Search Results

Search found 20997 results on 840 pages for 'adobe ideas'.

Page 352/840 | < Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359 | Next Page >

How can I make my monitor run at it's native resolution under Kubuntu 9.10?

- by Adam Matan

Hi, I have installed Kubuntu 9.10 afresh on an HP desktop computer with a Samsung SyncMaster 2243 and Intel integrated graphics card. The screen resolution is fixed on 1280x1024 instead of the native 1680x1050, which makes my eyes bleed. $ lspci -k |grep "VGA" -A2 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) Kernel driver in use: i915 Kernel modules: i915 and my xorg.conf: /etc/X11$ cat xorg.conf Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" EndSection Any ideas how to make this driver work? I found no working solutions on Google searches. Thanks, Adam

Read the article
Trixbox CentOS Default GW Problem (Multi-homed server)

- by slashp

I'm having an issue with a CentOS trixbox server which is dual-homed (one private facing NIC [eth1], one internet-facing NIC [eth0]). I can't seem to get the default gateway to set properly to our ISP's GW via eth0. I've modified the /etc/sysconfig/network to contain both a GATEWAY & GATEWAYDEV line and removed the GATEWAY line from /etc/sysconfig/network-scripts/ifcfg-eth1 (as well as /etc/sysconfig/network-scripts/ifcfg-eth0). No default GW shows up in the routing table unless it's specified in the ifcfg-eth1 file (which both the wrong interface and wrong gateway IP), otherwise, the routing table simply does not contain a default gateway..any ideas would be greatly appreciated! Thanks! EDIT Just realized when attempting to add the default gateway manually using the route add command, I receive an error stating: SIOCADDRT: Network is unreachable I know this error can occur when your default gateway and interface IP address are not on the same subnet..in this case, my public IP address of eth0 is a /29.

Read the article
sysprep'd Server 2008 R2 VMware autocheck BSODs

- by slag

I'm trying to set up a template Server 2k8 R2 (Standard) VM in our VMware ESXi environment, we'll need to deploy a whole lot of them and I want to (a) streamline and (b) standardise the server build process. Originally I built a sysprep answer file using WAIK and the Windows System Image Manager - once I'd run sysprep using this, restarting the machine resulted in a "autochk.exe not found - skipping autocheck" message, followed almost immediately by a BSOD. Rebooting just resulted in the same thing. I first assumed it was my answer file, but have now checked this on a physical machine and it works fine. I've reinstalled the OS on the machine (and NOTHING else), and run sysprep.exe (ticking Generalize) - this produces exactly the same result. I've also attempted to use the Customisation Wizard built in to VMware - again, the same autocheck message and BSOD is the result. Any ideas? Let me know any further information I need to provide...

Read the article
Windows 7 Not Booting After Moving Partition

- by Guillermo Phillips

I have a Sony Vaio laptop. After using GParted to move the primary Windows partion, the laptop no longer boots, saying 'Operating system not found'. I don't have a recovery disc and the only other machine I have access to is a Mac Mini. I have tried creating a bootable USB using the recovery ISO from Microsoft. I can see all the files on the USB stick from my Mac. I followed the instructions here: http://borgstrom.ca/2010/10/14/os-x-bootable-usb.html I have set the laptop BIOS boot order to be 'External' first, but the laptop refuses to boot from the USB stick. I have previously been able to boot from a linux installation on the USB stick. Any help or ideas would be appreciated.

Read the article
Executed PHP files are stale unitl "touched" (Symlinked NFS mount as web root)

- by mmattax

We have a PHP application that has 3 web servers (running Nginx and Apache). The web server's directory root are symlinked directories that point to an NFS mount. For example: web01 has an NFS mount at /data/webapp, which is symlinked to /home/webapp. Apache serves content from /home/webapp/www. We also use ACP for our PHP opcode cache. When we deploy code, we SCP an archive file to the NFS server and extract it. Since upgrading RedHat 6, when we deploy our code the webserver execute "stale" PHP files until touch is run on the PHP files. We thought that APC might be causing a problem, but the issue exists, even after clearing the opcode cache. Any ideas on how to diagnose why the stale PHP code is being executed?

Read the article
Permanent death in a MUD (think command line MMORPG)

- by Luke Laupheimer

I have considered writing a MUD for years, and I have a lot of ideas my friends think are really cool (and that's how I'd hope to get anywhere -- word of mouth). Thing is, there's one thing I have always wanted, that my friends and strangers hated: permanent death. Now, the emotional response I get to this is visceral revulsion, every time. I'm pretty sure I am the only person that wants this, or if I'm not, I'm a tiny minority. Now, the reason I want it is because I want the actions of the players to matter. Unlike a lot of other MUDs, which have a set of static city-states and social institutions etc, I want the things my players do, should I get any, to actually change the situation. And that includes killing people. If you kill someone, you didn't send them to time out, you killed them. What happens when you kill people? They go away. They don't come back in half an hour to smack talk you some more. They're gone. Forever. By making death non-permanent, you make death not matter. It would be similar if a climax to a character's arc is getting a speeding ticket. It cheapens it. Non-permanent death cheapens death. How can I: 1) Convince my players (and random people!) that this is actually a good idea?, or 2) Find some other way to make death and violence matter as much as it does in real life (except within the game, of course) sans character deletion? What alternatives are there out there?

Read the article
HP Photosmart 7450 Prints Noise On Windows 7 Pro 64-bit

- by David Mackintosh

I have received a working (in its last location) HP Photosmart 7450 printer. I connected it up to my Windows 7 Pro 64-bit workstation, and the driver was (apparently) installed. The problem is that whenever I try to print from it -- test page, text from notepad, picture, whatever -- it spins through a half dozen sheets of paper, some of which have fractions of text on them, but most of which are either blank or have line noise printed on them. Noise similar to what was printed out on ye olde laserjet printers when the postscript interpreter failed. HP's web site only has a "use the included driver in Windows 7, be happy" instruction. The driver has been removed and added several times. The printer was previously attached to a XP Home computer and worked correctly without incident. Does anyone have any ideas for troubleshooting before I drop this printer in the river?

Read the article
HP Envy 15 3040nr sound issues

- by Lenny

I have successfully set up my Envy 15" for Ubuntu 12.04 except for the sound, anyone have any ideas about how to get it working? I had to blacklist snd-usb-audio to my alsa to stop pulseaudio from freezing on login and logout, but now no sound plays. Could anyone provide me with some guidance? lspci info 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:01.2 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler [AMD Radeon HD 6600M Series] 09:00.0 Network controller: Intel Corporation Centrino Advanced-N 6230 (rev 34) 0a:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 10:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) 11:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)

Read the article
SSH Tunnel for Remote Desktop via Intermediary Server

- by Mihai Todor

I've seen many examples of SSH tunnels on the nets, but I'm still having no luck with this. Here's the setup: Windows 7 PC in a private network, sitting behind a firewall, with PowerShellInsider SSH server set up and working fine. Public access Linux server, which has access to the PC. Windows 7 laptop, at home, from which I wish to do remote desktop on the PC. Now, here's what I've tried so far: SSH tunnel from my laptop to the Linux server: ssh -f my_user@LINUX_SERVER -L 6666:LINUX_SERVER_IP:6666 -N SSH to the Linux server where I've set up a tunnel to the PC: ssh -f 'PRIVATE_DOMAIN\my_user'@PC_NAME -L 6666:PC_IP:3389 -N Unfortunately, I must be doing something wrong, because it doesn't seem to work. Any ideas why or, at least, any suggestions on how can I try to debug this setup? At the moment, I have access to all 3 machines (non-root on Linux), so I can test whatever I want...

Read the article
MVC + 3 tier; where ViewModels come into play?

- by mikhairu

I'm designing a 3-tiered application using ASP.NET MVC 4. I used the following resources as a reference. CodeProject: MVC + N-tier + Entity Framework Separating data access in ASP.NET MVC I have the following desingn so far. Presentation Layer (PL) (main MVC project, where M of MVC was moved to Data Access Layer): MyProjectName.Main Views/ Controllers/ ... Business Logic Layer (BLL): MyProjectName.BLL ViewModels/ ProjectServices/ ... Data Access Layer (DAL): MyProjectName.DAL Models/ Repositories.EF/ Repositories.Dapper/ ... Now, PL references BLL and BLL references DAL. This way lower layer does not depend on the one above it. In this design PL invokes a service of the BLL. PL can pass a View Model to BLL and BLL can pass a View Model back to PL. Also, BLL invokes DAL layer and DAL layer can return a Model back to BLL. BLL can in turn build a View Model and return it to PL. Up to now this pattern was working for me. However, I've ran into a problem where some of my ViewModels require joins on several entities. In the plain MVC approach, in the controller I used a LINQ query to do joins and then select new MyViewModel(){ ... }. But now, in the DAL I do not have access to where ViewModels are defined (in the BLL). This means I cannot do joins in DAL and return it to BLL. It seems I have to do separate queries in DAL (instead of joins in one query) and BLL would then use the result of these to build a ViewModel. This is very inconvenient, but I don't think I should be exposing DAL to ViewModels. Any ideas how I can solve this dilemma? Thanks.

Read the article
How to connect two ubuntu computers with ethernet cable

- by Lukasz Zaroda

I'm trying to connect with ethernet cable two computers - desktop and laptop. What I want to do is transfer a lot of data from one to another. The problem is that I'm doing everything from: How to network two Ubuntu computers using ethernet (without a router)? But after that, ping always gives me "Destination host unreachable". I was searching a while but couldn't figure out what is a reason it doesn't work, maybe it's something about my devices or maybe someone will have another idea. Ethernet cable I got with my router. There is a text printed on it: Aurit Data Cable Cat.5 UTP 26AWG 4PAIR AWM PUC 75°C EIA/TIA 568B It's connecting now my desktop to router, so I can send this question. My desktop: System: Ubuntu 12.04 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) "ethtool -i eth0" output: driver: r8169 version: 2.3LK-NAPI firmware-version: rtl_nic/rtl8168d-1.fw bus-info: 0000:01:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: yes My laptop: System: Ubuntu 14.04 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 08) "ethtool -i eth0" output: driver: alx version: firmware-version: bus-info: 0000:01:00.0 supports-statistics: no supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no My iptables are accepting everything. Any ideas why I cannot reach other computer?

Read the article
My search what the Cloud will mean for my Work

- by Kay Sellenrode

Since I finished my MCM Exchange 2007 training back in April 2009 I’m struggling with the Cloud. I know it will change the way we do things today, but how will it affect my work. My work is Exchange consultancy mostly in the Netherlands, but more and more across the globe. In my job as a consultant I noticed last year that a large percentage of my customers showed interest in the cloud services available today. But in most situations it seemed that it wasn’t the right time for them to switch to a cloud service at this moment. Right now I’m helping one of my customers is exploring Exchange online and it looks like they will switch over from their on-premise Exchange solution. This made me more than ever realize that I need to do something to not miss the boat. With Office 365 coming this year, my idea is that Cloud services will take off from now. Also I’m sure that quite some customers will expect me to help them with their decision between the cloud and the on premise solution. So in the next months I will explore all the possibilities of Office 365, but also some of the competition in this field. In my search for what the cloud will mean for me and my customers, I will go over all the aspects of the offered solutions. Any help in my search is always welcome. I’m looking forward to ideas people have around the cloud and how it will change the IT environment, especially in the Unified communications field. Next week I will post my first article about my experiences with the cloud until now.

Read the article
Group policy preventing XenApp from creating start menu menus

- by JohnyV

I have a citrix Xenapp server that has some apps installed. The are placed in a folder and set to populate the start menu. The problem is when I log on with a user from a particular OU I am unable to get the start menu inserted from xenapp. It is quite a restrictive group policy but does anyone know the setting for preventing users from modifying the start menu. I have tried "Prevent changes to Taskbar and Start Menu Settings" but this didnt work. Any ideas would be great. I know it isnt permissions because I have another user that has the same permissions assigned to them, the only difference is that one user gets the restrictive group policy and the other doesnt. Thanks

Read the article
Set 802.1Q tagged port on VLAN1 on Dell PowerConnect switch

- by Javier

I'm having big troubles when adding this Dell switch to my network. Here we use several VLANs to segment traffic. All switches (3com and DLink mostly) have configured the same VLANs, most ports are 'untagged' and belong to a single VLAN, except for the ports used to join together the switches (in a star topology), these ports belong to all VLANs and use 802.1Q tags. So far, it works really well. But on this new switch (a Dell PowerConnect 5448), the settings are very different (and confusing). I have configured the same VLANs, an the uplink ports are set in 'general' mode (supposed to be fully 802.1Q compliant), I can set the VLAN membership as 'T' on these ports for all VLANs except VLAN 1. It always stay as 'U' on VLAN 1. Any ideas?

Read the article
Accessing C$ over LAN on Win2008R2 - cannot by hostname but can by IP and FQDN

- by Idgoo

Having an issue with one of our Win2k8 R2 file servers. Trying to access C$ or the Admin share is giving us an error (see error details that the bottom), however we are able to connect using the server's IP and FQDN. can access \\172.16.x.x\c$ with domain cred can access \\server.domain.local\c$ with domain creds cannot access \\servername\c$ with same domain creds Server pings fine with Hostname, IP, FQDN, the Primary DNS suffix is also correct. DNS, PTR and Wins records are all correct for the Server I have checked that I am not trying to connect with cached credentials in the Windows vault, the server is also appending primary and connection specific DNS suffixes to the hostname. Any ideas what might be causing this issue? Error Details: c$ is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions

Read the article
How do I disable aalert beeps

- by wheresrhys

My HP pavilion laptop is getting pretty old and the speakers no longer work properly. So I've disabled all audio devices, including disabling the light-touch volume controls at boot-up. The one sound still here that I can't get rid of is teh alert beep whenever there's an error. It's annoying at the best of times, but when your laptop has no other sounds at all it's intensly irritating! Nothing I chaneg in the windows settings or in the BIOS seems to have any effect. Any ideas how to switch them off?

Read the article
Class hierarchy problem in this social network model

- by Gerenuk

I'm trying to design a class system for a social network data model - basically a link/object system. Now I have roughly the following structure (simplified and only relevant methods shown) class Data: "used to handle the data with mongodb" "can link, unlink data and also return other linked data" "is basically a proxy object that only stores _id and accesses mongodb on requests" "it looks like {_id: ..., _out: [id1, id2,...], _inc: [id3, id4, ...]}" def get_node(self, id) "create a new Data object from the underlying mongodb" "each data object can potentially create a reference object to new mongo data" "this is needed when the data returns the linked objects" class Node: """ this class proxies linking calls to .data it includes additional network logic operations whereas Data only contains a basic database solution """ def __init__(self, data): "the infrastructure realization is stored as composition by an included object data" "Node bascially proxies most calls to the infrastructure object data" def get_node(self, data): "creates a new object of class Object or Link depending on data" class Object(Node): "can have multiple connections to Link" class Link(Node): "has one 'in' and one 'out' connection to an Object" This system is working, however maybe wouldn't work outside Python. Note that after reading links Now I have two questions here: 1) I want to infrastructure of the data storage to be replacable. Earlier I had Data as a superclass of Node so that it provided the neccessary calls. But (without dirty Python tricks) you cannot replace the superclass dynamically. Is using composition therefore recommended? The drawback is that I have to proxy most calls (link, unlink etc). Any thoughts? 2) The class Node contains the common method .get_node which is used to built new Object or Link instances after reading out the data. Some attribute of data decided whether the object which is only stored by id should be instantiated as an Object or Link class. The problem here is that Node needs to know about Object and Link in advance, which seems dodgy. Do you see a different solution? Both Object and Link need to instantiate one of all possible types depending on what the find in their linked data. Are there any other ideas how to implement a flexible Object/Link structure where the underlying database storage is isolated?

Read the article
MWS2K8R2: Enabling Media Sharing using Streaming Media Services Role

- by TheLizardKing

So I have a Microsoft Windows Server 2008 R2 that stores a large collection of media (mostly mp3s) and I want to be able to deliver these files using a server/client setup with Windows Media Player being the client. I downloaded and installed Streaming Media Services Role. I even setup a publishing point with on-demand access. My issue is I can connect using WMP12 but it only connects as more of a stream and not a shared library. I can pause/play/skip as if it's a powerful radio station which is ok in my book but what I'd really like to do is allow me to control my music remotely, search and play for artists, maybe create playlists (not required but nice) and even connect it to an xbox. Is Streaming Media Services Role not what I should be using for this? Would installing WMP and sharing using that mechanism be a better option? Any Ideas?

Read the article
What kind of website or coding is suitable and safe for an artist's website

- by Dan S

I have a web design project that is related to a singer, and I used Joomla for my previous project and designed good music websites. But for this project I cannot find a suitable template to edit and use. As the website is so simple and does not have any special functionality, I'm thinking about creating a website with just simple CSS, html and jQuery. I'm Good at them and can make a perfect look but I am not sure about the security. In Joomla I use different security plugins but do not know about a client-side scripting. So generally I need your ideas, about the following questions: - Is Joomla and generally CMS a good option for a music website? - How famous artists' website is base on? CMS or Client-side scripting? - Do you recommend to create it manually without using and CMS or template? - An do you suggest WordPress for this type of websites? (The website will have these pages: Biography, News, Music (with a music player), Photos, videos and contacts). That's it! Thank you for all your responds, I had a look at Joomla and the only template I chose is This One which seems very simple, and I am worry about module position, because it seems does not have any module position at all. I tried to contact the provider but did not get any respond. Does anyone know about its module position, I mean is there any way to find them? An is it possible to create a 2-3 module positions? Also I had a look at ThemeForest's WordPress templates and it has such a great template. I think WordPress is more active in creating artistic templates. But is it secure and professional to use this CMS for a singer who is kinda famous it his country? I am talking about a template like this. Share your opinions guys.

Read the article
Windows Server 2008R2 IIS7.5, Requests getting 401 status

- by TLBH

We have a web site running in windows server 2008r2 iis7.5 and we are seeing several errors reported from our global error handler saying that "Request Timed Out". I matched up one to the IIS log file and see the request took 135116 (presumably milliseconds) had an sc-status of 401 an sc-sub0status of 0 and an sc-win32-status of 64. 2 requests failed in these way but lots of surrounding requests (1979 successful requests vs 2 fails) for the same user went through perfectly fine- with the same cs-username which makes a 401 seem a little odd. The target of the requests is an ASP.Net web service's web method called by the .net client library- it's called a lot of times per user (3 times per second) to keep a page updated. We're getting some users reportng seeing a freezing effect and I think this may be the cause, any ideas? Peter

Read the article
Why is this static routing not working ?

- by geeko

Greeting gurus, I'm trying to develop a DHCP enforcement extension like Microsoft NAP. My trick to block dynamic-IP requesting machines (that don't meet certain policy) is to strip the default gateway (no default gateway) stated in the IP lease and set the lease subnet mask to 255.255.255.255. Now I need the blocked machines to be able to reach some specific locations (IPs) on the network. To allow for this, I'm including some static routes in the lease. For example, I'm including 10.10.10.11 via router 10.10.10.254 (the one to which the blocked machine that needs to access 10.10.10.11 is connected). Unfortunately, as soon as I set the default gateway to nothing, blocked machines cannot reach any of the added static routes. I also tried classless static routes. Any ideas ? any one knows how MS NAP actually do it ? Geeko

Read the article
Windows 2000 under Windows 7 Virtual PC not working correctly

- by dave

I have just moved my Windows 2000 Virtual PCs from Vista to Windows 7 Professional (64-bit). The machines work to a point but I have found some problems: drive mapping does not seem to work any more. I need this to exchange data. I do not need network access to the virtual PC so would rather leave it unconnected. the virtual PC would automatically shutdown the session and go to the login screen after a few minutes of inactivity. I tried installing the Virtual PC Integration Components but the install failed (one of the messages basically says it's XP+ only). Now I'm stuck in 640x480 mode with mouse capture. I have heard that you can install an older version of the Integration Components but this sounds a bit suspect. Does anyone have any ideas on how to get Windows2000 working with drive sharing on a Virtual PC?

Read the article
Calendar shows lighter/greyed out items

- by ACarter

Here's a screenshot of my Windows 8.1 Calendar. As you can see, some of the items appear lighter/greyed out (ie on the 15th, 21st). Why is this? I have not noticed any difference between these items, and none of the ideas I've had for why (ie items without a specific time are lighter) have fitted. My calendar is synced to hotmail. The calendar online (hotmail.co.uk). (There are a couple of new events, but nothing should have changed with the earlier ones.) This event appears lighter. But this event does not.

Read the article
Windows 7 Media Player won't add MP3 files

- by AnthonyWJones

I have a set of MP3 files that Windows Media Player just refuses to add to the library. They are placed in the standard My Music folder. I play them in media player. They just won't be listed in the library. I've tried dragging them and dropping them on the media player but they still don't appear in the library. I have an identical laptop where I've also copied the mp3 files and they appear in the library fine. Any ideas what would cause this?

Read the article
Can I make Apache drop a connection when matching a URL?

- by PP

Using mod_rewrite I can construct a rule to respond with a clean error code (e.g. 404 not found, 410 gone, or 403 unauthorised) when a page is requested that I don't want to serve. But frequently I get completely erroneous requests from hackers scanning my website for vulnerabilities or possibly cross-site scripting attempts. For these customers I do not want to return a clean error - I'd rather do something else like immediately drop the connection with no response or, alternatively, hold the connection open for a lengthy period of time to frustrate the automated process. Any ideas how to accomplish this with Apache? I've read that nginx has the ability to immediately terminate a connection when a particular pattern is matched.

Read the article

< Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359 | Next Page >