Search Results

Search found 25124 results on 1005 pages for 'install upgrade'.

Page 350/1005 | < Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >

  • Cannot boot from Ubuntu Live CD on preinstalled Windows 8 laptop

    - by seferov
    I bought a Sony Vaio with Windows 8 yesterday. I want to install Ubuntu, (latest version), alongside Windows. There is an assist button on the laptop to enter the boot option menu, (otherwise, Windows 8 is booted by default. Whenever I choose the, 'boot from CD' option, it says 'No operating system found'. CD is valid since I tried it on another computer and it worked fine. I have tried both versions, 12.04 and 12.10. What is the problem, or how should I install Ubuntu on my laptop?

    Read the article

  • Ubuntu 12.04 USB (HP)

    - by xShadoWolf
    I have put ubuntu 12.04 on a USB (Kingston 8GB) and I go to install and I can't it gives options for erase and something else I have 4 primary partitions win7 for my main partition and 3 created by HP HP_TOOLS, HP_RECOVERY and SYSTEM To get to my point how do I install ubuntu on HDD I have a HP probook 200 notebook PC. Can I remove any partitions? When I do sudo fdisk -l This Comes Up Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3ed7e7b0 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 946591743 473091072 7 HPFS/NTFS/exFAT /dev/sda3 946591744 976560127 14984192 7 HPFS/NTFS/exFAT /dev/sda4 976560128 976771119 105496 c W95 FAT32 (LBA) Disk /dev/sdb: 7803 MB, 7803174912 bytes 122 heads, 58 sectors/track, 2153 cylinders, total 15240576 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 8064 15240575 7616256 c W95 FAT32 (LBA)

    Read the article

  • Can I use WUBI as an offline installer for 12.10?

    - by ning
    Can I use WUBI as an offline installer? I already had the .iso file of ubuntu 12.10 - i386, and inside the iso is wubi.exe. For example: I will do a partition of, E:30gb then i will target E: in wubi so that it will be Ubuntu then use the .iso file to install it on E: My Computer: Acer Aspire 5750-6683 i5-2450m processor Is it fine to do a dual boot? Can I run Windows 7 Home Premium OS, with the custom theme and boot screen, can that effect dual booting? I just don't want to damage any of files or either any of OS And if I can't boot any of the operating systems what should I do? Can I avoid doing a clean install if that ever happens?

    Read the article

  • WiFi on Ubuntu 12.04 custom: downloading unbearably slow

    - by Mark
    iwconfig reports 11 Mbps, yet I've seen as low as <1 KBps. This is the latest in my laundry list of Ubuntu problems in a dual-boot machine (cyberpowerpc custom, intel i7-3820, nvidia gtx 570). I received it two days ago, Windows 7 running fine, still having problems with Ubuntu. The browsing is intermittent but unacceptable. e.g. I could get to this site last night but I couldn't post this question. The downloading is unbearably slow, I can't download anything or install any packages because the speed is so slow. e.g. I am trying to install vim which is inexplicably missing from my 12.04 install (add another one to the problems list) and my download speed reported in the terminal was 241 B/s. Yes, bytes. iwconfig reports 11 Mbps, which further adds to the confusion. User@ubuntu:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:39:76:2C:A1 Bit Rate=11 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:54 Invalid misc:18 Missed beacon:0 eth0 no wireless extensions. Any ideas? I see this is a problem a lot of people, but none of the on line solutions have worked for me so far. e.g. one site recommends editing the ath9k.conf file in /etc/modprobe.d, yet this file isn't even in the folder: User@ubuntu:/$ cd etc/modprobe.d User@ubuntu:/etc/modprobe.d$ ls alsa-base.conf blacklist-oss.conf blacklist-ath_pci.conf blacklist-rare-network.conf blacklist.conf blacklist-watchdog.conf blacklist-firewire.conf dkms.conf blacklist-framebuffer.conf nvidia-current_hybrid.conf blacklist-modem.conf nvidia-graphics-drivers.conf I think the nvidia gpu might be mucking things up. I had the "blinking cursor" problem when installing in the first place, and then I had the monitor out of range problem as well. I have my faithful Asus laptop, which is running Ubuntu 12.04 just fine. The only difference is executing host -t SOA local in the terminal gives User@ubuntu:~$ host -t SOA local local has SOA record local. nobody.localhost. 42 86400 43200 604800 10800 in my new machine, and the command reports Host local. not found in the laptop. Help would be most welcome, as I am in danger of reverting back to Windows. I'm seriously considering it. Sorry for the length, trying to show my effort in resolving the issue and include terminal snippets that might be helpful.

    Read the article

  • Installing Ubuntu 11.10 on HP Envy 15 - Partition Problems

    - by imparator
    I am trying to install Ubuntu 11.10 on my HP ENVY 15, however I am getting some problems. When I come to the partitioning section of the installation I am given my 4 partitions that I have. I change the partition of my 450 gb to 420 gb, so that I can use that 30gb space that I free up to install Ubuntu on it. After I do this step, instead of seeing the keyword to the 30gb I see unusable. I have read that there can not be more than 4 partitions somewhere for a UBUNTU installation, but that is not true, because I just installed Ubuntu 11.10 on my Lenovo which has the same amount of partitions as my ENVY ( I do get problems on my lenovo with installing ATI drivers but that is a completely different story). Does anybody have an idea of why I am getting an unusable notification next to my freed up space?

    Read the article

  • localhost .htaccess not working?

    - by diff
    Now i install WordPress then BuddyPress, after the install buddypress i run the site, home page was run, when click the other page link the page was not working. show this error Not Found The requested URL /Repo/website/groups/ was not found on this server. Apache/2.2.17 (Ubuntu) Server at localhost Port 80 After then i check my local htaccess, here is all are ok, but why the problem is showing. Here is my local htaccess .. <Directory /> Options FollowSymLinks AllowOverride all </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory>

    Read the article

  • How do I recover my accidentally lost Windows partitions after installing Ubuntu?

    - by Totally newbie
    I have a Toshiba satellite A-200 laptop with a Vista OS on it with 4 NTFS partitions (C:) Vista (D:) Entertainment (E:) Work (F:) Sources and I wanted to start using Ubuntu instead. So I tried it first from the live CD and everything was OK and all the partitions were shown and working and so I decided to install Ubuntu to replace Vista on the (C:) drive. After I did that I can no longer find my folders and files on the (D:), (E:), (F:) partitions and the only file system that is shown is one 198 GB although my HDD is 320 GB. I can't access the lost data on the remaining 120 GB which I hope is still there and not totally lost I am now working from the live CD but I am unable to install testdisk. Can I recover the Vista partitions by the product recovery CD to get my laptop back to the factory settings? Can I recover the NTFS partitions using a recovery program for Windows or will that make the problem worse? I need these data badly as I don't have a backup for them.

    Read the article

  • Given a used laptop with Ubuntu installed, how do I get past the password demands?

    - by user287494
    Recently given a laptop with Ubuntu 12.1 installed alongside Windows 7. Can only access Ubuntu, which is fine for everyday use (LibreOffice, Firefox, etc.) but there's an authentication password required to install the 500+ updates, and when trying to run anything in terminal, it asks for "quiz's" password. It won't allow me to go into root mode to bypass the password (if that's even a real thing?). I'm completely new to Linux, but am fascinated at the capabilities and would like to mess around some more, but keep getting stopped by these passwords. What do I have to do? Uninstall and re-install? How does one do that if I don't even have access to the Windows 7 OS because it is password protected as well? Thanks in advance for any information and help.

    Read the article

  • khotkey script calling bindings stop to work on switching to Quantal

    - by Adobe
    I have many scripts which I call with khotkey. For example I have a hotkey which executes: bk_starts_or_brings.bash 'Konsole' konsole On updating to Quantal -- it stops to work: if I call that key -- it searches bk_starts_or_brings.bash 'Konsole' konsole in google in default web-browser. I tried: sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core sudo dpkg-reconfigure xserver-xorg sudo apt-get install build-essential cdbs dh-make dkms execstack dh-modaliases fakeroot libqtgui4 When I start the command from konsole -- it works as expected, but when I call it with khotkey -- it doesn't. I guess someone shadows my keybiding. Or some daemon is not run on startup.

    Read the article

  • Nvidia x server setting no specific option

    - by WiiTold
    I just freshly installed Ubuntu 14.04 and did only 4 things: 1) $ sudo add-apt-repository ppa:xorg-edgers/ppa $ sudo apt-get update $ sudo apt-get install nvidia-340 2) sudo apt-get install nvidia-current-updates nvidia-settings-updates 3) Went to Software & Updates/Additional drivers and chosen Using NVIDIA binary driver - version 340.32 from nvidia-340 (open source) I had to do part 3 because after part 1 I had driver version 304 Now to the main part. I cant set up custom resolution. When I had Ubuntu 12.04 year ago there was option in Nvidia x server setting called "Add custom resolution" or something like that and it was alright. Now this option is gone. How can I change/add custom resolution?

    Read the article

  • UEFI hardware and dual booting with windows

    - by user39803
    I've been struggling for 3 days trying to dual boot Ubuntu 11.10 and Windows 7. I want to use an SSD for my Ubuntu installation and an hdd for Windows. I realized that I have to install windows first and then ubuntu, and so I did that. When I first install windows it boots fine from my hdd, but when I add ubuntu on my ssd and restart, I get a black screen with a blinking cursor. I've read many forums where this is asked but haven't found a single solution that works. I've tried boot repair. It told me to make a fat ESP partition and I did that as well but it still doesn't work. I'm a noob and any suggestions would be really appreciated.

    Read the article

  • When trying running Ubuntu 12.10 off a usb drive, I encounter an error while prevent me from doing anything else

    - by Nil
    The details are that I used Universal USB Installer version 1.9.1.8 from pendrivelinux.com to install ubuntu 12.10 onto a 4gb pendrive as per instruction on Ubuntu's website. However, after I boot with drive I am met with the following message: "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Pressing Ctrl Alt F1 doesn't allow me access and the options on the dialog box either send me through a loop returning me to the previous dialog or just leave me dead in the water. Pressing Ctrl Alt Del does however restart the computer if I am dead in the water, so ubuntu isn't COMPLETELY unresponsive... I feel I should mention that I'm trying to run this distribution on my netbook. I can't install it directly to the harddrive since I need my current Windows distribution for certain programs that don't quite agree with WINE yet.

    Read the article

  • Software Center won't take into account my changed OpenID name: any idea?

    - by Pascal Av
    Failing to install IntelliJ from the Software Center, I realized my login is wrong in the /etc/apt/auth.conf entry that the install process generates. In this file, I see my original OpenID, that's the one which got automatically generated when signing up on Launchpad. It contains my last name so I changed it. I purged conf and binaries for Ubuntu One, reinstalled, deleted all listed "Devices" from app, all "Applications" from Launchpad. Deleted ~/.cache/software-center/, reboot, but still: When installing IntelliJ, the auth.conf file receives my original OpenID, not the modified one Problem is that the commercial subscription, for IntelliJ private PPA, uses my modified OpenID, so authentication attempt fails. I can't remove nor modify this subscription, even by changing back my OpenID into Launchpad. Any idea to solve this?

    Read the article

  • How to get a list of installed software packages? [closed]

    - by mblaettermann
    Possible Duplicate: How to list all installed packages? I am on a "grown" system. My initial setup was using Ubuntu 9.04. But now with the 12.04 Update I got stuck. My System is freezing or wired errors occour. I want to reinstall my system on a clean partition. How can I get a list of the packages I installed in my system? I want a list with the base packages not all the dependecies, so I can install all packages on my clean install again with the correct (maybe new) dependencies. I other words: I want to retrieve a list of all packages installed with apt-get directly. Not the ones it additionally installs with these packages. Thanks!

    Read the article

  • What of my Swap space if I choose to replace windows with ubuntu?

    - by Ramandeep
    When I install Ubunut 12.04 I'll be presented with three options - install ubuntu alongside windows, replace windows with ubuntu and 'something else'. If I choose 'replace windows' then I can not be able to make a swap space. So what then. I've 1GB ram. And if I choose 'replace windows' will my only C drive get replaced or what'll happen? If only C drive is affected then will data on the other 2 drives get saved? Again if yes, how can I access it (on which drive of ubuntu) after installing ubuntu?

    Read the article

  • Need help migrating from Wubi

    - by neilh
    I know this question has been asked, but I am looking for specific help with my partition selection. I want to migrate my install from wubi to be a dual boot. When I installed it I choose a small, partition, around 30GB. I am following these instructions: https://help.ubuntu.com/community/MigrateWubi I see sda4 matches that size, but has mount point as '/host', am I okay to use this one? EDIT: Here is a screenshot of my partitions. http://i.imgur.com/ozPe0.png My windows partition is actually not there, that is down as sdb1, so safely out of the way? I can confirm sda4 is the location of the 'virtual partition' and is an otherwise, unused 26GB partition. It's also where I would like to migrate to a full install to.

    Read the article

  • How to create a minimal installation in VMware Player for browsing?

    - by dbz_a
    I am trying to build a minimal vmware image to use for private browsing (also called a browser appliance). I have tried using images for other small linux distros, most of them are either too heavy (I do not want any other functionality than browsing and downloading) or outdated (DSL, various browser appliance images at vmware official site). I have downloaded the minimal Ubuntu install image (12MB) and was hoping to select only the needed pakcages while installing but it was not asking for my choices anywhere. I am new to the command line installation and I would be thankful if someone could point out how to install only needed packages, and what are the bare-minimum packages to browse internet (I plan to use only firefox and transmission)

    Read the article

  • Ubuntu 12.04 installer does not recognize Windows 7

    - by trainofk
    I recently purchased an ASUS N56VZ-ES71 laptop which came with Windows 7 Home Premium installed on it. I wish to dual boot Windows 7 and Ubuntu 12.04 on it. I shrank the hard drive partitions to leave about 150 GB unallocated for Ubuntu 12.04. When I boot the Live CD of Ubuntu and attempt to install, the installer does not recognize any other operating systems. Through reading a few questions, I have found that this is due to a GPT partitioning table that Windows uses. I ran boot-repair as per other threads' suggestions. This was my output: http://paste.ubuntu.com/1176988/ I suppose my question is: how do I proceed in order to get the installer to recognize Windows, so that I don't have to erase the current partition table and can get a safe install? Thanks in advance.

    Read the article

  • Multiple network installs with cached downloads

    - by popey
    I tend to do lots of Ubuntu installs, and I'd like them to be up to date from the moment I do them, and not have to install a bazillion updates as soon as the install finishes. I'd also like to cache those packages somewhere on a machine on my LAN, so I don't re-download all the packages every time. How easy is this to achieve? Is there a guide somewhere to making this happen? Bonus points if I don't have to burn any CDs or use USB sticks! Edit: I have noticed a lot of guides for PXE booting and would be tempted to set this up but every time I find one they seem to be old/outdated and broken. My home server runs 10.04 LTS.

    Read the article

  • 407 Proxy Authentication Required

    - by user38507
    When I try to install a software using Ubuntu Software center I get: Failed to download repository information Check Your Internet connection When I try to do a apt get-install something, I get: 407 Proxy Authentication Required I use a proxy server that requires a user-name and a password. I have set my systems proxy manually, by plugging in the required numbers in the Networks proxy and applied it system wide. I guess the problem now is plugging in my user-name and password. When I use INTERNET via Mozilla, it specifically asks me for my user-name and password.

    Read the article

  • Ubuntu 13.04 not detecting operating system Windows 8

    - by hualur
    I have a Samsung NP740U3E with pre-installed Windows 8 (boots with UEFI). I installed Ubuntu 13.04 without problems. Later, Windows 8 did a BIOS update which messed up everything, nothing would boot. I recovered everything and went back to fabric settings. Now Windows 8 works fine, but when I try to install Ubuntu it does not detect any operating system, so I can`t install Ubuntu alongside Windows. I`ve googled as much as I can, ran a boot-repair, disabled fast- and secure-boot. I have a GPT disc, been looking into gdisk without luck. Here`s my boot-repair summary http://paste.ubuntu.com/5835719/ Is it necessary to convert the GPT disc to MBR? Is it possible to hard-reset the disc "even more" than fabric settings? Thanks in advance.

    Read the article

  • Java on easypeasy

    - by Beatriz Rojo
    I have successfully installed easypeasy in an Asus EeePC. I want to use the authoring programm Hot Potatoes, which is/uses a Java application (sorry for my poor technical vocabulary). It is installed and extracted. I have found guidelines about how to use it here (it is in German but the instructions for the terminal are clear). But it seems I cannot install any Java package. I have tried all the packages the terminal says are available and this is what terminal says: "Unable to find the package". In ubuntu I use Hot Potatoes with wine, but I cannot install it in the Asus, so I need to run it with java. Thanks for your help.

    Read the article

  • Facing Problems While Installing Java

    - by user100381
    First When i downloaded java from official website i got confused how to install it. den i searched it on software center and i got it. but wen i install it, it starts but instantly stops and the line highlighting the installation status in progress tab doesn't move forward.den i searched on internet and tried installing it by terminal but he terminal says that u have to first configure something that i dont know but it tells me to run this command-"sudo dpkg-configure -a" and when i run this command the terminal process stops in the middle and even after leaving it for about an hour it doesn't proceed further.. after that when i press the close button of the terminal if shows that some tasks are in progress and closing the terminal would...bla bla bla... so i am greatly confused because even other software's like gimp image editor and all are not getting installed.. please help me..!!

    Read the article

  • 12.04 + Alienware M11x R2 + Bumblebee 3.0 = low resolution only

    - by user89171
    I had a fresh install of Ubuntu 12.04 on my Alienware M11x, and it worked with the native monitor resolution of 1366x768. In trying to get the Optimus chipset working, I installed Bumblebee 3.0. Now, I am only offered 640x480 for my monitor resolution. Graphically, Unity 3D appears to be working now, instead of the Unity 2D I had before, so something went right, but I don't know how I can get it to offer me any higher resolutions than 640x480. I've looked up many pages that address this topic, but nothing that I've seen suggested has worked. sudo add-apt-repository ppa:bumblebee/stable sudo apt-get update sudo apt-get install bumblebee-nvidia was the latest thing I tried. I've tried some variants of this, I've been sure to uninstall nvidia drivers prior to reinstalling Bumblebee and various video drivers. Does anyone have any clue as to how I can get back to native resolution?

    Read the article

  • ASUS VX-6 Laptop Wireless not connecting

    - by user2152790
    Someone posted a script a couple days ago, here is my output.Pastebin I can see wifi SSIDs in network, but cannot connect to mine. The only time wifi worked on 13.10 was in the Live CD, but wifi stopped working as soon as install process started. Did below but made no difference. sudo apt-get install bcmwl-kernel-source sudo modprobe -rv brcmsmac sudo modprobe -v wl What I do next? I tried Software&Updates and it showed 1 proprietary driver in use. This sounds like a WPA/WPA2 issue? Wifi works when I tried Zorin OS 7.1, wifi always worked in windows 7.

    Read the article

< Previous Page | 346 347 348 349 350 351 352 353 354 355 356 357  | Next Page >