Search Results

Search found 30127 results on 1206 pages for 'home network'.

Page 350/1206 | < Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >

• MacBook's Airport not working from menu bar

  - by not22

  All of the sudden my MacBook doesn't connect to my wireless after waking from sleep. My network shows up at full signal strength and it remembers the password correctly, but I get an error message when I try to connect from the menu bar. The only way I can get on the internet is to go through Network Diagnostics and turn it on there. I don't understand why it works every time through Network Diagnostics and never on it's own or through the airport menu bar. Nothing has been changed or installed or reset on my computer that I know of. Restarting doesn't fix it, nor does turning off the airport card. Any ideas?

  Read the article

• psloggedon timeout question

  - by user60707

  I have a list of machine names from my network that I have put in a batchfile to run through the list and show me who is logged onto each. psloggedon \machineA psloggedon \machineB psloggedon \machineC psloggedon \machineD psloggedon \machineE psloggedon \machineF Psloggedon works fine, however when it hits a machine that isnt actually on the network, it hangs for a good 30 - 60 seconds before moving onto the next machine...I was just wondering if there was any way to speed this up so that if it hits a machine that isnt on the network, it moves onto the next machine in the list much quicker. I have read in other places that this could be possible by adding a ping -n loop into the command but im not sure how to get that to work? any ideas guys? Many thanks in advance. Jimmy

  Read the article

• Tunneling traffic through two VPN hops/tunnels.

  - by Roberto Sebestyen

  I am a web developer, and I find myself often working from home. But when I do, I am forced to Remote Desktop to the Office desktop computer and work from there. The reason is because the application I am working on needs to connect to servers at a Data Center via a VPN from the Office Desktop. HomeDesktop (Win7) --- PVN --- OfficeDesktop(WinXP) --- VPN --- Data Center What I would really like to do is, I would like to find a way to be using my Home desktop developing on that, and whenever my computer tries to access servers on the Data Center, I would like to tunnel that traffic through the two VPN tunnels separating me and the Data Center. I have admin privileges on both Office Desktop and Home Desktop, but I do not have any admin privileges in the Data Center. So what kind of tunneling solution could I use here? Is it even possible?

  Read the article

• Eclipse dissapears when minimized and will not come back (12.04 Unity)

  - by Kevin

  I have Ubuntu 12.04 x64 running Unity3d. I downloaded Eclipse from eclipse.org (not the software center) and created a desktop using gnome-desktop-item-edit. The resulting file is below, and I added it to the launcher on the left of the screen by dragging that file on. #!/usr/bin/env xdg-open [Desktop Entry] Version=1.0 Type=Application Terminal=false Icon[en_US]=/home/kevin/eclipse/icon.xpm Name[en_US]=Eclipse Exec=/home/kevin/eclipse/eclipse Name=Eclipse Icon=/home/kevin/eclipse/icon.xpm#!/usr/bin/env xdg-open However, when I minimize eclipse, eclipse disappears. There is no arrow to the left of the icon in the launcher like usual. And when I click on the launcher again, it tries to relaunch eclipse instead of bringing back the one that was minimized. Eclipse also does not show up when I alt-tab. I know it is still running because I can see it running with the system monitor. Note that Eclipse works properly until it is minimized. I have observed this behavior on two different computers now. Does anyone know how to fix it?

  Read the article

• Lot of Multicast traffic on LAN

  - by Nel

  Recently the whole network at work is being hit by multicast traffic originating on the LAN itself. I did some investigating and the service which seems to be responsible is ws-discovery. I have attached a screenshot of wireshark capturing the traffic. I have tried shutting down the source machine from which it was originating, but the multicast traffic still seems to be present in the network. My network topology 2 subnets - 10.10.10.0/24 and 10.20.10.0/24. Gateway is a debian system. We have 3 switches for 3 floors. They are all unmanaged Dlink 24-port switches. Multicast blocking at switch level is out of the question. Any solutions? :(

  Read the article

• Shareing two internet connections on my laptop running Windows XP

  - by ashwnacharya

  I have two internet connections, one is internet via our organization's corporate LAN network, and the other one is mobile broadband via a USB modem Is there anyway I can share internet connections and use them simultaneously? I want to use the corporate LAN network for normal browsing and connecting my email client, and I want to use the USB modem for establishing a VPN connection. Will I be able to maintain both the connections simultaneously? Can I have parallel downloads, one using our corporate network, and the other one using the mobile broadband? Will I be able to switch my browser between these two connections? My laptop runs Windows XP Service Pack 2.

  Read the article

• How to automate changing my ip?

  - by callisto

  I am very new to OSX. I will use my MBP at work and home. I would like to be easily able to switch my ip when changing location. Thus far I have dabbled with the automator, hoping to do something like this: [pseudocode] If IP = 192.168.0.10 root# changeip 192.168.0.10 10.0.0.15 else root# changeip 10.0.0.15 192.168.0.10 The reason for this is that my IP from home will not allow me access at work and vice versa. I have friends and family who drop in now and then, multiple wireless devices set up for the home IP range. Changing all of that to accommodate one new device (the Macbook) would make me reconsider my foray into OSX. I'd rather have the MBP adapt to me than I to it.

  Read the article

• HP DL580 G5 Hyper-V networking problem

  - by mr-perfect

  Hi I have installed the hyper-v role on a DL580 G5 cluster. The host operating system is a server 2008 x64 patched to the maximum. Everything has gone fine, but if I install a guest operating system, actually a windows server 2008 x64 I can't reach the network from it. It send many packets, but don't received any, so I can't ping the external network as well. I have installed the latest drivers to the server and unintalled the network configuration utility from the physical server, but no luck. I added a legacy adapter to the guest binded to the same phisycal adapter on the host machine but it can't help Any idea welcome...

  Read the article

• Would firewire networking be better than 100Megabit ethernet?

  - by Josh

  My office network has a fully switched 1000Megabit ethernet network. I have an Apple iMac with a Gigabit NIC and FireWire, and a Compaq laptop with a 100Megabit NIC and a 4-pin FireWire interface. Accessing my office's shared drives using my laptop is (obviously) much loswer using my laptop than my iMac. Would I see a noticeible performance boost if I enabled Internet Connection Sharing on my iMac and shared the private ethernet network from my iMac with my laptop over FireWire? FireWire is 480Mbit/sec, right? So would I see roughly 4x speed improvement with such a setup?

  Read the article

• Folder permissions when using /etc/skel and pam

  - by rothgar

  I have a Red Hat 5.8 server that is bound to active directory and users are authenticated via active directory when they log in via sftp. User home folders are created during login using /etc/pam.d/system-auth. The specific line that creates the home folder is session optional pam_mkhomedir.so skel=/etc/skel/ umask=0066 This correctly gives home folders 711 permissions so no one else can read their directories. The problem is, the pam_mkhomedir.so also modifies permissions on all folders/files inside the /etc/skel folder which I don't want. There is a public_html folder (for apache) which needs to have 755 permissions so users can create web pages. Is there a way for me to either a) stop pam_mkhomedir.so from recursively changing all the file permissions or b) create a script that creates the public_html folder after skel is copied and to set the correct permissions?

  Read the article

• cloning mac address of physical server converted into vmware server

  - by user24981

  We've recently converted a physical Windows Server 2003 into vmware using P2V. However, one of the pieces of software on the 2003 machine are still looking for the old server's network MAC address in order to run. I've read several articles where it's discussed that you can modify the last part of the generated address and set it to static, but I need to clone the whole mac address to mimic the one in the old server. We're running CentOS and VMware server 2.0 as the host system. I was told that maybe adding in a second network card in the host and setting the virtual system's nic to that card instead of "bridged" would allow me to edit the vmx file and clone the whole MAC address. I can't use the old network card from the physical server because it's ISA and our new bus is PCI Any ideas? Thanks, Mike

  Read the article

• Stunnel delaying boot

  - by Onitlikesonic

  My stunnel implementation works fine when the network is plugged in but it takes an awful amount of time, which delays the whole boot process, when there is no network connected to the machine. As extra information: I'm using "delay=yes" I'm using an fqdn (e.g: stunnel.mydomain.com) for the connections Using ubuntu but this also happened with centos5 previously How can this be avoided or a timeout specified? edit: doing an strace as suggested by symcbean shows the following (including the last part where it hangs): [...] --- SIGCHLD (Child exited) @ 0 (0) --- rt_sigreturn(0x11) = 0 close(3) = 0 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6039 clone(child_stack=0, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7ff9ce0c79d0) = 6046 wait4(-1, [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6046 --- SIGCHLD (Child exited) @ 0 (0) --- rt_sigreturn(0x11) = 6046 write(1, "[Started: /etc/stunnel/stunnel.c"..., 37) = 37 write(1, "stunnel.\n", 9) = 9 exit_group(0) = ? [...] stunnel hangs in this line: wait4(-1, and when i plug in the network cable it continues to show [{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 6046

  Read the article

• Why is my router not routing?

  - by dwj

  Starting a week and half ago my router stopped working with my cable modem. I went to sleep with it working and woke up with it not. I swapped in another router and am still having issues; I was gone for 10 days so now I'm back to trying to figure it out. While I was gone I left everything (cable modem, router, and computer) powered off. My setup: Comcast Ambit cable modem (from Comcast) Netgear WGR614 v4 router -- replaced with Linksys WRT54GS v1.1 Windows XP SP3 other computers, all currently unplugged The modem is using the firmware (ver 2.105.2001) provided by Comcast; hardware version 1.3 The Linksys router is using FW ver 4.71.4 (latest for this release of HW), factory defaults I am only using the wired connections; no wireless. I have swapped out all of the cat5 cable. If I plug my computer directly into the cable modem, I can ping by name or number. Everything works perfectly. If I plug my computer into the router and the router into the modem, I cannot access anything outside of my local network. This is the exact setup I've used for the past 5 years; there were no changes in the past year. Now here's the interesting part: I can log into the Linksys router and get status information from it; everything appears good. Using the Diagnostics, I can run ping and traceroute to any site on the internet. These work perfectly. From my computer, I can ping the router and the modem. However, I cannot ping anything on the internet by with name or number. If I plug in another computer, I can ping it successfully. I've included two transcripts below that show these two attempts. Addresses, DNS, gateways, etc. look good. I cannot access the internet through either router. I am at a loss here. Suggestions? Help! Computer to Router to Cable Modem C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:21:55 PM Lease Expires . . . . . . . . . . : Tuesday, March 23, 2010 10:21:55 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Ping request could not find host google.com. Please check the name and try again . C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\ Computer to Cable Modem Directly C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 DHCP Server . . . . . . . . . . . : 68.87.76.10 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:18:50 PM Lease Expires . . . . . . . . . . : Monday, March 22, 2010 11:12:31 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Pinging google.com [74.125.19.99] with 32 bytes of data: Reply from 74.125.19.99: bytes=32 time=20ms TTL=55 Reply from 74.125.19.99: bytes=32 time=17ms TTL=55 Reply from 74.125.19.99: bytes=32 time=28ms TTL=55 Reply from 74.125.19.99: bytes=32 time=18ms TTL=55 Ping statistics for 74.125.19.99: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 17ms, Maximum = 28ms, Average = 20ms C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=17ms TTL=55 Reply from 74.125.19.104: bytes=32 time=16ms TTL=55 Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 16ms, Maximum = 18ms, Average = 17ms C:\

  Read the article

• suddenly cannot mount nfs share from Windows 7

  - by bing

  I recently reinstalled my file server (moved from fedora to Ubuntu server). Now I cannot mount my nfs share from Windows 7, mounting from Mac OSX works fine. In Windows I either keep getting "the semaphore timeout period has expired" or "an unexpected error has occured". Does Ubuntu need some special magic to allow Windows 7 to mount an nfs share? This is my exports file /home/Bing/ 192.168.1.*(rw,async,insecure,no_subtree_check) /home/Bing/mnt/EXTRN2 192.168.1.*(rw,async,insecure,no_subtree_check) /home/Bing/mnt/EXTRN3 192.168.1.*(rw,async,insecure,no_subtree_check)

  Read the article

• Acer Aspire 7739G-6647 won't connect to the internet

  - by Nux

  Acer Aspire 7739G-6647, it belongs to a family member. I reinstalled the chipset, LAN drivers, ethernet controllers, etc. I'm positive it's not my router or modem or anything like that. I have other laptops running on the network, this one just has some strange issue. For some reason, it's saying "Work Offline" is enabled when I open Windows Media Player, and the PC seems to be connected to the network, but on the graphic in networking, it doesn't show the connection between the network and the internet. Could anyone try to state any possible reason for this issue? Any help is appreciated.

  Read the article

• Unable to connect to wireless internet(wifi) through KDE plasma desktop

  - by Mohammed Arafat Kamaal

  I installed the KDE plasma desktop through Ubuntu software center. I am on Ubuntu Lucid Lynx. After the install, Im unable to connect to my wifi connection in the KDE session. But I can connect to my wifi perfectly through GNOME session. I've tried a lot without much success. Also KDE doesn't store my password correctly and keeps prompting for authorization again and again. Some of the things that I noticed. Network is detected, Network name and strength is also displayed. Other characteristics also appear properly. When the credentials are supplied, it accepts them and continually displays the message "Setting network address". However this process never succeeds. At this stage the password is repeatedly asked many times but the connection is never established. Some of the other things that I did, I have also tried other things like restarting my modem and the computer. That didn't work. I tried to restart nm-applet and KNetworkManager. That didn't work either. ifconfig display all my interfaces and Mac addresses correctly. Since its working fine GNOME the drivers are fine. This is sure a KDE specific issue. Other threads related to this on the interwebs don't offer much information either. Please share a solution for this.

  Read the article

• gnome-terminal. New tab opening

  - by thillai-selvan

  I am launching the gnome-terminal and I am working in a specific path For example: /home/user/programs/c/. Now I am opening another tab. When I am opening the new tab it is also in the same path. i.e. the new tab's pwd will be /home/user/programs/c/ But what I want is when I am opening a new tab its pwd should be /home/user. How can I achieve this? Any help much appreciated. Thanks in Advance!

  Read the article

• How to setup a 1 way trust, Windows Server 2008 R2

  - by MichaelOz

  I am on my home network and connect to workplace via a VPN. I have a DC on my home network (DC1 , domain = home). How can I setup a 1 way trust, so that I am able to run executables, such as SQL Management Studio using RunAs - then type in credentials for work domain? First question is, will a 1 way trust solve this, and can I set this up without bothering a network admin at workplace (assuming I have a domain account with enough permissions on work domain) If yes - any good step by step guide to setup 1 way trust? Server is Windows Server 2008 R2. As mentioned its DC running DNS Role too. Thanks in advance

  Read the article

• Cannot enable wireless on an Intel WifiLink 1000 on an Lenovo Ideapad z570

  - by Brij

  I am using the ubuntu 11.10 on lenovo ideapad z570. My wireless internet is not working. I have ensure that wireless switch is on. Windows 7, wireless works great.However ubuntu 11.10 is not allowing me to enable wireless connection. I have run the following command and here is the status. sudo lshw -class network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:1c:a4:a4 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:42 memory:d0500000-d0501fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 05 serial: f0:de:f1:64:b6:62 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:2000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff Here is rfkill list all output: rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no Note : Windows 7, wireless card property shows that Intel WifiLink 1000 BGN. Could someone help me to fix this issue.

  Read the article

• Cannot connect Ubunto to Windows pc either direction

  - by Frank A

  New to ubuntu and really struggling with this. I want to connect to my old windows XP Pc on our home network. Searching for solutions gets complicated as at one level you are told use Connect to Server. I set to Windows Share, type in server IP address.. ... I get "Failed to retrieve share list from server" Demo on Youtube worked with no problem. Other advice in ask ubuntu is you need to install samba. Did that but nothing seems to happen when I try and run it other than it asking for admin password. (How do you tell what is running on Ubuntu?) So I try the other direction Windows XP to Ubuntu. I made the ubuntu directory within home frank shared and tried various combination such as \ipaddress\home\frank but just "The folder you entered does not appear to be valid. Please choose another." My entire data only drive is shared in Windows and no problems accessing that from other Win XP boxes on our network There are no alerts in Windows firewall, Ubuntu Firestarter did block but changed that to allowed... or so I thought. In firestarter I had set up Inbound traffic policy 192.168.1.1/24. And since then it has added the ip address of the win pc twice. So, I am in a state of confusion not knowing whedre to turn next so thought Ask Ubuntu :)

  Read the article

• Two NIC cards with the same metric - Internet traffic going out the wrong one

  - by bvanderw

  I have two NIC cards in my computer - one is connected to our corporate network and the Internet, the other is connected to a private LAN through a Linksys WRT54G. Both cards use DHCP. This was never an issue with Windows XP, but with Windows Vista (and Windows 7) the metric for the 0.0.0.0 route is the same (20), and it appears that some network traffic that should go out my main network card are going out my secondary card instead. The solution to date is to delete the 0.0.0.0 route associated with the second NIC card, but I have to do this several times a day. Is there a better solution? --Bruce

  Read the article

• steam won't open after install

  - by Dan Cooper

  I've looked all over the place for a solution but no one seems to be getting the same error codes as me. When I try to run Steam through terminal I get the following error: Running Steam on ubuntu 13.04 64-bit STEAM_RUNTIME is enabled automatically Installing breakpad exception handler for appid(steam)/version(1367621987_client) Installing breakpad exception handler for appid(steam)/version(1367621987_client) unlinked 0 orphaned pipes Gtk-Message: Failed to load module "overlay-scrollbar" Installing breakpad exception handler for appid(steam)/version(1367621987_client) [1013/104817:WARNING:proxy_service.cc(646)] PAC support disabled because there is no system implementation /home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/steamUI/../common/steam/client_api.cpp (281) : Assertion Failed: ClientAPI_InitGlobalInstance: InternalAPI_Init_Internal failed. Assert( Assertion Failed: ClientAPI_InitGlobalInstance: InternalAPI_Init_Internal failed. ):/home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/steamUI/../common/steam/client_api.cpp:281 Installing breakpad exception handler for appid(steam)/version(1367621987_client) Uploading dump (out-of-process) [proxy ''] /tmp/dumps/assert_20131013104817_1.dmp /home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/steamUI/SteamStartup.cpp (627) : Assertion Failed: ! "There was a problem with your Steam installation.\n" "Please reinstall steam.\n" unlinked 2 orphaned pipes CAsyncIOManager: 0 threads terminating. 0 reads, 0 writes, 0 deferrals. CAsyncIOManager: 75 single object sleeps, 0 multi object sleeps CAsyncIOManager: 0 single object alertable sleeps, 1 multi object alertable sleeps [2013-10-13 10:48:16] Startup - updater built May 3 2013 15:08:27 [2013-10-13 10:48:16] Verifying installation... [2013-10-13 10:48:16] Verification complete Shutting down. . . [2013-10-13 10:48:17] Shutdown Finished uploading minidump (out-of-process): success = yes response: CrashID=bp-d172a742-b7dd-419c-b235-d60c32131013 I've tried sudo apt-get purge and terminal tries to tell me I don't have Steam installed. I've tried reinstalling with software center but that doesn't help either.

  Read the article

• Windows 7 Upgrade from an OEM disc

  - by user1026361

  I recently bought a new laptop with Windows 7 Home Premium and a Windows 7 Pro Upgrade key. It also comes with a cavalcade of bloatware. I would like to start with a fresh install of Windows. I understand that I can upgrade to W7Pro using the option in the Home Premium Start menu. However, I also own a Windows 7 Pro OEM installation disc from another computer. Can I use this Windows 7 Pro OEM disc to install Windows, and when it asks me for my key, provide the upgrade key purchased? Or am i required to install Home Premium first and then apply my upgrade key?

  Read the article

• setting up eclim to support php

  - by tipu

  i have the plugin pdt installed with my eclim using: DISPLAY=:1 ./eclipse/eclipse -nosplash -consolelog -debug \ -application org.eclipse.equinox.p2.director \ -repository http://download.eclipse.org/releases/helios \ -installIU org.eclipse.php.feature.group i compiled the thing using dargs for php: ant -Declipse.home=/home/tipu/downloads/eclipse -Dplugins=php but creating a project gives me: java.lang.IllegalArgumentException: Unable to find nature for alias 'php'. Supported aliases include: javascript=org.eclipse. wst.jsdt.core.jsNature, java=org.eclipse.jdt.core.javanature while executing command (port: 9091): -editor vim -command project_create -f "/home/tipu/phpproj2/" -n php thoughts on how to fix?

  Read the article

• ISP doesn't allow incoming connections (i.e., hosting a server) - anyway to get around this using a VPN?

  - by Josh1billion

  My ISP, like many today, doesn't allow incoming connections, so if I try to host server software on my home PC, then anyone (even myself) trying to connect to that server software via my public IP address is not able to establish a connection. This becomes a problem because hosting online games is impossible. I do have a VPS Linux box rented; is there any VPN software I could install on it that I could connect to from my home PC, and then anyone connecting to a specific port on that VPS will just have the traffic tunneled to my home PC, allowing me to host games that way? If so, what software do I need (on both my PC and on the VPS), and how do I configure it?

  Read the article

< Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >