Search Results

Search found 9627 results on 386 pages for 'active ftp'.

Page 357/386 | < Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >

  • Silverlight 4 WCF RIA Services and MVVM is not as simple

    - by Thomas Jaskula
    [Disclaimer: I'm ASP.NET MVC Developer] Hi, I'm looking for some best practices with implementing MVVM pattern with WCF RIA in Silverlight 4. I'm not looking to use MEF of IoC for locating my ViewModels. What I would like to know is how to apply MVVM pattern with Silverlight 4 and WCF RIA. I don't want to use other stuff like Prism or MVVM Light toolkit. I found many examples on Internet showing how it is wonderful to drag and drop a datasource on the view and the job is done (it reminds me about my first VB6 developments). I tried to implement MVVM with WCF RIA and it's not strightforward at all. If I understand, the MVVM should contain all the logic in order to unit test it in isolation but when it comes to combine it with WCF RIA it's another story. I have the following questions. Can I use a generated metadata as model ? It would be easier to use it that if I write all from the scratch. As I saw the only way I could get data is through DomainContext or through direct binding in the view (local ressource). I don't want the direct binding in the view, not testable at all. On the other hand I can't use DomainContext, it doesn't expose any single entity !!! All I have is the EntitySet that I can bind to datagrid. How do I bind a single Entity to the DataForm from the ViewModel ? How do I udpate the model to the database ? How do I navigate from one Entity to a collection of it's itemps. For example if I have a Company Entity I would like to show a DataFrom to update a entite informations and a datagrid to show companies adresses. When saving a form would like to save information to Company and for example an information avout which adress was selected as active. Please help me understand how to do it well. Or maybe I should drop the WCF RIA and to do it with WCF from scratch ? What do you think ?

    Read the article

  • Can't connect to local IP address on OSX

    - by Alex Worden
    I'm trying to connect to a webserver that's running on my mac OSX 1.6. I'm able to connect to it locally using http://127.0.0.1:8888/myapp but when I attempt to connect to it using my machine's local IP address (http://192.168.1.15:8888/myapp IP shown below) from the same machine (or another on the network) I cannot connect. I can ping the LAN IP address. I've tried adding IP forwarding to my router for port 8888 but it didn't help. I've checked and the OSX firewall is disabled Can anyone suggest what else is blocking the connection? Here's what I get when I run ifconfig: ~ :ifconfig lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:1f:5b:e8:16:4d media: autoselect status: inactive supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::21e:c2ff:febf:4809%en1 prefixlen 64 scopeid 0x5 inet 192.168.1.15 netmask 0xffffff00 broadcast 192.168.1.255 ether 00:1e:c2:bf:48:09 media: autoselect status: active supported media: autoselect fw0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 4078 lladdr 00:1f:5b:ff:fe:2b:b3:3c media: autoselect <full-duplex> status: inactive supported media: autoselect <full-duplex> en5: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500 ether 00:1e:c2:8e:0f:45 media: autoselect status: inactive supported media: none autoselect 10baseT/UTP <half-duplex> en2: flags=8922<BROADCAST,SMART,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:1c:42:00:00:00 media: autoselect status: inactive supported media: autoselect en3: flags=8922<BROADCAST,SMART,PROMISC,SIMPLEX,MULTICAST> mtu 1500 ether 00:1c:42:00:00:01 media: autoselect status: inactive supported media: autoselect

    Read the article

  • Help with Nicedit - removeFormat function

    - by Franck
    Hello, I'm trying to get around Nicedit, and especially the "removeFormat" function. The problem is I cannot find the "removeFormat" method source code in the code below. The JS syntax looks strange to me. Can someone help me ? /* NicEdit - Micro Inline WYSIWYG * Copyright 2007-2008 Brian Kirchoff * * NicEdit is distributed under the terms of the MIT license * For more information visit http://nicedit.com/ * Do not remove this copyright message */ var bkExtend = function(){ var A = arguments; if (A.length == 1) { A = [this, A[0]] } for (var B in A[1]) { A[0][B] = A[1][B] } return A[0] }; function bkClass(){ } bkClass.prototype.construct = function(){ }; bkClass.extend = function(C){ var A = function(){ if (arguments[0] !== bkClass) { return this.construct.apply(this, arguments) } }; var B = new this(bkClass); bkExtend(B, C); A.prototype = B; A.extend = this.extend; return A }; var bkElement = bkClass.extend({ construct: function(B, A){ if (typeof(B) == "string") { B = (A || document).createElement(B) } B = $BK(B); return B }, appendTo: function(A){ A.appendChild(this); return this }, appendBefore: function(A){ A.parentNode.insertBefore(this, A); return this }, addEvent: function(B, A){ bkLib.addEvent(this, B, A); return this }, setContent: function(A){ this.innerHTML = A; return this }, pos: function(){ var C = curtop = 0; var B = obj = this; if (obj.offsetParent) { do { C += obj.offsetLeft; curtop += obj.offsetTop } while (obj = obj.offsetParent) } var A = (!window.opera) ? parseInt(this.getStyle("border-width") || this.style.border) || 0 : 0; return [C + A, curtop + A + this.offsetHeight] }, noSelect: function(){ bkLib.noSelect(this); return this }, parentTag: function(A){ var B = this; do { if (B && B.nodeName && B.nodeName.toUpperCase() == A) { return B } B = B.parentNode } while (B); return false }, hasClass: function(A){ return this.className.match(new RegExp("(\s|^)nicEdit-" + A + "(\s|$)")) }, addClass: function(A){ if (!this.hasClass(A)) { this.className += " nicEdit-" + A } return this }, removeClass: function(A){ if (this.hasClass(A)) { this.className = this.className.replace(new RegExp("(\s|^)nicEdit-" + A + "(\s|$)"), " ") } return this }, setStyle: function(A){ var B = this.style; for (var C in A) { switch (C) { case "float": B.cssFloat = B.styleFloat = A[C]; break; case "opacity": B.opacity = A[C]; B.filter = "alpha(opacity=" + Math.round(A[C] * 100) + ")"; break; case "className": this.className = A[C]; break; default: B[C] = A[C] } } return this }, getStyle: function(A, C){ var B = (!C) ? document.defaultView : C; if (this.nodeType == 1) { return (B && B.getComputedStyle) ? B.getComputedStyle(this, null).getPropertyValue(A) : this.currentStyle[bkLib.camelize(A)] } }, remove: function(){ this.parentNode.removeChild(this); return this }, setAttributes: function(A){ for (var B in A) { this[B] = A[B] } return this } }); var bkLib = { isMSIE: (navigator.appVersion.indexOf("MSIE") != -1), addEvent: function(C, B, A){ (C.addEventListener) ? C.addEventListener(B, A, false) : C.attachEvent("on" + B, A) }, toArray: function(C){ var B = C.length, A = new Array(B); while (B--) { A[B] = C[B] } return A }, noSelect: function(B){ if (B.setAttribute && B.nodeName.toLowerCase() != "input" && B.nodeName.toLowerCase() != "textarea") { B.setAttribute("unselectable", "on") } for (var A = 0; A < B.childNodes.length; A++) { bkLib.noSelect(B.childNodes[A]) } }, camelize: function(A){ return A.replace(/-(.)/g, function(B, C){ return C.toUpperCase() }) }, inArray: function(A, B){ return (bkLib.search(A, B) != null) }, search: function(A, C){ for (var B = 0; B < A.length; B++) { if (A[B] == C) { return B } } return null }, cancelEvent: function(A){ A = A || window.event; if (A.preventDefault && A.stopPropagation) { A.preventDefault(); A.stopPropagation() } return false }, domLoad: [], domLoaded: function(){ if (arguments.callee.done) { return } arguments.callee.done = true; for (i = 0; i < bkLib.domLoad.length; i++) { bkLib.domLoadi } }, onDomLoaded: function(A){ this.domLoad.push(A); if (document.addEventListener) { document.addEventListener("DOMContentLoaded", bkLib.domLoaded, null) } else { if (bkLib.isMSIE) { document.write(".nicEdit-main p { margin: 0; }<\/script"); $BK("__ie_onload").onreadystatechange = function(){ if (this.readyState == "complete") { bkLib.domLoaded() } } } } window.onload = bkLib.domLoaded } }; function $BK(A){ if (typeof(A) == "string") { A = document.getElementById(A) } return (A && !A.appendTo) ? bkExtend(A, bkElement.prototype) : A } var bkEvent = { addEvent: function(A, B){ if (B) { this.eventList = this.eventList || {}; this.eventList[A] = this.eventList[A] || []; this.eventList[A].push(B) } return this }, fireEvent: function(){ var A = bkLib.toArray(arguments), C = A.shift(); if (this.eventList && this.eventList[C]) { for (var B = 0; B < this.eventList[C].length; B++) { this.eventList[C][B].apply(this, A) } } } }; function __(A){ return A } Function.prototype.closure = function(){ var A = this, B = bkLib.toArray(arguments), C = B.shift(); return function(){ if (typeof(bkLib) != "undefined") { return A.apply(C, B.concat(bkLib.toArray(arguments))) } } }; Function.prototype.closureListener = function(){ var A = this, C = bkLib.toArray(arguments), B = C.shift(); return function(E){ E = E || window.event; if (E.target) { var D = E.target } else { var D = E.srcElement } return A.apply(B, [E, D].concat(C)) } }; var nicEditorConfig = bkClass.extend({ buttons: { 'bold': { name: _('Mettre en gras'), command: 'Bold', tags: ['B', 'STRONG'], css: { 'font-weight': 'bold' }, key: 'b' }, 'italic': { name: _('Mettre en italique'), command: 'Italic', tags: ['EM', 'I'], css: { 'font-style': 'italic' }, key: 'i' }, 'underline': { name: _('Souligner'), command: 'Underline', tags: ['U'], css: { 'text-decoration': 'underline' }, key: 'u' }, 'left': { name: _('Aligné à gauche'), command: 'justifyleft', noActive: true }, 'center': { name: _('Centré'), command: 'justifycenter', noActive: true }, 'right': { name: _('Aligné à droite'), command: 'justifyright', noActive: true }, 'justify': { name: _('Justifié'), command: 'justifyfull', noActive: true }, 'ol': { name: _('Liste non ordonnée'), command: 'insertorderedlist', tags: ['OL'] }, 'ul': { name: _('Liste non ordonnée'), command: 'insertunorderedlist', tags: ['UL'] }, 'subscript': { name: _('Placer en indice'), command: 'subscript', tags: ['SUB'] }, 'superscript': { name: _('Placer en exposant'), command: 'superscript', tags: ['SUP'] }, 'strikethrough': { name: _('Barrer le texte'), command: 'strikeThrough', css: { 'text-decoration': 'line-through' } }, 'removeformat': { name: _('Supprimer la mise en forme'), command: 'removeformat', noActive: true }, 'indent': { name: _('Indenter'), command: 'indent', noActive: true }, 'outdent': { name: _('Remove Indent'), command: 'outdent', noActive: true }, 'hr': { name: _('Ligne horizontale'), command: 'insertHorizontalRule', noActive: true } }, iconsPath: 'http://js.nicedit.com/nicEditIcons-latest.gif', buttonList: ['save', 'bold', 'italic', 'underline', 'left', 'center', 'right', 'justify', 'ol', 'ul', 'fontSize', 'fontFamily', 'fontFormat', 'indent', 'outdent', 'image', 'upload', 'link', 'unlink', 'forecolor', 'bgcolor'], iconList: { "xhtml": 1, "bgcolor": 2, "forecolor": 3, "bold": 4, "center": 5, "hr": 6, "indent": 7, "italic": 8, "justify": 9, "left": 10, "ol": 11, "outdent": 12, "removeformat": 13, "right": 14, "save": 25, "strikethrough": 16, "subscript": 17, "superscript": 18, "ul": 19, "underline": 20, "image": 21, "link": 22, "unlink": 23, "close": 24, "arrow": 26, "upload": 27, "question":2 } }); ; var nicEditors = { nicPlugins: [], editors: [], registerPlugin: function(B, A){ this.nicPlugins.push({ p: B, o: A }) }, allTextAreas: function(C){ var A = document.getElementsByTagName("textarea"); for (var B = 0; B < A.length; B++) { nicEditors.editors.push(new nicEditor(C).panelInstance(A[B])) } return nicEditors.editors }, findEditor: function(C){ var B = nicEditors.editors; for (var A = 0; A < B.length; A++) { if (B[A].instanceById(C)) { return B[A].instanceById(C) } } } }; var nicEditor = bkClass.extend({ construct: function(C){ this.options = new nicEditorConfig(); bkExtend(this.options, C); this.nicInstances = new Array(); this.loadedPlugins = new Array(); var A = nicEditors.nicPlugins; for (var B = 0; B < A.length; B++) { this.loadedPlugins.push(new A[B].p(this, A[B].o)) } nicEditors.editors.push(this); bkLib.addEvent(document.body, "mousedown", this.selectCheck.closureListener(this)) }, panelInstance: function(B, C){ B = this.checkReplace($BK(B)); var A = new bkElement("DIV").setStyle({ width: (parseInt(B.getStyle("width")) || B.clientWidth) + "px" }).appendBefore(B); this.setPanel(A); return this.addInstance(B, C) }, checkReplace: function(B){ var A = nicEditors.findEditor(B); if (A) { A.removeInstance(B); A.removePanel() } return B }, addInstance: function(B, C){ B = this.checkReplace($BK(B)); if (B.contentEditable || !!window.opera) { var A = new nicEditorInstance(B, C, this) } else { var A = new nicEditorIFrameInstance(B, C, this) } this.nicInstances.push(A); return this }, removeInstance: function(C){ C = $BK(C); var B = this.nicInstances; for (var A = 0; A < B.length; A++) { if (B[A].e == C) { B[A].remove(); this.nicInstances.splice(A, 1) } } }, removePanel: function(A){ if (this.nicPanel) { this.nicPanel.remove(); this.nicPanel = null } }, instanceById: function(C){ C = $BK(C); var B = this.nicInstances; for (var A = 0; A < B.length; A++) { if (B[A].e == C) { return B[A] } } }, setPanel: function(A){ this.nicPanel = new nicEditorPanel($BK(A), this.options, this); this.fireEvent("panel", this.nicPanel); return this }, nicCommand: function(B, A){ if (this.selectedInstance) { this.selectedInstance.nicCommand(B, A) } }, getIcon: function(D, A){ var C = this.options.iconList[D]; var B = (A.iconFiles) ? A.iconFiles[D] : ""; return { backgroundImage: "url('" + ((C) ? this.options.iconsPath : B) + "')", backgroundPosition: ((C) ? ((C - 1) * -18) : 0) + "px 0px" } }, selectCheck: function(C, A){ var B = false; do { if (A.className && A.className.indexOf("nicEdit") != -1) { return false } } while (A = A.parentNode); this.fireEvent("blur", this.selectedInstance, A); this.lastSelectedInstance = this.selectedInstance; this.selectedInstance = null; return false } }); nicEditor = nicEditor.extend(bkEvent); var nicEditorInstance = bkClass.extend({ isSelected: false, construct: function(G, D, C){ this.ne = C; this.elm = this.e = G; this.options = D || {}; newX = parseInt(G.getStyle("width")) || G.clientWidth; newY = parseInt(G.getStyle("height")) || G.clientHeight; this.initialHeight = newY - 8; var H = (G.nodeName.toLowerCase() == "textarea"); if (H || this.options.hasPanel) { var B = (bkLib.isMSIE && !((typeof document.body.style.maxHeight != "undefined") && document.compatMode == "CSS1Compat")); var E = { width: newX + "px", border: "1px solid #ccc", borderTop: 0, overflowY: "auto", overflowX: "hidden" }; E[(B) ? "height" : "maxHeight"] = (this.ne.options.maxHeight) ? this.ne.options.maxHeight + "px" : null; this.editorContain = new bkElement("DIV").setStyle(E).appendBefore(G); var A = new bkElement("DIV").setStyle({ width: (newX - 8) + "px", margin: "4px", minHeight: newY + "px" }).addClass("main").appendTo(this.editorContain); G.setStyle({ display: "none" }); A.innerHTML = G.innerHTML; if (H) { A.setContent(G.value); this.copyElm = G; var F = G.parentTag("FORM"); if (F) { bkLib.addEvent(F, "submit", this.saveContent.closure(this)) } } A.setStyle((B) ? { height: newY + "px" } : { overflow: "hidden" }); this.elm = A } this.ne.addEvent("blur", this.blur.closure(this)); this.init(); this.blur() }, init: function(){ this.elm.setAttribute("contentEditable", "true"); if (this.getContent() == "") { this.setContent("") } this.instanceDoc = document.defaultView; this.elm.addEvent("mousedown", this.selected.closureListener(this)).addEvent("keypress", this.keyDown.closureListener(this)).addEvent("focus", this.selected.closure(this)).addEvent("blur", this.blur.closure(this)).addEvent("keyup", this.selected.closure(this)); this.elm.addEvent("resizestart",function(){return false}); this.elm.addEvent("dragstart",function(){return false}); this.ne.fireEvent("add", this); }, remove: function(){ this.saveContent(); if (this.copyElm || this.options.hasPanel) { this.editorContain.remove(); this.e.setStyle({ display: "block" }); this.ne.removePanel() } this.disable(); this.ne.fireEvent("remove", this) }, disable: function(){ this.elm.setAttribute("contentEditable", "false") }, getSel: function(){ return (window.getSelection) ? window.getSelection() : document.selection }, getRng: function(){ var A = this.getSel(); if (!A) { return null } return (A.rangeCount 0) ? A.getRangeAt(0) : A.createRange() }, selRng: function(A, B){ if (window.getSelection) { B.removeAllRanges(); B.addRange(A) } else { A.select() } }, selElm: function(){ var C = this.getRng(); if (C.startContainer) { var D = C.startContainer; if (C.cloneContents().childNodes.length == 1) { for (var B = 0; B < D.childNodes.length; B++) { var A = D.childNodes[B].ownerDocument.createRange(); A.selectNode(D.childNodes[B]); if (C.compareBoundaryPoints(Range.START_TO_START, A) != 1 && C.compareBoundaryPoints(Range.END_TO_END, A) != -1) { return $BK(D.childNodes[B]) } } } return $BK(D) } else { return $BK((this.getSel().type == "Control") ? C.item(0) : C.parentElement()) } }, saveRng: function(){ this.savedRange = this.getRng(); this.savedSel = this.getSel() }, restoreRng: function(){ if (this.savedRange) { this.selRng(this.savedRange, this.savedSel) } }, keyDown: function(B, A){ if (B.ctrlKey) { this.ne.fireEvent("key", this, B) } }, selected: function(C, A){ if (!A) { A = this.selElm() } if (!C.ctrlKey) { var B = this.ne.selectedInstance; if (B != this) { if (B) { this.ne.fireEvent("blur", B, A) } this.ne.selectedInstance = this; this.ne.fireEvent("focus", B, A) } this.ne.fireEvent("selected", B, A); this.isFocused = true; this.elm.addClass("selected") } return false }, blur: function(){ this.isFocused = false; this.elm.removeClass("selected") }, saveContent: function(){ if (this.copyElm || this.options.hasPanel) { this.ne.fireEvent("save", this); (this.copyElm) ? this.copyElm.value = this.getContent() : this.e.innerHTML = this.getContent() } }, getElm: function(){ return this.elm }, getContent: function(){ this.content = this.getElm().innerHTML; this.ne.fireEvent("get", this); return this.content }, setContent: function(A){ this.content = A; this.ne.fireEvent("set", this); this.elm.innerHTML = this.content }, nicCommand: function(B, A){ document.execCommand(B, false, A) } }); var nicEditorIFrameInstance = nicEditorInstance.extend({ savedStyles: [], init: function(){ var B = this.elm.innerHTML.replace(/^\s+|\s+$/g, ""); this.elm.innerHTML = ""; (!B) ? B = "" : B; this.initialContent = B; this.elmFrame = new bkElement("iframe").setAttributes({ src: "javascript:;", frameBorder: 0, allowTransparency: "true", scrolling: "no" }).setStyle({ height: "100px", width: "100%" }).addClass("frame").appendTo(this.elm); if (this.copyElm) { this.elmFrame.setStyle({ width: (this.elm.offsetWidth - 4) + "px" }) } var A = ["font-size", "font-family", "font-weight", "color"]; for (itm in A) { this.savedStyles[bkLib.camelize(itm)] = this.elm.getStyle(itm) } setTimeout(this.initFrame.closure(this), 50) }, disable: function(){ this.elm.innerHTML = this.getContent() }, initFrame: function(){ var B = $BK(this.elmFrame.contentWindow.document); B.designMode = "on"; B.open(); var A = this.ne.options.externalCSS; B.write("" + ((A) ? '' : "") + '' + this.initialContent + ""); B.close(); this.frameDoc = B; this.frameWin = $BK(this.elmFrame.contentWindow); this.frameContent = $BK(this.frameWin.document.body).setStyle(this.savedStyles); this.instanceDoc = this.frameWin.document.defaultView; this.heightUpdate(); this.frameDoc.addEvent("mousedown", this.selected.closureListener(this)).addEvent("keyup", this.heightUpdate.closureListener(this)).addEvent("keydown", this.keyDown.closureListener(this)).addEvent("keyup", this.selected.closure(this)); this.ne.fireEvent("add", this) }, getElm: function(){ return this.frameContent }, setContent: function(A){ this.content = A; this.ne.fireEvent("set", this); this.frameContent.innerHTML = this.content; this.heightUpdate() }, getSel: function(){ return (this.frameWin) ? this.frameWin.getSelection() : this.frameDoc.selection }, heightUpdate: function(){ this.elmFrame.style.height = Math.max(this.frameContent.offsetHeight, this.initialHeight) + "px" }, nicCommand: function(B, A){ this.frameDoc.execCommand(B, false, A); setTimeout(this.heightUpdate.closure(this), 100) } }); var nicEditorPanel = bkClass.extend({ construct: function(E, B, A){ this.elm = E; this.options = B; this.ne = A; this.panelButtons = new Array(); this.buttonList = bkExtend([], this.ne.options.buttonList); this.panelContain = new bkElement("DIV").setStyle({ overflow: "hidden", width: "100%", border: "1px solid #cccccc", backgroundColor: "#efefef" }).addClass("panelContain"); this.panelElm = new bkElement("DIV").setStyle({ margin: "2px", marginTop: "0px", zoom: 1, overflow: "hidden" }).addClass("panel").appendTo(this.panelContain); this.panelContain.appendTo(E); var C = this.ne.options; var D = C.buttons; for (button in D) { this.addButton(button, C, true) } this.reorder(); E.noSelect() }, addButton: function(buttonName, options, noOrder){ var button = options.buttons[buttonName]; var type = (button.type) ? eval("(typeof(" + button.type + ') == "undefined") ? null : ' + button.type + ";") : nicEditorButton; var hasButton = bkLib.inArray(this.buttonList, buttonName); if (type && (hasButton || this.ne.options.fullPanel)) { this.panelButtons.push(new type(this.panelElm, buttonName, options, this.ne)); if (!hasButton) { this.buttonList.push(buttonName) } } }, findButton: function(B){ for (var A = 0; A < this.panelButtons.length; A++) { if (this.panelButtons[A].name == B) { return this.panelButtons[A] } } }, reorder: function(){ var C = this.buttonList; for (var B = 0; B < C.length; B++) { var A = this.findButton(C[B]); if (A) { this.panelElm.appendChild(A.margin) } } }, remove: function(){ this.elm.remove() } }); var nicEditorButton = bkClass.extend({ construct: function(D, A, C, B){ this.options = C.buttons[A]; this.name = A; this.ne = B; this.elm = D; this.margin = new bkElement("DIV").setStyle({ "float": "left", marginTop: "2px" }).appendTo(D); this.contain = new bkElement("DIV").setStyle({ width: "20px", height: "20px" }).addClass("buttonContain").appendTo(this.margin); this.border = new bkElement("DIV").setStyle({ backgroundColor: "#efefef", border: "1px solid #efefef" }).appendTo(this.contain); this.button = new bkElement("DIV").setStyle({ width: "18px", height: "18px", overflow: "hidden", zoom: 1, cursor: "pointer" }).addClass("button").setStyle(this.ne.getIcon(A, C)).appendTo(this.border); this.button.addEvent("mouseover", this.hoverOn.closure(this)).addEvent("mouseout", this.hoverOff.closure(this)).addEvent("mousedown", this.mouseClick.closure(this)).noSelect(); if (!window.opera) { this.button.onmousedown = this.button.onclick = bkLib.cancelEvent } B.addEvent("selected", this.enable.closure(this)).addEvent("blur", this.disable.closure(this)).addEvent("key", this.key.closure(this)); this.disable(); this.init() }, init: function(){ }, hide: function(){ this.contain.setStyle({ display: "none" }) }, updateState: function(){ if (this.isDisabled) { this.setBg() } else { if (this.isHover) { this.setBg("hover") } else { if (this.isActive) { this.setBg("active") } else { this.setBg() } } } }, setBg: function(A){ switch (A) { case "hover": var B = { border: "1px solid #666", backgroundColor: "#ddd" }; break; case "active": var B = { border: "1px solid #666", backgroundColor: "#ccc" }; break; default: var B = { border: "1px solid #efefef", backgroundColor: "#efefef" } } this.border.setStyle(B).addClass("button-" + A) }, checkNodes: function(A){ var B = A; do { if (this.options.tags && bkLib.inArray(this.options.tags, B.nodeName)) { this.activate(); return true } } while (B = B.parentNode && B.className != "nicEdit"); B = $BK(A); while (B.nodeType == 3) { B = $BK(B.parentNode) } if (this.options.css) { for (itm in this.options.css) { if (B.getStyle(itm, this.ne.selectedInstance.instanceDoc) == this.options.css[itm]) { this.activate(); return true } } } this.deactivate(); return false }, activate: function(){ if (!this.isDisabled) { this.isActive = true; this.updateState(); this.ne.fireEvent("buttonActivate", this) } }, deactivate: function(){ this.isActive = false; this.updateState(); if (!this.isDisabled) { th

    Read the article

  • Parse SyndicationItem to c# class

    - by user285677
    What's the best way to parse the folowing rss Syndication Item into a c# class: <rss version="2.0" xmlns:fh="http://rss.flightstats.com/ns/rss/1.0"> <channel> <title>FlightStats - Lisboa Airport Departures</title> <language>en-us</language> <copyright>Copyright (c) 2007 Conducive Technology Inc. All rights reserved.</copyright> <description>FlightStats is your source for airport and flight information</description> <link>http://www.flightstats.com?utm_source=49e3481552e7c4c9:4e080df5:1281bf8969d:60e0&utm_medium=cpc&utm_campaign=rss</link> <pubDate>Sun, 25 Apr 2010 12:30:14 +0000</pubDate> <lastBuildDate>Sun, 25 Apr 2010 12:30:14 +0000</lastBuildDate> <ttl>15</ttl> <image> <url>http://dem5xqcn61lj8.cloudfront.net/Widgets/images/flightstats_logo_widget.gif</url> <title>FlightStats - Lisboa Airport Departures</title> <link>http://www.flightstats.com?utm_source=49e3481552e7c4c9:4e080df5:1281bf8969d:60e0&utm_medium=cpc&utm_campaign=rss</link> </image> <item> <fh:FlightHistory FlightHistoryId="190011545" DepartureDate="2010-04-25 12:00" ArrivalDate="2010-04-25 14:45" PublishedDepartureDate="2010-04-25 12:00" PublishedArrivalDate="2010-04-25 14:45" ScheduledGateDepartureDate="2010-04-25 12:00" ScheduledGateArrivalDate="2010-04-25 14:45" EstimatedGateArrivalDate="2010-04-25 14:40" ActualRunwayDepartureDate="2010-04-25 12:13" FlightNumber="8461" StatusCode="A" Status="Active" CreatorCode="O" ScheduledBlockTime="105" DepartureAirportTimeZoneOffset="1" ArrivalAirportTimeZoneOffset="2" ScheduledAircraftType="320" DepartureTerminal="T1" ArrivalTerminal="1" TrackingEnabled="False"> <fh:Airline AirlineCode="VY" Name="Vueling Airlines" /> <fh:Origin AirportCode="LIS" Name="Lisboa Airport" City="Lisbon" CountryCode="PT" /> <fh:Destination AirportCode="BCN" Name="Barcelona Airport" City="Barcelona" StateCode="SP" CountryCode="ES" /> </fh:FlightHistory> <guid isPermaLink="false">VY8461LISBCN</guid> <title>VY 8461 LIS-BCN Departed</title> <description> teste </description> <link>http://www.flightstats.com/go/FlightStatus/flightStatusByFlight.do? id=190011545&utm_source=49e3481552e7c4c9:4e080df5:1281bf8969d:60e0&utm_medium=cpc&utm_campaign=rss</link> </item> </channel> </rss>

    Read the article

  • .Net Crystal Report printing application running on termianal service connection errors when session

    - by MrEdmundo
    I have created a .Net application to run on an App Server that gets requests for a report and prints out the requested report. The C# application uses Crystal Reports to load the report and subsequently print it out. The application is run on Server which is connected to via a Remote Desktop connection under a particular user account (required for old apps). When I disconnect from the Remote Session the application starts raising exceptions such as: Message: CrystalDecisions.Shared.CrystalReportsException: Load report failed This type of error is never raised when the Remote Session is active. The server running the app is running Windows Server 2003, my box which creates the connection is Windows XP. I appreciate this is fairly weird, however I cannot see any problem with the application deployment I have created. Does anyone know what could be cause this issue? EDIT: I bit the bullet and created the application as a windows service, obviously this doesn't take long I just wasn't convinced it would solve the problem. Anyway it doesn't!!! I have also tried removing the multi-thread code that was calling the print function asynchronously. I did this in order to simply the app and narrow down the reason it could fail. Anyway, this didn't improve the situation either! EDIT: The two errors I get are: System.Runtime.InteropServices.COMException (0x80000201): Invalid printer specified. at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal) at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value) at Dsa.PrintServer.Service.Service.PrintCrystalReport(Report report) The printer isn't invalid, this is confirmed when 60 seconds later the time ticks and the report is printed successfully. And The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext) --- End of inner exception stack trace --- at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN) at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN) at Dsa.PrintServer.Service.Service.PrintCrystalReport(Report report) EDIT: I ran filemon to check if there were any access issue. At the point when the error occurs file mon reports Request: OPEN | Path: C:\windows\assembly\gac_msil\system\2.0.0.0__b77a5c561934e089\ws2_32.dll | Result: NOT FOUND | Other: Attributes Error

    Read the article

  • Speech Recognition Grammar Rules using delphi code

    - by XBasic3000
    I need help to make ISeechRecoGrammar without using xml format. Like creating it on runtime on delphi. example: procedure TForm1.FormCreate(Sender: TObject); var AfterCmdState: ISpeechGrammarRuleState; temp : OleVariant; Grammar: ISpeechRecoGrammar; PropertiesRule: ISpeechGrammarRule; ItemRule: ISpeechGrammarRule; TopLevelRule: ISpeechGrammarRule; begin SpSharedRecoContext.EventInterests := SREAllEvents; Grammar := SpSharedRecoContext.CreateGrammar(m_GrammarId); TopLevelRule := Grammar.Rules.Add('TopLevelRule', SRATopLevel Or SRADynamic, 1); PropertiesRule := Grammar.Rules.Add('PropertiesRule', SRADynamic, 2); ItemRule := Grammar.Rules.Add('ItemRule', SRADynamic, 3); AfterCmdState := TopLevelRule.AddState; TopLevelRule.InitialState.AddWordTransition(AfterCmdState, 'test', temp, temp, '****', 0, temp, temp); Grammar.Rules.Commit; Grammar.CmdSetRuleState('TopLevelRule', SGDSActive); end; can someone reconstruct or midify this delphi code (above) to be exactly same function below(xml). <GRAMMAR LANGID="409"> <!-- "Constant" definitions --> <DEFINE> <ID NAME="RID_start" VAL="1"/> <ID NAME="PID_action" VAL="2"/> <ID NAME="PID_actionvalue" VAL="3"/> </DEFINE> <!-- Rule definitions --> <RULE NAME="start" ID="RID_start" TOPLEVEL="ACTIVE"> <P>i am</P> <RULEREF NAME="action" PROPNAME="action" PROPID="PID_action" /> <O>OK</O> </RULE> <RULE NAME="action"> <L PROPNAME="actionvalue" PROPID="PID_actionvalue"> <P VAL="1">albert</P> <P VAL="2">francis</P> <P VAL="3">alex</P> </L> </RULE> </GRAMMAR> sorry for my english...

    Read the article

  • C# Problem with Settings.Reload() and Settings.Save() Settings not loading

    - by galford13x
    I have a strange issue that I can't figure out. I have a custom settings class that inherits ApplicationSettingsBase. It has a user scoped settings as shown below. /// <summary> /// The Last Active Account /// </summary> [UserScopedSettingAttribute()] public AccountKeyClass ActiveAccount { get { try { return (AccountKeyClass)this["ActiveAccount"]; } catch(Exception error){} return null; } set { this["ActiveAccount"] = value; if (!this.AccountList.Contains(value)) { //this.AccountList.Add(value); } } } /// <summary> /// Account List /// Key: UserID /// Value: AccountKeyClass /// </summary> [UserScopedSettingAttribute()] public List<AccountKeyClass> AccountList { get { try { if(this["AccountList"] != null) return (List<AccountKeyClass>)this["AccountList"]; } catch(Exception error){} return null; } set { this["AccountList"] = value; } } I have two forms, a Main form and a Settings form in which to change application settings. When I creating the SettingsForm and change AccountList Settings value, the user.config file changes as excepected. My Apply/Ok button for my SettingsForm calls Settings.Save() then Settings.Reload() then closes the form. The problem is that when .Reload() is called, the Settings.AccountList becomes null. Whats more is that the user.config file never changes, if i close the application and reopen, the user.config file is still correct, but the Settings.AccountList is never read in. The Settings.AccountList is read in if i never call the .Reload() however. Update: If I create a List and Save(); from my MainForm, then the AccountList will be read in from my user.config fine. However If I add to the AccountList using my secondary form (SettingsForm) and call Save() then the next time the application is run the settings are not read in and a null value is returned in it's place. This happens even if I do not use Reload(). I think the problem has something to do with using the Generic List<. The AccountKeyClass that is being saved is saved as Serialized XML.

    Read the article

  • Need Help Setting an Image with Transparent Background to Clipboard

    - by AMissico
    I need help setting a transparent image to the clipboard. I keep getting "handle is invalid". Basically, I need a "second set of eyes" to look over the following code. (The complete working project at ftp://missico.net/ImageVisualizer.zip.) This is an image Debug Visualizer class library, but I made the included project to run as an executable for testing. (Note that window is a toolbox window and show in taskbar is set to false.) I was tired of having to perform a screen capture on the toolbox window, open the screen capture with an image editor, and then deleting the background added because it was a screen capture. So I thought I would quickly put the transparent image onto the clipboard. Well, the problem is...no transparency support for Clipboard.SetImage. Google to the rescue...not quite. This is what I have so far. I pulled from a number of sources. See the code for the main reference. My problem is the "invalid handle" when using CF_DIBV5. Do I need to use BITMAPV5HEADER and CreateDIBitmap? Any help from you GDI/GDI+ Wizards would be greatly appreciated. public static void SetClipboardData(Bitmap bitmap, IntPtr hDC) { const uint SRCCOPY = 0x00CC0020; const int CF_DIBV5 = 17; const int CF_BITMAP = 2; //'reference //'http://social.msdn.microsoft.com/Forums/en-US/winforms/thread/816a35f6-9530-442b-9647-e856602cc0e2 IntPtr memDC = CreateCompatibleDC(hDC); IntPtr memBM = CreateCompatibleBitmap(hDC, bitmap.Width, bitmap.Height); SelectObject(memDC, memBM); using (Graphics g = Graphics.FromImage(bitmap)) { IntPtr hBitmapDC = g.GetHdc(); IntPtr hBitmap = bitmap.GetHbitmap(); SelectObject(hBitmapDC, hBitmap); BitBlt(memDC, 0, 0, bitmap.Width, bitmap.Height, hBitmapDC, 0, 0, SRCCOPY); if (!OpenClipboard(IntPtr.Zero)) { throw new System.Runtime.InteropServices.ExternalException("Could not open Clipboard", new Win32Exception()); } if (!EmptyClipboard()) { throw new System.Runtime.InteropServices.ExternalException("Unable to empty Clipboard", new Win32Exception()); } //IntPtr hClipboard = SetClipboardData(CF_BITMAP, memBM); //works but image is not transparent //all my attempts result in SetClipboardData returning hClipboard = IntPtr.Zero IntPtr hClipboard = SetClipboardData(CF_DIBV5, memBM); //because if (hClipboard == IntPtr.Zero) { // InnerException: System.ComponentModel.Win32Exception // Message="The handle is invalid" // ErrorCode=-2147467259 // NativeErrorCode=6 // InnerException: throw new System.Runtime.InteropServices.ExternalException("Could not put data on Clipboard", new Win32Exception()); } if (!CloseClipboard()) { throw new System.Runtime.InteropServices.ExternalException("Could not close Clipboard", new Win32Exception()); } g.ReleaseHdc(hBitmapDC); } } private void __copyMenuItem_Click(object sender, EventArgs e) { using (Graphics g = __pictureBox.CreateGraphics()) { IntPtr hDC = g.GetHdc(); MemoryStream ms = new MemoryStream(); __pictureBox.Image.Save(ms, ImageFormat.Png); ms.Seek(0, SeekOrigin.Begin); Image imag = Image.FromStream(ms); // Derive BitMap object using Image instance, so that you can avoid the issue //"a graphics object cannot be created from an image that has an indexed pixel format" Bitmap img = new Bitmap(new Bitmap(imag)); SetClipboardData(img, hDC); g.ReleaseHdc(); } }

    Read the article

  • MetadataType, inherited properties and client validation in ASP.NET MVC 2

    - by Kristoffer Ahl
    Inherited properties and MetadataType does not seem to work with client side validation in ASP.NET MVC 2. The validation of our MetadataTypes work as expected on the server but for some reason it does not generate the appropriate client scripts for it. Client side validation kicks in as expected for properties with the DataAnnotations attributes set on the PersonView so I know that client side validation is active and that it works. Does anyone know if or how it can be fixed? Here's what we have: public abstract class PersonView { public string FirstName { get; set; } public string LastName { get; set; } public string Email { get; set; } [Required] public string PhoneNumber { get; set; } public string AddressLine1 { get; set; } public string AddressLine2 { get; set; } public string AddressZipCode { get; set; } public string AddressCity { get; set; } public string AddressCountry { get; set; } } [MetadataType(typeof(CustomerViewMetaData))] public class CustomerView : PersonView {} [MetadataType(typeof(GuestViewMetaData))] public class GuestView : PersonView {} public class GuestViewMetaData { [Required(ErrorMessage = "The guests firstname is required")] public string FirstName { get; set; } [Required(ErrorMessage = "The guests lastname is required")] public string LastName { get; set; } } public class CustomerViewMetaData { [Required(ErrorMessage = "The customers firstname is required")] public string FirstName { get; set; } [Required(ErrorMessage = "The customers lastname is required")] public string LastName { get; set; } [Required(ErrorMessage = "The customers emails is required")] public string Email { get; set; } } As you can see, it's nothing fancy or strange in there... Can it be fixed? Is it a bug in ASP.NET MVC 2?

    Read the article

  • need help with jquery selectors

    - by photographer
    I've got code like that: <ul class="gallery_demo_unstyled"> <li class="active"><img src='001.jpg' /></li> <li><img src='002.jpg' /></li> <li><img src='003.jpg' /></li> <li><img src='004.jpg' /></li> <li><img src='005.jpg' /></li> <li><img src='006.jpg' /></li> </ul> <div class="Paginator"> <a href="../2/" class="Prev">&lt;&lt;</a> <a href="../1/">1</a> <a href="../2/">2</a> <span class="this-page">3</span> <a href="../4/">4</a> <a href="../5/">5</a> <a href="../4/" class="Next">&gt;&gt;</a> </div> <div class="Albums"><div class="AlbumsMenu"> <p><b>ALBUMS</b></p> <p><a href="../../blackandwhite/1/" >blackandwhite</a></p> <p><a href="../../color/1/" class='this-page'>>>color</a></p> <p><a href="../../film/1/" >film</a></p> <p><a href="../../digital/1/" >digital</a></p> <p><a href="../../portraits/1/" >portraits</a></p> </div></div> ...and some JavaScript/jQuery allowing to cycle through the images (the very top li elements) going back to the first image after the last one: $$.nextSelector = function(selector) { return $(selector).is(':last-child') ? $(selector).siblings(':first-child') : $(selector).next(); }; Current page is always 'this-page' class (span or p in my case, but I could change that if necessary). The question: what should I change in my code to make it go after the last image to the next page instead of cycling through the page over and over again, and after the last page to the next album? And to the first image on the first page of the first album after the last-last-last (or just stop there — don't really care)?

    Read the article

  • PostgreSQL to Data-Warehouse: Best approach for near-real-time ETL / extraction of data

    - by belvoir
    Background: I have a PostgreSQL (v8.3) database that is heavily optimized for OLTP. I need to extract data from it on a semi real-time basis (some-one is bound to ask what semi real-time means and the answer is as frequently as I reasonably can but I will be pragmatic, as a benchmark lets say we are hoping for every 15min) and feed it into a data-warehouse. How much data? At peak times we are talking approx 80-100k rows per min hitting the OLTP side, off-peak this will drop significantly to 15-20k. The most frequently updated rows are ~64 bytes each but there are various tables etc so the data is quite diverse and can range up to 4000 bytes per row. The OLTP is active 24x5.5. Best Solution? From what I can piece together the most practical solution is as follows: Create a TRIGGER to write all DML activity to a rotating CSV log file Perform whatever transformations are required Use the native DW data pump tool to efficiently pump the transformed CSV into the DW Why this approach? TRIGGERS allow selective tables to be targeted rather than being system wide + output is configurable (i.e. into a CSV) and are relatively easy to write and deploy. SLONY uses similar approach and overhead is acceptable CSV easy and fast to transform Easy to pump CSV into the DW Alternatives considered .... Using native logging (http://www.postgresql.org/docs/8.3/static/runtime-config-logging.html). Problem with this is it looked very verbose relative to what I needed and was a little trickier to parse and transform. However it could be faster as I presume there is less overhead compared to a TRIGGER. Certainly it would make the admin easier as it is system wide but again, I don't need some of the tables (some are used for persistent storage of JMS messages which I do not want to log) Querying the data directly via an ETL tool such as Talend and pumping it into the DW ... problem is the OLTP schema would need tweaked to support this and that has many negative side-effects Using a tweaked/hacked SLONY - SLONY does a good job of logging and migrating changes to a slave so the conceptual framework is there but the proposed solution just seems easier and cleaner Using the WAL Has anyone done this before? Want to share your thoughts?

    Read the article

  • Mac 10.6 Universal Binary scipy: cephes/specfun "_aswfa_" symbol not found

    - by Markus
    Hi folks, I can't get scipy to function in 32 bit mode when compiled as a i386/x86_64 universal binary, and executed on my 64 bit 10.6.2 MacPro1,1. My python setup With the help of this answer, I built a 32/64 bit intel universal binary of python 2.6.4 with the intention of using the arch command to select between the architectures. (I managed to make some universal binaries of a few libraries I wanted using lipo.) That all works. I then installed scipy according to the instructions on hyperjeff's article, only with more up-to-date numpy (1.4.0) and skipping the bit about moving numpy aside briefly during the installation of scipy. Now, everything except scipy seems to be working as far as I can tell, and I can indeed select between 32 and 64 bit mode using arch -i386 python and arch -x86_64 python. The error Scipy complains in 32 bit mode: $ arch -x86_64 python -c "import scipy.interpolate; print 'success'" success $ arch -i386 python -c "import scipy.interpolate; print 'success'" Traceback (most recent call last): File "<string>", line 1, in <module> File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/interpolate/__init__.py", line 7, in <module> from interpolate import * File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/interpolate/interpolate.py", line 13, in <module> import scipy.special as spec File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/__init__.py", line 8, in <module> from basic import * File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/basic.py", line 8, in <module> from _cephes import * ImportError: dlopen(/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so, 2): Symbol not found: _aswfa_ Referenced from: /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so Expected in: flat namespace in /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so Attempt at tracking down the problem It looks like scipy.interpolate imports something called _cephes, which looks for a symbol called _aswfa_ but can't find it in 32 bit mode. Browsing through scipy's source, I find an ASWFA subroutine in specfun.f. The only scipy product file with a similar name is specfun.so, but both that and _cephes.so appear to be universal binaries: $ cd /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/ $ file _cephes.so specfun.so _cephes.so: Mach-O universal binary with 2 architectures _cephes.so (for architecture i386): Mach-O bundle i386 _cephes.so (for architecture x86_64): Mach-O 64-bit bundle x86_64 specfun.so: Mach-O universal binary with 2 architectures specfun.so (for architecture i386): Mach-O bundle i386 specfun.so (for architecture x86_64): Mach-O 64-bit bundle x86_64 Ho hum. I'm stuck. Things I may try but haven't figured out how yet include compiling specfun.so myself manually, somehow. I would imagine that scipy isn't broken for all 32 bit machines, so I guess something is wrong with the way I've installed it, but I can't figure out what. I don't really expect a full answer given my fairly unique (?) setup, but if anyone has any clues that might point me in the right direction, they'd be greatly appreciated. (edit) More details to address questions: I'm using gfortran (GNU Fortran from GCC 4.2.1 Apple Inc. build 5646). Python 2.6.4 was installed more-or-less like so: cd /tmp curl -O http://www.python.org/ftp/python/2.6.4/Python-2.6.4.tar.bz2 tar xf Python-2.6.4.tar.bz2 cd Python-2.6.4 # Now replace buggy pythonw.c file with one that supports the "arch" command: curl http://bugs.python.org/file14949/pythonw.c | sed s/2.7/2.6/ > Mac/Tools/pythonw.c ./configure --enable-framework=/Library/Frameworks --enable-universalsdk=/ --with-universal-archs=intel make -j4 sudo make frameworkinstall Scipy 0.7.1 was installed pretty much as described as here, but it boils down to a simple sudo python setup.py install. It would indeed appear that the symbol is undefined in the i386 architecture if you look at the _cephes library with nm, as suggested by David Cournapeau: $ nm -arch x86_64 /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so | grep _aswfa_ 00000000000d4950 T _aswfa_ 000000000011e4b0 d _oblate_aswfa_data 000000000011e510 d _oblate_aswfa_nocv_data (snip) $ nm -arch i386 /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so | grep _aswfa_ U _aswfa_ 0002e96c d _oblate_aswfa_data 0002e99c d _oblate_aswfa_nocv_data (snip) however, I can't yet explain its absence.

    Read the article

  • How can I do something ~after~ an event has fired in C#?

    - by Siracuse
    I'm using the following project to handle global keyboard and mouse hooking in my C# application. This project is basically a wrapper around the Win API call SetWindowsHookEx using either the WH_MOUSE_LL or WH_KEYBOARD_LL constants. It also manages certain state and generally makes this kind of hooking pretty pain free. I'm using this for a mouse gesture recognition software I'm working on. Basically, I have it setup so it detects when a global hotkey is pressed down (say CTRL), then the user moves the mouse in the shape of a pre-defined gesture and then releases global hotkey. The event for the KeyDown is processed and tells my program to start recording the mouse locations until it receives the KeyUp event. This is working fine and it allows an easy way for users to enter a mouse-gesture mode. Once the KeyUp event fires and it detects the appropriate gesture, it is suppose to send certain keystrokes to the active window that the user has defined for that particular gesture they just drew. I'm using the SendKeys.Send/SendWait methods to send output to the current window. My problem is this: When the user releases their global hotkey (say CTRL), it fires the KeyUp event. My program takes its recorded mouse points and detects the relevant gesture and attempts to send the correct input via SendKeys. However, because all of this is in the KeyUp event, that global hotkey hasn't finished being processed. So, for example if I defined a gesture to send the key "A" when it is detected, and my global hotkey is CTRL, when it is detected SendKeys will send "A" but while CTRL is still "down". So, instead of just sending A, I'm getting CTRL-A. So, in this example, instead of physically sending the single character "A" it is selecting-all via the CTRL-A shortcut. Even though the user has released the CTRL (global hotkey), it is still being considered down by the system. Once my KeyUp event fires, how can I have my program wait some period of time or for some event so I can be sure that the global hotkey is truly no longer being registered by the system, and only then sending the correct input via SendKeys?

    Read the article

  • Problem with .NET Settings.Reload() and Settings.Save() Settings not loading

    - by galford13x
    I have a strange issue that I can't figure out. I have a custom settings class that inherits ApplicationSettingsBase. It has a user scoped settings as shown below. /// <summary> /// The Last Active Account /// </summary> [UserScopedSettingAttribute()] public AccountKeyClass ActiveAccount { get { try { return (AccountKeyClass)this["ActiveAccount"]; } catch(Exception error){} return null; } set { this["ActiveAccount"] = value; if (!this.AccountList.Contains(value)) { //this.AccountList.Add(value); } } } /// <summary> /// Account List /// Key: UserID /// Value: AccountKeyClass /// </summary> [UserScopedSettingAttribute()] public List<AccountKeyClass> AccountList { get { try { if(this["AccountList"] != null) return (List<AccountKeyClass>)this["AccountList"]; } catch(Exception error){} return null; } set { this["AccountList"] = value; } } I have two forms, a Main form and a Settings form in which to change application settings. When I creating the SettingsForm and change AccountList Settings value, the user.config file changes as excepected. My Apply/Ok button for my SettingsForm calls Settings.Save() then Settings.Reload() then closes the form. The problem is that when .Reload() is called, the Settings.AccountList becomes null. Whats more is that the user.config file never changes, if i close the application and reopen, the user.config file is still correct, but the Settings.AccountList is never read in. The Settings.AccountList is read in if i never call the .Reload() however. Update: If I create a List and Save(); from my MainForm, then the AccountList will be read in from my user.config fine. However If I add to the AccountList using my secondary form (SettingsForm) and call Save() then the next time the application is run the settings are not read in and a null value is returned in it's place. This happens even if I do not use Reload(). I think the problem has something to do with using the Generic List<. The AccountKeyClass that is being saved is saved as Serialized XML.

    Read the article

  • zend tool is not working

    - by user362155
    Hi, I've installed ZendStudio 7.2 it creates project normally with no error but when i try to add action(s) in it, it says project profile does not exist. and the error log is as follow: executing zf create action showLatest index-action-included An Error Has Occurred A project profile was not found. Zend Framework Command Line Console Tool v1.10.2 Details for action "Create" and provider "Action" Action zf create action name controller-name[=Index] view-included[=1] module Failed loading ./ZendDebugger.so: (null) PHP Warning: PHP Startup: Unable to load dynamic library './ext/bcmath.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/bz2.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/calendar.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/ctype.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/curl.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/exif.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/fileinfo.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/ftp.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/gd.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/imagick.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/json.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/ldap.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mbstring.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mcrypt.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/memcache.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mhash.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mime_magic.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mssql.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mysql.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/mysqli.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/pcntl.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/pgsql.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/posix.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/shmop.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/soap.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sockets.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sqlite.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sysvmsg.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sysvsem.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/sysvshm.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/tidy.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/tokenizer.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/wddx.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/xmlreader.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/xmlrpc.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/xsl.so' - (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load dynamic library './ext/zip.so' - (null) in Unknown on line 0 please help me to configure latest ZendTool with ZendStudio 7.2 or how can i get rid of this. i am runin ZS 7.2 on my mac os x 10.5.8 thanks.

    Read the article

  • ASP.NET Web Service Throws 401 (unauthorized) Error

    - by user268611
    Hi Experts, I have this .NET application to be run in an intranet environment. It is configured so that it requires Windows Authentication before you can access the website (Anonymous access is disabled). This website calls a web service (enable anonymous access) and the web service calls the DB. We do have a token-based authentication between the web application and the web service to secure the communication between them. The issue I'm facing is that when I deploy this to production, I'm having an intermittent issue whereby the communication between the web application and the web service failed. The 401 issue was thrown. This is actually working fine in our QA environment. Is this an issue with Active Directory? Or could it be an isssue with FQDN as mentioned here: http://support.microsoft.com/default.aspx?scid=kb;en-us;896861? The weirdest thing is that this is happening intermittently when tested in both on the server itself and a remote workstation in my client's environment. But, this is working perfectly in my environment. OS: Windows Server SP1 IIS 6 .NET 3.5 Framework Any idea about the 401 (Unauthorized) issue?? Thx for the help... This is from the log... Event code: 3005 Event message: An unhandled exception has occurred. Event time: 4/5/2010 10:44:57 AM Event time (UTC): 4/5/2010 2:44:57 AM Event ID: 6c8ea2607b8d4e29a7f0b1c392b1cb21 Event sequence: 155112 Event occurrence: 2 Event detail code: 0 Application information: Application domain: xxx Trust level: Full Application Virtual Path: xxx Application Path: xxx Machine name: xxx Process information: Process ID: 4424 Process name: w3wp.exe Account name: NT AUTHORITY\NETWORK SERVICE Exception information: Exception type: WebException Exception message: The request failed with HTTP status 401: Unauthorized. Request information: Request URL: http://[ip]/[app_path] Request path: xxx User host address: [ip] User: xxx Is authenticated: True Authentication Type: Negotiate Thread account name: xxx Thread information: Thread ID: 6 Thread account name: xxx Is impersonating: False Stack trace: at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at wsVulnerabilityAdvisory.Service.test() at test.Page_Load(Object sender, EventArgs e) at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) at System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) at System.Web.UI.Control.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

    Read the article

  • Opinions on sensor / reading / alert database design

    - by Mark
    I've asked a few questions lately regarding database design, probably too many ;-) However I beleive I'm slowly getting to the heart of the matter with my design and am slowly boiling it down. I'm still wrestling with a couple of decisions regarding how "alerts" are stored in the database. In this system, an alert is an entity that must be acknowledged, acted upon, etc. Initially I related readings to alerts like this (very cut down) : - [Location] LocationId [Sensor] SensorId LocationId UpperLimitValue LowerLimitValue [SensorReading] SensorReadingId Value Status Timestamp [SensorAlert] SensorAlertId [SensorAlertReading] SensorAlertId SensorReadingId The last table is associating readings with the alert, because it is the reading that dictate that the sensor is in alert or not. The problem with this design is that it allows readings from many sensors to be associated with a single alert - whereas each alert is for a single sensor only and should only have readings for that sensor associated with it (should I be bothered that the DB allows this though?). I thought to simplify things, why even bother with the SensorAlertReading table? Instead I could do this: [Location] LocationId [Sensor] SensorId LocationId [SensorReading] SensorReadingId SensorId Value Status Timestamp [SensorAlert] SensorAlertId SensorId Timestamp [SensorAlertEnd] SensorAlertId Timestamp Basically I'm not associating readings with the alert now - instead I just know that an alert was active between a start and end time for a particular sensor, and if I want to look up the readings for that alert I can do. Obviously the downside is I no longer have any constraint stopping me deleting readings that occurred during the alert, but I'm not sure that the constraint is neccessary. Now looking in from the outside as a developer / DBA, would that make you want to be sick or does it seem reasonable? Is there perhaps another way of doing this that I may be missing? Thanks. EDIT: Here's another idea - it works in a different way. It stores each sensor state change, going from normal to alert in a table, and then readings are simply associated with a particular state. This seems to solve all the problems - what d'ya think? (the only thing I'm not sure about is calling the table "SensorState", I can't help think there's a better name (maybe SensorReadingGroup?) : - [Location] LocationId [Sensor] SensorId LocationId [SensorState] SensorStateId SensorId Timestamp Status IsInAlert [SensorReading] SensorReadingId SensorStateId Value Timestamp There must be an elegant solution to this!

    Read the article

  • Doubt about adopting CI (Hudson) into an existing automated Build Process (phing, svn)

    - by maraspin
    OUR CURRENT BUILD PROCESS We're a small team of developers (2 to 4 people depending on project) who currently use Phing to deploy code to a staging environment, before going live. We keep our code in a SVN repo, where the trunk holds current active development and, at certain times, we do make branches that we test and then (if successful), tag and export to the staging env. If everything goes well there too, we finally deploy'em in production servers. Actions are highly automated, but always triggered by human intervention. THE DOUBT We'd now like to introduce Continuous Integration (with Hudson) in the process; unfortunately we have a few doubts about activity syncing, since we're afraid that CI could somewhat interfere with our build process and cause certain problems. Considering that an automated CI cycle has a certain frequency of automatically executed actions, we in fact only see 2 possible cases for "integration", each with its own problems: Case A: each CI cycle produces a new branch with its own name; we do use such a name to manually (through phing as it happens now) export the code from the SVN to the staging env. The problem I see here is that (unless specific countermeasures are taken) the number of branches we have can grow out of control (let's suppose we commit often, so that we have a fresh new build/branch every N minutes). Case B: each CI cycle creates a new branch named 'current', for instance, which is tagged with a unique name only when we manually decide to export it to staging; the current branch, at any case is then deleted, as soon as the next CI cycle starts up. The problem we see here is that a new cycle could kick in while someone is tagging/exporting the 'current' branch to staging thus creating an inconsistent build (but maybe here I'm just too pessimist, since I confess I don't know whether SVN offers some built-in protection against this). With all this being said, I was wondering if anyone with similar experiences could be so kind to give us some hints on the subject, since none of the approaches depicted above looks completely satisfing to us. Is there something important we just completely left off in the overall picture? Thanks for your attention &, in advance, for your help!

    Read the article

  • C#.NET Socket Programming: Connecting to remote computers.

    - by Gio Borje
    I have a typical server in my end and a friend using a client to connect to my IP/Port and he consistently receives the exception: "A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond {MY_IP}:{MY_PORT}"—You don't need to know my IP. The client and server, however, work fine on the loopback address (127.0.0.1). I also do not have any firewall nor is windows firewall active. Server: static void Main(string[] args) { Console.Title = "Socket Server"; Console.WriteLine("Listening for messages..."); Socket serverSock = new Socket( AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); IPAddress serverIP = IPAddress.Any; IPEndPoint serverEP = new IPEndPoint(serverIP, 33367); SocketPermission perm = new SocketPermission(NetworkAccess.Accept, TransportType.Tcp, "98.112.235.18", 33367); serverSock.Bind(serverEP); serverSock.Listen(10); while (true) { Socket connection = serverSock.Accept(); Byte[] serverBuffer = new Byte[8]; String message = String.Empty; while (connection.Available > 0) { int bytes = connection.Receive( serverBuffer, serverBuffer.Length, 0); message += Encoding.UTF8.GetString( serverBuffer, 0, bytes); } Console.WriteLine(message); connection.Close(); } } Client: static void Main(string[] args) { // Design the client a bit Console.Title = "Socket Client"; Console.Write("Enter the IP of the server: "); IPAddress clientIP = IPAddress.Parse(Console.ReadLine()); String message = String.Empty; while (true) { Console.Write("Enter the message to send: "); // The messsage to send message = Console.ReadLine(); IPEndPoint clientEP = new IPEndPoint(clientIP, 33367); // Setup the socket Socket clientSock = new Socket( AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.Tcp); // Attempt to establish a connection to the server Console.Write("Establishing connection to the server... "); try { clientSock.Connect(clientEP); // Send the message clientSock.Send(Encoding.UTF8.GetBytes(message)); clientSock.Shutdown(SocketShutdown.Both); clientSock.Close(); Console.Write("Message sent successfully.\n\n"); } catch (Exception ex) { Console.WriteLine(ex.Message); } } }

    Read the article

  • ASMX Web Services with SOAP Extension

    - by digitall
    I am in the process of setting up a web service for an external client to connect to my client's application and update some information. I went the ASMX route (the rest of the application runs on WCF) because I knew the external client could be very difficult to deal with and I was trying to keep everything as simple as possible. They also aren't a .Net shop which makes things worse. After getting the service setup for them I provided the ASMX URL for them to see how to format the SOAP headers/message content. They have since come back and told me their tool is unable to send them in the format required by .Net and I can either come up with a different way to accept messages or we have to go with FTP. Based on this I have been researching how to intercept their message, reformat it the way my service requires it (which means adding two lines), and then let it process. This path led me to SOAP Extensions which I have been trying to work with but can't seem to figure out. When I have my sample application call the web service from the generated code Add Web Reference provides everything works great until I add in my extension. All it currently does is override ChainStream setting an internal stream equal to the one being passed in and returning a new stream, like this: private Stream newStream = null; private Stream oldStream = null; public override Stream ChainStream(Stream stream) { this.oldStream = stream; this.newStream = new MemoryStream(); return newStream; } I also override ProcessMessage and in it take the contents of oldStream and set newStream equal to that and then write to a different stream with an XmlWriter. I take that new stream and using a StreamReader read it into a string, with the end goal being manipulating it here and setting newStream (which is being used by ChainStream) equal to the contents of this. Here is that piece: public override void ProcessMessage(SoapMessage message) { switch (message.Stage) { case SoapMessageStage.BeforeDeserialize: this.Process(); break; default: break; } } private void Process() { this.newStream.Position = 0L; XmlTextReader reader = new XmlTextReader(this.oldStream); MemoryStream outStream = new MemoryStream(); using (XmlWriter writer = XmlWriter.Create(outStream)) { do { writer.WriteNode(reader, true); } while (reader.Read()); writer.Flush(); } outStream.Seek(0, SeekOrigin.Begin); StreamReader streamReader = new StreamReader(outStream); string message = streamReader.ReadToEnd(); newStream = outStream; newStream.Seek(0, SeekOrigin.Begin); streamReader.Close(); } By running this, which seems to me like it would be fine, my test application gets a 400 Bad Request back from the service. If I either don't use the extension or I don't do anything in ProcessMessage everything seems fine. Any suggestions to this? As a side note, once I get this working with the generated code from the WSDL I will be moving to a WebRequest to try sending the message to the service. Currently that bombs out with a 415 Unsupported Media Type response. I'm trying to keep this post to one question but if anyone has any tips with using a WebRequest to connect to an ASMX service it would be much appreciated!

    Read the article

  • Problem with core data migration mapping model

    - by dpratt
    I have an iphone app that uses Core Data to do storage. I have successfully deployed it, and now I'm working on the second version. I've run into a problem with the data model that will require a few very simple data transformations at the time that the persistent store gets upgraded, so I can't just use the default inferred mapping model. My object model is stored in an .xcdatamodeld bundle, with versions 1.0 and 1.1 next to each other. Version 1.1 is set as the active version. Everything works fine when I use the default migration behavior and set NSInferMappingModelAutomaticallyOption to YES. My sqlite storage gets upgraded from the 1.0 version of the model, and everything is good except for, of course, the few transformations I need done. As an additional experimental step, I added a new Mapping Model to the core data model bundle, and have made no changes to what xcode generated. When I run my app (with an older version of the data store), I get the following * Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: 'Object's persistent store is not reachable from this NSManagedObjectContext's coordinator' What am I doing wrong? Here's my code for to get the managed object model and the persistent store coordinator. - (NSPersistentStoreCoordinator *)persistentStoreCoordinator { if (_persistentStoreCoordinator != nil) { return _persistentStoreCoordinator; } _persistentStoreCoordinator = [[NSPersistentStoreCoordinator alloc] initWithManagedObjectModel:[self managedObjectModel]]; NSURL *storeUrl = [NSURL fileURLWithPath: [[self applicationDocumentsDirectory] stringByAppendingPathComponent: @"gti_store.sqlite"]]; NSError *error; NSDictionary *options = [NSDictionary dictionaryWithObjectsAndKeys: [NSNumber numberWithBool:YES], NSMigratePersistentStoresAutomaticallyOption, [NSNumber numberWithBool:YES], NSInferMappingModelAutomaticallyOption, nil]; if (![_persistentStoreCoordinator addPersistentStoreWithType:NSSQLiteStoreType configuration:nil URL:storeUrl options:options error:&error]) { NSLog(@"Eror creating persistent store coodinator - %@", [error localizedDescription]); } return _persistentStoreCoordinator; } - (NSManagedObjectModel *)managedObjectModel { if(_managedObjectModel == nil) { _managedObjectModel = [[NSManagedObjectModel mergedModelFromBundles:nil] retain]; NSDictionary *entities = [_managedObjectModel entitiesByName]; //add a sort descriptor to the 'Foo' fetched property so that it can have an ordering - you can't add these from the graphical core data modeler NSEntityDescription *entity = [entities objectForKey:@"Foo"]; NSFetchedPropertyDescription *fetchedProp = [[entity propertiesByName] objectForKey:@"orderedBar"]; NSSortDescriptor* sortDescriptor = [[[NSSortDescriptor alloc] initWithKey:@"index" ascending:YES] autorelease]; NSArray* sortDescriptors = [NSArray arrayWithObjects:sortDescriptor, nil]; [[fetchedProp fetchRequest] setSortDescriptors:sortDescriptors]; } return _managedObjectModel; }

    Read the article

  • How Do I Prevent Rails From Treating Updated Nested Attributes Differently From New Nested Attribute

    - by James
    I am using rails3 beta3 and couchdb via couchrest. I am not using active record. I want to add multiple "Sections" to a "Guide" and add and remove sections dynamically via a little javascript. I have looked at all the screencasts by Ryan Bates and they have helped immensely. The only difference is that I want to save all the sections as an array of sections instead of individual sections. Basically like this: "sections" => [{"title" => "Foo1", "content" => "Bar1"}, {"title" => "Foo2", "content" => "Bar2"}] So, basically I need the params hash to look like that when the form is submitted. When I create my form I am doing the following: <%= form_for @guide, :url => { :action => "create" } do |f| %> <%= render :partial => 'section', :collection => @guide.sections %> <%= f.submit "Save" %> <% end %> And my section partial looks like this: <%= fields_for "sections[]", section do |guide_section_form| %> <%= guide_section_form.text_field :section_title %> <%= guide_section_form.text_area :content, :rows => 3 %> <% end %> Ok, so when I create the guide with sections, it is working perfectly as I would like. The params hash is giving me a sections array just like I would want. The problem comes when I want edit guide/sections and save them again because rails is inserting the id of the guide in the id and name of each form field, which is screwing up the params hash on form submission. Just to be clear, here is the raw form output for a new resource: <input type="text" size="30" name="sections[][section_title]" id="sections__section_title"> <textarea rows="3" name="sections[][content]" id="sections__content" cols="40"></textarea> And here is what it looks like when editing an existing resource: <input type="text" value="Foo1" size="30" name="sections[cd2f2759895b5ae6cb7946def0b321f1][section_title]" id="sections_cd2f2759895b5ae6cb7946def0b321f1_section_title"> <textarea rows="3" name="sections[cd2f2759895b5ae6cb7946def0b321f1][content]" id="sections_cd2f2759895b5ae6cb7946def0b321f1_content" cols="40">Bar1</textarea> How do I force rails to always use the new resource behavior and not automatically add the id to the name and value. Do I have to create a custom form builder? Is there some other trick I can do to prevent rails from putting the id of the guide in there? I have tried a bunch of stuff and nothing is working. Thanks in advance!

    Read the article

  • Client-side policy error using JacORB (Java/CORBA) with SSL

    - by jason
    I'm trying to add SSL to an existing CORBA app, and I keep getting this error: org.omg.CORBA.NO_PERMISSION: Client-side policy requires SSL/TLS, but server doesn't support it vmcid: 0x0 minor code: 0 completed: No at org.jacorb.orb.iiop.ClientIIOPConnection.checkSSL(ClientIIOPConnection.java:535) at org.jacorb.orb.iiop.ClientIIOPConnection.connect(ClientIIOPConnection.java:144) at org.jacorb.orb.giop.GIOPConnection.sendMessage(GIOPConnection.java:835) at org.jacorb.orb.giop.GIOPConnection.sendRequest(GIOPConnection.java:805) at org.jacorb.orb.giop.ClientConnection.sendRequest(ClientConnection.java:302) at org.jacorb.orb.giop.ClientConnection.sendRequest(ClientConnection.java:282) at org.jacorb.orb.Delegate.invoke_internal(Delegate.java:919) at org.jacorb.orb.Delegate.invoke(Delegate.java:868) at org.jacorb.orb.Delegate.is_a(Delegate.java:1268) at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112) at databridge.autogen.ILoginManagerHelper.narrow(ILoginManagerHelper.java:57) at databridge.test.Client.main(Client.java:59) I have generated keystores for both client and server and exchanged the keys between the two. Using this setup, I can get the demo application that came in the JacORB download to run successfully. The only difference I can tell is that my test is using the Tie method to get the POA. There are some policies that go into that, but I can't find any information on what policies need to go in there to enable SSL, if any. I'm not even sure that's the problem as the JacORB demo doesn't set any policies on the server or poa. When I run the -Djavax.net.debug=ssl, I can see the keystores load up the trusted certs on both the client and the server. I'm just not sure what policies are being referred to here, but it's odd that the demo works and the test doesn't using the exact same keystores and properties. I've emailed the mailing list, but I'm not holding out much hope as that doesn't seem to be very active. Any help would be greatly appreciated. Below are my properties files. Server Props: jacorb.security.support_ssl=on jacorb.security.ssl.server.supported_options=60 jacorb.security.ssl.server.required_options=20 jacorb.ssl.socket_factory=org.jacorb.security.ssl.sun_jsse.SSLSocketFactory jacorb.ssl.server_socket_factory=org.jacorb.security.ssl.sun_jsse.SSLServerSocketFactory jacorb.security.keystore=dbserver.jks jacorb.security.keystore_password=dbsslserver_pass jacorb.security.jsse.trustees_from_ks=on jacorb.security.jsse.log.verbosity=4 jacorb.implname=StandardImplName client props jacorb.security.support_ssl=on jacorb.security.ssl.client.supported_options=60 jacorb.security.ssl.client.required_options=20 jacorb.ssl.socket_factory=org.jacorb.security.ssl.sun_jsse.SSLSocketFactory jacorb.security.keystore=dbclient.jks jacorb.security.keystore_password=dbsslclient_pass jacorb.security.jsse.trustees_from_ks=on jacorb.security.jsse.log.verbosity=4 jacorb.implname=StandardImplName

    Read the article

  • jQuery: how can I clear content without getting the dreaded "stop running this script?" dialog?

    - by Cheeso
    I have a div, that holds a div. like this: <div id='reportHolder' class='column'> <div id='report'> </div> </div> Within the inner div, I add a bunch (7-12) of pairs of a and div elements, like this: <h4><a>Heading1</a></h4> <div> ...content here....</div> The total size of the content, is maybe 200k. Each div just contains a fragment of HTML. After I add all the content, I then create an accordion. like this: $('#report').accordion({collapsible:true, active:false}); This all works fine. The problem is, when I try to clear or remove the report div, it takes a looooooong time, and I get 3 or 4 popups asking "Do you want to stop running this script?" I have tried several ways: option 1: $('#report').accordion('destroy'); $('#report').remove(); $("#reportHolder").html("<div id='report'> </div>"); option 2: $('#report').accordion('destroy'); $('#report').html(''); $("#reportHolder").html("<div id='report'> </div>"); option 3: $('#report').accordion('destroy'); $("#reportHolder").html("<div id='report'> </div>"); No matter what, it hangs for a long while. The call to accordion('destroy') seems to not be the source of the delay. It's the erasure of the html content within the report div. EDIT - fixed typo. ps: this happens on FF3.5 as well as IE8 . Questions: What is taking so long? How can I remove content more quickly?

    Read the article

  • PHP curl post to login to wordpress

    - by Sadi
    I followed http://stackoverflow.com/questions/724107 to login to wordpress, using php_curl, and it works fine as far I use WAMP, (apache/php). But when it comes to IIS on the dedicated server, it returns nothing. I have wrote the following function which is working fine on my local wamp, but when deployed to client's dedicated windows server 2k3, it doesn't. Please help me function post_url($url, array $query_string) { //$url = http://myhost.com/wptc/sys/wp/wp-login.php /* $query_string = array( 'log'=>'admin', 'pwd'=>'test', 'redirect_to'=>'http://google.com', 'wp-submit'=>'Log%20In', 'testcookie'=>1 ); */ //temp_dir is defined as folder = path/to/a/folder $cookie= temp_dir."cookie.txt"; $c = curl_init($url); if (count($query_string)) { curl_setopt ($c, CURLOPT_POSTFIELDS, http_build_query( $query_string ) ); } curl_setopt($c, CURLOPT_POST, 1); curl_setopt($c, CURLOPT_COOKIEFILE, $cookie); //curl_setopt($c, CURLOPT_SSL_VERIFYPEER, 1); //curl_setopt($c, CURLOPT_USERAGENT, "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.6) Gecko/20070725 Firefox/2.0.0.6"); curl_setopt($c, CURLOPT_TIMEOUT, 60); curl_setopt($c, CURLOPT_FOLLOWLOCATION, 1); curl_setopt($c, CURLOPT_RETURNTRANSFER, 1); //return the content curl_setopt($c, CURLOPT_COOKIEJAR, $cookie); //curl_setopt($c, CURLOPT_AUTOREFERER, 1); //curl_setopt($c, CURLOPT_REFERER, wp_admin_url); //curl_setopt($c, CURLOPT_MAXREDIRS, 10); curl_setopt($c, CURLOPT_HEADER, 0); //curl_setopt($c, CURLOPT_CRLF, 1); try { $result = curl_exec($c); } catch (Exception $e) { $result = 'error'; } curl_close ($c); return $result; //it return nothing (empty) } Other Facts curl_error($c); return nothing when header CURLOPT_HEADER is set to ON, it return this header HTTP/1.1 200 OK Cache-Control: no-cache, must-revalidate, max-age=0 Pragma: no-cache Content-Type: text/html; charset=UTF-8 Expires: Wed, 11 Jan 1984 05:00:00 GMT Last-Modified: Thu, 06 May 2010 21:06:30 GMT Server: Microsoft-IIS/7.0 X-Powered-By: PHP/5.2.13 Set-Cookie: wordpress_test_cookie=WP+Cookie+check; path=/wptc/sys/wp/ Set-Cookie: wordpress_b13661ceb5c3eba8b42d383be885d372=admin%7C1273352790%7C7d8ddfb6b1c0875c37c1805ab98f1e7b; path=/wptc/sys/wp/wp-content/plugins; httponly Set-Cookie: wordpress_b13661ceb5c3eba8b42d383be885d372=admin%7C1273352790%7C7d8ddfb6b1c0875c37c1805ab98f1e7b; path=/wptc/sys/wp/wp-admin; httponly Set-Cookie: wordpress_logged_in_b13661ceb5c3eba8b42d383be885d372=admin%7C1273352790%7Cb90825fb4a7d5da9b5dc4d99b4e06049; path=/wptc/sys/wp/; httponly Refresh: 0;url=http://myhost.com/wptc/sys/wp/wp-admin/ X-Powered-By: ASP.NET Date: Thu, 06 May 2010 21:06:30 GMT Content-Length: 0 CURL version info: Array ( [version_number] = 463872 [age] = 3 [features] = 2717 [ssl_version_number] = 0 [version] = 7.20.0 [host] = i386-pc-win32 [ssl_version] = OpenSSL/0.9.8k [libz_version] = 1.2.3 [protocols] = Array ( [0] = dict [1] = file [2] = ftp [3] = ftps [4] = http [5] = https [6] = imap [7] = imaps [8] = ldap [9] = pop3 [10] = pop3s [11] = rtsp [12] = smtp [13] = smtps [14] = telnet [15] = tftp ) ) PHP Version 5.2.13 Windows Server 2K3 IIS 7 Working fine on Apache, PHP 3.0 on my localhost (windows)

    Read the article

< Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >