Search Results

Search found 22871 results on 915 pages for 'automated install'.

Page 354/915 | < Previous Page | 350 351 352 353 354 355 356 357 358 359 360 361  | Next Page >

  • Live CD installer gets stuck with a grayed out forward button.

    - by TRiG
    I have a CD with Ubuntu 10.10 and a laptop with Ubuntu 8.10. The laptop had all sorts of crud on it, and anything I wanted to keep was backed up on an external drive, so I was happy to do a wipe and reinstall instead of an update. So after a bit of faffing about trying to work out how to get the thing to boot from the CD drive, I did that. So the screen comes up with the choice: the options are Try Ubuntu and Install Ubuntu. I choose to install and to overwrite my current installation. So far so good. I then get a progress bar labelled something like copying files (I forget the exact wording) and further options to fill in for my location, keyboard locale, username and password. On each of these screens there are forward and back buttons. On the last screen (password), the forward button is greyed out. Well, I think to myself, no doubt it will become active when that copying files progress bar completes. The progress bar never completes. It hangs. And the label changes from copying files to the chirpy ready when you are. The forward button remains greyed out. The back button is as unhelpful as you'd expect it to be. And there's nothing else to click. We have reached an impasse. I tried restarting the laptop, to test whether it actually was properly installed. It wasn't. I tried to run Ubuntu live from the CD, to test whether the disk was damaged. That wouldn't work either, but I suspect it's just because the laptop is old and has a slow disk drive. I'm typing this question on another computer using the Ubuntu live CD and it's working fine. So there's nothing wrong with the CD.

    Read the article

  • Ubuntu 10.10 and Windows 7 (TrueCrypt) Multi-boot Problems

    - by Samuel Taylor
    I have now been searching days for a solution but have found nothing. I have Ubuntu 10.10 and Windows 7 with TrueCrypt as a multi-boot. It was working fine for a few weeks until I needed to reinstall Ubuntu. If I have the boot flag on the partition where Windows 7 is install (This is where the boot flags was when working before.), it boots fine in to Windows 7 but when pressing Esc it can't find grub2. If I have the boot flag on the partition where Ubuntu is install, it boots fine in to Ubuntu (by pressing Esc or typing the password) but unable to access Windows. I have tried reinstalling TrueCrypt Boot loader and repairing the header but it have no affect. My Partitions: sda1 - Windows 7 Recovery (GRUB2) sda2 - Windows 7 (TrueCrypt Boot Loader) sda3 - Ubuntu 10.10 (/) sda4 - Extended sda5 - Swap sda6 - Ubuntu (/home) Does anyone have any ideas? Thanks Sam

    Read the article

  • Anti-virus protection question?

    - by DaBaer
    About 4 years ago, I found Kaspersky and have been using the most current version since. Most people try and argue the use of AVG or Avast to me, and there are some very solid reasons I do not go that route. Over the years, I have found Kasp to become bulkier and bulkier, and have had issues setting it up for friends/family/clients. I am just curios on possible recommendations from other users, with my criteria in mind: What I like about Kasp in the past: The license sold in stores in a 3 pack, is considered a commercial license, and emails from Kasp in response to my questions, make it clear that I can do with the 3 licenses that I want, providing I do not use more than 3 installs per Key. So, allowed me to buy 3, 5, and 7 packs, and resell to users at a cheaper cost than what they would pay if they bought their own license. The ability to easily obtain a currently updated .exe for installation on multiple peoples machines. Power of the scan. Kasp has been a good solution for me (even when using a trial license) on cleaning up machines that were badly infected (in which AVG and AVAST were unable to.) Speed of install/update. After a cleanup of malwarebytes, spybot, mcafee stinger, ccleaner, and combofix, I used to be able to get Kasp Int Security installed and updated in around 5 minutes. The issues that I have with the free AV, is strength of protection. In my opinion for someone who is a 'power use' these are good alternatives, because such a user should be trained or knowledgeable enough to be careful and not get themselves in trouble. Most of the users I assist, are too PC ignorant to know any better, and go hogwild on the web. It has been my experience that the number of people coming back to me with spyware/malware/virus issues since I have converted from AVG to Kasp has been cut down to around 20% of what it used to be 4 or 5 years ago. In a perfect world, I could install and use Kasp Internet Security 2008, and be very happy. But this is not the case anymore. So after this long description of what I used, and have used, does anyone have any good recommendations on AV that isn't going to cost me too much per install?

    Read the article

  • Packaging MATLAB (or, more generally, a large binary, proprietary piece of software)

    - by nfirvine
    I'm trying to package MATLAB for internal distribution, but this could apply to any piece of software with the same architecture. In fact, I'm packaging multiple releases of MATLAB to be installed concurrently. Key things Very large installation size (~4 GB) Composed of a core, and several plugins (toolboxes) Initially, I created a single "source" package (matlab2011b) that builds several .debs (mainly matlab2011b-core and matlab2011b-toolbox-* for each toolbox). The control file is just the standard all: dh $@ There is no Makefile; only copying files. I use a number of debian/*.install files to specify files to copy from a copy of an installation to /usr/lib/. The problem is, every time I build the thing (say, to make a correction to the core package), it recopies every file listed in the *.install file to e.g debian/$packagename/usr/ (the build phase), and then has to bundle that into a .deb file. It takes a long time, on the order of hours, and is doing a lot of extra work. So my questions are: Can you make dh_install do a hardlink copy (like cp -l) to save time? (AFAICT from the man page, no.) Maybe I should just get it to do this in the Makefile? (That's gonna b e big Makefile.) Can you make debuild only rebuild .debs that need rebuilding? Or specify which .debs to rebuild? Is my approach completely stupid? Should I break each of the toolboxes into its own source package too? (I'll have to do some silly templating or something, because there's hundreds of them. :/)

    Read the article

  • linux installation cd enviroment

    - by haw3d
    i recently make a custom linux system, for my special need. its on my HDD, but i want to create a cd for installation. multiple day ego, i found a livecd and create install script for that, but in power failure my HDD is gone, and i cant found that live cd again. my install script is based on recoverin tar.gz backup. my requorement is: based on glibc (not uclibc) recognize every devices have you any suggestion? excuse me for my bad english.

    Read the article

  • Can't Read/Write the Hard disk used in NAS

    - by mgpyone
    I've lately purchased a Synology DS212j and I intended to use my two 3.5" HDs into it. One of them was in used as an external HD. Thus when I install these two unit in NAS, it asked me to formatted in order to used with its format (I think it's ext3?) . I installed the Disks and omit the formatting option. I just got another 3.5" Hard Disk now. I've installed it in the NAS. everything's fine. However, when I take out the (used) HD from the NAS and install back in the standalone casing, I found out that it can't be read from both OSX an Windows 7. I've tried with ext2sd and I only found 2GB portion of the whole 1.5 TB Hard Disk. Here's another reference from EASEUS Partition Master

    Read the article

  • Combine OS partion with data partition on NAS4Free/FreeNAS

    - by Pak
    I recently built a NAS4Free (formerly FreeNAS) machine using a 256MB (yes, MB) USB drive for the OS. When I did the original install, I had the bright idea of making the OS partition just big enough for the OS and a then creating a second partition using the remainder of the drive to store stuff pertaining to the OS. I never really found a use for the data partition and I ended up running out of space on the OS partition, so now I'd like to combine the partitions into a single partition. Is this something that is possible to do while everything is up and running? If it comes down to it, I can take down the machine and do a fresh install of the OS using the entire space of the USB drive, but I'd like to use this as an opportunity to better familiarize myself with FreeBSD/UNIX type systems. If this is possible, will it interfere with the NAS4Free things? The data partition shows up in the web interface under the disks section. If I end up manually changing the partitions, I'd be concerned with NAS4Free getting confused by the missing partition.

    Read the article

  • Deleted info in Boot folder

    - by user207984
    First off, I'm using Zorin 7 OS. So my Boot folder was too full to install any new updates, I used a tutorial I found somewhere on here to remove the unneeded linux-image files, and must of also deleted the latest one as well. Now when I attempt to boot I get error: no such partition. grub rescue> I used my MultiSystem USB to install (on a separate partition) a different Linux OS (Kali) and no longer get that error, however, it will ONLY give me the option to boot Kali Linux. Here's the biggest new problem though, I used the built in option of hard drive encryption for Zorin 7 when I initially installed it, so now when I attempt to explore it (to get all my saved data which is REALLY important to me), it asks me for password for encryption. However, the password says it in not recognized, and I know it's right, I had to type it in every single day. So I either need a way to restore my Zorin 7 boot files or GRUB or whatever, so I can boot it up... or I need to know how to fix my encryption problem to save all my info.

    Read the article

  • Windows 2003 SP1 terminal server printers Disappear after reboot - HP laserjet 4240

    - by Alex
    had working PCL6 laserjet 4240 driver. needed to downgrade to PCl5, tried but did not get clean install. tried again and it seemed to work (this is 2003 enterprise terminal server SP2) Have over 40 working laserjets (5, 4000, 4100 and 18 of the 4240) After normal nightly reboot the 18 4240 printers were 'gone'. Worked w/Microsoft who said bad HP driver issues - weird since they work on other terminal servers. downloaded latest version, etc. from HP site and can NOT get to work. As soon as I install, then do a Net Stop Spool and Net Start Spooler the printer is 'gone'. Current workaround is to use HP 4000 PCL5 drivers for all of these 4240 printers.

    Read the article

  • How to change Winamp's default skin to Bento?

    - by TomatoSandwich
    If I install Winamp through automated means (e.g. Using http://ninite.com/), it is automatically installed using the default 'boxy' skin. I can't work out how to interface with this skin as easily as the new 'Bento' skin. In addition, there doesn't seem to be an option to download the Bento skin, or change the skin from Default to Bento without uninstalling and reinstalling it again. Is there a menu option or a downloadable skin that is the default Bento skin? Or do I have to re-install to get this 'new default' skin?

    Read the article

  • Stop Windows 7 from forcefully shutting itself down when waiting to update

    - by Kenneth
    I have had this happen to me twice now. I'll be in the middle of working on something that has resulted in me not rebooting my machine for several days. If Windows 7 is waiting to install updates it'll eventually get to a point where it forces a restart to install the updates. The problem is that it doesn't notify me or tell me that its going to do this and I've lost work as a result and most recently had a VM become corrupt and unusable. Is there a way to at least get it to prompt me before doing this? It used to...

    Read the article

  • Failed 11.10 to 12.04 upgrade and drove me crazy!

    - by Ivan
    Please help me with this! I first tried to upgrade my Ubuntu server from 11.10 to 12.04 thru Upgrade Manager, but never succeeded! Then I tried upgrading thru terminal, which took me ~4 hours as I was warned. When I restarted my computer, my login GUI did not show up at all! (Panic I was!) But when I switched to tty6 and it seemed the upgrade has finished, at least partially and got message Ubuntu 12.04LTS and telling me 12.10 is available. There are bunch of unmet dependencies...."apt-get install -f" may resolve the problem. Then I tried: sudo apt-get -f install, did not succeed! Also I tried sudo apt-get update && sudo apt-get upgrade I got bunch of error message too long to list here. Then I tried: sudo do-release-upgrade still bunch of error message there! There seems a lot trouble with the upgrade from 11.10 to 12.04 for me. Did I miss anything? Anyway, can I ask how I can get the gnome login GUI back? Thanks a lot! Yifang

    Read the article

  • How do I restore the default applets to Gnome's notification area?

    - by gbacon
    I have a fresh install of Karmic Koala. In a botched attempt at trying to change my default window manager, I somehow removed at least three applets from the notification area: network manager (nm-applet), volume control (gnome-volume-control-applet), and the battery meter (???). Now if I logout and back in, these applets don't run, but I can start them from the command line. Because it's a fresh install, I completely removed my luser account and home directory. After recreating my account, I was frustrated to find that the applets are still missing and no obvious way to add them back. How can I restore the default configuration?

    Read the article

  • How to determinate prerequisite of a setup ? DisplayLink on WindowsXP embedded wont start

    - by user35320
    Hi, I want to install DisplayLink on an embedded Windows XP device. The problem is that the setup starts and asked for my approval and after I confirmed it nothing happend. The setup just dissapear. On the official DisplayLink site there they say that they dont support embedded system but there must be a way to get this working on it. So I am searching for a tool to see what the setup is trying to open or what the preerequisite of it are to install it and try to get this working. Thanks for you help

    Read the article

  • Installing Django on Windows

    - by Pranav
    Ever needed to install Django in a Microsoft Windows environment, here is a quick start guide to make that happen: Read through the official Django installation documentation, it might just save you a world of hut down the road. Download Python for your version of Windows. Install Python, my preference here is to put it into the Program Files folder under a folder named Python<Version> Add your chosen Python installation path into your Windows path environment variable. This is an optional step, however it allows you to just type python in the command line and have it fire up the Python interpreter. An easy way of adding it is going into Control Panel, System and into the Environment Variables section. Download Django, you can either download a compressed file or if you’re comfortable with using version control – check it out from the Django Subversion repository. Create a folder named django under your <Python installation directory>\Lib\site-packages\ folder. Using my example above that would have been C:\Program Files\Python25\Lib\site-packages\. If you chose to download the compressed file, open it and extract the contents of the django folder into your newly created folder. If you’d prefer to check it out from Subversion, the normal check out points are http://code.djangoproject.com/svn/django/trunk/ for the latest development copy or a named release which you’ll find under http://code.djangoproject.com/svn/django/tags/releases/. Done, you now have a working Django installation on Windows. At this point, it’d be pertinent to confirm that everything is working properly, which you can do by following the first Django tutorial. The tutorial will make mention of django-admin.py, which is a utility which offers some basic functionality to get you off the ground. The file is located in the bin folder under your Django installation directory. When you need to use it, you can either type in the full path to it or simply add that file path into your environment variables as well. Hope this helps!

    Read the article

  • Office features disabled in standalone Outlook

    - by Jared275
    I have Office 2007 basic suite installed on my computer. I installed Outlook 2010 from a volume license provided by our Email Server Provider. When creating a new email all of the Office features are disabled in the ribbon. This microsoft support article describes my issue, however I do not have Office installed as click and run. It seems to me that there should be a way to make outlook recognize the office suite already installed. The "add or remove features" dialogue accessed through programs and features from the control panel seems promising, however its only options for "office features" are run from computer, or install on 1st run. I can't seem to find any valid articles online that aren't just dealing with the click to run issue. I know that there are several people at my company with the same set up, installed the same way that have everything working fine. How can I get my standalone Outlook 2010 install to recognize the Office 2007 basic suite?

    Read the article

  • Strange issue with 64 bit OS

    - by Sherwin Flight
    So I own two versions of Windows 7, one is 32 bit, the other is 64. The 64 bit version came with my new desktop, and the 32 bit version came with my Laptop. I was doing a clean install of my laptop, and the install went smooth, Windows is up and running! However, after installing it I realized that I accidentally used the 64 bit installation disk instead of the 32 bit version. I confirmed this in the System Information screen, it says: System type: 64-bit Operating System As far as I knew this laptop was only a 32 bit machine. My understanding is that a 64 bit OS would NOT run on 32 bit architecture. Am I correct with this assumption? If this was a 32 bit laptop is there any way a 64 bit OS would even run at all on it?

    Read the article

  • What is a safe way to dispose of personal info on an old laptop and what to do with said laptop?

    - by MikeN
    I have an old laptop someone gave me that only has 64Megs of RAM on it and runs WIN XP. I wanted to wipe the drive clean by installing Ubuntu Desktop to remove any shred of personal information on it and to make it useful to someone else. But the Ubuntu installer keeps failing because there is not enough RAM. Is there another version of Linux that would easily install on a 64 Megs of RAM system? 2nd part of question, what do I do with this old laptop? It doesn't have a battery anymore and has to be plugged into the wall to run. Assuming I can install a good Linux distro on it, who do I give it to? Salvation Army? I'm looking to just have it be useful to someone or some organization for spare parts or some basic computer usage.

    Read the article

  • Hosting a magnet link site which could possibly infringe copyrighted material?

    - by Griff
    I have for the last 3 months built a crawler, indexer and alot of other things for what started out to be a home project for indexing magnet links on the internet. As my project grew I have thought about releasing my collected data (which at the minute is on a public domain but with no access) to the public. Whatever the crawler sucks in goes in, and whatever the indexer decides to index gets indexed as it is a fully automated process. My question is as follows; Considering that most of the data that is collected from what I have built points to illegal copyrighted material (as most magnet links do) where would it be best to host such a site. I notice all of the already public torrent sites are hosted in India is this because there laws are less strict on copyright infringement? Have any of you hosted such a site, and if so what problems have you ran into? And as always any advice on being a webmaster for this type website?

    Read the article

  • Do best-practices say to restrict the usage of /var to sudoers?

    - by NewAlexandria
    I wrote a package, and would like to use /var to persist some data. The data I'm storing would perhaps even be thought of as an addition for /var/db. The pattern I observe is that files in /var/db, and the surrounds, are owned by root. The primary (intended) use of the package filters cron jobs - meaning you would need permissions to edit the crontab. Should I presume a sudo install of the package? Should I have the package gracefully degrade to a /usr subdir, and if so then which one? If I 'opinionate' that any non-sudo install requires a configrc (with paths), where should the package look (presuming a shared-host environment) for that config file? Incidentally, this package is a ruby gem, and you can find it here.

    Read the article

  • How do I setup PHP locally on Windows 7 with Tomcat 7 already installed?

    - by James Drinkard
    I have Windows 7 64 bit running on my laptop with Tomcat 7 installed to run my java programs using Eclipse. Now I need to be working with PHP and as I went to install it, I read you need to install Apache Web Server first, before installing PHP. Then I read where you can run PHP under Tomcat or run PHP on Apache Web Server while still using Tomcat, if you reset the default port on one of them as Tomcat and Apache Web Server would use the same ports by default. What is the best way to do this? I don't want to was lots of time getting stuck on configuration issues.

    Read the article

  • Creating ISO image of NTFS partition in Ubuntu

    - by Pappai
    Hi, I have a system that has to be formatted often because of the specific use of it (Use it in internet cafe). I have to install the drivers and apps each time. That is a time consuming and cumbersom task for me. I want to install windows, drivers, apps etc. once and create a backup of the entire C:\ drive, and keep it in a linux partition so that I can restore the OS with all the apps & drivers ready to go! I have ubuntu live CD with me and I have created a linux partition (ext4) in the HDD. My question is: How can I create an ISO image of the C:\ drive (ntfs disk) in Ubuntu and store it in the linux partition?

    Read the article

  • LiveCD/USB boot issues with Ubuntu 12.04 on blank drive

    - by Richek
    Not sure how common this issue is, or even how badly I may be missing something simple, but I am a first time usuer having some serious problems. Some background: old HDD running Windows 7 developed too many bad sectors and is bricked. I'm attempting to install Ubuntu 12.04 on a fresh 1TB drive by booting from a liveCD USB flash drive. I've not been able to get past the initial menu screen, however, as the process stalls out shortly after selecting an option (both boot from drive and install to drive). I've tried multiple USB drives as well as CDs, modified the boot order, flashed BIOS, and even tried booting with only the flash drive and the keyboard connected with the same results.Typically what I observe is that the OS begins what I think is compliling, listing drivers and components before freezing on one. When the keyboard is plugged in, its the keyboard driver, before I flashed BIOS, it was a BIOS related item, now its an unknown entry. The computer seems to be reading the drive (idicated by USB light flashing or CD drive reving) for roughly 10 minutes with no progress, followed by the drives going quiet. Some spec info: Motherboard: ASUS P5Q Pro, BIOS version 2102 (latest version), Intel chipset CPU: Intel Core 2 Duo E8400 Wolfdale 3.0GHz help would be appriciated!

    Read the article

  • You Can Deliver an Engaging Online Experience Across All Phases of the Customer Journey

    - by Christie Flanagan
    Engage. Empower. Optimize. Today’s customers have higher expectations and more choices than ever before.  To succeed in this environment, organizations must deliver an engaging online experience that is personalized, interactive and consistent across all phases of the customer journey. This requires a new approach that connects and optimizes all customer touch points as they research, select and transact with your brand.  Oracle WebCenter Sites combines with other customer experience applications such as Oracle ATG Commerce, Oracle Endeca, Oracle Real-Time Decisions and Siebel CRM to deliver a connected customer experience across your websites and campaigns. Attend this Webcast to learn how Oracle WebCenter: Works with Oracle ATG Commerce and Oracle Endeca to deliver consistent and engaging browsing, shopping and search experiences across all of your customer facing websites Enables you to optimize the performance of your online initiatives through integration with Oracle Real-Time Decisions for automated targeting and segmentation Connects with Siebel CRM to maintain a single view of the customer and integrate campaigns across channels Register now for the Webcast.

    Read the article

< Previous Page | 350 351 352 353 354 355 356 357 358 359 360 361  | Next Page >