Search Results

Search found 28620 results on 1145 pages for 'ubuntu newb'.

Page 348/1145 | < Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >

• have a bash script remotely shutdown another computer on the lan

  - by gletscher

  Hi I want to write a bash script that when called shuts down another computer on the lan. Maybe using ssh? The other computer is an ubuntu machine. Now I'm not sure how to send e.g. a sudo shutdown -h now command from withing a bash script to the ssh after logging in. Also I'm not sure how to obtain the rights for the sudo command, hence how to handle the communication between the server and client from within a bash script. Any suggestions are greatly appreciated.

  Read the article

• Can't get Wireless to work! (Fujitsu siemens ESPRIMO Mobile u9200) Ubuntu 12.4

  - by Martin Oscarsson

  I can't get wireless to work on my computer. I have recently installed 12.04. Computer name: (Fujitsu siemens ESPRIMO Mobile u9200) Hardware button starts bluetooth - so can't start that way. Have searched the Internet for help but can't find any on my specific problem! State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath5k State: disconnected Default: no *-network beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. HERE IS ALL THE NETWORK INFO: ellika@ellikas:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13778 errors:0 dropped:0 overruns:0 frame:0 TX packets:9510 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14022669 (14.0 MB) TX bytes:1001621 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig [sudo] password for ellika: eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13801 errors:0 dropped:0 overruns:0 frame:0 TX packets:9528 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14024965 (14.0 MB) TX bytes:1002836 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ phy0 Wireless LAN phy0: command not found ellika@ellikas:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.4-1ubuntu2 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm ellika@ellikas:~$ sudo rf-kill unblock all sudo: rf-kill: kommandot hittades inte ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sedan sudo ifconfig wlan0 sedan: command not found ellika@ellikas:~$ sudo ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:22:5f:3f:63:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ellika@ellikas:~$ ^C ellika@ellikas:~$ ^C ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" ^[[C^[[C^[[C^[[C^[[C^[[B wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.4 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.451/10.517/10.631/0.062 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux ellika@ellikas:~$ ellika@ellikas:~$ clear ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.5 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.476/10.522/10.602/0.045 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux

  Read the article

• send outgoing email via postfix from mail client

  - by Ey Jay

  I have installed postfix on my ubuntu that is hosted on digitalocean. What I want to do is. With my smtp server setup, I want to use it to send mail from my email client. I don't need to receive, I just need to send. I can telnet example.com 25 successfully, I received the email in my inbox, but when I tried using in a email client. smtp: example.com:25 user: smtp1user password: smtp1userpassword I get an error that says "Server doesn't respond. Try changing the port." I dont know how to proceed.

  Read the article

• Why aren't Heroku syslog drains logging to rsyslogd?

  - by Benjamin Oakes

  I'm having a problem using syslog drains as described in https://devcenter.heroku.com/articles/logging. To summarize, I have an Ubuntu 10.04 instance on EC2 that is running rsyslogd. I've also set up the security groups as they describe, and added a syslog drain using a command like heroku drains:add syslog://host1.example.com:514. I can send messages from the Heroku console to my rsyslogd instance via nc. I see them appear in the log file, so I know there isn't a firewall/security group issue.  However, Heroku does not seem to be forwarding log messages to the server that heroku drains lists. I would expect to see HTTP requests, Rails messages, etc. Is there something else I can try to figure this out? I'm new to rsyslogd, so I could easily be missing something.

  Read the article

• Heartbeat won't start up from a cold boot when a failed node is present

  - by Matthew

  I currently have two ubuntu servers running Heartbeat and DRBD. Let's say one node is down... The servers are directory connected with a 1000Mbps cross over cable on eth1 and have access to a IP camera LAN on eth0 The node that is still functioning won't start up heartbeat and provide access to the drbd resource. I have to manually restart heartbeat by "sudo service heartbeat restart" to get everything up and running. How can I get it to start fine from a cold start? Here is the my ha.cf and some material from the syslog... If I'm missing any information that might be of some help. http://pastebin.com/rGvzVSUq <--- Syslog http://pastebin.com/VqpaPSb5 <--- ha.cf

  Read the article

• How do I change the document root of a Linux Apache server?

  - by Daryl Spitzer

  I'm trying to learn how to configure an Apache HTTP server (with which I have no experience) someone else has setup in a VM running Ubuntu 8.04. I know the server is running, since I get "<html><body><h1>It works!</h1></body></html>" when I go to http://1.2.3.4/ (where 1.2.3.4 is the VM's IP number). I found apache2.conf and httpd.conf (among other files) in /etc/apache2/. httpd.conf is empty. I tried adding DocumentRoot "/home/username/temp" into /etc/apache2/httpd.conf and put some simple HTML in /home/username/temp/index.html. But when I reload http://1.2.3.4/ there's no change. Do I need to restart httpd to get it to accept the change to DocumentRoot?

  Read the article

• OS X Can't Access Netatalk Shares

  - by Rogger Matamoros

  In my home network, I have a server running Ubuntu 10.4, configured to share files to my MacBook Pro running Snow Leopard (10.6.8) with Netatalk and Avahi. It was working like a charm until one day it stopped working. I can see my server in Finder, I can enter a username and password, and it seems to accept it all, but Finder gets stuck "Connecting" until it times out. I've checked the afpd.conf and AppleVolumes.default. They are all intact. My guess is that an update broke something, but I don't know how to troubleshoot it further. Any suggestions?

  Read the article

• iptables -L lags on non localhost or anywhere address

  - by DazSlayer

  I am trying to configure iptables for ubuntu 10.04 and I have a problem with iptables -L lagging on rows where the destination or source address is not localhost or anywhere. The following entries will cause lag on their row: iptables -A INPUT -p tcp --dport 111 -s 192.168.1.14 -j ACCEPT iptables -A INPUT -p tcp --dport 90 -d 192.168.1.14 -j ACCEPT while this does not: iptables -A INPUT -p tcp --dport localhost -s 192.168.1.14 -j ACCEPT iptables -A INPUT -p tcp --dport localhost -d 192.168.1.14 -j ACCEPT I feel like this might be due to iptables checking to see if the ip is reachable. If not, what is the cause, if it is how can I disable it?

  Read the article

• Courier MYSQL_QUOTA_FIELD isn't working

  - by JoeCoder

  In /etc/courier/authmysqlrc, I have MYSQL_QUOTA_FIELD CONCAT(quota, 'S') But connecting to the account via RoundCube or Thunderbird with the Display Quota plugin shows an unlimited/unknown quota. In the quota field, I have entered 1000000, and this table/row is otherwise working perfectly for authentication. I enabled mysql logging and checked the query log for the query that courier is executing for auth. When I execute it myself it works fine and correctly returns "1000000s" for the quota. I'm using Ubuntu Server 12.04. Any ideas?

  Read the article

• How to backup a remote VPS machine?

  - by morpheous

  I am considering opting for a VPS solution, with the server running Ubuntu server. I am pretty new to this, and I need to come up with a backup policy for my server data. Initial data is likely to be about 80Mb, and I expect the data to grow at approximately 5Mb to 10 Mb a day. Can anyone recommend: A backup/restore policy (best practises for a small startup) Which tools to use for backup? Another thing that is not clear to me is - where are the files backed up to normally (in the case of remote servers). If the files are backed up to the same machine (or even to another machine but with the same host), there is potentially, a single point of failure). How do people normally backup their server data, and is the probability of machine meltdown or the host company server farm "catching fire" so remote as not to be worth worrying about - especially for a small (read one man) startup like me?

  Read the article

• Automatic storing package before installing it on .deb based system?

  - by macias

  The reason I am asking this question is I am concerned about simple rollback (I already read how to find out what packages were installed). So I would like to set global (per entire system) option, that forces system to store each package before installing/updating it. With such workflow, I could update whatever I want, and if for example the newest version of Dolphin would be worse than previous one I could simply go to directory with stored packages and install previous version instead (the previous version is either base version -- on ISO -- or version from previous update). Is there such feature as global option to automatically store each package before install? It have to be guaranteed that no package is updated on-fly, i.e. without being stored before. I am learning LMDE, but answer for any .deb based system would be fine -- Ubuntu, Debian, you name it.

  Read the article

• Nagios check_bgp_neighbors plugin showing critical status

  - by user141610

  I am trying to configure nagios check_bgp_neighbors plug-in on Ubuntu and followed README file of check_bgp_neighbors plug-in. I have made following changes: define command{ command_name check_bgp_all command_line $USER1$/check_bgp_neighbors -H $HOSTADDRESS$ -C $USER3$ -n $ARG1$ -n $ARG2$ } to define command{ command_name check_bgp_all command_line /usr/local/nagios/libexec/check_bgp_neighbors.sh -H xx.xx.xx.49 -C snmpName -n xx.xx.xx.50 And define service{ use server-service hostgroup_name svc-bgp1 service_description BGP Check 1 check_command check_bgp_all!10.0.0.1!172.16.0.2 } to define service{ use generic-service hostgroup_name svc-bgp1 service_description BGP Check 1 check_command check_bgp_all!xx.xx.xx.50 } xx.xx.xx.49 is the IP of the host router and xx.xx.xx.50 is the IP of eBGP neighbour. Status information: line: neighbor:xx.xx.xx.50:sent:78838:received:9769 Failed: status:6 prefixes:16 sent:0 received:1 Log [1353997904] SERVICE NOTIFICATION: router1;router1;BGP CHECK 2;CRITICAL;notify-service-by-email;line: neighbor:103.7.248.50:sent:78842:received:9772 [1353997904] SERVICE NOTIFICATION: router1;router1;BGP CHECK 2;CRITICAL;notify-service-by-sms;line: neighbor:103.7.248.50:sent:78842:received:9772 Why does it show critical status???? I am not getting response for this question, if you need additional information please mention it in comment.

  Read the article

• How to increase max FD limit for a daemon process running under a headless user?

  - by Ameliorator

  To increase the FD limit for a daemon process running under a headless user on a Ubuntu Linux machine we did following changes in /etc/security/limits.conf soft nofile 10000 hard nofile 10000 We also added session required pam_limits.so in /etc/pam.d/login. The changes got reflected for all the users who logged out and logged in again. Whatever new processes are starting under those users are getting new FD limits. But for the daemon which is running under a headless user the changes are not getting reflected. what is the way by which the changes can be reflected for the daemon which is running under headless user ?

  Read the article

• How do I force specific permissions for new files/folders on Linux file server?

  - by humble_coder

  I'm having an issue with my install of Ubuntu 9.10 (file server) and its samba permissions. Logging in and reading works fine. However, creation of new directories by users restricts access for other users. For instance, if Bob (Windows user who maps the drive) creates a folder in the directory, Jane (Mac user that simply smb mounts) can read from it, but can't write to it -- and vice versa. I then must go CHMOD 777 the directory for everyone to be happy. I've tried editing the "create/directory mask", and "force" options in the smb.conf file but this doesn't seem to help. I'm about to resort to CRONTABing a recursive chmod routine, although I'm sure this isn't the fix. How do I get all new items to always be 777? Does anyone have any suggestions to fix this ever-occurring situation? Best

  Read the article

• How do I make webmin secure?

  - by Josiah

  I want to install webmin to make server administration tasks on my Ubuntu 10.4 server easier. However I'm very nervious about having that kind of power accessable over the web. So I want to know how to secure webmin so that it can't be used to comprimise my server. So far here are my ideas, but I still don't feel comfortable: Make webmin accessable from only the localhost (how?) Use SSH tunneling to access the webmin server whenever I need to administrate it Can anyone help me with instructions on making webmin accessable only from the localhost? What other ways can I make webmin secure?

  Read the article

• localhost name error with linux machines

  - by coderex

  Hi, CASE 1: I have a Ubuntu machine with name midhun.local I can access this in http://midhun.local/svn ... But its can't access from other machines(both Windows and Linux) through this host name. But it works with http://192.168.1.192/svn CASE 2: I have a another machine(windows) having the host-name myname:555 In this case i can access https://myname:555/svn from other windows machines with the same URL. But if am trying to access from the a Linux machine it will not work with the same URL instead of that https://192.1.168.111:555/svn will work. How can I solve the problem. I need to access via the same name from cross domain. How is it possible in LAN Thanks in advance!!

  Read the article

• cannot access new drive through nfs

  - by l.thee.a

  I am running nfs-kernel-server to access my files on my linux machine(ubuntu - /share). The disk I have been using is full. So I have added a new disk and mounted it to /share/data. My other pc mounts the /share folder to /mnt/nfs; but cannot see the contents of /mnt/nfs/data. I have tried adding /share/data to /etc/exports, but it did not help. What do I do? PS: I am looking for another solution than explicitly mounting /share/data on the second drive.

  Read the article

• Is it possible to control my CPU frequency?

  - by Tim

  My laptop's CPU Type is: Mobile AMD Turion 64 ML-30, 1600 MHz (8 x 200) I was wondering how to find out if its CPU frequency is controllable? What softwares or other ways can control my CPU frequency? My OSes are Windows XP and Ubuntu. Can I control CPU frequency so that the CPU temperature can be controlled not to exceed some temperature? Thanks and regards! More information: My laptop is Acer Aspire 5000. Its motherboard is reported by Speccy as: Manufacturer: Acer, Inc. Model: Lugano M Version: Not Applicable Chipset Vendor: SiS Chipset Model: 760GX Chipset Revision: 03 Southbridge Vendor: SiS Southbridge Model: LPC Bridge Southbridge Revision: 25 BIOS Brand: Acer Version: 3A19 Date: 05/17/05

  Read the article

• sSMTP Configuration Question

  - by SevenCentral

  I've installed sSMTP on Ubuntu 10.04 via: sudo apt-get install ssmtp My configuration file is: # # Config file for sSMTP sendmail # # The person who gets all mail for userids < 1000 # Make this empty to disable rewriting. [email protected] # The place where the mail goes. The actual machine name is required no # MX records are consulted. Commonly mailhosts are named mail.domain.com mailhub=smtp.gmail.com:587 # Where will the mail seem to come from? #rewriteDomain= # The full hostname hostname=somedomain.com # Are users allowed to set their own From: address? # YES - Allow the user to specify their own From: address # NO - Use the system generated From: address #FromLineOverride=YES [email protected] authpass=**** usestarttls=yes Am I transmitting my credentials in clear text? Is calling ssmtp a secure operation? Thanks.

  Read the article

• create video from jpg images using ffmpeg

  - by floppydisk

  I want to make short timelapse video using ffmpeg under ubuntu 12.04 LTS. I have a folder containing all images with names DSC_0000.jpg DSC_0001.jpg and so on. I found this question ffmpeg: create a video from images and I try to run the same command as mentioned there: ffmpeg -i DSC_%d.jpg -vcodec mpeg4 timelapse.avi and it fails with DSC_%d.jpg: No such file or directory I've also tried ffmpeg -i DSC_%04d.jpg -vcodec mpeg4 timelapse.avi and it fails with the same error And also for some reason my ffmpeg does not understand option -start_number, if I run ffmpeg -start_number 0 -i DSC_%d.jpg -vcodec mpeg4 timelapse.avi I get this error: Unrecognized option 'start_number' Failed to set value '0' for option 'start_number' I would appreciate any help

  Read the article

• Speeding up remote X sessions

  - by Alexander Gladysh

  I have a remote machine running Ubuntu 11.10 Server, to which I connect via SSH from OS X 10.7.3: Host remote.example.com ForwardX11 yes ForwardX11Trusted yes Sometimes I want to launch a GUI application there (most notably, gitk). But UI is rather slow. Both remote machine and my own Mac have good internet connection. Ping between them is about 55ms, and there is no packet loss. Is there something I can do to speed things up? Setting up some other remote desktop solution is an option, but I'd like to avoid it since I don't need this application very often.

  Read the article

• Why do I get duplicated entries in my $PATH?

  - by reprogrammer

  I'm using Ubuntu 9.10 (karmic). And, my ~/.pam_environment looks like the following. PATH DEFAULT=${PATH}:~/Adobe/Reader9/bin:~/texlive/2009/bin/x86_64-linux GIT_EDITOR DEFAULT=vim MANPATH DEFAULT=${MANPATH}:~/texlive/2009/texmf/doc/man INFOPATH DEFAULT=${INFOPATH}:~/texlive/2009/texmf/doc/info But, echo $PATH returns me duplicated entries as the following. /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:~/apps/Adobe/Reader9/bin:~/apps/texlive/2009/bin/x86_64-linux:~/apps/Adobe/Reader9/bin:~/apps/texlive/2009/bin/x86_64-linux I've tried replacing DEFAULT by OVERRIDE in my ~/.pam_environment file. But, that didn't help. Does any one know what's wrong with my ~/.pam_environment?

  Read the article

• Munin - apache_watch_ plugin, does not show any data in the graphs that shows activity for per vhosts

  - by ovais.tariq

  I am using Munin for monitoring my server. I installed the apache_watch_ plugin so that i could see apache related activity. The graphs for apache_accesses, apache_processes and apache_volume work fine. But the graphs for Apache Documents served, Apache Input/output (bytes), Apache Requests don't show any activity in the graph. The important thing is that these graphs that don't show anything are supposed to show the data divided per vhosts. I am on Ubuntu 10.04.1 LTS (Lucid Lynx) and the munin version is 1.4.4. One thing that I think may be the cause for issue is that I have a separate config file for every vhost, which are included in the main config. But I can't really figure out any solution. Any help will be greatly appreciated!

  Read the article

• How to test KVM guest CPU maximum allocation limit?

  - by Ace

  Running Ubuntu 13.04 Host and vm Guest. Using virtio for hdd, nic. Max-allocaion CPU cores is 6, minimum is 2. Ive made a vm with virt-manager just to play with, and to test out kvm. Alright, I have a decent understand how the memory balloon driver works, but I still dont know how to test if the guest OS can utilize the max setting for cpu cores. From what i gather, the host will start one thread of qemu for each core allocated per vm. When i run htop inside the guest, it only shows two cores. (also here is the output of cat /proc/cpuinfo: https://gist.github.com/anonymous/93a361545130923537da ) How can I "force" the guest to allocate the other 4 cores so that it can show 6 cores in htop? Is there a way to do this?

  Read the article

• Setting up Shibboleth to secure part of a website

  - by HorusKol

  I've installed the Shibboleth module for apache on Ubuntu 10.04 using aptitude to install libapache2-mod-shib2 as per https://groups.google.com/group/shibboleth-users/browse_thread/thread/9fca3b2af04d5ca8?pli=1 and enabled the module (I have checked in /etc/apache2/mods-enabled) I then proceeded to secure a directory on the server by placing a .htaccess file with the following directives: AuthType shibboleth ShibRequestSetting requireSession 1 Require valid-user Now - I haven't set up an SSL host yet - and I also haven't set up the IdP - but I would expect that the server would block access to this directory - but I'm getting the content without any problems. I have restarted the apache service and I have no errors in the log files.

  Read the article

< Previous Page | 344 345 346 347 348 349 350 351 352 353 354 355  | Next Page >