Search Results

Search found 20785 results on 832 pages for 'idea'.

Page 351/832 | < Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >

• Solution to wirelessly project tablet desktop?

  - by Robert

  I’m trying to find a device that would allow a windows 7 client to wirelessly connect and display their screen to a projector while still connected to the wireless network. The idea is to allow a professor to still project and display content while walking around the room with their tablet. To date, haven’t been able to find a solution that meets the requirements, has anyone stumbled across one yet? Requirements Must support Windows 7 Must be able to connect to WPA2 Personal(and hopefully enterprise) Must not use any usb dongles – those get lost/damaged given a chance. Goal Wirelessly display screen to projector without cables from tablet/laptop.

  Read the article

• Ubuntu SSH issue

  - by palani

  0 Hi, I have the ubntun machine... under my /home/user/.ssh i have my id_rsa.pub key... i carefully copied that key and paste my key to respository Git account. After that i try to connect from locat system to my git respository i got the following error warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.). . I removed SSH in system and re-enable and did agin.. but no luck.... I have no idea what's happening with my SSH key ....can any one please tell me on this... Note : i noticed in my home /home/user/.ssh && /home/user/.ssh2

  Read the article

• Ubuntu SSH issue

  - by palani

  Hi, I have the ubntun machine... under my /home/user/.ssh i have my id_rsa.pub key... i carefully copied that key and paste my key to respository Git account. After that i try to connect from locat system to my git respository i got the following error warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.). . I removed SSH in system and re-enable and did agin.. but no luck.... I have no idea what's happening with my SSH key ....can any one please tell me on this... Note : i noticed in my home /home/user/.ssh && /home/user/.ssh2

  Read the article

• Why would video stutter on HDMI but not on DVI?

  - by CorvT

  I've got a system running Ubuntu 12.04 with an i3 2120T CPU/GPU. When I play video through mplayer, I notice when I'm hooked up to a screen via HDMI there is a small stutter (1-2 frames) every few seconds. I don't see this happening when I connect via DVI on the same screen. Resolution and refresh rate are same for both HDMI and DVI, so I'm not sure where else the problem could be coming from. I've also tried two different screens, and different cables. I see the stutter with either HDMI-HDMI cables, or DVI-HDMI cable with DVI from the PC and HDMI into the screen. I don't see the stutter with DVI-DVI cables, or when I use HDMI-DVI cables with HDMI from the PC to DVI into the screen. I've also tried using an AMD 5XXX series card with the open source radeon driver, and saw the same problem. I then tried an nVidia GeForce 210 card with the closed source driver, and the stutter went away. To me this smells like a driver/mesa/glx issue (since the problem went away with the nvidia card/driver), but I have no idea how to track this down.

  Read the article

• SharePoint Designer not syncing consistently

  - by normalocity

  I've got a user who uses SharePoint Designer to maintain an internal intranet site. When syncing (remote-to-local) it appears to work at first, but usually hangs about 2-3 minutes into the sync, when he's syncing it to a sub-folder of his "My Documents". In this case, his "My Documents" is stored on a network share/profile. When I do the same thing, it works for me. The difference? My "My Documents" folder is locally stored. In other words, he's syncing from the remote server, into a network share. I'm syncing from the remote server, into a local drive. Any idea why having the sync destination on a network share, vs. a local drive would cause this? When it locks up, we can navigate to his "My Documents" folder still - so I don't believe that we're loosing connection to his drive - unless perhaps the connection is intermittent, and SharePoint Designer isn't re-trying the sync.

  Read the article

• Semantic coupling vs. large class

  - by user106587

  I have hardware I communicate with via TCP. This hardware accepts ~40 different commands/requests with about 20 different responses. I've created a HardwareProxy class which has a TcpClient to send and receive data. I didn't like the idea of having 40 different methods to send the commands/requests, so I started down the path of having a single SendCommand method which takes an ICommand and returns an IResponse, this results in 40 different SpecificCommand classes. The problem is this requires semantic coupling, i.e. the method that invokes SendCommand receives an IResponse which it has to downcast to SpecificResponse, I use a future map which I believe ensures the appropriate SpecificResponse, but I get the impression this code smells. Besides the semantic coupling, ICommand and IResponse are essentially empty abstract classes (Marker Interfaces) and this seems suspicious to me. If I go with the 40 methods I don't think I have broken the single responisbility principle as the responsibility of the HardwareProxy class is to act as the hardware, which has all of these commands. This route is just ugly, plus I'd like to have Asynchronous versions, so there'd be about 80 methods. Is it better to bite the bullet and have a large class, accept the coupling and MarkerInterfaces for a smaller soultuion, or am I missing a better way? Thanks.

  Read the article

• VMWare and ALT GR key results in missing characters

  - by donat

  For some odd reason WMware products hijack the AltGy-key despite I make sure that other keys are used as hot keys to release mouse and keyboard from the virtual machine. While this is not a problem for US keyboards, european however who extensively use AltGR for characters such as pipe (|), at-sign (@), left brace ({) and right brace (}). This seem to happen both in Windows and Linux and I can not seem to find a solution that works for both. :( Anyone have an idea how to fix this without the need to modify the guest OS every time? Thank you.

  Read the article

• Mechanics of reasoning during programming interviews

  - by user129506

  This is not the usual "I don't want to write code during an interview", in this question the assumption is that I need to write code during an interview (think about the level of rewriting the quicksort or mergesort from scratch) I know how the algorithm work or I have a basic idea of how I should start working from there, i.e. I don't remember the algorithm by heart I noticed that even on a whiteboard, I always end up writing bugged code or code that doesn't compile. If there's a typo, whatever I usually live with that.. but when there's a crash due to some uncaught particular case I end up losing confidence in my skills. I realize that perhaps interviewers might want to look at how I write code and/or how I solve problems rather than proof-compiling my whiteboard code, but I'd like to ask how should I approach the above problem in mental terms, i.e. what mental steps should I follow when writing code for an interview with the two bullet points above. There must be a unique and agreed series of steps I should follow to avoid getting stuck/caught into particular exception cases (limit cases) that might end up wasting my time and my energies rather than focusing on the overall algorithm for the general case. I hope I made my point clear

  Read the article

• #altnetseattle - Kanban

  - by GeekAgilistMercenary

  The two main concepts of Kanban is to keep the queues minimum and to maintain visibility. Management/leadership needs to make sure the Kanban Queue doesn’t get starved.  This is key and also very challenging, being the queue needs to be minimal but also can’t get too small during the course of work.  This is to maintain maximum velocity. Phases of the Kanban need to be kept flowing too, bottlenecks need removed ASAP when brought up. Victory Wall – I dig that idea.  Somewhere to look to see the success of the team. The POs work in Rally or other tools for some client management, but it causes issues with the lack of "visibility" – a key fundamental ideal & part of Kanban. One of the big issues is fitting things into a sprint, when Kanban is used with Scrum, but longer sprints are wasteful. Kanban work sizes are of a set size. At this point I got a bit side tracked by the actual conversation and missed out on note taking.  Overall, people doing Kanban and Lean Style Software Development I would say are some of the happiest coders around.  The clean focus, good velocity, sizing, and other approaches that are inferred by Kanban help developers be the rock stars and succeed. This is definitely a topic I will be commenting on a lot more in the near future.

  Read the article

• How to convince a client to switch to a framework *now*; also examples of great, large-scale php applications.

  - by cbrandolino

  Hi everybody. I'm about to start working on a very ambitious project that, in my opinion, has some great potential for what concerns the basic concept and the implementation ideas (implementation as in how this ideas will be implemented, not as in programming). The state of the code right now is unluckily subpar. It's vanilla php, no framework, no separation between application and visualization logic. It's been done mostly by amateur students (I know great amateur/student programmers, don't get me wrong: this was not the case though). The clients are really great, and they know the system won't scale and needs a redesign. The problem is, they would like to launch a beta ASAP and then think of rebuilding. Since just the basic functionalities are present now, I suggested it would be a great idea if we (we're a three-people shop, all very proficient) ported that code to some framework (we like CodeIgniter) before launching. We would reasonably be able to do that in < 10 days. Problem is, they don't think php would be a valid long-term solution anyway, so they would prefer to just let it be and fix the bugs for now (there's quite a bit) and then directly switch to some ruby/python based system. Porting to CI now will make future improvements incredibly easier, the current code more secure, changing the style - still being discussed with the designers - a breeze (reminder: there are database calls in template files right now); the biggest obstacle is the lack of trust in php as a valid, scalable technology. So well, I need some examples of great php applications (apart from facebook) and some suggestions on how to try to convince them to port soon. Again, they're great people - it's not like they would like ruby cause it's so hot right now; they just don't trust php since us cool programmers like bashing it, I suppose, but I'm sure going on like this for even one more day would be a mistake. Also, we have some weight in the decision process.

  Read the article

• Strange Maintenance Plan SubPlans behaviour: each SP runs all the tasks of all other SP at odd times

  - by Wentu

  SQL Server 2005: I have a problem with scheduling a Maintenance Plan (MP) with 3 subplans (SP). SP1 is scheduled to run hourly, SP2 daily at 7.00 and SP3 on sundays at 8.00 Reading MP history I see that what happened (I know it seems crazy) is: 11: SP1 runs and executes all the tasks of SP1 SP2 and SP3 12: SP2 runs and does the same 13: SP3 runs and does the same 14: SP1 runs and does the same From the job Activity monitor, SP1 has last run time at 14, SP2 and SP3 are never been executed. All of the SP are scheduled correctly in the Job Activity Monitor (SP2 for tomorrow at 7, SP3 for next sunday at 8) Do you have any idea what is happening? Thankx a lot Wentu

  Read the article

• Git for Application Settings

  - by devians

  I use a lot of tools at work and at home, and im constantly tweaking them in one location or the other. It's somewhat common practice for people to use Git to version their .vim, .vimrc, and other . files, since you can host your config files on github and have the share-ability and all the other advantages that implies. Being able to version and branch my configs sounds like a grand idea, since I'm always messing about with them. I'd like to discuss the best practice for doing this on a slightly wider scope. How would you implement it? Have your configfiles repo in ~/Library/Configs or similar, and symlink the appropriate files? How to handle preference files for Applications, ie iTerm2. These files are recreated every time, so you'd have to symlink 'backwards' and put a link in the repo? rather than symlinking to the repo, since it would just delete the symlink.

  Read the article

• How to setup a tunneled connection to a NAS?

  - by Jan

  Hi there, While looking into alternatives for Dropbox I explored the idea of a NAS. It would be easy to hook up the NAS to a broadband connection and have the users access the files. However, - The data needs to be encrypted on the NAS itself (in case it gets stolen). - The connection to the NAS needs to be secure (VPN?). - The drive needs to appear as a drive under windows (so no https). Any ideas? Thanks in advance, I can't seem to find the final solution! Jan

  Read the article

• Webserver: Performance impact when storing session files on /dev/shm

  - by GetFree

  I have a website runing on a typical setup: Linux, Apache, PHP, MySQL. However, what's not typical about it, is that it's getting tons of traffic (400,000+ visits a day) and so, efficiency is becoming more and more important to me. I'm constantly looking for things I could optimize and, right now, my attention is focused on PHP's session files. There's a hell lot of session files constantly being read and created on the /tmp directory. So my question is: Is it a good idea to store the session files in /dev/shm (tmpfs) in order to speed things up a little bit??

  Read the article

• Please help me decide if I should I change jobs [closed]

  - by KindaNewbie

  About me: I am very entrepreneurial and believe I would do well working solo as a consultant and possibly hiring help. I do want to do that at some point. I love to learn and a good challenge. Please help me make this decision! Current job (I am there for about 4 years): Pros: secure job good pay (I guess I am 80 percentile for my level/geographical area) large corporation - main business is not software excellent health insurance for low cost to me, pension, 401k matching, 6 weeks paid time off per year small dev team use of latest technologies (mostly WPF/silverlight) low supervision (I can do personal things all the time) I get to do a lot of moonlighting and my goal was to go solo full-time in a year or so. Cons: small team of non-professional devs 50% of my time I do things I don't enjoy projects are not meaningful to the organization If I left it wouldn't be too hard for them - business would resume as usual. Nobody besides my small team of 3 has any idea about software development whatsoever. Prospect job: Pros: small/agile software company same salary as current job same size dev team but all are very sharp (I would probably be the weakest of the team in the beginning) technology used is outside my comfort zone (latest cool web technolgies such as html5/jquery/...) - I am not a web dev and they know that. ton of learning opportunity Start-up - possibility of stock option/partial ownership of some sort Cons: Small office space - not able to do personal things as often (may be pro) No room for moonlighting less benefits (but salary can compensate for that)

  Read the article

• Problems with webcame

  - by Murtaza

  My friends is using windows 8.1 and he has a webcam. He says it is working very well even without installing drivers. Webcam is A4tech - PK-331F. I asked for this webcam for use. I plugged that that webcam and windows detected it and installed drivers automatically. Then I opened Skype for checking webcam. I got massage on top of Skype that "your webcam has microphone" when I clicked over it, it directed me to sound settings where I microphone of webcam was working. I went to videos settings but webcam wasn't listed their. As you can see in image. Webcam is listed in device manager but isn't listed in Skype. I am also using windows 7 professional. Any idea why it is happening?

  Read the article

• How should we deal with multiple transaction-report requests?

  - by Mithir

  We are developing a system for the retail market which one of it's features will enable clients(actually consumer clubs) to go through all transactions made by end-clients. One of the ways to get this information will be via an API. The idea is that there will be requests for reports with a start date and an end date, and a response will have all the transactions between those dates. We are worry that some reports may be very large, and that some clients will repeatedly request for reports, in this case the DB and CPU will be very overloaded. The same server that will service those requests, also takes care the the actual retail transactions (received by proprietary devices) and a Web application. We are not sure about how to limit the report requests from the API so that it won't affect the system too much. So, how should we deal with this scenario? any thoughts? EDIT: just to make clear: When I mentioned proprietary devices I meant "On-Location" devices which are used during sales with end-clients, this means that these requests shouldn't get delayed, and this is the main concern.

  Read the article

• this.BoundingBox.Intersects(Wall[0].BoundingBox) not working properly

  - by Pieter

  I seem to be having this problem a lot, I'm still learning XNA / C# and well, trying to make a classic paddle and ball game. The problem I run into (and after debugging have no answer) is that everytime I run my game and press either of the movement keys, the Paddle won't move. Debugging shows that it never gets to the movement part, but I can't understand why not? Here's my code: // This is the If statement for checking Left movement. if (keyboardState.IsKeyDown(Keys.Left) || keyboardState.IsKeyDown(Keys.A)) { if (!CheckCollision(walls[0])) { Location.X -= Velocity; } } //This is the CheckCollision(Wall wall) boolean public bool CheckCollision(Wall wall) { if (this.BoundingBox.Intersects(wall.BoundingBox)) { return true; } return false; } As far as I can tell there should be absolutely no problem with this, I initialize the bounding box in the constructor whenever a new instance of Walls and Paddle is created. this.BoundingBox = new Rectangle(0, 0, Sprite.Width, Sprite.Height); Any idea as to why this isn't working? I have previously succeeded with using the whole Location.X < Wall.Location.X + Wall.Texture.Width code... But to me that seems like too much coding if a simple boolean check could be done.

  Read the article

• Is browser and bot whitelisting a practical approach?

  - by Sn3akyP3t3

  With blacklisting it takes plenty of time to monitor events to uncover undesirable behavior and then taking corrective action. I would like to avoid that daily drudgery if possible. I'm thinking whitelisting would be the answer, but I'm unsure if that is a wise approach due to the nature of deny all, allow only a few. Eventually someone out there will be blocked unintentionally is my fear. Even so, whitelisting would also block plenty of undesired traffic to pay per use items such as the Google Custom Search API as well as preserve bandwidth and my sanity. I'm not running Apache, but the idea would be the same I'm assuming. I would essentially be depending on the User Agent identifier to determine who is allowed to visit. I've tried to take into account for accessibility because some web browsers are more geared for those with disabilities although I'm not aware of any specific ones at the moment. The need to not depend on whitelisting alone to keep the site away from harm is fully understood. Other means to protect the site still need to be in place. I intend to have a honeypot, checkbox CAPTCHA, use of OWASP ESAPI, and blacklisting previous known bad IP addresses.

  Read the article

• Install Windows XP/7 without a CD drive when the BIOS does not support booting from USB devices

  - by David Pearce

  I have a computer that has a dead CD drive in it and it seriously needs a new installation of Windows (XP is on it now, but Windows 7 does not sound that bad). At first I tried making a bootable USB drive, but it does not look like the BIOS supports booting directly from a USB drive. Is there some sort of boot loader that I can put onto the hard drive first and boot from the USB drive using that? If not, how else can I re-install Windows on the computer? Edit: The only bootable device the computer has it the network with PXE (although I have no idea how to do that) and it's three internal hard drives

  Read the article

• Colored blocks on boot

  - by stackzerad

  When my laptop tries to boot right after POST I see colored blocks with flashing symbols in them. I am able to boot from windows PE cd. Tried fixboot and fixmbr with no success. I have also tried replacing boot files (ntldr, io.sys etc..) and removing video card drivers from windows\system32\drivers. The drive is seagate 2.5 ATA 160GB and has one NTFS partition on it. I have already fixed this issue by reformating the drive and reinstalling everything but after couple of weeks I get the same issue again. The diagnostics software shows no bad sectors on it and virus scan didn't find anything. Does anybody have an idea what this might be? UPDATE: tried defragmenting the hard drive just in case, but still no luck

  Read the article

• Display Problems running Ubuntu 12.04 in Windows VMware Player

  - by Alex Reynolds

  I am posting this again because I have changed to VMWare Player and I discovered something new. I am running Ubuntu 12.04 LTS (Guest) in VMWare Player 6.0.2 on Windows 7 64-bit Host. I have VMWare Tools installed properly. I am running MATE but the problem persists when I change (to and from) xfce, gnome, mate a-- and back again I had been using this for a couple of years without any graphics issues. After an Ubuntu update (typical) -- my video is corrupt and will not refresh correctly. My desktop icons are "mirrored" and when I open a terminal window (for instance) -- sometimes -- the window appears multiple times. Of course, only one is the real image. It seems to be a refresh problem. When I move an active window around the screen the "older" images "erase" and my icons (for instance) are in the correct location. For instance, I can move the terminal around a pretty corrupted window and the screen behind it is repainted correctly. NEW: Next, I got the idea to try and Remote Desktop in to the Ubuntu 12.04 LTS Guest OS from my Windows 7 64-bit Host. Once working, and connected via Win RDC -- using MATE as default in my /etc/xrdp/startws.sh -- my video is not corrupted and works fine (as in the past). Any ideas about what is going on ? or how to fix this ?

  Read the article

• How to draw diagrams in Open Office?

  - by Amokrane

  Hi, I would like to draw diagrams using Open Office but I didn't find any installed by default. What I am exactly looking for are diagrams that look like the ones that come with MS Office 2007/2010 (like Pyramid diagrams, Star diagrams etc.). Any idea? A plugin to install? Otherwise are there any online services that can do it? (I have tested Cacoo and gliffy but they don't really offer the diagrams that I am looking for). Thanks!

  Read the article

• Two Cloudy Observations from Oracle OpenWorld

  - by GeneEun

  Now that the dust has settled from another amazing Oracle OpenWorld, I wanted to reflect back on a couple of key observations I made during the event. First, it was pretty clear that Cloud was again a big deal at this year's conference. Yes, the Oracle Database 12c announcement was also huge, but for most it was hard to not notice that Oracle continues to be "all-in" with respect to cloud computing. Just to give you an idea of the emphasis on Cloud, there were over 300 Cloud-related sessions at this year's OpenWorld. If you caught some of the demo booths in the Oracle Red Lounge, then you saw some of the great platform, application, and social services that are now part of Oracle Cloud, as well as numerous demos of private cloud products that Oracle offers. Second, during Thomas Kurian's keynote presentation on Oracle Cloud, he announced the Preview Availability of a new service called Oracle Developer Cloud Service. This new platform service will provide developers with instant access to environments to better manage the application development lifecycle in the cloud. It provides development project teams access to favorite tools like Hudson, Git, Github, wikis, and tasks to help make innovation faster, more collaborative, and more effective. There's also integration with IDEs like Eclipse, NetBeans, and JDeveloper. If you're a developer, it's an awesome addition to Oracle Cloud's platform services! Want more details about Oracle Developer Cloud Service? Click here.

  Read the article

• How to get started in coding for JBoss

  - by Mister IT Guru

  I have an idea on how to revamp our internal application, after having accessed the needs of the users, addressing thier current issues, and the like. But I am not a coder. My last application I wrote was in college, in C, (java wasn't invented-ish!) and it was a booking system, with the option to add on other modules, blah blah. I got an A, but I became a system administrator instead, more intrested in designing and maintainend networks and infrastructure, but with the advent of virtualisation, and linux management tools such as puppet I can now manage infrastructure in my sleep! Now I want to write code - to put on my infastructure, and I want to build .... a booking system! This is just to get experience, but I am at a loss as to where to start. Setting up the environment, will take me about a day. Writing the spec, even how I want it to work, I already know, but as for actually coding in a decent manner, I can only guess. If anyone can recommend a book, website, blog, twitter person to follow, or just advice on how to build a kick butt basic jboss app, then please, "I AM READY TO LEARN" :)

  Read the article

< Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >