Search Results

Search found 19200 results on 768 pages for 'xp mode'.

Page 343/768 | < Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >

  • Bookshelf viewer for Windows

    - by kokbira
    Once upon a time I used a Linux distro (I don't remember which one) and I could see files and folders in an interesting viewer mode: a bookshelf. I'm searching a software for Windows that does that, but I don't found it yet. I found that ones: FilePro Windirstat They do the work well, but I would like a more-friendly interface, more like a real bookshelf :) - i.e., not a common sequoia viewer AlternativeTo mentioned software.

    Read the article

  • Changing default datadirectory to one on a External NAS or add external share

    - by Hagbart Celine
    So I have been searching the web for days, looking for a solution to my problem. Now my only hope are you guys. I have installed Owncloud successfully on my Windows Server 2008R2. It all runs smoothly and I can connect without problems. So first checks are OK. Now I wanted to change the default data directory from my server to a shared folder on my NAS (Synology DS1813+, DSM 5.0-4493 Update 3). Tried following: changing the directory in config.php I changed the path in the config file from : "C:\inetpub\wwwroot\myfolder\data" to "\NASIP\cloud". by doing this the owncloud server only shows: Code: Select all Daten-Verzeichnis (\192.168.2.4\Cloud\data) ist ungültig Bitte stelle sicher, dass das Daten-Verzeichnis eine Datei namens ".ocdata" im Wurzelverzeichnis enthält. I also tried coping the files that were created in the local data storage, to the share on the NAS. No Luck. Now I tried it by mapping a network drive and using that in the config.php But still no luck. I get the same message with the missing .ocdata file. Now I tried the "External Storage APP" that comes with owncloud I thought that at least I could add the share as an external storage. But this also does not work. tried UNC, Mapped Drive Name (Z:) but nothing helped. So now I'm turning to you.. Does anyone have expirience with this kind of setup? Or can you even tell me how to make it work? (default or external storgae, I don't care anymore ) Using NAS (Synology DS1813+, DSM 5.0-4493 Update 3), Owncloud 7, Windows Server 2008 R2, IIS7 I got an answer on an other forum: The second option is how it should be done: 1. Put OC in maintenance mode 2. Mount (mapping in the windows world) your NAS directly to your OS 3. Copy the local data directory to the NAS mount 4. Ensure the permission is setup to give the web user access to the NAS mount 5. Update OC config.php with the new data path 6. Disable OC maintenance mode And this seems like the right way.. Ensure the permission is setup to give the web user access to the NAS mount I guess this is where I am not sure. What user is it exactly on my Server that is making the requests to the NAS? If the user is for example "IUSR" I can just create an account on my synology NAS and give him full access to my share? (But what is IUSRs password?) I have full root ssh access to my NAS, so if you can tell me what chmod or chown I need to use on my cloud folder...

    Read the article

  • Using both IIS6 and IIS7 with the same SQL State Server

    - by Josef
    We are trying to use new IIS7 (32bit, Classic Mode) webs in addition to our IIS6 webs with one SQL State Server for ASP.NET Session Handling. Unfortunately the number of transactions per seconds in the State Servers spikes (10 times+) as soon as we add the new IIS7 web to the farm. Are there any known issues with the described setup?

    Read the article

  • Workaround with paths in vista

    - by Argiropoulos Stavros
    Not really a programming question but i think quite relative. I have a .exe running in my windows XP PC. This exe needs a file in the same directory to run and has no problem finding it in XP BUT in Vista(I tried this in several machines and works in some of them) fails to run. I'm guessing there is a problem finding the path.The program is written in basic(Yes i know..) I attach the code below. Can you think of any workarounds? Thank you The exe is located in c:\tools Also the program runs in windows console(It starts but then during the execution cannot find a custom file type .TOP made by the creator of the program) ' PROGRAMM TOP11.BAS DEFDBL A-Z CLS LOCATE 1, 1 COLOR 14, 1 FOR i = 1 TO 80 PRINT "±"; NEXT i LOCATE 1, 35: PRINT "?? TOP11 ??" PRINT " €€‚—‚„‘ ’— ‹„’†‘„— ‘’† „”€„€ ’†‘ ‡€€‘‘†‘ ‰€ † „.‚.‘.€. " COLOR 7, 0 PRINT "-------------------------------------------------------------------------------" PRINT INPUT "ƒ?©« «¦¤ ©¬¤«?©«? ¤???... : ", Factor# INPUT "¤¦£ ¨®e¦¬ [.TOP] : ", topfile$ VIEW PRINT 7 TO 25 file1$ = topfile$ + ".TOP" file2$ = topfile$ + ".T_P" file3$ = "Syntel" OPEN file3$ FOR OUTPUT AS #3 PRINT #3, " ‘¬¤«?©«?? ¤??? = " + STR$(Factor#) + " †‹„‹†€: " + DATE$ CLOSE #3 command1$ = "copy" + " " + file1$ + " " + file2$ SHELL command1$ '’¦ ¨®e¦ .TOP ¤« ¨a­«  £ «¤ ?«a?¥ .T_P OPEN file2$ FOR INPUT AS #1 OPEN file1$ FOR OUTPUT AS #2 bb$ = " \\\ \ , ###.#### ###.#### ####.### ##.### " DO LINE INPUT #1, Line$ Line$ = RTRIM$(LTRIM$(Line$)) icode$ = LEFT$(Line$, 1) IF icode$ = "1" THEN Line$ = " " + Line$ PRINT #2, Line$ PRINT Line$ ELSEIF icode$ = "2" THEN Line$ = " " + Line$ PRINT #2, Line$ PRINT Line$ ELSEIF icode$ = "3" THEN Number$ = MID$(Line$, 3, 6) Hangle = VAL(MID$(Line$, 14, 9)) Zangle = VAL(MID$(Line$, 25, 9)) Distance = VAL(MID$(Line$, 36, 9)) Distance = Distance * Factor# Height = VAL(MID$(Line$, 48, 6)) PRINT #2, USING bb$; icode$; Number$; Hangle; Zangle; Distance; Height PRINT USING bb$; icode$; Number$; Hangle; Zangle; Distance; Height ELSE END IF LOOP UNTIL EOF(1) VIEW PRINT CLS LOCATE 1, 1 PRINT " *** ’„‘ ’“ ‚€‹‹€’‘ *** " END

    Read the article

  • Client has been through 3 PSUs, now what?

    - by Moshe
    A client of mine has an XP era eMachines. The power supply has died and been replaced 3 times. I've discharged the motherboard and checked the surge protector. In the middle of a scan with ComboFix, the machine died. It powers on and hangs before the BIOS and shows a solid yellow light. I believe the model # is T5062 or something like that.

    Read the article

  • How do I find a file that begins with a phraze in Windows Search?

    - by plasmuska
    Hi Guys, What is the syntax for searching a file with file name that STARTS with a certain phrase? Example: I have two files: 60933 blahblah.xls PZ 60933 blahblah.xls I would like to search only for the first one but Windows Search always returns two results. I have tried these but none of them seem to work: filename:60933 filename:^60933* filename:60933..xls My setup: Windows XP Pro CZ, Windows Search 4, files are located on indexed network share.

    Read the article

  • cpio VS tar and cp

    - by Tim
    I just learned that cpio has three modes: copy-out, copy-in and pass-through. I was wondering what are the advantages and disadvantages of cpio under copy-out and copy-in modes over tar. When is it better to use cpio and when to use tar? Similar question for cpio under pass-through mode versus cp. Thanks and regards!

    Read the article

  • Link aggregation with freebsd8 and a cicso 3550, what am i doing wrong?

    - by Flamewires
    Hey, I am trying to setup Link Aggrigation with LACP (well, anything that provides increased bandwidth and failover using my setup will work). I'm running FreeBSD 8.0 on 3 machines. M1 is running 2 10/100 ethernetcards setup for link aggrigation using lagg. for reference: ifconfig em0 up ifconfig tx0 up ifconfig create lagg0 ifconfig lagg0 laggproto lacp laggport tx0 laggport em0 192.168.1.16 netmask 255.255.255.0 I plugged them into ports 1 and 2 of a Cicso 3550. then ran: configure terminal interface range Fa0/1 - 2 switchport mode access switchport access vlan 1 channel-group 1 mode active (everythings in vlan 1) Now Im able to connect the other computers to other ports on the switch and failover works great, i can unplug cables in the middle of a transfer and the traffic gets rerouted. However, im not noticing any speed increase. My test setup: load balancing: i tried dst and src on the switch, neither seemed to give me a speed increase. I am SCPing 2 500 meg files from the lagg computer to other computers (one each) which are also running 10/100 full duplex cards. I get transfer speeds of about 11.2-11.4 Mbps to a single host, and about half that (5.9-6.2) Mbps when transferring to both at the same time. From what I understood with destination load balancing the router was suppose to balance traffic headed for 1 computer over 1 port and traffic headed for another over a diff(in this case) the other port. With destination-MAC address forwarding, when packets are forwarded to an EtherChannel, the packets are distributed across the ports in the channel based on the destination host MAC address of the incoming packet. Therefore, packets to the same destination are forwarded over the same port, and packets to a different destination are sent on a different port in the channel. For the 3550 series switch, when source-MAC address forwarding is used, load distribution based on the source and destination IP address is also enabled for routed IP traffic. All routed IP traffic chooses a port based on the source and destination IP address. Packets between two IP hosts always use the same port in the channel, and traffic between any other pair of hosts can use a different port in the channel. (Link) What am i doing wrong/what would i need to do to see a speed increase beyond what i could do with just a single card?

    Read the article

  • Trouble with wireless driver on a Dell Latitude D830

    - by Kevin
    After uninstalling Dell's wireless utility I get a new hardware found dialog that can not find any driver for my wifi card on it's own. I'm running Windows XP Professional Service Pack 3, and I would like to use the default wifi handler since dell's utility does not work with my company's wireless switch. I did try downloading the recommend driver from the dell support site Network Adapter 2 Model Intel(R) PRO/Wireless 3945ABG Network Connection Description [12] Intel(R) PRO/Wireless 3945ABG Network Connection Status Connected

    Read the article

  • SConfig - option 12). restore graphical user interface - not present

    - by NickC
    Started off with a Server Core install to which I then added the GUI with: Install-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra So far so good, I then removed the GUI again to get back to text only mode with: Remove-WindowsFeature Server-Gui-Shell, Server-Gui-Mgmt-Infra Now at this point I should beable to use SConfig option 12 to reinstall the GUI again but that SConfig option is missing: "12) Restore Graphical User Interface (GUI)" not present, how can I get SConfig to display this option? Has anyone else noticed that this option is missing. Thanks, Nick

    Read the article

  • Uninstall Java on Mac OS X?

    - by Jesse
    I'm working on a trouble shooting document for some desktop software that runs in Java. One of the last resort steps is to completely uninstall and reinstall the Java runtime. In Windows XP this can be done via Add/Remove Programs. Is there something equivalent on OSX? Or does reinstalling the runtime overwrite the current version?

    Read the article

  • Does exists a software that act as DHCP service?

    - by marco.ragogna
    I need to configure a network made by a simple old hub with 24-ports a server and some clients. Both clients and server has Windows XP or later. If all clients has the DCHP service enabled does exists a software that, installed on the server, assigns automatically to the clients an IP based on a predefined range?

    Read the article

  • FTP not listing files behind firewall (setsockopt (ignored): Permission denied)

    - by KennyDs
    We are developing a Magento application that has a module that works with FTP. Today we deployed this on the testing environment which is setup in the following way: Gateway server which has the following iptables rules: # iptables -L -n -v Chain INPUT (policy ACCEPT 2 packets, 130 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 165 13720 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED Chain FORWARD (policy ACCEPT 7 packets, 606 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- eth1 eth0 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 15 965 ACCEPT all -- eth0 eth1 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- eth1 eth1 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 126 packets, 31690 bytes) pkts bytes target prot opt in out source destination These are set at runtime via the following bash script: #!/bin/sh PATH=/usr/sbin:/sbin:/bin:/usr/bin # # delete all existing rules. # iptables -F iptables -t nat -F iptables -t mangle -F iptables -X # Always accept loopback traffic iptables -A INPUT -i lo -j ACCEPT # Allow established connections, and those not coming from the outside iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the LAN side. iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT # Masquerade. iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE # Don't forward from the outside to the inside. iptables -A FORWARD -i eth1 -o eth1 -j REJECT # Enable routing. echo 1 > /proc/sys/net/ipv4/ip_forward The gateway server is connected to the WAN via eth1 and is connected to the internal network via eth0. One of the servers from eth1 has the following problem when trying to list files over ftp: $ ftp -vd myftpserver.com Connected to myftpserver.com 220 Welcome to MY FTP Server ftp: setsockopt: Bad file descriptor Name (myftpserver.com:magento): XXXXXXXX ---> USER XXXXXXXX 331 User XXXXXXXX, password please Password: ---> PASS XXXX 230 Password Ok, User logged in ---> SYST 215 UNIX Type: L8 Remote system type is UNIX. Using binary mode to transfer files. ftp> ls ftp: setsockopt (ignored): Permission denied ---> PORT 192,168,19,15,135,75 421 Service not available, remote server has closed connection When I try listing the files in passive mode, same result. When I run the same command on the gateway server, everything works fine so I believe that the issue is happening because of the iptables rules not forwarding properly. Does anyone have an idea which rule I need to add to make this work?

    Read the article

  • Any ideea why every NSIS setup file(.exe) i download gives CRC error?

    - by daniels
    Any ideea why every NSIS setup file(.exe) i download gives CRC error when trying to install. I do not have any firewall installed and also i tried with and withouth a download manager. Also files downloaded with bittorrent have crc errors. But this happens only with setups that were made with NSIS and only on windows 7, on XP they work fine and aloso any other files work except those made with NSIS.

    Read the article

  • Utility to Monitor Kill / Restart Rogue Process?

    - by Sean O
    Hi, I need a Windows (XP/7) utility to continuously monitor always-running processes and kill them (and optionally restart them) if they hang. There are a lot of interactive tools out there (Sysinternals, most notably). But I have a program on a little-used workstation that needs to run continuously and reliably, both of which are not two of its strong suits :) It requires continual babysitting, and I'd rather just have a monitoring utility (even a paid one) that can kill/restart it on definable conditions -- e.g. CPU 80%, Status of "Not Responding", etc.

    Read the article

  • How to rectify FDQN error in mirroring?

    - by krishna chaitanya
    While establishing mirroring without witness at last step i am getting an error: One or more of the server network addresses lacks a fully qualified domain name (FDQN). To start mirroring without using a FQDN, click "yes". To specify the FDQN, click "no". Then specify every TCP address by using the syntax for a fully qualified TCP address, and click Start mirroring again. TCP/IP are in enabled mode in Computer management. How to rectifity this error?

    Read the article

  • Windows 7 Start Menu All Programs - display all folders, not just a single scrollable column

    - by PP
    In Windows 95/XP/Vista I could click on the start menu, "All Programs", and I would get a list of all my programs. In Windows 7 when I click start menu, "All Programs", I get a single column with a scroll bar - but that's not what I want, I want to see All Programs. How do I do this? I've looked in the start menu options but cannot find an option that appears to show me all my programs.

    Read the article

< Previous Page | 339 340 341 342 343 344 345 346 347 348 349 350  | Next Page >