database topologies that can support a scalable infrastructure without having lots of copies of the same data? (I'd like to make it so if a piece of data is updated, each user's feed is also updated live). Thanks for the assistance and advice.

  Read the article

• Program to customize mouse buttons?

  - by roflwaffle

  I have a Logitech M510 wireless mouse and am on a Mac. Right now I can assign different actions to the 2 thumb buttons through the Logitech control panel. What I want to do is have mouse button combos to perform actions. So if I am holding thumb button 1 and click the left button, a tab will close in Chrome. As well as any other "hold one button, click another" combination. Is there any program out there that gives this type of customization?

  Read the article

• Nokia Pc Suite problems with bluetooth (win7)

  - by wurlog

  I have a new Nokia C5-00 and a HP 620. The Bluetoothdriver are installed and the windows Bluetoothstack finds the mobile. After installing Nokia PC Suite I am asked to choose a connection method. As I click on Bluetooth the Nokia PC Suite shows an error message: "Cannot use the connection type.Check that all the needd hardware,software and drivers are available. (Code: OpenMedia)" I tried to switch it on and off via the "wireless" key on the laptop. The HP Software for the button shows that the Bluetooth is deactivated and advices me to go to the device manager and activate the Bluetooth device. Strangely the Bluetooth symbol (I guess from the windows Bluetoothstack) pops up at the same time and I can use the Bluetooth in it's basic windows features, but still nokia suite won't work. ideas????

  Read the article

• Not working WEP key in Ubuntu

  - by stupid-idiot

  This time I've got some problem with connection to the internet from my old laptop with ubuntu, I already had some problems with setting up the radio on my network card but I think it works now since it finds some wireless networks. The problem is that I can't connect to my router via wi-fi even if I'm hundred-percently sure the wepkey I punch there is correct, it works via LAN though. Also, I'm not able to ping myself with 127.0.0.1. I'm sorry to say it but I don't think I can stand this shitness for much longer. Although it's much much faster than Windows it's useless since i can't download any libraries for development. If anyone has any experience with this, even indirect, please leave your answer or comment thx

  Read the article

• Direct TCP/IP connections in P2P apps

  - by Greg Roberts

  From a Joel's post on Copilot: Direct Connect! We’ve always done everything we can to make sure that Fog Creek Copilot can connect in any networking situation, no matter what firewalls or NATs are in place. To make this happen, both parties make outbound connections to our server, which relays traffic on their behalf. Well, in many cases, this isn’t necessary. So version 2.0 does something rather clever: it sets up the initial connection through our servers, so you get connected right away with 100% reliability. But then once you’re all connected, it quietly, in the background, looks for a way to make a direct connection. If it can’t, no big deal: you just keep relaying through our server. If you can make a direct peer-to-peer connection, it silently shifts your data onto the direct connection. You won’t notice anything except, probably, much faster communication. How do they change the server connection to a P2P connection?

  Read the article

• netsh wlan add profile not imported passphrase

  - by sirlancelot

  I exported a wireless network connection profile from a Windows 7 machine correctly connected to a WiFi network with a WPA-TKIP passphrase. The exported xml file shows the correct settings and a keyMaterial node which I can only guess is the encrypted passphrase. When I take the xml to another Windows 7 computer and import it using netsh wlan add profile filename="WiFi.xml", it correctly adds the profile's SSID and encryption type, but a balloon pops up saying that I need to enter the passphrase. Is there a way to import the passphrase along with all other settings?

  Read the article

• Simple non-network concurrency with Twisted

  - by Rince

  Dear pythoners, I have a problem with using Twisted for simple concurrency in python. The problem is - I don't know how to do it and all online resources are about Twisted networking abilities. So I am turning to SO-gurus for some guidance. Python 2.5 is used. Simplified version of my problem runs as follows: A bunch of scientific data A function that munches on the data and creates output ??? < here enters concurrency, it takes chunks of data from 1 and feeds it to 2 Output from 3 is joined and stored My guess is that Twisted reactor can do the number three job. But how? Thanks a lot for any help and suggestions.

  Read the article

• Stream music from Laptop to iPod Touch over Wi-Fi

  - by codeulike

  Rather than running a long cable from my Laptop to my stereo, I've been thinking for a while about getting one of those wireless devices that lets you transmit audio from your PC to a receiver plugged into the stereo. Then I realised I already have hardware that can potentially do this - I have an iPod Touch, and a Wi-Fi network in the house. So, is there some iPod Touch App that will let the iPod act as a Wi-Fi music receiver? And presumably, a corresponding piece of broadcast software for my (Windows Vista) Laptop?

  Read the article

• Windows IIS test server setup

  - by chopps

  hello everyone, I picked up a new server to do some testing and need of a little help in setting up my environment at home. Here is what I would like to do: The test server will be used to test new code and configurations for a SaaS product. I would like from my laptop to enter www.acme.com and have it hit the server. The server is connected to a wireless router. I have windows server 2008 with IIS running on an an IP of 192.168.1.4. What is the best way to set this up? I want to hit the test server for www.acme.com and not go out to the internet. Do i need to mess with the LMHosts file? Thanks for the help. Im sure its easy but have never done this before.

  Read the article

• Limiting use of filesharing services

  - by EpsilonVector

  I live in an apartment with 3 other roommates, and we share the internet connection though a wireless router (Level One WBR-3406TX). One of the roommates is always running utorrent, and it is slowing down everybody's connection way too much. Unfortunately, he feels like he shouldn't have to give up on downloading stuff, and is refusing to stop hogging the bandwidth. I was wondering if there's something I can do to the router configuration that would disrupt his use of utorrent just enough to to make the internet usable for the rest of us, and still have it work well enough for him so that he doesn't start poking around looking for answers.

  Read the article

• What is Light Peak

  - by Jonathan.

  I've heard this a lot recently, todo with Apple and Intel. Some says it's a protocol, others say it's fibre optic, and others say it's copper. One source even said it was a "wireless wire". Apparently it can carry data, but not video streams, surely the cable can't know the difference between 1s and 0s representing data, and 1s and 0s representing video streams. Or it will replace all the wires we currently have except power, another place said it is for inside laptops. Those are just examples so I haven't given any sources, I just want to know what on Earth Light Peak is?

  Read the article

• How do you get your self focused with so many distractions around? (which you can't or don't want to

  - by Teja Kantamneni

  This question is definitely for a programmer and is centric towards a programmer. But if somebody feels it should not belong here I would not mind deleting it. I don't think this need to go as a WIKI, but if feel like it is a WIKI, I can do that too. The Question is: As a programmer you have to keep yourself up to date with the latest technologies and for that every programmer will generally follow some technology blogs and some social networking sites like (twitter, FB, SO, DZONE etc), how to keep your self focused on the things and still want to follow the technology trends? No Subjective or argumentative answers, Just want to know what practices other fellow programmers do for this...

  Read the article

• Belkin router issue

  - by walr1

  Hi, My cousin and I bought a wireless Belkin router for testing purposes. Please keep in mind for all of our tests there is no ethernet cable plugged in, just the router's power cord. We have been trying to "flood" it with PING requests on its default address 192.168.2.1, but it isn't doing a thing; not even logging any attempts of too many requests. I've disabled the firewall, disabled PING request block, etc. Any idea why this thing isn't being affected? We sent 4 million packets and it hasn't done a thing. Quite odd! Thanks.

  Read the article

• Windows 7 - sharing file - slow seek time?

  - by progtick

  I do not want to copy the files. I simply have video files (.flv) on one computer and I would like another computer user to watch them without copying. Playback is fine, but seek time (as in if you move the cursor to skip some portion of the video) takes forever! I thought wireless speed might be the culprit, so I wired the two computer. Maybe I saw some improvement but still so bad. It's 1 Gbps! (I know real speed will vary, but before I monitor real speed and such, do I have reasonable issue? Or am I bound to have very slow seek time?) What is going on? I must mention some of these files are huge!

  Read the article

• Implement a vpn

  - by jackson

  I want to build an application client(client.exe) - server to do the following: when the clients run it they are thrown in a VPN and they can communicate each other within 1 applicataion. For example : clients run client.exe and they can see each other in LAN ONLY in Starcraft. From what i have read the right type of vpn for this situation is Secured Socket Tunneling Protocol: "Secure socket tunneling protocol, also referred to as SSTP, is by definition an application-layer protocol. It is designed to employ a synchronous communication in a back and forth motion between two programs. It allows many application endpoints over one network connection, between peer nodes, thereby enabling efficient usage of the communication resources that are available to that network. " Question: I don't have experience with networking programming so my question for the ones who have, is this the right approach? PS1: i don't want something done like OpenVpn, i do this as learning exercise. PS2: the application is targeting Windows and i plan to use .NET Thanks for reading the whole story, i am waiting for your replies.

  Read the article

• Using PC or Mac keyboard as Bluetooth keyboard for iPad?

  - by Kevin Hakanson

  I would like to use my computer keyboard (USB) as a Bluetooth keyboard for my iPad, while I am using it with my computer. I was hoping their was an "app for that" that I could run on either Mac or Windows. I imagine how it would work: It would have to emulate a Bluetooth keyboard, and be able to pair with the iPad. Then, when you give focus to this app, it transmits keystrokes from your built-in keyboard out over the Bluetooth connection. Seems simple, but I can't seem to find anything definitive on Google. Has anybody done this? I figure this is cheaper that buying a Apple iPad Keyboard Dock or a Apple Wireless Keyboard from the Apple Store. Also, it's one less item on my desk, which gets cluttered enough with one keyboard.

  Read the article

• What is your IT-department to staff ratio?

  - by Bart Silverstrim

  This is a topic that may be rather political but it related to system administration still...how many people do you have supporting your users in your IT department? We have three people supporting something near 1500 systems and around 2400 people and a recent question was raised about why we have long times to get systems replaced, repaired, work orders fulfilled, etc. along with the system admin duties of maintaining the servers (mail, proxy, filters, VOIP, wireless, backup, etc.) Does anyone have numbers on what the "best practices" average is of support people to employees in an organization? EDIT:...from some of the answers that are appearing I'm starting to feel depressed...

  Read the article

• Tiny linux box with 2xGbLAN, WLAN and 10MB/s AES throughput?

  - by Nakedible

  I'd like to find a small linux box with the following specifications: Small (mini-ITX size is OK) Fanless Runs Debian At least two gigabit network interfaces WLAN that supports "host ap" with hostapd + mac80211 in AP mode Can encrypt AES at least 10 megabytes per second Total cost $300 or less Solutions from multiple parts also accepted - I can buy an external network card etc. and build the box myself if the components are available. If you don't know about the "host ap" thing, just suggest your solution, I'll find out if I can get that resolved. If I can't get all that, I can possibly skip the "runs Debian" part, and I can definitely skip the hostapd part if the box can be a wireless access point with multiple ESSIDs out of the box. Something like Asus RT-N16 is close - doesn't run Debian easily, and probably doesn't encrypt AES fast enough. Something like Zotac ZBOX HD-ID11 is also close - no idea which WLAN card it has and it lacks second gigabit interface, but otherwise nice.

  Read the article

• "Socket operation on non-socket" error due to strange syntax

  - by Robert S. Barnes

  I ran across the error Socket operation on non-socket in some of my networking code when calling connect and spent a lot of time trying to figure out what was causing it. I finally figured out that the following line of code was causing the problem: if ((sockfd = socket( ai->ai_family, ai->ai_socktype, ai->ai_protocol) < 0)) { See the problem? Here's what the line should look like: if ((sockfd = socket( ai->ai_family, ai->ai_socktype, ai->ai_protocol)) < 0) { What I don't understand is why the first, incorrect line doesn't produce a warning. To put it another way, shouldn't the general form: if ( foo = bar() < baz ) do_something(); look odd to the compiler, especially running with g++ -Wall -Wextra? If not, shouldn't it at least show up as "bad style" to cppcheck, which I'm also running as part of my compile?

  Read the article

• Why does WMI Provider Host ( WmiPrvSE.exe ) keep spiking my CPU ?

  - by Sathya

  I generally keep my laptop on 24x7, and at the end of the day it's really annoying to have my thighs burnt because over overheating. The overheating seems to be a result of WMI Provider Host ( WmiPrvSE.exe ) spiking the CPU utilization to 25% every few minutes. Any ideas why this is happening ? I have an HP Envy 14 (w/ the HP bundled crap) running on Windows 7 Home Premium. (Note: Based on @nhinkle's past observations, it seems that HP Wireless Manager might be the culprit, is there any way to confirm this ?)

  Read the article

• Communication between java server and matlab client

  - by user272587

  I'd like to establish a server(Java)/client (Matlab) communication using socket. They can send messages to each other. An example shows how to do this in Java server and Java client, http://java.sun.com/docs/books/tutorial/networking/sockets/clientServer.html. When I try to rewrite the client part in Matlab, I only can get the first message that the Java server sends and display it in the Matlab command window. When I type a message in the Matlab command window, I can't pass it to the Java Server. Jave code: kkSocket = new Socket("localhost", 3434); Matlab equivalent: kkSocket = Socket('localhost', 3434); Java code for client: out = new PrintWriter(kkSocket.getOutputStream(), true); in = new BufferedReader(new InputStreamReader(kkSocket.getInputStream())); What would be a Matlab equivalent for this? Thanks in advance.

  Read the article

< Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >