Search Results

Search found 13151 results on 527 pages for 'performance counters'.

Page 352/527 | < Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >

• Few questions about SLI

  - by toomanyairmiles

  Hi all, thanks in advance for your help. I've just added a second card to my system so I can add a third monitor. I'd got as far as determining both cards need to use the same driver (after a blind alley with another cheap ATi card) so I'm now the proud owner of a second BFG 9800 GTX+ card. One is a BFG OCX and the other an BFG OC (small difference in clock speeds but they are in all other respects the same) but wanted to know the following:- 1) Is it worth adding the SLI connector, will it really boost overall performance (I'm guessing that the OCX card will then perform as the OC card does)? 2) Are SLI connectors (the one's that run across the top of the cards) motherboard or manufacturer specific? 3) If I do SLI the cards will I still be able to use all four monitor connectors or just the two on the master card? I'm not a gamer, I'm an IA and web designer so the system is mostly for Photoshop and Illustrator work and the occasional knock around in command and conquer.

  Read the article

• What settings to use for fastest reloading of a MySQL backup?

  - by Alex R

  I have a MySQL database which dumps to a 3.5 GB backup (mysqldump) in about 10 minutes. But reloading this backup on a standby / test server takes upwards of 12 hours. What are some settings that would maximize reloading performance? The most promising appear to be innodb_buffer_pool_size, innodb_additional_mem_pool_size, and innodb_log_buffer_size... but I'm reaching the limits of my trial-and-error approach. Which of these settings "should" be the most important? Through trial-and-error I was not able to get more than 70% CPU utilization and 63% memory utilization. I'd like both at 100% during a reload. All tables are InnoDB.

  Read the article

• critical swap nagios

  - by Toby Joiner

  I installed nagios a very long time ago, and have started trying to use it now. I am getting this error: Current Status: CRITICAL (for 231d 16h 52m 49s) Status Information: SWAP CRITICAL - 100% free (0 MB out of 0 MB) Performance Data: swap=0MB;0;0;0;0 Current Attempt: 4/4 (HARD state) Last Check Time: 01-09-2011 13:26:34 Check Type: ACTIVE Check Latency / Duration: 0.125 / 0.004 seconds Next Scheduled Check: 01-09-2011 13:31:34 Last State Change: 05-22-2010 21:36:47 Last Notification: 01-09-2011 13:01:42 (notification 5521) Is This Service Flapping? NO (0.00% state change) In Scheduled Downtime? NO Last Update: 01-09-2011 13:29:32 ( 0d 0h 0m 4s ago) Is this normal? Should I be concerned? If more info is needed please let me know.

  Read the article

• Open Source Visualization and Dashboard Software

  - by helios

  I am working on an open source Application Performance Monitoring (APM) software and looking for a visualization tool with dashboard capabilities. I came across Graphite which looks pretty good but wondering if there is anything better out there before I settle down with that tool. Here's the list of features I am interested in: Must-Have Open Source license API to submit real time data Web-based visualization interface Persistence - file or database Nice-To-Have Dashboard Capabilities: Allow users to select a few metrics (CPU, Heap Usage, # of Active Users etc.) and place them on a single page for easier monitoring. Any suggestions?

  Read the article

• Timeouts when connecting to SQL Server since installing SP1 for Windows 7

  - by Julien

  Hi, I just installed SP1 for windows 7 and I have severe performance degradation when connecting to SQL Server 2005 since then. Establishing connection takes more than 30 seconds while it's instantaneous on another computer. Firewall is disabled and I didn't make any change to the configuration. It happens both when trying to connect with a hostname and with an ip address. Everything else seems to be fine (for instance, I'm have no issue connecting to other computers with remote desktop) What can cause such a problem? Thanks in advance! Edit : uninstalling the SP1 solves the issue instantly.

  Read the article

• Upgrading from MySQL Server to MariaDB

  - by Korrupzion

  I've heard that MariaDB has better performance than MySQL-Server. I'm running software that makes an intensive use of MySQL, thats why I want to try upgrading to MariaDB. Please tell me your experiences doing this conversion, and instructions or tips. Also, which files I should take care of for making a backup of MySQL-Server, so if something goes wrong with MariaDB, I could rollback to MySQL without issues? I would use this but i'm not sure if it's enough to get a full backup of MySQL-Server confs and databases mysqldump --all-databases backup /etc/mysql My Environment: uname -a (Debian Lenny) Linux charizard 2.6.26-2-amd64 #1 SMP Thu Sep 16 15:56:38 UTC 2010 x86_64 GNU/Linux MySQL Server Version: Server version 5.0.51a-24+lenny4 MySQL Client: 5.0.51a Statistics: Threads: 25 Questions: 14690861 Slow queries: 9 Opens: 21428 Flush tables: 1 Open tables: 128 Queries per second avg: 162.666 Uptime: 1 day 1 hour 5 min 13 sec Thanks! PS: Rate my english :D

  Read the article

• Make SoX not show output

  - by Ram Rachum

  I'm recording with SoX, and I want to make it not show output at all. When recording, it shows this output: Input File : 'default' (waveaudio) Channels : 2 Sample Rate : 48000 Precision : 16-bit Sample Encoding: 16-bit Signed Integer PCM In:0.00% 00:00:00.68 [00:00:00.00] Out:28.7k [ | ] Clip:0 I tried setting verbosity to 0, but it has no effect. (I'm guessing it's meant for messages other than this.) I don't just want to hide the output, which I could do easily; I want SoX to not generate it in the first place, for performance on a weak computer.

  Read the article

• Prevent Windows 7 from unpluging External HDD

  - by marverix

  I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

  Read the article

• Using Google's App Engine as CDN for static files

  - by Saif Bechan

  I am planning on moving my static files to Google's App Engine. I was wondering if this is a good idea to do. I have read that is it possible that Google will cache your files on multiple locations, which is a good thing in my opinion. The setup should also be quite easy in eclipse with the GAE plugins. But i still have my doubts on the performance of this. Is the setup of App Engine optimized for serving static content. Now I have Nginx server my static content, will App Engine perform the same way. Are there any other ups or downs using this method?

  Read the article

• Restricting permissions to individual documents on SharePoint

  - by wahle509

  Here's what I'm trying to do: I would like to create a list of documents on a site in my company's SharePoint site. Each document should have specific user's permissions to view and edit it. For example: The list is for performance reports. John has his out there called "John_PR_09.docx". Only him and his supervisor should have permissions to view, edit, or do anything to it. And then another employee has hers out there with permissions for only her and her supervisor, and so on... I have tested this out with a document that I removed the groups and users from (since they inherit permissions from it's parent) and only gave my user account permissions to. I then asked someone else to try and open and she could, she even wrote "TEST" on the document and saved it. What am I doing wrong? I thought I stopped it from inheriting permissions from it's parent and only gave myself rights to edit it.

  Read the article

• concrete uses of LDAP?

  - by ajsie

  im new to LDAP. i wonder what are some concrete examples of using LDAP. things that are MUCH more easier to do when you got 3-7 linux computers in a small company network. one use that is very important for me seems to be that you configure LDAP to handle system authentication. then you dont have to create same accounts in all computers. are there other things that are a MUST DO for a small network to save more time? my small network is for apache servers and database servers. and should LDAP be in an own machine? cause i guess its not good to put it in apache or database servers since these are performance dependent.

  Read the article

• Nexenta under KVM?

  - by Nick

  I have an Ubuntu Server running KVM. I'd like to get the benefits of ZFS so I was thinking of installing a virtual machine under KVM running Nexenta (or NexentaStor), allowing that virtual machine to have raw access to a couple of physical hard disks, and then having it share its file system with NFS so that Ubuntu can access it. I've never tried setting up KVM so that the virtual machine has access to physical drives. Does this sound feasible, and is there anything I need to watch out for? Has someone already documented something like this? Does Nexenta/ZFS function basically as well in the virtual environment as if they were running base bones? I can take a small performance hit, but I don't want it to not be as reliable because of the virtualization. Thanks.

  Read the article

• cygwin rsync over ssh very slow

  - by Waleed Hamra

  I have 2 machines running Windows Xp SP3. I have cygwin installed on both, version 1.7. I have rsync and ssh installed on both, and configured using default settings as per ssh-host-config and ssh-user-config programs provided. I moved the public keys into their respective locations, and basically ssh is working fine. i began an rsync operation, using: rsync -av --delete --hard-links local_dir username@other_machine:/some_dir well... on both machines, the processor is running near idle, no heavy usage. I checked IO using process explorer on both machines, and that too is at normal levels (1~2 MB/s), so I can't see where the bottlenecks are, because network performance is aweful. I'm not going over 1MB/s... when a normal file copy using windows sharing achieves some ~10 MB/s.. What could be wrong?

  Read the article

• How do I log file system read/writes by filename in Linux?

  - by Casey

  I'm looking for a simple method that will log file system operations. It should display the name of the file being accessed or modified. I'm familiar with powertop, and it appears this works to an extent, in so much that it show the user files that were written to. Is there any other utilities that support this feature. Some of my findings: powertop: best for write access logging, but more focused on CPU activity iotop: shows real time disk access by process, but not file name lsof: shows the open files per process, but not real time file access iostat: shows the real time I/O performance of disk/arrays but does not indicate file or process

  Read the article

• replace controller, add second controller, or use expander?

  - by longneck

  I have a Proliant DL380 G6 that I am re-purposing as a Hyper-V host for a new, off-site data center that will host our DR services. The server currently has a P410i controller with the 512MB BBWC module. The drives installed are SFF 6G 10K drives. I plan to add the HP 516914-B21 drive cage, which gives me 8 more SFF drives, bringing the total to 16. To get the additional 8 drives connected, I have one of three choices: Install a new controller that can support 16 drives. Install a second controller. Install a SAS expander, such as the HP 468406-B21 recommended by HP's spec sheet for my server. My question is: how do I know if I'm going hit a performance ceiling by putting 16 drives on the P410i or using the expander? And if I am, how do I select an appropriate controller? I'm not sure what specifications I should be looking at.

  Read the article

• Access points fighting for dominance?

  - by Phillip Oldham

  We have a small office with a large number of wireless devices (a mixture of desktop machines, laptops, and wifi-enabled phones) all working from a single Apple Airport Extreme which extends our wired network. I've added another Airport Extreme for resiliency, since we've been seeing a decrease in performance and (as far as I understand) access points can only handle a small number of clients. I set the new AP to extend the current network so that the clients weren't constantly switching between different wireless networks, however as soon as this AP was configured all the wireless devices started seeing network trouble, flicking on and off. I'm assuming that this is because both APs are reasonably strong, and the client can't decide which to use. What is the best route to follow to resolve this? What I'm aiming for is wireless resiliency; preferably having two APs share the network load, or if this isn't an option then having a primary AP with a "fail-over", should the primary go down for any reason.

  Read the article

• How do ulimit -n and /proc/sys/fs/file-max differ?

  - by bantic

  I notice that on a new CentOS image that I just booted up off of EC2 that the ulimit default is 1024 open files, but /proc/sys/fs/file-max is set at 761,408 and I'm wondering how these two limits work together. I'm guessing that ulimit -n is a per-user limit of number of file descriptors while /proc/sys/fs/file-max is system-wide? If that's the case, say I've logged in twice as the same user -- does each logged-in user have a 1024 limit on number of open files, or is it a limit of 1024 combined open files between each of those logged-in users? And is there much performance impact to setting your max file descriptors to a very high number, if your system isn't ever opening very many files?

  Read the article

• SQL 2008 Memory Usage

  - by Danilo Brambilla

  I have a SQL Server 2008 (ver 10.0.1600) running on a Windows Server 2008 R2 Enterprise server with 8 GB of physical ram. If I open Task Manager I can see on 'Physical Memory' section of 'Performance' tab that only 340 MB are Available of 8191 Total, but I can't see any process using such amount of memory. Please note SQL Server is memory limited to 6GB (Maximum Server Memory = 6000). If I open Sysinternals Process Explorer, I can see sqlsrvr.exe process has: Private Bytes: 227.000 K Working Set: 140.000 K Virtual Size: 8.762.000 K What does this means? Is there any way to free up this memory for other process? Why Virtual Size figure as allocated memory? I thought that Virtual Size was 'reserved memory' only.

  Read the article

• new xp install, but it moves slow

  - by doug

  hi there I just installed new XP windows OS on a old laptop. I did also all the updates I was asked for. I installed also, the latest driver updates from the official laptop producer site. Now, when I try to use that laptop to talk on Yahoo! Messenger, the sound quality is very bad, and I barely hear what the other person is saying. Before I was reinstalling the XP the laptop were working fine. do you have any tips for me? What software utilities to try in order to improve it's performance? what software utilities to install in order to test it's performances?

  Read the article

• General High-Level Assessment

  - by tcarper

  Guys and Gals, I've been tasked with a doozy of an assignment. The objective is something akin to "laying of hands" on several database servers which work in concert to provide data to various Web, Client-Server and Tablet-Sync'd distributed Client-Server programs. More specifically, I've been asked to come up with a "Maintenance Plan" which includes recommendations for future work to improve these machines' performance/reliability/security/etc. Might there be some good articles on teh interwebs ya'll could point me towards which would give me some good basis to start? Articles describing "These are the top 4 overarching categories and this is how you should proceed when drilling down on each of them" sort-of-thing would be fabulous. The Databases are all SQL 2005, however the compatibility level is 80 and they were originally created with ERwin based on SQL 6.5. The OSs are all Windows Server 2003. Thanks all! Tim

  Read the article

• How do ISPs/Colocation Facilities limit bandwidth for Ethernet Drops?

  - by Kyle Brandt

  I have switch providers and have run into some problems with bandwidth limitations. I have more bandwidth then before, but there are performance issues. The router is connected to a 100mBit port, but they limit it to arbitrary settings (in software I imagine). It seems when I go above the limit, the provider starts to drop packets beyond the limit (This is what they said they do as well). Is it possible the previous provider did something like queuing packets above the this limit before dropping them? Is anyone aware of not only what can be done, but what is typical? Also, is there anything I can do on my Cisco router to help this situation? It would seem I am pretty helpless if the packets are dropped before they reach my interface (The traffic that is high is inbound to my network).

  Read the article

• Static Content Caching in Sticky Session ?

  - by Ravi

  can we do Static Content caching in Sticky Session Servers. We use SqlStateServer to store the Session of the user. right now we are doing performance tuning in our application, so we decided to cache the static Content(images, css, js) for the applicaiton. so that it loads faster. Is it Good to cache the static content in Sticky Session ? If it's good, then can any one give me some links where i can read about it. right now i done following settings in my web config file <staticContent> <clientCache cacheControlCustom="public" cacheControlMode="UseMaxAge" cacheControlMaxAge="500.00:00:00" /> </staticContent> can this is the good code ? will it not affect our sticky session environment ? my goal is to cache the static images, css, Js for the application

  Read the article

• Windows DFS Limitations

  - by Phil

  So far I have seen an article on performance and scalability mainly focusing on how long it takes to add new links. But is there any information about limitations regarding number of files, number of folders, total size, etc? Right now I have a single file server with millions of JPGs (approx 45 TB worth) that are shared on the network through several standard file shares. I plan to create a DFS namespace and replicate all these images to another server for high availability purposes. Will I encounter extra problems with DFS that I'm otherwise not experiencing with plain-jane file shares? Is there a more recommended way to replicate these millions of files and make them available on the network? EDIT: I would experiment on my own and write a blog post about it, but I don't have the hardware for the second server yet. I'd like to collect information before buying 45 TB of hard drive space...

  Read the article

• Can Windows 8 boot from FireWire?

  - by Holli

  I read many times Windows 7 is unable to boot from an external FireWire drive but I wonder if Windows 8 is able to do so. I need to run Windows on my Mac but only very few times so my idea was to move it all to an external drive. I have one of the first Intel Macs so running Windows in a virtual machine is not really fun. The performance is just too poor. Adding a Boot Camp partition to my internal drive is also not possible at the moment.

  Read the article

• How can I set deadline as the I/O scheduler for USB Flash devices by using udev rules?

  - by ????

  I have set CFQ as the default I/O scheduler. I often get bad performance when I write data into a Flash device. This is resolved if I use deadline as the I/O scheduler for USB Flash devices. I can't always change the scheduler manually, right? I think writing udev rules is a good idea. Can someone please write rules for me? I want: When I plug in a USB device, detect the type of the device. If it is a portable USB hard disk, do nothing (I think if a device has more than one partitions, it always a portable hard disk. If it is a USB Flash device, set deadline as it's scheduler.

  Read the article

< Previous Page | 348 349 350 351 352 353 354 355 356 357 358 359  | Next Page >