Search Results

Search found 9894 results on 396 pages for 'primary interop assembly'.

Page 360/396 | < Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >

• Have to dhclient each restart to access internet

  - by Zeophlite

  So each time I restart my ubuntu server (virtual 10.04, via Xencenter), I have to call dhclient before I can access the internet: http://img813.imageshack.us/i/dhclient.png/ What do I need to change to get internet access automatically? Apologies for posting images, I'm using Xencenter, so I can't copy/paste the console output EDIT:: daniel@workwork:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.69.136 netmask 255.255.255.0 network 192.168.69.0 broadcast 192.168.69.255 gateway 192.168.69.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 192.168.69.120 dns-search workwork.com.au daniel@workwork:~$ ifconfig eth0 Link encap:Ethernet HWaddr ae:11:14:22:0a:03 inet6 addr: fe80::ac11:14ff:fe22:a03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:85 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10496 (10.4 KB) TX bytes:13086 (13.0 KB) Interrupt:32 Base address:0x6000 eth1 Link encap:Ethernet HWaddr b2:2c:40:f2:a0:fa inet addr:192.168.69.167 Bcast:192.168.69.255 Mask:255.255.255.0 inet6 addr: fe80::b02c:40ff:fef2:a0fa/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13448 errors:0 dropped:0 overruns:0 frame:0 TX packets:3100 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7679428 (7.6 MB) TX bytes:282286 (282.2 KB) Interrupt:36 Base address:0xa100 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:179 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:36905 (36.9 KB) TX bytes:36905 (36.9 KB) daniel@workwork:/var/lib/dhcp3$ cat dhclient.leases lease { interface "eth1"; fixed-address 192.168.69.167; filename "boot\\x86\\wdsnbp.com"; option subnet-mask 255.255.255.0; option routers 192.168.69.1; option dhcp-lease-time 28800; option dhcp-message-type 5; option domain-name-servers 192.168.69.120,192.168.69.121; option dhcp-server-identifier 192.168.69.120; option dhcp-renewal-time 14400; option dhcp-rebinding-time 25200; option domain-name "workwork.com.au"; renew 5 2011/03/18 07:36:53; rebind 5 2011/03/18 11:35:39; expire 5 2011/03/18 12:35:39; } lease { interface "eth1"; fixed-address 192.168.69.167; filename "boot\\x86\\wdsnbp.com"; option subnet-mask 255.255.255.0; option routers 192.168.69.1; option dhcp-lease-time 28800; option dhcp-message-type 5; option domain-name-servers 192.168.69.120,192.168.69.121; option dhcp-server-identifier 192.168.69.120; option dhcp-renewal-time 14400; option dhcp-rebinding-time 25200; option domain-name "workwork.com.au"; renew 5 2011/03/18 08:51:58; rebind 5 2011/03/18 12:24:16; expire 5 2011/03/18 13:24:16; } daniel@workwork:/var/lib/dhcp3$ cat dhclient.eth0.leases daniel@workwork:/var/lib/dhcp3$ ifconfig eth1 before and after dhclient http://img692.imageshack.us/i/prepost.png/

  Read the article

• BluRay audio/video stuttering with PowerDVD 11, WinDVD 11 Pro, etc? Xonar/Auzen HD audio option?

  - by jrista

  I recently upgraded my Windows 7 MediaCenter HTPC due to a motherboard failure (really old motherboard and cpu, it was on its last legs.) I chose to upgrade to an i5 system with everything built into the motherboard. I did my due diligence, researched, and found some hardware that was within my budget. I ended up with: Core i5 2500K (3.3Ghz) Corsair XMS3 2x2Gb DDR3 (4Gb) ASUS P8H 61-M LE/CSM MicroCenter 64Gb SSD (Previous BluRay player, forget the brand) The system is pretty awesome, and plays everything I have perfectly. I almost went with an Atom solution, however there have been numerous notes that they do not play NetFlix Instant Watch well...and I am a heavy Netflix IW user. High definition BluRay rips work well, although they usually contain lower audio quality than the BluRay's they were ripped from. The real problem I am encountering is playing back BluRay video from discs. For some reason, I am encountering rather terrible stuttering problems with both the audio and video. The stuttering is synchronous in both, and occurs at seemingly random intervals. I've used PowerDVD 9, PowerDVD 11 trial, and WinDVD 11 Pro trial. All three have stuttering problems, although PowerDVD 11 seems to have the least. Watching system resource usage, CPU load is never above 20%, and memory usage tends to be a constant 1/3rd the total available system memory. When playback is fine, its superb...the video is crystal clear. The audio quality is ok, certainly not what I would expect from a BluRay disc. I did some research, and it seems that playing BluRay from a PC causes a downsampling of the audio? I am curious if the audio is my primary problem here, the cause of the stuttering I am encountering? When stuttering occurs, the audio gets REALLY bad, while the video just pauses momentarily every second until for whatever reason everything picks up and runs fine (usually after a few seconds to a couple minutes.) The audio chipset is a Realtek HD ALC887 8-channel, supposedly designed to support BluRay playback. Has anyone encountered any issues like this playing back bluray discs on a PC (namely with PowerDVD...WinDVD was FAR worse, and seemed to have real trouble even reading the discs, and I have no interest in fiddling with it further.) Is there any reason to suspect the video decoding as the problem?(Given how bad the audio gets during a stutter, and how clean the video remains, I am inclined to think the issue boils down to audio.) Is it even remotely possible that the motherboard, cpu, or ram are causing the stuttering (all three are pretty blazing fast...faster than the hardware that I replaced, which seemed to play BluRay fine with PowerDVD 9.) I've read a bit about the Asus Xonar HDAV 1.3 and the Auzen X-Fi HomeTheater HD home theater hi-fi audio cards. Seems they are the only way to get true full-quality, uncompressed BluRay audio bitstreaming over HDMI on a PC. None of the usual suspects seem to have these cards in stock, however. Are these cards worth getting? Are they even still available, or have they been discontinued (if so, that would indeed be sad...they sound simply fantastic.)

  Read the article

• Moving users folder on Windows-7 to another partition - bad idea?

  - by Donat

  Hi, I'd like to re-submit here a question posted by Benjol on Aug 17at 5:57 "Moving users folder on Windows Vista to another partition - bad idea?" (I can't post one than one link until I earn "10 reputation" and removed my "answer" there to post my follow-up questions here). I am anxiously getting ready at long last to to carry out a clean install (using custom install option) from Vista to Windows-7 Home Premium 64bit with the free upgrade I received late October. For my Vista system I successfully set-up last Summer a multi-partitions scheme with Users and Program Data on a a different partition than the operating system (see link below, and its subsequent links in my comment for details). http://tuts4tech.net/2009/08/05/windows-7-move-the-users-and-program-files-directories-to-a-different-partition/comment-page-1/#comment-562 I was planning a similar set-up for windows 7, a little more streamlined, with OS, Program Files on C:, Users and Program Data on D:, and TV media recording on a separate partition. Reading the Question submitted by Benjol, I am second guessing too. Is moving Users and Program Data on a different partition than the default primary partition with OS and Program Files such a good idea? The couple of people I talked to at the official Microsoft Windows 7 booth at CES 2010 gave the same answer to the intention of moving the Users profile folder to another partition. In a nutshell, they all told me that they used to do this in XP and less in Vista but not anymore with Windows 7... "It is stable, after two months still no problem" I had the feeling it was a scripted answer to emphasize how Windows 7 is so stable and efficient... (Will Windows-7 system not become bugged down over the course of several months to a year or two? Only time will tell) Long story short, I share the same view than Benjol expressed with respect to being "able to backup and restore system and user data independently." I just received a 2TB usb2, eSATA external hard drive as a back-up drive, which includes NTI Shadow 4 (4.1.0.150) for back-up solution. I took note of the issue with NTUSER.DAT and I will read more about Volume Shadow Copy Service (VSS) for Windows 7. I am willing to put the effort if placing Users and Program Data on a different partition would allow to restore a fresher OS+Program image when the system gets bugged down. Questions: Is it such a bad idea? What is the "easy route" referred by Benjol in his post? Is it to just relocate folders to another partition using the Folder property tool? (It is not practical for several users and might not provide a straightforward restore process of just OS and Program Files when needed.) I am starting to learn about Windows 7 libraries. Would Windows 7 libraries be another alternative to achieve this? All this reading to decide how to organize the partition scheme for my custom system is starting to be confusing. I apologize for this lengthy Question. It is my first day here on SuperUser and I am just learning how different from a discussion thread it is. Thank you in advance for all your suggestions and comments. Donat

  Read the article

• Windows XP Video Configuration Issues

  - by Matt

  Recently I had my motherboard burn out on me. Needing the machine for work, I purchased a different motherboard and installed that. Generally a reinstall of windows is good at that point but I am not in a position to do that so I just decided I would live with it for now. When I can log-in, everything works fine, what doesn't is getting to the log-in prompt to begin with. Basically when I first installed the new mobo, every time I rebooted the machine, I would not get the windows login prompt. One of the monitors would receive a signal but the screen would be black. Moving the mouse would not show the cursor and hitting the up arrow key and typing my password and hitting enter (which will normally log you in without mouse) wouldn't change anything. I would then change the monitor configuration around (2 lcd's and a crt) and reboot and at least one of the monitors would work and display the login prompt. I could then go into display properties and turn on the other monitors. However if I rebooted again, I would get the black screen on one monitor again. I would then have to change the configuration again to one not used before and I could re-do the manual setup at that point. I think windows saves the configurations so I had to keep giving it new ones. Needless to say I've been trying to not turn off my machine. Early this week I actually got the prompt to come up without playing musical monitors. Thinking everything was getting better, I found no harm in rebooting to install the latest windows updates. Boy was I wrong. Now no matter what I do I can't get a windows log-in prompt to display. I've tried almost every conceivable combination. The new mobo has onboard video so I set that in the bios (yea bios screen always displays fine, its not until windows boots that there is a problem) to be the primary video. Still no luck. I have two other graphics cards in the machine which I'm using. Tried all kinds of configurations between those and on-board but still get this black screen of death. I read somewhere that deleting the video drivers would reset the configurations. I logged into safe mode (which works on one monitor), and uninstalled the display drivers. Still no luck and when I booted back into safe mode, it wanted to install new hardware and the display adapters weren't there as expected. Anyone have any ideas? A fresh install would be a pain and I might be getting my old board back from RMA soon so not sure I want to go through with that just yet. Only thing I can think of is to continue to try other combinations like physically removing the graphics cards. They are both EVGA 8600 cards and the windows boot screen does display fwiw.

  Read the article

• Mongodb Slave replication lag

  - by Leonid Bugaev

  We using standard mongo setup: 2 replicas + 1 arbiter. Both replica servers use same AWS m1.medium with RAID10 EBS. We experiencing constantly growing replication lag on secondary replica. I tried to do full-resync, you can see it on graph, but it helped only for some hours. Our mongo usage is really low now, and frankly i can't understan why it can be. iostat 1 for secondary: avg-cpu: %user %nice %system %iowait %steal %idle 80.39 0.00 2.94 0.00 16.67 0.00 Device: tps kB_read/s kB_wrtn/s kB_read kB_wrtn xvdap1 0.00 0.00 0.00 0 0 xvdb 0.00 0.00 0.00 0 0 xvdfp4 12.75 0.00 189.22 0 193 xvdfp3 12.75 0.00 189.22 0 193 xvdfp2 7.84 0.00 40.20 0 41 xvdfp1 7.84 0.00 40.20 0 41 md127 19.61 0.00 219.61 0 224 mongostat for secondary (why 100% locks? i guess its the problem): insert query update delete getmore command flushes mapped vsize res faults locked % idx miss % qr|qw ar|aw netIn netOut conn set repl time *10 *0 *16 *0 0 2|4 0 30.9g 62.4g 1.65g 0 107 0 0|0 0|0 198b 1k 16 replset-01 SEC 06:55:37 *4 *0 *8 *0 0 12|0 0 30.9g 62.4g 1.65g 0 91.7 0 0|0 0|0 837b 5k 16 replset-01 SEC 06:55:38 *4 *0 *7 *0 0 3|0 0 30.9g 62.4g 1.64g 0 110 0 0|0 0|0 342b 1k 16 replset-01 SEC 06:55:39 *4 *0 *8 *0 0 1|0 0 30.9g 62.4g 1.64g 0 82.9 0 0|0 0|0 62b 1k 16 replset-01 SEC 06:55:40 *3 *0 *7 *0 0 5|0 0 30.9g 62.4g 1.6g 0 75.2 0 0|0 0|0 466b 2k 16 replset-01 SEC 06:55:41 *4 *0 *7 *0 0 1|0 0 30.9g 62.4g 1.64g 0 138 0 0|0 0|1 62b 1k 16 replset-01 SEC 06:55:42 *7 *0 *15 *0 0 3|0 0 30.9g 62.4g 1.64g 0 95.4 0 0|0 0|0 342b 1k 16 replset-01 SEC 06:55:43 *7 *0 *14 *0 0 1|0 0 30.9g 62.4g 1.64g 0 98 0 0|0 0|0 62b 1k 16 replset-01 SEC 06:55:44 *8 *0 *17 *0 0 3|0 0 30.9g 62.4g 1.64g 0 96.3 0 0|0 0|0 342b 1k 16 replset-01 SEC 06:55:45 *7 *0 *14 *0 0 3|0 0 30.9g 62.4g 1.64g 0 96.1 0 0|0 0|0 186b 2k 16 replset-01 SEC 06:55:46 mongostat for primary insert query update delete getmore command flushes mapped vsize res faults locked % idx miss % qr|qw ar|aw netIn netOut conn set repl time 12 30 20 0 0 3 0 30.9g 62.6g 641m 0 0.9 0 0|0 0|0 212k 619k 48 replset-01 M 06:56:41 5 17 10 0 0 2 0 30.9g 62.6g 641m 0 0.5 0 0|0 0|0 159k 429k 48 replset-01 M 06:56:42 9 22 16 0 0 3 0 30.9g 62.6g 642m 0 0.7 0 0|0 0|0 158k 276k 48 replset-01 M 06:56:43 6 18 12 0 0 2 0 30.9g 62.6g 640m 0 0.7 0 0|0 0|0 93k 231k 48 replset-01 M 06:56:44 6 12 8 0 0 3 0 30.9g 62.6g 640m 0 0.3 0 0|0 0|0 80k 125k 48 replset-01 M 06:56:45 8 21 14 0 0 9 0 30.9g 62.6g 641m 0 0.6 0 0|0 0|0 118k 419k 48 replset-01 M 06:56:46 10 34 20 0 0 6 0 30.9g 62.6g 640m 0 1.3 0 0|0 0|0 164k 527k 48 replset-01 M 06:56:47 6 21 13 0 0 2 0 30.9g 62.6g 641m 0 0.7 0 0|0 0|0 111k 477k 48 replset-01 M 06:56:48 8 21 15 0 0 2 0 30.9g 62.6g 641m 0 0.7 0 0|0 0|0 204k 336k 48 replset-01 M 06:56:49 4 12 8 0 0 8 0 30.9g 62.6g 641m 0 0.5 0 0|0 0|0 156k 530k 48 replset-01 M 06:56:50 Mongo version: 2.0.6

  Read the article

• mysqld service crashes on restart, after importing mysqldump #innodb

  - by ubunut

  I have 2 mysql servers. Let's call them server01 & server02. Both have the same configuration: mysqladmin Ver 8.42 Distrib 5.1.61, for redhat-linux-gnu on x86_64 [client] default-character-set=utf8 [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 max_allowed_packet = 16M default-character-set=utf8 default-collation=utf8_unicode_ci character-set-server=utf8 collation-server=utf8_unicode_ci default-storage-engine = InnoDB innodb_data_home_dir = /var/lib/mysql innodb_log_group_home_dir = /var/lib/mysql innodb_data_file_path = ibdata1:10M:autoextend innodb_additional_mem_pool_size = 2M innodb_log_file_size = 5M innodb_log_buffer_size = 8M innodb_lock_wait_timeout = 50 innodb_flush_log_at_trx_commit = 1 innodb_buffer_pool_size = 700M table_cache = 300 thread_cache_size = 4 query_cache_size = 200m query_cache_limit = 10m [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid I make a mysqldump on server01: mysqldump -uuser -ppassword --all-databases testservers.sql (most tables in these databases are innodb, some of the mysql.* tables are Innodb too) Then I import the testservers.sql on server02: mysql -uuser < testservers.sql (mysqld has been started with --skip-network). So far so good, I can login into mysql & everything seems to be ok. BUT when I exit to the shell and execute service mysqld restart, The service fails to start. stack-trace in /var/log/mysqld.log: 121022 14:53:19 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 121022 14:53:19 [Warning] '--default-character-set' is deprecated and will be removed in a future release. Please use '--character-set-server' instead. 121022 14:53:19 [Warning] '--default-collation' is deprecated and will be removed in a future release. Please use '--collation-server' instead. 12:53:19 UTC - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8384512 read_buffer_size=131072 max_used_connections=0 max_threads=151 thread_count=0 connection_count=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 338324 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. Thread pointer: 0x267e630 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 7fff3efe0be0 thread_stack 0x40000 /usr/libexec/mysqld(my_print_stacktrace+0x29) [0x84bd89] /usr/libexec/mysqld(handle_fatal_signal+0x483) [0x6a0be3] /lib64/libpthread.so.0() [0x338d60f500] /usr/libexec/mysqld(ha_resolve_by_name(THD*, st_mysql_lex_string const*)+0x81) [0x6956e1] /usr/libexec/mysqld(open_table_def(THD*, st_table_share*, unsigned int)+0xe0a) [0x60e5ba] /usr/libexec/mysqld(get_table_share(THD*, TABLE_LIST*, char*, unsigned int, unsigned int, int*)+0x20b) [0x602b0b] /usr/libexec/mysqld() [0x603597] /usr/libexec/mysqld(open_table(THD*, TABLE_LIST*, st_mem_root*, bool*, unsigned int)+0x7a1) [0x6079a1] /usr/libexec/mysqld(open_tables(THD*, TABLE_LIST**, unsigned int*, unsigned int)+0x5d0) [0x608570] /usr/libexec/mysqld(open_and_lock_tables_derived(THD*, TABLE_LIST*, bool)+0x6a) [0x60877a] /usr/libexec/mysqld(plugin_init(int*, char**, int)+0x622) [0x715af2] /usr/libexec/mysqld() [0x5bd3b2] /usr/libexec/mysqld(main+0x1b3) [0x5bfc93] /lib64/libc.so.6(__libc_start_main+0xfd) [0x338d21ecdd] /usr/libexec/mysqld() [0x5087b9] Trying to get some variables. Some pointers may be invalid and cause the dump to abort. Query (0): is an invalid pointer Connection ID (thread ID): 0 Status: NOT_KILLED The manual page at http://dev.mysql.com/doc/mysql/en/crashing.html contains information that should help you find out what is causing the crash. 121022 14:53:19 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended A typical mysqdump entry looks like this: DROP TABLE IF EXISTS `adodb_logsql`; /*!40101 SET @saved_cs_client = @@character_set_client */; /*!40101 SET character_set_client = utf8 */; CREATE TABLE `adodb_logsql` ( `id` bigint(10) unsigned NOT NULL AUTO_INCREMENT, `created` datetime NOT NULL, `sql0` varchar(250) NOT NULL DEFAULT '', `sql1` text, `params` text, `tracer` text, `timer` decimal(16,6) NOT NULL DEFAULT '0.000000', PRIMARY KEY (`id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8 COMMENT='to save some logs from ADOdb'; /*!40101 SET character_set_client = @saved_cs_client */; IF I change all occurrences of "ENGINE=InnoDB" to "ENGINE=MyISAM" before import, then the service has no problem restarting. I'm quite puzzled as to what's happening, maybe I'm just an idiot, then by all means tell me so. Any help would be greatly appreciated!

  Read the article

• How to delete files and folders that cannot be deleted?

  - by glenneroo

  I have a backup copy of a previous Windows' Documents and Settings folder which only contains my original user and within 2 more directories: Favorites and Local Settings. When I try to delete Local Settings I get this error: When I try to delete Favorites, I get this error: I ran this in a cmd shell: attrib *.* -r -a -s -h /s ...but it did not help, nor did it return any errors/warnings. I used Unlocker v1.8.5 and LockHunter repeatedly at multiple levels to see if any files are in use, but both always say: No Files Locked. Update #1: I was able to rename the directory, which now gives me this warning before (trying to) delete: If I press Yes (or Yes to All) then I get this error: Update #2: I let chkdsk /f run which required a reboot since it's on my primary system partition. During Stage 2 scanning, I received about 40 of these: Deleting an index entry from index $0 of file 25. ...followed by: Deleting index entry cookies in index $I30 of file 37576. ...but I still get the first error dialog above when trying to delete. I ran chkdsk again, this time: chkdsk /f /r. Produced no messages. Same result when deleting. Update #3: Digging deeper, the 99 is the name of one of many directories located deep in here: C:\Documents and Settings.OLD\User\Local Settings\Application Data\Microsoft\Messenger\[email protected]\SharingMetadata\[email protected]\DFSR\Staging\CS{D4E4AE55-B5E2-F03B-5189-6C4DA6E41788}\ Inside each of those directories were files with names such as: 2300-{C93D01AC-0739-4FD9-88C7-13D2F21A208E}-v2300-{C93D01AC-0739-4FD9-88C7-13D2F21A208E}-v2300-Downloaded.frx I noticed that, unlike all the directories, I couldn't rename any of these files. I also noticed that the file + dir names were extremely long: Original directory = 194 characters Filenames = 100+ characters Together the length exceeds the 255-char limit which is bad and would explain the error message I posted in Update #1. Partial Solution: Rename all directories until the total path length is less than 100. Afterwards I was able to rename the .frx files, not to mention delete everything inside the Local Settings directory. This is only a partial solution because these (empty) directories are still not deleteable, C:\1\2\Favorites\Wien\What To Do.. C:\1\2\Favorites\Photography\FIRE Same error as above: Here is what Explorer properties shows for both folders: Update #4 (another partial solution): Using harrymc's answer combined with thoroughly reading through this amazing MS-KB article which contains nearly everyone's idea and then some, inconspicuously titled: You cannot delete a file or a folder on an NTFS file system volume. I was able to delete the 2nd folder C:\1\2\Favorites\Photography\FIRE - the problem being that there was an invisible trailing space at the end. I got lucky when I did an auto-complete whilst playing around with the del "\\?\<path>" command which he suggested. NOTE: A normal del did NOT work, nor did deleting from explorer. Now all that is left is the first directory C:\1\2\Favorites\Wien\What To Do.. (yes I tried endlessly with multiple combinations of the above solution ;) Keep 'em coming! =)

  Read the article

• Cisco 678 Will Not Work using PPPoE - Possibly Because I Configured it Incorrectly..?

  - by Brian Stinar

  I am attempting to configure a Cisco 678 because I am totally sick on my Actiontec. However, I am running into some problems. It seems as though the Cisco is able to train the line, but I am unable to ping out. I am all right at programming, but still learning a lot when it comes to being a system administrator. I apologize in advance if I did something ridiculous, or am attempting to configure this device to do something it was not designed to do. It is almost like I am not correctly configuring the device to grab it's IP using PPPoA (like my Actiontec.) The output from "show running" (below) makes me think this too. Below are the commands I ran in order to configure this: # en # set nvram erase # write # reboot # en # set nat enable # set dhcp server enable # set PPP wan0-0 ipcp 0.0.0.0 # set ppp wan0-0 dns 0.0.0.0 # set PPP wan0-0 login xxxxx // My actual login # set PPP wan0-0 password yyyyy // My actual password # set PPP restart enabled # set int wan0-0 close # set int wan0-0 vpi 0 # set int wan0-0 vci 32 # set int wan0-0 open # write # reboot Here is the output from a few commands I thought could provide some useful information: cbos#ping 74.125.224.113 Sending 1 8 byte ping(s) to 74.125.224.113 every 2 second(s) Request timed out cbos#show version Cisco Broadband Operating System CBOS (tm) 678 Software (C678-I-M), Version v2.4.9 - Release Software Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Nov 17 2004 15:26:29 DMT FULL firmware version G96 NVRAM image at 0x1030f000 cbos#show errors - Current Error Messages - ## Ticks Module Level Message 0 000:00:00:00 PPP Info IPCP Open Event on wan0-0 1 000:00:00:14 ATM Info Wan0 Up 2 000:00:00:14 PPP Info PPP Up Event on wan0-0 3 000:00:01:54 PPP Info PPP Down Event on wan0-0 Total Number of Error Messages: 4 cbos#show interface wan0 wan0 ADSL Physical Port Line Trained Actual Configuration: Overhead Framing: 3 Trellis Coding: Enabled Standard Compliance: T1.413 Downstream Data Rate: 1184 Kbps Upstream Data Rate: 928 Kbps Interleave S Downstream: 4 Interleave D Downstream: 16 Interleave R Downstream: 16 Interleave S Upstream: 4 Interleave D Upstream: 8 Interleave R Upstream: 16 Modem Microcode: G96 DSP version: 0 Operating State: Showtime/Data Mode Configured: Echo Cancellation: Disabled Overhead Framing: 3 Coding Gain: Auto TX Power Attenuation: 0dB Trellis Coding: Enabled Bit Swapping: Disabled Standard Compliance: T1.413 Remote Standard Compliance: T1.413 Tx Start Bin: 0x6 Tx End Bin: 0x1f Data Interface: Utopia L1 Status: Local SNR Margin: 19.0dB Local Coding Gain: 7.5dB Local Transmit Power: 12.5dB Local Attenuation: 46.0dB Remote Attenuation: 31.0dB Local Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 2 No Cell Delineation Interleaved: 0 Out of Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 Remote Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 1 No Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 cbos#show int wan0-0 WAN0-0 ATM Logical Port PVC (VPI 0, VCI 32) is configured. ScalaRate set to Auto AAL 5 UBR Traffic IP Port Enabled cbos#show running Warning: traffic may pause while NVRAM is being accessed [[ CBOS = Section Start ]] NSOS MD5 Enable Password = XXXX NSOS MD5 Root Password = XXXX NSOS MD5 Commander Password = XXXX [[ PPP Device Driver = Section Start ]] PPP Port User Name = 00, "XXXX" PPP Port User Password = 00, XXXX PPP Port Option = 00, IPCP,IP Address,3,Auto,Negotiation Not Required,Negotiable ,IP,0.0.0.0 PPP Port Option = 00, IPCP,Primary DNS Server,129,Auto,Negotiation Not Required, Negotiable,IP,0.0.0.0 PPP Port Option = 00, IPCP,Secondary DNS Server,131,Auto,Negotiation Not Require d,Negotiable,IP,0.0.0.0 [[ ATM WAN Device Driver = Section Start ]] ATM WAN Virtual Connection Parms = 00, 0, 32, 0 [[ DHCP = Section Start ]] DHCP Server = enabled [[ IP Routing = Section Start ]] IP NAT = enabled [[ WEB = Section Start ]] WEB = enabled cbos# wtf...? Thank you all very much for taking the time to read this, and the help.

  Read the article

• Installing .NET application on IIS 7.5 issues

  - by Juw

  Really need some help here. I am at a loss. I am trying to install a webservice that some other guy wrote in .NET. I have some basic IIS understanding. The webservice works just fine on my dev computer. But now i try to move the webservice to a production server and bad things happens. The webservice has been located in C:\inetpub\wwwroot\ dir on the dev server. But on this production server it is to be located in D:\services\ I have managed to install an application on the production server and everything seems fine and dandy. But when i "Test Settings" in the initial setup i get "Invalid application path" error. But i can just close it down and still install it. But when i try to access the webservice with: http://myserver.com/webservice/GetData nothing happens. Just a blank page and when i check the response headers...500 error. I don´t know what is going on here or where the problem is. I post the config file here so someone hopefully might notice something odd. Thanx in advance! EDIT: The config file is from my dev server. I just copied it to my production server...but that obviously didn´t work :-) UPDATE: I noticed that my dev server run in an Application pool with Net 4 and in "classic" "mode". On the production server it was in NET 4 but in "integrated" mode. So i changed it to "classic". I still get a blank page. But checking the log will output this: 2012-10-03 14:57:00 ip removed GET /boo/GetData - 80 - ip removed Mozilla/5.0+(Windows+NT+6.1;+WOW64;+rv:15.0)+Gecko/20100101+Firefox/15.0.1 404 2 1260 203 <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.web> <identity impersonate="true" /> <!-- Impersonate NT AUTHORITY/IUSR --> <compilation targetFramework="4.0"> <assemblies> <add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b7735c561131e089" /> </assemblies> </compilation> <pages controlRenderingCompatibilityVersion="3.5" clientIDMode="AutoID" /> </system.web> <system.webServer> <modules runAllManagedModulesForAllRequests="true" /> <httpErrors existingResponse="PassThrough" /> <httpProtocol> <customHeaders> <add name="Access-Control-Allow-Origin" value="*" /> </customHeaders> </httpProtocol> <directoryBrowse enabled="false" /> </system.webServer> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> <standardEndpoints> <webHttpEndpoint> <!-- Configure the WCF REST service base address via the global.asax.cs file and the default endpoint via the attributes on the <standardEndpoint> element below --> <standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true" /> </webHttpEndpoint> </standardEndpoints> </system.serviceModel> <connectionStrings> <add name="Entities" connectionString="metadata=res://*/DataModel.csdl|res://*/DataModel.ssdl|res://*/DataModel.msl;provider=System.Data.SqlClient;provider connection string=&quot;data source=someip;initial catalog=db_90;User ID=user1;Password=access2;multipleactiveresultsets=True;App=EntityFramework&quot;" providerName="System.Data.EntityClient" /> </connectionStrings> </configuration>

  Read the article

• IPv6: Should I have private addresses?

  - by AlReece45

  Right now, we have a rack of servers. Every server right now has at least 2 IP addresses, one for the public interface, another for the private. The servers that have SSL websites on them have more IP addresses. We also have virtual servers, that are configured similarly. Private Network The private range is currently just used for backups and monitoring. Its a gigabit port, the interface usage does not usually get very high. There are other technologies we're considering using that would use this port: iSCSI (implementations usually recommends dedicating an interface to it, which would be yet another IP network), VPN to get access to the private range (something I'd rather avoid) dedicated database servers LDAP centralized configuration (like puppet) centralized logging We don't have any private addresses in our DNS records (only public addresses). For our servers to utilize the correct IP address for the right interface (and not hard code the IP address) probably requires setting up a private DNS server (So now we add 2 different dns entries to 2 different systems). Public Network Our public range has a variety of services include web, email, and ftp. There is a hardware firewall between our network and the "public" network. We have (relatively secure) method to instruct the firewall to open and close administrative access (web interfaces, ssh, etc) for our current IP address. With either solution discussed, the host-based firewalls will be configured as well. The public network currently runs at a dedicated 20Mbps link. There are a couple of legacy servers with fast-ethernet ports, but they are scheduled for decommissioning. All of the other production boxes have at least 2 Gigabit Ethernet ports. The more traffic-heavy servers have 4-6 available (none is using more than the 2 Gigabit ports right now). IPv6 I want to get an IPv6 prefix from our ISP. So at least every "server" has at least one IPv6 interface. We'll still need to keep the IPv4 addressees up and available for legacy clients (web servers and email at the very least). We have two IP networks right now. Adding the public IPv6 address would make it three. Just use IPv6? I'm thinking about just dumping the private IPv4 range and using the IPv6 range as the primary means of all communications. If an interface starts reaching its capacity, utilize the newly free interfaces to create a trunk. It has the advantage that if either the public or private traffic needs to exceed 1Gbps. The traffic for each interface is already analyzed on a regular basis to predict future bandwidth use. In the rare instances where bandwidth unexpected peaks: utilize QoS to ensure traffic (like our limited SSH access) is prioritized correctly so the problem can be corrected (if possible, our WAN is the bottleneck right now). It also has the advantage of not needing to make an entry for every private address. We may have private DNS (or just LDAP), but it'll be much more limited in scope with less entries to duplicate. Summary I'm trying to make this network as "simple" as possible. At the same time, I want to make sure its reliable, upgradeable, scalable, and (eventually) redundant. Having one IPv6 network, and a legacy IPv4 network seems to be the best solution to me. Regarding using assigned IPv6 addresses for both networks, sharing the available bandwidth on one (more trunked if needed): Are there any technical disadvantages (limitations, buffers, scalability)? Are there any other security considerations (asides from firewalls mentioned above) to consider? Are there regulations or other security requirements (like PCI-DSS) that this doesn't meet? Is there typical software for setting up a Linux network that doesn't have IPv6 support yet? (logging, ldap, puppet) Some other thing I didn't consider?

  Read the article

• Setting up home DNS with Ubuntu Server

  - by Zeophlite

  I have a webserver (with static IP 192.168.1.5), and I want to have my machines on my local network to be able to access it without modifying /etc/hosts (or equivalent for Windows/OSX). My router has Primary DNS server 192.168.1.5 Secondary DNS server 8.8.8.8 (Google's public DNS). Nginx is set up to server websites externally as *.example.com Internally, I want *.example.local to point to the server. My webserver has BIND9 installed, but I'm unsure of the settings. I've been through various contradicting tutorials, and so most of my settings have been clobbered. I've stripped out the lines which I'm confused about. The tutorials I looked at are http://tech.surveypoint.com/blog/installing-a-local-dns-server-behind-a-hardware-router/ and http://ubuntuforums.org/showthread.php?t=236093 . They mostly differ on what should be put in /etc/bind/zones/db.example.local and /etc/bind/zones/db.192, so I've left the conflicting lines out below. Can someone suggest what the correct lines are to give my above behaviour (namely *.example.local pointing to 192.168.1.5)? /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.5 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.254 /etc/hostname avalon /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN /etc/bind/named.conf.options options { directory "/var/cache/bind"; forwarders { 8.8.8.8; 8.8.4.4; }; dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local zone "example.local" { type master; file "/etc/bind/zones/db.example.local"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.192"; }; /etc/bind/zones/db.example.local $TTL 604800 @ IN SOA avalon.example.local. webadmin.example.local. ( 5 ; Serial, increment each edit 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL /etc/bind/zones/db.192 $TTL 604800 @ IN SOA avalon.example.local. webadmin.example.local. ( 4 ; Serial, increment each edit 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; What do I need to add to the above files so that on a laptop on the internal network, I can type in webapp.example.local, and be served by my webserver? EDIT I made several changes to the above files on the webserver. /etc/network/interfaces (end of file) dns-nameservers 127.0.0.1 dns-search example.local /etc/bind/zones/db.example.local (end of file) @ IN NS avalon.example.local. @ IN A 192.168.1.5 avalon IN A 192.168.1.5 webapp IN A 192.168.1.5 www IN CNAME 192.168.1.5 /etc/bind/zones/db.192 (end of file) IN NS avalon.example.local. 73 IN PTR avalon.example.local. As a side note, my spare Win7 machine was able to connect directly to webapp.example.local, but for a Ubuntu 13.10 machine, I had to make the following changes as well (not on the webserver, but on a separate machine): /etc/nsswitch.conf before hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 after hosts: files dns /etc/NetworkManager/NetworkManager.conf before dns=dnsmasq after #dns=dnsmasq The issue remains that its not wildcard DNS, and so I have to add entries to /etc/bind/zones/db.example.local for webapp1, webapp2, ...

  Read the article

• Network update solutions for a company of ~20 (5 local, 15 remote)?

  - by Margaret

  Hi all This is probably going to be a bit up in the air, because we're still in the "reaching towards solutions" phase, but I figured I'd see what you guys had to say. Plus I honestly know very little about systems and what is good and bad pratice. My organisation has always more or less worked on the concept of local machines; since it primarily employed contractors who were working from home, each of those people was largely responsible for their own machine and backup procedures and the like. We're now expanding, though we're still reasonably small (we're up to about 20 staff members). Most people still work remotely, but we have a central office where about five people are working. But we're getting large enough that we're starting to think it would be a good idea to have a central file server, and things like that - if someone gets hit by a bus, we want someone else to know where to look for the files to continue their work. A lot of the people who work for us remotely work on projects for other companies as well, so I don't want to force them to log in to our server whenever they're on a network. But I do want to make connection to be as painless as possible to do so, to improve utilisation. The other thing is that we're getting more people who would like to remote into the office server and do their work there. Our current remote connection application is an SSH install that allows people access to the network; the problem is, it's a black box to me, and I've never understood how to even connect to it (despite supposedly being de facto sysadmin). Thus far I've been able to bounce questions about how to get it working to the guy who does know it well, but he's leaving the company soon. So we probably need a solution for this that I actually understand. We were knocking around the idea of implementing a VPN with some form of remote desktop, and someone mentioned that this was largely a matter of purchasing a router capable of it; I'm not sure of the truth of that statement. This is what we have in the office: Two shiny new i7 servers, each running Windows Server 2008. Precise eventual layout is still being debated, a little, but the current suggestion is that one is primary database crunching, while the other is a warm backup of the databases, along with running Reporting Services. They currently have SQL Server 2008 installed on them, which is being connected to via the 'sa' account. We're hoping to make each person use their own account (preferably one tied to the 'central' password we set up, so we can use Windows Authentication). An older server, running XP Pro, that we are currently using as a test bed for a project that requires access to older versions of software. This machine is also being used to take backups, but I'm thinking of moving that functionality elsewhere. A spare desktop from a guy who left the company (XP Pro). We're thinking of bumping up the hard disk space and using it as the magical file server that's going to solve one particular everything. Assorted desktops, laptops, etc, at least one for each person in the office (mix of Win XP and Win 7; occasionally a person who normally works remotely might drop in to the office and bring a laptop bearing Vista, but it's pretty rare). All are set up as local user accounts at the moment; I don't know if it's the best arrangement. Purchasing more hardware is not a big problem, but we figure we might as well make use of what we've got first. Is Active Directory a big magic wand that's going to solve all the world's problems? Is there some other arrangement we should be looking to instead?

  Read the article

• suddenly can't connect to router

  - by Khoi

  I was just downloading some stuff in ubuntu and snap, the connection cut and I can't even connect to my router. And the router, it still works fine, my laptop can connect wirelessly to it as usual. But my main computer (which connects to it directly through cable) can't even ping it. Here is my ipconfig: Windows IP Configuration Host Name . . . . . . . . . . . . : vento Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Realtek RTL8169/8110 Family Gigabit Ethernet NIC Physical Address. . . . . . . . . : 00-19-DB-4E-6C-56 Ethernet adapter {15B1F740-2F35-4FE4-9FEE-4052AFBAD096}: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Anchorfree HSS Adapter - Packet Sche duler Miniport Physical Address. . . . . . . . . : 00-FF-15-B1-F7-40

  Read the article

• BIND no longer responds to AXFR Requests

  - by djsumdog

  Recently we moved our primary external DNS server. It has three caching DNS slaves in front of it provided by our ISP. They've told us they've started getting access denied requests when doing zone transfers (AXFR). If I add in my own IPs to the allow-transfer list, I also get a transfer failed when using dig with the AXFR argument. Here is what my bind configuration looks like: options { directory "/var/lib/named"; dump-file "/var/log/named_dump.db"; zone-statistics yes; statistics-file "/var/log/named.stats"; listen-on-v6 { any; }; notify-source 10.19.0.68 port 53; querylog yes; notify yes; allow-transfer { 127.0.0.1; //localhost 1.1.1.1; //public dns slave 1 2.2.2.2; //public dns slave 2 3.3.3.3; //public dns slave 3 }; also-notify { 1.1.1.1; //public dns slave 1 2.2.2.2; //public dns slave 2 3.3.3.3; //public dns slave 3 }; include "/etc/named.d/forwarders.conf"; }; logging { channel simple_log { file "/var/log/bind.log" versions 10 size 3m; severity info; print-time yes; print-severity yes; print-category yes; }; category default{ simple_log; }; channel log_zone_transfers { file "/var/log/axfr.log" versions 10 size 3m; print-time yes; print-category yes; print-severity yes; }; category xfer-out { log_zone_transfers; }; channel log_notify { file "/var/log/notify.log" versions 10 size 3m; print-time yes; print-category yes; print-severity yes; }; category notify { log_notify; }; channel queries { file "/var/log/queries.log" versions 10 size 30m; print-time yes; severity info; print-category yes; print-severity yes; }; category queries { queries; }; }; zone "." in { type hint; file "root.hint"; }; zone "localhost" in { type master; file "localhost.zone"; }; zone "0.0.127.in-addr.arpa" in { type master; file "127.0.0.zone"; }; include "/etc/named.conf.include"; zone "example.net " { type master; file "/var/lib/named/master/example.net.hosts"; }; zone "example.com " { type master; file "/var/lib/named/master/example.com.hosts"; }; ## -- other master files -- And the errors in the xfer log look like the following: 29-Oct-2012 14:20:02.806 xfer-out: info: client 1.1.1.1#59069: bad zone transfer request: 'example.com./IN': non-authoritative zone (NOTAUTH) I've tried adding allow-transfer parameters directly on the zone files and still get failed transfers. Any idea what I'm doing wrong?

  Read the article

• Problem with video playback on iPad with MPMoviePlayerViewController

  - by Symo

  Hello everybody... I have been fighting some code for about a week, and am hoping that someone else may have experienced this problem and can point me in the right direction. I am using the MPMoviePlayerViewController to play a video on the iPad. The primary problem is that it works FLAWLESSLY on the iPad Simulator, but will not play at all on the iPad. I have tried re-encoding the video to make sure that isn't an issue. The video I'm using is currently a 480x360 video encoded with H.264 Basline 3.0 with AAC/LC audio. The video plays fine on the iPhone, and also does play through Safari on the iPad. The video actually loads, and you can scrub through the video with the scrubber bar and see that it is there. The frames actually display, but just will not play. If you click play, it just immediately stops. Even when I have mp.moviePlayer.shouldAutoplay=YES set, you can see the player attempt to play, but only for a split second (maybe 1 frame?). I have tried just adding view with the following code: in .h ------ MPMoviePlayerViewController *vidViewController; @property (readwrite, retain) MPMoviePlayerViewController *vidViewController; in .m ------ MPMoviePlayerViewController *mp=[[MPMoviePlayerViewController alloc] initWithContentURL:[NSURL URLWithString:videoURL]]; [mp shouldAutorotateToInterfaceOrientation:YES]; mp.moviePlayer.scalingMode=MPMovieScalingModeAspectFit; mp.moviePlayer.shouldAutoplay=YES; mp.moviePlayer.controlStyle=MPMovieControlStyleFullscreen; [videoURL release]; self.vidViewController = mp; [mp release]; [self.view addSubview:vidViewController.view]; float w = self.view.frame.size.width; float h = w * 0.75; self.vidViewController.view.frame = CGRectMake(0, 0, w, h); I have also just tried to do a: [self presentMoviePlayerViewControllerAnimated:self.vidViewController]; which I actually can not get to orient properly...always shows up in Portrait and almost completely off the screen on the bottom, and the app is only intended to run in either of the Landscape views... If anybody needs more info, just let me know. I'm about at my wits end on this. ANY help will be GREATLY appreciated.

  Read the article

• JPA exception: Object: ... is not a known entity type.

  - by Toto

  I'm new to JPA and I'm having problems with the autogeneration of primary key values. I have the following entity: package jpatest.entities; import java.io.Serializable; import javax.persistence.Entity; import javax.persistence.GeneratedValue; import javax.persistence.GenerationType; import javax.persistence.Id; @Entity public class MyEntity implements Serializable { private static final long serialVersionUID = 1L; @Id @GeneratedValue(strategy = GenerationType.AUTO) private Long id; public Long getId() { return id; } public void setId(Long id) { this.id = id; } private String someProperty; public String getSomeProperty() { return someProperty; } public void setSomeProperty(String someProperty) { this.someProperty = someProperty; } public MyEntity() { } public MyEntity(String someProperty) { this.someProperty = someProperty; } @Override public String toString() { return "jpatest.entities.MyEntity[id=" + id + "]"; } } and the following main method in other class: public static void main(String[] args) { EntityManagerFactory emf = Persistence.createEntityManagerFactory("JPATestPU"); EntityManager em = emf.createEntityManager(); em.getTransaction().begin(); MyEntity e = new MyEntity("some value"); em.persist(e); /* (exception thrown here) */ em.getTransaction().commit(); em.close(); emf.close(); } This is my persistence unit: <?xml version="1.0" encoding="UTF-8"?> <persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"> <persistence-unit name="JPATestPU" transaction-type="RESOURCE_LOCAL"> <provider>oracle.toplink.essentials.PersistenceProvider</provider> <class>jpatest.entities.MyEntity</class> <properties> <property name="toplink.jdbc.user" value="..."/> <property name="toplink.jdbc.password" value="..."/> <property name="toplink.jdbc.url" value="jdbc:mysql://localhost:3306/jpatest"/> <property name="toplink.jdbc.driver" value="com.mysql.jdbc.Driver"/> <property name="toplink.ddl-generation" value="create-tables"/> </properties> </persistence-unit> </persistence> When I execute the program I get the following exception in the line marked with the proper comment: Exception in thread "main" java.lang.IllegalArgumentException: Object: jpatest.entities.MyEntity[id=null] is not a known entity type. at oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl.registerNewObjectForPersist(UnitOfWorkImpl.java:3212) at oracle.toplink.essentials.internal.ejb.cmp3.base.EntityManagerImpl.persist(EntityManagerImpl.java:205) at jpatest.Main.main(Main.java:...) What am I missing?

  Read the article

• C# remote web request certificate error

  - by Ben

  Hi. I am currently integrating a payment gateway into an application. Following a successful transaction the remote payment gateway posts details of the transaction back to my application (ITN). It posts to a HttpHandler that is used to read and validate the data. Part of the validation performed is a POST made by the handler to a validation service provided by the payment gateway. This effectively posts some of the original form values received back to the payment gateway to ensure they are valid. The url that I am posting back to is: "https://sandbox.payfast.co.za/eng/query/validate" and the code I am using: /// <summary> /// Posts the data back to the payment processor to validate the data received /// </summary> public static bool ValidateITNRequestData(NameValueCollection formVariables) { bool isValid = true; try { using (WebClient client = new WebClient()) { string validateUrl = (UseSandBox) ? SandboxValidateUrl : LiveValidateUrl; byte[] responseArray = client.UploadValues(validateUrl, "POST", formVariables); // get the resposne and replace the line breaks with spaces string result = Encoding.ASCII.GetString(responseArray); result = result.Replace("\r\n", " ").Replace("\r", "").Replace("\n", " "); if (result == null || !result.StartsWith("VALID")) { isValid = false; LogManager.InsertLog(LogTypeEnum.OrderError, "PayFast ITN validation failed", "The validation response was not valid."); } } } catch (Exception ex) { LogManager.InsertLog(LogTypeEnum.Unknown, "Unable to validate ITN data. Unknown exception", ex); isValid = false; } return isValid; } However, on calling WebClient.UploadValues the following exception is raised: System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure. at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception) at For the sake of brevity I haven't listed the full call stack (I can do if anyone thinks it will help). The remote certificate does appear to be valid. To get around the problem I did try adding a new RemoteCertificateValidationCallback that always returned true but just ended up getting the following exception: System.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet) at System.Security.CodeAccessPermission.Demand() at System.Net.ServicePointManager.set_ServerCertificateValidationCallback(RemoteCertificateValidationCallback value) at NopSolutions.NopCommerce.Payment.Methods.PayFast.PayFastPaymentProcessor.ValidateITNRequestData(NameValueCollection formVariables) The action that failed was: Demand The type of the first permission that failed was: System.Security.Permissions.SecurityPermission The Zone of the assembly that failed was: MyComputer So I am not sure this will work in medium trust? Any help would be much appreciated. Thanks Ben

  Read the article

• NHibernate.MappingException: No persister for:

  - by Sara Chipps

  Now, before you say it I DID google and my hbm.xml file IS an Embedded Resource. Here is the code I am calling: ISession session = GetCurrentSession(); var returnObject = session.Get<T>(Id); Here is my mapping file for the class: <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2"> <class name="HQData.Objects.SubCategory, HQData" table="SubCategory" lazy="true"> <id name="ID" column="ID" unsaved-value="0"> <generator class="identity" /> </id> <property name="Name" column="Name" /> <property name="NumberOfBuckets" column="NumberOfBuckets" /> <property name="SearchCriteriaOne" column="SearchCriteriaOne" /> <bag name="_Businesses" cascade="all"> <key column="SubCategoryId"/> <one-to-many class="HQData.Objects.Business, HQData"/> </bag> <bag name="_Buckets" cascade="all"> <key column="SubCategoryId"/> <one-to-many class="HQData.Objects.Bucket, HQData"/> </bag> </class> </hibernate-mapping> Has anyone run to this issue before? I swore that was it after I read it, but no dice. Here is the rest of the error and thanks for your help. MappingException: No persister for: HQData.Objects.SubCategory]NHibernate.Impl.SessionFactoryImpl.GetEntityPersister(String entityName, Boolean throwIfNotFound) in c:\CSharp\NH2.0.0\nhibernate\src\NHibernate\Impl\SessionFactoryImpl.cs:766 NHibernate.Impl.SessionFactoryImpl.GetEntityPersister(String entityName) in c:\CSharp\NH2.0.0\nhibernate\src\NHibernate\Impl\SessionFactoryImpl.cs:752 NHibernate.Event.Default.DefaultLoadEventListener.OnLoad(LoadEvent event, LoadType loadType) in c:\CSharp\NH2.0.0\nhibernate\src\NHibernate\Event\Default\DefaultLoadEventListener.cs:37 NHibernate.Impl.SessionImpl.FireLoad(LoadEvent event, LoadType loadType) in c:\CSharp\NH2.0.0\nhibernate\src\NHibernate\Impl\SessionImpl.cs:2054 NHibernate.Impl.SessionImpl.Get(String entityName, Object id) in c:\CSharp\NH2.0.0\nhibernate\src\NHibernate\Impl\SessionImpl.cs:1029 NHibernate.Impl.SessionImpl.Get(Type entityClass, Object id) in c:\CSharp\NH2.0.0\nhibernate\src\NHibernate\Impl\SessionImpl.cs:1020 NHibernate.Impl.SessionImpl.Get(Object id) in c:\CSharp\NH2.0.0\nhibernate\src\NHibernate\Impl\SessionImpl.cs:985 HQData.DataAccessUtils.NHibernateObjectHelper.LoadDataObject(Int32 Id) in C:\Development\HQChannelRepo\HQ Channel Application\HQChannel\HQData\DataAccessUtils\NHibernateObjectHelper.cs:42 HQWebsite.LocalSearch.get_subCategory() in C:\Development\HQChannelRepo\HQ Channel Application\HQChannel\HQWebsite\LocalSearch.aspx.cs:17 HQWebsite.LocalSearch.Page_Load(Object sender, EventArgs e) in C:\Development\HQChannelRepo\HQ Channel Application\HQChannel\HQWebsite\LocalSearch.aspx.cs:27 System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +15 System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +33 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +47 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1436 I had changed some code and I wasn't adding the Assembly to the config file during runtime. Thanks for your help This has been fixed, I am not F-ing with my NHibernate setup ever again!

  Read the article

• How to solve this error that is shown on Windbg?

  - by aF

  Hello, I've loaded a .exe and it gave this error: Microsoft (R) Windows Debugger Version 6.12.0002.633 X86 Copyright (c) Microsoft Corporation. All rights reserved. CommandLine: "C:\Users\Public\SoundLog\Code\Código Python\SoundLog\dist\SoundLog.exe" Symbol search path is: *** Invalid *** **************************************************************************** * Symbol loading may be unreliable without a symbol search path. * * Use .symfix to have the debugger choose a symbol path. * * After setting your symbol path, use .reload to refresh symbol locations. * **************************************************************************** Executable search path is: ModLoad: 00400000 0061c000 image00400000 ModLoad: 771a0000 772dc000 ntdll.dll ModLoad: 76e10000 76ee4000 C:\Windows\system32\kernel32.dll ModLoad: 75460000 754aa000 C:\Windows\system32\KERNELBASE.dll ModLoad: 76550000 76619000 C:\Windows\system32\USER32.dll ModLoad: 76b30000 76b7e000 C:\Windows\system32\GDI32.dll ModLoad: 77310000 7731a000 C:\Windows\system32\LPK.dll ModLoad: 76ef0000 76f8d000 C:\Windows\system32\USP10.dll ModLoad: 75650000 756fc000 C:\Windows\system32\msvcrt.dll ModLoad: 65ee0000 65f83000 C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_508ed732bcbc0e5a\MSVCR90.dll (c8.704): Break instruction exception - code 80000003 (first chance) eax=00000000 ebx=00000000 ecx=0012fb0c edx=771e64f4 esi=fffffffe edi=00000000 eip=7723e60e esp=0012fb28 ebp=0012fb54 iopl=0 nv up ei pl zr na pe nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246 *** ERROR: Symbol file could not be found. Defaulted to export symbols for ntdll.dll - ntdll!LdrVerifyImageMatchesChecksum+0x633: 7723e60e cc int 3 0:000> g Then I pressed F5 and while executing the program gave me this error (this one is what I need to solve): ModLoad: 6f980000 6ff11000 C:\Windows\Microsoft.NET\Framework\v2.0.50727\mscorwks.dll ModLoad: 6f8e0000 6f97b000 C:\Windows\WinSxS\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4927_none_d08a205e442db5b5\MSVCR80.dll ModLoad: 752f0000 752fb000 C:\Windows\system32\profapi.dll ModLoad: 6e670000 6f168000 C:\Windows\assembly\NativeImages_v2.0.50727_32\mscorlib\8c1770d45c63cf5c462eeb945ef9aa5d\mscorlib.ni.dll ModLoad: 03d90000 03dac000 SoundLogC++WrapperDLL.dll ModLoad: 03db0000 03dcc000 SoundLogC++WrapperDLL.dll ModLoad: 6afa0000 6affb000 C:\Windows\Microsoft.NET\Framework\v2.0.50727\mscorjit.dll ModLoad: 04dd0000 04e13000 msvcm90.dll ModLoad: 04e20000 04e63000 msvcm90.dll ModLoad: 76aa0000 76b23000 C:\Windows\system32\CLBCatQ.DLL ModLoad: 75280000 752df000 C:\Windows\system32\sxs.dll ModLoad: 60340000 60348000 C:\Windows\Microsoft.NET\Framework\v2.0.50727\culture.dll (b78.9c8): C++ EH exception - code e06d7363 (first chance) (b78.9c8): C++ EH exception - code e06d7363 (first chance) (b78.9c8): C++ EH exception - code e06d7363 (first chance) (b78.9c8): C++ EH exception - code e06d7363 (first chance) (b78.9c8): C++ EH exception - code e06d7363 (first chance) (b78.9c8): CLR exception - code e0434f4d (first chance) (b78.9c8): CLR exception - code e0434f4d (first chance) (b78.9c8): C++ EH exception - code e06d7363 (first chance) (b78.9c8): C++ EH exception - code e06d7363 (first chance) (b78.9c8): CLR exception - code e0434f4d (!!! second chance !!!) eax=0012e2a4 ebx=e0434f4d ecx=00000001 edx=00000000 esi=0012e32c edi=002bada0 eip=75469617 esp=0012e2a4 ebp=0012e2f4 iopl=0 nv up ei pl nz ac po nc cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000212 *** ERROR: Symbol file could not be found. Defaulted to export symbols for C:\Windows\system32\KERNELBASE.dll - KERNELBASE!RaiseException+0x54: 75469617 c9 leave Can anyone tell me what is this and how can I solve it?

  Read the article

• SSRS Report from Oracle DB - Use stored procedure

  - by Emtucifor

  I am developing a report in Sql Server Reporting Services 2005, connecting to an Oracle 11g database. As you post replies perhaps it will help to know that I'm skilled in MSSQL Server and inexperienced in Oracle. I have multiple nested subreports and need to use summary data in outer reports and the same data but in detail in the inner reports. In order to spare the DB server from multiple executions, I thought to populate some temp tables at the beginning and then query just them the multiple times in the report and the subreports. In SSRS, Datasets are evidently executed in the order they appear in the RDL file. And you can have a dataset that doesn't return a rowset. So I created a stored procedure to populate my four temp tables and made this the first Dataset in my report. This SP works when I run it from SQLDeveloper and I can query the data from the temp tables. However, this didn't appear to work out because SSRS was apparently not reusing the same session, so even though the global temporary tables were created with ON COMMIT PRESERVE ROWS my Datasets were empty. I switched to using "real" tables and am now passing in an additional parameter, a GUID in string form, uniquely generated on each new execution, that is part of the primary key of each table, so I can get back just the rows for this execution. Running this from Sql Developer works fine, example: DECLARE ActivityCode varchar2(15) := '1208-0916 '; ExecutionID varchar2(32) := SYS_GUID(); BEGIN CIPProjectBudget (ActivityCode, ExecutionID); END; Never mind that in this example I don't know the GUID, this simply proves it works because rows are inserted to my four tables. But in the SSRS report, I'm still getting no rows in my Datasets and SQL Developer confirms no rows are being inserted. So I'm thinking along the lines of: Oracle uses implicit transactions and my changes aren't getting committed? Even though I can prove that the non-rowset returning SP is executing (because if I leave out the parameter mapping it complains at report rendering time about not having enough parameters) perhaps it's not really executing. Somehow. Wrong execution order isn't the problem or rows would appear in the tables, and they aren't. I'm interested in any ideas about how to accomplish this (especially the part about not running the main queries multiple times). I'll redesign my whole report. I'll stop using a stored procedure. Suggest anything you like! I just need help getting this working and I am stuck. If you want more details, in my SSRS report I have a List object (it's a container that repeats once for each row in a Dataset) that has some header values and then contains a subreport. Eventually, there will be four total reports: one main report, with three nested subreports. Each subreport will be in a List on the parent report.

  Read the article

• .Net Crystal Report printing application running on termianal service connection errors when session

  - by MrEdmundo

  I have created a .Net application to run on an App Server that gets requests for a report and prints out the requested report. The C# application uses Crystal Reports to load the report and subsequently print it out. The application is run on Server which is connected to via a Remote Desktop connection under a particular user account (required for old apps). When I disconnect from the Remote Session the application starts raising exceptions such as: Message: CrystalDecisions.Shared.CrystalReportsException: Load report failed This type of error is never raised when the Remote Session is active. The server running the app is running Windows Server 2003, my box which creates the connection is Windows XP. I appreciate this is fairly weird, however I cannot see any problem with the application deployment I have created. Does anyone know what could be cause this issue? EDIT: I bit the bullet and created the application as a windows service, obviously this doesn't take long I just wasn't convinced it would solve the problem. Anyway it doesn't!!! I have also tried removing the multi-thread code that was calling the print function asynchronously. I did this in order to simply the app and narrow down the reason it could fail. Anyway, this didn't improve the situation either! EDIT: The two errors I get are: System.Runtime.InteropServices.COMException (0x80000201): Invalid printer specified. at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal) at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value) at Dsa.PrintServer.Service.Service.PrintCrystalReport(Report report) The printer isn't invalid, this is confirmed when 60 seconds later the time ticks and the report is printed successfully. And The request could not be submitted for background processing. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.GetLastPageNumber(RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext) --- End of inner exception stack trace --- at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) at CrystalDecisions.ReportSource.EromReportSourceBase.GetLastPageNumber(ReportPageRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN) at CrystalDecisions.CrystalReports.Engine.ReportDocument.PrintToPrinter(Int32 nCopies, Boolean collated, Int32 startPageN, Int32 endPageN) at Dsa.PrintServer.Service.Service.PrintCrystalReport(Report report) EDIT: I ran filemon to check if there were any access issue. At the point when the error occurs file mon reports Request: OPEN | Path: C:\windows\assembly\gac_msil\system\2.0.0.0__b77a5c561934e089\ws2_32.dll | Result: NOT FOUND | Other: Attributes Error

  Read the article

• ASP.NET GridView second header row to span main header row

  - by Dana Robinson

  I have an ASP.NET GridView which has columns that look like this: | Foo | Bar | Total1 | Total2 | Total3 | Is it possible to create a header on two rows that looks like this? | | Totals | | Foo | Bar | 1 | 2 | 3 | The data in each row will remain unchanged as this is just to pretty up the header and decrease the horizontal space that the grid takes up. The entire GridView is sortable in case that matters. I don't intend for the added "Totals" spanning column to have any sort functionality. Edit: Based on one of the articles given below, I created a class which inherits from GridView and adds the second header row in. namespace CustomControls { public class TwoHeadedGridView : GridView { protected Table InnerTable { get { if (this.HasControls()) { return (Table)this.Controls[0]; } return null; } } protected override void OnDataBound(EventArgs e) { base.OnDataBound(e); this.CreateSecondHeader(); } private void CreateSecondHeader() { GridViewRow row = new GridViewRow(0, -1, DataControlRowType.Header, DataControlRowState.Normal); TableCell left = new TableHeaderCell(); left.ColumnSpan = 3; row.Cells.Add(left); TableCell totals = new TableHeaderCell(); totals.ColumnSpan = this.Columns.Count - 3; totals.Text = "Totals"; row.Cells.Add(totals); this.InnerTable.Rows.AddAt(0, row); } } } In case you are new to ASP.NET like I am, I should also point out that you need to: 1) Register your class by adding a line like this to your web form: <%@ Register TagPrefix="foo" NameSpace="CustomControls" Assembly="__code"%> 2) Change asp:GridView in your previous markup to foo:TwoHeadedGridView. Don't forget the closing tag. Another edit: You can also do this without creating a custom class. Simply add an event handler for the DataBound event of your grid like this: protected void gvOrganisms_DataBound(object sender, EventArgs e) { GridView grid = sender as GridView; if (grid != null) { GridViewRow row = new GridViewRow(0, -1, DataControlRowType.Header, DataControlRowState.Normal); TableCell left = new TableHeaderCell(); left.ColumnSpan = 3; row.Cells.Add(left); TableCell totals = new TableHeaderCell(); totals.ColumnSpan = grid.Columns.Count - 3; totals.Text = "Totals"; row.Cells.Add(totals); Table t = grid.Controls[0] as Table; if (t != null) { t.Rows.AddAt(0, row); } } } The advantage of the custom control is that you can see the extra header row on the design view of your web form. The event handler method is a bit simpler, though.

  Read the article

• Multiple tables\objects in one nHibernate mapping

  - by Morrislgn

  Hi Folks I am trying to create an nHibernate mapping for a class structure like so: class UserDetails{ Guid id; User user; Role role; public User UserInfo{ get;set; } public Role UserRoles{ get;set; } public Guid ID{ Get; set; } } class User{ string name; int id; public string Name{ get;set; } public int ID{ get;set; } } class Role{ string roleName; string roleDesc; int roleId; public string RoleName{ get;set; } public string RoleDesc{ get;set; } public int RoleID{ get;set; } } The underlying DB structure is similar to the tables, but there is a linking table which links user and role using their respective IDs: UserRoleLinkTable[ identity User_Role_ID (pk) userID (FK to User table) roleid (FK to Role table) ] After playing about with nHibernate this is similar to what I want to try and achieve (but it doesnt work!): <?xml version="1.0" encoding="utf-8" ?> <hibernate-mapping xmlns="urn:nhibernate-mapping-2.2" assembly="Admin" namespace="Admin" > <class name="UserDetails" lazy="false" table="USER"> <id name="ID"> <generator class="guid"></generator> </id> <one-to-one name="UserInfo" class="User" lazy="false" cascade="none"/> <bag name="UserRoles" inverse="false" table="Role" lazy="false" cascade="none" > <key column="Role" /> <many-to-many class="Role" column="ROLE_ID" /> </bag> </class> </hibernate-mapping> I have mappings\entities which appear to work for Role and User (used in other aspects of the project) objects but how do I pull this information into one UserDetails class? The point of the user details to be able to return all this information together as one object. Is it possible to create (for want of a better description) a container using an nHibernate mapping and map the data that way? Hopefully there is enough info to help work this out - thanks in advance for all help given! Cheers, Morris

  Read the article

• problem with NHibernate and iSeries DB2

  - by chrisjlong

  Ok So I have an AS400/iSeries running v5r4. I have an application that was using classic NHibernate to connect and do some basic crud. Now I have pulled that app (which sat for 2 years) off the shelf of TFS and onto a new PC and cannot seem to get it running. Here is my Hibernate Config: <hibernate-configuration xmlns="urn:nhibernate-configuration-2.2"> <session-factory> <property name="connection.provider"> NHibernate.Connection.DriverConnectionProvider </property> <property name="dialect"> NHibernate.Dialect.DB2400Dialect </property> <property name="proxyfactory.factory_class">NHibernate.ByteCode.LinFu.ProxyFactoryFactory, NHibernate.ByteCode.LinFu</property> <property name="connection.connection_string"> DataSource=207.206.106.19; Database=AS400; userID=XXXXXX; Password=XXXXXXX; LibraryList=FMSFILTST,BEFFILT,HRDBFT,HRCSTFT,J20##X2DEV,GLCUSTDEV,OSL@@F3DEV; Naming=System; Initial Catalog=*SYSBAS; </property> <property name="use_outer_join">true</property> <property name="query.substitutions"> true 1, false 0, yes 'Y', no 'N' </property> <property name="show_sql">false</property> <mapping assembly="BusinessLogic" /> </session-factory> </hibernate-configuration> I have all the proper DLL's included (NHibernate, castle, iesi, antlr3 , log4 etc). Also have this line in my web.config <runtime> <assemblyBinding> <qualifyAssembly partialName="IBM.Data.DB2.iSeries" fullName="IBM.Data.DB2.iSeries,Version=10.0.0.0,PublicKeyToken=9CDB2EBFB1F93A26,Culture=neutral"/> </assemblyBinding> </runtime> Yet I am still getting the following error as soon as I call NHibernate.Cfg.Configuration().Configure().BuildSessionFactory().OpenSession(); The error is as follows Unable to cast object of type 'IBM.Data.DB2.iSeries.iDB2Connection' to type 'System.Data.Common.DbCommand' I am dying to get some help with this. Any assistance is appreciated. Thanks!

  Read the article

• Custom RoleProvider with MVC 2.0 webconfig

  - by Farrell

  I have a custom MembershipProvider and a custom RoleProvider. I created the custom MembershipProvider by creating a SimpleMembershipProvider class which implements the MembershipProvider class. After that I changed my web.config and works. So I used the same approach creating a custom RoleProvider. Nothing special, just creating a SimpleRoleProvider class which implements the RoleProvider class. But then when I changed the web.config file and runs the solution I get the following error message: Web.Config <membership defaultProvider="DashboardMembershipProvider"> <providers> <clear/> <add name="SimpleMembershipProvider" type="Dashboard.Web.Controlling.Account.SimpleMembershipProvider" /> </providers> </membership> <roleManager enabled="true" defaultProvider="DashboardRoleProvider"> <providers> <clear/> <add name="DashboardRoleProvider" type="Dashboard.Web.Controlling.Account.DashboardRoleProvider" /> </providers> </roleManager> Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: No parameterless constructor defined for this object. Source Error Line 78: <add name="SimpleRoleProvider" Line 79: type="Dashboard.Web.Controlling.Account.SimpleRoleProvider" /> So I searched the web. And tried on the type attribute, which generates the following errors: Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: Could not load file or assembly 'Dashboard.Web.Controlling.Account' or one of its dependencies. The system cannot find the file specified. Source Error: Line 78: <add name="SimpleRoleProvider" Line 79: type="Dashboard.Web.Controlling.Account.SimpleRoleProvider,Dashboard.Web.Controlling.Account" /> Any suggestions on how I would be able to get this CustomRoleProvider working? Any help is greatly appreciated!

  Read the article

< Previous Page | 356 357 358 359 360 361 362 363 364 365 366 367  | Next Page >