Search Results

Search found 14958 results on 599 pages for 'people'.

Page 346/599 | < Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >

  • Cities from Space: A Tour of Urban Planning Patterns

    - by Jason Fitzpatrick
    While many cities developed haphazardly and organically with little structured planning, other cities were developed following strict organization–organization that reveals itself beautifully when seen from space. Wired magazine shares a roundup of ten well-planned cities viewed with a satellite’s eye. Among the roundup our favorite is the oldest, seen in the photo above: This nine-pointed fortress is perhaps the best example of a planned city from the Renaissance. Palmanova was built in 1593 and is located in the northeastern corner of Italy near the border with Slovenia. It was intended to be home to a completely self-reliant utopian community that could also defend itself against the Ottomans. It had three guarded entrances, ramparts between each of the star points and eventually a moat. Sadly, nobody was willing to move there. Eventually it was used as free housing for pardoned criminals. Today it is a national monument, a tourist destination and home to around 5,000 people. Hit up the link below to check out the other nine well-planned entries in the roundup. How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices

    Read the article

  • Regular Expression to replace part of URL in XML file

    - by Richie086
    I need a regular expression in Notepad++ to search/replace a string. My document (xml) has serveral thousand lines that look similar to this: <Url Source="Output/username/project/Content/Volume1VolumeName/TopicFileName.htm" /> I need to replace everything starting from Volume1 to .htm" / to replaced with X's or some other character to mask the actual file names in this file. So the resulting string would look like this after the search/replace was performed: <Url Source="Output/username/project/Content/Volume1XxxxxxXxxx/XxxxxXxxxXxxx.htm" /> I am working with confidential information that I cannot release to people outside of my company, but i need to send an example log file to a 3rd party for troubleshooting purposes. FYI the X's do not need to follow the upper/lower case after the replacement, i was just using different case X's for the hell of it :)

    Read the article

  • Apache on Windows random long wait times

    - by Jaxbot
    I have a development machine with Apache installed as a service on Windows. The installation is fresh out of the box, with no changes to configuration aside from adding the PHP module. From day one, I've had a problem that looks like this: Essentially, Apache is freezing for about 11 seconds before replying on random requests. This appears to happen more frequently when the host hasn't been connected to in a while, but this is not always the case. I've eliminated MySQL, PHP, and the specific application; this long wait problem will occur even when loading a static file such as favicon.ico. Thus, the only factor remaining is Apache, which is freezing for consistently around 10-11 seconds before replying. The problem is not the DNS problem that many people point to; as you can see, the DNS lookup is instant, and the problem occurs both on localhost and 127.0.0.1. Thanks for the time.

    Read the article

  • Best Terminology for a particular php-based site architecture? [closed]

    - by hen3ry
    For a site... o whose overall look-and-feel is generated by one php page ("index.php"). o in which "index.php" provides for all pages served the following required components: The DOCTYPE, opening html tag, the head section, the opening body tag, the end-body tag, and end-html tag. o which uses computed hierarchical navigation menus within "index.php" to offer visitors access to the site content. o in which all content is stored in individual files that contain "headerless html". (The DOCTYPE, etc. etc. being being provided by "index.php" as described above.) Q1: what term best describes this architecture? I'm seeking a concise descriptor that is useful in conversation and definitive as a search term, in whole-web searches, and searching here on Pro Webmasters. Q2: what term best describes the individual content files? Same general goals for the descriptor as above. As you see above, I couldn't avoid using the term "headerless html", my best choice. But this term does not seem to be in general use. I've found some people use this term to describe such as my content files, but others use it quite differently.

    Read the article

  • Copy Ubuntu distro with all settings from one computer to a different one

    - by theFisher86
    I'd like to copy my exact setup from my computer at work to my computer at home. I'm trying to figure out how to go about doing that. So far I've figured this much out. On the source computer run dpkg --get-selections > installed-software and backup the installed-software file Backup /etc/apt/sources.list Backup /usr/share/applications/ to save all my custom Quicklists Backup /etc/fstab to save all my network mounts Backup /usr/share/themes/ to save the customization I've done to my themes I'm also going to backup my entire HOME directory. Once I get to the destination computer I'm going to first do just a fresh install of 11.10 Then I'll copy over my HOME directory, /etc/apt/sources.list, /usr/share/appications, /etc/fstab and /usr/share/themes/ Then I'm going to run dpkg --set-selections < installed-software Followed by dselect That should install all of my apps for me. I'm wondering if there's a way/need to backup dconf and gconf settings from the source computer? I guess that's my ultimate question. I'd also like any notes on anything else that might need backed up as well before I undertake this project. I hope this post is legit, I figured other people would be interested in knowing this process and I don't see any other questions that seem to really document this on here. I'd also like to further this project and have each computer routinely backup all the necessary files so that both computer are basically identical at all times. That's stage 2 though...

    Read the article

  • Facebook shared links not opening (Redirecting correctly) [on hold]

    - by Hammad
    I have been in a problem and after hours of searching find nothing useful to counter it. I have a website, and that website has RSS feed attached to facebook page. As I post the content to website it also appears on facebook page. But I have people complaining on my page that my posts don't open when they click the link to read the details. Since I am a Chrome user and didn't notice this happening for months. But as I checked it through firefox and Internet Explorer, I found the links shared actually don't open with these browswers. They only work in Chrome, means they are properly redirected in chrome browser and not in firefox and IE. Whenever I click on links of posts on my page through IE or firefox the url does not simply redirect to my website and I get to see nothing as if I am not connecting to Internet. When examining URL I see this: http://www.facebook.com/l.php?u=http%3A%2F%2Fbit.ly%2F112NVO9&h=EAQHDgTUv&s=1 Which shows that facebook is not redirecting the links properly. Moreover I also use link shortening service bit.ly to shorten my shared links. I have checked same problem exists even if I don't shorten my links. And I checked I am not alone, even the tech giant website mashable.com links also don't open in IE and FF from facebook, they only open in Chrome. From mobile phone the links don't open (redirected properly) even in chrome. Can anyone tell me what is the issue? Nothing much is written about it on Internet as no once has faced this problem. P.S: I have checked from different systems, the problem persists.

    Read the article

  • The Start of a Blog

    - by dbradley
    So, here's my new blog up and running, who am I and what am I planning to write here?First off - here's a little about me:I'm a recent graduate from university (coming up to a year ago since I finished) studying Software Engineering on a four year course where the third year was an industrial placement. During the industrial placement I went to work for a company called Adfero in a "Technical Consultant" role as well as a junior "Information Systems Developer". Once I completed my placement I went back to complete my final year but also continued in my developer role 2/3 days a week with the company.Working part time while at uni always seems like a great idea until you get half way through the year. For me the problem was not so much having a lack of time, but rather a lack of interest in the course content having got a chance at working on real projects in a live environment. Most people who have been graduated a little while also find this - when looking back at uni work, it seem to be much more trivial from a problem solving point of view which I found to be true and I found key to uni work to actually be your ability to prove though how you talk about something that you comprehensively understand the basics.After completing uni I then returned full time to Adfero purely in the developer role which is where I've now been for almost a year and have now also taken on the title of "Information Systems Architect" where I'm working on some of the more high level design problems within the products.What I'm wanting to share on this blog is some of the interesting things I've learnt myself over the last year, the things they don't teach you in uni and pretty much anything else I find interesting! My personal favorite areas are text indexing, search and particularly good software engineering design - good design combined with good code makes the first step towards a well-written, maintainable piece of software.Hopefully I'll also be able to share a few of the products I've worked on, the mistake I've made and the software problems I've inherited from previous developers and had to heavily re-factor.

    Read the article

  • Mouse wheel does not work in Excel 2007

    - by Chris Noe
    I am running Office 2007 on Windows XP-SP3. My mouse wheel works fine in other applications, meaning that it scrolls information up and down when the mouse is positioned over a given panel. It's even working fine in the other Office 2007 apps, so this is not a hardware or driver problem. It doesn't help to click on a cell to give the worksheet focus. I've tried various Advanced options that people recommend, to no avail: Allow editing directly in cell Zoom on roll with IntelliMouse What the heck, has Microsoft disabled this most useful functionality?

    Read the article

  • How to make a good portfolio for IT student (who loves programming) like me?

    - by Viet
    I am currently a college student, and going to apply for an university in probably next month. Unlike art student who easily put on their works such as models, designs and so on on their portfolio; I am hitting a dead corner trying to find a "creative" way to showcase my work as a programmer. It would be normal if programmer shows his good project with source code and everything else. Well, it should be no problem with actual "good" projects, but all of my projects are crappy (can't help it because I am still student, and don't have much work experience) and I don't even know it's worth to show. Nonetheless, I have learned a lot in only 1 year since I started programming. I am now familiar with Java, PHP, Actionscript3, C#, Objective-C and on my way to learn Ruby. I plan to build a Flash portfolio using Actionscript with Ruby as backend to show what I have learnt. The problem is idea. How to show people that I learned a lot of useful thing? Otherwise I hit the dead end and LOL just show what I have on Github (but i certainly never want that...)

    Read the article

  • Video screen recording + add text (subtitle), export as .flv. What programs?

    - by RasmusWriedtLarsen
    I have to record a video to showcase a tool I've made. It's going to include my talking, but I also want some overlay text (subtitles) for people who doesn't have sound. I'm looking for a program that will let me add a text overlay (as subtitle) for my video, and if possible, export it as .flv . I've tried this so far: Used CamStudio for recording, using their lossless format. Converted the .avi file to a .flv using Any Video Converter (free version) I've been having some trouble with the output of CamStudio, some programs can't play the file right, it skips forward and backward. (VLC, Adobe Media Encoder CS4) So I'm looking for a program that accepts videos from CamStudio*, can add text to my video, and hopefully export as flv. *(If that's not possible I'm open for other recording programs). I'd like to ONLY use free programs, and I'm on Windows XP. Looking forward to your help :)

    Read the article

  • recommendations for a lightweight linux distribution for a test server

    - by Jack
    I'm planning on setting up a test server to experiment with some application servers (tomcat/jboss/...) and with some portals. Now the machine I've set aside for this is lightweight CPU/GPU wise(Atom D510, 4 gigabyte ram, 500 GiB hdd, onboard GPU). But it should suffice for most things, I'm more interested in the stability of JBoss/Tomcat for my purposes than the stability. However I'm having a bit of trouble picking an appropriate distribution size/performance/setup time wise/security wise since it seems I can't sneeze without another distribution popping up. I've been thinking about going for Fedora since I've read that that distribution has been optimized for Atom, but I'm not really familiar with it. My experience with Linux has mostly been limited to Ubuntu and some tinkering with puppylinux. I'm not afraid to get my hands dirty using the command line. I'm not planning on starting a discussion per se, mostly the pros/cons that people have encountered with some distributions

    Read the article

  • automatic reply rule within Outlook

    - by jherlitz
    My plan is to add a automatic reply to all incoming emails for a exchange mailbox. I created a rule that would check all incoming and created the template reply. Created it so it would match a server rule so outlook would not have to be open. If I send an email from my work account on the same exchange server, it works and sends the reply I created. With outlook open or closed. However, when I send email from outside the company, (my personal email), it does not get a reply. What the heck is going on there? I think the issue is within the selection of who the email is too. I have tried "only to me" "where my name is in TO or CC" as well as "sent to people or distribution list". So any ideas of why this isn't working. I thought this question was a super user question as appose to server fault. Thank you,

    Read the article

  • Fatal error: Out of memory (allocated ...) (tried to allocate ... bytes) not due to memory_limit setting

    - by Lorenz Meyer
    Since a few days, I get the following error on my server: Fatal error: Out of memory (allocated 262144) (tried to allocate 393216 bytes) Usually this error is due to a memory consumption that is exceeding the configured memory_limit, but in my case there is no relation. The memory_limit is set to 128MB, and in this case, we not even reach 1MB. Also the server does not have a big load, in fact it is an intranet server, and there are just a few people conected to it. System: Windows Server 2003, 1Go RAM, only 600 MB used. Apache 2.2.4 PHP 5.2.3 This error is appearing randomly. The memory limit reached also is randomly between a few kB to a few MB. Sometimes restarting Apache is required to get rid of the error, sometimes it disapears itself. Restarting Apache or the entire server helps temporarily. Where could this problem come from ? How could I narrow down the error source ?

    Read the article

  • Getting rank for keywords that I don't want to appear on my website [duplicate]

    - by Rober
    This question already has an answer here: Which keyword should I use. colors or colours or a combination of both? 2 answers One of my products has two names. One of them is what I consider correct and thus it is what I want to appear on my website. The other name is incorrect for me, so I would like to avoid it. But I know that many people will search my product using the "bad" name. How could I get the "bad" name indexed for my site on search engines even if nobody can read it there? Of course, I want to do it "legally" so that no engine will ban my site considering it as cloaking, black hat SEO, etc... EDIT: Having that "bad" name on my backlinks is not an option. For example I would perceive user reviews connecting my site to that word as a negative point. Maybe having my site as a search result for that word could be negative as well, but I think it is worth it.

    Read the article

  • Black login screen Ubuntu 12.04 if WGA cable pluged in on reboot

    - by Sulliwane
    I'm using Ubuntu 12.04.1, 64 bits, installed on a Z77 Pro4 (ASrock motherboard), crucial M4 SSD drive (sata 3), and intel i5 3570k (ivy bridge). I have this annoying problem : When I startup the computer, I get a CLI login prompt : At this moment, if I press enter, i get the usual CLI login prompt. If not, here is what I get : From now, if I login using CLI, i identify the lightdm processus, kill and start it : #ps -A | grep lightdm #sudo kill -9 1273 #sudo lightdm and miracle, these commands bring back the gui login screen. BUT It's very annoying as I have to repeat these steps at every boot, and the people using this desktop are not familiar with linux at all! So I tried to figure out the cause and here is what I found : If, when I shutdown the computer, the WGA cable is not pluged in, then Ubuntu will boot on GUI login screen without a glitch! But If the WGA cable is pluged in when shuting down, I will get CLI login prompt... Note 1: I installed linux kernel 3.4, but it hasn't solve the problem. Note 2: Is it linked to the new HD 4000 integrated graphic processor ? Note 3: If i boot on an USB stick (Ubuntu 12.04), NO problems ! Note 4: If booting on the SSD, when clicking "shutdown" button, the shutdown process never ends up (logout screen keep displaying and fans are still rolling). But if booting on USB stick, the shutdown action runs properly.

    Read the article

  • Using ASP.NET, Membership, and jQuery to Determine Username Availability

    Chances are, at some point you've tried creating a new user account on a website and were told that the username you selected was already taken. This is especially common on very large websites with millions of members, but can happen on smaller websites with common usernames, such as people's names or popular words or phrases in the lexicon of the online community that frequents the website. If the user registration process is short and sweet, most users won't balk when they are told their desired username has already been taken - they'll just try a new one. But if the user registration process is long, involving several questions and scrolling, it can be frustrating to complete the registration process only to be told you need to return to the top of the page to try a different username. Many websites use Ajax techniques to check whether a visitor's desired username is available as soon as they enter it (rather than waiting for them to submit the form). This article shows how to implement such a feature in an ASP.NET website using Membership and jQuery. This article includes a demo available for download that implements this behavior in an ASP.NET WebForms application that uses the CreateUserWizard control to register new users. However, the concepts in this article can be applied to ad-hoc user registration pages and ASP.NET MVC. Read on to learn more! Read More >

    Read the article

  • What's the strengths and weaknesses of existing configuration management systems?

    - by Daniel C. Sobral
    I was looking up here for some comparisons between CFEngine, Puppet, Chef, bcfg2, AutomateIt and whatever other configuration management systems might be out there, and was very surprised I could find very little here on Server Fault. For instance, I only knew of the first three links above -- the other two I found on a related google search. So, I'm not interested in what people think is the best one, or which they like. I'd like to know the following: Configuration Management System's name. Why it was created (as opposed to using an existing solution). Relative strengths. Relative weaknesses. License. Link to project and examples.

    Read the article

  • Looking for new hosting company

    - by Charles Chadwick
    I am currently looking for a new hosting company for my business. We are a design and development company and have been recommending WestHost to our clients for the last several years. However due to some changes they have implemented in the last year, we have decided to start referring people elsewhere. Most of our clients need affordable Linux hosting with the basics. SSH is also a definite must and 24/7 support (preferably phone, as well as email/ticket system) that won't cost extra. An easy to use and understand control panel would be nice as well. I have heard good things about HostGator, and am wondering if anyone has experience with them. The prices seem right and they have everything we need. We are also thinking of purchasing a dedicated server with them for a specific project that's going to require one. I don't know if I am asking this in the right place, if this is not welcome here please let me know.

    Read the article

  • I'm using a compatible active DisplayPort to DVI adapter with EyeFinity, why does my monitor still flicker?

    - by Christopher Galpin
    I specifically chose an active DisplayPort <- DVI adapter for use with EyeFinity right out of my graphic card vendor's list of confirmed compatible adapters. Yet the screen fails horribly, it blinks on and off constantly, sometimes the graphics go screwy and the appropriate resolutions won't be available. Sometimes the resolution will be available but I'll discover it's only with interlaced refresh rates and bounces up and down. I have to switch the resolution back and forth, again and again, to get it to work correctly, and then it fails again and the process must be repeated the moment the monitor is turned off or I reboot. It's maddening. What is wrong? Is my GFX card supplying insufficient voltage? (Firmware tweaks allegedly help some people, but my card's isn't modifiable.) Could the adapter be defective? Is it not "active" enough for my card and I need an expensive powered adapter? Is this endemic to DisplayPort in general?

    Read the article

  • Common reasons not to use Open Office

    - by Dan McG
    I personally use it on both Windows and Linux, but have MS Office installed at work. I understand that in some business situations there are thousands (upon thousands) of existing MS Office documents that may or may not convert cleanly to Open Office. Not everyone is in that situation though. Among non IT folk, I rarely see OOo. Why is this so? What are common reasons for people not using OpenOffice.org? Are they from before it is even tried, or is it from unsatisfactory experiences when actually using it?

    Read the article

  • What's the best way to move cars along roads

    - by David Thielen
    I am implementing car movement game (sort-of like Locomotion). So 60 times a second I have to advance the movement of each car. The problem is I have to look ahead to see if there is a slower car, stop sign, or red light ahead. And then slow down appropiately. I also want to have the cars take time to go from stopped to full speed and again to slow down. I'm not implementing full-blown physics, but just a tick by tick speed up/slow down as that provides most of the realism to match what people expect to see. The best I've come up with is to walk out the full distance the car would travel of it was slowing to a stop and see if anywhere along that path it needed to slow down or stop. And then move it forward appropiately. I am moving the cars 60 times a second so I need this to be fast. And walking out that whole path each tick strikes me as processor intensive. What's the best way to do this?

    Read the article

  • Question on business connections and page rank?

    - by Viveta
    I just want to ask this question to get a yes no answer on something that I've been wondering on lately. So regarding how there are countless numbers of sites now that use the no-follow; making it harder to get ranking for your page if your website information might be something useful and will get traffic but maybe isn't something that your business connections share content of; but I am trying to find out if the benefit to having a bunch of say "likes" to your facebook page, but all the connection to your website's content isn't passing any benefit to your main page. So are you then competing with your own website in regards to SERPs to your facebook page and that of your home page. Am I correct on this; that if you start having your facebook page doing real good as far as connections and likes (helping bump up your facebook PageRank) but if you have links on your page with certain optimized keywords, that there is no benefit to your website (other than people getting to your facebook page, and then more likely to click to your page). Hope I explained it well what I am asking. Just wanted to get a better picture of this to know what I want to focus on as far as how I'll be linking to my desired landing pages in the future.

    Read the article

  • Challenging Job after Graduate Studies

    - by sriram
    I worked with an M.N.C developing web applications in Java/J2EE related technologies(includes JSF,struts,hibernate etc.) now I quit my job to pursue Graduate Studies in the U.S.A. So I am a student in the middle of my Graduate studies. I had enough of developing mere CRUD applications in J2EE now I want to work in something exciting. The problem is I can't say what exactly but I can give you an examples. Say developing new JDK libraries or writing a kernel for some O.S. or something like that. So I have five questions here. Is it true that people in R & D often use C++ because of higher performance in that case should I consider switching my platform to C/C++? How should I use my time I have one year to graduate to prepare myself for Jobs Interviews for such positions? (e.g. Reading books on Algorithms etc.) How do I know about these jobs and how do I apply to those Jobs? Is it the right time for me to think about Jobs? Am I over ambitious because I am not in a Ivy League, just a normal school? (My GPA is not so high unfortunately).

    Read the article

  • Displaying Datamatrix in application error screen

    - by DaveNay
    Quite often we will get a report from a user in the field saying there was an error in our application. Frequently this leads to the typical round of "What was the error?" "I don't know, it was just an error." We of course log these faults to the log files, and we can even enable detailed debug logs, but this involves the end user changing a setting in the configuration file and then finding the correct files and then emailing them to us. As I'm sure you can all imagine, there are plenty of pitfalls and alligators in this methodology. Recently a couple of people have used their cell phone to email me a "screen capture" of the fault, and while this helps, we still have to scrutinize the image to find the exact fault, and if enabled, the stack trace. So this evening, I had the brilliant idea (IMHO) to encode the fault into a Datamatrix barcode image and then encourage users to send me a picture from their cell phone. I can then decode the datamatrix and get a parse-able error message! Our core technology is machine vision, so the decoding of the datamatrix image would be trivial, I just need to find a method of generating the actual image to display in the fault handler. Thoughts?

    Read the article

  • Is it possible to get xRandR to see two separate outputs with the nvidia driver?

    - by rumtscho
    I have two monitors, which I have set up with nvidia-settings in Twinview. The result: When I want to do something in xRandR, it does not function. It doesn't report one output per video card head, but a single output mapped to the combined area of both monitors: rumtscho@bradbury:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 3840 x 1440, current 3840 x 1440, maximum 3840 x 1440 default connected 3840x1440+0+0 0mm x 0mm 3840x1440 50.0* Now I promised somebody to help test a driver. The developer is using an open source driver for Intel video cards, and his driver assumes that there is more than one xRandR output, each mapped to a monitor. So I tried rewriting my xorg.conf to somehow get two outputs to show up, but failed. Googling showed that people faced with the xRandR-nvidia problem either stopped using xRandR and achieved what they needed with nvidia-settings, or changed their driver to nouveau. The first is not going to help in my situation, and I am not willing to give up the proprietary driver, because Compiz won't work without it. So does anybody know a way to get nvidia to actually pass on information on outputs to xRandR?

    Read the article

< Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >