Search Results

Search found 19471 results on 779 pages for 'network troubleshooting'.

Page 351/779 | < Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >

• Move the ESXi service console from eth0 to eth1.123

  - by Mircea Vutcovici

  I have an VMware ESXi 4.0.0 with 2 physical network cards. First one, eth0, has only the Service Console and the other one, eth1, is a trunk with all VLANs (including the management VLAN used by the Service Console). I would like to free eth0 port to be able to connect a network storage and I would like to move the management IP from eth0 to eth1/VLAN123. Can I do this remotely? Is it possible from vSphere client? Should I do it from the ESXi console?

  Read the article

• Searching For a Desktop Security Software to harden Windows machines, anybody?

  - by MosheH

  I'm a network administrator of a small/medium network. I'm looking for a software (Free or Not) which can harden Windows Computers (XP And Win7) for the propose of hardening standalone desktop computers (not in domain network). Note: The computers are completely isolated (standalone), so i can't use active directory group policy. moreover, there are too many restriction that i need to apply, so it is not particle to set it up manual (one by one). Basically what I’m looking for is a software that can restrict and disable access for specific user accounts on the system. For Example: User john can only open one application and nothing else -- He don’t see no icon on the desktop or start menu, except for one or two applications which i want to allow. He can't Right click on the desktop, the task-bar icons are not shown, there is no folder options, etc... User marry can open a specific application and copy data to one folder on D drive. User Dan, have access to all drives but cannot install software, and so on... So far ,I've found only the following solutions, but they all seems to miss one or more feature: Desktop restriction Software 1. Faronics WINSelect The application seems to answer most of our needs except one feature which is very important to us but seems to be missing from WINSelect, which is "restriction per profile". WINSelect only allow to set up restrictions which are applied system-wide. If I have multiple user accounts on the system and want to apply different restrictions for each user, I cant. Deskman (No Restriction per user)- Same thing, no restriction per profile. Desktop Security Rx - not relevant, No Win7 Support. The only software that I've found which is offering a restriction per profile is " 1st Security Agent ". but its GUI is very complicated and not very intuitive. It's worth to mention that I'm not looking for "Internet Kiosk software" although they share some features with the one I need. All I need is a software (like http://www.faronics.com/standard/winselect/) that is offering a way to restrict Windows user interface. So if anybody know an Hardening software which allows to set-up user restrictions on Windows systems, It will be a big, big, big help for me! Thanks to you all

  Read the article

• Setting http_proxy for Chromium in shell

  - by iceboal

  In order to set proxy in Chromium browser, one needs to go to Settings ? Under the Hood ? Change Proxy Settings ? Network Proxy. It's too complicated. How do I set http_proxy in shell? I've tried export http_proxy=http://127.0.0.1:8080/ But it doesn't seem to work. Also, if you only want to set the proxy on the Chromium browser -- not your entire network -- the command line is the only way to set the proxy just for the browser. How can one set the proxy on Chromium -- using the command line -- to solve this problem?

  Read the article

• How to forward connection from one interface to another under linux

  - by Daniel

  Hi, I have linux box which has two network interface, eth0, eth1. from eth1 I can access an internal website, say under port 8080. from outside the box, I can't access that network. my question is, is there a way I set up something so from outside the box, there appears to be a web server running in port 8080 and when I connect to it, it automatically forwards to eht1 the internal site? I tried to enable ip forward and add a static route, but it doesn't work. thanks.

  Read the article

• How to create a VPN between a Host and VMWare VMs?

  - by Anindya Chatterjee

  I have a set of machines as follows My home laptop running Win7 Ultimate with internet connection. A vmware workstation vm running Windows Server 2003 Standard edition server in my laptop w/o internet connectivity Some of my peers' machines connected to internet I want to create a VPN with these machines, provided the VM will not have any direct internet connection and my peers should able to connect to the SVN server application running on this Win2003 server VM. Can anybody please suggest me how to setup this network, what software I need to install in both physical machine and vm, what kind of network connectivity should be there between vmware guest and host machine? EDIT: I deliberately don't want to connect the VM with internet. The host will work more of a gateway of the VPN connection for the VM.

  Read the article

• How to route packets from Wi-Fi to Ethernet on OSX?

  - by Alexander Artemenko

  I have a trouble, configuring a home network. Here is how my devices are connected together: Internet     ? Wi-Fi Router ? MacBook     ? iMac ?ethernet cable? Synology NAS I have no ability to plugin NAS right into the Wi-Fi router. The problem is that MacBook does not see NAS, because they are in different networks — I configured Wi-Fi Router to serve 192.168.10.0/24 addresses, and configured iMac's ethernet connection to use 192.168.20/24 network. Is there a way to setup route from MacBook to the NAS?

  Read the article

• Cannot Join a Domain on VM

  - by arvind0007

  Hi Guys. I have installed Windows 2003 server R2 on a VM. This VM is running on Windows XP PRO. When i try to make this XP Pro PC join the domain on the VM it tries to locate the server and gives me the following error message " The specified network name is no longer available", despite the fact that i can still see this domain on my network. can anyone help with this please. This is the very first time i am trying connecting a client to a VM server so hope am not doing anything wrong.. thanks

  Read the article

• Enterprise laptop doesn't recognize WiFi

  - by Michiel

  My cousin is using an enterprise laptop for home work, but for some reason she can't connect to her home WiFi. The laptop isn't able to detect any WiFi networks, although she used to be able to detect and connect to the network. Whenever I troubleshoot for possible issues, Windows Vista is telling me the switch for wireless reception is turned off, but I'm sure it's turned on (If I turn it on, the HP Wireless Assistant tells me it's turned on, so...). But if I take a look at the settings, I get this message (sorry it's in Dutch): So for some reason, the WLAN reception is deactivated and I cannot activate this... Does this have something to do with the laptop being an enterprise laptop? Or is there a simple setting I missed? The most recent driver of the Wireless Network Card (Intel Wireless 5100) is installed.

  Read the article

• Quickbooks and Cisco ASA 5505

  - by user41516

  I have a Cisco ASA 5505, and everything has seemed to function fine, however I have had problems with Quickbooks 2008 running super slow over the network (Samba) and narrowed it down to the Cisco box. Other Samba transfers seem to be pretty fast, and the Quickbooks file is not very large at all (<25 MB), and other Samba transfers seem to be fine. However, I'm not sure if Quickbooks uses another protocol or if there are other ports that need to be opened. Can anybody give me any clues on how to resolve or troubleshoot the problem or have any prior experience with running Quickbooks over a network?

  Read the article

• Internet slow on one router only [the problem only in Ubuntu] [on hold]

  - by mrSuperEvening

  Internet works perfectly on every other router, but browsing sucks at home (slow browsing and slow loading times). I changed DNS servers to 8.8.0.0, still doesn't help. And funnily, download speed is extremely high on this network (meaning torrents for example), but using browsers and loading websites is extremely slow (only on this network). Do I need to change something in router settings or what can I try? By the way, I use wired connection to router. EDIT: There's no problems when using Windows. EDIT: ifconfig: eth0 Link encap:Ethernet HWaddr f2:4d:a0:c0:3f:4c inet addr:192.168.11.8 Bcast:192.168.11.255 Mask:255.255.255.0 inet6 addr: fe80::f24d:a2ff:fec6:3f4c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:206798 errors:0 dropped:0 overruns:0 frame:0 TX packets:219570 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:76680734 (76.6 MB) TX bytes:21738160 (21.7 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:160 errors:0 dropped:0 overruns:0 frame:0 TX packets:160 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:11094 (11.0 KB) TX bytes:11094 (11.0 KB)` ping -c 2 4.2.2.2 PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data. --- 4.2.2.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms ping -c 2 google.com PING google.com (213.159.32.147) 56(84) bytes of data. 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=1 ttl=61 time=0.936 ms 64 bytes from lan-213-159-32-147.kns.skynet.lv (213.159.32.147): icmp_seq=2 ttl=61 time=0.937 ms --- google.com ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1001ms rtt min/avg/max/mdev = 0.936/0.936/0.937/0.030 ms

  Read the article

• Slow upload to Server 2008 DC, Downloads work as expected

  - by Anthony

  I have a Windows Server 2008 Domain Controller that I run as a do-it-all server. It has a GbE connection to the network and to every machine on the network. Downloads from the server file shares work as expected, between 70MB/s and 80MB/s to all the machines. However, when I try to copy files back up to the server, speeds fall to 7MB/s-10MB/s. I've disabled flow control and large send offload properties on all the NICs. I had this problem before and managed to fix it through some properties changes, but like an idiot, I never documented my fix and have since moved to a new server. Any ideas what I need to do to get the speeds to be more symmetric? EDIT: Remote differential compression is also disabled.

  Read the article

• Win 7: Share internet connection via Ethernet and WiFi

  - by Anvaka

  I have the following configuration: Box 1. Running Win 7, connected to the Internet via Eth0. Has one wireless network adapter and one another ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration.

  Read the article

• Win 7: Share internet connection via Ethernet and WiFi

  - by Anvaka

  I have the following configuration: Box 1. Running Win 7, connected to the internet via Eth0. Has one wireless network adapter and one more ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration

  Read the article

• Cross-platform automatic adhoc wifi?

  - by marienbad

  I'm not very knowledgeable about wifi, but I understand the notion of Adhoc networks (Wifi without a router), so... Is there a standard (or widely implemented) way of letting a device "momentarily" negotiate a wifi connection (Adhoc network or otherwise) directly to another device, transfer some data, and then quit, all without any user intervention on either device? For example, let's say I have a PC and an ereader in the same room and there's no nearby wifi router for either of these devices to connect to. I want to send a file from PC to ereader but I don't want to do the work of setting up network, selecting an SSID, or entering passwords. Is that possible?

  Read the article

• How can I perform a ping every X minuts and check the response time?

  - by Profete162

  I am currently working in a big company and we have serious latency issues. This is happening in a process control system, and is unacceptable (Open a valve sometimes take 2 minuts before command start) The Network team seems very lazy and I want to check when they say "everything alright on the network". So, I want to create a loop that ping the server and write the result in a text file. I am not a batch expert, but do you think this code is correct to use? @ECHO OFF :LOOPSTART time /T ping xxx.xx.x.x -t >> filename.txt sleep -m 3000 GOTO LOOPSTART

  Read the article

• Rsync like windows backup tool

  - by Halfgaar

  I need to backup some windows machines and have been unable to find the proper tool. What I need is a tool that does efficient copying of changed files to a windows network location, like Rsync does. In turn, the server will then back that up using rdiff-backup, a tool which does very clever incremental backups. Right now I'm using windows' 7 included backup feature, but I really don't get that. It's too much off-topic, but it doesn't suffice (seems buggy as well). I looked into Amanda, but as soon as it wanted to install MySQL, I aborted. I also tried Deltacopy, but unfortunately, I don't remember what the problem with that was... Any advice for an rsync like tool that just does daily syncs to a network location?

  Read the article

• Getting VPN to work from Virtual PC

  - by strobaek

  Setup: Host is running Windows7. Virtual PC is a Windows Server 2008 running under VMWare workstation 6.5. From the Host I have a VPN to e.g. TFS and other resources. From the VPC I need to connect to e.g. a SQL server via the VPN. My problem is, that I cannot get a connection from the VPC. If I'm sitting on the corporate network, all is working fine (but then I don't have the VPN). From home - where the VPN is required - it does not work. I have two network adapters defined/configued. One as BRIDGED and one as Host Only. IF I change the one being BRIDTED to NATS I have no connectivity at all from the VPC. I have no problems connecting from my host to the VPC. Thanks.

  Read the article

• Sharepoint 2010 web front end servers and services configuration

  - by Yash

  I have a sharepoint insfrastructure where a document library is made available both locally and on the internet. I have a few web front end servers facing the public (in the DMZ) while having another set inside the secured network for internal use. I also have an application server for sharepoint services inside the secured network. My goal is to configure sharepoint in such a way that the sharepoint services are available only locally and not via the internet. The users accessing the system online should not benefit of the sharepoint services. Is this possible on the same farm?

  Read the article

• Windows Server 2003: Router, DHCP, Looses internet connection

  - by jM2.me

  I have following setup: a windows server 2003 dedicated server with tho nics. One is connected to internet (no modem/router), and second one is connected to private network. Server has DHCP server installed on it and internet nic is being shared for internet access. The problem is sometimes server looses connection to the internet, so same happens to private network. So far I can manually fix it by releasing and renewing IP address. What could be the cause of this problem? DHCP lease from ISP? Thanks

  Read the article

• Windows 7 - Home Drive Map Fails

  - by Ed Fries

  Server 2003 SP2 (not R2) with 2 new Win 7 Pro workstations. Home Drive is set in AD (not GP) to map to \\server\users\username. Home Drive map fails, other network drives map correctly. No error logged on server or PC, Win 7 shows "Could not reconnect all network drives." There is no Y: (Home Drive) listed, either in the GUI or via Net Use. Manual map via batch file in startup group with the same path works correctly? Home Drive map works correctly on XP workstations.

  Read the article

• Routers with USB plug to connect external storage

  - by sixtyfootersdude

  I am just about to buy a new wireless router. I want to be able to hook up a harddrive to it and let the harddrive serve the entire network. I will mostly be storing media and some backups on the drive. I know I could get some kind of NAS but I would prefer to just hook up one of my many unused hard drives directly to my router. It looks like d-link has several products that do this using shareport. If you were wanting to have network storage how would you do it? With a NAS? Using a router with a USB port. Are these systems robust? What router would you buy?

  Read the article

• Sonicwall Global VPN Client fails to connect, despite successful connections from other computers from behind the same router

  - by JesperE

  I've recently been unable to connect to our Sonicwall VPN at work. The Sonicwall client is stuck on "connecting", and the log says "The peer is not responding to phase1 ISAKMP requests". The weird thing is that this is not an issue with my own PC, only my work laptop (Lenovo W530 running Windows 7 64-bit), and this has only appeared recently. This ought to rule out any problems with my ISP blocking VPN, or issues with the router itself. My company's IT department says that they cannot see anything in their logs when I'm trying to connect. My conclusion is that something is wrong on the laptop itself. Disabling the firewall does not help. Can the VPN connection be blocked in other ways? What should I be looking for? EDIT: This problem has "magically" disappeared, without any changes done in my network. I can only assume that this was caused by some network glitch with my ISP.

  Read the article

• Windows 2003 server RRAS on VPC

  - by Saif

  I'm trying to setup a L2TP VPN server(to give user access on to all my VPN instance) on a Windows 2003 instance running on my VPC. While trying to enable RRAS I'm getting error, "less than two network interfaces were detected on this machine". Eventually it's because there's only one network interface available, the which has private IP. I have elastic IP assigned to this instance as well. But RRAS can't see this. What should I do to RRAS to be able to see the interface with elastic IP?

  Read the article

• Manually forcing TCP connection to retry

  - by Vi.

  I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without delays in GNU/Linux?

  Read the article

• How to configure something like "Reflexive ACL" on OpenBSD?

  - by Earlz

  My U-Verse modem has something called "Reflexive ACL" described as Reflexive ACL: When IPv6 is enabled, you can enable Reflexive Access Control Lists to deny inbound IPv6 traffic unless this traffic results from returning outgoing packets (except as configured through firewall rules). This seems like a pretty good way to keep from having to maintain a firewall on each computer behind my router that gets handed an IPv6 address. It sounds about like a NAT, which for my small home network is all I want right now. Now my modem sucks as a router though, so I'm in the process of configuring an OpenBSD router to do that. I've got IPv6 supported and all that and my OpenBSD router will hand out IPv6 addresses by rtadvd. Now I want to keep people from having instant access to my local network through IPv6. How would I best do something like Reflexive ACL with pf in OpenBSD 5.0?

  Read the article

< Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >