Search Results

Search found 12790 results on 512 pages for 'port islander 2009'.

Page 347/512 | < Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >

• Can't run node.js script on server reboot

  - by webstyle

  I need to listen events on port 3240 and I'm using node.js for that purpose. I need to execute my script with forever tool. I also need to run forever on server reboot. When I run forever glh.js everything works: forever list says there is a running process. But when I'm trying to run forever on server reboot I can't get it working. I've created a file in /etc/init.d with the following content: #!/bin/bash /var/www/yan/data/gitlabhook/runglh.sh &>/var/www/yan/data/gitlabhook/runglh.log When I reboot the server, the output log is the following (the same as when I run it manually via console): info: Forever processing file: glh.js But in this case forever doesn't start a process. forever list outputs: info: No forever processes running

  Read the article

• How can I secure Postgres for remote access when not in a private network?

  - by orokusaki

  I have a database server on a VMWare VM (Ubuntu 12.04.1 LTS server), and it just occurred to me that the server is accessible via the web, since the same physical server contains a VM that hosts public websites. My iptables in the database are such that only SSH traffic, loopback traffic, and TCP on port 5432 are allowed. I will only allow host access to the Postgres server from the IP of the other VM on the same physical machine. Does this seem sufficient for security, assuming there aren't gaping holes in my general OS configuration, or is Postgres one of those services that should never be web facing, (assuming there are some of "those"). Will I need to use hostssl instead of host in my pg_hba.conf, even though the data will travel only on my own network, presumably?

  Read the article

• configure cisco catalyst 3560g with an egress uplink

  - by imaginative

  Currently my setup has our egress uplink connected directly to an external interface on a linux router/firewall/nat gateway. Since the linux box is a single point of failure, I've since setup two openbsd boxes using carp+pf+pfsync in order to gain some additional redundancy. the problem is, I only have one egress uplink (it's still a single point of failure) but need to get it to speak to the active carp node in my openbsd cluster which will server as my new router/firewall/nat cluster. Is there anything specific I need to do on a 3560G in order for me to be able to: 1) Drop the egress uplink into a port 2) Drop one link from the switch to a firewall 2) Drop a second link from a switch to the firewall This is so if one box dies, the other still has the egress link to the switch. Is putting them into one VLAN enough? Anything else that needs to go into the configuration for this setup to work?

  Read the article

• Configuring Apache reverse proxy

  - by Martin

  I have loadbalancer server and edges. I am trying to configure reverse proxy in order to hide the backend servers PL1,2,3. PL 1,2,3 are not located in same subnet. They are located in different locations. PL1 Lb1 -> PL2 PL3 I tried to configure Apache reverse proxy but it is not sending request to PL1,2,3. Reverse proxy worked only when I configured apache to send request to local server on other port. ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /PL1 http://PL1server.com/ ProxyPassReverse /PL1 http://PL1server.com/ The above configuration did not worked. Could you help me to solve the issue. Or is there other proxy types like Squid,Socks5 to solve this issue. Does the reverse proxy fails if we use IP address or domain URL in ProxyPass and ProxyPassReverse ?

  Read the article

• tcp flags in iptables: What's the difference between RST SYN and RST and SYN RST ? When to use ALL?

  - by Kris

  I'm working on a firewall for a virtual dedicated server and one of the things I'm looking into is port scanners. TCP flags are used for protection. I have 2 questions. The rule: -p tcp --tcp-flags SYN,ACK,FIN,RST SYN -j DROP First argument says check packets with flag SYN Second argument says make sure the flags ACK,FIN,RST SYN are set And when that's the case (there's a match), drop the tcp packet First question: I understand the meaning of RST and RST/ACK but in the second argument RST SYN is being used. What's the difference between RST SYN and RST and SYN RST ? Is there a "SYN RST" flag in a 3 way handshake ? Second question is about the difference between -p tcp --tcp-flags SYN,ACK,FIN,RST SYN -j DROP and -p tcp --tcp-flags ALL SYN,ACK,FIN,RST SYN -j DROP When should ALL be used ? When I use ALL, does that mean if the tcp packet with the syn flag doesn't have the ACK "and" the FIN "and" the RST SYN flags set, there will be no match ?

  Read the article

• Gathering IP's from a complicated log

  - by Harry

  I have a question regarding the use of some more advanced grep, awk, sed. I have a log file, for a proprietary MTA, that contains IP's in a string, delimited by [redacted]^~x.x.x.x^[redacted]. So far all of my grepping, awking, and sedding hasn't gotten me very far. This log file has 331520 lines in it. My goal was to simply grep out the ip's, then do a for loop with sed, to sed 's/$i/redacted'. I'm including a sample of one of the log entries. If you all have any idea, I would be greatly appreciative. Jun 4 15:21:52 host.name mta-name: 13388^~88/CC-04671-FCA0DCF4^~D^~<redactedmessageid>^~@^[email protected]^~redacted.hostname^~000.00.000.000^~port^~esmtp^~^~external_routing_nobounce^~0^~0.51^~subjectofmessage^~250 2.6.0 <redactedmessageid> [InternalId=2178458] Queued mail for delivery

  Read the article

• Can't connect to sql server 2008 named instance

  - by hcsrpm

  I have sql server 2005 and 2008 running on a server on my local (and very straightforward) network. Using sql management studio 2008 and visual studio 2008, I can connect over the network to the 2005 instance which is the default instance. I can't connect to the 08 instance (named MC08). I can connect to both when logged in to the server. Remote connections have been enabled for MC08 and dynamic ports is turned off (assigned to port 1045). The sql browser service is running as well. This used to work so I'm not sure what has changed. I can't connect using the IP address either. Nothing unusual in the event log either. Any ideas?

  Read the article

• Does Juniper Networks provide keyloggers with their software?

  - by orokusaki

  I noticed that I had a "USB Mass Storage Device" plugged in when there wasn't in fact anything plugged in to any USB port. I turned it off via Windows (XP), but it's quite concerning. This was after installing Juniper Networks' software for VPN access to an IT guy's stuff. I also notice there is a service called "dsNcService.exe" which apparently is sending information over the internet (even when I'm not in VPN access). The process restarts itself when I end it. Should I be worried that this software is tracking my keystrokes and broadcasting them to my IT guy?

  Read the article

• Configure Nginx On Separate Server For Zimbra Webmail

  - by alphadogg

  How do I properly configure a server with nginx to front for a Zimbra server with multiple domains? I run a small SOHO network. I NAT/port forwarding on my Comcast router to get traffic to my handful of servers. I setup a server with Zimbra, call it host1.internal.local. The server currently has two domains, call them domain1.com and domain2.com. Both offer webmail access at webmail.domain1.com and webmail.domain2.com. I have a separate server with nginx. I want to configure nginx to reverse proxy, such that I can direct all HTTP/HTTPS, and send webmail traffic via matched host address/headers to the Zimbra server. If possible, I'd like to know how to map IMAP, POP and SMTP traffic too. How would I do this?

  Read the article

• Packet logging on PIX firewall

  - by georged.id.auindex.htm

  We have a Cisco PIX 515 firewall and I would like to set up a simple logging that would give us a traffic breakdown for billing by: source destination protocol port size time PIX is plugged into Catalyst 2970 and I was told that the best thing since sliced bread for logging is to get Netflow and get Catalyst to log. My concern, however, (besides the Netflow cost) is that I really don't want to "listen" to the internal noise and all I'm interested in are the external traffic stats above for billing and analysis purposes. What would be the simplest and the easiest solution? Cheers George

  Read the article

• Trying to understand why VLANs need to be created on intermediate switches

  - by Jon Reeves

  I'm currently studying for the Cisco switching exam and having trouble understanding exactly how 802.1q tagging works. Given three daisy chained switches (A,B, and C) with trunk ports between them and VLAN 101 defined on both end switches (A and C), I'm not sure why the VLAN also needs to be defined on the middle one (B)? Note that I am not disputing that it does need to be configured, I'm just trying to understand why exactly. As I understand it, traffic from VLAN 101 on switch A will be tagged as it goes through the trunk to switch B. According to the documentation I have read, trunks will pass all VLANs by default, and the .1q tag is only removed when the frame leaves through an access port on the relevant VLAN. From this I would expect switch B to simply forward the tagged frame unchanged through the trunk to switch C. Can anyone shed some light on how switch B processes this frame and why it does not get forwarded through the other trunk ?

  Read the article

• how to split a pcap file into a set of smaller ones

  - by facha

  I have a huge pcap file (generated by tcpdump). When I try to open it in wireshark, the program just gets unresponsive. Is there a way to split a file in set of smaller ones to open them one by one? The traffic captured in a file is generated by two programs on two servers, so I can't split the file using tcpdump 'host' or 'port' filters. I've also tried linux 'split' command :-) but with no luck. Wireshark wouldn't recognize the format.

  Read the article

• MySQL Workbench sends computer name with login not IP

  - by Android Addict

  I am attempting to connect MySQLWorkbench to a remote MySQL Server. The server has granted access to user@IPAddress However, when I try to connect MySQLWorkbench, it sends user@computername instead. How do I configure the connection to use the IP address instead in MySQLWorkbench? Reference: The remote server is on the local network, so I need to use the local IP address assigned to my client. EDIT What I have tried so far: from the server: mysql -u user@IPAddress -p --host=(ServerIPAddress) Returns: mysql> So that tells me the user account is operational. Furthermore, I confirmed it exists using: select user from mysql.user; returning a table of all users, of which the user I am using is present. I have also opened the port 3306: sbin/iptables -A INPUT -i eth0 -s clientIPAddress -p tcp --destination-port3306 -j ACCEPT Still I encounter Access Denied

  Read the article

• Problems setting up home web server

  - by putmatrix

  Has anyone been able to get a server working with the router smcwbr14t-g? Although I have been able to get Apache set up correctly and my website works on the internal IP 192.168.2.101, I've been running into a dead end when trying to get it to show up on my external IP. In my router, there is no option for port forwarding, but there are options for a 'virtual server'. Following the manual, I have it set up like this: http://imgur.com/zrcV7.png I also disabled the firewall. I configured Apache to listen to ports 80, 81, and 443, none of which solved the problem. However, the IP's 192.168.2.101:443 and :81 load fine. The problem is that I still cannot load the web site from my external IP, either from my computer or outside.

  Read the article

• not able to mount media to ESX 4.0

  - by jack8138

  Hi, I have ESX 4.0 running on NEC Express 5800 R-120a model. I have 2 VMs running windows XP. I am not able to mount any media to it. When I try connecting the local media to the VM, the error message comes mentioning "a connection to the host could not be established.: I have checked and there is no network issue. ESX is accessible fine. Any help would be greatly appreciated. Besides, I have opened almost all the ports in the firewall just to make sure there is no port conflict.

  Read the article

• TightVNC grey screen?

  - by gary

  I'm trying to help my mom remotely with some PC problems. She's not too computer savvy, so to keep the firewall stuff on my side of things, I tried to use a reverse VNC connection: On my machine, I set up TightVNC client in listening mode. I also opened TCP port 5500 on my router and firewall, and checked it using http://canyouseeme.org/. On her machine, I (instructed her to) set up TightVNC server, and connect to my machine's IP ('Add New Client...'). Both machines run Windows XP & TightVNC 1.3.10. The problem: When she tries to connect, a TightVNC window with grey background pops up on my machine, but I never get to see the remote desktop. It just remains grey. However, it seems that I control the mouse on the remote side (she says it's moving). I tried to reverse-connect from another machine on my LAN and it works without a problem. Any idea what the problem could be?

  Read the article

• Can i have a Asterisk IP PBX Server Behind ISA 2000

  - by garyb32234234

  Hello Is it a simple procedure to configure ISA Server 2000 to allow an Asterisk IPPBX connect to SIP provider. On asterisk forums they say the ISA has difficulties handling SIP, softphones that i have installed behind the firewall work fine with the provider when the firewall client is installed on the workstation. With asterisk being a linux based system this will not be an option. Is the config a matter setting up port forwarding, is this a more complicated task on ISA server than just selecting the ports i need and then the ip of the internal machine i want to forward them to? UPDATE: I dont think this is possible from what ive researched Regards Gary

  Read the article

• Django, wsgi, py. what's the difference?

  - by Kenny

  I'm trying to get a django application up and running on my cpanel system. I've installed mod_wsgi, and am following the guide here: http://www.nerdydork.com/setting-up-django-on-a-whm-cpanel-vps-liquidweb.html However, I'm now confused as I don't know what to do next. The application has .py files, and I am able to run it via this: python manage.py runserver 211.144.131.148:8000 However, that's via command line and binds to port 8000. I want to use Apache instead. The question is, that tutorial doesn't go further into how to get apache to recognize .py files and run the application as I want it. What do I do next?

  Read the article

• Why Mac cannot connect to Iphone?

  - by martin08

  I couldn't always ssh to my iPhone from my Mac. They're both on the same wifi network but sometimes the connection is established, sometimes it failed. From my Mac: $ ssh [email protected] ssh: connect to host 192.168.0.102 port 22: Operation timed out $ ping 192.168.0.102 PING 192.168.0.102 (192.168.0.102): 56 data bytes ping: sendto: No route to host ping: sendto: Host is down ping: sendto: Host is down I enabled SSH on the phone and am sure it can load webpages. So what might be a reason why they cannot connect? Thanks

  Read the article

• How do I configure IIS so my Web.config is determined by URL?

  - by Scott Stafford

  I am running a test rig with IIS6 serving an ASP.NET (and Sharepoint) web site. We have several clients, and so we have custom root Web.config files for each client. For this test rig, I want to just serve straight from the Trunk of our source control. However, I'd like to be able to select different root Web.config files based on the URL (or port or whatever) I use to access the site, so I can just use one checkout of the source and run all the sites with their appropriate settings. Is this possible?

  Read the article

• MRTG + RRDTool Hourly Graph

  - by SuperMicro321

  I am using MRTG + RRDtool to monitor the bandwidth on each switchport of a Cisco Catalyst 2950 via snmp. Is MRTG capable of generating an hourly graph? With RRDtool I was able to set the interval to 1 minute in hopes of getting a more detailed graph, but the shortest timeframe the graph is 'Daily' graph (5 Minute Average) and the image is too small. What I am looking to get out of this: I am looking to be able to visually monitor all of the switch ports and tell when port begins to have unusually high traffic, in real time (1 minute interval of snmp poll, graphs generated, and page refreshed).

  Read the article

• Corrupted .WAR file after transfer from 32-64 bit Windows Server to Desktop or vice versa

  - by Albert Widjaja

  Hi All, Does anyone experience this problem of corrupted .WAR file after it has been copied over the network share ? this is .WAR file (Web Archive) the J2EE application file (.WAR file is compressed with the same zip algorithm i think ?) Scenario 1: Windows Server 2008 x64 transfer into Windows XP using RDP client (Local Devices and Resources) Scenario 2: Windows XP 32 bit transfer into Windows Server 2003 x64 using shared network drive (port 445 SMB ?) for both of the scenario it always failed / corrupted (the source code seems to be duplicated at the end of line when you open up in the Eclipse / Java IDE). but when in both scenario i compressed the file into .ZIP file everything is OK. can anyone explains why this problem happens ? Thanks, Albert

  Read the article

• In IIS why do HTTP requests use the host header, and FTP requests do not

  - by Keeno

  So.... In IIS, if you use the in-build FTP you need to combine the FTP host header in the FTP username e.g. www.hello.com|domain/username So, the FTP program gets its "hook" from the username. However, you can connect to the FTP site using www.hello.com:21 over the FTP port. Why then, doesnt the FTP service work the same way as the HTTP service? IIS knows what site to serve back based on the host header after all.... Thanks!

  Read the article

• How to drop all subnets outside of the US using iptables

  - by Jim

  I want to block all subnets outside the US. I've made a script that has all of the US subnets in it. I want to disallow or DROP all but my list. Can someone give me an example of how I can start by denying everything? This is the output from -L Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT tcp -- anywhere anywhere tcp dpt:ftp state NEW DROP icmp -- anywhere anywhere Chain FORWARD (policy DROP) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination And these are the rules iptables --F iptables --policy INPUT DROP iptables --policy FORWARD DROP iptables --policy OUTPUT ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -p tcp -i eth0 --dport 21 -m state --state NEW -j ACCEPT iptables -A INPUT -p icmp -j DROP Just for clarity, with these rules, I can still connect to port 21 without my subnet list. I want to block ALL subnets and just open those inside the US.

  Read the article

• 2 routers, both DHCP, no IP assigned

  - by piobyz

  I can't get DHCP to assign IP to my wireless devices. My network config is as follows: Nanostation5 Linksys WRT350N, which is connected with Nanostation via its INTERNET port. Nanostation: LAN IP Address: 192.168.1.20 WLAN IP Address: 192.168.0.79 Network Mode: Router and is getting its IP via DHCP from my ISP Netmask: 255.255.255.0 Gateway IP: 192.168.1.1 LAN Network settings: IP Address: 192.168.1.20 Netmask: 255.255.255.0 Enable NAT: YES ENABLE DHCP Server: YES Range 192.168.1.100 ~ 250 Netmask: 255.255.255.0 Enable DNS Proxy: YES Linksys: Internet Connection Type: DHCP Router IP: 192.168.2.1 Subnet Mask: 255.255.255.0 DHCP: Enabled Start IP: 192.168.2.100 ~ 120 Advanced Routing: NAT: Enabled What I can do is connecting manually with this config: IP: 192.168.2.101 Subnet Mask: 255.255.255.0 Router: 192.168.2.1 DNS: 192.168.1.20 Search domains: WRT350N I want to be able to connect to both routers independently(now its 192.168.1.20 for Nanostation, and 192.168.2.1 for Linksys) and connect any wireless device using DHCP. What should be IP ranges, masks, etc. on both devices?

  Read the article

< Previous Page | 343 344 345 346 347 348 349 350 351 352 353 354  | Next Page >