Search Results

Search found 9728 results on 390 pages for 'zee pro'.

Page 356/390 | < Previous Page | 352 353 354 355 356 357 358 359 360 361 362 363  | Next Page >

• (manually configured) kernel update leaves wireless in a mess

  - by Mala

  I recently upgraded my kernel from 2.6.31-gentoo-r6 to 2.6.32-gentoo-r7. In both cases, I configured everything manually. However, since the upgrade, my wireless card appears to be on the fritz. It will connect to networks just fine, and remain connected, but can only access the internet (and other hosts on the network) for about 3 seconds after connecting. Reconnecting to the network appears to fix the problem... for another 3 seconds or so. The problem is "solved" by booting into the older kernel. The relevant lspci entry is 02:00.0 Network controller: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection I'm pretty sure I have the correct drivers enabled in the kernel Device Drivers ---> Network device support ---> Wireless LAN (IEEE 802.11) ---> <*> Intel Wireless Wifi [*] Enable LED support in iwlagn and iwl3945 drivers [*] Enable Spectrum Measurement in iwlagn driver [*] Enable full debugging output in iwlagn and iwl3945 drivers <*> Intel Wireless WiFi Next Gen AGN (iwlagn) [*] Intel Wireless WiFi 4965AGN [*] Intel Wireless WiFi 5000AGN; Intel WiFi Link 1000, 6000, and 6050 Series I tried with the other intel drivers enabled as well (iwl3945) and no difference. Is there something stupid I'm missing? Is there something I have to recompile after upgrading the kernel (a la nvidia)? Thanks Mala

  Read the article

• Outlook 2010 on WinXP runs once then refuses to run again until reboot

  - by msorens

  Since I installed Outlook 2010 on a new machine (WinXP Pro SP3) a couple months back I have had an issue that is quite annoying: If I close Outlook then attempt to restart it I get a small pop-up saying only: "Cannot start Microsoft Outlook". I found one workaround, but not a terribly practical one: reboot. If I reboot then launch Outlook, it opens fine. Here is what I know: Since I can run Outlook just fine after a reboot, I do not see that a system restore, an OS reinstall, or the like would help. I tried "outlook.exe /resetnavpane" and "outlook.exe /safe" but those give the same error. There are no entries in the event log. There is no instance of Outlook appearing in the process list once I close the program, so it does not seem to be an alias for "outlook is already running". As far as I have found, my situation is unique among reports of similar incidents: I have uncovered no other reports saying Outlook would run fine the first launch or that a reboot would again allow it to run. Suggestions?

  Read the article

• Boot sequence unlike reboot

  - by samgoody

  When I turn on the computer it acts very differently than when I reboot it. [WinXP Pro, Intel Core2 6600, 2.4GHZ, 2GB RAM, NVIDA GeForce] Boot: Monitor must be plugged into the motherboard or no image. Screen resolution 800x600. Changes to the resolution cause only the top half of the screen to be usable, and are lost when I shut down the computer. Desktop icons arranged in neat rows on left of desktop. Nothing of note in system tray In Device Manger - Display adapter: Intel(R) Q965/Q963 Express Chipset Family In Device Manger - Monitors, two monitors are listed Hibernate and standby work. Reboot: Monitor must be plugged into the graphics card or no image. Screen resolution - 1280x1024 Desktop icons arranged in the cute circle that I put them in. NVIDIA icon shows in system tray. In Device Manger - Display adapter: NVIDA GeForce 6200LE In Device Manger - Monitors, one monitor is listed Hibernate and standby do not work. When awakened after a hibernation it says: The system could not be restarted from its previous location because the restoration image is corrupt. Delete restoration data & proceed to system boot? Double reboot (inconsistent): Monitor must be plugged into the graphics card. Screen resolution - 1024x768 Odd icon shows in system tray whose tooltip says "Intel Graphics" For a while my morning ritual was to boot, wait, reboot using (alt+ctrl+del - ctrl+u - R), wait. Keeping the monitor plugged into the graphics card. But aside for the inefficiency of this method, I sometimes want to standby and can't. On the other hand, the computer is unusable when set to 800x600. Please help, anyone?

  Read the article

• Memory modules not running at rated speeds.

  - by Wesley

  Hi all, I'm having some odd memory issues with my build. Here are my specs right now: QDI Superb 4 motherboard Intel Pentium 4 Northwood 2.4GHz (512KB L2, 533MHz FSB) 3x 256MB PC2100 DDR266 RAM 16MB NVIDIA TNT2 Pro AGP Seagate 80GB IDE HDD Generic USB 2.0 PCI Generic Modem PCI Bestec 250W PSU To be even more specific, here are the current brands and models of each module: Kingston KVR266X64C25/256 Samsung PC2100U-25331-Z SMART SM5643285D4N0CHM0H Supposedly, they are all PC2100 266MHz modules with a latency of 2.5. Looking in Speccy, the Kingston module is somehow running at a speed of PC2300 ~284MHz. I've never overclocked RAM at all as I don't know how to. However, when I first started the computer, I had the SMART module in place first and then reset the BIOS settings, including the integrated overclocking options. However, this still doesn't explain why the Kingston module runs at a higher speed than the SMART and Samsung module. Why is it like this? On a side note, where could I find the motherboard manual for the QDI Superb 4? Thanks in advance.

  Read the article

• Word 2003 will not show up in Windows 7

  - by invadersil

  I just installed Windows 7 over the holiday and it went swimmingly well. Today I finished up a few things like installed MS Office 2003. That went well too, until I tried to open up Word. When I try to open up Word on its own, it comes up in the application bar but the application window does not show. I use Word as the editor in Outlook which does work. I also discovered that I can start it up in safe mode and it will work normally. But normal startup just doesn't show me anything. Oddly, if I start typing stuff while the app is selected in the app bar and then try to close it, it pops up a message asking if I want to save it. I tried running the compatibility utility within Windows 7 but still no dice. Has anybody seen this issue yet? The other Office apps start normally. Edit: More info: Windows 7 Pro 64-bit. Office is patched up to SP3. And last time I checked, there were no updates either (and fully updated with KBs after SP3) And I did a fresh install of Windows 7.

  Read the article

• Window 7 Computer name changing on its own?

  - by DC

  Very odd problem... I have a Dell Latitude D830 with XP Pro that has been running on my local domain for many years. I recently Installed Windows 7 Enterprise on the D830 using a brand new HDD so that I could still use XP if I needed by just swapping out the HDD's. I added the W7 installed system to my domain using a completely different machine name than that used for the XP system and everything seemed to be functioning as it should. On boot up over the last 2 weeks or so I occasionally (3 times now) get to the login screen and try to login to the domain only to get an error saying that the Computer name is not a trusted machine in the domain I'm trying to log in to. Come to find out that the machine name on the W7 system has been changed somehow to that of my old XP system. If on the W7 system I then change the name back to the correct name, disjoin the domain, reboot, add the machine back into the domain … all is well for an unknown period of time until this happens again. This last time, I know for a fact that everything was fine the day before when I shut down the system. I came in today, powered up the system and the machine name had been changed to that of my old XP system again. Has anybody else seen this behavior or hav any ideas on what could be causing it? Thanks!

  Read the article

• USB transfer speed for Windows 7 is incredibly slow to my external drive

  - by Wolfram

  I'm running Windows 7 Pro and am try to backup 116 GB of data to my external 1 TB hard drive. My laptop has only USB 2.0 ports and my hard drive is USB 3.0 compatible, as is the cable I'm using. I understand that the transfer speed should still be in accordance with USB 2.0 speeds. However, right now I'm getting 135 KB/s and it's been gradually dropping. For an earlier transfer, I would get between 4 MB/s to 8 MB/s. So, I'm really just wondering what's going on with my transfer rate and what I can do to improve it. I'm currently about 35 GB into the 116 GB transfer. Another strange thing is that the window which shows the transfer status decided to max out at 835 MB, and therefore shows items remaining as 0. However, it is still performing the rest of the transfer, and I can see it still cycling through files. Now that I think about it, it seems plausible that the speed being shown by the window is calculated merely as total data transferred / time elapsed. Since the "counter" of data, as far as what is being displayed in the window, maxed out at 835 MB, as time increases, the speed shown is going to keep decreasing because the 'total data transferred' value isn't being incremented. So with that in mind, I suppose I don't actually know at what rate the data is being transferred currently. Nonetheless, my best speed earlier was only around 8 MB/s. Shouldn't USB 2.0 deliver closer to 35 MB/s? Also, if someone can tell me why the transfer status window is displaying the incorrect data information and how to fix this, that would also be appreciated.

  Read the article

• PowerPoint 2007 slides are only partially converted to PDF since SP3

  - by Tim Pietzcker

  EDIT: Microsoft support has confirmed that it's a bug with PowerPoint 2007 SP3. I have recently encountered a problem with the "Save as PDF/XPS" add-in for PowerPoint 2007. When I use "Save as PDF/XPS" to create a PDF version of my presentation, some slides are only partially included in the resulting PDF file. For example, this: (download the PPTX file here) is reduced to this (in Adobe Reader X or Acrobat Pro X (both 10.1.1)): (download the PDF file here) So far, I have only encountered this with slides that contain animation elements, but which part of the elements remain in the PDF version appears not to have anything to do with the order in which the animated elements appear, so that might just be a coincidence. Update: The problem persists even if I "un-animate" the slides (removing the animation but leaving the previously animated elements intact). When viewing the affected slides in Acrobat Reader, it sometimes complains about the file containing invalid elements, and that I should complain to whoever generated the PDF file... Update 2: I have just installed Office 2007 on a new Windows 7 x64 PC. With the original Office version (12.0.4518.1014 MSO 12.0.6562.5003), a correct PDF file is generated. After installation of SP3 (12.0.6606.1000 SP3 MSO 12.0.6607.1000) a corrupt PDF file is generated. Today's Microsoft Updates (to PowerPoint version 12.0.6654.5000) haven't changed anything, by the way. Update 3: I have opened a tech support incident with Microsoft. They have confirmed the "limitation", as they called it, and it is indeed limited to 2007 SP 3 only. They are going to pass it on to the developers but they can't say when or even if a fix would be forthcoming, so I guess I'll upgrade to 2010...

  Read the article

• Hibernate between OS X and Bootcamp Win 7

  - by Willem

  Wouldn't it be great if someone wrote a guide or an app which allowed you to switch instantly between OS X and Windows using Hibernate in both OS:s? Windows 7 already has an option "Hibernate" which allows you to boot back to your OS X partition, but OS X does not exactly offer the same. However, there are possibilities here. It seems that the recent Mac's have 3 different kinds of sleeping mode: Sleep: Low power consumption, RAM still active. Legacy Safe Sleep: No power consumption(?), writes RAM to disk and shuts down (is this the same as Hibernate?) Safe Sleep: Writes RAM to disk and enters sleep mode. If battery level drops too low it goes into Hibernate (is this Hibernate the same as #2 in this list? This is the Hibernate I will be referring to int he rest of this post) It seems that I am unable to force my MacBook Pro (Late 2011) OS X 10.7.3 into a true hibernate using either command line or apps that are supposed to do this. I believe the Mac should show that white loading bar whilst waking up if it was truly put into hibernate (which it does not). But I can get this white bar to show by letting my battery level drop to 0% so there is obviously a system function for it (obviously, duh! :). When Win 7 goes into hibernate it shuts down completely and you can then boot into OS X on startup. On OS X however, hibernate forces you to wake up into OS X. Can you hack this so that you're allowed to select boot partition after OS X hibernates? Would it be possible to use the true hibernate system functionalities of Win 7 and OS X to create a kind of instant switching between the two? Imagine this on a quick SATA-3 SSD like my 180GB Intel 520. Thanks / Willem

  Read the article

• How to reproduce the behavior of Mac OS X's dead keys on Windows 7?

  - by Pascal Qyy

  I'm French, but I've chosen to take a QWERTY keyboard for my MacBook Pro for many reasons: first of all, the AZERTY keyboard is not at all ergonomic because it has no numeric keypad, and I must use MAJ or CAPS LOCK to access to the numeric keys ; secondly, I've bought this mac for development ; and chars {, }, etc., are not directly accessible on the Apple AZERTY keyboard the last thing is that: the diacritics are VERY easy to produce on an Apple keyboard with Mac OS X : ? + c for a ç, for example, and many dead keys easy to use (e.g. ? + e, then e give you an é. So, I have no difficulties to write in my native language with this keyboard under Mac OS X. BUT, when I boot on Windows 7's Boot Camp partition, or when I use applications from it through VMware Unity, it is no longer the same comfort! Without numeric keypad, it's impossible to use it for produce specials characters (e.g.: Alt + 0231 for the ç) I've tried many solutions, like auto replacement in Microsoft Office (e.g.: ,,c being replaced by ç), but for all my diacritics, I must type a space, then a back space before the replacement work. I've also tried third party software, as Texter, but it is very buggy and don't work properly (or don't work at all) in many case! So, is there a solution somewhere, to have this Mac OS X's nice and comfortable way of producing diacritics for Windows 7? Thank in advance for your help and your time!

  Read the article

• How can I make WSUS less invasive for our users?

  - by Cypher

  We have WSUS pushing updates out to our user's workstations, and things are going relatively well with one annoying caveat: there seems to be an issue with a pop-up being displayed in front of some users informing them that their machine will be rebooted in 15 minutes, and they have nothing to say about it: This may be because they did not log out the prior night. Nevertheless, this is a bit too much and is very counter-productive for our users. Here is a bit about our environment: Our users are running Windows XP Pro and are part of an Active Directory Domain. WSUS is being applied via Group Policy. Here is a snapshot of the GPO that is enforcing the WSUS rules: Here is how I want WSUS to work (ideally - I'll take whatever can get me close): I want updates to automatically download and install every night. If a user is not logged in, I would like the machine to reboot. If a user is logged in, I would like their machine not to reboot, but instead wait until the next "installation period" where it can perform any other needed installations and reboot then (provided the a user account is not still logged in). If a user is to be prompted for reboot, it should only happen once per day (if possible), but every time they are prompted, they must have a way to postpone the reboot. I do not want users to be forced to restart their computer whenever the computer thinks it should happen (unless it's after an update installation and there are no logged in users). That doesn't seem productive to force a system restart in the midst of a person's workday. Is there something that I can do with the GPO that would help make WSUS less intrusive? Even if it gave the user an option to Restart Later - that would be better than what is happening now.

  Read the article

• Connect trough remote computer connection

  - by Didac

  First, sorry for my english and my poor knowlodge of this subject. I have a dedicated server placed in Germany (windows 2008 R2) and I live in spain. I would like to access internet from my home computer (Windows 7 Pro x64), trough my server in Germany, so I can use a German IP, what I need some times. I have complete acces in to both computers, but I just don't know where to start. (My knwoledge is limited to software development :/ ) I'd like to know where to start, if I need to create a VPN and so.. Thanks in advance! Update 1 I tried a lot of options of OpenVPN, but I sadly I know nothing abuot networking, so I have to accept I do not know what I'm doing :( Here are my config files (note most of the options are from the sample config files). server.conf #server config file start port 1194 proto udp dev tun server 10.0.0.0 255.255.255.224 #you may choose any subnet. 10.0.0.x is used for this example. ca "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\server.crt" key "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\server.key" dh "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\dh1024.pem" push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" #the following commands are optional keepalive 10 120 comp-lzo persist-key persist-tun verb 5 #config file ends client.conf #client config file start client dev tun proto udp remote 176.9.99.180 1194 resolv-retry infinite nobind persist-key persist-tun ca "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\ca.crt" cert "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\client1.crt" key "C:\\Program Files (x86)\\OpenVPN\\easy-rsa\\keys\\client1.key" ns-cert-type server comp-lzo verb 5 explicit-exit-notify 2 ping 10 ping-restart 60 route-method exe route-delay 2 # end of client config file And here's the server's network settings: IP address: 176.9.99.180 Subnet mask: 255.255.255.224 Default gateway: 176.9.99.161 Preferred DNS server: 127.0.0.1

  Read the article

• No Microsoft Security Essentials for Windows 8. So, how to access similar Defender features/settings?

  - by Chris W. Rea

  I just installed Windows 8 Pro. One of the first things I went to do is install Microsoft Security Essentials, thinking I still needed add-on security software, but I've learned here that it isn't required for Windows 8. Witness: Got Windows 8 or Windows RT? Windows Defender for Windows 8 and Windows RT provides the same level of protection against malware as Microsoft Security Essentials. You can't use Microsoft Security Essentials with Windows 8, but you don't need to — Windows Defender is already included and ready to go. [...] All well and good. However, on Windows 7, once you installed Microsoft Security Essentials, you got a tray icon, and from there you could access the features of MSE, such as perform custom scans, turn off real-time protection (temporarily, of course), check for updates, etc. However, Defender on Windows 8 doesn't display a tray icon – and yes, I've already made sure I'm displaying all icons in the notification area. So, how to access the similar specific features of Windows Defender on Windows 8?

  Read the article

• CUPS printer on Vritual Machine can be access via CUPS admin, but not by XP?

  - by SJaguar13

  I have a Zebra label printer connected to a Linux Mint virtual machine. It was set up with CUPS and a Windows XP computer can then print to it via http://192.168.1.76:632/printers/labelprinter. That was all fine and dandy I then hooked up a Fargo Pro L PVC card printer to a Windows XP virtual machine. I had to disconnect the label printer as the server that hosted both virtual machines only has 1 parallel port. Now I plugged in the Zebra again, and it cannot print from the Windows XP computer anymore. If I go to the CUPS admin panel on the Windows XP computer, I can see it, everything looks fine, and I can send it a test page to print which works. If I try to print from Windows, I get an error that the printer is not found/cannot connect to the server. The only other thing that changed was the firewall on the router to allow remote desktop to another computer from outside the network, but all the firewall stuff was for external use. Nothing affected the IP address of the internal network. The Linux Mint VM also had a PDF pritner that was shared with CUPS. That printer is also down. I tried setting up a new CUPS installation on another VM, and when I go to share it with XP, I get the same error. I don't know what to try. It has access, it can get to the admin from that computer, it seems to be up and ready, but when Windows tries to connect, the printer isn't found even though 4 days ago everything was fine. Any ideas?

  Read the article

• Best usage for a laptop being used as a desktop without removable batteries

  - by Senseful

  After reading the information on http://batteryuniversity.com, I realize that one of the best ways to permanently damage a lithium ion battery is to use the battery at a high temperature while it's fully charged. This is exactly what happens when you use the computer as if it were a desktop computer, since leaving it plugged in will keep the battery at 100% and using the computer will heat up the battery. This is why it's recommend to remove the battery from your laptop if you are using it is this scenario. My question is what would you do if the laptop doesn't have removable batteries (e.g. a MacBook Pro)? Should I use some kind of charge cycle such as: charge to 80%, unplug the power chord, use the laptop until it reaches 20%, then repeat the cycle by charging to 80% again? If so, which values should I use instead of 80% and 20%? (I think charging to 80% is better than 100% because of the damage that a hot battery at 100% can do, but I just made the figure 80% up, and I'm sure there's a better number to strive for which is backed by science.) I've read many of the articles on batteryuniversity.com, but couldn't find anything pertaining to this. Update: What about doing something like charge (or discharge) it to 50%, then plug it in and turn on settings which use the battery as much as possible (e.g. brightness all the way up, wi-fi on, etc.), in order to try to maintain the battery at 50% (i.e. the rate it is charging is the same as it is discharging). This will probably heat up the battery, but would make it so you don't need to constantly plug and unplug the laptop. The one bad thing is that you are taking up more charge cycles which would decrease the battery life, thus I'm not sure this is a good idea.

  Read the article

• Un-install network printer drivers from Win7 64 Home Premium

  - by AkkA

  I recently bought a NAS device that has print server functionality through USB. The printer was already installed and fully working on another Win XP box, set up that box to see the printer over the network and it prints fine. I tried to install the printer on my Win7 laptop (64 bit, Home Premium), but got the wrong drivers somehow, or it just refuses to work. I need to completely un-install the printer drivers and start from scratch. Removing the printer (by going to the printers folder, right click and remove) does not actually un-install the drivers. It only removes the printer from active use. Even if I try to re-install new drivers it will load the old ones. I have read a few things on the net that say to load up a device snap-in or something of the sort into Computer Management, but this seems to be valid for Win7 Pro or greater, the function everyone tells you to use isnt available in Home Premium. Is there anything I can use to manage device driver files in Home Premium? I want to completely remove them from the computer.

  Read the article

• Outlook / Gmail 'too many simultaneous connections' error

  - by sam

  I'm just setting up Outlook for Mac, and I'm trying to add a Google Apps application for business email (Gmail). I've set it up correctly (same details worked in Mac mail). But I keep getting two errors, either or just a error asking for the username and password again. Just to confirm the user name and password are correct, although when I go into menu command Tools - Account and look in the password field for that account it's blank. But if I just click cancel on the popup asking for my username password it just continues to get mail in the background for about 30 seconds, before again asking again for the password, or showing the above error which I can click 'yes' to and again it will get the mail. But after 30 seconds it does the same thing. I've got two other accounts set up fine, one a horde account (hosted webmail using POP3) and the other a iCloud .me account running on IMAP. What might be causing this and how I can remedy it? A bit more background: the machine is a MacBook Pro running Mac OS X v10.7 (Lion). Update 2013-11-02 I've updated Outlook to SP3, but I still get the same error.

  Read the article

• How should a small company administer their web server?

  - by John Isaacks

  We currently have our website hosted by a small company that is actually a reseller for Rackspace. They act as our server administrators. They configured the servers, handle the backups, if there is a problem, we call them and they fix it. We are growing and want to move away from our shared server to either a cloud or dedicated server. I am thinking cloud myself but I am open to either. The current company doesn't seem to want to offer us anything more than a shared hosting plan. I looked into cloud solutions at vps.net, with them I would have to be the server administrator myself. I am the website programmer but administering the server is outside my comfort zone. vps.net does have a $99/month plan for Pro-Active Managed Support but I am not sure if this is the equivalent on a server admin that is there when you need them. We could hire someone in house, but I think that would be overkill for our needs. I am not exactly sure what we need, I do know we need as close to 100% uptime as we possible can. and we need the ability to add/remove/change the server configuration/software/etc. when needed (though changes shouldn't be very often once everything is setup right). Can someone point me in the right direction? What do other companies do?

  Read the article

• Configure a Windows PC as network appliance w/o monitor, keyboard and mouse

  - by Joshua Lim

  I intend to use a small form factor PC with Windows 7 Professional installed as a network appliance attached directly to my customer's LAN without connecting a monitor, keyboard or mouse. How should I configure the networking for my PC so that I can access it via say my laptop? I figure that I can do it 2 ways. Attach my laptop to the PC using a crossover cable? Connect via RDP and configure networking. Configure an IP address on the PC before I deliver it to the customer place. At the customer's place, attach the PC to LAN and connect to the IP address which I previously configured from my laptop or from one of the customer's workstations. I know the first way is doable, but is the second way possible? I'm sorry if this question sounds ridiculous - I am Delphi programmer but a novice on networking. Finally, if possible, I hope to make the configuration process web based as I wouldn't like to reveal the fact that I am using Win7 Pro for the network appliance!

  Read the article

• How can I backup entire installations of a program, instead of just manually backing up individual f

  - by NoCatharsis

  It seems pretty straightforward to backup individual files, such as pictures, saved games, or settings files - just copy them straight over to your 2nd HDD or to an online service like DropBox. However, is there any way to backup entire installations of a program? For instance, my Firefox directory has a lot of personal customizations and add-ons. I don't want to go through each item and decide to back it up or let it go. So my next option is to copy out the entire directory for backup. But, if I copy the entire directory back onto the HD after a format, it is not an integrated installation and this seems like it could be troublesome. I would assume Windows cannot detect the directory for uninstallation, or would not let you choose Firefox as your default browser, right? I'm no pro, but this sounds like a bad idea. So my question is whether there is a good way to preserve all necessary files, while also preserving the full installation process of an application. This is not specific to Firefox - I would like to know how to do this for any application. Thank you.

  Read the article

• Performance tweaks and upgrades for VMWare Server 2

  - by sjohnston

  Our software department has a server running VMWare Server 2. We typically have 8-10 VMs running as test environments (Win XP and Server 08) for various versions of our software, and one VM that is used as a build server (Win XP). The host is running Server 2003 R2. It has 32GB RAM, 8 core Xeon 3.16GHz CPU, one disk for host OS and two raid disks for VMs. The majority of the time, this setup behaves very well and there are no complaints. Other times, the VMs can be very laggy. This is sometimes, but not always, correlated to heavy load on the build server. I'm a software developer, not an IT pro, but it seems to me that this machine should be beefy enough to handle this many VMs. Is this occasional performance hit likely just because we're hitting the limits of the hardware, or should I be looking for another culprit? From what I've read, I'm guessing if there's a bottleneck, it's probably disk I/O with all these VMs running off two disks (especially the build server). Would spreading the VMs over more disks, and/or switching to SSDs give us a significant performance boost? Other things I've read may increase performance: single virtual processor per VM removing/disabling unused virtual hardware preallocated disk space not using snapshots setting a reserved memory limit on the host and disabling VM memory swapping Can anyone confirm or deny if any of these improve performance? What other good tweaks have I missed?

  Read the article

• AGP 4x slot running at 2x

  - by Wesley

  Hi all, Here are the specs of the machine related to this question: AMD Athlon XP 2400+ @ 2 GHz / 2x 512MB PC3200 DDR RAM / 3D Fuzion 128MB GeForce 6200 AGP / WD 160GB IDE HDD / FIC AM37 (mobo) / Codegen 350W PSU / Windows XP Pro SP3 So, for some odd reason, the GeForce 6200 that is in the AGP 4x slot is not running at 4x, but 2x. The card itself supports AGP 4x and even 8x. When I enter the BIOS, the options for the AGP slot only allow 2x as the max. Before, the max option for the AGP slot in the BIOS was 4x. (I do get the 4x option after I reset CMOS, but it does not stick after a restart.) I don't exactly know what the problem could be, but a few weeks ago, this machine's hard drive was reformatted and got a fresh install of XP. Also, I did install Rivatuner, but I never overclocked it at all. (I uninstalled it after thinking that it had done something.) Otherwise, I cannot figure out the cause of the problem. Does anybody have an idea why this is happening? (Would I have to do another reformat?) Thanks in advance. PS: the other options for the AGP slot are aperture size (which I tried changing, but it did nothing) and FastWrite (enabled by default).

  Read the article

• Desktop appliciations are unable to launch my browser in Windows 8

  - by Chevex

  I have a fresh copy of Windows 8 Pro installed from MSDN. I have Google Chrome installed (stable channel) and it is set as my default browser. I even went into Control Panel Default Programs to ensure that Chrome had all its defaults. When other desktop applications try to launch my browser they always fail. For example, while trying to install the Android SDK for Windows the installer accurately detected that I did not have the JDK installed. It provides a friendly button to visit java.oracle.com. When pressing this button, nothing happens at all. You can see that here: http://youtu.be/XXL8GhuWWg0 If it were only that application that was having issues I wouldn't think anything of it but I have been encountering similar issues all over the place. Probably the most irritating one is when visual studio has updates; clicking the update button does nothing. http://www.youtube.com/watch?v=zwd1mn3TId0 You can see in that screencast that Visual Studio is not able to launch the browser no matter what I click. The update button doesn't do anything and neither do the two links in the update's description. Any suggestions? I'm assuming it's a Windows issue since it is happening in multiple applications. UPDATE: Setting IE as the default browser fixes the issue. So it has something to do with it not being able to launch Chrome programmatically. Is it even possible to workaround this bug or do I have to suffer with IE as default for now?

  Read the article

• Computer crashes if left unattended AND running uTorrent, what could be?

  - by DiegoDD

  I have a weird problem in which, if I leave my computer unattended, AND I leave uTorrent open, downloading/seeding, the computer simply crashes after about 20 / 30 minutes (don't know exactly since if I leave it, and come back later, it has already restarted or has a BSOD.) If I leave the computer alone for undefined time WITHOUT uTorrent, nothing happens, and if I am constantly using the computer while using uTorrent, no problem either (I could be using it all day with uT open and it doesn't crash). So what could it be that the combination of those cases makes the computer crash? I have already checked the power management so the computer never enters stand by mode, sleep, hibernate, etc. (the only thing I do is turn off the display). A first guess is that maybe one of my external hard drives DO sleep or enters in a "low power" mode or something if I don't use the PC. but since uT is running MAYBE tries to use that drive, and makes it crash. Could that be possible? How to know for sure if the external drive does that, and to prevent it from doing so. Any more ideas of what may be causing that? Specs: Windows 7 Pro, 64-bit, 2 GB RAM. Latest version of uTorrent (although it has been happening for a while now). UPDATE: i just found out that uTorrent has Disk cache options ( preferences - advanced - disk cache ). I have no idea if that may be causing problems with my external drive, hence causing the crash.

  Read the article

• Over gigabit connection, Teracopy does 31MB/s, but Windows 8 does it at ~109MB per second?

  - by Gaurang

  I got my brain-melting first taste of Gigabit networking today, between my 2011 MacMini and Windows 8 Pro desktop connected via Cat.5e to Linksys WRT320N(sporting dd-WRT). After making sure that the line speed on both systems showed 1Gbps, I proceeded to copying a 2.4GB MP4 from the Mini to the Win 8 desktop (SMB sharing). Although satisfied with the 30-34 MB/s that Teracopy was showing (that was a proper step-up for me from 10 MB/s), I still was curious about this massive difference in the advertised and real-world speed. 2 hours of Google had me believing that there were other factors that resulted in less speed, SMB being one. So just for the sake of doing it, I iPerf'd both the systems and guess what that showed - around 875mbps on both systems! I then stumbled upon this little piece of info after which I turned off Teracopy and copied the same file through Windows 8's regular copier. 109 MB/s. Molten brains :) What exactly is causing this? And can I enable such speeds via Teracopy? I really dig the extra features that Teracopy has, will surely miss them now :D

  Read the article

< Previous Page | 352 353 354 355 356 357 358 359 360 361 362 363  | Next Page >