Search Results

Search found 13909 results on 557 pages for 'old man'.

Page 346/557 | < Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >

  • 13.04 Temp Save, rt3290, Kernel downgrade

    - by user170534
    It's kind of a multiplying but I didn't wanted to open more than one topics. I'd have a fresh install of Ubuntu with tlp configured and using acpi_call to keep 7670M turned off. I was a short time arch user and with openbox and firefox it was about 60 to 70 degrees; wanted to turn to a stable release just for this reason. acpitz-virtual-0 Adapter: Virtual device temp1: +50.0°C radeon-pci-0100 Adapter: PCI adapter temp1: -128.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +56.0°C (high = +87.0°C, crit = +105.0°C) Core 0: +54.0°C (high = +87.0°C, crit = +105.0°C) Core 1: +55.0°C (high = +87.0°C, crit = +105.0°C) The temperature is not seriously high yet can be lower. Another issue is my wifi card, rt3290: The rt2800pci module is fine and all that but the download performance is pretty bad alongside of annoying signal range and the prop. driver gives a conf error about some specific rt2860 code and integrales in pci_dev file. If I blank off the error making variables, module loads but the driver is unused. Since the driver is old, I was thinking of downgrading the kernel of raring to 3.7 or may be 3.6. Should &-or can I?

    Read the article

  • Who wants to keep developing?

    - by wcm
    I'm a bit older than most of my peers, having come into programming in my mid 30's. The thing is, I love what I do. Most of my project managers and bosses are my age or younger. I'm really OK with that. I, however, have no desire to climb the company ladder. While I regularly take on the responsibility of making sure that projects get done and my peers often look to me for programming and architectural guidance, I just like writing code and want to keep doing it for as long as possible. Honestly, my only real goal is grow into being a crusty old tech lead until I retire. IF I retire. I would so much rather learn the latest and greatest new technology than PMP my resume. Are there others out there who feel like this because I often feel rather alone in my pathology? EDIT Something I didn't make clear is that I really like helping and mentoring other developers. It makes me feel good and useful and (to be brutaly honest) important.

    Read the article

  • New Workstation &ndash; Lenovo W530 Core i7 32GB 256GB SSD Win8Pro

    - by Brian Lanham
    So I pretty-much have my new machine up and running full-time. I am still going to have to hit my old workstation for some things but am more-or-less working on my new machine.  It’s really fast. And Bret was right, I’m not so far using all the RAM. 16 would have been enough but as @CodeMonkeyJava “go big or go home”. Windows 8 is…interesting.  So far I still seem to do most of my work in the “Desktop”.  However, I like the Store concept and I like the Metro UX.  Live tiles are also nice.  I really like how I can switch between Desktop and Metro easily.  Overall I think Microsoft has done a great job of combining the needed experience for touch and mouse. My overall Windows 8 rating is 5.9 because of the video card. Otherwise I’m hitting 7.8.  The system boots from cold in about 11 seconds and performs complete shutdown in 4.7 seconds.  It wakes from sleep in less than 1 second. VS 2012 starts and restarts almost instantly.  In fact, I find myself staring at the start page without realizing it.  Build time doesn’t seem to be significantly increased but it is faster. I seem to already be reinvigorated for work with this new machine. I’m looking forward to the performance.

    Read the article

  • How to dual boot Ubuntu 12.10 and Windows XP sp3 on Dell Dimension 8250 desktop using 2 hard drives

    - by user106055
    I'd like instructions to dual boot Ubuntu 12.10 and Windows XP (sp3) on my desktop Dell Dimension 8250 (this is old and has 1.5 GB RAM which is maximum). I will be using 2 hard drives. Windows XP is already on a 120 GB drive and and Ubuntu 12.10 will go on a separate 80 GB hard drive. Both drives are IDE using a 80 conductor cable where the 40 pin blue connector connects to the motherboard. The middle connector is gray and is "normally" used for slave (device 1) and the black connector at the very end of the cable is meant for the master drive (device 0) or a single drive if only one is used. First, I do not wish the XP drive to have its boot modified by Ubuntu in any way. It should remain untouched...virgin. Let me know where the XP drive and the Ubuntu drive should be connected based upon the cable I've mentioned above, as well as jumper settings for both during the whole process. I'm just guessing, but should I remove the XP drive and put the empty Ubuntu drive in its place and install Ubuntu? By the way, I already have made the DVD ISO disk. For your information, the BIOS for this machine is version A03. When I tap F12 to get to the boot menu, I have the following choices: Normal (this will take me to a black screen with white type giving me the choice to boot to XP or to my external USB backup recovery drive) Diskette Drive Hard-Disk Drive c: IDE CD-ROM Drive (Note that if the CD Drive is empty, it will then go to the DVD drive) System Setup IDE Drive Diagnostics Boot to Utility Partition (This is Dell's various testing utilities) Thank you in advance for your help. Guy

    Read the article

  • Has anyone used game salad before and how does it compare with cocos2d in terms of 2d game development

    - by jih
    First a short intro. I am new to the game development space and want to make some 2d games for iOS. I first come across cocos2d and kobold but then wanted something more graphical for rapid prototyping. I then found Game Maker which doesn't support iOS but is fairly easy to learn and then found Game Salad which supports iOS as well as other platforms. I know this question has been ask before but I want to know in terms of the types of games I want to develop what an learning investment path would be best. The types of games genre I am interest are: Side scrollers Simple games like diamond dash or ninja fruits, shanghai, etc Old fashioned zelda or dragonquest type (nintendo fan here:-) 2d adventure RPG games (real time or turn based) Mystery turn based games like carmen sandiego, wizardry, myst etc. So now the question becomes Which game development environment should I invest my time in learning. Game Salad or cocos2d? It would seem game salad would be great for quickies being graphical but in terms of 2d platform games etc would there be speed/performance/feature penalties? Are there certain 2d games genre of the 4 above that Game salad is better at while certain type cocos2d would be better at? Anyone with experience of both can share some pointers? Thanks. inexperienced jih

    Read the article

  • Oneric Aspire One. After latest 11.10 update to Linux 3.0.0-9 boot hangs at staement "Starting Bluetooth"

    - by hevh
    I have today updated the version of Linux on Ubuntu on my Acer Aspire One. The boot hangs on the statement "Starting Bluetooth". Help please!! EDIT1: I get the grub menu when I start the netbook and it doesn´t matter which version of linux I choose the resulkt is the same. It gets as far as the Ubuntu spash screen then drops into command line mode then hangs on the line "Starting Bluetooth". I can log in and have tried various forms of the apt-get command to fix the system but with no result. I do not need bluetooth at the moment and so could remove the application if I knew how. (have tried apt-get remove bluez). When I use the command sudo apt-get -f install I get an error message saying "There's not enough space in /var/lib/mysql/" folowed by several other error messages. I have spent some time looking for similar problems and solutions using google but so far got to nothing to help. Thanks EDIT2: I have since discovered when running Knoppix or slitaz from a usb stick that the file managers report the hard disc as having no space. However GPARTED reports it as having 3.69gb. I do recall making space on the hard drive by deleting some old files and emptying trash whilst the update was running; perhaps its related. Any suggestions for how I can recover the apparently lost space from hard disc without losing the data. I have backups of the actual data but do not wnat to lose the applcations configuration. Thanks Kev

    Read the article

  • How should I implement Transaction database EJB 3.0

    - by JamesBoyZ
    In the CustomerTransactions entity, I have the following field to record what the customer bought: @ManyToMany private List<Item> listOfItemsBought; When I think more about this field, there's a chance it may not work because merchants are allowed to change item's information (e.g. price, discount, etc...). Hence, this field will not be able to record what the customer actually bought when the transaction occurred. At the moment, I can only think of 2 ways to make it work. I will record the transaction details into a String field. I feel that this way would be messy if I need to extract some information about the transaction later on. Whenever the merchant changes an item's information, I will not update directly to that item's fields. Instead, I will create another new item with all the new information and keep the old item untouched. I feel that this way is better because I can easily extract information about the transaction later on. However, the bad side is that my Item table may contain a lot of rows. I'd be very grateful if someone could give me an advice on how I should tackle this problem. UPDATE: I'd like to add more information about the current design. public class Customer implements Serializable { @OneToMany private List<CustomerTransactions> listOfTransactions; } public class CustomerTransactions implements Serializable { @ManyToMany private List<Item> listOfItemsBought; } public class Merchant implements Serializable { @OneToMany private List<Item> listOfSellingItems; }

    Read the article

  • SunSpace - a sentimental moment

    - by me
    I just came back from California where I had a little sentimental moment.With the great help from some former Sun colleagues we move the old SunSpace gear into a new data center in Santa Clara.We will re-purpose the hardware as a new development infrastructure to build integrated demos around Oracle WebCenter products, Business Applications and Social Services. now - I could not resist to restart the SunSpace applications and see if it still works. And hey - even though we had to re-IP the entire  stack (sun.com domain is gone) and with some little hacking (thanks to Apache reverse proxy) -  we got it back! Hey Max - now I just need to change your SSO hack to get login working again Hmm - I won't - but it is really nice to see it working again .. and it's time to switch it off and to work  on the next cool things .. Do you know Oracle WebCenter Sites (formely Fatwire)? Its Oracle's Web Experience Management Solution - a pretty cool technology and a very slick User Interface. I specially like the drag&drop functionality which allows non technical users to easily publish content.  Why do I mention it here ?  Because we will use the SunSpace gear to build cool  Oracle WebCenter Sites demos and proof of concepts integration  into Business Applications and Social Services  This is a sneak preview what we are working on. Stay tuned.....

    Read the article

  • Website only displays correctly in IE using compatibility mode?

    - by user21318
    As the resident "IT Whiz" at work (ie: I know how to use a computer) I've been asked to develop a website for our small business. I've altered a wordpress theme for the time being and the company is very happy with the results. The only problem I am having with it at the moment is that for some reason the website does not display correctly and Internet Explorer unless I run it in Compatibility Mode. The main problem that I have is that my menu "slider" (it rotates pictures with links to articles etc) does not display at all, neither does the top menu they are just blink text based links. Even with Compatibility Mode enabled the slider and menus come back but the page is not centered unlike on both Firefox and Chrome. My googling has suggested the most common cause of this is old code but I'm not sure where to be looking. Is it likely in the css file or the actual php? Also any ideas on how to trouble shoot the cause of this? As in is there some dev tools or debugger I can use that would highlight "broken" code for me?

    Read the article

  • some questions related to ubuntu app showdown

    - by user49557
    Where to ask questions related to ubuntu app developer showdown? http://askubuntu.com/questions/151148/how-do-i-participate-in-the-ubuntu-app-showdown Can I use old code by myself to build on for my entry in the Ubuntu App Showdown contest? after seeing these threads and posting a question at askubuntu where to ask questions related to ubuntu app showdown i got we can ask these questions here my questions: can i submit more than one app in the contest and tell me more about this suppose i submit 5 apps out of which one is won then will it be valid if 2 or 3 are won i think the number of t-shirts does not depends upon number of apps one per person for development i have to use quickly but can i use third party libraries for GUI or other work i think i will need it for eg. pyside the first and second winner will get laptop + mobile too right or not the mobile how the prizes will be delivered will they charge(i don't think so) i would like to use multiple libraries i can use htme right ? more details are always welcomes i have mostly all ubuntu app showdown related pages but if you find something in background than tell me note:i am not saying that i am going to win just questions don't take it in that way

    Read the article

  • Mouse selects everything on its own

    - by meneer
    I have a strange problem that my mouse keeps selecting everything I point to. For example, if I open Rhythmbox, then at the top of the screen there is a text which says which song is playing. If I move my mouse over this text, then it will select this text; but I am not clicking. This behaviour does not happen in all programs. For example in Firefox I have no problem at all. Maybe it is Gtk related? Nautilus also behaves strangely; I cannot open files by clicking on them, I have to select and make a box around the file and then press enter to open it. If I click, then nothing happens. Similar problems also happen with other Gtk software. I think the problem might be related to touchscreen issues (I have a touchscreen). I run Gnome 3 on Ubuntu 12.04. I have a HP touchsmart 610 desktop computer. Any help is greatly appreciated. UPDATE: I just did a fresh reinstall, and I am 90% certain that it is related to the touchscreen drivers. Here is what happens when I reinstall. At first boot, so exactly after install, everything works fine, except the touchscreen: The touchscreen does not respond. I update ubuntu, because I installed from an old CD (CD with ub. 12.04). Then on next reboot I have touchscreen working , but the working touchscreen comes together with the mouse selecting everything on its own. SECOND QUESTION: Would anybody know how I could figure out what those touchscreen drivers are (so that I can disable them) ?

    Read the article

  • How to handle notifications to several partial views of the same model?

    - by Seki
    I am working on refactoring an old simulation of a Turing machine. The application uses a class that contains the state and the logic of program execution, and several panels to display the tape representation and show the state, messages, and the GUI controls (start, stop, program listing, ...). I would like to refactor it using the MVC architecture that was not used originaly: the Frame is the only way to get access to the different panels and there is also a strong coupling between the "engine" class and the GUI updates in the way of frame.displayPanel.state.setText("halted"); or frame.outputPanel.messages.append("some thing"); It looks to me that I should put the state related code into an observable model class and make the different panels observers. My problem is that the java Observable class only provides a global notification to the Observers, while I would prefer not to refresh every Observers everytime, but only when the part that specificaly observe has changed. I am thinking of implementing myself several vectors of listeners (for the state / position, for the output messages, ...) but I feel like reinventing the wheel. I though also about adding some flags that the observers could check like isNewMessageAvailable(), hasTapeMoved(), etc but it sounds also approximative design. BTW, is it ok to keep the fetch / execute loop into the model or should I move it in another place? We can think in a theorical ideal way as I am completely revamping this small application.

    Read the article

  • Configuring network to set wlan0 as primary

    - by Sheed
    I recently had to rebuild my pc and decided to go for ubuntu 14.04. I think the mistake I made was I started from a 12.04 install disk instead of the 12.10 disk I'd used previously and when given the option set my primary connection as ethernet (because the wireless option didn't work). After upgrading to 14.04 etc, I managed to get the wireless working, or more using steps like ifconfig -a and the likes I managed to prove that the wireless card etc. is all installed and working. However every time I boot without a hard wired connection plugged in I get the message "waiting for network configuration". I can then once it's booted without a network get my wirless working using sudo ifconfig wlan0 up iwlist wlan0 scan This seems to kick the wireless module into life and it appears in the GUI and I can then select a network, however all the options like edit network and disconnect etc are all greyed out. What I would like of course is if the WLAN0 was just set as my primary default network so I've been looking for a solution to this and it would seem that I need to adjust the old /etc/network/interfaces file but when I try to do so using the sudo vi /etc/network/interfaces command I, well I simply have no idea what I'm doing. Other than that typing :q! gets me out of there before I do to much damage! As far as I can tell (by navigating to the file in the GUI) the output of my /etc/network/interfaces is as follows: (obviously not including the " in each line that's just to break the heading rule of the #) "# This file describes the network interfaces available on your system "# and how to activate them. For more information, see interfaces(5). "# The loopback network interface auto lo iface lo inet loopback "# The primary network interface auto eth0 iface eth0 inet dhcp If this is the case then this clearly doesn't contain what it should do but I don't how to fix it. Nor do I even know if I'm on the right track. Any help would be appreciated thanks :)

    Read the article

  • Extended display - nightmare

    - by user206343
    I have been struggling for quite a while, and I hope one of you can shed some lights on my issue. I am using Xubuntu 13.10 (Ubuntu 12.04LTS behaves the same way, higher version wouldn't install, LinuxMint didn't install, Fedora didn't install). I am trying to set extend display for two dell monitors 1900x1200. It works great when in mirror mode, but I just cannot extend the display. Either one monitor goes to sleep and the other is unresponsive, or both work but are unusable. This is a link to the picture of my monitors in mirror mode This is link showing what happens after I try to extend the desktop I get the same results if I use aRandr or the built in configuration utility. I have an ATI Radeon X300 card. I cannot use proprietary Catalyst drivers (I would have to use the legacy ones, which would force me into using much older version of the OS). Extension is possible with Windows. I am hoping someone can come up with tweaks that would allow me to run an extended desktop. I truly love Xubuntu (and Ubuntu, unfortunately, Unity is a bit too heavy for my old PC, and I have to run in 2D mode, so 12.04 is as high as I can go). I have tried everything I could find online, but nothing worked thus far. I believe some configuration or something I am missing might work. Please, if you have any idea, do not hesitate. Thanks guys.

    Read the article

  • Significant amount of the time, I can't think of a reason to have an object instead of a static class. Do objects have more benefits than I think?

    - by Prog
    I understand the concept of an object, and as a Java programmer I feel the OO paradigm comes rather naturally to me in practice. However recently I found myself thinking: Wait a second, what are actually the practical benefits of using an object over using a static class (with proper encapsulation and OO practices)? I could think of two benefits of using an object (both significant and powerful): Polymorphism: allows you to swap functionality dynamically and flexibly during runtime. Also allows to add new functionality 'parts' and alternatives to the system easily. For example if there's a Car class designed to work with Engine objects, and you want to add a new Engine to the system that the Car can use, you can create a new Engine subclass and simply pass an object of this class into the Car object, without having to change anything about Car. And you can decide to do so during runtime. Being able to 'pass functionality around': you can pass an object around the system dynamically. But are there any more advantages to objects over static classes? Often when I add new 'parts' to a system, I do so by creating a new class and instantiating objects from it. But recently when I stopped and thought about it, I realized that a static class would do just the same as an object, in a lot of the places where I normally use an object. For example, I'm working on adding a save/load-file mechanism to my app. With an object, the calling line of code will look like this: Thing thing = fileLoader.load(file); With a static class, it would look like this: Thing thing = FileLoader.load(file); What's the difference? Fairly often I just can't think of a reason to instantiate an object when a plain-old static-class would act just the same. But in OO systems, static classes are fairly rare. So I must be missing something. Are there any more advantages to objects other from the two that I listed? Please explain.

    Read the article

  • After installing Ubuntu my computer boots into GRUB rescue mode after displaying 'no such partition' error message.

    - by VictorVictor5
    I wanted Ubuntu on my Gateway Solo Laptop. It had Win98 on the C:\ and WinXP on the D:\. Before the install, I could not boot from CD, but I could boot from floppy. I installed Ubuntu to run alongside Windows XP as that was one of the options. It didn't detect Win98, but I swear it's on there. Install seemed fine and then it asked me to reboot. When I rebooted, I got the message error: no such partition and the grub rescue> command prompt. I've looked around, but some commands, like sudo, don't work. One command I did get to work was set root=(hd0,0) if that helps. I'm a noob, and it was a pain installing Win98 and XP since this system is so old. I don't want to wipe my drive and start all over! Additional details copied from comments Addendum, I restored my master boot record via my Win98 boot floppy and typing in frisk /mbr. But, I'd still like to get ubuntu - any help? If I restored my master boot record - did I delete Ubuntu?

    Read the article

  • Alternatives to PHP [closed]

    - by kaz
    We are starting a project, which goal is to create new frontend interface to our product. Old version was created in PHP, very poorly written. We are choosing the language and frameworks that we want to use in new version. Requirements: New interface will be communicating with API. Application will not have it's own database. We don't have a big team, 3 max programmers for entire project. The main programmers are PHP veterans and knows some other technologies (Rails, C, C++, some Java) but not in professional level. But overall they are good and experienced programmers. So: We want to find a good alternative to PHP. I like Rails very much, but whole ActiveRecord model will be useless, when using application API. Java needs a lot of configuration and someone who is expert in Java to properly run this project. Also, in Java there are a lot of big and complicated enterprise frameworks - not very good for 2-3 programmers team. Python - I don't know Python and don't know good and experienced programmers who knows PY - but it's not so complicated and big as Java and maybe in long period it's good alternative for PHP. What are your thoughts?

    Read the article

  • When you’re on a high, start something big

    - by BuckWoody
    Most days are pretty average – we have some highs, some lows, and just regular old work to do. But some days the sun is shining, your co-workers are especially nice, and everything just falls into place. You really *enjoy* what you do. Don’t let that moment pass. All of us have “big” projects that we need to tackle. Things that are going to take a long time, and a lot of money. Those kinds of data projects take a LOT of planning, and many times we put that off just to get to the day’s work. I’ve found that the “high” moments are the perfect time to take on these big projects. I’m more focused, and more importantly, more positive. And as the quote goes, “whether you think you can or you think you can’t, you’re probably right.” You’ll find a way to make it happen if you’re in a positive mood. Now – having those “great days” is actually something you can influence, but I’ll save that topic for a future post. I have a project to work on. :) Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Are you satisfied with your programming? [closed]

    - by Richart Bremer
    If you are a programmer, are you satisfied with it? I really love to code. I code all kinds of things. I used to play computer games but they are not that interesting compared to developing a new search algorithm or similar. But sometimes I look into the future and see myself being 80 years old, sitting in front of a computer and everything I will have written will be rewritten because the programming languages do not exist anymore. I look back on my life and think "that's it?". Everything I wrote in the past is virtual and ultimately gone. I tried other things but coding is the only thing that does it for me. And at the same time I think I am wasting my life. What about you? Disclaimer: I presume this is the best forum for this question. If you don't agree suggest better place to migrate the question. If you can't, don't close it. Thank you.

    Read the article

  • Weird internet connection issue on Ubuntu 14.04

    - by user287876
    I have an old Gateway PC with Windows 7 installed alongside the original (XP, I think?). A while ago my friend walked me through and helped me install Ubuntu 14.04 alongside the others because my Win7 was having issues with the display driver (it would unexpectedly crash while trying to watch videos on YouTube or other places). And I can't update it because the original computer settings are for XP or something, not Win7. :( We recently switched from AT&T U-Verse to Comcast. I would have stayed with Ethernet, but somehow the adapter I have wouldn't connect to Comcast's thing during their installation. So I was given a wireless USB adapter. It worked fine, up until the last few days. It's not a problem on Win7 (using it right now). Connection's strong, things load. On Ubuntu though, it SAYS it connects even before I login to my account, but when I login and bring up Firefox, it will load the homepage, and maybe one or two other pages I venture to before suddenly just... endlessly trying to load the page. I would normally go in and manually select 'disconnect' from the connections options menu to refresh/restart it like I've done a few times already. But lately, it won't respond, and then a little while later an error message comes up saying the request timed out/failed. Restarting my computer doesn't help it. The other weird thing is that I've noticed the signal (when it's actually working properly before the last few days) is comparitively weaker than when I'm on Win7. But my location doesn't change. It's the same computer, same connection.

    Read the article

  • ASP.Net MVC 3: multiple versions of the site without changing of URL, is it possible?

    - by Seacat
    Our website is written in ASP.NET MVC 3 and we want to change a feature in the core functionality of the site. The problem is not every client can be moved to this new version/format (because of some technical inner restrictions) so it means that we need to keep 2 versions of the same functionality (backend and frontend) simultaneously. We don't want our clients to worry about URLs, so the ideal solution would be keep the same URL but redirect clients to the different versions. The information about clients is stored in database. So the moment when user (client) logs in we know which version of site we should show. I'm thinking about routing and areas but I'm not sure if it's possible for example to have 2 areas with the different versions of the same application. Or is it possible to load the assemblies on the fly? After user is logged in we can decide if (s)he should be redirected to the new or old version. As far as all the clients have been moved to the new version we don't need this system more. How can I do this in ASP.NET MVC?

    Read the article

  • How would you manage development between many Staging branches?

    - by Trip
    We have a Staging Branch. then we came out with a Beta branch for users to move whenever they wanted to from old Production branch to the new features. Our plan seemed simple, we test on Staging, when items get QA'd, they get cherry-picked and deploy to Beta. Here's the problem! A bug will discreetly make its way on to Beta, and since Beta is a production environment, it needs fixes fast and accurate. But not all the QA's got done. Enter Git hell.. So I find a problem on Beta. No sweat, its already been fixed on Staging, but when I go to cherry-pick the item over, Beta barely has any of the other pre-requisites of code to implement this small change. Now Beta has a little here and a little there, and I can't imagine it as a code base being as stable as Staging. What's more, is I'm dealing with some insane Git conflicts, and having to monkey patch a bunch of things to make up for what Beta hasn't caught up with Staging. Can someone polite or non-polite terms, tell me what we're doing wrong here as far as assembling this project? Any awesome recommendations or workarounds or alternatives to the system we came up with?

    Read the article

  • Redesigning my website has destroyed my SEO

    - by user20721
    Unfortunately i read an article on how to avoid destroying your websites SEO from a redesign article AFTER its was too late! Here is the article (http://www.searchenginejournal.com/how-to-avoid-seo-disaster-during-a-website-redesign/42824/) On 20 November 12 completely redesigned our www.retromodern.com.au . We get ALL our customers from our website as we do not have a shop. Since that dreaded day a month ago the phone pretty much stopped, basically no emails, Google rankings down and Google analytics have halved by 50%. Yesterday i did some research into as as i had no idea that a re-design of a website could have such a damaging effect - yes i am a novice and use a WYSIWYG type web builder. There are lots of info on how to AVOID this from happening BUT what do i do as i have already made the mistake? Yesterday i reloaded my OLD site with my new pages in the background hoping this would be a start. I really have no idea of how to get out of this mess. Please please help. Thanks in Advance. Monique

    Read the article

  • How to learn to program [on hold]

    - by user94914
    I went to a community college and got a degree in computer science, but I found out I only learn very little about programming. As a result I landed byself a office assistant work (for a year now), I want to study on my own and apply for some internship / very entry level development job. I am wondering how should a person learn to program now? I feel that I might not doing it correctly, I understand everyone has a different approach, but I am really clueless on what to do, as it seems I am 5-10 years away. 1) Read the old college programming textbook cover to cover, learn every single concepts, do all the practice problems and master them (1-2 times until error free). Currently reading this java book 2) Work on any project, keep on googling and reading tutorials (including the books on that specific language). I have been doing 1, but the progress is really slow, about 2-5 pages / hour, over a 1000+ page book, I felt really discouraged. I have a few of them to go through (data struction, analyis algorthim, computer theory, operating system.) I wonder is this the right method to do? I know it is going to take time, but I am hoping to get some advice from current programmers.

    Read the article

  • Transforms in Box2D

    - by user1264811
    I'm attempting to implement a camera in my game. I had it working for regular objects, but I began using Box2D and obviously things changed a bit. I have a Body object that I want to draw at the center of the screen. Basically what I'm doing is subtracting the viewportX and viewportY to the Body. I use this code that currently is not working as it should: public void paint(Graphics2D g, int viewportX, int viewportY) { Transform xf = new Transform(); // m_body is the Body object xf.set(m_body.getTransform()); // Here what I attemp to do is take the transform and alter it // by the viewportX and Y, which is something like **-240, -150**. // Why is it negative? Because an object has coordinates 500, 300 would be displayed // at 160, 150 when the subtraction is done. // With the DrawUtils.toScale(), it's just how I convert the units from JBox2D units // to my units. Vec2 v = Transform.mulTrans(xf, new Vec2(DrawUtils.toScale(-viewportX), DrawUtils.toScale(-viewportY))); // Set the new transform to the new vector. Keep the old angle. xf.set(v, xf.q.getAngle()); g.setColor(Color.white); // I know for a fact that the following method works 100%. It correctly displays // my object, just that it doesn't follow it. for (Fixture f = m_body.getFixtureList(); f != null; f = f.getNext()) DrawUtils.drawShape(f, xf); } Hopefully I didn't over comment this and you understand my problem. I don't want to alter the actual physics position of the object, I just want to display it in the center.

    Read the article

< Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >