Search Results

Search found 14757 results on 591 pages for 'switch statement'.

Page 355/591 | < Previous Page | 351 352 353 354 355 356 357 358 359 360 361 362  | Next Page >

• Netgear Router missing Wireless Configuration Menu Link

  - by ccisystems

  I have a Netgear WiFi router DG834G v3. On it it says it's a WiFi, ADSL 2+ modem, switch, etc. There is an antenna on the back and a WiFi indicator on the front. However, when I connect to it via the web interface, the wireless setup link is missing from the menu. The top label indicates it is a DG834 (without G). I have received it from a friend and was really looking forward to using it but I really need the WiFi part. I looked on Netgear's site as I thought someone must have uploaded the wrong firmware for the device sometime - so I upgraded to the latest firmware, but it still says it's NOT a 'G' device and the wireless menu is nowhere to be found. I'd appreciate a push in the right direction as to what I could do. Is it possible that the WiFi chip is broken or something and the device does not detect it and the firmware reverts the device to a different version?

  Read the article

• Google Chrome suspicious connections

  - by Poni

  I'm using Chrome at Windows and with TCPView (of the SysInternals freeware suit) I see that chrome.exe establish connections to these IPs: 173.194.37.104 209.85.146.138 Using http://www.ipaddresslocation.org/ I check about these IPs and see they're related to Google. Now, in order to clarify, these are the exact things I do: Open up chrome, the default page is set to BLANK (i.e no homepage whatsoever). Then I get into my website which has a blank page, so no "other" http requests are made. Right from this point there is a persistent connection, usually to '173.194.37.104'. What are these?? Very suspicious.. Edit #1: - I'm in 'incognito' mode right from start, when launching Chrome, using a shortcut with the '-incognito' switch. - I've turned off all phishing protections and other "advance" features in order to reduce Chrome's network activity.

  Read the article

• System has reached the maximum size allowed for the system part of the registry

  - by Bob Denny

  To be precise System has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored. WinXP/64 running fine for 2 years (no /3Gb switch), just started happening. I used ntregopt and the problem went away at least temporarily. However, looking before and after in Windows\System32\Config I see that my System file was reduced only by 10% and is still 170+ Mb. According to my rather extensive research with Google, this is "huge" and should be more like 10-20Mb. The system runs fine. There is a System.bak that is only 11Mb and has the date when I ran ntregopt. That's what I know. Now my question: Is there anything I can do to reduce or rebuild the System registry hive given the above info?

  Read the article

• Nagios: Which services should I monitor on different roles of servers?

  - by Itai Ganot

  I've started working in a new workplace and my first task is to build a Nagios server and configure it to monitor the servers in the network. Since I'm starting from scratch I wanted to hear from you, experienced users, which checks should I configure for each role? For example, there are some basic checks which I run on each Linux machine I monitor: SSH, Ping, Load, Current Users, Swap Usage, etc... Now my question is, which specific checks should I run for a DataBase server, for a Networking Switch, for Httpd servers? (I currently monitor how many httpd processes are running) Thanks in advance

  Read the article

• Rhythmbox - put a playlist on my iPod

  - by GorillaSandwich

  I have an old iPod nano and currently use iTunes in Windows to management. However, I'm trying to switch to Ubuntu. So far, iPod management is one major holdup. Besides being unable to easily manage podcasts, I also don't see a way to create a playlist and put it on my iPod. I can create a playlist on the computer in Rhythmbox, but I can't drag and drop it onto the iPod. I can create a playlist on the iPod itself, put I can't drag and drop songs from my library into it. If I right-click the songs, I can add them to playlists on the computer, but not on the iPod. How can I create a playlist of music in Rhythmbox and sync it to my iPod?

  Read the article

• fsck: FILE SYSTEM WAS MODIFIED after each check with -c, why?

  - by Chris

  I use a script to partition and format CF cards (connected with a USB card writer) in an automated way. After the main process I check the card again with fsck. To check bad blocks I also tried the '-c' switch, but I always get a return value != 0 and the message "FILE SYSTEM WAS MODIFIED" (see below). I get the same result when checking the very same drive several times... Does anyone know why a) the file system is modified at all and b) why this seems to happen every time I check and not only in case of an error (like bad blocks)? Here's the output: linux-box# fsck.ext3 -c /dev/sdx1 e2fsck 1.40.2 (12-Jul-2007) Checking for bad blocks (read-only test): done Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information Volume (/dev/sdx1): ***** FILE SYSTEM WAS MODIFIED ***** Volume (/dev/sdx1): 5132/245760 files (1.2% non-contiguous), 178910/1959896 blocks

  Read the article

• Mouse Icon Distorted on Secondary Display

  - by Nathan Taylor

  I have a strange issue with a dual monitor, extended desktop setup where the mouse is always fine on the primary monitor, but sometimes when I move to the secondary display the icon becomes garbled and distorted (sometimes it just looks like a vertical line, instead of a pointer). If I move the mouse back and forth rapidly between primary and secondary displays the level of "garbledness" of the icon will change and sometimes go away completely. If I switch the display settings and set it to "Duplicate Monitor 1" then I end up with a garbled icon on the primary display and an accurate one on the secondary. Very annoying. Computer is Windows 7 Ultimate with an HD8750 and the newest video drivers. Monitors are two Dell 24" displays connected via DVI cables. I have also tried VGA cables.

  Read the article

• Trigger ZFS dedup one-off scan/rededup

  - by Jake Wharton

  I have a ZFS filesystems which has been running for some time and I recently had the opportunity to upgrade it (finally!) to the latest ZFS version. Our data doesn't scream dedup but I firmly believe based on small tests that we could gain anywhere from 5-10% of our space back for free by utilizing it. I have enabled dedup on the filesystem and new files are slowly being dedupified but the majority (95%+) of our data already exists on the filesystem. Short of moving the data off-pool and then recopying it back, is there any way to trigger a dedup scan of existing data? It doesn't have to be asynchronous or live. (And FYI there isn't enough room on the pool to copy the entire filesystem to another and then just switch the mounts.)

  Read the article

• If i make a mail server can i send bulk email?

  - by Jake Smith

  I work for a small company and we have fallen into the fad of "email campains" a.k.a Junk mail. So far the company has gotten a subscriber list from our website, and paid a good chunk of change for a emailer program. The problem is, Our list has close to 4,000 people on it and growing. with gmail only allowing 100 emails per account through on SMTP and I am on a tight budget so I cant hire anyone else. I was thinking of doing a dedicated mail server off of the website server we have running in the office. Is it possible? to make emails on your own server, and then send it through your own SMTP? if it is, what software would I need and is if free or low cost at least. We run a WAMP server, i set it up just for information, but i could switch it to lamp or whatever if need be. Thank you for your time and youre answers

  Read the article

• Slow LAN transfer from 3rd party computer

  - by Chris

  Hi Everyone, I've got an odd problem that I'm not really sure where to start the troubleshooting process. I have a 'server' with Windows Server 2008R2 (64-bit) installed and it has a couple of hard drives. If I Remote Desktop into the server and transfer files from one HD to the other, all it fine. If however, I use my workstation (Windows 7 64bit) and open up a shared resource on the server and transfer a file from one hard drive on the server to another HD on the server (not using Remote Desktop, just Windows explorer/Network places), the transfer crawls... It takes about 5mins to discover files/calculate the transfer and then starts transferring at speeds like 56KB/s - 200KB/s. Both machines have Marvel GigE network ports with a TrendNet 8-port green GigE switch. I've set Jumbo packets to 9K on both machines...

  Read the article

• How to disable VGA on new server... reversibly?

  - by Javawag

  Strange question here. I have a server with 1GB of RAM, however when booted this shows as 768MB. I've discovered the reason for it – and that is that it has an unboard graphics card which shares memory with main RAM. Running Ubuntu Server, it doesn't actually ever use anything graphical – it's all set up to be SSH'd into and therefore there's no need to use the VGA. I believe there may be a setting to switch off VGA/graphics card in BIOS, but my question to you guys is: is this recommended? and if I turn it off, then how would I turn it back on again in BIOS (given that with it off, I wouldn't be able to see the option to turn it on as there would be no graphics output!!)?

  Read the article

• How do you map a solo press of a modifier key to its own function or mapping on Windows?

  - by Conrad.Dean

  Today on hacker news there was a clever article on custom shortcut keys. The author talks about a technique for remapping a modifier key such as CTRL to ESC if CTRL were pressed without a modifier. This is useful in vim because of how often you need to press ESC. Another technique he describes is mapping the open parenthesis, ( to the left shift key, and ) to the right shift key. If another key is pressed when shift is held down, the shift key behaves normally. The author describes the software he uses on OSX, but is there a way to do this on Windows? I've heard of AutoHotKey but it seems to only fire macros when simple keys are pressed, rather than the conditional state switch that this would require.

  Read the article

• Understanding why a 450W power supply is destroying my ATX motherboards but not mATX

  - by T. Webster

  Maybe I'm missing something really obvious here, but after going through 3 new motherboards in trying to build my new machine, I'm finally certain that the 450W power supply I bought has been destroying them. It seems like it should be simple: just connect the connectors where they fit and switch the thing on. But today after hooking it to my ASUS Sabertooth 990FX TUF Series Motherboard and switching it on, I could see and smell the smoke coming out of the motherboard. What I don't get is why I can hook this same 450W power supply up to my mATX motherboard and not run into the same problem. What am I missing here? Where on the box or manual is this? (I have 8x2 GB RAM, AMD FX-4100 3.6GHz CPU, 1 512MB ATI graphics card, 1 WD 7200 RPM SATA hard drive. )

  Read the article

• What's the meaning of logging in as "[email protected]:something"

  - by Harvey Kwok

  My Windows 2008 R2 machine is joined to a domain. In the logon screen, if I type in "[email protected]:something" as the username, I can still logon properly, what's the meaning of ":something" appended at the end? I can even see the current user is displayed as "[email protected]:something" in the switch user screen. Is it a feature in Windows? Or is it just a bug? If it is a feature, what's the difference between logging in as "[email protected]" and logging in as "[email protected]:something"? Note that I tried different combinations like "mydomain\username:something" and "mydomain.com:something\username". None of them work except "[email protected]:something".

  Read the article

• How do I set up different configurations on an Ubuntu laptop based on different physical locations?

  - by Andrew Larned

  I'm looking for a way to have a couple (or three) multiple configurations set up on my laptop, and easily switch between them. To be more specific, when my laptop is at work, it's plugged into a second monitor, and has a specific set of networks configurations. At home, the second monitor is gone, the network configurations are different. At a public wireless point there are other configurations to set, etc. I know I can go into my preferences and turn on/turn off the monitor, and mess with the networking preferences, and so on, but I'm looking for a way to change a bunch of preferences all at once, and if it's possible to do that automatically, maybe based on the wireless APs in the vicinity, that would be even better.

  Read the article

• Is it dangerous to use both Sky Drive and Dropbox?

  - by Matthew

  I'd like to experiment with Sky Drive, but keep using my Dropbox account unless I decide to switch. This answer gives instructions for how to set up both at the same time, but I'm a little worried about data integrity. Is there any danger involved here? Will Sky Drive and Dropbox fight each other? Note that I am using Sky Drive/Dropbox on multiple computers, so they will be writing data as well as reading it. Is this safe? Edit: I can use them with different folders if necessary, but I'm particularly curious what would happen if they sync from the same folder.

  Read the article

• Increase the compression performance of VPN

  - by Martin

  I am currently switching from a system with HPN-SSH tunnels and enabled compression to something VPN based. I have tried tinc and n2n so far, hamachi requires a library I do not have. In my primitive benchmarks I am not satisfied with the achievable bandwidth compared to the SSH tunnels. In tinc the low LZO setting performed best, but compression is only available in UDP mode. Ideally I would like to have a TCP-based VPN with a multi-threaded compression. Can you suggest me some ideas how to increase the performance? Would it be possible to somehow put a compression filter in front of the tun interface? Or are there any VPN implementations that might be better suited for my needs (fast compression, TCP-based, switch mode, does not have to be super-secure)? I would consider tunnelling Ethernet over SSH, but according to some articles it is not advisable.

  Read the article

• User reduced LVM logical volume without resizing filesystem

  - by Matthew

  I received an email yesterday that one of our users was trying to make room for a heartbeat/clustering package which requires its own partition to act as a voting disk. To do this, he attempted to reduce the size of the root partition's logical volume, and then create a new logical volume for this purpose. However, he forgot to resize the filesystem first (or include the -r switch in the command). He also forgot to unmount the root partition by running this process from a rescue cd. The system is now refusing to boot into the OS with the following error: Either the superblock or the partition table is likely to be corrupt! Unexpected Inconsistency; run fsck manually. The system them drops the user into single user mode. Is it possible to rescue the filesystem, or is it hosed? Its running ext3.

  Read the article

• Sony Bravia KDL-32L5000 PC resolution slightly off

  - by user18818

  I have a PC running two Nvidia 8500 GTs in SLI mode and I am trying to use my TV in dual mode. When I switch the TV to PC the screen is nearly centered with a slight offset. All resolutions are effected from 800x600 all the way up to the TVs native 1360x768. I have tried with SLI on and off and have PhysX turned off as well as I thought that might have an effect. I am running Windows XP 64-bit SP2 DirectX ver 9.0c Nvidia driver version 181.22 Any other information please let me know. Thanks in advance.

  Read the article

• Quickbooks Error - Can't turn off auto updates

  - by Murtez

  My company uses quickbooks pro 2002 and unfortunately they won't upgrade at this time, the program keeps freezing and giving methe error: This action cannot be completed because this program is busy.. Then asks to switch or retry, I tracked it down to being an issue with IE since it's an old program and can't use the new versions of IE (the program uses IE for it's interface for some STUPID reason). Everyone says to disable auto updates but the problem is that I can't get to the options area to disable the updates (the options area uses IE!!!) so I'm screwed, I have to sit there and click retry 40-50 times several times a day and it's driving me nutz. I've been looking online for days but have not found a solution to this predicament. Is there a way to disable auto updates through the configuration files? Any help is greatly appreciated.

  Read the article

• Computers "applying computer settings" for a long time on start-up...why?

  - by tombull89

  Hello. Might be a bit of a slong shot but I'm stumped, along with the ICT Manager for the school I'm working it. In one of the IT rooms when you switch a computer on it will boot through BIOS fine, but when it gets to "applying computer settings" it can hang for a long time (~15 minutes). If you unplug the computer from the network it starts up fine, gets to the login screen, then you can plug the network cable in and it will work fine. I don't think it's anything to do with the fact we've been coming close to running out of IP addresses or a problem with our DHCP. Microsoft KB says apply the latest service pack, which we've done, and check a service. Servers and domian controllers are S2003, Computers and Desktops are XP. Does anybody have any thoughts on what to try?

  Read the article

• Testing DNS configuration of domain by using hosts file?

  - by Alex Blundell

  I'm currently migrating a website to another server, and want to test the DNS configuration (more specifically, email mx records) before moving the domain over. I've configured the DNS on the new server to have mx entries for Google Apps in the same way that it's configured on the old server. The domain is controlled by nameservers on the old server at the moment, so the change would simply be updating the nameservers to the new servers. (What I'm getting at is DNS is controlled at the server level, not registrar level). Since the website has quite a number of users, I want to make sure the configuration is right before flicking the switch. For this, can I add an entry to the hosts file of my local computer to point the domain to the new server? I've done this, and the web server works, but would this also test the email mx records on the new server?

  Read the article

• Issue with Toshiba Satellite C50 A-1JM

  - by Nathan Hawkes

  I am having some odd problems with my Toshiba laptop. For the last two days, it has not loaded past the boot screen for hours, if at all. When I force the laptop off and switch it back on, it goes to the Preparing Automatic Repair process but will not complete the process and go to the desktop. However, this only happens when the battery is plugged in. When I remove the battery and run the laptop on power, it works without issue. Would this be a battery issue (given it works without the battery) or a hard drive issue (given it won't get past the boot screen)? If neither, what would you suggest as a solution?

  Read the article

• How do I SCP/FTP to a Coraid SR2421

  - by Pitto

  I need to save data to a Coraid SR2421. I am no expert and I'm trying to understand how this costy piece of hardware works. All I have is a Ethernet cable connecting my laptop and the coraid to a switch and the coraid's console with cursor blinking. Any kind of help would be greatly appreciated. edit and further explanation: I've tried using software on the coraid website but It's not working. So I've contacted the support and they sent me a file to upload on the coraid. It looks like if I upgrade coraid's firmware then I'll be able to use the coraid software on the windows side. That's why I'd need SCP/FTP or any kind of solution to copy a file in the partition that can be read from coraid console command line so I can launch the update command as requested. I hope I was a bit clearer now.

  Read the article

• how can i realize a video-wall on 3-9pc with vlc

  - by Luca

  hello! i have to create a videowall, from 3 to 9 monitor. every monitor as a pc. actually, i stream from a server 9 movies with different istances of VLC, but i could also play on every machine the relative video with a single player. there's no problem. the real problem is that i really dont know how to sync the videos on a LAN...unfortunately there is a NETSYNC module inside VLC wich is NOT working. here are some info about my setup: videowall from 3 to 9 monitor || from 3 to 9 pc, all with the same configuration || a gigabit router+switch for the "dedicated" LAN im really stuck in this situation, if anyone has an idea or just a completely different solution, please, share it with me! thanks a lot in advance! :)

  Read the article

< Previous Page | 351 352 353 354 355 356 357 358 359 360 361 362  | Next Page >