Search Results

Search found 28620 results on 1145 pages for 'ubuntu newb'.

Page 357/1145 | < Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >

• RAID 1 after install and two controlers

  - by jfreak53

  I have question regarding RAID 1. Can I setup software RAID 1 after having installed the first drive and setup ubuntu 12? I know that during server install and partitioning I can select RAID and setup then, but what I am not clear on is how in the world to setup RAID 1 after the fact? Can someone provide directions for this? Also, can I RAID 1 two drives one being 500GB and the mirror drive being 1TB? Of course the mirror drive would have a 500GB partition but that's my point. Lastly, can one drive be on IDE and the other on a SATA controller? I know speed will be an issue, that doesn't matter, I just need to know if it will work without corrupting data and if it's the same process? Thanks.

  Read the article

• Package temperature above threshold, cpu clock throttled

  - by drN

  I am running 64 bit Ubuntu 11.10 on an i7 with 8gigs of ram. I thought of putting this on askubuntu.com but decided that maybe the question has a much broader appeal. I have the following error message popping up when I run math simulations. CPUn: Core temperature above threshold, cpu clock throttled (total events = xxxxxxx) CPUn: Package temperature above threshold, cpu clock throttled (total events = xxxxxxx) I realize that this is a hardware warning message (machine check exception, correct me if I am wrong). How do I turn these messages off? Since it doesn't seem to have a detrimental effect of my calculations or my computer (presumably), I don't like it cluttering up my virtual console screen with hundreds of these messages.

  Read the article

• force connection using USB adapter

  - by James

  Hi all I am new to Linux, so even though this is probably a simple problem it remains unsolved after more then 3 hours of googling :-( I run running ubuntu 10.04 LTS on an Acer Aspire 5520G . the laptop has a wireless adapter, but since I wanted better range I got an Edimax EW-7711USN USB adapter. now , when running ifconfig I am able to see both adapters where as the laptop native adapter is listed as wlan0 and the usb adapter is listed as wlan1. but listing available networks from the wireless network applet , all the connection are listed under wlan0 , the usb adapter is costencly listed as disconnected. this is what I have been trying to do so far 1) ifconfig wlan0 down - I got disconnected from the net but still was not able to get the usb to connect 2) used the wireless connection dialog to connect to a hidden network with the usb adapter - I was able to connect to the network but with no Internet access 3) disable wireless using the laptop function button - both wireless adapters where disabled can anyone suggest a way to connect to to the wireless network using the USB adapter rather then the built in one ? Thanks

  Read the article

• How do I permanently disable Linux's console screen saver, system-wide?

  - by raldi

  I've got an Ubuntu server that boots up in text mode. It rarely has a screen or keyboard attached to it, but when I do attach a screen, I usually have to attach a keyboard too, because the darn console mode screen saver will be on and I'll need to hit a key to see what's going on. I'm aware that the setterm command can disable this, but it's a per-session thing. How can I make it so the machine never ever blanks the screen in text mode, even when it's first booted up and sitting at the login prompt?

  Read the article

• what to use instead of laptop-mode?

  - by playcat

  hello, i have ubuntu 10.10 64bit on hp 6735s (turion processor). it overheats, and i'm forced to use turion power control in order to keep core temperature to a reasonable level. one more measure that i use is putting my processors to conservative mode. that way, i'm perfectly happy with its performance, and heat is where it should be. however, after my latest upgrade, something happened - cores are back to ondemand by default, and i'm not sure if turionpowercontrol is working any more (ps axu | grep urion shows no process). in addition, i read somewhere that laptop-mode uses hdd spindown for preserving data/energy, and that hdds have only a limited amount of those spindowns, so laptop-mode usage can actually shorten the life of my hdd. i'm wondering if there is a good way to set my cores to automatically go to conservative mode? also, what's the good way to see what is the voltage my cores use? on windows i use cpuz tools. thx and sorry for the long explanation.

  Read the article

• Write hash password to LDAP when creating a new user

  - by alibaba

  I am working on a project with a central user database system. One of the requirements of the system is that there should be only one set of users for all the application. FreeRADIUS and Samba are two my applications that both use LDAP as their backend. Since users must be the same for the entire system that contains many other applications, I have to read the list of users from the central database and recreate them in the LDAP directories for Samba and FreeRADIUS. The problem is that users are sent to me from another entity and I can save them in the database with their hash passwords. I don't have access to their cleartext passwords. I am wondering if I could enter directly a hash password for a new user in LDAP with my preferred hash mechanism. If not, can any one tell me what strategy I have to use? I am running my server on UBUNTU 12.04 and all other applications are the latest versions. My database system is PostgreSQL 9.2. Thank you

  Read the article

• Computer not booting, black screen, no beeps

  - by Michael Gaddass

  I bought a pre-owned computer on Ebay. It booted fine, had to reset due to it not detecting USB mouse, but it detected the USB keyboard. Booted fine again, then I tried to install Ubuntu Desktop, when it was installing I got a phone call, when I'm answering it, I find a Blue screen of Death. I reboot the computer and nothing, no BIOS boot, no beeping, but one of the fans was on. I opened the cover and found a large amount of dust, removed it, still not booting. I'm a complete novice with computer repairs, the most advanced thing I did was take a 286 harddrive and replace a 486's damaged harddrive with it (put the drive into the 486 that is), what could possibly be causing this?

  Read the article

• Mark packets across computers?

  - by eudemo

  I use Transmission on Ubuntu and I'm having this issue, which basically says that QoS is broken because there is no way to limit which outgoing ports uses. I was thinking of doing a dirty and ugly hack and create an interface alias and define QoS based on source address, but was wondering if is there another way. Is it possible to mark the packets on the original machine in some way, using the owner and mark modules of iptables and sending this to the router who does the QoS? From what I understand, mark on iptables only applies to the local machine, so this will not work, but is there another way?

  Read the article

• Shell Script to Start Mysql Server if not running

  - by user103373

  I have written a shell script to start mysql server & send a mail to admin user if it's restarted via shell script. What i am facing an issue if I run this shell script on terminal it's work perfectly & If same script runs via cronjob it's only sending the mail to the user & problem remains same. Is this problem relates to permission & how can i resolve it. Shell Script-------- #!/bin/bash EMAIL="[email protected]" SERVICE='mysql' if ps ax | grep -v grep | grep $SERVICE > /dev/null then echo "$SERVICE service running, everything is fine" else echo "$SERVICE is not running" /etc/init.d/mysql start cat <<EOF | msmtp -a gmail $EMAIL Subject: "Alert (Test Server) : Mysql Service is not running (Manually Restarted)" Mysql Server Restarted at: `date` EOF EXIT I am using msmtp for sending mail to the user on ubuntu 12.04 Server.

  Read the article

• How to remove a directory which looks corrupted

  - by hap497

  Hi, I am using ubuntu 9.10. And I only directory, it shows as '?' for user/ownership. How can I remove it? -rw-r--r-- 1 hap497 hap497 1822 2010-01-28 22:48 IntSizeHash.h d????????? ? ? ? ? ? .libs/ -rw-r--r-- 1 hap497 hap497 194 2010-02-25 12:12 libwebkit_1_0_la-BitmapImage.lo I have tried "$ sudo rm -Rf .libs rm: cannot remove `.libs': Input/output error" Thank you for any pointers.

  Read the article

• How could all of my hard drives fail at once?

  - by Taylor

  I have an Ubuntu 13.04 server. Today I found the box had crashed. I restarted it, and now every single hard drive's partition table is missing. (1 SSD for /boot, /, and 3 2TB drives for RAID). I have the SSD connected to a laptop VIA USB-SATA cable, and sure enough, the partition table is missing. This tells me that the Motherboard / SATA controller / software actually broke the drives, not that they just can't be read correctly. Something similar happened to only the SSD a few months ago, and I was forced to just re-partition it. How the heck could his have happened? Bad Motherboard or SATA controller?

  Read the article

• Postfix not receiving non-local mail

  - by Davis Sorenson

  I set up a server with Postfix/Dovecot on Linode/Ubuntu 10.04 according to this guide, admittedly I've never done this before. Local mail works just fine, but trying to send email to it from external addresses results in errors like this: Delivery to the following recipient failed permanently: <address>@ni-mate.com Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 553 553 Unknown recipient. (state 13). I honestly have no idea what to do or which configuration files/logs anyone needs to see.

  Read the article

• Multiple network cards, controlling where my traffic goes

  - by thefinn93

  This is an Ubuntu 12.04 server install. I have multiple network cards, eth0 and eth1 lets call them. eth0 is connected to the internet, and all of my traffic goes through it, until eth1 gets plugged in. Then the machine tries to send everything through eth1, which for various and sundry reasons does not go out to the Interent. The only traffic it doesn't send through eth1 is traffic on eth0's subnet. It also will not accept inbound connections on eth0 from outside of eth0's subnet. I'd like all outbound traffic to go out eth0, but I'd like incoming connections from to either card from any subnet to work.

  Read the article

• ImageMagick convert to png32, can't change background at all

  - by Doug

  So I'm stumped. I've been wrestling with this simple command to turn an SVG file into a transparent SVG to no avail. Here's my command convert svg:/home/media/svgTest.svg -quality 100 -background none -size 3300x3300 png32:/home/media/pngTest.png The PNG comes out fine, but the background is white. Upon further investigation - the PNG's background is white no matter what I set the -background option to. I've tried black, tomato4, and even various hex colors. Nothing - just white. My SVG has no background fill layer or anything like that, it's just a couple of blue path layers. Also, I am running ImageMagick v 6.6.9-7 on Ubuntu 12.04 Lts What am I doing wrong? Thanks

  Read the article

• How do I permanently disable Linux's console screen saver, system-wide?

  - by raldi

  I've got an Ubuntu server that boots up in text mode. It rarely has a screen or keyboard attached to it, but when I do attach a screen, I usually have to attach a keyboard too, because the darn console mode screen saver will be on and I'll need to hit a key to see what's going on. I'm aware that the setterm command can disable this, but it's a per-session thing. How can I make it so the machine never ever blanks the screen in text mode, even when it's first booted up and sitting at the login prompt?

  Read the article

• What is the `shadow` group used for?

  - by Shtééf

  On my Ubuntu 9.10 system, there's a shadow system group. There does not appear to be any user assigned to this group at all. The only files that I can find belonging to this group are /etc/shadow and /etc/gshadow. I'm aware that the purpose of these files is to store the passwords separately, out of reach from regular users who still might want to access passwd for other reasons. But what is the purpose of the shadow group? The reason I'm curious about this, is because I'm thinking about configuring nsswitch.conf to store it elsewhere, and would like to know if anything is actually trying to access the shadow database using shadow group credentials.

  Read the article

• Linux freezes every few seconds

  - by Zeppomedio

  We're having an issue where one our Linux boxes (Ubuntu 10.04 LTS, running on EC2 with a quadruple-large size, 68GB of RAM and 8 virtual cores with 3.25GHz each) freezes up every few seconds. Typing in an ssh session will freeze, and running strace on one of the Postgresql processes that's running usually shows: 02:37:41.567990 semop(7831581, {{3, -1, 0}}, 1 for a few seconds before it proceeds (it always gets stuck at that semop). OProfile shows that most of the time is spent in the kernel (60%) versus 37% in Postgresql. The result of these halts (which began suddenly a day ago) is that load on the box has gone from 0.7 to 10+, and causes our entire stack to slow done. Any ideas on how to track down what's going on? iostat doesn't show the disks being particularly slow or overloaded, and top shows user cpu % spike from 8% to about 40% whenever these back-ups happen.

  Read the article

• Tool to track bandwidth by domain name?

  - by Grant Limberg

  I'm running an Ubuntu 10.04 server that hosts several domain names. All domains point to the same IP address and use the same network interface. I'm really only concerned with the main domain name such as my-domain1.com and my-domain2.com. It should include subdomains such as www.my-domain1.com with the totals for my-domain1.com. Is there a tool out there that is configurable to track bandwidth usage on a per-domain name basis? Edit: I'm not looking for only web usage. I'm looking for all traffic.

  Read the article

• VMware Player 5.0 or VMware Workstation 9.0 after upgrade to Ubuntu 12.10

  The upgrade process Upgrading Ubuntu 12.04 to latest version 12.10 - aka Quantal Quetzal - is straight forward and you only need to follow the offical upgrade instructions. Short version on the console looks like this: sudo do-release-upgrade This will update the repository entries, and start the upgrade process. After some minutes or hours of download and installation, you have to reboot your system once to get the new kernel loaded. As time of writing, I'm on '3.5.0-17-generic'. And as with any modification of the kernel version, you have to compile the necessary kernel modules to get VMware Player or Workstation up and running. Usually, this happens the first time you try start your VMware software and that's it. Well, again not so this time. Getting the kernel patch Luckily, the community over VMware is very active and you can get a new kernel patch in the online forums here. Get the download and put in a folder have write permissions. Then you extract the archive on the console like so: tar -xjvf vmware9_kernel35_patch.tar.bz2 Then you change into the newly created folder: cd vmware9_kernel3.5_patch/ And you execute the available shell script as root (superuser) like so: sudo ./patch-modules_3.5.0.sh This will stop any running instances of VMware software, patches the source files and runs the compile process for your active environment. This might take some time depending on your machine, and once completed you can start VMware Player or Workstation as previously. In case that you are going to apply the patch again, the script will simply quit with the following output: /usr/lib/vmware/modules/source/.patched found. You have already patched your sources. Exiting You might remove the .patched file in case that you upgraded/changed your kernel and you need to apply the patch again. Disclaimer: The patch is "as-is" and the patcher is originally created by Artem S. Tashkinov, and later modified by An_tony. Please refer to the VMware forum in case of questions or problems. There are also patches available for older versions of VMware Player or Workstation.

  Read the article

• Forward public port to localhost

  - by Dan

  I have a process running on my Ubuntu 12.04 server that insists on binding to a public IP address. I only want it accessible from localhost, and NOT the outside world. I've been trying to work out a way to forward 1.2.3.4:8888 to 127.0.0.1:8888. I saw something about iptables not wanting to forward connections to loopback, and I haven't been able to make it work with xinetd either. It's also important that the connection not only be available on localhost, but be inaccessible on the interface it's trying to run on. Is this even possible?

  Read the article

• Synergy configuration with multiple X screens

  - by Rob Drimmie

  I'm having a problem figuring out how to configure synergy to behave on a system with multiple X windows. On my desktop I am running Ubuntu 10.04 LTS. I have two monitors, setup as separate X screens by preference as well as to enable me to rotate the left-hand monitor. I also have a laptop, which I have on the desk in front of me, lower than the other two monitors. I have a very simple synergy.conf: section: screens desktop: laptop.local: end section: links desktop: down = laptop laptop: up = desktop end It works, but on the desktop only on whichever screen I run synergys from in terminal (I haven't set it up to run at startup yet because I've been playing with the configuration). I can't find any information how to reference multiple screens on one system, and would appreciate any help.

  Read the article

• one share include more shares in diffrent premission

  - by saber

  hi all ubuntu 8.04 \ samba I want at the opening share \my_host there was the directory in which will be catalogs with different rights (eg the user with the IP is allowed to write only in one directory) example \\my_host\folder --\folder1 -user_ip1 can write to folder --\folder2 -user_ip2 .... --\folder3 my smb.conf [filials] path = /var/filials comment = No comment ;admin users = nobody ;directory mask = 755 ;read only = no available = yes browseable = yes writable = yes guest ok = yes public = yes printable = no share modes = yes ;locking = yes [filials\user1] path = /var/filials/user1 comment = No comment ;admin users = nobody ;directory mask = 755 ;read only = no available = yes browseable = yes writable = yes guest ok = yes public = yes printable = no share modes = yes ;locking = yes what is write [filials\user1] so user1 was in the catalog filials

  Read the article

• VPS stops responding every now and again

  - by Or W

  I have a Linode vps that I use to host some of my websites on. It's Ubuntu based and it's up to date in terms of all packages. I don't have any cron jobs scheduled or any automatic processes. I host a few (up to date) wordpress blogs there that have very little traffic altogether. Every day (at a different time) my server stops responding, I can't SSH to it, web access is getting timed out and it just dies until I reboot it through the Linode manager. On the linode dashboard I can see that the CPU is not very high (2-3%) Incoming/Outgoing traffic is on 0 and the IO count has a spike just before the server stops responding (SWAP IO is at 2k and IO Rate is at 5k). When I reboot the server everything is just fine. I'm trying to figure out a way to analyze what's going on at these random times where the server freezes up. How can I determine the problem?

  Read the article

• init.d service died

  - by jerluc

  Adapting some code from a linux forum, I've added a service script to /etc/init.d on my ubuntu natty server to start/stop/restart node.js It literally was working the first day I made it, but then today, after viewing my website this morning, the server threw a 404, and upon further inspection, the node.js process was gone. So I went to start the service again, only this time, node.js didn't start at all, and ever since I haven't been able to get my service script working. Below is the entire script: #!/bin/sh # # Node Server Startup # case "$1" in start) echo -n "Starting node: " daemon node /usr/local/www/server.js echo touch /var/lock/subsys/node ;; stop) echo -n "Shutting down node: " killall node echo rm -f /var/lock/subsys/node rm -f /var/run/node.pid ;; status) status node ;; restart) $0 stop $0 start ;; reload) echo -n "Reloading node: " killall node -HUP echo ;; *) echo "Usage: $0 {start|stop|restart|reload|status}" exit 1 esac exit 0 Thanks for any help!

  Read the article

• Move /var directories to to /mnt on an EC2 instance

  - by Geoff Lanotte

  I am trying to work on a standard configuration for a set of EC2 instances running ubuntu 12.04. These servers are going to be primarily web servers for a Ruby on Rails application. When you configure a new large instance, you are given a primary of 8GB and then ephemeral storage of 400 GB that is mounted to /mnt. It seems logical to me to move some directories that have a potential for growth off to the /mnt directory, I was specifically thinking of /var/www and /var/log. My question is two-fold: Is this a good idea or are there pitfalls that I cannot see? If this is a good idea, how should I go about configuring this. I do have the ability to configure new instances and down our old instances. My concern is over long term, doing this in such a way that it prevents downtime. I am a developer with some experience in devops, but mounting drives is something I have not faced before, so explicit directions would be greatly appreciated.

  Read the article

< Previous Page | 353 354 355 356 357 358 359 360 361 362 363 364  | Next Page >