Search Results

Search found 11687 results on 468 pages for 'ex networking guy'.

Page 351/468 | < Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >

• Troubleshooting Amazon EC2 reboot

  - by tgm

  We've had a server (CentOS) running in EC2 for a few months. It had been going pretty smoothly until today when we got an alarm that the server was unavailable (HTTP service couldn't be reached). So I tried SSHing into the box but that timed out as well. I logged into the EC2 console and it said the instance was running and there wasn't anything in the system log. One odd thing I noticed is that even though we have an Elastic IP attached to it (which shows in the Elastic IP management area), the instance detail is not showing that there is an EIP associated with the instance. I looked through the message log and the last thing I see around the time we got our alert was the dhclient renewed the lease. I'm guessing there may have been some sort of issue with the networking. How might I check if that was the problem, or if there were any other issues that may have caused our instance to stop responding?

  Read the article

• User Profile cannot be loaded - Windows 7

  - by Ryan

  After uninstalling an HP Vector Mouse driver, then rebooting, when Windows tries to auto log me in, i get an error message saying tyhe following: The User Profile Service failed the Login. User Profile cannot be loaded. Due to the fact that it is the only account on this PC, I cannot even go into another account. I rebooted the machine several times, before going into Safe Mode with Networking. For some reason, I cannot create a new account whilst in safe mode (I think it is to do with UAC, nothing with UAC is clickable). Thus, I am stuck. I cannot get into my account, nor can I create a new one to copy files over to. Any ideas? Thanks in advance! Ryan EDIT: System Restore was, for some reason turned off. Thus, I cannot restore to a working point.

  Read the article

• Variable parsing with Bash and wget

  - by Bill Westrup

  I'm attempting to use wget in a simple bash script to grab a jpeg image from an Axis camera. This script outputs a file named JPEGOUT, instead of the desired output, which should be a timestamp jpeg (ex: 201209292040.jpg) . Changing the variable in the wget statement from JPEGOUT to $JPEGOUT makes wget fail with "wget: missing URL" error. The weird thing is wget parses the $IP vairable correctly. No luck on the output file name. I've tried single quotes, double quotes, parenthesis: all to no luck. Here's the script !/bin/bash IP=$1 JPEGOUT= date +%Y%m%d%H%M.jpg wget -O JPEGOUT http://$IP/axis-cgi/jpg/image.cgi?resolution=640x480&compression=25 Any ideas on how to get the output file name to parse correctly?

  Read the article

• How do I install a CentOS 5.5 in Xenserver?

  - by deweller

  When I try to install CentOS 5.5 in a new VM, I get an error that the installer is unable to retrieve stage2.img. I have verified the URL and I am able to download this file from a web browser. I suspect it is a networking/routing issue, but I can't figure out what is wrong. This is a new install of XenServer 5.6 on a new server. This server is remote, so I don't have physical access to the box - only ssh access. Can anyone give me some tips on what might be wrong here? Do I need to do something special to get a net install to work? For what its worth, I see the same error trying to install Debian Woody using a similar process. Thanks.

  Read the article

• How do I turn a router into a wireless bridge

  - by Rob Cowell

  I'm trying to get my HD satellite receiver connected to the internet - it has an Ethernet port on the back but my networking equipment is all upstairs. I had the idea of connecting a spare wireless router to the box with an ethernet cable and getting that wireless router to talk to my "main" wireless router (the one with the ADSL connection) to supply internet access. I believe this entails getting the router to work as a "wireless bridge", but I don't know how to do this. Currently, the ADSL line is hooked up to a NETGEAR DG834G. The other two "spare" wireless routers I have to act as the bridge are :- Huawei HG520b Netgear DGN2000 BT Homehub I'd prefer not to change the "main" router (cos I'm used to its web admin UI) - does anyone know a way I can achieve the connectivity I require with the equipment I have?

  Read the article

• How do I turn a router into a wireless bridge

  - by Rob Cowell

  I'm trying to get my HD satellite receiver connected to the internet - it has an Ethernet port on the back but my networking equipment is all upstairs. I had the idea of connecting a spare wireless router to the box with an ethernet cable and getting that wireless router to talk to my "main" wireless router (the one with the ADSL connection) to supply internet access. I believe this entails getting the router to work as a "wireless bridge", but I don't know how to do this. Currently, the ADSL line is hooked up to a NETGEAR DG834G. The other two "spare" wireless routers I have to act as the bridge are :- Huawei HG520b Netgear DGN2000 BT Homehub I'd prefer not to change the "main" router (cos I'm used to its web admin UI) - does anyone know a way I can achieve the connectivity I require with the equipment I have?

  Read the article

• Windows 7 installation reboot loop

  - by Auswoolf

  Upgrading from Vista home premium to win 7 hoe premium from DVD ex Digital river on gigabyte VM900m; core 2 duo 2.13GHz 2GB ram; Western digital 250GB HD. Got as far as "Expanding Windows files ...100% the error message "Computer encountered unexpected error... To install windows press OK to restart computer and reinstall windows" The computer then reboots, loads Windows 7 (new logo) a essage that says "setup is starting services" then the error message comes back. I can get into BIOS to change boot priority but the computer just ignores this and goes through the same sequence. At the point of "to boot from CD/DVD press any key" my keyboard is deactivated and i cannot make a choice and the sae sequence occurs. I cannot break the sequence - I have push every key, disconnected every external device including HDMI screen, but nothing stops the loop. Any ideas? Auswoolf

  Read the article

• Mod_rewrite display subdomain.domain.com and call domain.com/subdomain/ for SSL

  - by Jeff H.

  I have a website secured by a standard SSL certificate, securing a few different shops under different subdirectories. Ex. domain.com/shop1/ The shops are also accessible via a subdomain e.g. shop1.domain.com. What I'm trying to accomplish: display shop1.domain.com to the user, while keeping all of the actual server calls as domain.com/shop1, so that the secure pages will continue to work properly. (Not sure if I'm using the proper language, exactly, I hope my point is clear.) To be clear: my SSL is working fine, and I don't need help with that, and I don't need or want to purchase a UCC cert. It can't be that difficult for anyone with experience with Apache. (I've spent 3 hours trying to learn about mod_rewrite. It's just not clicking.) I'm on a GoDaddy secure shared server, so please keep in mind that I'm not able to reset the server or anything.

  Read the article

• Unable to access local network when Cisco VPN client is connected

  - by bryanroth

  I'm a developer and don't have much networking expertise, so bear with me. I'm using the Cisco VPN Client 5.0.02.0090 to connect to my work's VPN that way I can RDP into my work computer. Once connected, I can't ping anything on the local network once connected to the VPN thus I am unable to access my work's network. This used to work about two weeks ago but abruptly stopped working today. However, I have the Cisco VPN Client installed on my laptop and I am able to ping and RDP into my work computer from there. Both my desktop and laptop computers are connected to the same router at home. I have tried the following so far: Rebooted my computer Reinstalled VPN client Updated NIC drivers Disabled firewall Opened up ports 500, 4500, and 10000 Any help would be much appreciated. Thanks!

  Read the article

• Restrict IPMI access on Dell BMC and iDRAC to an allowed IP range

  - by edgester

  I'm trying to secure the iDRAC's and BMC's on some of my Dell servers (R210, R410, R510). I want to restrict access to IPMI commands to only a few IP addresses. I've successfully restricted access to the iDrac using the instructions from http://support.dell.com/support/edocs/software/smdrac3/idrac/idrac10mono/en/ug/html/racugc2d.htm#wp1181529 , but the IP restrictions do not affect IPMI. A separate management network is not practical at this time because of lack or ports and some Dell BMC's don't offer a separate port. I'm told by my networking group that our switches don't support trunking, so using the vlan tagging is not an option either. Is there a way restrict the IPMI access to a list of allowed addresses? FYI, for various reasons, I have a mix of Dell servers with BMC's, iDrac Express and iDrac enterprise management features.

  Read the article

• Using watch to run a shell script - but the script goes defunct

  - by PHP-Steven

  So I want to keep an eye on my network connectivity so I can make a report for my ISP. (seems like the modem goes out for about 30-60 seconds about once a day) So I copied this handy little script http://www.cyberciti.biz/tips/simple-linux-and-unix-system-monitoring-with-ping-command-and-scripts.html And an running it with watch -n 15 ./ping-test.sh I have been testing it by pulling the plug on my modem. The first time watch runs the script after the network goes out it runs fine (sends some email) and then goes defunct. Once networking is restored the script "finishes" and then watch runs it again. So I'm getting mail for when the network goes down, but not how long it was down for. If I run the script straight from the command line it runs (emails) and then exits. Any ideas why? How can I get the script to keep running once the network is down?

  Read the article

• DHCP Client Can't Find DHCP Server

  - by leeman24

  I currently have 3 machines: CentOS (router) eth1 - 18.0.168.1 eth2 - 145.165.34.1 Windows Server 2008 (server) 18.0.168.2 DHCP scope - 145.165.34.10 - 145.165.34.20 Windows 7 (client) Supposed to use DHCP I can't get my Windows 7 client to get an address from the Windows Server 2008 DHCP server. Every network interface can ping each other (ex. 18.0.168.2 can ping 18.0.168.1 & 145.165.34.1 and the other way around). My Linux machine acting as the router has default IP tables. Other than this command which may or may not be right: iptables -I INPUT -p udp -d 18.0.168.2 --dport 67:68 -j ACCEPT I have also tried it after I flushed the IP tables. I was looking at the dhcrelay command but it seems CentOS doesn't have it and I am not even sure how to use it.

  Read the article

• Double default gateway ubuntu server

  - by Elena

  I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

  Read the article

• windows is unresponsive but works well in safe mode

  - by kacalapy

  I was installing a few utility apps and things when my laptop running windows 7 stopped responding. I tried to reboot and still very unresponsive... the mouse moves but i am unable to click on icons or open the start menu. eventually things catch up after over a minute. when i start in safe mode with networking support i am able to operate the laptop at lightening speed and web browsing is a dream. I ran msconfig and shut off all non windows services and still get the same thing. after no results i then got and ran spybot, malwarebytes, and other such tools but got no results. they all show nothing wrong. now what?

  Read the article

• AMD Phenom 2 is idling at 50°C, can I get it cooler?

  - by liam

  Is it possible to damage a CPU so that it works, but only at high temperatures? My Phenom 2 1090T is idling at 50°C and I have tried everything to get it down. I can play Deus Ex HR, Arkham City, or Dirt 3 and it hovers around 60. I have cleaned out all my fans: 2 intake (front and side), 1 exhaust (Arctic Freezer). My machine is a brand new Antec 520 high current gamer. Also: Extreme3 770 8 GB Kingston DDR3 (2x4 GB) 750 GB Seagate Barracuda ASUS Xonar DG Radeon HD 5670 New Arctic Freezer Pro Rev 2 (days old and mounted properly with Arctic Silver 5). I also dropped an Athlon 250 dual core into my rig and that ran at under 30. Is the CPU dying? I know that 50°C idle for an AMD is not normal.

  Read the article

• IP tables gateway

  - by WojonsTech

  I am trying to make an iptables gateway. I ordered 3 dedicated server from my hosting company all with dual nics. One server has been given all the ip addresses and is connected directly to the internet and has its other nic connected to a switch where the other servers are all connected also. I want to setup iptables so for example the ip address 50.0.2.4 comes into my gateway server it fowards all the traffic to a private ip address using the second nic. This way the second nic can do what ever it needs and can respond back also. I also want it setup that if any of the other servers needs to download anything over the inernet it is able to do so and by using the same ip address that is used for its incomming traffic. Lastly I would like to be able to setup dns and other needed networking stuff that i maybe not thinking about.

  Read the article

• Terribly slow Apache2 on VM Virtualbox

  - by cadavre

  I just launched VM Virtualbox with guest Ubuntu Server on host Windows 8. Both 64bit. Everything works perfectly fine. Maybe it's because I'm not using any X... Htop shows ~25% of memory usage, everything is fine, but not Apache2. Normally it's fine, but when I send request from my browser on host (networking mode set to Bridge mode), Apache2 is turning into 1-minute-long loading process with 100% CPU time. Any ideas how to debug it? Any ideas about solving this throat problem?

  Read the article

• win xp client, win 7 host, only xp drivers

  - by brett

  I have a win 7 64 bit box which has xp on it in a vmware module and also the win7 version. I can use my old usb wifi card under virtual xp as i have the wifi drivers, but apparently the manufacturing company never made any further drivers, nor did it release the source code. Is it possible to get networking between the client and the host, so that my host can browse etc? I thought the microsoft loopback adapter might be the answer but ever example i can find of it's use describes a setup where the host is connected fine and needs to route data to the client as well.

  Read the article

• How to create Isolated test environment

  - by Safin09

  Hi All, I am very new to the VMware world. We have VMWare vCenter 4 in the production environment but we have created multiple VLAN through Cisco Switch. I want know, how I can create an isolated test environment for software testing purpose only, so anything will happen in that test vLan will not make trouble in the production environment. "Host-only networking" is the solution or there is a better way to achieve this result? My requirements A. Hosts should be able to access Internet and a Network Share drive but not Production network B. Hosts should connect each other inside the Virtual LAN C. I should be able to take automatic or periodic backup or snapshoot and deploy snapshot when necessary. Whatever your answer is, please give me steps, how to do, if possible. If I need to purchase anything, I am ready to do but I don't want to spend big money. Many thanks in advance.

  Read the article

• Is it possible to rate-limit an scp/sftp/rsync/etc transfer from the command-line? ie, manual QoS on

  - by warren

  Specifically, I am looking to rate-limit an scp or sftp session (or other arbitrary network call) in the call itself. For example, let's say I want to copy 100MB to one server, and 1GB to another. I'd like to be able to run both of these at the same time, but maintain a QoS for "normal" computer usage - somewhat similar to how you can rate-limit bittorrent. Is there a way to do this without touching the networking hardware? I'm envisioning something akin to: magic-qos-tool 'scp file user@host:/path/to/file' Or.. scp -rate 40kbps file user@host:/path/to/file

  Read the article

• Excel Help: Userforms

  - by B-Ballerl

  I have developed a macro that does a whole bunch of things for me based on a few things. (Importing files). The file names are dated dd_mm_yyyy and right now I enter them into a sheet where the macro can call the information. Not really wanting this I designed a userform where the user could enter the "dd", "mm", "yyyy" and how many consecutive days of files there were. Ex. Say 28_06_2011.txt 29_06_2011.txt there would be one consecutive day. I want to be able to call the information entered in the user-form (day, month, year, and consecutive days) to use in the macro and have been unsuccessful because I don't know how to call that information. Is it similar to referring to a range in a worksheet? Thanks in Advance for any Help.

  Read the article

• Cannot ping my domain-joined server - Can only ping domain controller - host unreachable

  - by Vazgen

  I have a HyperV Server hosting a Domain Controller VM (192.168.1.50) and another VM (192.168.1.51) joined to this domain. I have: domain controller as DNS server forward lookup zone for the domain with host record for 192.168.1.50 and 192.168.1.51 Windows client has primary DNS server set to 192.168.1.50 and secondary to my ISP I can ping 192.168.1.50 (domain controller) successfully but cannot ping 192.168.1.51 (domain-joined VM) When pinging from Windows client: ping 192.168.1.51 Reply from 192.168.1.129 : Destination host unreachable When pinging from Domain Controller: ping 192.168.1.51 Reply from 192.168.1.50 : Destination host unreachable I have 2 virtual network adapters one PRIVATE for intranet (set to static IP 192.168.1.51) and one PUBLIC for internet with a dynamic IP. I noticed the the PUBLIC one inherited the "mydomain.com" domain subtitle after joining the domain... I don't know what this meant but it seemed more intuitive to me to switch THIS ONE to have the static IP. After I configured that I still could not ping but now I get: ping 192.168.1.51 Request timed out What seems to be the issue, I'm relatively new to networking.

  Read the article

• Find text between lines in linux

  - by Kasper Mooijman

  I have a log-file where at the end of a series of lines you can see if this block is relevant now I'm looking for a command like sed to delete de blocks ending with "Content-Length: 0" and beginning with the last "--" before this line. I tried sed -n "/--/,/Content-Length: 0/d" but this takes the first "--" and the first "Content-Length: 0" and deletes it. ex : line 1 "--" line 2 line 3 "Content-Length: 20" line 4 "--" line 5 line 6 "Content-Length: 0" i want to delete line 4,5 and 6 not line 1 to 6 hohw can i do this?

  Read the article

• Socksify TCP connections reaching a gateway IP -- preferably without iptables

  - by Alexandra Neagu

  I have Virtualbox installed on Debian with a few virtual machines. I can't install anything in the guests, and I use host only networking, vboxnet0. The host IP in the host network is 192.168.56.1, and the guests have static IPs in 192.168.56.0/24. I access Internet with a SOCKS proxy (without authentication) and I would like the Virtualbox guests TCP connections to be sent through the SOCKS proxy. This would also be useful for socksifying external TCP reaching a gateway network card or wireless access point. I looked at transocks, tun2socks, with dante-client, etc., but I don't know how can I achieve this without enabling IP forwarding in the host and using iptables. Maybe to attach somehow the Virtualbox vboxnet0 network to the tunnel tun0 used by tun2socks? Or maybe there is a way to do NAT to tun0 in Virtualbox? I only need TCP traffic and I don't need UDP, not even for DNS.

  Read the article

• OpenVPN not with Windows 7 PCs on client Lan

  - by Rohan

  I have a setup with a router running OpenWRT with an openvpn client. Windows 7 pc's cannot access the vpn. They time out trying to access servers on the VPN. The mystery to me is that the setup works fine for my laptop running ubuntu. I can access the VPN without any issues. I previously had a router running Tomato with the same openvpn setup and all the computers could access the VPN. What could account for the difference in behaviour? Is there something I am missing in the OpenWRT setup that is required for windows networking that is on by default with tomato? To clarify the OpenVPN client is on the OpenWRT router. The client connects to the OpenVPN server. But when I try to access the VPN from Windows computers on my network I cannot.

  Read the article

< Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >