Search Results

Search found 69890 results on 2796 pages for 'ip help'.

Page 358/2796 | < Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365  | Next Page >

• Can a Windows 2003 Active Directory server act as a NTP server?

  - by Rob Nicholson

  Within our LAN, there are two Windows 2003 servers with the Active Directory role. Both these servers have the time service configured to query NTP servers on the internet for the accurate time. That works fine. I've just installed XenServer v5.6 and it's asked me for the IP address of an NTP server. Without tweaking the firewall, I cannot configure this server to reference an internet based NTP server. But can I configure it to use the IP address of the internal AD servers, i.e. do AD servers also act as NTP servers to other computers? Thanks, Rob.

  Read the article

• Add a private git repository to FishEye

  - by lostInTransit

  Hi I am trying to find some help on the FishEye documentation to help me add a private git repository to it. This is all I can get I can setup a public repository using this method but not able to add a private repository. I believe I need to add some credentials to FishEye for it to be able to access the repo. But where do I add these creds? Can someone please help me out! Thanks.

  Read the article

• Internet connection very slow after Linksys configuration

  - by NLV

  Hello We have this network setup Server1 - DHCP server, Domain Controller, AD Lease line for Internet connection From lease line to Linksys router (we dont use wireless though) From linksys to Netgear (24 port Switch) and vonage (VoIP) Netgear to all our machines We configured Linsys with the static IP and DNS server addresses our ISP gave and we have routed it correctly. All our work machines are configured with Get IP automatically DNS server addresses our ISP gave The problem is that none of the sites are getting opened promptly. It is taking around 5 minutes to load google.com. But we are able to ping all the sites. What could be the problem?

  Read the article

• How to set up memcached to use unix socket?

  - by alfish

  While I could use memcached on Debian to use the default 11211 port, but I've had great difficulty setting up unix socket, Form what I'v read, I know that I need to create a memcache.socket and add -s /path/to/memcache.socket -a 0766 To /etc/memcached.conf and comment out the default connection port and IP, i.e. -p 11211 -l 127.0.0.1 However, when I restart memcached I get internal server errors on Drupal site. I'm trying to implement unix sockets to avoid TCP/IP overhead and boost overal memcached performance, however not sure how much performance gain one can expect of this tweak. I appreciate your hints or possibly configs to to resolve this.

  Read the article

• VMWare Fusion cannot connect to the NAT connection on my Mac

  - by FFish

  I have been using VMWare Fusion on my Mac to check out my websites on localhost. Now I can't connect anymore with the NAT connection. There seems to be a problem with my IP address or Mac address? I have no idea what causes this, it was working fine before!? In the XP (SP2) VM, in the taskbar I see the Local Area Connection with the yellow warning icon. The bubble says: "This connection has limited or no connectivity. You might not be aisle to access the Internet or some network resources. For more information, click this message." Doing that opens up the Local Area Connection Status panel. In the Support tab, when I click the repair button I get following message: "Windows could not finish repairing the problem because the following action cannot be completed: Renewing IP address." Any help would be greatly appreciated.

  Read the article

• keepalived questions (requirements, abilities, limitations)

  - by Poni

  1) What are keepalived's (physical/network) requirements? Does the two (or more) keepalived' nodes need to be connected to the same switch? (something related to broadcasting maybe). 2) Can keepalived nodes run on different networks, "internet" networks? 3) Is keepalived depend on the router? (as far as I understand, the virtual IP should point to the real router/switch that connects both nodes). 4) Is keepalived "service-independent"? - What is keepalived's involvement domain? IPs only? Or is it service/protocol oriented? - Does it deal ONLY with IP, or is it designed for HTTP for example? - In other words, can I use it for custom (network-based) app? 5) Have more than one failover server? If the answer for question #4 is "yes", i.e it depends on the service type, then is there any general alternative? Preferably easy to install/configure :)

  Read the article

• Get source and destination of outbound traffic in pfSense

  - by maxsilver

  I'm looking at the traffic graph in pfSense (Version 1.2.2), which we're using as a router / NAT / ect on our network. Recently, I'm seeing a sudden, constant spike of 15 - 30kbps traffic outbound, that is unusual for our network (normally its below 2kbps, we're mostly all inbound traffic) Is there any way to determine what the source of this traffic is, or where it's going? (Just an internal IP address for source, and external IP address for destination would be all I need) I've already tried switching the traffic graph to 'LAN' and watching the host list on the right side, but it seems ... flakey. The numbers it shows seem to fade in and out at random, and the values never add up to anywhere near the graph values. I'm not allowed to post the image, but a photo is available at - http://imgur.com/QYjKI.png

  Read the article

• Sharing Internet Connection in Windows 7 is so much more frustrated than Windows XP

  - by Phuong Nguyen

  Back to the time of Windows XP, from Properties dialog of my Wireless Connection, I can enable sharing and then select LAN network from the Drop Down List and boom, I can share it with my friend. We just need a LAN cable (either cross or not-cross is OK) and his Laptop will get an auto IP to gain access to internet. But now with the new Windows 7, everything starts to suck. I cannot see the Drop Down List any more in the sharing panel and my friends Laptop cannot get an automatic IP anymore. Am I doing anything wrong over there? How can I gain back the peace I used to have with Windows XP?

  Read the article

• VPN Connected, How to browse files? Windows Vista

  - by Wbdvlpr

  I am trying to establish a VPN connection to a server in my office from my laptop at home. I tried some of the steps as mentioned here: Connect to a network Connect to a workplace Use my Internet Connection (VPN) Then type server IP address and then my username & password. After creating a VPN connection, I can see I am connected to it. Now I want to browse files on the server. But I have no clue where I should look for them. I was thinking more of a simple step, like, Windows Run > Type ip address > \\124.345.678.900, then a prompt asking username and password, and finally a window opens to view the files. I tried to google it, but still unable to view files. Please help. Update: I didn't mention that when I try to connect to server via \\124.345.678.900 I get 0x80070043 error message.

  Read the article

• cannot connect to MS FTP 7.5 on Windows 2008 on Amazon EC2 instance

  - by minerj

  I have just installed the MS FTP 7.5 upgrade on my Windows 2008 Server (Service Pack 2) running on an Amazon EC2 instance. In the FTP Firewall Support settings for the server in IIS Manager I have set up the passive port range 45001 - 45005 and also set the External Firewall IP address to match the assigned Amazon Elastic IP address. Using the AWS Console I changed the Security Group for the server to allow access to the server through ports 21 and 45001 through 45005. Using an FTP client (either the command line FTP client or Windows Explorer) on the Amazon server I can connect to the FTP server but I cannot connect with an external FTP client. When I checked to see which ports were open on the server using Shields Up it shows that port 21 is open but ports 45001 to 45005 are closed. I assume I'm missing something. Any help greatly appreciated.

  Read the article

• cannot connect to MS FTP 7.5 on Windows 2008 on Amazon EC2 instance

  - by minerj

  I have just installed the MS FTP 7.5 upgrade on my Windows 2008 Server (Service Pack 2) running on an Amazon EC2 instance. In the FTP Firewall Support settings for the server in IIS Manager I have set up the passive port range 45001 - 45005 and also set the External Firewall IP address to match the assigned Amazon Elastic IP address. Using the AWS Console I changed the Security Group for the server to allow access to the server through ports 21 and 45001 through 45005. Using an FTP client (either the command line FTP client or Windows Explorer) on the Amazon server I can connect to the FTP server but I cannot connect with an external FTP client. When I checked to see which ports were open on the server using Shields Up it shows that port 21 is open but ports 45001 to 45005 are closed. I assume I'm missing something. Any help greatly appreciated.

  Read the article

• How to make ssh/rsync/etc use a VLAN network interface?

  - by Annan

  A company I work for has a number of virtual servers with ElasticHosts. They are setup in such a way that eth1 is on a private VLAN connecting them to each other. This is so backups sent between servers are not charged at the same rate as external data transfer. My understanding of how VLANs and network interfaces work is sketchy at best. How can I make ssh, rsync, etc. transfer data through the VLAN? My final solution: I spent a while trying to figure this out, For all servers involved, edit /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static ONBOOT=yes HWADDR=YOUR_MAC_ADDR IPADDR=192.168.0.100 NETMASK=255.255.255.0 Where HWADDR should already be set and the last octate of IPADDR should be different from each other. Then run, on all servers /etc/init.d/network restart After this the IP addresses specified by IPADDR can be used directly as any other IP address.

  Read the article

• PPTP VPN Not Working - Peer failed CHAP authentication, PTY read or GRE write failed

  - by armani

  Brand-new install of CentOS 6.3. Followed this guide: http://www.members.optushome.com.au/~wskwok/poptop_ads_howto_1.htm And I got PPTPd running [v1.3.4]. I got the VPN to authenticate users against our Active Directory using winbind, smb, etc. All my tests to see if I'm still authenticated to the AD server pass ["kinit -V [email protected]", "smbclient", "wbinfo -t"]. VPN users were able to connect for like . . . an hour. I tried connecting from my Android phone using domain credentials and saw that I got an IP allocated for internal VPN users [which I've since changed the range, but even setting it back to the initial doesn't work]. Ever since then, no matter what settings I try, I pretty much consistently get this in my /var/log/messages [and the VPN client fails]: [root@vpn2 ~]# tail /var/log/messages Aug 31 15:57:22 vpn2 pppd[18386]: pppd 2.4.5 started by root, uid 0 Aug 31 15:57:22 vpn2 pppd[18386]: Using interface ppp0 Aug 31 15:57:22 vpn2 pppd[18386]: Connect: ppp0 <--> /dev/pts/1 Aug 31 15:57:22 vpn2 pptpd[18385]: GRE: Bad checksum from pppd. Aug 31 15:57:24 vpn2 pppd[18386]: Peer armaniadm failed CHAP authentication Aug 31 15:57:24 vpn2 pppd[18386]: Connection terminated. Aug 31 15:57:24 vpn2 pppd[18386]: Exit. Aug 31 15:57:24 vpn2 pptpd[18385]: GRE: read(fd=6,buffer=8059660,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Aug 31 15:57:24 vpn2 pptpd[18385]: CTRL: Client 208.54.86.242 control connection finished Now before you go blaming the firewall [all other forum posts I find seem to go there], this VPN server is on our DMZ network. We're using a Juniper SSG-5 Gateway, and I've assigned a WAN IP to the VPN box itself, zoned into the DMZ zone. Then, I have full "Any IP / Any Protocol" open traffic rules between DMZ<--Untrust Zone, and DMZ<--Trust Zone. I'll limit this later to just the authenticating traffic it needs, but for now I think we can rule out the firewall blocking anything. Here's my /etc/pptpd.conf [omitting comments]: option /etc/ppp/options.pptpd logwtmp localip [EXTERNAL_IP_ADDRESS] remoteip [ANOTHER_EXTERNAL_IP_ADDRESS, AND HAVE TRIED AN ARBITRARY GROUP LIKE 5.5.0.0-100] Here's my /etc/ppp/options.pptpd.conf [omitting comments]: name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 192.168.200.42 # This is our internal domain controller ms-wins 192.168.200.42 proxyarp lock nobsdcomp novj novjccomp nologfd auth nodefaultroute plugin winbind.so ntlm_auth-helper "/usr/bin/ntlm_auth --helper-protocol=ntlm-server-1" Any help is GREATLY appreciated. I can give you any more info you need to know, and it's a new test server, so I can perform any tests/reboots required to get it up and going. Thanks a ton.

  Read the article

• Keepalived takes several minutes to recover in a particular situation

  - by NathanE

  I've setup Keepalived for a master-slave style virtual IP and it seems to work well. Both are hosted in almost identical VMs. If I "pause" the VM that is running the Master. The Slave will take over, as expected, almost instantly. However if I then "unpause" the VM that runs the Master. The virtual IP will stop responding the pings. And it takes a good 4 or 5 minutes for it to start pinging again. It seems to be getting desynchronised due to the nature of the way I'm testing it (by pausing/unpausing the VMs). I admit that pausing and unpausing VMs is a slightly dodgy way to test this. But it has raised a concern for me that there could be other scenarios that cause the same undesirable behaviour. Is this expected / by design? Is there anything I can do to the config to improve it? Thanks.

  Read the article

• How to do networking between virtual machines in VirtualBox?

  - by Sanoj

  I have two virtual machines in VirtualBox. I would like to do networking between them. For the moment I have the default configuration on both, but they seams to have the same IP-address 10.0.2.15. I would also like to be able to use Internet with both, and that is Possible now. By default the network-setting is NAT, but I seams like they cannot network internally since they have the same IP. But If I change to internal networking I guess that I cannot access Internet with the virtual machines. How can I set up networking between virtual guest AND have access to Internet on them?

  Read the article

• Exchange 2007: relay only from selected servers based on rDNS

  - by Frank

  I'm looking for a way to make Exchange 2007 only accept mail from a certain group of hosts. These hosts all use the same identifying rDNS entry. Exchange 2003 uses a whitelist based on the reverse DNS, there we could add the hostname to the to the "Domain" field. However, in Exchange 2007 this option seems to be removed. Is there a way to do this? IP's however tend to change. These changes can occur at any time, and it is impossible to keep all the servers up-to-date to the new IP's. Running a script that resolves the hostname and whitelists them accordingly is my last-resort option, but this is not fool-proof. Does anyone know whether this is possible and if so, how? Thanks!

  Read the article

• MBP Bluetooth PAN connection with iPhone 4

  - by Chetan Sachdev

  I am trying to share MBP(OSX 10.8.3) internet connection with iPhone 4 (iOS 6) using Bluetooth PAN(Personal Area Network). Problem is Bluetooth PAN is not getting an ip address. I have tried to renew DHCP lease but nothing works. When I give a Manual IP address, the Bluetooth PAN goes green but doesn't shows the connection in iPhone. Is it possible to share the internet connection via Bluetooth. Note: I don't want to create an Ad-hoc connection over wifi.

  Read the article

• Multicast in private LAN with different subnets

  - by Gobliins

  after i read Multicast IP Addresses and Multicast accross the subnets I am confused. Configuration: I have two devices in the same network. They may not be in the same Subnet, but always in the same physical network (beyond the same router, switch etc.) I want to communicate across IP multicast either 224.x.x.x or 239.x.x.x may be more fitting because we want it local, not beyond of forward through the router. Can one machine be the receiver and the other machine sender of the same multicast address? and can the receiving machine send an answer to the sending machine?

  Read the article

• How come I can't ping my home computer?

  - by bikefixxer

  I'm trying to set up a vpn into my home computer in order to access files from wherever. I have the home computer set up with a no-ip dynamic dns program so I can always connect, and have also tried using the actual ip address. However, when I try to connect or even ping from anywhere outside of my house I can't get through. I've tried putting that particular computer in the dmz, turned off the computers firewall and anti-virus, and I still don't get anything. I have comcast as my home internet provider. I have also tried from two different locations. Are there any other solutions I can try or is comcast the issue? I used to be able to do this when I ran a small web server at home for fun but now nothing works. Thanks in advance for any suggestions!

  Read the article

• cannot access my own computer through My Network Places

  - by vgv8

  My home Windows XP Pro SP3 machine is DHCP client receiving configurations from ISP. Trying to access in WindowsExplorer -My Network Places - Microsoft Windows Network shows Workgroup with a delay of 3 min and then popups messagebox: Microsoft Windows Network Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The list of servers for this workgroup is not currently available OK I am logged-in as local machine Administrator. The internet is accessible (I am writing this post through it) The Firewall is disabled The "Computer Bowser" and all networking services, I could find, are running Control Panel -- Network Connections -- Properties (of connection) --- Internet Protocol (TCP/IP), btn Properties --- --- tab General, btn "Advanced..." -- tab WINS-- rbtn "Enable NetBIOS over TCP/IP" checked Why cannot I access my own PC (and shares on it) through My Network Places What is the possible problem? How to daignose the problem?

  Read the article

• How to fill in the network line in the ubuntu interfaces config file?

  - by matnagel

  I have to configure an ubuntu hardy server network interface. The service hoster told me that this is the network data for the machine: IP Range: 111.111.200.74 to 111.111.200.78 Netmask: 255.255.255.248 Broadcast: 111.111.200.79 Gateway: 111.111.200.73 Subnet: 111.111.200.72/29 I am only using the first IP address. I will update the /etc/hosts file with 111.111.200.74, but I am still unsure how the /etc/network/interfaces file should be. This is my plan: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 111.111.200.74 netmask 255.255.255.248 network 111.111.200.??? broadcast 111.111.200.79 gateway 111.111.200.73 As you can see I don't know how to build the network line. How would I calculate the data for the network line and what is the result? (I changed the first 2 octets of the subnet, they are not "111.111" in the real setup.)

  Read the article

• How do you set up DNS in Window Server 2008 in a Hyper-V environment?

  - by Nathan DeWitt

  I have a laptop running Server 2008 and Hyper-V. I have created a virtual machine that is also running Server 2008, that I used dcpromo to create as a domain controller. I disabled IPv6 because I had no idea how to enter a default address, and I just wanted to make a standalone MOSS dev environment. I have tried every combination of creating a virtual network on the host and then connecting to that in the VM, but I can't get the VM to communicate with the host and vice versa. No pinging, no copy and paste, nothing. Thanks. To update: My VM (which is its own DC) currently does not have a static IP. When I set the IP to static, I could not find anything that would let it talk to the host machine.

  Read the article

• Hyper-V management remotely

  - by Péter

  I'll tell you in advance that I'm newbie in the topic. I have a Win8 (Home) machine with Hyper-V installed behind a router. The router has a public IP and a domain attached. I have another Win8 (Work) machine also installed Hyper-V. I want to access to my home Hyper-V via Hyper-V Manager so I can manage my virtual machines from work. I found this article but I don't know if it's applicable to me. I thought that a simple port forwarding should work and I only need to do is grant the Work HV manager my domain and the port I choose and if it's pop a login form I only need to fill the user data of my Home computer? How can I solve this? My thoughts revolve around: - Port forwarding - set domain+port and set my home user - Set up a VPN and use the local ip address of my home computer (it looks like a little cumbersome and my router only support PPTP) I'm open to any other solution too. Thanks, Péter

  Read the article

• Failed reverse DNS and SPF only when using Thunderbird!

  - by TruMan1

  I have a reverse DNS and SPF records correctly setup for my mail server. Sending webmail from it works perfect. The problem is when Thunderbird sends out emails, it is using the client's IP address for the hostname. I have SMTP authentication and specified my mail server's as the outgoing SMTP. Mail is being sent, but it is not "signing" the email with the mail server's IP address.. it is using the client's. Is there any way to fix this? This is the spam error I get when sending from Thunderbird: Spam: Reverse DNS Lookup, SPF_SoftFail

  Read the article

• Why can't I connect to remote Microsoft SQL Server through SSH tunnel?

  - by Alexander

  I have at home a D-Link DIR-615 C1 router with DD-WRT. I set up the SSH server on the router, and log on through an SSH2-RSA passphrase-protected key. That router is the gateway between the local network and the internet. One of the computers on that network has Microsoft SQL Server 2008 installed, with TCP/IP protocol enabled through port 1433. I've set up port forwarding on the router, so that remote connections are possible and are, in fact, working (some developers log on remotely without problems). I am part of another network, that has internet access through a proxy server, which only has ports 80 and 443 opened. I can't connect to that MSSQL server on that remote server because 1433 port is closed on this network. I connected (using Putty) through 443 port to my router's SSH server, and set up 2 tunnels. One is for RDP (3389), and it's working. The other is for 1433 port, to connect to the server. I can't connect through the SSH tunnel to the MS SQL Server, neither through telnet, or through GUI clients. Am I missing something? Additional details: on connect, I get this error from SQL Server Management Studio: TITLE: Connect to Server Cannot connect to localhost:14330. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 3) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=3&LinkId=20476 BUTTONS: OK The tunnel is configured like this: L14330 192.168.0.103:1433 192.168.0.103 is the permanent address of the SQL Server on the LAN. I also successfully forwarded TCP traffic of 3389 port to that IP, so tunneling is working to that IP address. When connecting without tunnel, through Microsoft SQL Server Management Studio, using the same method the connection establishes. Too bad my proxy doesn't allow 1433 port traffic, I wouldn't have this headache.

  Read the article

< Previous Page | 354 355 356 357 358 359 360 361 362 363 364 365  | Next Page >