Search Results

Search found 18160 results on 727 pages for 'jdk 7 feature complete'.

Page 357/727 | < Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >

• How to have 2 windows machines on the same network with the same IP address

  - by Stu

  I have a custom made ADC device that is spitting out data by addressed UDP packets. I have that device plugged into a 4 port switch. I have one windows embedded standard 7 machine which is the normal recipient of that data. To be able to receive the data (Using LabVIEW) the windows network adapter IPv4 settings must have a static IP address that corresponds to the UDP packet destination. I would like to add a second windows machine (This one is just regular Win 7 Pro) to simultaneously catch the data, however with all devices connected to the switch, the Win 7 Pro machine recognizes an IP address conflict and will not take the setting for the required static IP address. (The network adaptor settings show that the correct value has been entered but ipconfig shows that it is not actually set.) Neither windows machine needs to transmit network data, they only need to be able to receive the UDP data from the ADC device. Is there any way to disable this IP address conflict detection 'feature' of windows networking?

  Read the article

• Need an alerting system if my cloning script fails

  - by rahum

  I've configured a nightly rsync to mirror one server to a standby offsite backup server. The total datastore on the primary is 1.5TB. In the course of getting this working, I ran into numerous instabilities with the environment, which I seem to have sorted out, but even though it's now working, I am still nervous. This is intended to be a disaster-scenario standby server, and if disaster strikes and the standby does not have all the proper data synchronized, I'm out of a job. Thus, I want to script a system that will confirm, after each nightly sync, that the destination data matches the source. I realize that rsync does this, but if rsync doesn't complete fully (which was happening during the setup troubleshooting), I need to know. Any suggestions? I'm best with Ruby, if that is relevant for the solution.

  Read the article

• Cannot connect to telnet server

  - by BloodPhilia

  So, I can't use telnet to connect to any server but it works fine from a different computer. It just says it can't connect. I tried the following things: Disable firewall and AV protection. (Basically, there was no security feature left online) Telnet is set to "Trusted" in my AV protection. (Kaspersky Internet Security 2011) Using Putty to telnet, but apparently Putty's connection is also inhibited. (Says it can't connect to host) Disabling the telnet client in Control Panel and then re-enabling it. (Windows 7 Ultimate) hosts file is clean. Checked for nasties using MBAM and KIS 2011 as well as going though my HijackThis logs, nothing found. I can connect to the same machines/servers through the web browser, ping, tracert, etc. Only telnet seems to be blocked. Any other thoughts?

  Read the article

• How do I compare two Excel documents?

  - by arathorn

  The compare function in Word 2007 is very handy -- is there a similar capability in Excel 2007? I can't seem to find it... The documents I'm trying to compare are essentially two versions of the same content. Unfortunately, "Track Changes" has not been used. If file comparison not a built-in feature, what alternatives are out there for doing this? UPDATE [2009-08-05]: I ran across this (somewhat dated) overview of some of the third-party options that are available: http://www.comparesuite.com/solutions/compare_utilities_review/compare-files-excel.htm UPDATE [2009-08-12]: I ended up going with the Beyond Compare answer, but several of the other answers below were adequate as well, and might be more useful for someone else. (E.g., if you don't own a license for BeyondCompare, or want a comparison GUI that's integrated into Excel.) See also: How do I diff two spreadsheets on Stack Overflow

  Read the article

• Virtual hosting in Varnish with individual vcl files for configuration

  - by Michael Sørensen

  I wish to use varnish to put in front of an apache and a tomcat on the same server. Depending on the ip requested, it goes to a different backend. This works. Now for most of the sites the default varnish logic will work just fine. However for some specific sites I wish to use custom VCL code. I can test for host name and include config files for the specific domains, but this only works inside the individual methods recv etc. Is there a way to include a complete set of instructions, in one file, per domain, without having to manage separate files for subdomain_recv, subdomain_fetch etc? And preferably without running seperate instances of varnish. When I try to include a file on the "root level" of default.vcl, I get a compilation error. Best regards, Michael

  Read the article

• Creepy MySQL error during hard work

  - by Kiewic

  Hi, I have a MySQL database installed on a OpenSuse 11.1 server (it is a Bitnami image). The database works fine, it can stay many days without any error, but when MySQL receives a huge amount of transactions, it dies immediately. The next screen shows the error: Moreover, I don't know how to restart MySQL. I have tried this: /opt/bitnami/mysql/bin/mysqld start But it doesn't work, that gives me the next output: 110209 17:09:01 [ERROR] Fatal error: Please read "Security" section of the manual to find out how to run mysqld as root! 110209 17:09:01 [ERROR] Aborting 110209 17:09:01 [Note] /opt/bitnami/mysql/bin/mysqld.bin: Shutdown complete It doesn't matter which kind of statements are executing, if they are a huge amount, MySQL dies. The MySQL server version is 5.1.30 What can be causing these sudden failures?

  Read the article

• Can you shrink the sparse disk image of a Mac OS X guest OS in VMWare Fusion?

  - by Paul D. Waite

  I use VMWare Fusion on my Mac to run a virtual Windows 7 machine, and the Microsoft IE compatibility Windows XP virtual machines. In VMWare Tools on the Windows guest OSes, there’s a “Shrink” option that lets you reduce the size of the sparse disk image used by the guest OS, to save hard drive space on your host OX. I’ve recently created another virtual machine, this time running Snow Leopard Server. I was wondering if I could shrink the spare disk image used by this machine too, but I can’t find a VMWare Tools app on the Mac guest OS, even though VMWare Tools have been installed (as VMWare’s Shared Folders feature is working). Is there any way to shrink the sparse disk image used by Mac OS X guest OSes in VMWare Fusion?

  Read the article

• Unknown/unsupported storage engine: InnoDB | Mysql Ubuntu

  - by Kayle

  I recently upgraded from the previous LTS Ubuntu to Precise and now mysql refuses to start. It complains of the following when I attempt to start it: ?$ sudo service mysql restart stop: Unknown instance: start: Job failed to start And this shows in "/var/log/mysql/error.log": 120415 23:01:09 [Note] Plugin 'InnoDB' is disabled. 120415 23:01:09 [Note] Plugin 'FEDERATED' is disabled. 120415 23:01:09 [ERROR] Unknown/unsupported storage engine: InnoDB 120415 23:01:09 [ERROR] Aborting 120415 23:01:09 [Note] /usr/sbin/mysqld: Shutdown complete I've checked permissions on all the mysql directories to make sure it had ownership and I also renamed the previou ib_logs so that it could remake them. I'm just getting no where with this issue right now, after looking at google results for 2 hours.

  Read the article

• Is there a way to have a working search bar in Explorer with Windows Search Service disabled?

  - by Desmond Hume

  I had to disable Windows Search Service (turn it off in Windows Features) for the reason that it was constantly using the hard drive in an excessive way (maybe because I've got very large quantities of files on my PC), noticeably slowing down my computer, and the Windows.edb database file grew way too large, about 2.5 GB in size. But the side-effect of it is that now the search bar is gone from any Explorer window and I miss this useful feature. So my question is, is there a way to stop Windows Search Service torturing my hard drive and still being able to search for files and folders directly from Explorer, perhaps using some third-party software?

  Read the article

• How to solve this problem with a 'tuned' prompt in ZSH?

  - by Mnementh

  I have an adjusted prompt in my ZSH-configuration. Main feature is, that this prompt is colored red, so that I can easily it distinguish from the outputs of programs. My prompt is defined as follows: PROMPT=$'\e[0;31m%n@%m:%~> \e[0m' This works mostly fine, but sometimes my cursor switches to another position on tab-completion and some characters are left behind on the screen and mangle up the commandline. That is a little annoyance, but if someone knows a solution for this, I would appreciate it.

  Read the article

• Migrating websites from IIS 6 to Apache Tomcat

  - by Cheeky

  I have 4 CFML coded websites currently running on Railo 3 (CFML engine using Resin) and IIS. I would like to upgrade my server and websites to Railo 4, which no longer uses Resin, but runs on Apache Tomcat. I have quite limited knowledge when it comes to web servers and I wanted to know what the process would be to move the websites from Railo 3 to Railo 4 without disrupting the live sites? Would there still be a need for IIS after the installation of Apache Tomcat? Does Tomcat run through IIS or are they two completely different things and would it be a complete move from IIS to Tomcat? If so, where would one then manage all those things one normally does in IIS, like default documents and host headers etc? Any advice would be extremely appreciated.

  Read the article

• Wake computer from sleep/standby without BIOS support for WOL?

  - by jjeaton

  Just bought a new home server and the nice folks at HP disabled the Wake-On-Lan feature in my motherboard. Are there any other options for waking the computer from Sleep/Standby mode? I'd like to take advantage of power savings wherever I can. I realize that I won't be able to wake it from shutdown, short of putting together some Rube Goldberg machine. EDIT: I'd like to be able to wake the machine on demand, remotely. So I can then RDP into it, or access files, etc.

  Read the article

• Multicasting Windows 7 Image

  - by LawnChairSkank

  I am trying to deploy some new machines with windows 7 for the first time in our computer labs. We used to use third party imaging software and then run sysprep after the image was copied(XP), but it seems you can't go that route with windows 7. We set up a new imaging server with the windows system image manager, but when we try to multicast the image it pretty much takes down our whole staff and faculty network. I heard you can turn on a multicast feature on our cisco switches to help with the issue, but that it also slows the switches to a crawl. Another idea we have tried was pulling the the computer lab switch off the main network and plugging the imaging server directly into the computer lab switch so the multicast doesn't take down our network, but it doesn't seem to work without being able to hit a domain controller. Is there a way to multicast without taking out the network? I feel like I am missing something... Thanks in advance

  Read the article

• Emacs eshell over SSH not obeying key commands or elisp

  - by Brad Wright

  When SSHing to a remote server Eshell doesn't behave very well, e.g: M-x eshell ssh server <tab> *inserts literal tab instead of trying to complete* Hitting <tab>, for instance, inserts a literal tab. Is there no way to get tab completion, lisp interaction (like find-file blah) etc. over SSH? All the documentation I've read says Eshell is "TRAMP-aware", which I assume meant it could deal with this. Am I just wrong in my assumption that it would work over SSH, or is something broken? This is on Emacs 24.0.94 pretest.

  Read the article

• What do you do when you need whole-words search in Firefox?

  - by romkyns

  Example: I am looking to see if "arg" is a special keyword in Lua. I go to the Lua reference manual at http://www.lua.org/manual/5.1/manual.html. I search for "arg". I find hundreds of occurrences of the word "argument(s)" or "vararg". Any ideas? I know Firefox won't implement whole words as a core feature (something about cluttering up the ui... argh...), and I couldn't find a good addon that implemented this well.

  Read the article

• AdBlock Plus Advanced Element Hiding?

  - by funkafied

  I'm trying to block a certain element on a site using AdBlock Plus's element hiding feature. However the problem is that there are two elements with the same exact name and type that I'm trying to hide so there's no way to tell the filter which one to keep and which one not to keep. So I figure there might be a way to hide only the second element by telling it to only hide the second occurrence of an element that matches the filter. Like skip the first one and hide the second occurrence. Or alternatively maybe hide the one that also has a certain other element in front of it. Is there any way to do this? Like regular expressions or something?

  Read the article

• How to rewrite the domain part of Set-Cookie in a nginx reverse proxy?

  - by Tobia

  I have a simple nginx reverse proxy: server { server_name external.domain.com; location / { proxy_pass http://backend.int/; } } The problem is that Set-Cookie response headers contain ;Domain=backend.int, because the backend does not know it is being reverse proxied. How can I make nginx rewrite the content of the Set-Cookie response headers, replacing ;Domain=backend.int with ;Domain=external.domain.com? Passing the Host header unchanged is not an option in this case. Apache httpd has had this feature for a while, see ProxyPassReverseCookieDomain, but I cannot seem to find a way to do the same in nginx.

  Read the article

• Firefox's searchbox clears as I type

  - by User1

  About 30% of the time, when I click on the searchbox and type in a query, it clears everything I typed half way through. For example, if I type "super user", it will clear at "super " so all I see is "user". It seems like something is stuck, but I'm not sure what. It doesn't always happen, but it seems that the auto-suggestions feature is also broken..it never works. I'm using Ubuntu 10.4. Any ideas on what could be wrong? Here's my version info: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.3) Gecko/20100423 Ubuntu/10.04 (lucid) Firefox/3.6.3

  Read the article

• Multiple foldmethods in vim

  - by bjarkef

  I use the folding option of vim quite a lot, and have usually set foldmethod to syntax. Recently I discovered that it is possible to add custom folds, such that I can put whole blocks in /*{{{*/ and /*}}}*/ which is very useful for grouping large sections of a source file together. However to use that feature I need to set foldmethod to marker, and I loose the syntax folding. Is it possible to have two active foldmethods at the same time in vim? set foldmethod=syntax,marker does not work.

  Read the article

• what Windowx XP LAN driver for Asus F5Z

  - by Radek

  a friend of mine asked me to re-install his Asus F5Z notebook with Windows XP. I installed succcessfully all drivers from assus driver download site. Everything is working fine but ethernet driver. The installation of Lan Driver for WIN XP finishes with strange message "Please shutdown & plug Realtech PCI-e card to complete the installation. Not sure if it matters but OnChip SATA is in 'Native IDE' mode . The original one with Vista was 'IDE - AHCI mode'. Any idea how I can make the LAN adapter to work under Windows XP?

  Read the article

• Managing self-updating Windows software in GPO-deployed packages

  - by Paul

  Being very new to Windows software distribution for a small network (<50 clients) I was wondering how software packages like Adobe's Reader or Java are handled. I can deploy them as MSIs via group policies just fine. But what happens when the client software detects updates? What are common ways to handle this? Disable the software's autoupdate feature? Redeploy when the admin detects a new version? Just fishing for knowledge, thanks for any hint.

  Read the article

• Can't reinstall Office 2010

  - by Sniffer

  I had Office 2010 Professional Plus installed on my Windows 7 (32 bit machine), then I decided to remove it and install the 2013 version. I went to Programs and Features and removed the software as always, everything went successfully and it asked me to reboot the machine in order to complete the un-installation process, and when I clicked reboot a message suddenly appears telling me that an error occurred during un-installation and the system restarts instantly before I get a chance to see the error message. After that I tried to re-install Office 2010 but after the installer seems to have finished, it tells me that the installation failed without an explanations ? I have taken a look at the event viewer and there is some error saying the office protection platform service failed to start, could this have anything to do with the problem? What could be the cause, how can I fix this ?

  Read the article

• Hyper-v vs Virtualbox

  - by user53864

  I am using Oracle VirtualBox for ubuntu guest virtual servers on windows server 2008 R2. I'm in a plan to migrate(stop using virtualbox) from VirtualBox to Hyper-V. I guess many are using hyper-v virtualization and have good control over it and could help me here in clarifying few things. The reason I use Virtualbox is it's open source and the reason for migrating is that if hyper-v support any additional feature which virtualbox doesn't(and I couldn't migrate VBox vms along with all the snapshots). I have following questions to get it clarified. Does hyper-v require any licence or is limited to running particular number of virtual machines?. Is hyper-v capable to export/import VMs along with all the snapshots? Is it possible to run HeadLess VMs like it's done with VirtualBox? Does hyper-v recognize VDI/VMDK? Anybody can suggest me anything?. Thanks!

  Read the article

• A button to set all processes to on-hold for Linux?

  - by fuenfundachtzig

  When Linux starts swapping you're basically doomed. Very soon the system won't react to any input any more, but happily swap on until the end of days... Can you think of a command that holds all processes whatsoever, thus (and while) allowing you to open a clean shell where you can examine the source of the problem and kill the process which ate up all the memory? (I guess this won't be easy, because as the memory is probably completely filled up you'd need to swap out some more memory to gather space for opening a shell, on the other hand all other swapping processes must be stopped.) If you tied such a command to a hot key then maybe you can use this as an emergency button saving you a lot a time. Any ideas if this is possible at all? Has somebody tried something like this before? If one could realize this it would be a cool feature :)

  Read the article

• Drag lock crisis with Windows 7 and Apple Magic Trackpad

  - by rockinthesixstring

  This is driving me insane and I've scowered the web for two days trying to fix this. I just picked up an Apple Magic Trackpad to be used exclusively on a Windows 7 PC (not apple with bootcamp). I found a nice driver that got it working right away, but when I'm moving the cursor around the screen, often it will begin "highlighting" text, or picking up and dragging things I don't want it to. I looked in the "regedit" where people are saying there is binary that can be changed, however the driver I installed doesn't use the binary being suggested. Can anyone suggest a better driver for my situation or a way to disable the drag lock that is driving me so nuts? I don't mind not being able to lift my finger when dragging, it's a far better compromise than having the insane feature.

  Read the article

< Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >