Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 350/1359 | < Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >

  • can't see myself in Skype video call

    - by seb
    I'm running 12.04 and I've installed skype via the software centre. As with 11.10 everything works fine with 12.04 as well. There is only one thing that does not work. I can't see myself in Skype video calls. The video call works fine, I can see the other side the other side can see me. Buid in microphone works. If I click on 'show myself' during the video call nothing happens. I know that it works on Ubuntu in general as I had it working a while back on a different machine (Xubuntu 11.04). Could that be related to the GPU? I'm now on a intel/nvidia one. Any Ideas where I can hunt for some options or tweaking?

    Read the article

  • How do I copy an existing hard disc to a new one so I can boot off the new disc?

    - by Brian Hooper
    I currently have a failing hard drive which is the only hard drive in the machine. I have just bought a new hard drive to replace it, and my plan is to copy the contents of the old drive onto the new one, and then replace the old drive in the machine with the new one. I presumably can't just copy the whole directory structure (or can I)? What do I need to do to manage this, assuming it is possible? Is there a utility to do this for me? (The old drive is hopefully good for a few more hours.) (I hope by this means to keep all the software and configuration files as they are, to avoid having to re-install everything. Can that be done?)

    Read the article

  • Order in which passphrase is asked for encrypted volumes

    - by Lars Kotthoff
    I have installed 12.10 on a machine with two disks. The root partition is on one disk, the swap partition on the other. Both disks are encrypted and I have added the corresponding entries to /etc/crypttab. During boot, it asks for the passphrase for the disk with the root filesystem. Then it continues booting and gets to the login screen before I get a chance to enter the passphrase for the other disk. After logging in, I verified that it was actually waiting for me to enter the passphrase for that second partition (askpass process is running). But at that point, I have no way of entering the passphrase anymore. The manpage for crypttab suggests that the order in which the volumes are specified matters, so I changed it to have the swap disk first. I updated the initramfs and grub afterwards, but it didn't make any difference. How can I specify the order in which the encrypted partitions are unlocked? I'm looking for a solution that either asks for the swap passphrase first or tells the system to wait until all encrypted partitions are unlocked before displaying the login screen.

    Read the article

  • What is the difference between sudo X and running X as root?

    - by Raffael
    My question is asking regarding a specific observation that I would like to understand. I just tried to install the package rJava in R and failed even though I prefaced the installation as suggested by the manual with: sudo R CMD javareconf Then I came across this comment: Using sudo and running as root are not exactly the same thing. – Jon7 Desparate as I was I tried it: sudo su R CMD javareconf And to my surprise I suddenly could install that package. Sorry for the lenghty introduction but I wanted to give you a context to prevent answers like here. The question does not aim at specifically the described observation - rather at those "things" in general on Ubuntu. My question is: How could this be possible? What is the difference between sudo X and runnding X as root?

    Read the article

  • How to stop gecko-mediaplayer from buffering endlessly?

    - by mario
    I'm using the gecko-mediaplayer plugin (formerly "mplayerplug-in"). The totem plugin was not always working correctly with Opera, and I'm actually depending on the [Copy URL] feature of gecko-mediaplayer. However that plugin does some inept buffering of videos. It seems to default to 20% caching regardless of what you set in the preferences window. This is quite annoying for big video files. But appearantly it's by design http://groups.google.com/group/gecko-mediaplayer/browse_thread/thread/b7f0f5a3cedc8979 The Gentoo forums listed some workaround http://forums.gentoo.org/viewtopic-t-816690.html - but ~/.config/gecko-mediaplayer/gecko-mediaplayer.conf is not working in the Ubuntu version. Does anyone know the actual way to configure the cache= size. Which is the real configuration filename under Ubuntu?

    Read the article

  • Q-Tec Webcam 100 (093a:2460) video quality is horrible at best

    - by Sir Emeth
    I just bought a new usb webcam for my desktop setup of Ubuntu Natty Narwhal. I plugged it in, started up Cheese, and saw my smiling face. But it was green and lined, very poor quality overall. I am skeptical that this is due to a poor quality webcam. :P I tried it in Skype, Google+, and Gchat, but all of those showed only a black screen. They recognized the webcam as present, but showed no stream from it. Kamoso showed a black screen as well, and Camorama had even poorer quality than Cheese. Here are the details for the webcam from lsusb: Bus 001 Device 005: ID 093a:2460 Pixart Imaging, Inc. Q-TEC WEBCAM 100 Am I missing a driver, or are there settings somewhere I need to tweak?

    Read the article

  • Can't boot from liveUSB when trying to install it alongside Windows 7

    - by ali
    I'm very noob at Linux and installing techniques. I want to install 12.04 from bootable usb flash alongside Windows 7 (also tried live CD but not working) but computer is not booting from USB flash or LIVE-CD and boots windows 7 (Acer Aspire 4750g) and of course I have set the BIOS priority in the right way. There is one important point to tell that I have installed Fedora 16 on my laptop successfully and now I have it on my system. When I was trying to install Fedora I got some error and searched about it and got this point that I should delete a .efi file and then installation went right. In this case , what should I do to solve the problem? (I also don't need my Fedora anymore).

    Read the article

  • apt-get upgrade stuck at the same package

    - by decibyte
    Current status I've started to suspect this is not an Ubuntu issue, but related to the internet connection here at my work. Until I'm sure, Im leaving my question below: Original question I'm stuck, can't upgrade my system. Running sudo apt-get upgrade gives me the following: mmm@alalunga:~$ sudo apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: ginn libgrip0 linux-generic-pae linux-headers-generic-pae linux-image-generic-pae The following packages will be upgraded: apport apport-gtk bind9-host build-essential dhcp3-client dhcp3-common dnsutils eog evince evince-common firefox firefox-branding firefox-dbg firefox-globalmenu firefox-gnome-support firefox-locale-en gimp gimp-data gir1.2-totem-1.0 glib-networking glib-networking-common glib-networking-services gnupg gpgv icedtea-6-jre-cacao icedtea-6-jre-jamvm icedtea-6-plugin icedtea-netx icedtea-netx-common icedtea-plugin isc-dhcp-client isc-dhcp-common libapache2-mod-php5 libart-2.0-2 libbind9-80 libdns81 libevince3-3 libgimp2.0 libisc83 libisccc80 libisccfg82 liblwres80 libssl-dev libssl-doc libssl1.0.0 libtotem0 linux-firmware linux-libc-dev openjdk-6-jre openjdk-6-jre-headless openjdk-6-jre-lib openssl php-pear php5-cli php5-common php5-curl php5-dev php5-gd php5-mysql php5-xsl policykit-1-gnome python-apport python-django python-gst0.10 python-problem-report resolvconf thunderbird thunderbird-globalmenu thunderbird-gnome-support totem totem-common totem-mozilla totem-plugins xserver-xorg-input-synaptics 74 upgraded, 0 newly installed, 0 to remove and 5 not upgraded. Need to get 317 MB/327 MB of archives. After this operation, 1.481 kB of additional disk space will be used. Do you want to continue [Y/n]? Get:1 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:2 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:3 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:4 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:5 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:6 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] Get:7 http://archive.ubuntu.com/ubuntu/ precise-updates/main openjdk-6-jre-headless i386 6b24-1.11.4-1ubuntu0.12.04.1 [27,3 MB] 9% [7 openjdk-6-jre-headless 27,3 MB/27,3 MB 100%] It keeps downloading the package openjdk-6-jre-headless, then does nothing for a while (hanging on what's the last line above), then download the package again. It's at its 13th download attempt at the moment of writing. The actual downloads seem to be done just fine, but whatever it does after downloading seems to be failing. I tried removing openjdk-6, but then it wanted to install openjdk-7 instead, with the same result, hanging at openjdk-7-jre-headless instead. I also tried changing servers from my local (Danish) to the main server. No luck. It's also keeping me from upgrading alle the other packages. What to do? Update After following instructions in the answer by @lpanebr, it is now stuck at the linux-firmware package. So, maybe it's a more general problem than being related to specific package(s)? Although it did download some packages without problems before getting stuck at linux-firmware.

    Read the article

  • Why is my system freezing when I switch users

    - by ZeroDivide
    Hello I've recently upgraded from 13.04 to 13.10 64bit. I'm running AMD graphics with the proprietary drivers. I have two user accounts. Mine(administrator) and my girlfriend's(standard) My girlfriend clicks "switch user" from my lock screen and logs in fine. I then try to click "switch user" from her lock screen and everything goes black. Then the monitor blinks on and off with just a single cursor. I have no way to access the terminal, the system is unresponsive and I have to hit the power button. Even ctrl + alt + f4 or ctrl + alt + t doesn't get me a terminal. When I press the power button on my system, it does start printing out the shutdown sequence on the monitor. Here is my .xsession-errors Script for ibus started at run_im. Script for auto started at run_im. Script for default started at run_im. Here is hers: init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd main process ended, respawning init: at-spi2-registryd respawning too fast, stopped init: logrotate main process (4726) killed by TERM signal init: upstart-dbus-session-bridge main process (4865) terminated with status 1 init: gnome-settings-daemon main process (4843) terminated with status 1 init: gnome-session main process (4852) terminated with status 1 init: unity-panel-service main process (4863) killed by KILL signal I found some advice in a forum to look for at-spi2-registryd in my system logs. Perhaps it will be useful. executing this: sudo grep -r at-spi2-registryd /var/log/* produces this: /var/log/lightdm/x-1-greeter.log:** (at-spi2-registryd:4384): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-1-greeter.log:** (at-spi2-registryd:4384): WARNING **: Unable to register client with session manager /var/log/lightdm/x-2-greeter.log.old:** (at-spi2-registryd:7447): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-2-greeter.log.old:** (at-spi2-registryd:7447): WARNING **: Unable to register client with session manager /var/log/lightdm/x-0-greeter.log:** (at-spi2-registryd:1378): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-0-greeter.log:** (at-spi2-registryd:1378): WARNING **: Unable to register client with session manager /var/log/lightdm/x-0-greeter.log.old:** (at-spi2-registryd:1357): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files /var/log/lightdm/x-0-greeter.log.old:** (at-spi2-registryd:1357): WARNING **: Unable to register client with session manager Any ideas what is going on?

    Read the article

  • I installed the Nautilus Actions Configuration utility but I don't have the action configuration menu option

    - by userman
    I am tyring to set up my trash to securely delete items and I am following the instructions on this page. http://techthrob.com/2010/07/07/adding-a-secure-delete-option-to-nautilus-file-manager-in-linux/ I installed the Nautilus Actions Configuration utility and according to the previously listed page a new action configuration menu option should have shown up in the Nautilus preferences menu. It didn't. Any help would be appreciated. Thanks!

    Read the article

  • How can I solve, error:unknown filesytem grub rescue>

    - by Benson
    I was previously using Win7 and had two partitions on my hard disk. After learning about Ubuntu I decide to remove Windows and install Ubuntu 11.10 instead. All my important files and documents are stored in my second partition. After successful installation, during restart I get the error : error: unknown filesystem grub rescue> Please help me to resolve the problem, and note that I don't want dual boot my machine.

    Read the article

  • WiFi connected to router, but no internet connection

    - by Quetzacotl
    I just got a new notebook, a ThinkPad Edge E530, and installed Ubuntu on it. I'm pretty new to Ubuntu. On the same laptop, running Windows 7, the Wi-Fi connection works fine. Ethernet connection works both on Win7 and on Ubuntu. Only Wi-Fi on Ubuntu does not work; it connects to the Wi-Fi access point but I don't have Internet access. My wireless card is Intel Centrino Wireless-N 2230. What can fix the problem? EDIT: ifconfig -a eth0 Link encap:Ethernet HWaddr b8:88:e3:30:72:34 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:163 errors:0 dropped:0 overruns:0 frame:0 TX packets:163 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:10124 (10.1 KB) TX bytes:10124 (10.1 KB) usb0 Link encap:Ethernet HWaddr 02:15:e0:ec:01:00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 68:5d:43:43:71:e1 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::6a5d:43ff:fe43:71e1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:40 errors:0 dropped:0 overruns:0 frame:0 TX packets:220 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2801 (2.8 KB) TX bytes:26230 (26.2 KB) route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 127.0.0.1 iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"SATELITE" Mode:Managed Frequency:2.462 GHz Access Point: 00:1F:1F:8D:CC:08 Bit Rate=1 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=60/70 Signal level=-50 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:93 Invalid misc:243 Missed beacon:0 eth0 no wireless extensions.

    Read the article

  • Getting xsession-errors after Unity Lens install

    - by David
    I apologize in advance if I am leaving something out here. Please let me know what additional info is required, and i will be happy to post it. Can you tell me what these error messages are, and how I can go about resolving them? WARN 2012-02-02 14:02:56 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /net/launchpad/lens/utilities does not exist WARN 2012-02-02 14:02:56 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /net/launchpad/lens/utilities does not exist WARN 2012-02-02 14:02:56 unity.iconloader IconLoader.cpp:509 Unable to load contents of file:///usr/share/icons/unity-icon-theme/places/svg/category-installed.svg: Error opening file: No such file or directory WARN 2012-02-02 14:02:56 unity.iconloader IconLoader.cpp:509 Unable to load contents of file:///usr/share/icons/unity-icon-theme/places/svg/category-available.svg: Error opening file: No such file or directory WARN 2012-02-02 14:02:56 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /net/launchpad/lens/askubuntu does not exist WARN 2012-02-02 14:02:56 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /net/launchpad/lens/askubuntu does not exist I am also getting Nautilus errors logged here. I do not remember what lenses I installed, or from where (Software Center, manual install, etc).

    Read the article

  • How to hide whitespace indicators in Vim

    - by Exupery
    Vim was showing some whitespace with commas and periods on a red background which I didn't want. After some googling I was able to get rid of the commas and periods by removing list and listchar lines from .vimrc, I was also hoping this would remove the red backgrounds it was putting in these places, but all it did was change that to white (see image). Is it possible to completely remove the whitespace background indicators in Vim? My .vimrc settings can be seen here

    Read the article

  • Huwaei Modem working fine!

    - by user109156
    yesterday I installed Ubuntu 12 in my sony vaio lappy. I have Huwaei E173 3G modem, simply inserted that modem into usb slot, after a few seconds modem started blinking finding as activated. I opened network profile and created a new network under 'Mobile broadband' tab everything was automated and I felt awesome, infact I used net for a while. Next morning, I placed modem into usb, nothing happened, no sign of modem presence even but modem is blinking, I tried creating a new connection once again but attained no luck. Kindly help me in resolving problem. regards sandy

    Read the article

  • Cannot access the filesystems using LiveCD (LVM2,EXT2)

    - by ftkg
    I have to restore the /etc/passwd file I accidentally renamed in my Ubuntu Server, so I booted the machine using a LiveCD. Problem is, the system filesystem does not appear in Nautilus, under 'Devices'. Am I missing anything? ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000956dc Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 625141759 312320001 5 Extended /dev/sda5 501760 625141759 312320000 8e Linux LVM ubuntu@ubuntu:~$ mount /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) ubuntu@ubuntu:~$ sudo blkid /dev/loop0: TYPE="squashfs" /dev/sda1: UUID="aad69790-198d-45bc-9ccd-e4cba7456914" TYPE="ext2" /dev/sda5: UUID="wbIDX7-RILL-VtFT-gX15-N1GJ-Yyfg-V8Oe5m" TYPE="LVM2_member" /dev/sr0: LABEL="Ubuntu 12.04 LTS i386" TYPE="iso9660" ubuntu@ubuntu:~$ cat /etc/fstab overlayfs / overlayfs rw 0 0 tmpfs /tmp tmpfs nosuid,nodev 0 0

    Read the article

  • Modify Ath9k driver and debug with aircrack-ng

    - by user4724
    I own an ALFA Adapater with Atheros AR9271. What I would like to do is to edit the driver this device uses (do some modifications in the source) and debug it. I'm really new to this, a start guide would be really appreciated. BTW, my question is similar to the question in this topic: How to modify wireless ath5k driver? but I didn't find an answer to work with (that explains the whole process) Thank you very much in advance

    Read the article

  • Errors when trying to compile the driver for the rtl8192su wireless adapter

    - by Tom Brito
    I have a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme says to use the make command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g sudo lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) sudo lsusb Bus 002 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1 Bus 001 Device 003: ID 0b05:1786 ASUSTek Computer, Inc. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • "Unable to install initrd-tools" error during installation.

    - by Rahul
    Was trying to install Ubuntu from a CD on a machine which already has windows on it, choose the option of "Resize IDE1 master (hda) and use freed space" during the "Install the base system" step. After that i get the error: Unable to install initrd-tools. An error was returned while trying to install the initrd-tools package into the target system. Check /target/var/log/bootstrap.log for details. The problem is one one hand i cannot proceed with the complete installation and on other hand if i remove the CD, am not able to boot windows as it says No bootable device. Would highly appreciate for any recommendations.

    Read the article

  • Dell XPS 15 L502x and Ubuntu 11.04 - HDMI output

    - by Jones
    Recently I've bought my dream's notebook, a Dell XPS 15 but since then this dream became a kind of endless nightmare. I'm almost getting crazy to make my graphic card driver work properly, but it seems to be just impossible. Yes, I have a 2GB NVIDIA GeForce GT 540m (Optimus) in it! It simply doesn't work. Every time I generate the xorg.conf Ubuntu hangs on while starting up, which forces me to remove this file to be able to start the notebook with the standard graphic settings. Another problem is that the Dell XPS 15 does NOT have a VGA output, but a HDMI. So, to be able to use a second monitor I have to configure it by the NVIDIA X Server Settings, which just works if the driver is properly initialized with the xorg.conf. I've also tried to make it work with the Bumblebee, but unfortunately it didn't help me much with the HDMI output. Do you guys have any idea to solve this deadlock? Is there any way for me to use my second monitor?

    Read the article

  • "Waiting for Sound System to respond." error dialog

    - by Paulo Truta
    Hello guys. I'm having a nasty problem with the Sound Menu on my Ubuntu 10.10 Installation. What happens is that the sound control icon is blocked, and i can't control the master volume. If i try to get to the Sound Preferences i get a little Pop-Up Window saying: "Waiting for Sound System to respond...". Don't know what to do... Apart of that, sound works great. Thanks a lot ;) PS: I made 2 screenshot uploads. Hope it helps.

    Read the article

  • How do I change the background colour of Leafpad?

    - by Lao Tzu
    All the information that google returns says to change ~/.gtkrc2.0-mine. Here is my .gtkrc-2.0: # -- THEME AUTO-WRITTEN BY gtk-theme-switch2 DO NOT EDIT include "/usr/share/themes/Dust/gtk-2.0/gtkrc" include "/home/mars/.gtkrc-2.0.mine" # -- THEME AUTO-WRITTEN BY gtk-theme-switch2 DO NOT EDIT Here is my .gtkrc-2.0.mine: style "default" { GtkTextView::cursor_color = "#ffffff" base[NORMAL] = "#111111" base[ACTIVE] = "#111181" base[SELECTED] = "#808080" text[NORMAL] = "#c0c0c0" text[ACTIVE] = "#c0c0c0" text[SELECTED] = "#111111" } class "GtkTextView" style "default" Still appears with a white background!

    Read the article

  • Cannot login other users since upgrade

    - by Jo Rijo
    I had 10.10 with 4 users and upgraded to 12.04.1 from CD. (in the installation options it detected I had 10.10 and windows installed and I chose the option to upgrade keeping users and their homes and all possible apps) Now the main user works fine but there where none of the other users, only their home directories, so I decided to create new users with the same names and seems to worked fine, there was no extra home directory created so I assume it linked the newly created user with the home directory of the same name, but I can't log in. It accepts the password goes black and takes me back to the login screen (lightDM) If I create a new user with a different name it works fine but then it creates it's own home directory.

    Read the article

  • How do I switch the Command key and Control key on a MacBook Pro?

    - by kalaracey
    I have scoured the web, and I can't seem to get Xmodmap / anything to work properly. I want to swap BOTH my Command keys with my Control key - in essence, inverting what they do currently. How would I do that? I tried xmodmap -e "keycode 133 = Control_L" and corresponding commands for keycodes 134 (right command) and 37 (control left). I even tried these commands, plus xmodmap -pke > ~/.Xmodmap and xmodmap ~/.Xmodmap in .xinitrc. My end goal is I want HUD / Dash to come up when I click control and command to functional control, i.e., control-v is a commond shortcut to paste, i would click command-v

    Read the article

  • How can I debug VNC screen repainting issues?

    - by stevecoh1
    I have what some might consider a trivial use for VNC, but I'd like to get it to work and it's technically interesting to me. My use case is that I'd like sometimes to be able to control my desktop from my living room while watching tv. The desktop runs Ubuntu, currently 12.04, but that may change soon. I'm using the default Vino server. I'd like to control it from my IPad and I have a nicely performing WiFi. I got the well-regarded (if reviews can be believed) app Vnc Viewer for the iPad. It's not working as well as I'd hoped. The problem is the speed of repainting. It's abysmally slow. I can click a close button, walk over to the desktop and see that the window has closed, but on the iPad, the VNC Client won't show the close for minutes if ever. I've noticed that CLOSING windows takes a lot longer to update than to open them. So the question is is this primarily client or server-caused? And if server-caused what can be done about it? Is Vino the best client or is something else better? Thanks

    Read the article

< Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >