Search Results

Search found 13904 results on 557 pages for 'host on demand'.

Page 345/557 | < Previous Page | 341 342 343 344 345 346 347 348 349 350 351 352  | Next Page >

• Ubuntu 10.04 recognizing USB 2.0 external HD as USB 1.1

  - by btucker

  When I connect the USB 2.0 drive I see this: usb 1-4.3: new full speed USB device using ohci_hcd and address 5 so I know it's getting seen as USB 1.1. usb-devices shows that it really is USB 2.0 and connected to a USB 2.0 hub: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 4 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05e3 ProdID=0608 Rev=77.61 S: Product=USB2.0 Hub C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=13fd ProdID=1340 Rev=02.10 S: Manufacturer=Generic S: Product=External C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage It seems the problem is that root hub is: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev=02.06 S: Manufacturer=Linux 2.6.32-25-server ohci_hcd S: Product=OHCI Host Controller S: SerialNumber=0000:00:02.0 C: #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub And there's no mention of ehci_hcd. lsusb -t gives me: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M |__ Port 4: Dev 2, If 0, Class=hub, Driver=hub/4p, 12M |__ Port 2: Dev 4, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 3: Dev 5, If 0, Class=stor., Driver=usb-storage, 12M |__ Port 6: Dev 3, If 0, Class=stor., Driver=usb-storage, 12M It seems like I'm missing something which would allow the OS to see USB 2.0 devices. Can anyone point me in the right direction? EDIT Full lsusb -v output: Bus 001 Device 005: ID 13fd:1340 Initio Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x13fd Initio Corporation idProduct 0x1340 bcdDevice 2.10 iManufacturer 1 Generic iProduct 2 External iSerial 3 57442D574341595930323337 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x05e3 Genesys Logic, Inc. idProduct 0x0608 USB-2.0 4-Port HUB bcdDevice 77.61 iManufacturer 0 iProduct 1 USB2.0 Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x00e0 Ganged power switching Ganged overcurrent protection Port indicators bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 100 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0103 power enable connect Port 3: 0000.0103 power enable connect Port 4: 0000.0100 power Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.32-25-server ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:02.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 10 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0103 power enable connect Port 5: 0000.0100 power Port 6: 0000.0103 power enable connect Port 7: 0000.0100 power Port 8: 0000.0100 power Port 9: 0000.0100 power Port 10: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled

  Read the article

• PHP Mail Relay via Remote smtp Server

  - by Toqeer

  We have a php application running on Linux which sends emails to there users. Currently its setup like php.ini is configured to send via local sendmail server but we have separate mail server for our organization for this domain. I want to send the php application emails via that remote smtp server so these emails can have the correct SPF records and sign via DKIM. But I could not see such option in php.ini to specify the remote host address to forward emails to that, its for windows only. I saw some post which suggest phpMailer but I could not find how to configure that so all our php application could send via our remote SMTP.

  Read the article

• FTP - 530 Sorry, the maximum number of clients...?

  - by aSeptik

  Hi All! i know this is not a properly code question, but who of you don't use an FTP client!? ;-) Ok my problem is that my FTP work great, exept when i upload files on a particular client server! on this server happen that some files are uploaded fine and others not, they stop while uploading at half of it's size, then this error is displayed: 530 Sorry, the maximum number of clients (4) from your host are already connected. Unable to make a connection. Please try again. Obviously this is not true, i'm the only one that is uploading! Anyone had the same experience with this!? PS: i have tried many different FTP, all display the same error or just hung up! Thank's

  Read the article

• Installing Collective Access

  - by Michele

  I am VERY new to installing any type of server program and to running any opensource type software in general. I am running Windows Server 2008R2. I want to install Collective Access to run locally only on my Intranet at home. So my host is localhost I sucessfully installed PHP and MYSQL. I installed CA in this directory C:/inetpub/wwwroot/collectiveaccess. 1st. I do not want to send mail through collective access. Will it install without all the email information? Can I comment those requirements out in the global config and setup.php file? 2nd I am getting the error. Configuration file is missing for hostname 'localhost' this is what I have in the set up file: define("CA_WEB_ROOT_DIR", "c:inetpub/wwwroot"); define("CA_URL_ROOT", "/collectiveaccess"); define("CA_SITE_HOSTNAME", "localhost"); define("CA_DB_HOST", 'localhost');

  Read the article

• apache redirect to https for basic auth

  - by shreddd

  I have a tricky variation on an old problem. I have an apache based site that should generally be accessed via http/port 80. However for certain areas protected areas that require authentication (designated by .htaccess), I want to be able to redirect the user the https/port 443. The key here is that I want this to always happen - i.e. I don't want to have to rewrite each htaccess file with a redirect. I only want to enforce this for basic authentication and the protected areas are scattered all over the site. Is it possible to somehow redirect all basic authentication requests to the SSL host?

  Read the article

• Unable to connect guest using VMWare Player

  - by eLAN

  I'm running RedHat server 5.3 as guest on Window XP VMware palyer. the network setting is set to "Host Only", but I have tries all other settings. I'm able to ping the guest machine, but I'm unable to connect it in any other way including webserver, Tomcat, Telnet, ssh. all of the services above are working from within the guest (using localhost). Guest firewall and SELinux are disabled. any idea on what I should check next? every idea will be appreciated... thnaks Ilan

  Read the article

• What to do if I get ping results for non-existing hosts?

  - by bublegumm

  When I am pinging non-existing host like 'zzz' or 'qwerty' I am getting the following result Pinging zzz.kanisa.com [209.62.20.200] with 32 bytes of data: Reply from 209.62.20.200: bytes=32 time=60ms TTL=46 Reply from 209.62.20.200: bytes=32 time=66ms TTL=46 It looks like a virus to me. But I was unable to find a solution on web. Any ideas how to fix it? Even more ridiculous results with nslookup C:\> nslookup google.com Server: google-public-dns-a.google.com Address: 8.8.8.8 Non-authoritative answer: Name: google.com.kanisa.com Address: 209.62.20.200 How to get rid of it?

  Read the article

• How do I troubleshoot CanoScan LIDE20 on Ubuntu 9.10 in VirtualBox?

  - by kara-marfia

  This may be a VirtualBox question more than anything else. The host OS is Win7, which sees the scanner, but has no drivers for it. VirtualBox sees & recognizes the scanner as "Cannon Scan" and shows "state captured" when I hover over USB devices. Searching gives me many happy reports of this particular scanner being well supported, and that SANE should work with it immediately (also listedin the Supported Hardware List. I get "no devices available" from XSane... and I'm not sure where else I can check. I'd like to see if VirtualBox is telling the truth and find out if the USB port is actually being fed into the virtual OS. Can anyone point me in the right direction of where/how to do that in Ubuntu? Or other bright ideas. I'm starting with a little project to add some zing to my beginner linux studies - I'm sure I haven't checked some obvious things, because I don't know them yet. ;)

  Read the article

• Does SQLIO lie when run from a Hyper-V guest on a VHD?

  - by ScottStonehouse

  SQLIO seems like a useful tool. I thought it would be interesting to try to measure the speed difference between a physical disk and a VHD. So I ran SQLIO on the Hyper-V host on the physical drive. Results seemed reasonable. Then I ran it from the guest to test the vhd (on the same physical disk). I expected it to be a bit slower. But instead it was way faster - like 0ms average latency. So I'm trying to learn something here. It seems like hyper-v is fooling SQLIO somehow but I don't understand it well enough to figure it out. It's a dynamic vhd, no snapshots or anything, and the vhd is the only file on the disk. The physical disk is actually a two SAS drive RAID 1.

  Read the article

• Squid throws error, The requested URL could not be retrieved

  - by Supratik

  Sometimes I am getting the following error The requested URL could not be retrieved While trying to retrieve the URL: http://groups.google.com/ The following error was encountered: Unable to determine IP address from host name for groups.google.com The dnsserver returned: Refused: The name server refuses to perform the specified operation. This means that: The cache was not able to resolve the hostname presented in the URL. Check if the address is correct. Your cache administrator is root. What could be the reason for the above error ? Regards Supratik

  Read the article

• SSH + MysqlDump Remote Backup Script

  - by bundini

  I'm trying to issue a remote mysqldump command, redirect stdout to a dmp file, then tar that up. I'm a bit confused as to how to do the redirection bits over ssh: i.e. ssh [email protected] mysqldump $dbname -u admin -p > dbdump.dmp && tar cvzf dbdump.tar.gz dbdump.dmp Issues: 1) I'm not providing the password because I want it to prompt me. Will an ssh remote command deal with this? 2) What's the deal with the syntax? Do I want to use quotations, or don't I? What happens with the redirects and pipes? Do those have to be escaped or formatted in some special fashion.

  Read the article

• Emulating CP/M under Linux

  - by gh403

  I need to be able to run a very old piece of software -- the HI-TECH z80 C Compiler for CP/M. It has been released as freeware by HI-TECH. Alas, it only runs on CP/M. After a lot of Googling, I found a page of utilities for UZIX. One of those utilities is a script to abstract away the emulation of a CP/M machine, thus allowing you to use the compiler as you would any other UNIX program. The problem with this script is that it depends on their own CP/M emulator, which unfortunately will not compile on a modern (x64) system. My question: is there a usable CP/M emulator for Linux that could be used in a similar fashion? Specifically, I need to be able to somehow have it access files from the host system, a la DOSBox. I'm willing to rewrite a script (I don't have to re-use the UZIX one); I just need an emulator. Thanks for any help!

  Read the article

• Wiki on a pendrive - should work with any OS

  - by Florian Pilz

  Hello, I want to have an "extended memory" and want to accomplish that with an wiki on an pendrive. I already decided to use PmWiki, but if another wiki solves my problem that would be fine. The issue is: If I install an Apache on an pendrive, it depends on the running operating system. Because I'm using Windows & Linux (and will use Mac in the future) it is crucial for me to be platform independent. I read this article. DokuWiki is for Windows only and MoinMoin needs Python installed (which would be possible on my PCs, but not on public ones). Every help for my "extended memory" is appreciated. PS: As a last resort I could host a wiki on my webpage, which would be accessible everywhere. But I just see a challenge in trying it on a pendrive.

  Read the article

• Which AMI should I use as a base for a Django application?

  - by Edan Maor

  I'm starting development of a Django application, on Amazon's Web Services. I'm looking to build an instance that will serve the Django. I don't have much experience with such things, having only used a shared host before (WebFaction). So I'm wondering, which AMI should I use as a base? I'm assuming I want an Ubuntu AMI, possibly with certain things like Apache pre-installed? One minor point: I'm planning to serve several different Django projects from the same instance. I use virtualenv on my dev machine right now to separate the different projects, I'm assuming I'll do the same on EC2. Thanks!

  Read the article

• Freebsd 7.2: View firmware version for disks?

  - by Stefan Lasiewski

  I'm running FreeBSD 7.2, with Seagate Cheetah (Model ST####) drives. We are having some problems with the SCSI drives on these machines. Our vendor says that updating the firmware on the drives may fix the problems, and a firmware update did seem to fix some SCSI problems on another FreeBSD host. How can I view the firmware version of these drives? I tried some tips from nixCraft, but nothing has worked so far. In dmesg, I see the Make and Model, but In Linux, this information is often in /var/log/dmesg (Although /var/log/dmesg is sometimes out of date), or I often find this information with something like sudo lshw -class disk, lshal or dmidecode.

  Read the article

• Microsoft Cluster or Oracle Fail Safe error

  - by osdm

  Trying to get Oracle Database 10g to work on Microsoft cluster (using Oracle Fail Safe, not RAC). Everything installed, but when trying to verify group or add database to group I get following error: FS-10220: Network name MSK00-NST01-1 maps to IP address 10.1.11.74 in the cluster resource but maps to IP address 10.1.1.74 on the system MSK00-NST01-1 is cluster name, 10.1.11.74 is first node IP, 10.1.1.74 is second node IP. Oracle documentation says "The cluster and the system must have the same IP address mapping for a network name. Check that either the network name server or the local host file has the same IP address mapping as the cluster." Where is the error - in Oracle configuration or in cluster configuration? What are possible ways to correct it? Thanks a lot for any ideas.

  Read the article

• Dovecot immediately logs off user

  - by nona urbiz

  I'm trying to set up email on my server, and have successfully set up POP3 with gmail for my main account. When attempting to set up another user though, gmail reports ` There was a problem communicating with dylanstestserver.com. I can't figure out why it's working for me and not the other users. I do receive email sent to the address on the server. One suggestion I found online was to try logging in over telnet, but strangely, it kicks me off right after I log in. dylan~$ telnet dylanstestserver.com 110 Trying 50.16.219.8... Connected to dylanstestserver.com. Escape character is '^]'. +OK Dovecot ready. user dylanstestemail +OK pass password +OK Logged in. Connection closed by foreign host. thanks for any ideas and help

  Read the article

• Making internal website available publicly (Win 2008 Server)

  - by endigo

  I have an IIS 7 web site that is running on a Windows 2008 Server (64-bit) VMWare on a Windows 2008 Server (64-bit) Host on my local network. My router is a Firebox XEdge and it has port 80 directed to the IP of the server on VMWare. I can reach the web site from inside the network, but I cannot reach the site from outside the network. I have other web sites that are working through the Firebox, and I am confident that it is configured correctly. I suspect that Windows 2008 server is blocking routed or public addresses, but I have shut down the firewall on the Server that is running on VMWare and the AVG Anti-virus to no avail. How can I make my site available publicly.

  Read the article

• Logon Failure: the target account name is incorrect after making a ghost image of a server

  - by cop1152

  I recently replaced a failing SCSI drive in a Windows 2000 server with an IDE drive. I made an image of the SCSI drive and Ghosted it. The purpose of the machine was to give out DHCP at one location and host a couple of files. When I restarted the machine with the new drive, DHCP appears to be working fine, but I cannot get to any of the shares. Instead, I get the following message when attempting to navigate using Explorer. Logon Failure: the target account name is incorrect It appears that this machine is not communicating with the main domain controller. Changes to user accounts (performed on the domain controller) are not replicated on this machine.

  Read the article

• Cannot ssh anymore into FreeBSD 7.2 home server

  - by Gabi

  Somehow sshd stopped running and no amount of start, restart or onestart will make it go again. I normally ssh into it from a dual-boot laptop computer that shows up on the network as gabi-buntu when running Ubuntu Karmic, and as gabi-pc when running Windows XP Pro. Neither my Putty connection nor the Linux terminal can establish a ssh link anymore. Upon rebooting the server, I am greeted with "/etc/rc: WARNING: run_rc_command: cannot run /usr/sbin/sshd". In addition, a message will appear saying things like rpc.statd: failed to contact host gabi-buntu RPC: port mapper failure RPC: timed out Everything else works fine. The FreeBSD 7.2 box runs a print server, a Samba server, and an Apache server for the home wiki, via https. It also serves up NFS shares for Linux clients. Any suggestions? Thank you, Gabi Huiber

  Read the article

• nagios: trouble using check_smtps command

  - by ethrbunny

  I'm trying to use this command to check on port 587 for my postfix server. Using nmap -P0 mail.server.com I see this: Starting Nmap 5.51 ( http://nmap.org ) at 2013-11-04 05:01 PST Nmap scan report for mail.server.com (xx.xx.xx.xx) Host is up (0.0016s latency). rDNS record for xx.xx.xx.xx: another.server.com Not shown: 990 closed ports PORT STATE SERVICE 22/tcp open ssh 25/tcp open smtp 110/tcp open pop3 111/tcp open rpcbind 143/tcp open imap 465/tcp open smtps 587/tcp open submission 993/tcp open imaps 995/tcp open pop3s 5666/tcp open nrpe So I know the relevant ports for smtps (465 or 587) are open. When I use openssl s_client -connect mail.server.com:587 -starttls smtp I get a connection with all the various SSL info. (Same for port 465). But when I try libexec/check_ssmtp -H mail.server.com -p587 I get: CRITICAL - Cannot make SSL connection. 140200102082408:error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol:s23_clnt.c:699: What am I doing wrong?

  Read the article

• Self-hosted browser-based remote desktop script?

  - by rlsaj

  I need a self-hosted browser based remote desktop script that will connect me from any PC to my work PC. I need to either host this script within my own dedicated hosting or on my work PC. The PC that I need to remote into is always the one PC (Win7) and the IP never changes, and I have access to the Router/Firewall within. I have tried many remote desktop services and applications - LogMeIn, Team Viewer, (Ultra/Tight) VNC, GoToMyPC and iTeleport Connect and even Windows Remote Desktop - and the web services (or ports) are blocked at whatever free wi-fi/hotel/coffee shop I am at. Note that I will need to be able to access this from any PC, so I won't be able to install any applications (or use any portable software) - hence my thinking that it will need to be browser based on a standard (not blocked) port. If I can set up a web based remote desktop application - really a homebrew LogMeIn - then I should solve my problem. What is the best option here?

  Read the article

• send email from linux

  - by mustapha georges

  I built a Linux server (CentOS). I have an application that sends email using the Zemd_Mail class which uses SMTP. The application configuration asks for Host Port Return path (Y/N) but does not provide explanation. What do I need to set this up? Can I use a gmail account to forward the mail? When I try to send mail now, it does not arrive. I get this log in /var/log/maillog Nov 7 21:50:26 localhost sendmail[8328]: qA82oQEP008328: to==?utf-8?B?bWFydGluLmN5dHJ5bmJhdW0=?= <[email protected]>, ctladdr=apache (48/48), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30467, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (qA82oQHr008329 Message accepted for delivery)

  Read the article

• dhclient and dhcpcd the real difference

  - by rubixibuc

  I can't figure out the difference from just the man pages. I can see what is a daemon and one is a client, but what does that mean practically when using the commands? Also what is the difference between the client and daemon in this case, not just the terms (client and daemon) but functionally wise? EDIT: How are the tasks divided, if the client updates the information on the client, what is the purpose of the daemon. I'm talking about the client daemon in this case dhcpcd not dhcpd. Both come installed by default with some versions of Linux and seem to share the duties of the dhcp client. NAME dhcpcd - DHCP client daemon Name dhclient - Dynamic Host Configuration Protocol Client

  Read the article

• How to use UMLFS?

  - by Vi

  I'm trying to mount what is inside UML session as FUSE filesystem on host. There's "uml_mount" program which looks like a thing for this purpose, but it fails. What is UMLFS (I haven't found any documentation at all) and how to mount it? uml_mount mounts FUSE filesystem and starts uml_mconsole <umid> umlfs <file descriptor> which tries to send this file descriptor to UML kernel (to deal with further FUSE things), but sending fails. Also I haven't found any signs of FUSE inside a kernel. Do I need some special patch for this?

  Read the article

< Previous Page | 341 342 343 344 345 346 347 348 349 350 351 352  | Next Page >