Search Results

Search found 19606 results on 785 pages for 'the thing'.

Page 357/785 | < Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >

• have 2 exchange servers to communicate together!

  - by Data-Base

  we have our exchange server 2007 (10.10.2.11) at work with domain "dddddd.com" and ironport and it work just fine! we need to test some thing at work with Exchange 2010 !! so we came up with this idea: we created a locked network and install firewall (10.10.2.88) the locked network has it's own DC and Exchange servers! we used the domain "dddddd.loc" any way it will be deleted! IPs DC 10.0.0.1 EX 10.0.0.11 now the Exchange server up and running in the firewall (10.10.2.88) we opened the ports and forwarded it to the Exchange2010 (10.0.0.11) in our main DC we defined the zone dddddd.loc to the firewall and the MX records as well but when we test we get error now how to make it so that the 2010 will send email directly to the 2007 (we will not use it to more that that)? and the 2007 will send the email to 2010 if the email has the domain dddddd.loc ?

  Read the article

• How to host my own cloud so that videos are viewable via desktop web browser?

  - by jake9115

  I want to host my own cloud storage solution, something like Dropbox but entirely dependent on my own central machine. This way things are more secure if setup correctly, and there are artificial storage limitations or pay-walls. Some thing similar to ownCloud: http://owncloud.org/ There is one important feature I want to have: the ability the stream movies in a web browser from my personal cloud to anywhere in the world. In the past I tried this with a NAS, and I mapped XBMC to the NAS via SFTP, and certain media types could stream in this manner. I've also used things like PLEX. In this case, I am looking for a single solution for personal cloud storage and movie streaming from that cloud into a web browser. Does anyone know if this can be accomplished? Thanks for the suggestions!

  Read the article

• One of my VMs went boom using Virtual Box and how it got fixed

  - by Enrique Lima

  I am running an HP Envy 15, 16GB and 500GB (7200 RPM) Hard drive. Had a VM configured from another environment, created the virtual machine config file on Virtual Box, everything seemed ok. Fired it up, and it was  s   l   o   w, it took close to 10 minutes for it to load, and about 5 more to see Windows was in the process of loading before the BSOD.  Thought, maybe, just maybe it will not happen again … oh was I wrong. Frustration had already hit an all time high with this configuration and the number of issues I’ve had. How I did the troubleshooting … The best thing to do (IMO) is to step back, and gather your tools to debug this situation. Tools:  Virtual Box command line tools, Windows Debug. Virtual Box comes with a pretty good set of tools to examine, migrate and overall tasks to deal with VMs. The firs step:  use VBoxManage to prevent the VM from rebooting after the error to get enough time to really dig into the BSOD issue. Command used:   VBoxManage setextradata VMNAME "VBoxInternal/PDM/HaltOnReset" 1 Once this was done, the error reported was an “Inaccessible boot device” coming from a “Stop – 7B” type of error on the BSOD. The issue I had with this, my VM was configured to use a virtual SATA controller, and thought Windows 2008 R2 would handle this fine … again wrong!  Because the integration tools from the other product where wanting to take effect that was throwing everything off. The fix The fix was almost handed to me, edited the configuration for the VM, removed the SATA controller from it, added the virtual hard drive under an IDE controller, boot up and voilà … it works! I was then able to install the Virtual Box guest tools and such, but have decided to favor “keep on working” over “let’s try SATA again”

  Read the article

• Video Bug after a fresh installation

  - by Matan

  Hello, I just installed Ubuntu 10.10 (I'm brand new to Ubuntu) on my laptop. I seem to have a video bug that I don't know how to deal with. When the log-in screen comes up, the boxes are way off in the corner of the screen (partially off it). When I enter my password, the screen goes black for a few seconds, then returns to the login screen. I can open a Terminal window and enter my login info that way. When I go back to Gnome (Ctrl+Alt+F7 or whatever) it shows me as "logged in" but I still can't get to the desktop. If anyone has any advice, I'd love to hear it--just try to use simple language, please, since I really don't know Linux at all yet! I'm running an Averatec 3700 Series: Mobile AMD Sempron 3000+ 512 MB DDR, 80 GB HDD After looking at this question I tried going in through Failsafe mode (took me a while to figure out the hold-shift-while-booting thing _<) and playing around with the resolution. Setting a somewhat wider resolution did seem to fix things so that I can log into regular GNOME, I think. I'm not sure if this fix will persist, but it seems like it might!

  Read the article

• Arch Linux doesn't mount two USB drive?

  - by unixbhaskar

  One is USB modem which is connected and working and problematic one is a plain vfat USB stick which contain data ....that is the fellow not mounting :( I have tried to see it by fdisk ....it doesn't mount autometically... Is there any UDEV rule for that?? Because I have put a udev rule to remove the usb-storage thing( I had to.. otherwise the usb modem wont get connected... it waits for storage to relase the port) Any idea and solution would be greatly appreciated PS: I am running Arch distribution. Thanks

  Read the article

• Acer Aspire 5532 crashes with no warning

  - by keenan

  I have an Acer Aspire 5532. I don't have more specs off the top of my head but from what I've looked up it has all the factory stock stuff in. My keyboard is completely shot and doesn't work at all. It was working fine for quite a while, however I go to get on it Thanksgiving night and all of a sudden it just crashes with no warning. I try to restart it and it beeps 3 times with about 15 seconds in between each beep. After that it will go to start up and get to the log in screen, and about 3 minutes later it will crash again with absolutely no warning. The same thing happens every time I try to start it up. I've taken it completely apart and cleaned the fan and all the airways. I made sure all the connections are good (or at least all the ones that I can get to above the mother board), put it back together and I get the same problem.

  Read the article

• How to select a user and remove all groups they are a member of using Powershell (with Quest)?

  - by Don

  I've read quite a bit online about this and thought I had found a solution, but it doesn't seem to be working like I would expect. I am wanting to get a user based on the username I input, then remove all groups that it is a member of. Basically the same thing as going into ADUC, selecting the user, selecting the Member Of tab, highlighting everything (except domain users of course) and selecting remove. Here's the command I'm trying to use: Get-QADUser -Name $username | Remove-QADMemberOf -RemoveAll Others have said online that it works for them, but so far it hasn't for me. It doesn't give an error, it accepts the command just fine, but when I look in ADUC, the groups are still there for the user. Any suggestions as to what I may be doing wrong? Executing from Windows 7 with domain admin rights, Exchange cmdlets and Quest snapin loaded. Thanks!

  Read the article

• No wireless adapter in msi u200

  - by Mino Marimat

  I have a MSi u200, and the weird thing was that I was using this normally before, then after a few minutes all of a sudden it couldn't find the wifi signal from my house. I did some troubleshooting and a bit of search in the control panel, and it seems like my hardware is missing. :( I can't even turn on the wireless light using Fn+F8, so my suspicions about the missing hardware strengthened. I tried searching for DIY fixes, but I found out that the wireless card is actually built-in deeper, unlike the RAM cards and the hard drive where you can either replace or add more cards. What do I do?? As of the moment, I can get connected to my wifi here at home using a wireless adapter via usb, and it's working. So my guess about the hardware problem seems correct. HELP!!! Thanks!

  Read the article

• Remote Destkop into Server 2008R2 with Firewall On

  - by Eternal21

  I've got a fresh install of Remove Server 2008 R2, 64 bit. The problem is I can't Remote Destkop into it. I clicked 'Enable Remote Desktop' inside 'Initial Configuration Tasks', and set it to: Allow connections only from computers running Remote Destkop with Network Level Authentication (more secure). The thing is, this used to work just fine, and then it stopped. The only way I can get it to work now is if I turn of Windows Firewall completely off (Public network location settings). Obviously I don't want to run the server with firewall off, so what specific settings in Firewall do I need to disable, or am I doing something wrong?

  Read the article

• Cannot connect Solaris 10 to Windows 7

  - by user999353

  I'm trying to connect a Solaris VM (powered by VMware Player) to Windows Explorer in Windows 7. When I try to map the network drive I get the following: The specified server cannot perform the requested operation. I am using the following URL which has worked on a machine I used before. The only thing that has changed is the IP address of the Solaris machine. I am able to connect to the VM via putty. \\1.2.3.4\xxx\yyy I checked and I think samba is running.. root 375 1 0 09:53:39 ? 0:00 /usr/sfw/sbin/smbd -D root 376 375 0 09:53:40 ? 0:00 /usr/sfw/sbin/smbd –D Anyone any ideas?

  Read the article

• Chrome sending of packets to random destinations upon reconnect/disconnect

  - by f0x

  Noticed an interesting thing whilst debugging one of my websocket applications that Google Chrome will push out 3 http requests upon a network connection status changing; Quite disconcerting and looks almost as if some malware is checking out to a random server. I don't quite understand the why though since they all return a 502 or have no response code at all since the destination does not exist. On Disconnect: Reconnect: I guess the main question is this normal and what the use is; howcome they wouldn't go for a dns lookup that actually exists?

  Read the article

• How feasible is it to setup a FreeNAS to be more like a full install of FreeBSD

  - by mmccoo

  So I've been playing with FreeNAS over the last week, finally trying to get my act together and store my important files properly. I'm finding myself wanting to install and compile additional packages. pkg_add has been great for some things, but it appears that my install is rather crippled. make is missing. I installed gmake and linked make to that. math.h is missing as is sys/cdefs.h I thought these are part of any core unix/linux system? cc is missing though I've installed gcc45. I'm used to having just gcc. Sure I can create a link, but I'm not sure this is the proper thing to do. perl installed fine, but I can't add stuff with cpan. This is how I discovered 1,2, and 3. So my question is this: do I just need to bite the bullet and install a full FreeBSD? The web interface to FreeNAS is kinda nice

  Read the article

• Exchange 2007 OWA not listening on SSL port

  - by krs1

  I have an Exchange 2007 server that went down after a power failure. It has OWA access via SSL both externally and internally. OWA is working fine from the internal notwork, however I am getting a timeout when I attempt to connect externally. I pulled up wireshark and noticed that the server actually redirects to SSL. For some reason the server is not listening on the SSL port, and this seems to be causing the timeout. I normally do only development work, but I'm stuck with this since my sysadmin took off for the week and isn't answering my phone calls. As far as I know it shouldn't be a firewall issue. Aside from me not wanting to work on the damn thing, what should I look for?

  Read the article

• error: no such partition. Grub rescue

  - by user1440731

  I deleted Linux (Ubuntu) partition from windows Ii forgot to repair mbr. The thing is I don't have my windows boot CD with me now and not CD drive. so the solution I needed is that is there any small utility software that can be easily downloaded (I knew about hiren CD but that's about 500 MB and I don't need that whole stuff) and can work through USB? Also explain steps to perform. Thank you UPDATED: Any small Linux live CD can also b taken into consideration as i can boot that on USB using pendrivelinux software

  Read the article

• Thunderbird 3.0 - how to prevent new message indicator from clearing?

  - by Joe Casadonte

  I just installed Thunderbird 3.0 and there are a few things driving me batty. When new email is delivered it has a faint star to the left of the subject (this is different than the new star column thing). In the old days (i.e. last week) the new message indicator wouldn't go away until I read the message or left the folder and returned. Now, as soon as I do anything with any email message, all new message indicators are cleared. How can I go back to the old behavior?

  Read the article

• Lost all non-linux hard drives

  - by Rick

  I've somehow lost access to all my non-linux drives. I'm not sure how. I have two other hard drives set up (a windows boot and an external usb I was using under windowsxp). A few days ago I could access both under linux with no problem. Now, I see them listed under media, but when I click on them, nothing is there (same thing happens when I go there in a term window). Now, the computer (under linux) sees them, but I can't see anything in them. (in nautilus it shows "(Empty)") Any ideas what happened or how to get access to them again? My guesses as to what might have caused it: -I was trying to set up AdobeAIR (unsuccessfully) and had to make and remove a couple of symbolic links. Never got that to work but maybe links I made or removed did something? -I was also trying to set up nautilus so that I could enter it with sudo permission. I also didn't figure out how to do that successfully, but maybe something I did while trying messed it up? (I think I installed and uninstalled nautilus-actions configuration tool). Note: I'm working on a relatively new install of 12.04

  Read the article

• Server service fails to start, event 7023, error 1079

  - by toffitomek

  Hello, Environment: Windows Server 2008 R2 fully patched, working as Domain Controller in Win 2003 native domain. Users started to report problems with share, it turned out that server service won't start. I've scrambled google but can't find a thing. Any ideas will be appreciated. Thanks in advance :) Service fails to start, then when starting service I get: Windows could not start the Server service on SERVERNAME. Error 1079: The account specified for this service is different from the account specified for other services running in the same process. In System Event Log: Event 7023 The Server service terminated with the following error: The account used is a server trust account. Use your global user account or local user account to access this server.

  Read the article

• Will an SSD help prevent laptop overheating?

  - by alex

  My laptop has a severe overheating problem, even though it's quite new (< 6 month). It's still regularly overheating to the point where it shuts down. This usually happens while playing games but sometimes while watching videos or using Skype video calls for a long time. I'm already keeping it mid-air on a cooling tray with 2 external coolers, but that doesn't seem to help. The only other thing I can think of is installing an SSD instead of the current HDD. I've read up that they generate less heat then hard drives, but can it actually make a serious difference to the heat level of the laptop? If there are any other suggestions, please feel free to comment. The laptop is a Toshiba Satellite L650D-11R.

  Read the article

• redirecting HTTPS requests to http in lighttpd

  - by chochim

  I have a lighttpd server running which has an SSL certificate installed. I would, due to certain reasons, like to forward all https: //www. requests to http: //www. My lighttpd code looks like as follows: $SERVER["socket"] == ":443" { ssl.engine = "enable" ssl.pemfile = "/path/to/pem/file" ssl.ca-file = "/path/to/ca/file" HTTP["host"] =~ "^www\.(.*)$" { url.redirect = ("^/(.*)" => "http://www.%1$1") } } Can you please point out the problem here. Another thing, what is the difference between %1 and $1 ?

  Read the article

• How to migrate Notepad++ settings?

  - by NoCatharsis

  I am trying to portabilize every program I use if possible, and Notepad++ is on the list. The only problem is that I've had a native installation until now so that I'm not totally sure which settings files need to be moved to the portable directory. Surely there's a function tucked away somewhere in NPP exactly for this purpose, or some plugin out there? I mean the developers have literally thought of everything else, yet this is the one thing I cannot find specifically anywhere in the NPP wiki or otherwise, and I don't want to miss an important file. Here is the closest I've gotten: Notepad++'s configuration files and Where are all the files? Should I just copy every configuration file listed on the first link?

  Read the article

• USB 3.0 Device not detected in Windows 8

  - by Tek

  About my setup: Windows 8 64-bit. X79-UD3 Motherboard. Latest Windows 8 USB 3.0 Drivers from motherboard manufacturer website. All right so device manager detects my USB 3.0 ports, so all is well there. However when I plug in my external USB 3.0 hard drive, windows doesn't even make a beep; the hard drive is not picked up by device manager at all. The SAME thing happens with Ubuntu 12.10 BUT adding PCI=nomsi (as a workaround) to the Grub command line of the Ubuntu boot option makes Ubuntu 12.10 detect my external hard drive. I also have a few other doubts, if you guys would be kind enough to answer them that include: Should XHCI hand-off in the UEFI bios be enabled or disabled for Windows 8? The difference between XHCI hand-off and EHCI hand-off and what are it's effects on USB 3.0 functionality? And last but not least how can I get Windows 8 to recognize my external hard drive when Ubuntu 12.10 (after the Grub workaround) works fine?

  Read the article

• Boot failure on Ubuntu 11.04

  - by B Seven

  I was using my laptop with Ubuntu without problem for a few months. I did not update any software or install any OS updates. This morning when it started, I got error: no such device:.... error: no such disk error: you need to load the kernel first. Press any key to continue... Then takes me back to GRUB menu. Both Ubuntu option and recovery mode option show the same thing (above). What does this mean? How do I fix it? Since I did not install anything new, does it mean the SSD is dying (again)? How to check the SSD to and fix any file system errors? Ubuntu 11.04 EDIT: Just remembered something: when the system was shutting down, it did not turn off. There were a bunch of weird output statements, and I assumed the system had shut down so I turned it off with the power button. Perhaps something got corrupted because of that.

  Read the article

• Why can a network address not be a valid host address?

  - by Goblinlord

  So... I have studied for CCNA and such and been working with IP networking at the least the past 8 years or so. I have always seen and been told that the network address for a subnet is not a valid host address. Now first I will start by saying I know this is true. My question is more... is there a technical reason it can not be used or was it just arbitrarily agreed upon when the specification was designed? I understand why a broadcast address can not be used (because it is ACTUALLY used). The thing is when I see a network address used it is normally only in routing which is specifically using NETWORK addresses. This being the case, (network addresses being used only when you are expecting a network address) is there some technical reason that they could not have the network address be an actual valid host address?

  Read the article

• Chrome logs me out of everything when I exit--tried cookie-related stuff already

  - by GreatBigBore

  I've been using Chrome very successfully for a long time. It has always kept me logged in to all my sites even after exiting the app. Recently it started logging me out of everything when I exit Chrome. I've fooled around with all the various advanced cookie settings, and I've cycled through the options hoping that Chrome just needed a wakeup call or a reset or something. I've also deleted all the cookies in case a corrupted one is confusing Chrome. Nothing works! I see cookies when I log in, but they all go away when I exit Chrome. I've searched all over the place and seen only the standard answers relating to resetting cookies, local data, sessions, that sort of thing. Any Chrome gurus out there, please send a telepathic message to my browser asking it to resume its previous excellent behavior. Alternatively, you could suggest other possible solutions.

  Read the article

• Local Profile Map to New Active Directory Login

  - by user42937

  Preface: I am sure this has been asked some where on the site before but I couldn't find any questions about it, or maybe I am not using the correct verbiage... Our admins are giving us a new active directory account on different domain. As I am a progammer (a member of IT) we are the group gets assigned new accounts first to test the migration. When I log in to my local machine using the new account I get a new local profile. Not the biggest deal, but on the new profile I am missing mappings, desktop items, wallpaper, etc. Our users I going to throw a fit if there is no way around this. Two Questions: I've seen references to NTUSER.DAT and suggestions to Copy all user files from "Documents and Settings", but is there a good way or is it even possible to associate my local profile with the new AD account? Is there any thing that our admins can do to prevent this from happening?

  Read the article

< Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >