Search Results

Search found 2446 results on 98 pages for 'nick martin'.

Page 35/98 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

  • How to charge an iPhone on a Windows PC without Installing iTunes

    - by Martin Hollingsworth
    I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

    Read the article

  • How to set up a PC which can be booted from Linux AND Windows?

    - by Martin
    Our PC was running Windows XP up to know. It has become incredibly slow and I'm considering switching to Linux (Ubuntu?!) as a fresh OS. However, there are some applications we rarely use which run only on Windows and I also want to have the possibility to easily go back to the old system, if I should find during testing linux, that anything is missing or not available. So the idea is to install Linux on a new (second) hard drive and use the existing Windows XP from a virtual machine (converted by Paragon Drive Backup) in the transition time. We have a lot of data on the PC, tens of GBs of Photos (managed by Picasa), ... My questions: What could be the best way to setup the new hard drive? (Partitions) I assume that I can not access the Linux data from Windows but I could access (read/write) windows drives from Linux? Does anyone know good tutorials for this use case? What other things might I have to consider for transition Windows-Linux?

    Read the article

  • What ports does Management Studio use to connect to SQL Server (2005)

    - by Martin
    I have SQL Server 2005 operating on a remotely hosted server and wish to access it from my own machine using management studio The firewall on the remote server is allready setup to allow all traffic from my external IP - and that works great. However I have a load balancing router that has a second line attached to it - unfortunatly the second line has a dynamic external IP. I need to therefore set up a rule in the router to always send data from Management studio on the first line - but I need to know the port numbers. Can you advise?

    Read the article

  • Windows service fails to start with local user until password is entered again in logon tab

    - by Nick
    Basically we have a service where we use a local account as its logon. it has all the proper permissions, and everything is working fine, service starts and runs and all is good. Then one day, after rebooting, the service fails to start. Logs show incorrect password. Our technicians resolve the issue by simply retyping the password into the "Log On" tab from the services.msc. Unfortunately we have not been able to root cause. I suspect that the password that is stored for the service is lost somehow. Does anyone know where the password hash might be stored so we can check it? The only activities that seem to be possibly related are patching with Microsoft security patches, but we have multiple servers running the same service, and we have never seen more than one at a time, and its usually a different one each time when this occurrs. I believe this to be the same issue as this: Windows service fails to start with custom user until started once with local user But i was unable to add comments, and its really old.

    Read the article

  • Best technique for reusing a Windows system image across configurations

    - by Martin Wiboe
    We are a small company that provides solutions for ventilation systems. Part of the solution is a "controller" which communicates with the ventilation equipment. These controllers are simply Dell computers that come with our Windows 7 system image on them and sometimes some special hardware. We typically do a batch of 10 controllers at a time. We have been using Norton Ghost to apply the system image, but this process breaks because Dell changes the system configuration often, and our Windows image now does not contain the correct drivers. This is especially a problem when they change the RAID controller. To improve this, I see 2 options: use some kind of virtualization and install a hypervisor on each PC. This would solve the driver problem, but probably cause trouble with our special hardware. use some method of adding the proper drivers to our Windows image in offline mode. I haven't got much experience in either of these approaches. How would you solve our problem?

    Read the article

  • Excel or Access: how to group several lines in a table and insert contents in columns? ("split column")

    - by Martin
    I have a table containing data of sold products (shown in the example on the left): Columns: Number of the order Product Name Attribute - specifies what is given in the following field "value", e. g. Customer Name or Product Variant Value - is the value of the Attribute Count - is the number of products of this variant sold in the order That means: Product B has 2 variants "c" and "d" Note that in Order 1 Product B was sold in Variant d only, because the letter "N" in field "D4" means "none". Note, that in OrdnerNo 3 Product B was sold only in Variant c, because for Variant d field "D9" is "N"!! This is confusing, but it is the structure of the original data (which I can not change). I need a way to convert the table on the left in a table like that on the right: one line for each product type Order Number Product Name Customer Name Count (number of products sold in this order) Variant - this is the problem, as it has to be filled with the So all rows with the same OrderNo and same product have to be grouped in to one, and I hope it is clear what I need. I tried to do it with Pivot Tables, but that fails, as the Count is always in each line, no matter if it has Value "N" or not and for the products without variants there is only one line for each order, however for products with variants there are several... So how could I create the right table with a VBA macro in MS Excel or maybe there is a trick in MS Access to do it directly or with an SQL query?

    Read the article

  • Access to self created torrent on public tracker

    - by Nick
    Not sure if this is the right site to ask this, but here it goes: Let's say I'd like to share a couple of private files with a few friends. The size of these are quite large, so I've figured the best route to distribute these is via torrent. So, on my home PC I create a torrent and start seeding and announce to a public tracker like openbittorrent and publicbt. Now, both of those are public trackers, but they don't seem to have anyway of searching through what is actually being tracked. If I'm only passing around the torrent file to a few friends, whats the chances that someone else will 'randomly' come across the torrent via the public tracker and start leeching?

    Read the article

  • Proxy Error 502 "Reason: Error reading from remote server" with Apache 2.2.3 (Debian) mod_proxy and Jetty 6.1.18

    - by Martin
    Apache is receiving requests at port :80 and proxying them to Jetty at port :8080 The proxy server received an invalid response from an upstream server The proxy server could not handle the request GET /. My dilemma: Everything works fine normally (fast requests, few seconds or few tens of seconds long requests are processed ok). Problems occur when request processing takes long (few minutes?). If I issue request instead directly to Jetty at port :8080 the request is processed OK. So problem is likely to sit somewhere between Apache and Jetty where I am using mod_proxy. How to solve this? I have already tried some "tricks" related to KeepAlive settings, without luck. Here is my current configuration, any suggestions? #keepalive Off ## I have tried this, does not help #SetEnv force-proxy-request-1.0 1 ## I have tried this, does not help #SetEnv proxy-nokeepalive 1 ## I have tried this, does not help #SetEnv proxy-initial-not-pooled 1 ## I have tried this, does not help KeepAlive 20 ## I have tried this, does not help KeepAliveTimeout 600 ## I have tried this, does not help ProxyTimeout 600 ## I have tried this, does not help NameVirtualHost *:80 <VirtualHost _default_:80> ServerAdmin [email protected] ServerName www.mydomain.fi ServerAlias mydomain.fi mydomain.com mydomain www.mydomain.com ProxyRequests On ProxyVia On <Proxy *> Order deny,allow Allow from all </Proxy> ProxyRequests Off ProxyPass / http://www.mydomain.fi:8080/ retry=1 acquire=3000 timeout=600 ProxyPassReverse / http://www.mydomain.fi:8080/ RewriteEngine On RewriteCond %{SERVER_NAME} !^www\.mydomain\.fi RewriteRule /(.*) http://www.mydomain.fi/$1 [redirect=301L] ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On </VirtualHost> Here is also the debug log from a failing request: 74.125.43.99 - - [29/Sep/2010:20:15:40 +0300] "GET /?wicket:bookmarkablePage=newWindow:com.mydomain.view.application.reports.SaveReportPage HTTP/1.1" 502 355 "https://www.mydomain.fi/?wicket:interface=:0:2:::" "Mozilla/5.0 (Windows; U; Windows NT 6.1; fi; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10" [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: error reading status line from remote server www.mydomain.fi, referer: https://www.mydomain.fi/?wicket:interface=:0:2::: [Wed Sep 29 20:20:40 2010] [error] [client 74.125.43.99] proxy: Error reading from remote server returned by /, referer: https://www.mydomain.fi/?wicket:interface=:0:2:::

    Read the article

  • rsync osx to linux

    - by Nick
    I did a backup to a remote nfs folder with rsync, from a MAC to a Remote Debian. The final backup is 58GB less than the original. Rsync says that everything was OK, and nothing to update. Macintosh:/Volumes/Data1 root# du -sh Produccion/ 319G Produccion/ root@Disketera:/mnt/soho_storage/samba/shares# du -sh Produccion/ 260G Produccion/ can I trust in rsync? I'm using rsync -av --stats /Volumes/Data1/Produccion/ /mnt/red/ (/mnt/red is my samba mountpoint) Some differents folders root@Disketera:/mnt/soho_storage/samba/shares/Produccion/tiposok# du -sh * 0 IndoSanBol 0 IndoSans-Bold 0 IndoSans-Italic 0 IndoSans-Light 0 IndoSans-Regular 40K PalatinoLTStd-Black.otf 40K PalatinoLTStd-BlackItalic.otf 40K PalatinoLTStd-Bold.otf 44K PalatinoLTStd-BoldItalic.otf 44K PalatinoLTStd-Italic.otf 40K PalatinoLTStd-Light.otf 40K PalatinoLTStd-LightItalic.otf 40K PalatinoLTStd-Medium.otf 40K PalatinoLTStd-MediumItalic.otf 56K PalatinoLTStd-Roman.otf 12K TCL IndoSans_mac Macintosh:/Volumes/Data1/Produccion/tiposok root# du -sh * 36K IndoSanBol 40K IndoSans-Bold 36K IndoSans-Italic 36K IndoSans-Light 36K IndoSans-Regular 40K PalatinoLTStd-Black.otf 40K PalatinoLTStd-BlackItalic.otf 40K PalatinoLTStd-Bold.otf 44K PalatinoLTStd-BoldItalic.otf 44K PalatinoLTStd-Italic.otf 40K PalatinoLTStd-Light.otf 40K PalatinoLTStd-LightItalic.otf 40K PalatinoLTStd-Medium.otf 40K PalatinoLTStd-MediumItalic.otf 56K PalatinoLTStd-Roman.otf 160K TCL IndoSans_mac

    Read the article

  • Remote Desktop Software - TeamViewer comparison?

    - by Martin
    Preliminary Note: After reading what I wrote below, I would like to stress that this ain't a TeamViewer ad. It's just that all other tools that I checkked online seem to miss one feature or the other. :-) OK, so I'm currently trying to get a picture of available solutions for remote desktop software. I have found (through personal usage) that TeamViewer pretty much ticks all boxes that I personally would want from any remoting tool. (Specifically it's setup is amazingly trivial.) It supports a wide range of platforms and it's even free for private use, so I'm really quite OK with it. I would be interested if anyone knows of other tools that ticks as many boxes as TeamViewer seems to do.

    Read the article

  • IPtables Traffic Quota - up and down

    - by Nick
    I've been trying to set up traffic quotas for users on a shared server and i believe [with my limited knowledge] that iptables --quota and ports which have been selected for each user [--dport] is the way to do this... iptables -A OUTPUT --dport 1,2,3,4... --quota 123412341234 -j ACCEPT iptables -A OUTPUT --dport 1,2,3,4... -j DROP I think something like this would work to limit the traffic [and reset every month] but its only for traffic going out. Is there something I could do to combine -A OUTPUT and -A INPUT into one quota? Or, is there a different method I could use to achieve the same thing more efficiently? OS is debian squeeze Thanks.

    Read the article

  • Directly printing to remote CUPS/IPP server on Snow Leopard

    - by Martin v. Löwis
    I need to use Kerberos authentication when printing from my OSX machine, however, the machine itself does not have a service account in active directory, so the KDC will not issue a delegation ticket for the local CUPS installation. I think printing could work if the printing framework would directly print to the network CUPS server (or even to the Windows print server), bypassing the local CUPS. Is it possible to setup printing so that it directly accesses the remote print server? (asking for a service ticket for that server would succeed)

    Read the article

  • Can not boot windows XP from cloned hard disk - what can I do?

    - by Martin
    My configuration: a PC (some years old) with MSI K8N-Neo-4F Motherboard, 1 GB RAM. Disk 1 (Maxtor, SATA II, 250 GB): 2 Partitions, on Partition 1 (48 GB): Windows XP Professional (NTFS) on Partition 2 (190 GB): data (NTFS) I wanted to have a larger and faster disk (the PC is incredibly slow and permanently the disk is rattling when I try to open an application or during Windows startup), so I took Disk 2 (Seagate, Sata II, 500 GB), installed in the PC, created at first a 400 GB-partition at the end of the disk and cloned the data to it, which worked well Installed a swap partition and a partition for Ubuntu Linux 12.10 on the first "part" of the disk so I was able to boot Linux and the old Windows XP with the Linux "System selection" at startup. Now I wanted to move Windows XP to the new disk, deleted the Linux partitions cloned Windows XP to the new disk (with free tools - EASESUS), left both disks in the PC and tried to select the new hard drive during boot as boot partition. This did not work, the PC refused to boot from this second disk. I tried many things like making the boot partition on the 2nd drive "active" in the Windows System Preferences modifying the boot.ini file to boot from the second disk - tried to boot from it, but ended with an error message stating that it was not possible to boot from this disk because of a hardware failure or something else or so removing the original disk and plugging the new one on the same SATA port as the original one - also booting failed with an error message repairing the MBR by booting into recovery mode from the Windows XP Installation CD-ROM, selecting the second disk and doing "FIXMBR" which said that everything was fine with the MBR. after that at least the PC tried to boot from the newer disk and then startup was hanging during the blue screen with the Windows Logo.... no luck. ... deleting the cloned partition and cloning again - this time with Macrium Reflect Free version... - no success during booting. I tried a lot of things with no success, so I wonder what I am doing wrong?! What could I do to successfully clone my Win XP partition to replace the original disk by a larger one which is bootable.

    Read the article

  • Is there a general method to determine if a laptop can support 2x external monitors?

    - by Nick Alexeev
    Question: Is there a general method, which would let me determine if a laptop can support 2x external monitors? Context: I’m shopping for a laptop, which would support my 2 main modes of operation. In CAD mode, I sit at my desk and do many hours of work with OrCAD, Altium, SoligWorks. I’d like to have 2x external monitors. (If needed, monitors can be connected through dock station.) In field mode, I still need to run CAD packages, but only to look-up and tweak things occasionally. Field mode happens in vanilla indoor environments, so ruggedness and ingress protection are not needed. It would be nice if the laptop had a small footprint, like a 13” laptop perhaps. At the same time, weight and thickness of the laptop are not a problem for me. Of course, I also wonder if this is realistic at all. Any suggestion, insight or reference is really appreciated!

    Read the article

  • Discover the public ip of a network without being connected

    - by Martin Trigaux
    Let say, I'm next to a network and can see the traffic (with airodump or similar tool) but can not decipher it (because I am not connected on the network). Is it possible to discover the public ip address of the network ? I know the MAC address of the users connected on the network but do I know the one of the router ? If yes, maybe there is a way to do the matching. I know IP addresses are not forever but some addresses are static and never change. Maybe there is a database of MAC address having recorded that. Google has a database that match MAC address and geographical coordinates so why not with IP addresses ? Other idea, if I know where am I, I can maybe guess the IP range used in the city by the ISP (is it findable ?) and then try to "ping" each IP on the range (if it is a /24, it's possible, even /16 maybe). Will I get some information like the MAC of the box or see some traffic on the network ? These are two ideas I had. I don't know if they are doable, certainly not perfect. Do you think of some others ? By trying several methods, maybe I can get a guess with a bit of luck. Thank you

    Read the article

  • How to access XAMPP virtual hosts from iPad on local network?

    - by martin's
    Using XAMPP on one machine. Multiple virtual hosts defined. One per project. Format is .local For example: apple.local microsoft.local client-site.local our-own-internal-site.local All works perfectly from that one machine. I now want to have other systems within the network access the various sites. The main reason for wanting to do this is to be able to test site functionality and layout from mobile devices without having to upload partial work to public servers. I can access the main XAMPP default site by simply entering the IP address of the XAMPP machine in, say, Safari on an iPad. However, there is no way to reach .local that I can see. Would this entail setting up a DNS server within the network? We have a mixture of Windows and Mac machines. No Linux. The XAMPP machine is Vista 64. I don't want real external internet access to be affected in any way, just ".local" pointed to the XAMPP machine if that makes sense.

    Read the article

  • Unable to FTP, any ideas?

    - by Nick
    I'm using Windows Server 2003. I have the FTP services installed, router set to DMZ, and currently Anonymous logins allowed. (I know, security risk, but there's nothing important on there and not worried at the moment) So here's the thing... I can ftp to my computer, list directory, get files etc, BUT only if I'm using the command prompt. If I try to log in using IE or any FTP client it's just timing out. I've tried: username@ipaddress ipaddress username:password@ipaddress and not able to get any of them to work. Anyone have any ideas? Thanks!!!

    Read the article

  • Use autocomplete in dropdown cells with Excel 2007?

    - by Martin
    I want to make a survey with Excel and I therefore have defined the cells for the answers as a dropdown cell which only accepts answers from a certain list, e. g.: The two Lists List1 and List2 (yellow cells) are the possible answers for the questions in Block 1.x resp. 2.x (blue) . There might be a block 4 with more questions, which again use List1 for their possible answers. My problem is: I'd like to be able to use the autocompleate feature to fill in the blue cells with the dropdown menu, so that the user only types 5 and it automatically expands to "5: extremely important" or "5: extremely difficult". According to my research on the www, this should be possible if I add the list with possible answers directly above the cells where autocomplete should work (I did this with the green helper cells which could be hidden) . But I have to enter at least 4 characters 5: e to get the autocompleted suggestion. Is there a way to make autocomplete already replace a "5" by the corresponding valid term? As the survey file shall be distributed to a lot of people "outside", I can not use VBA magic because it may be blocked on their computer and might not work. EDIT: it seems to have to do with the numbers I use: If I'd start my List items with A, B, C instead of 1, 2, 3, it would work perfectly. Excel seems to ignore the pure numbers when they are entered and does not try to autocomplete them.. is there a workaround? (I hope it is clear what I want, it seems a little difficult to explain.)

    Read the article

  • How to install Windows 7 on Acer Aspire iDea 500?

    - by Martin R-L
    I've got a Windows 7 Ultimate 32-bit from MSDN Subscriber Downloads. The downloaded ISO boots fine from both a USB pen drive and a DVD on other computers. On the Acer it doesn't boot. The Acer iDea 500 can boot, and install, Windows XP Mediacenter from a DVD with slipstreamed SATA drives on it. Also, all kinds of Linux distros works perfectly fine on the iDea 500. I wouldn't mind using Mythbuntu instead of Windows 7 Ultimate, but it doesn't work very well.

    Read the article

  • Google Chrome doesn't stay logged in to Google sites when using pinned tabs

    - by Nick T
    Despite checking "stay logged in" or the like on Gmail or Docs, Chrome refuses to do so when I close and re-open it with Google sites pinned. If they're not pinned, it works fine. The "Clear cookies and other site and plug-in data when I close my browser" checkbox in the settings is not checked, and I don't have any cookie exceptions. All settings are defaults. Nor is the incognito mode being used. This occurs on all my computers using Chrome. I have deleted my cookies file (%userprofile%\AppData\Local\Google\Chrome\User Data\Default\Cookies) with no effect (other than losing the logins that ordinarly work fine). Of note is that when I relaunch Chrome with Gmail pinned and it asks me to log in, doing so once will fail (does nothing; no errors), then it will work on the second attempt. If I refresh the window before doing so, it will work on the first attempt.

    Read the article

  • Which hardware to VM ratio for Build-Server virtualization?

    - by Martin
    Let's start with saying that I'm a total noob wrt. to server virtualization. That is, I use VMs often during development, but they're simple desktop machine things for me. Now to my problem: We have two (physical) build servers, one master, one slave running Jenkins to do daily tasks and build (Visual C++ Builds) our release packages for our software. As such these machines are critical to our company, because we do lot's releases and without a controlled environment to create them, we can't ship fixes. (And currently there's no proper backup of these machines in place, because they do not hold any data as such - it just would be a major pain to setup them again should they go bust. (But setting up backup that I'd know would work in case of HW failure would even be more pain, so we have skipped that until now.)) Therefore (and for scaling purposes) we would like to go virtual with these machines. Outsourcing to the cloud is not an option, not at all, so we'll have to use on-premises hardware and VM hosts. Each Build-Server (master or slave) is a fully configured (installs, licenses, shares in case of the master, ...) Windows Server box. I would now ideally like to just convert the (two) existing physical nodes to VM images and run them. Later add more VM slave instances as clones of the existing ones. And here begin my questions: Should I go for one VM per one hardware-box or should I go for something where a single hardware runs multiple VMs? That would mean a single point of failure hardware wise and doesn't seem like a good idea ... or?? Since we're doing C++ compilation with Visual Studio, I assume that during a build the hardware (processor cores + disk) will be fully utilized, so going with more than one build-node per hardware doesn't seem to make much sense?? Wrt. to hardware options, does it make any difference which VM software we use (VMWare, MS, Virtualbox, ... ?) (We're using Windows exclusively for our builds.) Regarding budget: We have a normal small company (20 developers) budget for this. ;-) That is, if it's going to cost a few k$ it's going to cost. If it's free - the better. I strongly prefer solutions where there's no multi-k$ maintenance costs per year.

    Read the article

  • Can't install Hyper-V in Windows 8 Pro. Causes boot loop, pain & suffering

    - by Nick
    Hardware: Intel i7 2600K (not overclocked, SLAT compatible, virt. features enabled in bios) Asus Maximus IV Extreme-Z (Z68) 16Gb RAM 256Gb SSD Other non-trivial working parts Adding Hyper-V is causing a boot loop resulting in an attempt at automatic repair by Windows 8 after the second or third loop: I'm trying to get the Windows Phone 8 SDK installed and I've narrowed down my troubles to the Hyper-V feature in Win8. This is required to run the WP8 emulator and there are no install options to omit this feature. My first attempt completely borked the OS as I did not have a recent restore point or system image, so I did a completely clean install and made plenty of backups/restore points. I skipped the SDK install and went straight for the windows feature add-on for Hyper-V. This confirmed that Hyper-V is the issue as the same behavior resulted. I cannot find any hint in the Event Logs. Cancelling automatic recovery causes the same behavior to repeat. I don't have any other VM products installed. My only recourse is to use a restore point, try something else, install it again, and see what happens. No luck so far. I'm on my 10th attempt here. Any help would be much appreciated.

    Read the article

  • Wrong chrome full screen resolution with multiple displays

    - by Martin
    I am using Google Chrome on Windows 7 64bit with two displays. The displays have different resolutions and aspect-ratios. My problem is best visible when playing back full-screen videos from a flash player inside chrome (but it is not flash related). The maximum size is calculated from the primary displays' resolution, even when the relevant window is maximised on the second screen. The problem is also visible on websites that set the width to 100%. The 100% then apply to the primary display, even when the window is opened on the secondary display. Are there any known solutions to this problem? I am observing it since many Chrome versions, do not know if it has been ever correct.

    Read the article

  • Connecting to a remote mysql server from a windows machine (XP)

    - by Samuel Martin
    I am trying to connect to mysql server which is installed on my home pc from another pc. I allowed all connection in mysql configuration. There's no firewall blocking on the pc I am trying to connect from. I used the command- mysql -h Some.Host.IP -u SomeUser -p SomePassword I am getting- ERROR 2003 (HY000): Can't connect to MySQL server on 'Some.Host.IP' (10060) I can connect through php!! What's the problem? How do I solve it?

    Read the article

  • how do I make two internal networks speak with one another

    - by Nick M.
    I have two internal networks that are connected to each other 10.10.10.1 and 10.10.11.1 I am trying to make devices on the 10.10.10.1 network be able to access the devices on the 10.10.11.1 network and vice versa. My questions is what is the networking term used to "bridge/route" traffic between the two networks making each other available to one another. Also what is the process in getting this going using iptables?

    Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >