Search Results

Search found 90974 results on 3639 pages for 'user 123'.

Page 351/3639 | < Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >

• Creating a .bat file to execute mysql and other commands

  - by BCIT - JD

  I'm looking for a way to reduce the amount of typing I do to check mysql entries and other things. For example, I wanted to create a .bat file that will execute the following commands. mysql -u user -p *enter in the password* USE databasename SELCT * FROM table; The problem is after the initial mysql -u user -p the rest of the commands written down do not get executed. Is it possible to continue running commands after calling something like mysql or other programs, that seem to add its prefix(?) to the beginning of commands (mysql). I'm not very familiar with the terminology so forgive me if it sounds confusing. I'd like to use the same kind of concept for other things as well. Help is much appreciated, Thanks.

  Read the article

• Accessing A Shared Directory That Has An Account White List

  - by Xan

  I'm on a LAN here at work and I have my desktop sharing some of my project folders. I can access the computer via \\ComputerIP\, but I can't actually open any of the folders. Upon attempting, I get the error: Windowns cannot access \ComputerIP\ProjectFolder You do not have permission to access \ComputerIP\ProjectFolder. Contact your network administrator to request access. For more information about permissions, see Windows Help and Support Now, this is understood considering I've made it so that you had to utilize the "Project" credentials to connect. I have a user account on my main computer hosting these shared folders that gives full access to the folders if you are this "Project" user. I can Remote Desktop the computer just fine from my laptop using either set of credentials. When I try to open these folders it doesn't give me the option to attempt to apply any credentials like it does when I remote desktop. How am I supposed to gain access to these folders?

  Read the article

• Restricting permissions to individual documents on SharePoint

  - by wahle509

  Here's what I'm trying to do: I would like to create a list of documents on a site in my company's SharePoint site. Each document should have specific user's permissions to view and edit it. For example: The list is for performance reports. John has his out there called "John_PR_09.docx". Only him and his supervisor should have permissions to view, edit, or do anything to it. And then another employee has hers out there with permissions for only her and her supervisor, and so on... I have tested this out with a document that I removed the groups and users from (since they inherit permissions from it's parent) and only gave my user account permissions to. I then asked someone else to try and open and she could, she even wrote "TEST" on the document and saved it. What am I doing wrong? I thought I stopped it from inheriting permissions from it's parent and only gave myself rights to edit it.

  Read the article

• Proper procedure - sftp access to www folder - To be able to upload files

  - by Jay

  My www folder is root:root. What should it be? My site works perfectly but maybe I am doing something wrong. My nginx.conf says user is 'nginx'. Should I be changing the www onwership and group to that or something else? Mainly I want to be able to sftp into the www folder using FileZilla. Preferably only allow access to the www folder. I want to be able to upload the website files but I just don't know the proper procedure. I have tried changing owners and groups but I get worried some part of the stack will not like it. For example does nginx play along, and php? I thought about having a sftp group or even an sftp user. But I don't want to go down a path that should be avoided. What should I be doing with my setup?

  Read the article

• Automated git push attempt does not work - authentication issue

  - by at least three characters

  I'm trying to automate a very periodic git add/commit/push cycle using a shell script and cron under OS X 10.8.5. The script is as basic as one would expect it to be: cd /my/directory git add . git commit -m "a commit message with the date" git push -u origin master I've tried running it both as root as well as a non-root user. When I do this manually, I get a dialog box from OS X requesting that I authenticate the operation. Running the script (either using cron or just using sh) ends up sending a message (via mail) to whichever user's cron executed the script saying that it was unable to write a file in the .git directory because of a permissions issue (which is most likely manual execution requires authentication). Is there any way to circumvent this issue, or give the script permission to perform this operation without having me intervene each time?

  Read the article

• VPN authentication and MAC addresses

  - by zakk

  I have to set up a VPN (various clients connecting to a web service on a server, which is also the VPN server) and I want to make sure that no user will share his/her credentials with third parties. I know that this problem is not solvable completely, but I'd want to set up some additional security checks... Some idea I have: 1) An additional check on MAC address, but... are MAC addresses preserved thru VPN? 2) Some kind of extra identification of the client (User Agent, open ports, I want to make sure that is the very same client I authorized). 3) I would like to avoid commercial solutions like a security token... I realize it would be the perfect solution, but it will be to expensive, I suppose... Do you feel that these options are viable? Do you have any other ideas? Thanks in advance for your replies!

  Read the article

• Relay Access Denied (State 13) Postfix + Dovecot + Mysql

  - by Pierre Jeptha

  So we have been scratching our heads for quite some time over this relay issue that has presented itself since we re-built our mail-server after a failed Webmin update. We are running Debian Karmic with postfix 2.6.5 and Dovecot 1.1.11, sourcing from a Mysql database and authenticating with SASL2 and PAM. Here are the symptoms of our problem: 1) When users are on our local network they can send and receive 100% perfectly fine. 2) When users are off our local network and try to send to domains not of this mail server (ie. gmail) they get the "Relay Access Denied" error. However users can send to domains of this mail server when off the local network fine. 3) We host several virtual domains on this mailserver, the primary domain being airnet.ca. The rest of our virtual domains (ex. jeptha.ca) cannot receive email from domains not hosted by this mailserver (ie. gmail and such cannot send to them). They receive bounce backs of "Relay Access Denied (State 13)". This is regardless of whether they are on our local network or not, which is why it is so urgent for us to get this solved. Here is our main.cf from postfix: myhostname = mail.airnet.ca mydomain = airnet.ca smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no smtpd_sasl_type = dovecot queue_directory = /var/spool/postfix smtpd_sasl_path = private/auth smtpd_sender_restrictions = permit_mynetworks permit_sasl_authenticated smtp_sasl_auth_enable = yes smtpd_sasl_auth_enable = yes append_dot_mydomain = no readme_directory = no smtp_tls_security_level = may smtpd_tls_security_level = may smtp_tls_note_starttls_offer = yes smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_auth_only = no alias_maps = proxy:mysql:/etc/postfix/mysql/alias.cf hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = mail.airnet.ca, airnet.ca, localhost.$mydomain mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + local_recipient_maps = $alias_maps $virtual_mailbox_maps proxy:unix:passwd.byname home_mailbox = /var/virtual/ mail_spool_directory = /var/spool/mail mailbox_transport = maildrop smtpd_helo_required = yes disable_vrfy_command = yes smtpd_etrn_restrictions = reject smtpd_data_restrictions = reject_unauth_pipelining, permit show_user_unknown_table_name = no proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps $virtual_uid_maps $virtual_gid_maps virtual_alias_domains = message_size_limit = 20971520 transport_maps = proxy:mysql:/etc/postfix/mysql/vdomain.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql/vmailbox.cf virtual_alias_maps = proxy:mysql:/etc/postfix/mysql/alias.cf hash:/etc/mailman/aliases virtual_uid_maps = proxy:mysql:/etc/postfix/mysql/vuid.cf virtual_gid_maps = proxy:mysql:/etc/postfix/mysql/vgid.cf virtual_mailbox_base = / virtual_mailbox_limit = 209715200 virtual_mailbox_extended = yes virtual_create_maildirsize = yes virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql/vmlimit.cf virtual_mailbox_limit_override = yes virtual_mailbox_limit_inbox = no virtual_overquote_bounce = yes virtual_minimum_uid = 1 maximal_queue_lifetime = 1d bounce_queue_lifetime = 4h delay_warning_time = 1h append_dot_mydomain = no qmgr_message_active_limit = 500 broken_sasl_auth_clients = yes smtpd_sasl_path = private/auth smtpd_sasl_local_domain = $myhostname smtpd_sasl_security_options = noanonymous smtpd_sasl_authenticated_header = yes smtp_bind_address = 142.46.193.6 relay_domains = $mydestination mynetworks = 127.0.0.0, 142.46.193.0/25 inet_interfaces = all inet_protocols = all And here is the master.cf from postfix: # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #submission inet n - - - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - - - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} spfpolicy unix - n n - - spawn user=nobody argv=/usr/bin/perl /usr/sbin/postfix-policyd-spf-perl smtp-amavis unix - - n - 4 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes -o disable_dns_lookups=yes #127.0.0.1:10025 inet n - n - - smtpd dovecot unix - n n - - pipe flags=DRhu user=dovecot:21pever1lcha0s argv=/usr/lib/dovecot/deliver -d ${recipient Here is Dovecot.conf protocols = imap imaps pop3 pop3s disable_plaintext_auth = no log_path = /etc/dovecot/logs/err info_log_path = /etc/dovecot/logs/info log_timestamp = "%Y-%m-%d %H:%M:%S ". syslog_facility = mail ssl_listen = 142.46.193.6 ssl_disable = no ssl_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem ssl_key_file = /etc/ssl/private/ssl-cert-snakeoil.key mail_location = mbox:~/mail:INBOX=/var/virtual/%d/mail/%u mail_privileged_group = mail mail_debug = yes protocol imap { login_executable = /usr/lib/dovecot/imap-login mail_executable = /usr/lib/dovecot/rawlog /usr/lib/dovecot/imap mail_executable = /usr/lib/dovecot/gdbhelper /usr/lib/dovecot/imap mail_executable = /usr/lib/dovecot/imap imap_max_line_length = 65536 mail_max_userip_connections = 20 mail_plugin_dir = /usr/lib/dovecot/modules/imap login_greeting_capability = yes } protocol pop3 { login_executable = /usr/lib/dovecot/pop3-login mail_executable = /usr/lib/dovecot/pop3 pop3_enable_last = no pop3_uidl_format = %08Xu%08Xv mail_max_userip_connections = 10 mail_plugin_dir = /usr/lib/dovecot/modules/pop3 } protocol managesieve { sieve=~/.dovecot.sieve sieve_storage=~/sieve } mail_plugin_dir = /usr/lib/dovecot/modules/lda auth_executable = /usr/lib/dovecot/dovecot-auth auth_process_size = 256 auth_cache_ttl = 3600 auth_cache_negative_ttl = 3600 auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ auth_verbose = yes auth_debug = yes auth_debug_passwords = yes auth_worker_max_count = 60 auth_failure_delay = 2 auth default { mechanisms = plain login passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb sql { args = /etc/dovecot/dovecot-sql.conf } socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } master { path = /var/run/dovecot/auth-master mode = 0600 } } } Please, if you require anything do not hesistate, I will post it ASAP. Any help or suggestions are greatly appreciated! Thanks, Pierre

  Read the article

• Top ten security tips for non-technical users

  - by Justin

  I'm giving a presentation later this week to the staff at the company where I work. The goal of the presentation is to serve as a refresher/remidner of good practices that can help keep our network secure. The audience is made up of both programmers and non-technical staff, so the presentation is geared for non-technical users. I want part of this presentation to be a top list of "tips". The list needs to be short (to encourage memory) and be specific and relevant to the user. I have the following five items so far: Never open an attachment you didn't expect Only download software from a trusted source, like download.com Do not distribute passwords when requested via phone or email Be wary of social engineering Do not store sensitive data on an FTP server Some clarifications: This is for our work network These need to be "best practices" tips for the end-user, not IT policy We have backups, OS patches, firewall, AV, etc, all centrally managed This is for a small business (less than 25 people) I have two questions: Do you suggest any additional items? Do you suggest any changes to existing items?

  Read the article

• No Editor in Directory Utility

  - by Christian Macht

  I'm on OSX 10.6.8 and would like to enable the root user. I found Apple's KB article, however this point Click the lock in the Directory Utility window. Enter an administrator account name and password, then click OK. Choose Enable Root User from the Edit menu. is not possible, because there is no "Edit Menu" Icon! I'm logged in as admin, but I only see "Services" and "Search Policy". Repeat, I do not see the "Editor", it's just not there. What gives? How it should be: Directory Utility

  Read the article

• upgraded to OSX 10.6.6 - now cannot sudo

  - by rahulk

  I've been using sudo until now. After an upgrade to 10.6.6, now sudo gives me incorrect password. My user has admin rights, and i can execute admin functions from the GUI (such as System Prefs, updating software etc). However, within Terminal, sudo has stopped accepting the password. I have repaired permissions and restarted. Some pointers ask me to use Directory Utility, but in this version it does not have a "set root user" option. I downloaded ServerAdminTool 10.5.7 but this does not work on my system. Some say to add myself to "wheel" group, but i need sudo for that. Some say if i am in admin group, i should be able to sudo, but this is not happening. (Using OS X Snow Leopard 10.6.6, earlier 10.5.8) MODERATOR: please delete this question. The issue had to do with Textpander expanding the password resulting in sudo failing. Not an OS upgrade issue.

  Read the article

• Is it possible to mount a hot-swappable drive when it is turned on?

  - by John

  In my PC, I have a hot-swap drive. Usually I keep it off to save power. I only really use it when accessing from another PC on the network. Is it possible to configure /etc/fstab to mount this drive when I turn it on (without having to shake the mouse, open file manager and click the drive to have it mounted? Currently, I have: UUID=a869e5ca-7d3b-4d64-91e2-eadbecd8c9e5 /media/i-TVShows ext4 rw,nosuid,nodev,auto,user,uhelper=udisks 0 0 in my /etc/fstab file but it doesn't seem to do the trick. I want the drive to be user-mountable, on power on, with RW access, and I'm thinking of adding 'nofail'...this is my first time writing to the fstab file, and a lot of the parameters I took from the output of 'mount' so feel free to correct any oddness you find. Thanks

  Read the article

• BES 5.0 and MAPI calls to exchange system

  - by nysingh

  We have been using BES 4.1(5) for a while now and it has been a resource hog on exchange due to high number of MAPI calls. I have heard that BES 5.0 is even worse. the comparison i heard is that BES 4.1 is makes MAPI calls equal to 5 outlook clients per BB user and BES 5.0 makes MAPI calls equal to 10 outlook clients per BB user. can someone confirm if it is true? is BES 5.0 is really that bad in MAPI calls and for exchange performance. ? thanks

  Read the article

• How to gain admin privileges on D-Link router if my isp is not allowing me to do so?

  - by Fischer

  So I switched to new ISP yesterday, they gave me a D-Link router, can't use my old router. I want to change the wireless password, went to 192.168.1.1, I can login with the the username and password user user, but not as admin. On the catalog it says that the default username and password are admin admin, tried that didn't work. Tried admin and no pass, tried many combinations, none worked. I asked some other users and they said that the isp is blocking the users from logging in as admins, and blocking the reset button, and said that there's a hack where you do something like: cmd telnet "router ip" and do something like dumpcfg. Could you please give a better explanation on how to gain admin privileges on your own router if your isp is not letting you do so by default?

  Read the article

• Merge only a one remote branch into a local branch with Mercurial

  - by Pepijn

  I wan to manage some profiles as XML files in Mercurial repos. The setup I'm thinking of: Each user has a repo with a branch where he manages his own profile, and a number of branches where he can pull and merge other profiles from that branch of another user. So for example I have my own profile branch and a branch labeled friends, in which I want to pull the profile branches of a few remote repos, to collect like a collection of profiles. I figured out that since the repos are unrelated I need to use -f, but I can't figure out how to pull and merge only a single branch into another. So I want like me friend someone profile ---> friends <--- profile \-> family friends <--- profile Is this even possible? Should I use separate repos instead? Is there a better solution?

  Read the article

• Files listed by bash but unaccessible

  - by Cerin

  What would cause the following behavior on an Ubuntu 12.04 system? I've SSHed into a machine as the "ubuntu" user. Running ls -lah /data/* shows dozens of non-empty files (e.g. file1.txt, file2.txt, etc), all owned by the "ubuntu" user/group, and with full read/write access. If I try to cat /data/file1.txt, bash gives me the error "cat: /data/file1.txt: No such file or directory" In short, ls is listing files, but in every other way, the files essentially don't exist. I can't cat them or read them in any way. Even giving all the files 777 permission doesn't change anything. This is really bizarre. What's going on here?

  Read the article

• Getting rid of site-specific hotkeys

  - by ZyX

  How do I disable site-specific hotkeys if (and only if) they are already mapped in Opera? For example, I use <C-b> instead of <Right> and <C-h> instead of <BS>. On Stack Overflow/Super User they produce **strong text** and ## Heading ## respectively. I do not want this happen. I can examine Super User/Stack Overflow/some_other_site's javascript and write a userjs to do the job, but this method is not universal. I'm using Opera-10.51_pre6252 in Gentoo Linux.

  Read the article

• Outlook 2007 VBA/Macro

  - by user27538

  Hi, I am a very basic user new to macros and vba. My problem is that I recive online orders to which i need to click an auto generated unique order hyperlink to confirm receipt of the order within a specified time period. This is a mundane task having to be on 'standby' and was wondering if there was a way to have this link automatically clicked when the email arrives. Just to reiterate the link has a unique reference and is different on each email. Please bare in mind that I am a very basic user and would probably require step by step instructions. Many thanks in advance

  Read the article

• To Do list for multiple users using MySQL, Need some advice regarding Projectwork?

  - by Steve

  i am thinking to create a To Do list sort of thing for my Project work. it's sort of a To do list type thing, meant for Multiple Users. i mean each user will have his Login and Password , to access into his account or profile and from there he/she can Manage his own To-Do list. it's has to be Kind of like Remember the Milk sort of. Every user will have his own To Do list. i mean now as Different users will have Different To Dos to perform and so different To Dos Lists, if for data fields like in tabular form. Task || Priority || Deadline || Number of days required ||Status. -----||----------||----------||-------------------------||-------------------- -----||----------||----------||-------------------------||-------------------- -----||----------||----------||-------------------------||-------------------- So what i meant to ask , Can this type of thing be done using MySQL as database and and any web based server side language PHP, ASP, JSP. i mean Can this be done through RDBMS like MySQL, for here different member users will have different to do lists than each others to keep and maintain.

  Read the article

• Trouble setting up PATH for Java on Debian

  - by milkmansrevenge

  I am trying to get Oracle Java 7 update 3 working correctly on Debian 6. I have downloaded and set up the files in /usr/java/jre1.7.0_03. I have also set the following two lines at the end of /etc/bash.bashrc: export JAVA_HOME=/usr/java/jre1.7.0_03 export PATH=$PATH:$JAVA_HOME/bin Logging in as other users and root is fine, Java can be found: chris@mc:~$ java -version java version "1.7.0_03" Java(TM) SE Runtime Environment (build 1.7.0_03-b04) Java HotSpot(TM) 64-Bit Server VM (build 22.1-b02, mixed mode) However there are two cases where Java cannot be found as detailed below. Note that both of these worked fine when I have previously installed OpenJDK Java 6 via aptitude, but I need Oracle Java 7 for various reasons. Most importantly, I cannot run commands as another user via su, despite the PATH showing that Java should be present. The user was created with adduser chris root@mc:~# su chris -c "echo $PATH" /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/java/jre1.7.0_03/bin:/bin root@mc:~# su chris -c "java -version" bash: java: command not found root@mc:~# su chris -c "/usr/java/jre1.7.0_03/bin/java -version" java version "1.7.0_03" ... How can it be in the PATH but not be found? Update 05/04/2012: explained by Daniel, to do with it being a non-interactive shell so files such as /etc/profile and /etc/bash.bashrc are not executed. Doing a full swap to that user and running Java works: root@mc:~# su chris chris@mc:/root$ java -version java version "1.7.0_03" ... I run a script on start up which exhibits similar but slightly different problems. The script is located in /etc/init.d/start-mystuff.sh and calls a jar: #!/bin/bash # /etc/init.d/start-mystuff.sh java -jar /opt/Mars.jar I can confirm that the script runs on start up and the exit code is 127, which indicates command not found. Inserting a line to print/save the PATH shows that it is: /sbin:/usr/sbin:/bin:/usr/bin This second problem isn't as important because I can just point directly to the Java executable in the script, but I am still curious! I have tried setting the full PATH and JAVA_HOME explicitly in /etc/environment which didn't help. I have also tried setting them in /etc/profile which doesn't seem to help either. I have tried logging in and out again after setting PATH in the various locations (duh!). Anyway, long post for what will probably have a simple one line solution :( Any help with this would be greatly appreciated, I have spent far too long trying to fix it by myself. Motivation The first problem may seem obscure but in my system I have users that are not allowed SSH access yet I still want to run processes as them. I have a ton of scripts operating in this way and don't want to have to change them all.

  Read the article

• Sync iPhone Mail with Webmail

  - by João Paulin

  I had an email account [email protected] hosted on Host A. This mailbox had 100 messages. I wanted to migrate to Host B, so I download all the 100 messages from Host A on my iPhone. Now that my site was successfully migrated to Host B and the email account [email protected] was created again (the mailbox is empty), how can I send the messages that I have downloaded on my iPhone to the mailbox on Host B? Note that the migration from Host A to Host B did not change the IMAP and SMTP adressess and parameters. I'm still using the same addresses, parameters and ports as before. The email accounts just switched hosting.

  Read the article

• recover files from encrypted home folder

  - by maskiepop

  I can't seem to find the answer to my questions -- hence my posting this here. 1) I have encrypted my home folder in LinuxMint 15 Cinammon x64. If I create images of LM's partitions via fsarchiver, how do I go about selectively restoring home folders, and files from the FS images? 2) I haven't done this yet; but can I restore another users home folder into another user; both unencrypted. Is that a fairly common thing to do in Linux/ubuntu? I mean is the process fairly straightforward? What if the home folder I want to copy over to another user is encrypted? Thx

  Read the article

• Ubuntu Newbie Needs Assistance!!

  - by Steve Greene

  New Ubuntu User Needs Help!- version 9.10 does not communicate with laptop Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, even when sitting directly under the wireless router at the local library (literally), which puts out a wickedly-fast signal that my Windows Vista OS auto-detects and immediately connects to. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all, even though I am only a few feet from the router. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I desparately wish to convert to Ubuntu. I used Mac for ten years, and then Windows for ten years. Now, after 20 years, I want to live out my days as an open-source Ubuntu fanatic. I am ready to give the old status quo the boot! I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch so that I can move on in total Ubuntu bliss? My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System. I am running Windows Vista Home Basic, Service Pack 2. My current email is [email protected] if you have a workable solution that does not require programmer status to implement. Surely this must be a simple fix that I simply am overlooking, but being the new guy on the block, I have yet to be enlightened. Thanks for your help in coming up to speed!! Steve Wanna' be Ubuntu Fanatic "If you're not living on the edge, you're taking up too much space."

  Read the article

• Microsoft Word Document Recovery seems unresolvable

  - by LarsTech

  We work on a server (Windows Server 2003 Enterprise) that a bunch of us developers remote in using Remote Desktop Connection, and now every "other" time I open up word I get this Document Recovery pane: As you can see, "Delete" and "Show Repairs" are disabled (I don't think this is my document). "Open" or "Save As" works, but it never marks this document recovered, it just keeps coming up every "other" time I open up word. I don't even care about this document. How can I remove this document from the list so that it doesn't come up anymore? Update: As per Moab's comment, I had the user delete the file. But the Document Recovery still shows up with that item every other time Word is opened. The only difference now is that clicking on "Open" produces this (obvious) message: How can I clear this list? BTW, the user that owned this document was never getting the Document Recovery pane.

  Read the article

• Malware - Technical anlaysis

  - by nullptr

  Note: Please do not mod down or close. Im not a stupid PC user asking to fix my pc problem. I am intrigued and am having a deep technical look at whats going on. I have come across a Windows XP machine that is sending unwanted p2p traffic. I have done a 'netstat -b' command and explorer.exe is sending out the traffic. When I kill this process the traffic stops and obviously Windows Explorer dies. Here is the header of the stream from the Wireshark dump (x.x.x.x) is the machines IP. GNUTELLA CONNECT/0.6 Listen-IP: x.x.x.x:8059 Remote-IP: 76.164.224.103 User-Agent: LimeWire/5.3.6 X-Requeries: false X-Ultrapeer: True X-Degree: 32 X-Query-Routing: 0.1 X-Ultrapeer-Query-Routing: 0.1 X-Max-TTL: 3 X-Dynamic-Querying: 0.1 X-Locale-Pref: en GGEP: 0.5 Bye-Packet: 0.1 GNUTELLA/0.6 200 OK Pong-Caching: 0.1 X-Ultrapeer-Needed: false Accept-Encoding: deflate X-Requeries: false X-Locale-Pref: en X-Guess: 0.1 X-Max-TTL: 3 Vendor-Message: 0.2 X-Ultrapeer-Query-Routing: 0.1 X-Query-Routing: 0.1 Listen-IP: 76.164.224.103:15649 X-Ext-Probes: 0.1 Remote-IP: x.x.x.x GGEP: 0.5 X-Dynamic-Querying: 0.1 X-Degree: 32 User-Agent: LimeWire/4.18.7 X-Ultrapeer: True X-Try-Ultrapeers: 121.54.32.36:3279,173.19.233.80:3714,65.182.97.15:5807,115.147.231.81:9751,72.134.30.181:15810,71.59.97.180:24295,74.76.84.250:25497,96.234.62.221:32344,69.44.246.38:42254,98.199.75.23:51230 GNUTELLA/0.6 200 OK So it seems that the malware has hooked into explorer.exe and hidden its self quite well as a Norton Scan doesn't pick anything up. I have looked in Windows firewall and it shouldn't be letting this traffic through. I have had a look into the messages explorer.exe is sending in Spy++ and the only related ones I can see are socket connections etc... My question is what can I do to look into this deeper? What does malware achieve by sending p2p traffic? I know to fix the problem the easiest way is to reinstall Windows but I want to get to the bottom of it first, just out of interest. Edit: Had a look at Deoendency Walker and Process Explorer. Both great tools. Here is a image of the TCP connections for explorer.exe in Process Explorer http://img210.imageshack.us/img210/3563/61930284.gif

  Read the article

• Automatically connect to VPN when initiating RDP Remote Desktop connection and then disconnect VPN when done

  - by Josh Newman

  I know I can create a batch file to initiate a VPN connection followed by an RDP session, however I want to know if it's possible (in Windows 7 and ideally Windows XP as well) to have the VPN connection tied to the RDP session status. Scenario: user has to VPN first in order to be able to RDP. Ideally user would click one icon (batch file?) to initiate VPN connection and load RDP session. When they close the RDP session I want the VPN to then automatically disconnect so they don't accidentally route their subsequent non-RDP browsing + Internet activity through the VPN.

  Read the article

< Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >