Search Results

Search found 27891 results on 1116 pages for 'boot options menu'.

Page 349/1116 | < Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >

• Which FLOSS text editor is most like kwrite without being KDE-based?

  - by darenw

  Among text editors on Linux, I usually prefer KWrite. I like that I can quickly turn on/off line numbers and line wrap in the View menu. Other settings are easy to change. Other text editors I've used in the past, such as Gnome's gedit, bury line numbering and wrapping checkboxes deeper into the menu system, making it more distracting to change while concentrating on real work. However, KWrite is a KDE app. On Ubuntu it drags in over a dozen other packages, which I suspect I don't really need. Why would a text editor need all that? It's slower to start up than some other editors I've tried. I'm also trying to run an all-gnome system w/o any KDE, just to see how far I get with it. So, what GUI text editor isn't KDE-based, has few dependencies and quick start-up, easy to change line wrap and numbering, and general similarity to KWrite? What comes closest?

  Read the article

• Software RAID 10 on Linux

  - by vpetersson

  For a long time, I've been thinking about switching to RAID 10 on a few servers. Now that Ubuntu 10.04 LTS is live, it's time for an upgrade. The servers I'm using are HP Proliant ML115 (very good value). It has four internal 3.5" slots. I'm currently using one drive for the system and a RAID5 array (software) for the remaining three disks. The problem is that this creates a single-point-of-failure on the boot drive. Hence I'd like to switch to a RAID10 array, as it would give me both better I/O performance and more reliability. The problem is only that good controller cards that supports RAID10 (such as 3Ware) cost almost as much as the server itself. Moreover software-RAID10 does not seem to work very well with Grub. What is your advice? Should I just keep running RAID5? Have anyone been able to successfully install a software RAID10 without boot issues?

  Read the article

• Getting FC11 to run under VMware Server, converted from physical machine

  - by Kristian

  I have a FC11 installation that I have converted to a VMware disk image to run om my VMware Server. I converted it with qemu-img, as the VMware Converter software apparently only converts Linux hosts to VMware Infrastructure servers. The disk image boots fine (grub is loaded and boots the kernel) but it seems like the disk is not found by the kernel, and the boot process stalls. Hotplugging USB devices work (the kernel prints debug information) and I'm able to press keys (Ctrl-Alt-Delete for instance). The VMware guest OS is set to RedHat Enterprise Linux 5 (32 bit), and I have tried both the LSI Logic, LSI Logic SAS and VMware Accelerated SCSI SCSI controllers, to no avail. I'm able to boot an installer disk and get into rescue mode and mount the filesystem, so my question is, what do I need to do to the guest kernel / initrd image to make it recognize the virtual disk?

  Read the article

• Windows 7 x64 how to verify integrity of ALL files on an NTFS disk?

  - by kilves76

  Looking for a tool that would verify integrity of ALL files on a Windows 7 x64 NTFS disk reliably? This is for testing of experimental defrag software, so it really needs to be secure and foolproof. I know it will take a long time, there's millions of files on the disk, but safety just cannot be compromised in a situation like this. Freeware solution much preferred. Can be either Windows software (=inducing pitfalls about files changing due to booting Windows) or a stand alone boot (for example linux boot cd + usb key for storing chksum/metadata).

  Read the article

• Can I make Gimp 2.8.4 in OSx make the file I just opened be the top window automatically?

  - by joe larson

  When I open an image file in Gimp 2.8.4 in OSx Mountain Lion 10.8.4 via the File Open menu, it does not automatically make that image the top window, requiring that I then find that window via the Window menu. Very jarring UX! Is there a way to modify this behavior so that it behaves like most GUI applications and brings the document just opened to the fore? Is this a bug in Gimp 2.8? Interestingly in my Ubuntu 12.04 with Gimp 2.6.12 this is not a problem. Since I haven't used Gimp much at all until this month, I don't know if this is a new problem or not.

  Read the article

• Xen 4.0.1 on Ubuntu 10.10 not booting

  - by Disco

  I'm trying to get Xen 4.0.1 run as dom0 on a fresh/clean install of 10.10 desktop (x64). Followed the step by step tutorial at http://wiki.xensource.com/xenwiki/Xen4.0 I have the pvops kernel in /boot, also included the ext4 fs support by recompiling the kernel by : make -j6 linux-2.6-pvops-config CONFIGMODE=menuconfig make -j6 linux-2.6-pvops-build make -j6 linux-2.6-pvops-install Here's my grub entry : menuentry 'Xen4' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 insmod ext3 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set 2bf3177a-92fd-4196-901a-da8d810b04b4 multiboot /xen-4.0.gz dom0_mem=1024M loglvl=all guest_loglvl=all module /vmlinuz-2.6.32.27 root=UUID=2bf3177a-92fd-4196-901a-da8d810b04b4 ro module /initrd.img-2.6.32.27 } blkid /dev/sda1 gives the : /dev/sda1: UUID="2bf3177a-92fd-4196-901a-da8d810b04b4" TYPE="ext3" My partition shemes is : /boot (ext3) / (ext4) Whatever option i've tried i end up with : mounting none on /dev failed: no such file or directory And message complaining that it cannot find the device with uuid ... It's taking my hairs out, if somone has a clue ...

  Read the article

• No GUI after upgrade to Ubuntu 9.10 (boots to command line)

  - by Gathris

  I have just upgraded to Ubuntu 9.10 (network upgrade using the update manager, from 9.04 which had different graphics related problems) and when I try to boot into it all I get a small Ubuntu logo, flickering text and then the tty1 command line with a logon prompt. startx gives following error: Fatal server error: no screens found I traced down a tutorial that said I needed the latest graphics drivers (Gigabyte ATI Radeon 4650 HD installed with 9.10 catalyst drivers) so I did using the 'sh' command and a USB stick (I have a working Windows partition) and it installed fine but did not fix the problem. Edit: Thanks to UK and Arjan van Bentem below I was able to understand the full error message of start x: Parse error on lone 2 of /etc/X11/xorg.conf 'nameserver' is not a valid keyword in this section Fatal server error: no screens found This has nothing to do with a graphical error (sorry if I misled anyone) but the xorg.conf file has 3 lines in it and lines 2-3 have an entry 'nameserver'. Using the nano command I commented out (using a # before the entries) the nameservers and can now boot Ubuntu. Thanks to everyone for their help.

  Read the article

• systemctl enable differs from systemctl start, how?

  - by rudi_visser

  I am running an Arch Linux (latest, up-to-date) box, and attempting to get MySQL to start at boot. With the systemd package installed I have systemctl available, and as such I can do things like this: systemctl start mysqld.service systemctl [stop|status|restart] mysqld.service That's all fine, and works great when I want to start/stop manually, however, when it comes to getting it to start at boot (by using 'enable' on systemctl, I get some nasty output): [root@rudivarch ~]# systemctl enable mysqld.service Failed to issue method call: No such file or directory Obviously, since the other commands work just fine, I'm seriously confused by this and have spent a good while trying to figure it out... systemctl status outputs this: [root@rudivarch ~]# systemctl status mysqld.service mysqld.service Loaded: loaded (/etc/rc.d/mysqld) Active: inactive (dead) since Tue, 31 Jan 2012 15:32:28 +0000; 1min 25s ago Process: 589 ExecStop=/etc/rc.d/mysqld stop (code=exited, status=0/SUCCESS) Process: 257 ExecStart=/etc/rc.d/mysqld start (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/mysqld.service Anybody have any ideas as to why 'enable' doesn't work?

  Read the article

• Mac OS X software always order files alphabetically rather than by type.

  - by george

  I have noticed many Mac applications sort the files alphabetically rather than by type. A good example would be Coda by panic.com. The files in the file menu are organized alphabetically. I requested for them to add the feature to organize files by type, and they've said that it's a Finder thing. So I looked at other applications to see if they were organizing by type. I noticed Dreamweaver CS4 had this same problem and now including Dreamweaver CS5. There has to be something in the Mac that does this and that I can modify. I played with Spotlight and it now displays its files by type (thinking that's what I can do) but it didn't take effect in other applications. What library are these applications using to display a file menu for their files?

  Read the article

• How to execute a shell script on startup?

  - by vijay.shad

  I have create a script to start a server(my first question). Now I want it to run on the system boot and start the defined server. What should I do to get this done? My findings tell me put this file in /etc/init.d location and it will execute when the system will boot. But I am not able to understand how the first argument on the startup will be start? Is this predefined somewhere to use start as $1? If I want to have a case startall that will start all the servers in the script, then what are the options I can manage. My Script is like this: #!/bin/bash case "$1" in start) start ;; stop) stop ;; restart) $0 stop $0 start ;; *) echo "usage: $0 (start|stop|restart)" ;; esac

  Read the article

• Toshiba Satellite L630 broken after bios update

  - by Mustafa Kamal

  I have Toshiba Satellite L630, which has been broken. It had no more OS installed in it. All the disk partition were cleared into one single empty unformatted partition. So I begin to install windows XP on this laptop. Apparently, win XP's driver support for this laptop is very limited. So I have to find almost all important driver (display, sound, etherned, wireless etc) on the net and install it manually one by one. So I start googling, and I got some driver download page from several Toshiba's website (the global version, the europe, asia, etc). Pretty hard to find the exact drivers, but I managed to find pretty good drivers. It's all works quite fine, although still have a few glitches. But everything turned into a big mess when I downloaded the "BIOS Update", which is also listed on Toshiba's official driver directory site. When I installed it, it show a big red warning sign telling me not to do anything while flashing the BIOS . I follow that instruction prudently. The process was finished, and that update BIOS software (it is InsydeH2O BIOS) told me that the BIOS has been succesfully updated and the computer need to restart. So I restart the computer. This is where the problem appear. I can no longer boot to my laptop. The booting process seems to be able to enter windows for a moment (it shows the windows XP loading screen), and then suddenly it just got that hateful blue screen and then instantiy restarts the machine. It goes on a loop. Boot bios - enter XP - blue screen - restart. I can't even try to reinstall my win XP again. Evertime the machine tries to boot to win XP CD, it got the same blue screen as I gets when loading from HDD. Many google search results said that I should open the laptop cover and try to clear CMOS with some kind of jumper or something. Or to unplug/re-plug the CMOS battery. Do I really need to do that? Is there anyway I could do without disassembling my laptop? I read some tricks about booting from USB device but I can't get the exat tools that I need to do that thing... Btw, this is my detailed laptop number photographed from the back of my laptop

  Read the article

• Proper way for changing MAC address in a linux VM?

  - by HappyDeveloper

  I tried to change the MAC address in a ubuntu VM (virtualbox), but after that it threw lots of errors during boot, and then I had no internet connection. Then I saw that the interface was renamed to eth1, so I edited /etc/network/interfaces to change eth0 to eth1, rebooted (didn't know how to restart the network), and boot was now faster and internet worked fine. But now after every time I log in, I get 1 or 2 error messages that say nothing, they only ask me if I want to report them. So I was wondering, is there was a proper way to change MAC address, to avoid these issues?

  Read the article

• Windows Server 2008 hangs up while booting

  - by Jim R

  Windows Server 2008 hangs up while booting after Windows update applied several updates. The server is a virtual instance on a Server 2008 Hyper-V host. Other virtual servers are fine, but have not been updated. The normal boot shows the horizontal barber poll forever. When I do a safe boot it also hangs up. With a "Please Wait..." after loading many '.sys' files. The last successfully loaded file listed is: '\Windows\system32\drivers\crcdisk.sys' That is the extent of what I have been able to determine.

  Read the article

• Vista locks up after ~10h. of activity

  - by Naomi

  Hi everybody, I am experiencing a problem: Windows Vista completely freezes/locks up lately... It happened today twice - the mouse and keyboard stopped responding and I had to re-boot. I checked the Application Events Log and I see these two errors: Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. and then The following boot-start or system-start driver(s) failed to load: SASDIFSV SASKUTIL I checked Help online and it points to http://technet.microsoft.com/en-us/library/cc756390%28WS.10%29.aspx and suggests Updating the drivers. I'm not sure why would I have problem with drivers and if so, how can I find out which drivers to update? Can you please help me? Thanks in advance.

  Read the article

• OS X 10.6 Snow Leopard no longer mounting an external USB drive

  - by Brant Bobby

  I have a 1TB generic external hard drive containing a single HFS partition. I originally formatted this using Disk Utility and it worked fine. Now, for some reason, it's not auto-mounting when I start up. Using mount at the command line gives the following error: $ sudo mount /dev/disk1s2 /Volumes/Test /dev/disk1s2 on /Volumes/Test: Incorrect super block. ... but if I use the mount_hfs command it works fine, mounts, and is readable. $ mount_hfs /dev/disk1s2 /Volumes/Test/ fsck gives me an error about a bad super block: $ fsck /dev/disk1 ** /dev/rdisk1 (NO WRITE) BAD SUPER BLOCK: MAGIC NUMBER WRONG ... but fsck_hfs -fn /dev/disk1s2 doesn't find any problems and reports that the volume appears to be OK. In Disk Utility, the drive appears to have a single MS-DOS partition with a curious notice about how it appears to be partitioned for Boot Camp: I have the Boot Camp HFS driver installed in WIndows 7, and that OS sees the drive/partition normally. What's wrong with my disk?

  Read the article

• Web hosting for multiple web sites providing system isolation

  - by Justin

  We have a small number of projects where we expect the client will not be maintaining the installed versions of applications we install to power the site (such as Drupal). Given that an important part of security is keeping things updated, we don't want to host these projects on our Plesk-powered dedicated servers that currently host lots of our other client's websites. Our goal is to find a host where we can deploy isolated instances (be these slices, virtual servers, grid servers, etc) for each individual (or groups of 2-3) web sites as we need them. These instances would be completely separate, so that if one web site were hacked it would not impact any other site. Typical hosting requirements: Linux Apache PHP 5 MySQL Supports Drupal Ability to setup a cron task (but we don't need SSH access) Daily backups Virtualized/cloud hosting (we want to avoid shared) Pricing per site is around $25/month OS is patched automatically Some options we have considered but won't work: MediaTemple: Two major data center-wide security incidents and recent downtime foster doubt about this host's technical ability. Slicehost: This would require us to manage the entire server, which we don't want to do. Rackspace Cloud Sites (formerly Mosso): No backup options. Do you have any recommended hosting options for given these requirements?

  Read the article

• Winxp system context menus blank after last security update

  - by Peter Rowell

  Because of a CERT advisory of several out-of-band security updates released by MS I did a Critical Updates pass on my WinXP Pro SP3 machine. I now have the situation where it seems that all of my WinXP-generated menus come up with all items black. If I wave the cursor over the menu, the items will update as they become active (go blue) and then update correctly (to black-text-on-white-background) as they go non-active. Separators (which never get a hover event) stay black. App-level context menus seem to work fine (Firefox, OpenOffice, etc.) with the exception of Windows Explorer and Internet Explorer, which both exhibit this behavior on both their context menus and on their menu bar drop down menus. I'm assuming that's true because they are all using the same library code. Thoughts? Fixes? Help!

  Read the article

• Assets not served - Apache Reverse proxy - Diaspora

  - by Matt

  I have succeeded in installing Diaspora* on my subdomain diaspora.mattaydin.com. I have VPS running CentOS 5.7 with Plesk installed. By means of an vhost.conf and vhost_ssl.conf file I, (with the help of another gentleman) have managed to reverse proxy the app. vhost.conf: ServerName diaspora.mattaydin.com ServerAlias *.diaspora.mattaydin.com <Directory /home/diaspora/diaspora/public> Options -Includes -ExecCGI </Directory> DocumentRoot /home/diaspora/diaspora/public RedirectPermanent / https://diaspora.mattaydin.com vhost_ssl.conf ServerName diaspora.mattaydin.com DocumentRoot /home/diaspora/diaspora/public RewriteEngine On RewriteCond %{DOCUMENT_ROOT}/%{REQUEST_FILENAME} !-f RewriteRule ^/(.*)$ balancer://upstream%{REQUEST_URI} [P,QSA,L] <Proxy balancer://upstream> BalancerMember http://127.0.0.1:3000/ </Proxy> ProxyRequests Off ProxyVia On ProxyPreserveHost On RequestHeader set X_FORWARDED_PROTO https <Proxy *> Order allow,deny Allow from all </Proxy> <Directory /home/diaspora/diaspora/public> Options -Includes -ExecCGI Allow from all AllowOverride all Options +Indexes </Directory> DocumentRoot /home/diaspora/diaspora/public Basically it's working. However, the only thing that's not working are the assets. The do not get loaded not the server, as seen on diaspora.mattaydin.com The error messages I get in the access_ssl.log are a lot of: 11/Dec/2012:19:04:05 +0100] "GET /robots.txt HTTP/1.1" 404 2811 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_2) AppleWebKit/536.26.17 (KHTML, like Gecko) Version/6.0.2 Safari/536.26.17" The error messages I get from diaspora's log file is: Started GET "//assets/branding/logo_large.png" for 77.250.99.193 at 2012-12-11 20:13:11 +0100 ActionController::RoutingError (No route matches [GET] "/assets/branding/logo_large.png"): lib/rack/chrome_frame.rb:39:in call' lib/unicorn_killer.rb:35:incall' Hope you guys can help me out. If you need anything else please let me know Thanks in advance, Matt

  Read the article

• Resealing windows XP stops PXE working

  - by zeocrash

  I'm trying to capture a drive image of a windows xp pro machine. I've gone through the steps and resealed the machine. When i try and network boot the PXE instantly gives the message "PXE-MOF" and ends. I have managed to get network boot to work on this machine whenever XP is not resealed. I have tried Multiple times to get PXE to work after resealing windows, but with no luck. As soon as i unseal it, PXE works every time. I know PXE is supposed to work independent of what's on the hard drive. Is there any way that resealing windows could cause PXE to stop working.

  Read the article

• How do I set up DNS for an intranet web site?

  - by BradyKelly

  I have a web site running on our local server, 'OBAMA'. In my hosts file on that server, I map engenxt.local to 127.0.0.1, so typing engenxt.local on that machine itself brings up the website. I would like other machines to access the site via domain name 'engenxt'. On a Windows Server 2008 R2 Standard server, where would I begin, where should I go, and where should I end? I know precious little about DNS, or rather precious nothing, but am a quick study, besides, that is why I'm asking how to do this here. Episode 2 When I run DNS as Ryan suggests, it says 'the server OBAMA is unavailable. Do I want to add it?' It adds it, and tells me to choose to 'Configure a DNS server' from the actions menu, but nearly all the actions in that menu are disabled.

  Read the article

• WD My Passport detected but not assigned a drive letter

  - by abel

  I have a WD My Passport external drive which used to work fine on my Win7 x64 box until recently. Since the past few days, windows would not detect my external drive. However, Storage under disk management lists my external drive(which means windows can see my drive) but without a drive letter. I am not able to assign a drive letter(the option is grayed out). I installed EASUS Partition Manager which allows me to assign a drive letter, but fails to do so when I apply to save changes. What do i do to assign a drive letter to the drive or make windows to detect it as of old? The external drive works well on Win7 x32(dual boot, same system) and win7 x64 on another box. Update: cant comment from Opera Mini 6 @zeke the drive works absolutely fine on other Win7 boxes and on the dual boot win7 on the same system.

  Read the article

• Win 2008 R2 terminal server and redirected printer queue security

  - by Ian

  I have a case where I need a non-priv account to be able to make a modification to the redirected printer. I know, its not advisable but we're not giving them access - changes will be made in code. So, following the docs (http://technet.microsoft.com/en-us/library/ee524015(WS.10).aspx) I modified the default security for new printer queues. This doesnt work though as windows doesn't seem to assign the privs you configure in the printer admin tool to redirected printer queues. As I test I added a non-priv test user to the default security tab in the printer admin tool (control panel - admin tools - printer admin. I assigned it all privs (its a test) and logged the user into the terminal server. The redirected printers duely appeared as usual. However if I open the printer properties - security tab, the user appears in the list of accounts/groups but the options I selected (all privs) are not set. Instead the user special privs box is marked and when I click on 'advanced options' and view them, there is nothing marked. So, something is clearing these options.... the question is, why and how can I convince it not to? Ian

  Read the article

• Linux not picking up new partition correctly on emc pseudo device

  - by James

  Hi We have a database server running oracle rac. We were recently running out of space on the main LUN that it is attached to. I created a new 100GB LUN and concatenated this onto the existing LUN creating a new MetaLUN. After some messing I managed to get linux to recognise the new space. I then created a new partition in on the pseudo device, to use the new space. Previously when I have done this on other system the next step is to create an ASM disk on the new partition and add this disk to the oracle disk group. This however fails. I am aware of various issues with ASM and powerpath, but I don't think this is the issue here. As on while investigating the issue I discovered that one of the underlying logical device is not reflecting the size change. See below; Powermt displays all of the underlying logical units [root@XXXXX~]# powermt display dev=emcpowerd Pseudo name=emcpowerd CLARiiON ID=CKM00091500009 [VFRAC2] Logical device ID=6006016030312200787502866C65DE11 [LUN 30] state=alive; policy=CLAROpt; priority=0; queued-IOs=0 Owner: default=SP A, current=SP A Array failover mode: 1 ============================================================================== ---------------- Host --------------- - Stor - -- I/O Path - -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 3 qla2xxx sde SP A0 active alive 0 0 3 qla2xxx sdj SP B0 active alive 0 0 4 qla2xxx sdo SP A1 active alive 0 0 4 qla2xxx sdt SP B1 active alive 0 0 Fdisk on the pseudo device shows correct space. [root@XXXXX ~]# fdisk -l /dev/emcpowerd Disk /dev/emcpowerd: 429.4 GB, 429496729600 bytes 255 heads, 63 sectors/track, 52216 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/emcpowerd1 1 39162 314568733+ 83 Linux /dev/emcpowerd2 39163 52216 104856255 83 Linux fdisk on one of the logical units is wrong [root@XXXXX~]# fdisk -l /dev/sde Disk /dev/sde: 322.1 GB, 322122547200 bytes 255 heads, 63 sectors/track, 39162 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sde1 1 39162 314568733+ 83 Linux /dev/sde2 39163 52216 104856255 83 Linux fdisk on the rest of the units is fine [root@XXXXX ~]# fdisk -l /dev/sdj Disk /dev/sdj: 429.4 GB, 429496729600 bytes 255 heads, 63 sectors/track, 52216 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sdj1 1 39162 314568733+ 83 Linux /dev/sdj2 39163 52216 104856255 83 Linux Also when I created the the partition linux did not create the any entries in the /dev directory for the second partition so I created these manually [root@XXXXX dev]# mknod sde2 b 8 66 [root@XXXXX dev]# ls -al sd[ejot]? brw-r----- 1 root disk 8, 65 Dec 29 14:20 sde1 brw-r--r-- 1 root disk 8, 66 Apr 8 20:31 sde2 brw-r----- 1 root disk 8, 145 Dec 29 14:19 sdj1 brw-r--r-- 1 root disk 8, 146 Apr 8 20:33 sdj2 brw-r----- 1 root disk 8, 225 Apr 6 23:12 sdo1 brw-r--r-- 1 root disk 8, 226 Apr 8 20:33 sdo2 brw-r----- 1 root disk 65, 49 Dec 29 14:19 sdt1 brw-r--r-- 1 root disk 65, 50 Apr 8 20:33 sdt2 This is a production server that we cannot easily reboot. Any ideas would be much appreciated. J

  Read the article

• Resizing Partitions on Live RHEL/cPanel Server

  - by Timothy R. Butler

  I've resized many partitions over the years on Linux, Windows and Mac OS X -- but always using a GUI. However, the time has come where the preset partition sizes my data center placed on my server aren't the right sizes and I need to resize a production server's disks. I could fiddle with it and probably do OK, but given that it is a production server, I wanted to get some advice about the right way to do this. I do have KVM over IP access, so if it is best to take the server offline and boot off a rescue partition, I can do that. root [/var/lib/mysql]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda2 9.9G 2.1G 7.3G 23% / tmpfs 7.8G 0 7.8G 0% /dev/shm /dev/sda1 99M 77M 18M 82% /boot /dev/sda8 884G 463G 376G 56% /home /dev/sda3 9.9G 8.0G 1.5G 85% /usr /dev/sda5 9.9G 9.1G 308M 97% /var /usr/tmpDSK 2.0G 38M 1.8G 3% /tmp As you can see /var and /usr are quite close to being full and I've actually had to symlink some logs on /usr to directories in /home to balance things out. What I would like to do is to add 6-10 GB each to /usr and /var, presumably taking the space from /home. As I think about how the disk is arranged, the best thought I've come up with is to reduce /home by 16 GB, say, and move /var to the spot freed up, then allocating /var's space to /usr. However, that would put /var at the far end of the disk, which seems less than idea, given that MySQL has all of its data on that partition. I'd love to take the space out of the closer end of /usr, but I assume that would take a very arduous (and perhaps risky) process of moving all of the data in /usr around. I seem to recall having such a process fail for me on a computer in the past. The other option might be to merge / and /usr since / is underutilized, though I'm not sure if that's a good idea. Do you have any suggestions both on the best reallocation plan and the commands to use to accomplish it? UPDATE: I should add -- here's the partition table. There's one unused partition, which, if memory serves, was the original tmp location before I created a tmp image: Name Flags Part Type FS Type [Label] Size (MB) ------------------------------------------------------------------------------ Unusable 1.05* sda1 Boot Primary Linux ext2 106.96* sda2 Primary Linux ext3 10737.42* sda3 Primary Linux ext3 10737.42* sda5 NC Logical Linux ext3 10738.47* sda6 NC Logical Linux swap / Solaris 2148.54* sda7 NC Logical Linux ext3 1074.80* sda8 NC Logical Linux ext3 964098.53*

  Read the article

• Creating a USB stick for installing centos 6.x using DVD1 and DVD2 iso files

  - by user250563

  First, we create 2 partitions on the USB stick that is let's say 16GB. first partition is let's say only 1GB and the second partition is the rest of what is available. after we "w" write the changes, the USB now has 2 partitions. 1 is 1GB 1 is more than 14GB so , we have... sdb1 and sdb2 now. now we need to turn these partitions into filesystems some say i should run these commands after those procedures. mkfs.vfat -F 32 /dev/sdb1 mkfs.ext3 /dev/sdb2 but some web pages recommend using: mkfs.vfat -n BOOT /dev/sdb1 mkfs.ext2 -m 0 -b 4096 -L DATA /dev/sdb2 which is it? so let's say the DVDs are called: CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso so we make a directory: mkdir -p /mnt/dvd1 and then mount it: mount -o loop CentOS-6.4-x86_64-bin-DVD1.iso /mnt/dvd1 and i suppose we don't make a directory for dvd2 and we don't have to mount it ? at this point i do not know what should be done. but i think this step might be next: we make the USB bootable by finding the file named mbr.bin and then moving it to there via these commnad. dd conv=notrunc bs=440 count=1 if=/usr/lib/syslinux/mbr.bin of=/dev/sdb parted /dev/sdb set 1 boot on in other words we are "dd-ing it to 'sdb' not sdb1' or 'sdb2'. and then we use parted to set the boot to on for sdb so far everything looks good? here is the confusing parts.. how exactly do i move these iso files to the usb drive? EVERYTHING BELOW IS A GUESS. so at this point i should copy the folder /mnt/dvd1/isolinux to usb's sdb1 or sdb2 ? rename it to syslinux ? and then inside this syslinux folder there will be a file called... isolinux.cfg ? which should be renamed to syslinux.cfg ? and then copy the contents of /mnt/dvd1/images/* to USB's sdb2 ? but i think i am also suppose to copy and paste the both CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso somewhere into this USB's sdb2 partition, correct ? almost like a drag and drop kind of a thing? or do they go into any folders ? centos' own web site has some instructions but those instructions do not work. http://wiki.centos.org/HowTos/InstallFromUSBkey i once got this working but things got ruined, i have to do it again and this time take notes.

  Read the article

< Previous Page | 345 346 347 348 349 350 351 352 353 354 355 356  | Next Page >