Search Results

Search found 11048 results on 442 pages for 'concrete syntax tree'.

Page 351/442 | < Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >

• Can I recover a zpool after it's been exported, given that devices have not been reallocated?

  - by cali-spc

  I had a zpool we'll call 'testpool'. testpool had 3 devices included in it, and a single zfs called 'test'. I needed to move 'test' to a new, smaller pool. I wanted to name the new pool the same name 'testpool'. Basically did the following. zfs send testpool@backup > /tmp/test-dump zpool export -f testpool zpool create -f testpool newdevice zfs receive -F testpool < /tmp/test-dump Unfortunately I found out that the testpool@backup snapshot was the wrong snapshot. Too old. I have yet to reallocate the three devices that were in the OLD testpool. (None of these 3 devices are 'newdevice', they are a separate 3.) Is there any way I can recover data in those devices? I'm thinking since I named the new, smaller pool the same as the old zpool, I'm pretty much SOL. But if not, that would be nice to know. Edit: More info I did a 'zpool import' and got this. bash-3.00# zpool import pool: testpool id: 14781458723915654709 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: testpool ONLINE c5t8d0 ONLINE c5t9d0 ONLINE c5t10d0 ONLINE So I'm guessing I just need the syntax to import this zpool using its numeric identifier, while giving it a new name. S.

  Read the article

• Excel 2007 pivot table does not aggregate properly

  - by Patrick

  I am using a an excel pivot table to summarize some data and just found a problem. The problem deals with how aggregate values are calculated. Let's say I have a table of data with three columns: Name, Date, Value. If I create a table where Name and then Date are used as Row Labels and Value is the aggregate value, ie Average. The pivot table will look something like this: +John .3450 5/14/2010 1.234 5/15/2010 3.450 5/16/2010 -3.25 What I think should be happening here is that the values for each date are averaged and then those values are averaged to come up with the value in the same row as the Name, John. But that is not what it does. It takes the average for each date, which it shows across from the date, but then instead of taking the average of those numbers, it actually uses the raw data and computes the average for all of John's values. It should show the average of the daily averages to correspond with the tree hierarchy, but instead just shows me the average for all of John's values. It essential will only aggregate at one level, but visually creates sub levels that it is not using. Does anyone know how to change this or understand by what logic this makes sense? Why would I create any sub groupings if I cannot compute aggregates on them?

  Read the article

• knife on Windows inconsistently reads ~\.ssh\knife.rb on Management Workstation

  - by gWaldo

  I am implementing a new instance of (Open-source v10.12) Chef in an existing environment. Currently the environment is mostly Windows, but more Linux is being introduced. I have used Chef in a previous gig, however that was a *nix-only environment. Because this is a primarily-Windows environment, my main workstation is Windows 7 (x64), and I use Powershell as my main terminal. I created a ~\.chef directory, populated with a knife.rb and my client.pem file. When I run knife client list from ~, I get the expected results. I keep my work in Dropbox just in case my laptop should fail or be stolen. When I run knife client list from the repo directory (C:\Users\waldo\Dropbox_company\projects\chef`), I get ERROR: Your private key could not be loaded from C:/home/waldo/.chef/waldog.pem Check your configuration file and ensure that your private key is readable (Note that the path is incorrect) This is the progression as I walk up the tree towards my ~ running knife client list: C:\Users\waldo\Dropbox\_company\projects\ => Above error C:\Users\waldo\Dropbox\_company\ => Above error C:\Users\waldo\Dropbox\ => It works! (Expected results) C:\Users\waldo\ => Expected results C:\Users\waldo\Documents\ => Expected Results C:\Users\waldo\Documents\GitHub => Expected Results C:\Users\waldo\Documents\GitHub\aProject\ => Expected Results What. The. Eff! Now, I know that I can add -c path\to\knife.rb, but that's a HUGE PITA. Question is: Why is knife inconsistently reading my ~\.chef\knife.rb, and how can I get around that without incurring carpal tunnel?

  Read the article

• Unattended Kickstart Install

  - by Eric

  I've looked around quite a bit and have seen similar setup and questions, but none seem to work for me. I'm using the following command to create a custom ISO: /usr/bin/livecd-creator --config=/usr/share/livecd-tools/test.ks --fslabel=TestAppliance --cache=/var/cache/live This works great and it creates the ISO with all of the packages and configs I want on it. My issue is that I want the install to be unattended. However, every time I start the CD, it asks for all of the info such as keyboard, time zone, root password, etc. These are my basic settings I have in my kickstart script prior to the packages section. cdrom install autopart autostep xconfig --startxonboot rootpw testpassword lang en_US.UTF-8 keyboard us timezone --utc America/New_York auth --useshadow --enablemd5 selinux --disabled services --enabled=iptables,rsyslog,sshd,ntpd,NetworkManager,network --disabled=sendmail,cups,firstboot,ip6tables clearpart --all So after looking around, I was told that I need to modify my isolinux.cfg file to either do "ks=http://X.X.X.X/location/to/test.ks" or "ks=cdrom:/test.ks". I've tried both methods and it still forces me to go through the install process. When I tail the apache logs on the server, I see that the ISO never even tries to get the file. Below are the exact syntax I'm trying on my isolinux.cfg file. label http menu label HTTP kernel vmlinuz0 append initrd=initrd0.img ks=http://192.168.56.101/files/test.ks ksdevice=eth0 label localks menu label LocalKS kernel vmlinuz0 append initrd=initrd0.img ks=cdrom:/test.ks label install0 menu label Install kernel vmlinuz0 append initrd=initrd0.img root=live:CDLABEL=PerimeterAppliance rootfstype=auto ro liveimg liveinst noswap rd_NO_LUKS rd_NO_MD rd_NO_DM menu default EOF_boot_menu The first 2 give me a "dracut: fatal: no or empty root=" error until I give it a root= option and then it just skips the kickstart completely. The last one is my default option that works fine, but just requires a lot of user input. Any help would be greatly appreciated.

  Read the article

• Why Is Volume Shadow Copy Services stopping?

  - by David Mackintosh

  I am running Windows 7 Professional, 64-bit. I am running a backup-over-the-internet software client which depends on the Volume Shadow Copy Services running. Since I installed Service Pack 1 (or rather, didn't object when Windows Update forced Service Pack 1 on me) the backup service is failing to back everything up because VSC isn't running. Most of the time it fails to back up such noise as the Security Essentials database or the Messenger Live contact list -- stuff I really don't care about -- but I don't want to fall into the trap of accepting an Error-state backup as "normal". At the recommendation of the backup software, I have set the VSC service startup mode to be Automatic. When I look in the Event Log, System channel I can see at boot time: The Volume Shadow Copy service entered the running state. ...and then two or three minutes later: The Volume Shadow Copy service entered the stopped state. How do I figure out why VSC is stopping? At the suggestion of the backup vendor, I have already followed the suggestions from http://support.microsoft.com/default.aspx/kb/940184 net stop SENS net stop EventSystem net start EventSystem net start SENS net stop COMSysApp net stop SwPrv net stop VSS cd /d C:\Windows\system32 regsvr32 ole32.dll /s regsvr32 oleaut32.dll /s regsvr32 vss_ps.dll /s vssvc /register /s regsvr32 /i swprv.dll /s regsvr32 /i eventcls.dll /s regsvr32 es.dll /s regsvr32 stdprov.dll /s regsvr32 vssui.dll /s regsvr32 msxml.dll /s regsvr32 msxml3.dll /s regsvr32 msxml4.dll /s net start SwPrv net start VSS net start ProtectedStorage ...and per http://support.microsoft.com/kb/940184 I have deleted the key tree HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\EventSystem\{26c409cc-ae86-11d1-b616-00805fc79216}\Subscriptions I have also run chkdsk /F and chkdsk /R on both permanent hard disks. (I had a similar problem with another computer (same OS, same failure, same start point after SP1 install) but the problem went away when I forced Volume Shadow Copy Services to Automatic startup rather than Manual. I did not have to resort to following the Microsoft KB instructions.)

  Read the article

• WAMP server won't run with PHP 5.3.4 but will with PHP 5.2.11

  - by Ben Williams

  I have a 64bit Windows 7 Professional machine. I'm running WampServer Version 2.1 with Apache 2.2.4. It was installed on a clean machine. I'm using the default ini/conf files as they come. Wamp is installed in C:\wamp\, with php5.2 at C:\wamp\bin\php\php5.2.11 and php5.3 at C:\wamp\bin\php\php5.3.4. Both folders have the same permissions. When I run WAMP with 5.2.11 picked, it starts fine. When I run it with 5.3.4 picked, there are no errors in the Apache or PHP error logs, but I get The Apache service named reported the following error: httpd.exe: Syntax error on line 115 of C:/wamp/bin/apache/apache2.2.4/conf/httpd.conf: Cannot load C:/wamp/bin/php/php5.3.4/php5apache2_2.dll into server: The Apache service named is not a valid Win32 application. in my system application error logs. 5.2.11 calls C:/wamp/bin/php/php5.2.11/php5apache2_2.dll and that doesn't throw an error. What am I doing wrong?

  Read the article

• SVN hangs on commit - any suggestions for troubleshooting?

  - by Richard Beier

  We're having a problem with SVN... Subversion clients such as TortoiseSVN hang when we commit any more than a few files at a time to our server. Everything appears to actually be committed successfully to the repository; but the client hangs after all the data has been transmitted. We're using version 1.4.4 of the SVN server. We use the svn:// protocol rather than http to connect. We've reproduced this problem with several clients: TortoiseSVN (1.6.10), AnkhSVN (2.1), and the Silk command-line client (1.6.12). This is happening for everyone on the team, though some people seem to be more affected than others. If someone commits only a few files, it often works; but with more than half a dozen files, it usually hangs. Does anyone have troubleshooting suggestions? This has been happening sporadically for a while, but it's become pretty consistent lately. We've been working around the issue by killing the hung SVN client, doing "svn cleanup", and then doing "svn up"; but sometimes that causes tree conflicts. Another workaround is to blow away the workspace and check it out again after every commit; but of course that's pretty annoying. Are there any diagnostics that could help us troubleshoot this? We're considering upgrading to SVN 1.6 server, and installing the server on a new machine; but we're wondering if there's an easier solution. Thanks for your help, Richard

  Read the article

• Adding a Printer to my Print Server Failing

  - by Rudi Kershaw

  So, on the Windows Server page I read the following. Step 4: Add Network Printers Automatically Print Management (Printmanagement.msc) can automatically detect all the printers that are located on the same subnet as the computer on which you are running Print Management, install the appropriate printer drivers, set up the queues, and share the printers. To automatically add network printers to a printer server Open the Administrative Tools folder, and then double-click Print Management. In the Printer Management tree, right-click the appropriate server, and then click Add Printer. On the Printer Installation page of the Network Printer Installation Wizard, click Search the network for printers, and then click Next. If prompted, specify which driver to install for the printer. So, I have got to this point, made sure the printer (Canon MP620) is on and correctly plugged into the network. However, when I click "Search the network for printers", the wizard doesn't find it. Now, I can't get any further. Is there anything I could be doing wrong? How should I proceed moving forwards?

  Read the article

• Trouble getting latest version of Git

  - by TheMethod

  I am using Ubuntu 10.04 LTS. I'm looking at using git as source control for personal projects and Github as a remote repository. I was having trouble pushing a commit to my remote github repo getting the following error message: The requested URL returned error: 403 while accessing https://github.com/Jstall/helloworld.git/info/refs When I did some digging I found that the problem could be me not having the latest version of Git. When I did a --version I found that I have version 1.7.0.4 locally. So I tried to update git using: sudo apt-get install git but get the following error: Reading package lists... Done Building dependency tree Reading state information... Done Package git is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package git has no installation candidate I've tried running: sudo apt-get update and trying again but it didn't seem to make a difference. I'm not sure if it's relevant but I'm also getting a couple of 404's when I run update: Err http://wine.budgetdedicated.com edgy/main Packages 404 Not Found Fetched 4,117B in 0s (5,142B/s) W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/edgy/universe/binary-i386/Packages.gz 404 Not Found [IP: 91.189.91.15 80] W: Failed to fetch http://wine.budgetdedicated.com/apt/dists/edgy/main/binary-i386/Packages.gz 404 Not Found I'm not sure when I should try next. Could anyone suggest a course of action to get this resolved? Any advice would be appreciated. Thanks much!

  Read the article

• Thundrbird 3: can't change column width?

  - by rumtscho

  I recently installed Thunderbird 3.0.3. Just noticed a suboptimal UI setting: in the upper pane, which lists the e-mails in the current folder, the Date column is about 200px wide. So when I keep the window at 480x600, all I see in a row is: | tree icon | favourites icon | attachment icon | read icon | junk icon | Date and time, followed by 5cm whitespace | ... | P Where "P" is the first letter of the name of the sender. And the "..." is actually shown this way, I have no idea which column it is meant to be. But I don't see neither the sender, nor the message subject, which makes scrolling a folder for a certain mail rather pointless. I see these when I maximize the window, actually the columns are then not only bigger, they are arranged in another sequence. But I feel that holding a mail client permanently maximised at 1600x1200 is a waste of screen real estate. My naive solution attempt was to try to go with the mouse cursor to the right edge of the date column and try to shrink it by moving the cursor left while holding down the left mouse button. Not only is this default behaviour for all resizable columns I've ever encountered in GUIs, the cursor actually turns into a horizontal double-headed arrow. But pulling has no effect at all. I cannot make a wide column narrow, and I cannot make the narrow columns wide. I didn't find anything in the preferences either. So can please somebody explain how to get the columns arranged sensibly?

  Read the article

• Removing/modifying LDAP objectclasses/attributes using olc

  - by Foezjie

  I'm having trouble using openldap's olc to modify a schema without shutting down the server. To test some things out, I made the following schema: objectIdentifier tests orgUlyssisOID:4 objectIdentifier testAttribute tests:1 objectIdentifier testObjectClass tests:2 attributeType ( testAttribute:1 NAME 'attr1' DESC 'attribuut 1' SYNTAX '1.3.6.1.4.1.1466.115.121.1.40' ) attributeType ( testAttribute:2 NAME 'attr2' DESC 'attribuut 2' SUP userPassword SINGLE-VALUE ) objectclass ( testObjectClass:1 NAME 'class1' DESC 'objectclass 1' SUP top STRUCTURAL MUST (attr1 $ attr2 ) ) And added it to a new schema called test. (cn={9}test.ldif in cn=schema). Now I can't seem to figure out how to delete class1 from that schema. I use the following LDIF (and tried lots of variations too, to no avail) dn : cn={9}test,cn=schema,cn=config changetype: modify delete: olcObjectClasses olcObjectClasses: ( testObjectClass:1 NAME 'class1' DESC 'objectclass 1' SUP top STRUCTURAL MUST ( attr1 $ attr2 ) ) Running ldapmodify -x -W -D cn=admin,cn=config -f test.ldif -d 0 gives no output. -d 1 gives this: ldap_create ldap_sasl_bind ldap_send_initial_request ldap_new_connection 1 1 0 ldap_int_open_connection ldap_connect_to_host: TCP localhost:389 ldap_new_socket: 4 ldap_prepare_socket: 4 ldap_connect_to_host: Trying 127.0.0.1:389 ldap_pvt_connect: fd: 4 tm: -1 async: 0 ldap_open_defconn: successful ldap_send_server_request ber_scanf fmt ({it) ber: ber_scanf fmt ({i) ber: ber_flush2: 38 bytes to sd 4 ldap_result ld 0x7f2a8ccf3430 msgid 1 wait4msg ld 0x7f2a8ccf3430 msgid 1 (infinite timeout) wait4msg continue ld 0x7f2a8ccf3430 msgid 1 all 1 ** ld 0x7f2a8ccf3430 Connections: * host: localhost port: 389 (default) refcnt: 2 status: Connected last used: Mon Sep 10 11:29:57 2012 ** ld 0x7f2a8ccf3430 Outstanding Requests: * msgid 1, origid 1, status InProgress outstanding referrals 0, parent count 0 ld 0x7f2a8ccf3430 request count 1 (abandoned 0) ** ld 0x7f2a8ccf3430 Response Queue: Empty ld 0x7f2a8ccf3430 response count 0 ldap_chkResponseList ld 0x7f2a8ccf3430 msgid 1 all 1 ldap_chkResponseList returns ld 0x7f2a8ccf3430 NULL ldap_int_select read1msg: ld 0x7f2a8ccf3430 msgid 1 all 1 ber_get_next ber_get_next: tag 0x30 len 12 contents: read1msg: ld 0x7f2a8ccf3430 msgid 1 message type bind ber_scanf fmt ({eAA) ber: read1msg: ld 0x7f2a8ccf3430 0 new referrals read1msg: mark request completed, ld 0x7f2a8ccf3430 msgid 1 request done: ld 0x7f2a8ccf3430 msgid 1 res_errno: 0, res_error: <>, res_matched: <> ldap_free_request (origid 1, msgid 1) ldap_parse_result ber_scanf fmt ({iAA) ber: ber_scanf fmt (}) ber: ldap_msgfree ldap_free_connection 1 1 ldap_send_unbind ber_flush2: 7 bytes to sd 4 ldap_free_connection: actually freed So no real indication of an error. Where am I doing it wrong? Bonus question: If I have some entries of a certain objectclass, can I modify it (add/remove attributeTypes) without removing the entries? Thanks in advance for all help.

  Read the article

• How do I install mod_dav_svn module on an Apache / MAMP server?

  - by fettereddingoskidney

  How do I install additional modules into my server configuration? Currently all of the other modules are installed in /Applications/MAMP/Library/modules...and I see that they are mod_*.so source files, but I cannot seem to get mine to end up here... :? I am trying to set up an SVN repository and use my Apache (MAMP) server to serve the repository. I am using the subversion installation that came (pre-installed?) on Mac OS X 10.5. The repository is working, but I cannot access it remotely through my MAMP server using a client program (Dreamweaver CS5). When I try, I get an error from Dreamweaver, saying: Cannot connect to host xxx: Connection refused. This, I believe, is because I have not properly configured my Apache server to serve the svn repository. So, I added the following lines to my httpd.conf file: <Location /subversion> DAV svn SVNPath /Applications/MAMP/htdocs/svn/ AuthType Basic AuthName "Subversion repository" AuthUserFile /applications/mamp/htdocs/.htpasswd Require ServerAdmin </Location> Restarted the server with the command $ /Applications/MAMP/Library/bin/apachectl -k restart I used this path because otherwise the default apachectl path is set to /usr/sbin/apachectl, which is the location of the pre-installed command on Mac OS X, since the OS comes packaged with a built-in Apache server. And I get the error: Syntax error on line 1153 of /Applications/MAMP/conf/apache/httpd.conf: Unknown DAV provider: svn I checked the upper portion of httpd.conf and see that dav_module (mod_dav.so) is loaded and is in fact in my the modules directory of my server. However, mod_dav_svn is not installed in that directory nor is it in the LoadModule portion of httpd.conf. So I need to install it, right? I have tried installing modules into my MAMP server before but was never successful...because I don't know how to do it. Can someone please walk me through how to install that module? Thanks for your time!

  Read the article

• Why is crontab giving "No such file or directory" error when the file DOES exist?

  - by fettereddingoskidney

  I am getting the following three lines in an error message in /var/mail/username after the following job runs in crontab... 15 * * * * /Applications/MAMP/htdocs/iconimageryidx/includes/insertPropertyRESI.php Errors: /applications/mamp/htdocs/iconimageryidx/includes/insertpropertyRESI.php: line 1: ?php: No such file or directory /applications/mamp/htdocs/iconimageryidx/includes/insertpropertyRESI.php: line 3: syntax error near unexpected token `'initialize.php'' /applications/mamp/htdocs/iconimageryidx/includes/insertpropertyRESI.php: line 3: `require_once('initialize.php'); The PHP script I am trying to execute DOES in fact exist, and I have made absolutely sure the spelling is correct several times. I ran a crontab on another script before and it worked just fine...any ideas?? The 2nd & 3rd Errors are from line 3 in the following script (the one I am trying to run with the crontab): <?php require_once('initialize.php'); require_once('insertPropertyTypes.php'); $sDate; if(isset($_GET['startDate'])) { $sDate = $_GET['startDate']; } else { $sDate = ''; } $insertResi = new InsertPropertyTypes('Listing', $sDate, 'RESI'); ?> When I run my script insertPropertyRESI.php in the browser, it runs just fine???? Also, initialize.php and insertPropertyTypes.php are in the same directory as insertPropertyRESI.php I am using MAMP with PHP 5.3.5 thakns for the help :?

  Read the article

• Error related to pkg-config when installing frei0r as part of another package

  - by Anentropic

  I am trying to build https://github.com/mltframework/shotcut on OS X Lion (using their script in scripts/build_shotcut.sh) and after numerous hurdles I'm stuck on this error: ./configure: line 16062: syntax error near unexpected token `OPENCV,' ./configure: line 16062: `PKG_CHECK_MODULES(OPENCV, opencv >= 1.0.0, HAVE_OPENCV=true, true)' ERROR: Unable to configure frei0r From what I already googled this means that the PKG_CHECK_MODULES macro hasn't been defined, which probably means there's something wrong with my pkg-config, which I installed via Homebrew. Sounds like the pkg.m4 file isn't found. When I brew install pkg-config I get the following warning: Warning: m4 macros were installed to "share/aclocal". Homebrew does not append "/usr/local/share/aclocal" to "/usr/share/aclocal/dirlist". If an autoconf script you use requires these m4 macros, you'll need to add this path manually. Well I've appended that line to the dirlist file and it doesn't fix the problem above. Can anyone suggest a way forward here? I have briefly tried building my own pkg-config from source but (bizarrely) when I tried to ./configure I got the following error: checking for pkg-config... no ./configure: line 13540: --exists: command not found configure: error: pkg-config and glib-2.0 not found, please set GLIB_CFLAGS and GLIB_LIBS to the correct values if building pkg-config needs pkg-config it seems like a weird catch 22 situation... I think this is probably an unnecessary sidetrack anyway.

  Read the article

• Why is lighttpd and fastcgi keeping sending me the *.scgi file instead of the website content?

  - by e-satis

  I have the following config: server.modules = ( "mod_compress", "mod_access", "mod_alias", "mod_rewrite", "mod_redirect", "mod_secdownload", "mod_h264_streaming", "mod_flv_streaming", "mod_accesslog", "mod_auth", "mod_status", "mod_expire", "mod_fastcgi" ) [...] fastcgi.server = ( ".php" => (( "bin-path" => "/usr/bin/php-cgi", "socket" => "/var/tmp/lighttpd/php-fastcgi.socket" + var.PID, "max-procs" => 1, "kill-signal" => 9, "idle-timeout" => 10, "bin-environment" => ( "PHP_FCGI_CHILDREN" => "200", "PHP_FCGI_MAX_REQUESTS" => "1000" ), "/pyapps/essai/blondes.fcgi" => ( "main" => ( "socket" => "/var/tmp/lighttpd/django-fastcgi.socket", ), ), "bin-copy-environment" => ( "PATH", "SHELL", "USER" ), "broken-scriptfilename" => "enable" ))) [...] $HTTP["host"] =~ "(^|www\.)cam\.com(\:[0-9]*)?$" { server.document-root = "/home/cam/web/" accesslog.filename = "/home/cam/log/access.log" server.errorlog = "/home/cam/log/error.log" server.follow-symlink = "enable" # files to check for if .../ is requested server.indexfiles = ( "index.php", "index.html", "index.htm", "index.rb") url.rewrite = ( "^(/blondes/.*)$" => "/pyapps/essai/blondes.fcgi$1" ) } I have the following dir tree: /home/tv/web/ `-- pyapps `-- essai `-- __init__.py `-- blondes.fcgi `-- blondes.pid `-- django-fcgi.py `-- manage.py `-- manage.pyo `-- plop `-- settings.py `-- urls.py No error when restarting lighthttpd. The I run: ./manage.py runfcgi method=prefork socket=/var/tmp/lighttpd/django-fastcgi.socket daemonize=false pidfile=blondes.pid No errors neither. I then go to http://cam.com/blondes/. I offers me to download an empty file. I checked permissions but everything is set to the same user and group, and they work for the PHP site. The file /var/tmp/lighttpd/django-fastcgi.socket exists. When I reload the page, I got no output in error logs, nor in the manage.py runfcgi command. I probably missed something obvious, but what ?

  Read the article

• Python not Working in Vim

  - by jdg

  I have a new install of VIM from the automatic windows installer: gvim73_46.exe I have Python 2.7 (32 bit) installed. If I open gvim, and type: :set python? I get E518: Unknown option. If I try typing: :python 'hello' Vim crashes. What could be wrong? Here are the contents of :version in case they are helpful, although python is installed, and it is using Python 2.7. I also checked, and C:\Windows\System32\python27.dll is where it should be... I am really lost here. Does anyone have any ideas as to what is going wrong? VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Oct 27 2010 17:59:02) MS-Windows 32-bit GUI version with OLE support Included patches: 1-46 Compiled by Bram@KIBAALE Big version with GUI. Features included (+) or not (-): +arabic +autocmd +balloon_eval +browse ++builtin_terms +byte_offset +cindent +clientserver +clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments +conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con_gui +diff +digraphs -dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path +find_in_path +float +folding -footer +gettext/dyn -hangul_input +iconv/dyn +insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent +listcmds +localmap -lua +menu +mksession +modify_fname +mouse +mouseshape +multi_byte_ime/dyn +multi_lang -mzscheme +netbeans_intg +ole -osfiletype +path_extra +perl/dyn +persistent_undo -postscript +printer -profile +python/dyn +python3/dyn +quickfix +reltime +rightleft +ruby/dyn +scrollbind +signs +smartindent -sniff +startuptime +statusline -sun_workshop +syntax +tag_binary +tag_old_static -tag_any_white +tcl/dyn -tgetent -termresponse +textobjects +title +toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo +vreplace +wildignore +wildmenu +windows +writebackup -xfontset -xim -xterm_save +xpm_w32 system vimrc file: "$VIM\vimrc" user vimrc file: "$HOME_vimrc" 2nd user vimrc file: "$VIM_vimrc" user exrc file: "$HOME_exrc" 2nd user exrc file: "$VIM_exrc" system gvimrc file: "$VIM\gvimrc" user gvimrc file: "$HOME_gvimrc" 2nd user gvimrc file: "$VIM_gvimrc" system menu file: "$VIMRUNTIME\menu.vim" Compilation: cl -c /W3 /nologo -I. -Iproto -DHAVE_PATHDEF -DWIN32 -DFEAT_CSCOPE -DFEAT_NETBEANS_INTG -DFEAT_XPM_W32 -DWINVER=0x0400 -D_WIN32_WINNT=0x0400 /Fo.\ObjGOLYHTR/ /Ox /GL -DNDEBUG /Zl /MT -DFEAT_OLE -DFEAT_MBYTE_IME -DDYNAMIC_IME -DFEAT_GUI_W32 -DDYNAMIC_ICONV -DDYNAMIC_GETTEXT -DFEAT_TCL -DDYNAMIC_TCL -DDYNAMIC_TCL_DLL=\"tcl83.dll\" -DDYNAMIC_TCL_VER=\"8.3\" -DFEAT_PYTHON -DDYNAMIC_PYTHON -DDYNAMIC_PYTHON_DLL=\"python27.dll\" -DFEAT_PYTHON3 -DDYNAMIC_PYTHON3 -DDYNAMIC_PYTHON3_DLL=\"python31.dll\" -DFEAT_PERL -DDYNAMIC_PERL -DDYNAMIC_PERL_DLL=\"perl512.dll\" -DFEAT_RUBY -DDYNAMIC_RUBY -DDYNAMIC_RUBY_VER=191 -DDYNAMIC_RUBY_DLL=\"msvcrt-ruby191.dll\" -DFEAT_BIG /Fd.\ObjGOLYHTR/ /Zi Linking: link /RELEASE /nologo /subsystem:windows /LTCG:STATUS oldnames.lib kernel32.lib advapi32.lib shell32.lib gdi32.lib comdlg32.lib ole32.lib uuid.lib /machine:i386 /nodefaultlib gdi32.lib version.lib winspool.lib comctl32.lib advapi32.lib shell32.lib /machine:i386 /nodefaultlib libcmt.lib oleaut32.lib user32.lib /nodefaultlib:python27.lib /nodefaultlib:python31.lib e:\tcl\lib\tclstub83.lib WSock32.lib e:\xpm\lib\libXpm.lib /PDB:gvim.pdb -debug

  Read the article

• OS X can connect to Windows machine, but can't access shared folders

  - by Bonnie

  I can create new folders on my Windows XP machine, set them to "shared". On my Mac, I pick Finder → Go → Connect to Server → smb://192.168.1.4 → Connect → Name / Password. It even shows me all the names of the newly created shared-folders on my PC, but when I try to actually connect to any of them I get connection failed, there was an error connecting Any idea on what would cause that? The fact that it successfully gets so far—to actually showing me my PC share-names—must mean I have 99% of this working correctly, i.e. the physical connection, the IP address, the user name, the password, etc. Still, I can't seem to access the folders themselves. I've tried this with my Windows XP firewall on/off, and Norton AntiVirus on/off. Same problem. Everything did work fine, 4 months ago. Were there any odd OS X or Windows updates released recently? I always apply them all. smbclient on the Mac does correctly find the XP machine, my XP user name, and accepts my XP password. I get the following from that smbclient command: Doing spnego session setup (blob length=16) server didn't supply a full spnego negprot Got challenge flags: ... Got NTLMSSP flags: ... Got NTLMSP flags: ... Domain=[XPMACHINE] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager] tree connect failed: NT_STATUS_INSUFF_SERVER_RESOURCES I'm not sure why a standard XP box can't "supply a full spnego negprot". Whatever that means. Using XP's RegEdit to change my IRPStackSize from 11... to 13, 15, 20, 22... still gives that "NT_STATUS_INSUFF_SERVER_RESOURCES" error on the Mac.

  Read the article

• Excel concatenate strings from cells listed in third cell

  - by Puddingfox

  I have an excel 2007 workbook that has five columns: A. A list of machines B. A list of service numbers for each machine C. A list of service names for each machine ...(nothing here) I. A list of Service Numbers J. A list of Service Names Each machine listed in column A has one or more services running on it from the list in column J. I would like to be able to add services to a machine (i.e. updating the cell in Column C) by simply adding another comma-separated number to Column B. For Example, The first row would look like this assuming Machine1 has the first three services: | A | B | C | Machine1 | 1,2,3 | HTTP,HTTPS,DNS Right now I have to manually update the formula in column c for each change I make. The current formula is: =CONCATENATE(J1,",",J2,",",J3) I would like to use something like this (please forgive my syntax; I'm a coder and I'm treating cell B1 as if it is an indexed array): =CONCATENATE(CELL("J"+B1[0] , "," , "J"+B1[1] , "," "J"+B1[2]) Although having variable numbers of services makes this even more difficult. Is there any way of doing this. For reference, this is columns I and J: | I | J | 1 |HTTP | 2 |HTTPS | 3 |DNS ..... | 16 |Service16 I don't know very much about Excel so any help is greatly appreciated.

  Read the article

• Apache22 on FreeBSD - Starts, does not respond to requests

  - by NuclearDog

  Hey folks! I'm running Apache 2.2.17 with the peruser MPM on FreeBSD 8.2-RC1 on Amazon's EC2 (so it's XEN). It was installed from ports. My problem is that, although Apache is running, listening for, and accepting connections, it doesn't actually respond to any or show them in the log at all. If I telnet to the port it's listening on and type out an HTTP request: GET / HTTP/1.1 Host: asdfasdf And hit enter a couple of times, it just sits there... Nothing. No response requesting with a browser either. There doesn't appear to be anything helpful in the error log: [Sun Jan 09 16:56:24 2011] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Sun Jan 09 16:56:25 2011] [notice] Digest: generating secret for digest authentication ... [Sun Jan 09 16:56:25 2011] [notice] Digest: done [Sun Jan 09 16:56:25 2011] [notice] Apache/2.2.17 (FreeBSD) mod_ssl/2.2.17 The access log stays empty: root:/var/log# wc httpd-access.log 0 0 0 httpd-access.log root:/var/log# I've tried with accf_http and accf_data both enabled and disabled, and with both the stock configuration and my customized config. I also tried uninstalling apache22-peruser-mpm and just installing straight apache22... Still no luck. I tried removing all of the LoadModule lines from httpd.conf and just re-enabled the ones that were necessary to parse the config. Ended up with only the following loaded: root:/usr/local/etc/apache22# /usr/local/sbin/apachectl -M Loaded Modules: core_module (static) mpm_peruser_module (static) http_module (static) so_module (static) authz_host_module (shared) log_config_module (shared) alias_module (shared) Syntax OK root:/usr/local/etc/apache22# Same results. Apache is definitely what's listening on port 80: root:/usr/local/etc/apache22# sockstat -4 | grep httpd root httpd 43789 3 tcp4 6 *:80 *:* root httpd 43789 4 tcp4 *:* *:* root:/usr/local/etc/apache22# And I know it's not a firewall issue as there is nothing running locally, and connecting from the local box to 127.0.0.1:80 results in the same issue. Does anyone have any idea what's going on? Why it would be doing this? I've exhausted all of my debugging expertise. :/ Thanks for any suggestions!

  Read the article

• Win7 System folder contains infinitely looping SYSTEM(!) directory

  - by Matt

  My Windows 7 Enterprise computer has been crashing fairly frequently recently, so I decided to boot up in safe mode and run the TrendMicro client I have installed. It froze about 10 minutes into the full system scan, so in the spirit of http://whathaveyoutried.com, I started scanning each folder individually. When I got to ProgramData, the AV failed with an uncaught exception. I then went down a level and tried scanning Application Data, which failed as well. Imagine my surprise when I open the folder just to see the same folder again! As far as I can tell, this folder loop continues indefinitely. (If you are trying to recreate this, keep in mind that ProgramData is a hidden folder.) I'm actually a bit concerned that these are system folders, as this is a brand-new computer with a clean installation. I guess I have three questions: Has anyone else seen/experienced this before? I'm running Win7 SP1. How do I fix this? I've run CHKDSK \F with no success (although it was incredibly slow). What are the ramifications of an infinitely recursive directory? Theoretically speaking, each link takes up memory, so shouldn't I have no space available on my hard drive? (I've got about 180GB left.) I noticed that the tree view on the left only shows the "linked folder" icon on the deeper folders--does this mean anything special? (I've circled the icons or lack thereof in red.) How can the OS even resolve this aberration? And above all, what would happen if I were to select "Expand all folders"??? :P Matt

  Read the article

• Underbraces in Word math zones and dealing with parentheses

  - by Johannes Rössel

  Parentheses in Word usually stretch with whatever they're containing. This might be un-noticeable for things like but for stuff like it's definitely nice, especially compared to the fact that naïve LaTeX users often produce uglinesses such as There is a problem, however, when using under-/overbraces in math and putting parentheses around the complete term it becomes ugly. For simple things like shown here this can be solved by not letting the parentheses stretch which looks almost right. However, for more complex things it's certainly not an option: Both variants look horrible. So is there a way of letting the parentheses only stretch around the actual term parts, not including the under-/overbraces? Those are frequently used for annotations of individual pieces, so simply not using them is a bad idea too. In LaTeX you can get away with guesswork and using explicit sizes for the parentheses instead of relying on \left and \right but I haven't found a comparable option in Word yet. Since the underbrace is (tree-wise) a sibling of the term in parentheses it probably simply has to stretch and there probably can't be an algorithm that determines when to stretch or when not, considering that \above and \below are used for annotations as well but also for other things where perentheses have to stretch. Also, since the parenthesized expression is opaque from the outside one has to put the underbrace inside. From a markup point of view, at least. One can probably draw the rest around but that falls apart when styles change and wouldn't be a good idea either.

  Read the article

• Are there any Graphical PowerShell tools?

  - by Dai

  As a developer for the .NET platform, I like to "explore" a platform, framework or API by browsing through the API documentation which explains what everything is - everything is covered and when I use tools like Reflector or Object Browser then I get to know for certain what I'm working with. When I'm writing my own software I can use tools like the Object Test Bench to explore and work with my classes directly. I'm looking for something similar, but for PowerShell - and ones that avoid text-mode. PowerShell is nice, and there are a lot of cool "discoverability"-things it has, such as the "Verb-Noun" syntax, however when I'm working with Exchange Server, for example, I wanted to get a list of AD Permissions on a Receive Connector and I got this list: [PS] C:\Windows\system32>Get-ADPermission "Client SVR6" -User "NT AUTHORITY\Authenticated Users" | fl User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : False AccessRights : {ExtendedRight} IsInherited : False Properties : ChildObjectTypes : InheritedObjectType : InheritanceType : All User : NT AUTHORITY\Authenticated Users Identity : SVR6\Client SVR6 Deny : True AccessRights : {ReadProperty} IsInherited : True Properties : {ms-Exch-Availability-User-Password} ChildObjectTypes : InheritedObjectType : ms-Exch-Availability-Address-Space InheritanceType : Descendents [PS] C:\Windows\system32> Note how the first few entries contain identical text - there's no way to tell them apart easily. But if there was a GUI presumably it would let me drill-down into the differences better. Are there any tools that do this?

  Read the article

• What steps to take when CPAN installation fails?

  - by pythonic metaphor

  I have used CPAN to install perl modules on quite a few occasions, but I've been lucky enough to just have it work. Unfortunately, I was trying to install Thread::Pool today and one of the required dependencies, Thread::Converyor::Monitored failed the test: Test Summary Report ------------------- t/Conveyor-Monitored02.t (Wstat: 65280 Tests: 89 Failed: 0) Non-zero exit status: 255 Parse errors: Tests out of sequence. Found (2) but expected (4) Tests out of sequence. Found (4) but expected (5) Tests out of sequence. Found (5) but expected (6) Tests out of sequence. Found (3) but expected (7) Tests out of sequence. Found (6) but expected (8) Displayed the first 5 of 86 TAP syntax errors. Re-run prove with the -p option to see them all. Files=3, Tests=258, 6 wallclock secs ( 0.07 usr 0.03 sys + 4.04 cusr 1.25 csys = 5.39 CPU) Result: FAIL Failed 1/3 test programs. 0/258 subtests failed. make: *** [test_dynamic] Error 255 ELIZABETH/Thread-Conveyor-Monitored-0.12.tar.gz /usr/bin/make test -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports ELIZABETH/Thread-Conveyor-Monitored-0.12.tar.gz Running make install make test had returned bad status, won't install without force Failed during this command: ELIZABETH/Thread-Conveyor-Monitored-0.12.tar.gz: make_test NO What steps do you take to start seeing why an installation failed? I'm not even sure how to begin tracking down what's wrong.

  Read the article

• Underbraces in Word math zones and dealing with stretchy parentheses

  - by Johannes Rössel

  Parentheses in Word usually stretch with whatever they're containing. This might be un-noticeable for things like but for stuff like it's definitely nice, especially compared to the fact that naïve LaTeX users often produce uglinesses such as There is a problem, however, when using under-/overbraces in math and putting parentheses around the complete term it becomes ugly. For simple things like shown here this can be solved by not letting the parentheses stretch which looks almost right. However, for more complex things it's certainly not an option: Both variants look horrible. So is there a way of letting the parentheses only stretch around the actual term parts, not including the under-/overbraces? Those are frequently used for annotations of individual pieces, so simply not using them is a bad idea too. In LaTeX you can get away with guesswork and using explicit sizes for the parentheses instead of relying on \left and \right but I haven't found a comparable option in Word yet. Since the underbrace is (tree-wise) a sibling of the term in parentheses it probably simply has to stretch and there probably can't be an algorithm that determines when to stretch or when not, considering that \above and \below are used for annotations as well but also for other things where perentheses have to stretch. Also, since the parenthesized expression is opaque from the outside one has to put the underbrace inside. From a markup point of view, at least. One can probably draw the rest around but that falls apart when styles change and wouldn't be a good idea either.

  Read the article

• What is a good WordPress theme for long Objective-C code samples [closed]

  - by willc2

  As some of you iPhone developers know, Objective-C can be a verbose language. Long, descriptive variable and method names are the norm. I'm not complaining, it makes code easier to read and code completion makes it easy to type. But damn! Check out this method name for getting a cell in a table view: -(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath; I have a WordPress blog where I publish my code samples as I'm learning the language. One thing I hate on other blogs is how the code won't fit in a column without that scroll bar or without wrapping around. It really made it hard for me to read and comprehend method names back when I was a super-noob (six months ago). Right now I use the clean-looking Fazyvo 1.0 theme by noonnoo. I love the look of it but the columns are just too narrow and it doesn't have support for wider ones. I could hand-modify it but then I'd have to maintain/redo those changes every time I updated it. Instead, I'm looking for a nice theme that has width control built-in and looks good at larger font sizes. Can anyone help? Note: I use WP-CodeBox for code syntax highlighting.

  Read the article

< Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >