Search Results

Search found 9396 results on 376 pages for 'stored procedures'.

Page 353/376 | < Previous Page | 349 350 351 352 353 354 355 356 357 358 359 360  | Next Page >

• choosing an image locally from http url and serving that image without a server round trip

  - by serverman

  Hi folks I am a complete novice to Flash (never created anything in flash). I am quite familiar with web applications (J2EE based) and have a reasonable expertise in Javascript. Here is my requirement. I want the user to select (via an html form) an image. Normally in the post, this image would be sent to server and may be stored there to be served later. I do not want that. I want to store this image locally and then serve it via HTTP to the user. So, the flow is: 1. Go to the "select image url":mywebsite.com/selectImage Browse the image and select the image This would transfer control locally to some code running on the client (Javascript or flash), which would then store the image locally at some place on the client machine. Go to the "show image url": mywebsite.com/showImage This would eventually result in some client code running on the browser that retrieves the image and renders it (without any server round trips.) I considered the following options: Use HTML5 local storage. Since I am a complete novice to flash, I looked into this. I found that it is fairly straightforward to store and retrieve images in javascript (only strings are allowed but I am hoping storing base64 encoded strings would work at least for small images). However, how do I serve the image via http url that points to my server without a server round trip? I saw the interesting article at http://hacks.mozilla.org/category/fileapi/ but that would work only in firefox and I need to work on all latest browsers (at least the ones supporting HTML5 local storage) Use flash SharedObjects. OK, this would have been good - the only thing is I am not sure where to start. Snippets of actionscripts to do this are scattered everywhere but I do not know how to use those scripts in an actual html page:) I do not need to create any movies or anything - just need to store an image and serve it locally. If I go this route, I would also use it to store other "strings" locally. If you suggest this, please give me the exact steps (could be pointers to other web sites) on how to do this. I would like to avoid paying for any flash development environment software ideally:) Thank you!

  Read the article

• RequestFactoryEditorDriver getting edited data after flush

  - by Deanna

  Let me start with I have a solution, but I don't really think it is elegant. So, I am looking for a cleaner way to do this. I have an EntityProxy displayed in a view panel. The view panel is a RequestFactoryEditorDriver only using display mode. The user clicks on a data element and opens a popup editor to edit a data element of the EntityProxy with a few more bits of data than is displayed in the view panel. When the user saves the element I need the view panel to update the display. I ran into a problem because the RequestFactoryEditorDriver of the popup editor flow doesn't let you get to the edited data. The driver uses the passed in context and sends it to the server. The context returned out of flush only allows a Receiver even if you cast it to the type of context you stored in the editor driver in the edit() call. It doesn't appear to send and EntityProxyChanged event either, so I couldn't listen for that and update the display view. The solution I found was to change my domain object persist to return the newly saved entity. Then create the popup editor like this editor.getSaveButtonClickHandler().addClickHandler(createSaveHandler(driver, editor)); // initialize the Driver and edit the given text. driver.initialize(rf, editor); PlayerProfileCtx ctx = rf.playerProfile(); ctx.persist().using(playerProfile).with(driver.getPaths()) .to(new Receiver<PlayerProfileProxy>(){ @Override public void onSuccess(PlayerProfileProxy profile) { editor.hide(); playerProfile = profile; viewDriver.display(playerProfile); } }); driver.edit(playerProfile, ctx); editor.centerAndShow(); Then in the save handler I just fire the context I get from the flush. While this approach works, it doesn't seem right. It would seem I should subscribe to the entitychanged event in the display view and update the entity and the view from there. Also this approach saves the complete entity, not just the changed bits, which will increase bandwidth usage. What I would think should happen, is when you flush the entity it should 'optimistically' update the rf managed version of the entity and fire the entity proxy changed event. Only reverting the entity if something went wrong in the save. The actual save should only send the changed bits. In this way there isn't a need to refetch the whole entity and send that complete data over the wire twice. Is there a better solution?

  Read the article

• Copy image to BLOB from client pc aka Java function in Oracle

  - by mumich

  Hi guys, I've been stuck with this for past two days. I've go java function stored in Oracle system which is supposed to copy image from local drive do remote database and store it in BLOB - it's called CopyBLOB and looks like this: import java.sql.*; import oracle.sql.*; import java.io.*; public class CopyBLOB { static int id; static String fileName = null; static Connection conn = null; public CopyBLOB(int idz, String f) { id = idz; fileName = f; } public static void copy(int ident, String path) throws SQLException, FileNotFoundException { CopyBLOB cpB = new CopyBLOB(ident, path); cpB.getConnection(); cpB.callUpdate(id, fileName); } public void getConnection() throws SQLException { DriverManager.registerDriver (new oracle.jdbc.OracleDriver()); try { conn = DriverManager.getConnection("jdbc:oracle:thin:@oraserv.ms.mff.cuni.cz:1521:db", "xxx", "xxx"); } catch (SQLException sqlex) { System.out.println("SQLException while getting db connection: "+sqlex); if (conn != null) conn.close(); } catch (Exception ex) { System.out.println("Exception while getting db connection: "+ex); if (conn != null) conn.close(); } } public void callUpdate(int id, String file ) throws SQLException, FileNotFoundException { CallableStatement cs = null; try { conn.setAutoCommit(false); File f = new File(file); FileInputStream fin = new FileInputStream(f); cs = (CallableStatement) conn.prepareCall( "begin add_image(?,?); end;" ); cs.setInt(1, id ); cs.setBinaryStream(2, fin, (int) f.length()); cs.execute(); conn.setAutoCommit(true); } catch ( SQLException sqlex ) { System.out.println("SQLException in callUpdateUsingStream method of given status : " + sqlex.getMessage() ); } catch ( FileNotFoundException fnex ) { System.out.println("FileNotFoundException in callUpdateUsingStream method of given status : " + fnex.getMessage() ); } finally { try { if (cs != null) cs.close(); if (conn != null) conn.close(); } catch ( Exception ex ) { System.out.println("Some exception in callUpdateUsingStream method of given status : " + ex.getMessage( ) ); } } } } The wrapper function is defined in package "MyPackage" as folows: procedure image_adder( id varchar2, path varchar2 ) AS language java name 'CopyBLOB.copy(java.lang.String, java.lang.String)'; And the inserting function called image_add is as simple as this: procedure add_image( id numeric(10), pic blob) AS BEGIN insert into pictures values (seq_pic.nextval, id, pic); END add_image; Now the problem: When I type call MyPackage.image_adder(1, 'd:\samples\img.jpg'); I get the ORA-29531 Error: No method copy in class CopyBLOB. Can you help me, please?

  Read the article

• Planning to create PDF files in Ruby on Rails

  - by deau

  Hi there, A Ruby on Rails app will have access to a number of images and fonts. The images are components of a visual layout which will be stored separately as a set of rules. The rules specify document dimensions along with which images are used and where. The app needs to take these rules, fetch the images, and generate a PDF that is ready for local printing or emailing. The fonts will also be important. The user needs to customize the layout by inputting text which will be included in the PDF. The PDF must therefore also contain the desired font so that the document renders identically across different machines. Each PDF may have many pages. Each page may have different dimensions but this is not essential. Either way, the ability to manipulate the dimensions and margins given by the PDF is essential. The only thing that needs to be regularly changed is the text. If this is takes too much development then the app can store the layouts in 3rd party PDFs and edit the textual content directly. Eventually though, this will prove too restrictive on the apps intended functionality so I would prefer the app to generate the PDF's itself. I have never worked with PDFs before and, for the most part, I've never had to output anything to the user outside their monitor. A printed medium could require a very different approach to get the best results. If anyone has any advice on how to model the PDF format this it would be really appreciated. The technical aspects of printing such as bleed, resolution and colour have already been factored in to the layouts and images. I am aware that PDF is a proprietary file format and I want to use free or open source software. I have seen a number of Ruby libraries for generating PDF files but because I am new on this scene I have no way to reliably compare them and too little time to implement and test them all. I also have the option of using C to handle this feature and if this is process intensive then that might be preferred. What should I be thinking about and how should I be planning to implement this?

  Read the article

• PHP getting Twitter API JSON file contents without OAuth (Almost have it)

  - by DexCurl

  Hey guys, I have this script working fine with OAuth, but I accidentally nuked my 350 API hits with a stupid while statement :( I'm trying to get data from the Twitter API without OAuth, I can't figure it out (still pretty new), heres what I have <html> <body> <center> <hr /> <br /> <table border="1"> <tr><td>ScreenName</td><td>Followed back?</td></tr> <?php //twitter oauth deets $consumerKey = 'x'; $consumerSecret = 'x'; $oAuthToken = 'x'; $oAuthSecret = 'x'; // Create Twitter API objsect require_once("twitteroauth.php"); $oauth = new TwitterOAuth($consumerKey, $consumerSecret, $oAuthToken, $oAuthSecret); //get home timeline tweets and it is stored as an array $youfollow = $oauth->get('http://api.twitter.com/1/friends/ids.json?screen_name=lccountdown'); $i = 0; //start loop to print our results cutely in a table while ($i <= 20){ $youfollowid = $youfollow[$i]; $resolve = "http://api.twitter.com/1/friendships/exists.json?user_a=".$youfollow[$i]."&user_b=jwhelton"; $followbacktest = $oauth->get($resolve); //$homedate= $hometimeline[$i]->created_at; //$homescreenname = $hometimeline[$i]->user->screen_name; echo "<tr><td>".$youfollowid."</td><td>".$followbacktest."</td></tr>"; $i++; } ?> </table> </center> </body> </html> Neither of the two Twitter functions require authentication, so how can I get the same results? Thanks guys, Dex

  Read the article

• PHP Based session variable not retaining value. Works on localhost, but not on server.

  - by Foo

  I've been trying to debug this problem for many hours, but to no avail. I've been using PHP for many years, and got back into it after long hiatus, so I'm still a bit rusty. Anyways, my $_SESSION vars are not retaining their value for some reason that I can't figure out. The site worked on localhost perfectly, but uploading it to the server seemed to break it. First thing I checked was the PHP.ini server settings. Everything seems fine. In fact, my login system is session based and it works perfectly. So now that I know $_SESSIONS are working properly and retaining their value for my login, I'm presuming the server is setup and the problem is in my script. Here's a stripped version of the code that's causing a problem. $type, $order and $style are not being retained after they are set via a GET variable. The user clicks a link, which sets a variable via GET, and this variable is retained for the remainder of their session. Is there some problem with my logic that I'm not seeing? <?php require_once('includes/top.php'); //first line includes a call to session_start(); require_once('includes/db.php'); $type = filter_input(INPUT_GET, 't', FILTER_VALIDATE_INT); $order = filter_input(INPUT_GET, 'o', FILTER_VALIDATE_INT); $style = filter_input(INPUT_GET, 's', FILTER_VALIDATE_INT); /* According to documentation, filter_input returns a NULL when variables are undefined. So, if t, o, or s are not set via URL, $type, $order and $style will be NULL. */ print_r($_SESSION); /* All other sessions, such as the login session, etc. are displayed here. After the sessions are set below, they are displayed up here to... simply with no value. This leads me to believe the problem is with the code below, perhaps? */ // If $type is not null (meaning it WAS set via the get method above) // or it's false because the validation failed for some reason, // then set the session to the $type. I removed the false check for simplicity. // This code is being successfully executed, and the data is being stored... if(!is_null($type)) { $_SESSION['type'] = $type; } if(!is_null($order)) { $_SESSION['order'] = $order; } if(!is_null($style)) { $_SESSION['style'] = $style; } $smarty->display($template); ?> If anyone can point me in the right direction, I'd greatly appreciate it. Thanks.

  Read the article

• How to get all captures of subgroup matches with preg_match_all()?

  - by hakre

  Update/Note: I think what I'm probably looking for is to get the captures of a group in PHP. Referenced: PCRE regular expressions using named pattern subroutines. (Read carefully:) I have a string that contains a variable number of segments (simplified): $subject = 'AA BB DD '; // could be 'AA BB DD CC EE ' as well I would like now to match the segments and return them via the matches array: $pattern = '/^(([a-z]+) )+$/i'; $result = preg_match_all($pattern, $subject, $matches); This will only return the last match for the capture group 2: DD. Is there a way that I can retrieve all subpattern captures (AA, BB, DD) with one regex execution? Isn't preg_match_all suitable for this? This question is a generalization. Both the $subject and $pattern are simplified. Naturally with such the general list of AA, BB, .. is much more easy to extract with other functions (e.g. explode) or with a variation of the $pattern. But I'm specifically asking how to return all of the subgroup matches with the preg_...-family of functions. For a real life case imagine you have multiple (nested) level of a variant amount of subpattern matches. Example This is an example in pseudo code to describe a bit of the background. Imagine the following: Regular definitions of tokens: CHARS := [a-z]+ PUNCT := [.,!?] WS := [ ] $subject get's tokenized based on these. The tokenization is stored inside an array of tokens (type, offset, ...). That array is then transformed into a string, containing one character per token: CHARS -> "c" PUNCT -> "p" WS -> "s" So that it's now possible to run regular expressions based on tokens (and not character classes etc.) on the token stream string index. E.g. regex: (cs)?cp to express one or more group of chars followed by a punctuation. As I now can express self-defined tokens as regex, the next step was to build the grammar. This is only an example, this is sort of ABNF style: words = word | (word space)+ word word = CHARS+ space = WS punctuation = PUNCT If I now compile the grammar for words into a (token) regex I would like to have naturally all subgroup matches of each word. words = (CHARS+) | ( (CHARS+) WS )+ (CHARS+) # words resolved to tokens words = (c+)|((c+)s)+c+ # words resolved to regex I could code until this point. Then I ran into the problem that the sub-group matches did only contain their last match. So I have the option to either create an automata for the grammar on my own (which I would like to prevent to keep the grammar expressions generic) or to somewhat make preg_match working for me somehow so I can spare that. That's basically all. Probably now it's understandable why I simplified the question. Related: pcrepattern man page Get repeated matches with preg_match_all()

  Read the article

• sys.path() and PYTHONPATH issues

  - by Justin

  I've been learning Python, I'm working in 2.7.3, and I'm trying to understand import statements. The documentation says that when you attempt to import a module, the interpreter will first search for one of the built-in modules. What is meant by a built-in module? Then, the documentation says that the interpreter searches in the directories listed by sys.path, and that sys.path is initialized from these sources: the directory containing the input script (or the current directory). PYTHONPATH (a list of directory names, with the same syntax as the shell variable PATH). the installation-dependent default. Here is a sample output of a sys.path command from my computer using python in command-line mode: (I deleted a few so that it wouldn't be huge) ['', '/usr/lib/python2.7', '/usr/lib/python2.7/lib-old', '/usr/lib/python2.7/lib-dynload', '/usr/local/lib/python2.7/dist-packages', '/usr/lib/python2.7/dist-packages', '/usr/lib/python2.7/dist-packages/PIL', '/usr/lib/python2.7/dist-packages/gst-0.10', '/usr/lib/python2.7/dist-packages/gtk-2.0', '/usr/lib/pymodules/python2.7', '/usr/lib/python2.7/dist-packages/ubuntuone-couch', '/usr/lib/python2.7/dist-packages/ubuntuone-storage-protocol'] Now, I'm assuming that the '' path refers to the directory containing the 'script', and so I figured the rest of them would be coming from my PYTHONPATH environmental variable. However, when I go to the terminal and type env, PYTHONPATH doesn't exist as an environmental variable. I also tried import os then os.environ, but I get the same output. Do I really not have a PYTHONPATH environmental variable? I don't believe I ever specifically defined a PYTHONPATH environmental variable, but I assumed that when I installed new packages they automatically altered that environment variable. If I don't have a PYTHONPATH, how is my sys.path getting populated? If I download new packages, how does Python know where to look for them if I don't have this PYTHONPATH variable? How do environment variables work? From what I understand, environment variables are specific to the process for which they are set, however, if I open multiple terminal windows and run env, they all display a number of identical variables, for example, PATH. I know there file locations for persistent environment variables, for example /etc/environment, which contains my PATH variable. Is it possible to tell where a persistent environment variable is stored? What is the recommended location for storing new persistent environment variables? How do environment variables actually work with say, the Python interpreter? The Python interpreter looks for PYTHONPATH, but how does it work at the nitty-gritty level?

  Read the article

• Java - StackOverflow Error on recursive 2D boolean array method that shouldn't happen.

  - by David W.

  Hey everyone, I'm working on a runnable java applet that has a fill feature much like the fill method in drawing programs such as Microsoft Paint. This is how my filling method works: 1.) The applet gets the color that the user clicked on using .getRGB 2.) The applet creates a 2D boolean array of all the pixels in the window, with the value "true" if that pixel is the same color as the color clicked on or "false" if not. The point of this step is to keep the .getRGB method out of the recursive method to hopefully prevent this error. 3.) The applet recursively searches the 2D array of booleans where the user clicked, recording each adjacent point that is "true" in an ArrayList. The method then changes each point it records to false and continues. 4.) The applet paints every point stored in the ArrayList to a user selected color. All of the above steps work PERFECTLY if the user clicks within a small area, where only a few thousand pixels or so have their color changed. If the user selects a large area however (such as about 360,000 / the size of the applet window), the applet gets to the recursive stage and then outputs this error: Exception in thread "AWT-EventQueue-1" java.lang.StackOverflowError at java.util.ArrayList.add(ArrayList.java:351) at paint.recursiveSearch(paint.java:185) at paint.recursiveSearch(paint.java:190) at paint.recursiveSearch(paint.java:190) at paint.recursiveSearch(paint.java:190) at paint.recursiveSearch(paint.java:190) at paint.recursiveSearch(paint.java:190) at paint.recursiveSearch(paint.java:190) (continues for a few pages) Here is my recursive code: public void recursiveSearch(boolean [][] list, Point p){ if(isValid(p)){ if(list[(int)p.y][(int)p.x]){ fillPoints.add(p); list[(int)p.y][(int)p.x] = false; recursiveSearch(list, new Point(p.x-1,p.y));//Checks to the left recursiveSearch(list, new Point(p.x,p.y-1));//Checks above recursiveSearch(list, new Point(p.x+1,p.y));//Checks to the right recursiveSearch(list, new Point(p.x,p.y+1));//Checks below } } } Is there any way I can work around an error like this? I know that the loop will never go on forever, it just could take a lot of time. Thanks in advance.

  Read the article

• Persistence scheme & state data for low memory situations (iphone)

  - by Robin Jamieson

  What happens to state information held by a class's variable after coming back from a low memory situation? I know that views will get unloaded and then reloaded later but what about some ancillary classes & data held in them that's used by the controller that launched the view? Sample scenario in question: @interface MyCustomController: UIViewController { ServiceAuthenticator *authenticator; } -(id)initWithAuthenticator:(ServiceAuthenticator *)auth; // the user may press a button that will cause the authenticator // to post some data to the service. -(IBAction)doStuffButtonPressed:(id)sender; @end @interface ServiceAuthenticator { BOOL hasValidCredentials; // YES if user's credentials have been validated NSString *username; NSString *password; // password is not stored in plain text } -(id)initWithUserCredentials:(NSString *)username password:(NSString *)aPassword; -(void)postData:(NSString *)data; @end The app delegate creates the ServiceAuthenticator class with some user data (read from plist file) and the class logs the user with the remote service. inside MyAppDelegate's applicationDidFinishLaunching: - (void)applicationDidFinishLaunching:(UIApplication *)application { ServiceAuthenticator *auth = [[ServiceAuthenticator alloc] initWithUserCredentials:username password:userPassword]; MyCustomController *controller = [[MyCustomController alloc] initWithNibName:...]; controller.authenticator = auth; // Configure and show the window [window addSubview:..]; // make everything visible [window makeKeyAndVisible]; } Then whenever the user presses a certain button, 'MyCustomController's doStuffButtonPressed' is invoked. -(IBAction)doStuffButtonPressed:(id)sender { [authenticator postData:someDataFromSender]; } The authenticator in-turn checks to if the user is logged in (BOOL variable indicates login state) and if so, exchanges data with the remote service. The ServiceAuthenticator is the kind of class that validates the user's credentials only once and all subsequent calls to the object will be to postData. Once a low memory scenario occurs and the associated nib & MyCustomController will get unloaded -- when it's reloaded, what's the process for resetting up the 'ServiceAuthenticator' class & its former state? I'm periodically persisting all of the data in my actual model classes. Should I consider also persisting the state data in these utility style classes? Is that the pattern to follow?

  Read the article

• vertical align img

  - by JK36

  I have a div called "images" which has a width of 277px. Within that div I have 9 images in it, just stored as tags. I've got the images to float left and line up quite nicely within my div, but I would like the images to align vertically, as some are portrait and others are landscape. I know I can do this if I enclose each image in a div, but the plugin I use to launch the gallery won't recognise which image is being fired, so i need to enclose them as just within the tags. This is the code I have, if someone can help me just align the images horizontally and vertically. I don't want the images to be skewed. #images_box a { float:left; padding:9px; width: 70px; height: 70px; text-align: center; vertical-align: middle; display: table-cell; } my data <div id="images"> <a class="fancybox" rel="gallery1" href="http://farm8.staticflickr.com/7069/7060779347_fbee5aae15_b.jpg" title="morning after[explored] (mariosworld343)"> <img src="http://farm8.staticflickr.com/7069/7060779347_fbee5aae15_m.jpg" alt="" /> </a> <a class="fancybox" rel="gallery1" href="http://farm8.staticflickr.com/7234/7047458501_46a2203733_b.jpg" title="Self confined... (TVidhya)"> <img src="http://farm8.staticflickr.com/7234/7047458501_46a2203733_m.jpg" alt="" /> </a> <a class="fancybox" rel="gallery1" href="http://farm8.staticflickr.com/7053/6918451990_20fa76f338_b.jpg" title="kleiner schrittmacher (KatjaGiersig)"> <img src="http://farm8.staticflickr.com/7053/6918451990_20fa76f338_m.jpg" alt="" /> </a> <a class="fancybox" rel="gallery1" href="http://farm8.staticflickr.com/7121/7059981833_abe404f4a0_b.jpg" title="(caro diario.)"> <img src="http://farm8.staticflickr.com/7121/7059981833_abe404f4a0_m.jpg" alt="" /> </a> </div>

  Read the article

• Can I use the [] operator in C++ to create virtual arrays

  - by Shane MacLaughlin

  I have a large code base, originally C ported to C++ many years ago, that is operating on a number of large arrays of spatial data. These arrays contain structs representing point and triangle entities that represent surface models. I need to refactor the code such that the specific way these entities are stored internally varies for specific scenarios. For example if the points lie on a regular flat grid, I don't need to store the X and Y coordinates, as they can be calculated on the fly, as can the triangles. Similarly, I want to take advantage of out of core tools such as STXXL for storage. The simplest way of doing this is replacing array access with put and get type functions, e.g. point[i].x = XV; becomes Point p = GetPoint(i); p.x = XV; PutPoint(i,p); As you can imagine, this is a very tedious refactor on a large code base, prone to all sorts of errors en route. What I'd like to do is write a class that mimics the array by overloading the [] operator. As the arrays already live on the heap, and move around with reallocs, the code already assumes that references into the array such as point *p = point + i; may not be used. Is this class feasible to write? For example writing the methods below in terms of the [] operator; void MyClass::PutPoint(int Index, Point p) { if (m_StorageStrategy == RegularGrid) { int xoffs,yoffs; ComputeGridFromIndex(Index,xoffs,yoffs); StoreGridPoint(xoffs,yoffs,p.z); } else m_PointArray[Index] = p; } } Point MyClass::GetPoint(int Index) { if (m_StorageStrategy == RegularGrid) { int xoffs,yoffs; ComputeGridFromIndex(Index,xoffs,yoffs); return GetGridPoint(xoffs,yoffs); // GetGridPoint returns Point } else return m_PointArray[Index]; } } My concern is that all the array classes I've seen tend to pass by reference, whereas I think I'll have to pass structs by value. I think it should work put other than performance, can anyone see any major pitfalls with this approach. n.b. the reason I have to pass by value is to get point[a].z = point[b].z + point[c].z to work correctly where the underlying storage type varies.

  Read the article

• php parse error always on the last line

  - by is0lated

  I'm trying to read a comment that is stored in a mysql table. For some reason I always get a parse error on the last line of the file even if the last line is blank. I'm not sure if it's relevant but the connect.php works for putting the comment into the database. I'm using wampserver to host it and coding it by hand. I think that's it's something to do with the while loop, when I comment out the while(){ and the } near the end I just get a few missing variable errors as you would expect. I'm quite new to php coding so I'm pretty sure the problem will be something simple that I've either missed or not understood properly. Anyway, here's my code: <?php include "connect.php"; ?> <?php $sql = "SELECT * FROM main"; $result = mysql_query($sql) or die("Could not get posts from table"); while($rows=mysql_fetch_array($result)){ ?> <table bgcolor="green" align="center"> <tr> <td></td> </tr> <tr> <td><strong> <? echo $rows['name']; ?> </strong></td> </tr> <tr> <td> <? echo $rows['email']; ?> </td> </tr> <tr> <td> <? echo $rows['comment']; ?> </td> </tr> </table> <? } ?> Thanks for the help. :)

  Read the article

• JPA - Can I create an Entity class, using an @DiscriminatorValue, that doesn't have its own table?

  - by DaveyDaveDave

  Hi - this is potentially a bit complex, so I'll do my best to describe my situation - it's also my first post here, so please forgive formatting mistakes, etc! I'm using JPA with joined inheritance and a database structure that looks like: ACTION --------- ACTION_ID ACTION_MAPPING_ID ACTION_TYPE DELIVERY_CHANNEL_ACTION -------------------------- ACTION_ID CHANNEL_ID OVERRIDE_ADDRESS_ACTION -------------------------- ACTION_ID (various fields specific to this action type) So, in plain English, I have multiple different types of action, all share an ACTION_MAPPING, which is referenced from the 'parent' ACTION table. DELIVERY_CHANNEL_ACTION and OVERRIDE_ADDRESS_ACTION both have extra, supplementary data of their own, and are mapped to ACTION with a FK. Real-world, I also have a 'suppress' action, but this doesn't have any supplementary data of its own, so it doesn't have a corresponding table - all it needs is an ACTION_MAPPING, which is stored in the ACTION table. Hopefully you're with me so far... I'm creating a new project from scratch, so am pretty flexible in what I can do, but obviously would like to get it right from the outset! My current implementation, which works, has three entities loosely defined as follows: @Entity @Table(name="ACTION") @Inheritance(strategy=InheritanceType.JOINED) @DiscriminatorValue("SUPPRESS") public class Action @Entity @Table(name="DELIVERY_CHANNEL_ACTION") @DiscriminatorValue("DELIVERY_CHANNEL") public class DeliveryChannelAction extends Action @Entity @Table(name="OVERRIDE_ADDRESS_ACTION") @DiscriminatorValue("OVERRIDE_ADDRESS") public class OverrideAddressAction extends Action That is - I have a concrete base class, Action, with a Joined inheritance strategy. DeliveryChannelAction and OverrideAddressAction both extend Action. What feels wrong here though, is that my Action class is the base class for these two actions, but also forms the concrete implementation for the suppress action. For the time being this works, but at some point more actions are likely to be added, and there's every chance that some of them will, like SUPPRESS, have no supplementary data, which will start to get difficult! So... what I would like to do, in the object model world, is to have Action be abstract, and create a SuppressAction class, which is empty apart from having a @DiscriminatorValue("SUPPRESS"). I've tried doing exactly what is described above, so, changing Action to: @Entity @Table(name="ACTION") @Inheritance(strategy=InheritanceType.JOINED) public abstract class Action and creating: @DiscriminatorValue("SUPPRESS") public class SuppressAction extends Action but no luck - it seems to work fine for DeliveryChannelAction and OverrideAddressAction, but when I try to create a SuppressAction and persist it, I get: java.lang.IllegalArgumentException: Object: com.mypackage.SuppressAction[actionId=null] is not a known entity type. at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.registerNewObjectForPersist(UnitOfWorkImpl.java:4147) at org.eclipse.persistence.internal.jpa.EntityManagerImpl.persist(EntityManagerImpl.java:368) at com.mypackage.test.util.EntityTestUtil.createSuppressAction(EntityTestUtil.java:672) at com.mypackage.entities.ActionTest.testCRUDAction(ActionTest.java:27) which I assume is down to the fact that SuppressAction isn't registered as an entity, but I don't know how I can do that, given that it doesn't have an associated table. Any pointers, either complete answers or hints for things to Google (I'm out of ideas!), most welcome :) EDIT: to correct my stacktrace.

  Read the article

• Authenticating users in iPhone app

  - by Myron

  I'm developing an HTTP api for our web application. Initially, the primary consumer of the API will be an iPhone app we're developing, but I'm designing this with future uses in mind (such as mobile apps for other platforms). I'm trying to decide on the best way to authenticate users so they can access their accounts from the iPhone. I've got a design that I think works well, but I'm no security expert, so I figured it would be good to ask for feedback here. The design of the user authentication has 3 primary goals: Good user experience: We want to allow users to enter their credentials once, and remain logged in indefinitely, until they explicitly log out. I would have considered OAuth if not for the fact that the experience from an iPhone app is pretty awful, from what I've heard (i.e. it launches the login form in Safari, then tells the user to return to the app when authentication succeeds). No need to store the user creds with the app: I always hate the idea of having the user's password stored in either plain text or symmetrically encrypted anywhere, so I don't want the app to have to store the password to pass it to the API for future API requests. Security: We definitely don't need the intense security of a banking app, but I'd obviously like this to be secure. Overall, the API is REST-inspired (i.e. treating URLs as resources, and using the HTTP methods and status codes semantically). Each request to the API must include two custom HTTP headers: an API Key (unique to each client app) and a unique device ID. The API requires all requests to be made using HTTPS, so that the headers and body are encrypted. My plan is to have an api_sessions table in my database. It has a unique constraint on the API key and unique device ID (so that a device may only be logged into a single user account through a given app) as well as a foreign key to the users table. The API will have a login endpoint, which receives the username/password and, if they match an account, logs the user in, creating an api_sessions record for the given API key and device id. Future API requests will look up the api_session using the API key and device id, and, if a record is found, treat the request as being logged in under the user account referenced by the api_session record. There will also be a logout API endpoint, which deletes the record from the api_sessions table. Does anyone see any obvious security holes in this?

  Read the article

• Not Inserted into database in PHP script

  - by Aruna

  Hi, i am having an form for uploading an excel file like <form enctype="multipart/form-data" action="http://localhost/joomla/Joomla_1.5.7/index.php?option=com_jumi&fileid=7" method="POST"> Please choose a file: <input name="file" type="file" id="file" /><br /> <input type="submit" value="Upload" /> </form> And in the FIle http://localhost/joomla/Joomla_1.5.7/index.php?option=com_jumi&fileid=7 i have retrived the uploaded file contents by <?php echo "Name". $_FILES['file']['name'] . "<br />"; echo "Type: " . $_FILES["file"]["type"] . "<br />"; echo "Size: " . ($_FILES["file"]["size"] / 1024) . " Kb<br />"; echo "Stored in: " . $_FILES["file"]["tmp_name"] . "<br />"; $string = file_get_contents( $_FILES["file"]["tmp_name"] ); foreach ( explode( "\n", $string ) as $userString ) { $userString = trim( $userString ); echo $userString; $array = explode( ';', $userString ); $userdata = array ( 'cf_id'=>trim( $array[0] ), 'text_0'=>trim( $array[1] ), 'text_1'=>trim( $array[2] ), 'text_2'=>trim( $array[3] ), 'text_3'=>trim($array[4]), 'text_6'=>trim($array[5]), 'text_7'=>trim($array[6]), 'text_9'=>trim($array[7]), 'text_12'=>trim($array[8])); global $db; $db =& JFactory::getDBO(); $query = 'INSERT INTO #__chronoforms_UploadAuthor VALUES ("'.$userdata['cf_id'].'","'.$userdata['text_0'].'","'.$userdata['text_1'].'","'.$userdata['text_2'].'","'.$userdata['text_3'].'","'.$userdata['text_6'].'","'.$userdata['text_7'].'","'.$userdata['text_9'].'")'; $db->Execute($query); echo "<br>"; } i am trying to insert the contents into the table #__chronoforms_UploadAuthor in Joomla database . it doent shows any error but it is not inserted into the database.. Please help me.. Y the contents are not inserted into the database...And how to make it inserted into the database..

  Read the article

• How can I obtain the IPv4 address of the client?

  - by Dr Dork

  Hello! I'm prepping for a simple work project and am trying to familiarize myself with the basics of socket programming in a Unix dev environment. At this point, I have some basic server side code setup to listen for incoming TCP connection requests from clients after the parent socket has been created and is set to listen... int sockfd, newfd; unsigned int len; socklen_t sin_size; char msg[]="Test message sent"; char buf[MAXLEN]; int st, rv; struct addrinfo hints, *serverinfo, *p; struct sockaddr_storage client; char ip[INET6_ADDRSTRLEN]; . . //parent socket creation and listen code omitted for simplicity . //wait for connection requests from clients while(1) { //Returns the socketID and address of client connecting to socket if( ( newfd = accept(sockfd, (struct sockaddr *)&client, &len) ) == -1 ){ perror("Accept"); exit(-1); } if( (rv = recv(newfd, buf, MAXLEN-1, 0 )) == -1) { perror("Recv"); exit(-1); } struct sockaddr_in *clientAddr = ( struct sockaddr_in *) get_in_addr((struct sockaddr *)&client); inet_ntop(client.ss_family, clientAddr, ip, sizeof ip); printf("Receive from %s: query type is %s\n", ip, buf); if( ( st = send(newfd, msg, strlen(msg), 0)) == -1 ) { perror("Send"); exit(-1); } //ntohs is used to avoid big-endian and little endian compatibility issues printf("Send %d byte to port %d\n", ntohs(clientAddr->sin_port) ); close(newfd); } } I found the get_in_addr function online and placed it at the top of my code and use it to obtain the IP address of the client connecting... // get sockaddr, IPv4 or IPv6: void *get_in_addr(struct sockaddr *sa) { if (sa->sa_family == AF_INET) { return &(((struct sockaddr_in*)sa)->sin_addr); } return &(((struct sockaddr_in6*)sa)->sin6_addr); } but the function always returns the IPv6 IP address since thats what the sa_family property is set as. My question is, is the IPv4 IP address stored anywhere in the data I'm using and, if so, how can I access it? Thanks so much in advance for all your help!

  Read the article

• I am unsure of how to access a persistence entity from a JSP page?

  - by pharma_joe

  Hi, I am just learning Java EE, I have created a Persistence entity for a User object, which is stored in the database. I am now trying to create a JSP page that will allow a client to enter a new User object into the System. I am unsure of how the JSP page interacts with the User facade, the tutorials are confusing me a little. This is the code for the facade: <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> <title>Add User to System</title> </head> <body> <h2>Add User</h2> <h3>Please fill out the details to add a user to the system</h3> <form action=""> <label>Email:</label> <input type="text" name="email"><br /> <label>Password:</label> <input type="password" name="name"><br /> <label>Name:</label> <input type="text" name="name"><br /> <label>Address:</label> <input type="text" name="address"><br /> <label>Type:</label> <select name="type"> <option>Administrator</option> <option>Member</option> </select><br /> <input type="submit" value="Add" name="add"/> <input type="reset" value="clear" /> </form> </body> This is the code I have to add a new User object within the User facade class: @Stateless public class CinemaUserFacade { @PersistenceContext(unitName = "MonashCinema-warPU") private EntityManager em; public void create(CinemaUser cinemaUser) { em.persist(cinemaUser); } I am finding it a little difficult to get my head around the whole MVC thing, getting there but would appreciate it if someone could turn the light on for me!

  Read the article

• PHP Shared Sessions across Domain

  - by bigstylee

  Hi, I have seen a few answers to this on SOO but most of these are concerned with the use of subdomains, of which none have worked for me. The common one being that the use of session.cookie_domain, which from my understanding will only work with subdomains. I am interested in a solution that deals with deals with entirely different domains (and includes the possibility of subdomains). Unfortunately project deadlines being what they are, time is not on my side, so I turn to SOO's expertise and experience. The current project brief is to be able to log into one site which currently only stores the user_id in the session and then be able to retrieve this value while on a different domain within the same server enviroment. Session data is being stored/retrieved from a database where the session id is the primary key. I am hoping to find a "light wieght" and "easy" to implement solution. The system is utlising an in-house Model View Controller design pattern, so all requests (including different domains) are run through a single bootstrap script. Using the domain name as a variable, this determines what context to display to the user. One option that did look like to have potential is the use of a hidden image and using the alt tag to set the user id. My first impressions suggest this immediately seems "too easy" (if possible) and riddled with security flaws. Disscuss? Another option which I considered is using the IP and User Agent for authentication but again I feel this not going to be a reliable option due to shared networks and changing IP addresses. My third option (and preferred) which I considered and as yet not seen discussed is using htaccess to fool the user into thinking that they are on a different domain when infact apache is redirecting; something like www.foo.com/index.php?domain=bar.com&controller=news/categoires/1 but displays to the user as www.bar.com/news/categories/1 foo.com represents the "main site domain" which all requests are run through and bar.com is what the user thinks they are accessing. The controller request dictates the page and view being requested. Is this possible? Are there other options? Pros/Cons? Thanks in advanced!!!

  Read the article

• Database advantages? Access, MySQL, msSQL, or any others?

  - by JimZ

  Dear all Stackoverflowers, I just started to learn programming and now I'm putting this question online based on a quote: no question is silly My work needs to develop a order system based on web, which wants a database system. Since using Excel for years as a general office user, I naturally turn this to Access. However, most people say Access is very limited comparing to MySQL or MSSQL, or any other more professional database system. But after developing some functions for my company's order system, I really find Access can fulfill my request. And I also tried MSSQL to develop, which I found it not quite convenient to use. I have searched in stackoverflow and find no general answer about my doubt. Now I am sincerely hoping some experienced and professional developers could clear my doubts. Now I'm listing some Access advantages, which I don't think other database system have. I hope you could help me also find these advantages in others. 1. Access is portable, I can just copy a xxx.accdb file to my company and continue with development. 2. Access is easy to generate helpful table, for example, it will automatically generate a field that can automatically count, could be used as primary key value. 3. it is more compatable with Excel, to display and filter data. 4. importantly, it nerely needs no environment to setup, just needs MS Office to be installed. ............others However, I also find some points that MSSQL is advantaged: 1. security reasons 2. easy to backup, ( just use BACKUP..... sql statement to do it) 3. can edit stored procedure to save some functions to database ...............others specifically, I wish some friends could tell me how to make other database portable? since I usually work both at home and in office. It's a headache to move MSSQL work to my office, since the version of MSSQL is not the same. Thank you all and best regards, :)

  Read the article

• PHP Session / Array Problem accesing

  - by Chris

  Hello, I have a form that certain data, which then gets calculated and gets displayed in a table. All the data gets saved in a 2 dimensional array. Every time i go back to the form the new data gets saved in the array. That data will be displayed in the next table row and so on. I have used print_r($_Session) and everything gets properly saved in the array. Although i have no idea how to acces the session variables area, floor, phone, network etc wich are now in the array. Without arrays i stored them in a variable for example $phone , and did calculations with it. But now when i use the arrays, i keep on getting undefined index phone etc... How can i acces these variables, been looking at this for hours without getting any closer to a solution. Any help much appreciated. Regards. First page: if (empty ($ _POST)) ( Mode = $ name $ _POST ['state name']; $ Area = $ _POST ['size']; $ Floor = isset ($ _POST ['floor'])? $ _POST ['Floor'] 0, / / if checkbox checked value 1 else 0 $ Phone = isset ($ _POST ['phone'])? $ _POST ['Phone']: 0; $ Network = isset ($ _POST ['network'])? $ _POST ['Network']: 0; / / Control surface if (is_numeric ($ area)) / / OK ( if (isset ($ _SESSION ['table'])) ( / / Create a new row to the existing session table $ Table = $ _SESSION ['table']; $ Number = count ($ table); $ Table [$ count] [0] = $ file name; $ Table [$ count] [1] = $ size; $ Table [$ count] [2] = $ floor; $ Table [$ count] [3] = $ phone; $ Table [$ count] [4] = $ network; $ _SESSION ['Table'] = $ table; ) else ( / / Create the session table $ Table [0] [0] = $ file name; $ Table [0] [1] = $ size; $ Table [0] [2] = $ floor; $ Table [0] [3] = $ phone; $ Table [0], [4] $ = network; $ _SESSION ['Table'] = $ table; ) header ("Location: ExpoOverzicht.php"); ) else ( echo "<h1> surface Wrong - New try </ h1>"; ) ) When i made the php code withotu the arrays i declared like this, and it worked fine. But now there in the array, and i have no idea how to "acces them" $standnaam = $_SESSION["standnaam"]; $oppervlakte = $_SESSION["oppervlakte"]; $verdieping = $_SESSION["verdieping"]; $telefoon = $_SESSION["telefoon"]; $netwerk = $_SESSION["netwerk"];

  Read the article

• C# Read Byte [] to Image

  - by LucasGuitar

  I have an application which I'm adding pictures and these are automatically converted to binary and stored in a single file. how can I save several images, I keep in an XML file start and size of each set of refente to an image byte. But it has several images in bytes, whenever I try to select a different set of bytes just opening the same image. I would like your help to be able to fix this and open different images. Code //Add Image private void btAddImage_Click(object sender, RoutedEventArgs e) { OpenFileDialog op = new OpenFileDialog(); op.Title = "Selecione a Imagem"; op.Filter = "All supported graphics|*.jpg;*.jpeg;*.png|" + "JPEG (*.jpg;*.jpeg)|*.jpg;*.jpeg|" + "Portable Network Graphic (*.png)|*.png"; if (op.ShowDialog() == true) { imgPatch.Source = new BitmapImage(new Uri(op.FileName)); txtName.Focus(); } } //Convert Image private void btConvertImage_Click(object sender, RoutedEventArgs e) { if (String.IsNullOrEmpty(txtName.Text)) { txtName.Focus(); MessageBox.Show("Preencha o Nome", "Error"); } else { save(ConvertFileToByteArray(op.FileName), txtName.Text); } } //Image to Byte Array private static byte[] ConvertFileToByteArray(String FilePath) { return File.ReadAllBytes(FilePath); } //Save Binary File and XML File public void save(byte[] img, string nome) { FileStream f; long ini, fin = img.Length; if (!File.Exists("Escudos.bcf")) { f = new FileStream("Escudos.bcf", FileMode.Create); ini = 0; } else { f = new FileStream("Escudos.bcf", FileMode.Append); ini = f.Length + 1; bin = new TestBinarySegment(); } bin.LoadAddSave("Escudos.xml", "Brasileiro", nome, ini, fin); BinaryWriter b = new BinaryWriter(f); b.Write(img); b.Close(); f.Dispose(); } //Load Image from Byte private void btLoad_Click(object sender, RoutedEventArgs e) { getImageFromByte(); } //Byte to Image public void getImageFromByte(int start, int length) { using (FileStream fs = new FileStream("Escudos.bcf", FileMode.Open)) { byte[] iba = new byte[fs.Length+1]; fs.Read(iba, start, length); Image image = new Image(); image.Source = BitmapFrame.Create(fs, BitmapCreateOptions.None, BitmapCacheOption.OnLoad); imgPatch2.Source = image.Source; } }

  Read the article

• C++ Filling an 1D array to represent a n-dimensional object based on a straight line segment

  - by Ben

  I'm struggling to find a good way to put this question but here goes. I'm making a system that uses a 1D array implemented as double * parts_ = new double[some_variable];. I want to use this to hold co-ordinates for a particle system that can run in various dimensions. What I want to be able to do is write a generic fill algorithm for filling this in n-dimensions with a common increment in all direction to a variable size. Examples will serve best I think. Consider the case where the number of particles stored by the array is 4 In 1D this produces 4 elements in the array because each particle only has one co-ordinate. 1D: {0, 25, 50, 75}; In 2D this produces 8 elements in the array because each particle has two co-ordinates.. 2D: {0, 0, 0, 25, 25, 0, 25, 25} In 3D this produces 12 elements in the array because each particle now has three co-ordinates {0, 0, 0, 0, 0, 25, 0, 0, 50, ... } These examples are still not quite accurate, but they hopefully will suffice. The way I would do this normally for two dimensions: int i = 0; for(int x = 0; x < parts_size_ / dims_ / dims_ * 25; x += 25) { for(int y = 0; y < parts_size_ / dims_ / dims_ * 25; y += 25) { parts_[i] = x; parts_[i+1] = y; i+=2; // Indentation hates me today .< How can I implement this for n-dimensions where 25 can be any number? The straight line part is because it seems to me logical that a line is a somewhat regular shape in 1D, as is a square in 2D, and a cube in 3D. It seems to me that it would follow that there would be similar shapes in this family that could be implemented for 4D and higher dimensions via a similar fill pattern. This is the shape I wish to set my array to represent.

  Read the article

• When to use new layouts and when to use new activities?

  - by cmdfrg

  I'm making a game in Android and I'm trying to add a set of menu screens. Each screen takes up the whole display and has various transitions available to other screens. As a rough summary, the menu screens are: Start screen Difficult select screen Game screen. Pause screen. Game over screen. And there are several different ways you can transition between screen: 1 - 2 2 - 3 3 - 4 (pause game) 4 - 1 (exit game) 4 - 3 (resume game) 3 - 5 (game ends) Obviously, I need some stored state when moving between screens, such as the difficulty level select when starting a game and what the player's score is when the game over screen is shown. Can anyone give me some advice for the easiest way to implement the above screens and transitions in Android? All the create/destroy/pause/resume methods make me nervous about writing brittle code if I'm not careful. I'm not fond of using an Activity for each screen. It seems too heavy weight, having to pass data around using intents seems like a real pain and each screen isn't a useful module by itself. As the "back" button doesn't always go back to the previous screen either, my menu layout doesn't seem to fit the activity model well. At the moment, I'm representing each screen as an XML layout file and I have one activity. I set the different buttons on each layout to call setContentView to update the screen the main activity is showing (e.g. the pause button changes the layout to the pause screen). The activity holds onto all the state needed (e.g. the current difficulty level and the game high score), which makes it easy to share data between screens. This seems roughly similar to the LunarLander sample, except I'm using multiple screens. Does what I have at the moment sound OK or am I not doing things the typical Android way? Is there a class I can use (e.g. something like ViewFlipper) that could make my life easier? By the way, my game screen is implemented as a SurfaceView that stores the game state. I need the state in this view to persist between calls to setContentView (e.g. to resume from paused). Is the right idea to create the game view when the activity starts, keep a reference to it and then use this reference with setContentView whenever I want the game screen to appear?

  Read the article

• Icon placement relative to list items

  - by Ronedog

  When I show a hidden div that is stored inside an <li> tag the icons are pushing down to the bottom of the <li>. How can I prevent this? Here's the HTML: <ul> <li>Utah <ul> <li>Park City <ul> <li>Park Cat 1 <div><img class="portf_edit" /></div> <div><img class="portf_archive" /></div> <div><img class="portf_delete" /></div> </li> <li>Skiing <div><img class="portf_edit" /></div> <div><img class="portf_archive" /></div> <div><img class="portf_delete" /></div> </li> </ul> </li> </ul> </li> </ul> Here's the li css: li { list-style-type:none; vertical-align: top; list-style-image: none; left:0px; text-align:left; clear: both; } .portf_edit{ float:right; position: relative; right:50px; display:block; } .portf_archive{ float:right; position: relative; right:-5px; display:block; } .portf_delete{ float:right; position: relative; right: -60px; display:block; } Here's a screen shot prior to expanding which shows the icons how I want them to line up: Here's the screen shot prior to expanding which shows where the icons are being pushed to:

  Read the article

< Previous Page | 349 350 351 352 353 354 355 356 357 358 359 360  | Next Page >