Search Results

Search found 48664 results on 1947 pages for 'internet access'.

Page 346/1947 | < Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >

• is it possible in this case to get two IPv6 networks to communicate over the IPv4 Internet?

  - by user239167

  I have a setup of a laptop connected to a cellular IPv4 network (3G usb dongle) and PC connected to another IPv4/IPv6 network. Both have been configured to run as IPv6 routers and each has its IPv6 network. The laptop connects to the Internet via the 3G network with IPv4 address (private one and it is mostly changing) on one interface and has the other interface on AP mode providing its own private IPv6 network (2001:db8:444::/64). The PC connects to the Internet via the organization network with both public IPv4 and IPv6 addresses on one interface and has the other interface on AP mode providing its own private IPv6 network (2001:db8:222::/64). Both running Linux Ubuntu. Is it possible to get the two IPv6 network (2001:db8:222::/64 and 2001:db8:444::/64) to communicate over the IPv4 Internet? Is openvpn of any good in this case to get IPv6 traffic over IPv4-IPv4 tunnel? Thanks for helping in advance

  Read the article

• How can I disable internet for a specific interface in Windows 7?

  - by MGSoto

  I have two NICs on my machine, one which connects to my network and has my internet connection. The other connects to a buddy next doors network with his internet connection. I don't want Windows magically deciding which internet connection to use, I want it to use mine. I've had some success by blanking out DNS servers for his connection, but then I also lose hostname resolution on his network and I realize this doesn't solve everything 100%. How can I force Windows to use only my connection while avoiding the use of a router?

  Read the article

• Use 2 wireless adapters to connect to 2 WIFI networks (local and internet) simultaneously?

  - by Mouad

  On my HP Compaq 6710b there's an internal WIFI network adapter. Attached to the same laptop there's also an external USB Alfa WIFI adapter. I live near campus and can pick it's WIFI signal. The problem is that when I am connected to the Internet Wifi using the internal adapter, and then connect to the home (non-internet) Wifi network's router, I lose the connection to the internet (it stays connected, but there's no actual connection). So how can I use the two adapters to connect to both networks successfully ? The router is Belkin N150 Enhanced Router Model F6D4230-4 V1 The external adapter is: ALFA AWUS 036NHR

  Read the article

• How long is the Windows 8 activation period if I do not connect to the internet?

  - by Moab

  This is not a duplicate of this question, since the OP had already connected to the internet. I installed Windows 8 Consumer Retail and was not connected to the internet, and remain unconnected so it cannot automatically activate. How long can I use Windows 8 this way (never connected to the internet) and without activating the license? I want documentation links, not just an answer you think is true or read somewhere, back up any statements with clear documentation please. Answers related to Vista-W7 activation or commands used in Vista-W7 to check license status are not acceptable as Microsoft completely changed activation technologies for windows 8.

  Read the article

• How can I access one desktop session from another on the same machine?

  - by d3vid

  I want to run a desktop session as user A, and from that session access a different desktop session as user B. This way I can test, screencast or share my screen from session B, while having access to apps/resources in session A that I do not want running/visible in session B. What application can I do this with? I assume some kind of a remote desktop client/server is what I'm looking for. So far I have tried: VNC. Logged in as user A and user B. In session B run Desktop Sharing. Switched to session A. Tried to access share with Remmina. Failed. (Can get image to appear but it's frozen.) x2go. Installed server and client from stable PPA (needed a workaround for installation to succeed). Created a connection which starts then fails instantly. Discovered mailing list post suggesting that accessing localhost is not supported. On the non-remote front: VirtualBox. Created a minimal virtual machine for session B. Too resource heavy. Am I attempting the impossible? Should I be looking for something other than a remote desktop tool?

  Read the article

• How do I access shared folders on Ubuntu server from Mac OS?

  - by Stephen

  I have an old dell desktop running ubuntu 11.04, I also have samba installed on it. I'm trying to access the shared folders on the Ubuntu machine from my Mac, so I go into 'Finder', click on 'Go' and 'Connect to Server'. I type in the ip address of the ubuntu machine smb://xxx.xxx.x.xx and click connect, I can then see the list of shared folders from the ubuntu machine so I know its making a connection. But when I access the 'Music' folder I get an error message stating: There was an error connecting to the server "xxx.xxx.x.xx". Check the server name or IP address, and try again. Any thoughts anyone ? EDIT I have a external hard drive attached to the server, and the folders I'm trying to access are located on that external hard drive. The location of the folder is /media/HD-CELU2/test, so I think the path from Finder should be smb://xxx.xxx.x.xx/media/HD-CELU2/test, but having tested this, I'm still not getting in. P.S. I'm using Samba as I have a Windows machine on my home network as well.

  Read the article

• Cannot access personal website from home IP. More details inside.

  - by GX67

  This is a recent problem I've been having. My site can be accessed from almost everywhere else except from my home IP, where I do most of my editing/updating, etc. I've tested my connection from my school's network, a friend's connection from out of state (multiple states), and through a tethered connection with my friend's Android. It works in all those cases, both viewing, accessing the cPanel, and using FTP. Here's the problem that happens to me when I try to view it from my home IP: The page times out in Firefox, IE, and Chrome. Using the cmd, I ran tracert and ping, both as failed attempts. Log here. downforeveryoneorjustme.com says my site is up. So do the other site checkers. I can't access my cPanel or FTP accounts. I can't access the host site. (I use perfectz.info for hosting, and I can't access their site either.) System settings: No firewall enabled. Ports are seemingly properly forwarded. (e.g. The ports are open in the router settings, and are open everywhere else.) I have an email forwarder set up from the cPanel that works just fine. (i.e. I can receive emails sent to that address. If any other information is needed, I'll do my best to provide it. UPDATE @ilhan: I use two things: 1) The site cPanel from in-browser. 2) Dreamweaver CS5 FTP. @Matthias: I tested both, and it passes the dual stack with a 10/10. What should I do then?

  Read the article

• What is an effective way to convert a shared memory-mapped system to another data access model?

  - by Rob Jones

  I have a code base that is designed around shared memory. Each process that needs to access the memory maps it into its own address space. The data structures in the shared memory are directly accessed, that is, there is no API. For example: Assume the following: typedef struct { int x; int y; struct { int a; int b; } z; } myStruct; myStruct s; Then a process might access this structure as: myStruct *s = mapGlobalMem(); And use it as: int tmpX = s->x; The majority of the information in the global structure is configuration information that is set once and read many times. I would like to store this information in a database and develop an API to access the database. The problem is, these references are sprinkled throughout the code. I need a way to parse the code and identify global structure references that will need to be refactored. I've looked into using ANTLR to create a parser that will identify references to a small set of structures and enter them into a custom symbol table. I could then use this symbol table to identify which source files need to be refactored. It looks like a promising approach. What other approaches are there? Of course, I'm looking for a programmatic approach. There are far too many source files to examine each one visually. This is all ordinary ANSI C. Nothing else.

  Read the article

• Wireless device bug on 13.10. BCM4313 registers as eth1 instead of wlan0 and no internet access

  - by user205691

  My Hotel wiFi requires me to login with a username & password after connecting to the hotspot. So, my browser would open a page with username & passwrd fields to login and then connect to internet. But unfortunately, firefox & chromium dont seem to work. i dont think it is browser related but a setting for the wifi router or driver which is creating this issue. using Broadcom 801.11 STA wireless driver (proprietary). tried open source as well but same result !! The image linked below shows my wifi connection setting & Chromium. The login page itself comes up after a long time and after entering the credentials, it keeps loading for ever !! it is the same case for every other browser.. so i dont think its browser issue but something to do with wifi setting or network manager stuff.. interestingly, i am able to connect to WiFi networks with WPA key without any issue. Adhoc hotspot is a problem and that is my regular home network :( .. I hope i can get some help solving this issue ! I have tried repeating the same hotspot after login from my android, by creating a virtual repeater with WPA key and it works. I can browse on ubuntu using this method.. but cant be doing this regularly ! I tried loading the same login page of the hotel wifi while browsing through my repeater wifi created on mobile and screen shot attached below. the page loads up quick and easy.. so this means something is wrong with the way network manager handles adhoc connectivity & login ?? i installed wicd0 but it crashes on startup and not helpful at all ! Screenshot of Chromium page Login page with repeated hotspot ifconfig in my terminal results: krishna@krishna-HP-ENVY-4-Notebook-PC:~$ ifconfig eth0 Link encap:Ethernet HWaddr 28:92:4a:1d:54:fa UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr e0:06:e6:89:fa:49 inet addr:10.24.1.71 Bcast:10.24.1.255 Mask:255.255.255.0 inet6 addr: fe80::e206:e6ff:fe89:fa49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10940 errors:0 dropped:0 overruns:0 frame:348431 TX packets:6611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7669631 (7.6 MB) TX bytes:864195 (864.1 KB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2146 errors:0 dropped:0 overruns:0 frame:0 TX packets:2146 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:166120 (166.1 KB) TX bytes:166120 (166.1 KB) I wonder why is the wireless configured under eth1 ? I think this is a bug with earlier ubuntu versions, but is this normal in 13.10 or is there a wrong configuration here ? The wireless device in my pc is BCM4313 and i have installed the bcmwl-kernel-sources, wireless-tools to support the device. i also reinstalled the bcmwl-kernel as suggested on broadcom website, via synaptic package manager. Nothing has changed this situation ! I tried booting into liveUSB and then ifconfig results show wireless under wlan0. But then the wireless connects and loads the login page. So is the problem with the device configuration now ? i really want to get this fixed before i start configuring the other stuff like ATI graphics and such on the laptop for overheating.. lack of internet access is too bad a bug for me :P any help is appreciated!

  Read the article

• What credentials should I use to access a Windows share?

  - by JMCF125

  H
  i, I have installed Samba and CIFS and all that, followed a bunch of tutorials, but still I can't access a share in the separate Windows 7 machine. Before I could access a share in Ubuntu from Windows, but although now I can't for whatever reason; the error of the attempt to mount the Windows share is the same: 13, asking for credentials (the computer with Windows is off now, but I can add the exact error message later). In /etc/fstab I have: # ... (help info) ... # <file system> <mount point> <type> <options> <dump> <pass> # ... (mounting points that don't matter for the question) ... //192.168.1.2/C\:/Users/Public/Documents /srv/Z\:/ cifs user=guest,password=,uid=1000,iocharset=utf8 0 0 I also tried options such as username=guest,uid=1000,iocharset=utf8 and guest,uid=1000,iocharset=utf8, which, of course, don't work. What user am I supposed to use? (user=user; username=user; my credentials in the Windows and Ubuntu machines do not work, at least with the syntax I tried - similar to this). Even if this worked it's not actually what I want. I wanted to setup an authentication for any one trying to access the drive (it's currently 777, for the Linux share as well) and put a limit/quota on the share's use (as I see Z:on Windows, it allows for the entire C:drive to be filled). Thank you in advance. I'd be glad if you suggested a way to do this even without the last paragraph.

  Read the article

• Coherent access to mainframe files from Win32 application and IBM RDZ/Eclipse?

  - by Ira Baxter

  I have a suite of tools for processing IBM COBOL source code; these tools are built as Win32 applications and talk to Windows (including network) files using traditional Windows file system calls (open, close, read, write) and work just fine, thank you. I'd like to integrate these with Eclipse; we understand how to get Eclipse to do UI for us we think. The problem is that Eclipse/RDZ users access mainframe files through some IBM magic. In How does RDZ access mainframe files I tried to understand how Eclipse accessed files on a mainframe. Apparantly Eclipse/RDZ has a secret filesystem access backdoor not available to normal mortals. At issue is how our tools, reading some Windows-accessible file (local disk file, NFS to mainframe, ...) can associate such files with the files that Eclipse can access or is using? Ideally we'd like UI-integrated versions of our tools take an Eclipse file-name string for a mainframe file, pass it to our Windows application to process, have the Windows application open/read/process the file, and return results associated with that file to the Eclipse UI. Is there a canonical file name path that would be used with mainframe NFS that would be equivalent to the name or access object the Eclipse RDZ used to access the same file? Are all operations doable internally by Eclipse, doable by the mainframe NFS [for instance, can NFS read/update an element in a partitioned data set? Can Eclipse RDZ? Does it matter?] Is the mainframe file access available to custom Java code running under Eclipse RDZ (e.g., equivalents of open/close/read/write based on filename/path/something?) If so, can somebody steer me towards documentation describing the access methods? Anybody else already solve this problem or have a good suggestion?

  Read the article

• Understanding packet flows over RVI

  - by choco-loo

  I'm trying to get a full grasp of firewall filters and how to apply them on a Juniper EX4200 switch - to be able to block ports, police traffic and shape traffic. The network architecture is as follows internet >-< vlan4000 >-< vlan43 vlan4000 is a public "routed" block (where all the IPs are routed to and the internet gw is) vlan43 is a vlan with public IPs with devices (servers) attached There are static routes and RVI's on the EX4200 to send all traffic via vlan4000's gateway to reach the internet. I've set up filters on both input and output of the respective RVI's and VLAN's - with simple counters, to measure traffic flow from a server inside of vlan43 and a server on the internet. Using a combination of iperf for UDP and TCP tests and fping for ICMP tests - I observed the following, icmp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 100 100 unit43-counter-out 0 0 vlan4000-counter-in 6 4 vlan4000-counter-out 107 104 vlan43-counter-in 101 100 vlan43-counter-out 100 100 tcp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 73535 38480 unit43-counter-out 0 0 vlan4000-counter-in 7 8 vlan4000-counter-out 73543 38489 vlan43-counter-in 73535 38481 vlan43-counter-out 38938 75880 udp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 81410 1 unit43-counter-out 0 0 vlan4000-counter-in 18 7 vlan4000-counter-out 81429 8 vlan43-counter-in 81411 1 vlan43-counter-out 1 85472 My key goals are to set up a few filters and policers, as there will be many more VLANs - that all need protecting from each other and the internet. Then globally limit/police all outbound traffic to the internet Block inbound ports to vlan43 (eg. 22) Limit outbound traffic from vlan43 (to the internet) Limit outbound traffic from vlan43 (to other vlans) Limit outbound traffic from vlan4000 (to the internet from all vlans) Route traffic from vlans via specific routing instances (FBF) The question What I want to understand is why there isn't ever any activity on unit4000 or vlan4000 inbound or outbound counter - is this because there isn't a device on this VLAN - and that the traffic is only traversing it? And with regards to the TCP test - why is there twice as many packets on unit43-counter-in, vlan4000-counter-out and vlan43-counter-in - is this counting both the inbound and outbound traffic?

  Read the article

• Redirect all access requests to a domain and subdomain(s) except from specific IP address? [closed]

  - by Christopher

  This is a self-answered question... After much wrangling I found the magic combination of mod_rewrite rules so I'm posting here. My scenario is that I have two domains - domain1.com and domain2.com - both of which are currently serving identical content (by way of a global 301 redirect from domain1 to domain2). Domain1 was then chosen to be repurposed to be a 'portal' domain - with a corporate CMS-based site leading off from the front page, and the existing 'retail' domain (domain2) left to serve the main web site. In addition, a staging subdomain was created on domain1 in order to prepare the new corporate site without impinging on the root domain's existing operation. I contemplated just rewriting all requests to domain2 and setting up the new corporate site 'behind the scenes' without using a staging domain, but I usually use subdomains when setting up new sites. Finally, I required access to the 'actual' contents of the domains and subdomains - i.e., to not be redirected like all other visitors - in order that I can develop the new site and test it in the staging environment on the live server, as I'm not using a separate development webserver in this case. I also have another test subdomain on domain1 which needed to be preserved. The way I eventually set it up was as follows: (10.2.2.1 would be my home WAN IP) .htaccess in root of domain1 RewriteEngine On RewriteCond %{REMOTE_ADDR} !^10\.2\.2\.1 RewriteCond %{HTTP_HOST} !^staging.domain1.com$ [NC] RewriteCond %{HTTP_HOST} !^staging2.domain1.com$ [NC] RewriteRule ^(.*)$ http://domain2.com/$1 [R=301] .htaccess in staging subdomain on domain1: RewriteEngine On RewriteCond %{REMOTE_ADDR} !^10\.2\.2\.1 RewriteCond %{HTTP_HOST} ^staging.revolver.coop$ [NC] RewriteRule ^(.*)$ http://domain2.com/$1 [R=301,L] The multiple .htaccess files and multiple rulesets require more processing overhead and longer iteration as the visitor is potentially redirected twice, however I find it to be a more granular method of control as I can selectively allow more than one IP address access to individual staging subdomain(s) without automatically granting them access to everything else. It also keeps the rulesets fairly simple and easy to read. (or re-interpret, because I'm always forgetting how I put rules together!) If anybody can suggest a more efficient way of merging all these rules and conditions into just one main ruleset in the root of domain1, please post! I'm always keen to learn, this post is more my attempt to preserve this information for those who are looking to redirect entire domains for all visitors except themselves (for design/testing purposes) and not just denying specific file access for maintenance mode (there are many good examples of simple mod_rewrite rules for 'maintenance mode' style operation easily findable via Google). You can also extend the IP address detection - firstly by using wildcards ^10\.2\.2\..*: the last octet's \..* denotes the usual "." and then "zero or more arbitrary characters", signified by the .* - so you can specify specific ranges of IPs in a subnet or entire subnets if you wish. You can also use square brackets: ^10\.2\.[1-255]\.[120-140]; ^10\.2\.[1-9]?[0-9]\.; ^10\.2\.1[0-1][0-9]\. etc. The third way, if you wish to specify multiple discrete IP addresses, is to bracket them in the style of ^(1.1.1.1|2.2.2.2|3.3.3.3)$, and you can of course use square brackets to substitute octets or single digits again. NB: if you're using individual RewriteCond lines to specify multiple IPs / ranges, make sure to put [OR] at the end of each one otherwise mod_rewrite will interpret as "if IP address matches 1.1.1.1 AND if IP address matches 2.2.2.2... which is of course impossible! However as far as I'm aware this isn't necessary if you're using the ! negator to specify "and is not...". Kudos also to SE: this older question also came in useful when I was verifying my own knowledge prior to my futzing around with code. This page was helpful, as were the various other links posted below (can't hyperlink them all due to spam protection... other regex checkers are available). The AddedBytes cheat sheet's useful to pin up on your wall. Other referenced URLs: internetofficer.com/seo-tool/regex-tester/ fantomaster.com/faarticles/rewritingurls.txt internetofficer.com/seo-tool/regex-tester/ addedbytes.com/cheat-sheets/mod_rewrite-cheat-sheet/

  Read the article

• Opera 11 téléchargé 6,7 millions de fois le premier jour, des chiffres dépassant ceux de la bêta d'Internet Explorer 9

  Opera 11 téléchargé 6.7 millions de fois le premier jour, des chiffres dépassant ceux de la bêta d'Internet Explorer 9 Mise à jour du 18.12.2010 par Katleen Petite information, mais assez impressionnante pour qu'elle soit relayée : en à peine 24 heures de disponibilité, Opera 11, la dernière mouture du navigateur d'Opera Software équipé de quelques nouveautés, a été plus que largement téléchargé. Le logiciel a en effet été téléchargé 6.7 millions de fois en une journée ! C'est un record ! La version différente, Opera 10, n'avait été téléchargée que 1.7 millions de fois lors de sa première semaine d'exploitation. Pourquoi de tels résultats ? En partie grâce à l'auto-updat...

  Read the article

• How to properly set up a network bridge using bridge-utils using wlan0 as the internet "source"?

  - by Miguel Azevedo

  Hey everyone this is my first post so go easy on me. I currently have a laptop with Ubuntu Studio 12.04 Beta 2 that is supplying a wireless internet connection to a windows 7 desktop computer that's connected directly to the laptop through Ethernet. I'm using the "shared to other computers" method in network manager but I believe it doesn't work with what I want to do. I would like to have the windows computer on the same subnet as every other computer in my house (192.168.1.x) so I can use LAN applications (MIDI over WiFi, Bonjour etc.) on the windows computer without having to run a massive cable to the router. I've been googling endlessly and tried multiple configurations in the /etc/network/interfaces file without success. All of them would report "cannot add wlan0 to bridge" Is there a specific way to make this work? What am I missing? Thank you

  Read the article

• How did programmers resolve their problems before the internet?

  - by 9a3eedi

  When programming, anytime I get stuck, perhaps with a compiler error that doesn't make sense, or from a GUI function that didn't do what I expected, I automatically google my problem, find someone else that faced the same thing, and read what's going on and why I'm getting the problem. Before the internet, how did people handle these situations? People used to read books and manuals more, I know. But books don't explain everything, like the odd compiler problem that you get sometimes, or nothing showing up on your screen despite you clearly writing correct OpenGL code. How did people cope when facing challenges? Did they simply "bash their head" on the wall till they figured it out? Is there something people used to do regularly on the side that gave them the ability to get themselves unstuck more easily? Were libraries/compilers much simpler back then? I've been asking this question because I sometimes feel guilty depending on Google so much when I'm pretty sure programmers before my time were more independent when it comes to facing these matters.

  Read the article

• Do I need a wifi card to have internet access?

  - by Sarah

  I am attempting to set up a wireless network on 11.04, freshly download today. The router is on and working. However, I do not have a wifi "card" (which I am assuming is a little USB-type thing that allows internet access, but correct me if I am wrong) and every time I try to type in the MAC address and everything, nothing works. I also get the "firmware missing" error when I scroll over the signal strength, which I have tried looking up but have been unsuccessful with completely understanding it. I guess my main question is do I need another little device to be able to use wifi on my ubuntu? I do have an ethernet cable but another person is using it and I do not want to be tied down to that cable. the problem is that none of the wireless networks show up, however they show up when I go into Windows mode on my laptop. I get an error message at the top saying "firmware missing" which I have tried looking up but still have no straight answer for.

  Read the article

• DoNotTrack activé par défaut dans Internet Explorer 10, des annonceurs mécontents menacent de ne pas respecter l'en-tête HTTP

  [IMG]http://blog.developpez.com/media/5341.png[/IMG] La prochaine version du navigateur de Microsoft, Internet Explorer 10, sera intégrée dans Windows 8. Elle proposera la fonctionnalité DoNotTrack (DNT) et elle sera activée par défaut ! Brendon Lynch, le responsable de la vie privée, relaye cette annonce, faite le 31 mai par Microsoft, via son blog : "Les utilisateurs pourront changer ce paramètre, mais par défaut le signal DNT sera envoyé aux sites web que les utilisateurs visitent". Une affirmation claire ! Pour ceux qui ne la connaissent pas, la fonction DoNotTrack rajo...

  Read the article

• Network setup not working. Can't connect to the Internet in Ubuntu

  - by Clint Eastwood

  I want to know how to set-up network in 12.04 using automatic settings (DHCP). I installed Ubuntu, but I can't seen to see the network connection. What can I do? My notebook has no wireless only cable. The cable will not fit in. How can I plug it in? Do I need a special Cable? There is no router can I fix this myself, or should I call a technician? Also can I use USB to connect to the network/Internet? please can you help Thank you jamel

  Read the article

• Installing internet explorer and windows media player in ubuntu?

  - by karthick87

  I need to install Internet Explorer and Windows Media Player to check an URL for testing purpose. Could someone post me the exact steps to acheive this task? Note: I have already tried installing IE in Ubuntu 10.10 and later versions (12.04) with Wine. It works fine. But I don't get success installing Windows Media Player. Hope someone will solve my problem. It will be great if someone gives me a neat solution for installing IE and WMP in Ubuntu (10.10 or later).

  Read the article

• La RC de Internet Explorer 9 disponible pour la clôture des TechDays 2011, téléchargez-là et faîtes nous part de vos avis

  La RC de IE9 est disponible Avec Do Not Track, le support de WebM et met encore plus l'accent sur la sécurité Microsoft vient d'annoncer l'arrivée de la Release Candidate de IE9. Une nouvelle qui clôt en beauté les TechDays 2011, son salon dédiée cette année au Cloud Computing. Avec cette nouvelle étape, Internet Explorer 9 intègre toutes ses fonctionnalités finales. Il ne reste plus à l'équipe du projet qu'à corriger les bogues et les dernières imperfections avant la sortie officielle. Cette RC bénéficie d'un très léger toilettage de l'UI avec des onglets carrés (et non plus aux angles arrondies) qui peuvent à présent être placés en dessous d...

  Read the article

• How to share my usb modem's internet connection in ubuntu12.04?

  - by Nandlal

  I am using ubuntu 12.04 on my notebook and my primary internet connection is reliance netconnect. I want to share it on my android smartphone, but have no idea about sharing usb modem on linux. I was able to share the same on wondows 7 using the software provided by the notebook manufacturer. Again it's my bad luck that the manufacturer(Samsung) does not provides any driver or software for notebook for linux os they only provide it for windows os, but still some of the features work same as on windows without any driver or software. Please help me.

  Read the article

• What is the preferred Internet media type of a RESTful POST request?

  - by rdasxy

  Is there a preferred/recommended Internet Media Type for RESTful POST requests? For example, if I want to add a new user, should I send the data as a URL encoded string like: name=Foo&otherData=Bar or does REST recommend I send the data as whatever format the response is going to be sent as (e.g. JSON/XML)? <user> <name>Foo</name> <other-data>Bar</other-data> </user>

  Read the article

• How do I use logback-access in combination with Tomcat 5.5?

  - by mcduke

  I've got several Web apps running on a Tomcat 5.5 server, and I'm working on improving/updating the overall logging system used throughout the system. I already had some success with logback-classic. However, when I try to use logback-access (i.e. access the lbAccessStatus servlet), I get this exception: exception javax.servlet.ServletException: Wrapper cannot find servlet class ch.qos.logback.access.ViewStatusMessagesServlet or a class it depends on org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:433) ... root cause java.lang.ClassNotFoundException: ch.qos.logback.access.ViewStatusMessagesServlet org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1386) ... I have everything set up according to the docs: common/lib: logback-classic-0.9.15.jar logback-core-0.9.15.jar server/lib: logback-access-0.9.15.jar Moving around the libraries doesn't seem to help. logback-classic seems to work fine, it's just logback-access that causes problems.

  Read the article

• How do you determine with CLLocationManager when a user denies access to location services?

  - by Brennan

  With CLLocationManager I can use the following code to determine if I can access location services on the device. This is the master setting for all apps and can be turned on and off. if (self.locationManager.locationServicesEnabled) { [self.locationManager startUpdatingLocation]; } But a user can deny access to an individual app and in order to not execute the code to use the location manager I need to know if the user approved access to location services for this specific app. I saw that at one point there was a property called locationServicesApproved which appears it would indicate if the user approved access to location services in this app. But it was removed in 2008. Source: http://trailsinthesand.com/apple-removes-notifications-from-iphone-sdk-beta-4/ It appears that there is no way to determine if the user approved access to location services but that seems to be a big hole in the SDK. Is this feature in the SDK elsewhere? What can I do to determine if the user has approved access to location services for the current app?

  Read the article

< Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >