Search Results

Search found 27649 results on 1106 pages for 'ask how to geek'.

Page 362/1106 | < Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >

• Ubuntu Server Cannot Route to the Internet

  - by ejes

  I've been having this problem for weeks now, and I can't seem to figure out the problem. My server can route the local network and serves it well, however it cannot access the internet. It can't be the router because everything else on this lan can route through the router. I've even switched the ethernet port. Any help would be appreciated. I've tried all the usual places, anyway, here are the configs: root@uhs:~# uname -a Linux uhs 3.0.0-16-generic-pae #28-Ubuntu SMP Fri Jan 27 19:24:01 UTC 2012 i686 i686 i386 GNU/Linux root@uhs:~# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface # auto eth1 # iface eth1 inet dhcp auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 root@uhs:~# ping -c 4 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.334 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.339 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.324 ms 64 bytes from 192.168.0.1: icmp_req=4 ttl=64 time=0.339 ms --- 192.168.0.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.324/0.334/0.339/0.006 ms root@uhs:~# ping -c 4 209.85.145.103 PING 209.85.145.103 (209.85.145.103) 56(84) bytes of data. --- 209.85.145.103 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms root@uhs:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:0c:6e:a0:92:6e inet addr:192.168.0.3 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::20c:6eff:fea0:926e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13131114 errors:0 dropped:0 overruns:0 frame:0 TX packets:10540297 errors:0 dropped:0 overruns:5 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3077922794 (3.0 GB) TX bytes:3827489734 (3.8 GB) Interrupt:10 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7721 errors:0 dropped:0 overruns:0 frame:0 TX packets:7721 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:551950 (551.9 KB) TX bytes:551950 (551.9 KB) root@uhs:~# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 root@uhs:~# # PRETEND Traceroute root@uhs:~# for i in {1..30}; do ping -t $i -c 1 209.85.145.103; done | grep "Time to live exceeded" root@uhs:~#

  Read the article

• How to Network Boot the BitDefender Rescue CD (PXE)

  - by Aviad

  We’ve already shown you how to use the BitDefender Rescue CD to clean your infected PC, but what if you wanted to achieve the same thing only without a CD over the network? In this guide, we’ll show you how. Image by baronsquirrelHow To Easily Access Your Home Network From Anywhere With DDNSHow To Recover After Your Email Password Is CompromisedHow to Clean Your Filthy Keyboard in the Dishwasher (Without Ruining it)

  Read the article

• No longer able to boot stuck in busybox shell

  - by Chris J. Lee

  I've installed win 7 and ubuntu 11.04. After a storm killed the power. i'm unable to boot. I'm stuck in the busybox shell (ash). Here's what happens when i boot: Bios loads Grub displays option to load: ubuntu ubuntu recovery memtest another memtest option win7 win 7 recovery I load Ubuntu This cause it to load and i see no normal ubuntu screen just the busybox shell I try loading ubuntu via fsck -l; and it returns me a /bin/sh not found error. I load windows 7 and i'm unable to boot. I get a blue screen of death I then load ubuntu recovery and i don't have any luck either. Any ideas where to go from here?

  Read the article

• Some websites are not opening in any web browser (firefox/chrome). What should I do? [closed]

  - by Jamal

  Some websites are not opening in my system. I am using Ubuntu 12.10. Earlier, when I was using Ubuntu 10.10,11.10 there was no such issue. The problem was started in ubuntu 12.04, but it remained the same even after formatting and installing ubuntu 12.10. I have tried Firefox as well as Chromium and I am sure the issue is not with the browser. same websites are opening perfectly with Windows. Google, Twitter and Ubuntu related websites are running perfect. Other websites like www.downrightnow.com, easy-mantra.com, facebook.com, sourceforge.net are not opening. Installed dual boot with win xp. Ubuntu 12.10 is 64 bit. Processor Intel core i3, RAM 4GB. $ cat /etc/resolv.conf <-- Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) -- DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN -- output --> nameserver 127.0.1.1

  Read the article

• Upgrade to 12.04 results to empty Dash, no date & time either on the top panel

  - by Nicolas

  I've upgraded from Ubuntu netbook remix something to 12.04 LTS, and I've got two issues. (Got an Asus eeePc 32bits, Intel 945GME x86/MMX/SSE2 and Intel Atom CPU N270 @ 1.6Ghz x2) Nothing in the Dash. Only the "home" tab, other tabs are missing. No search results whatsoever. Missing elements in the system panel, privacy and date & time. No date & time on the right corner either. I've tried to reset unity with the terminal but the process was a whole mess full of errors. It did show date & time in the system panel (not on the top-right corner) while the process was going on in the terminal. But then it was such a mess (no more icons on the right corner amongst other things), and the process wouldn't complete, so I had to reboot the computer and get Unity as before, still no date & time and privacy.

  Read the article

• Dell XPS 15 L502x and Ubuntu 11.04 - HDMI output

  - by Jones

  Recently I've bought my dream's notebook, a Dell XPS 15 but since then this dream became a kind of endless nightmare. I'm almost getting crazy to make my graphic card driver work properly, but it seems to be just impossible. Yes, I have a 2GB NVIDIA GeForce GT 540m (Optimus) in it! It simply doesn't work. Every time I generate the xorg.conf Ubuntu hangs on while starting up, which forces me to remove this file to be able to start the notebook with the standard graphic settings. Another problem is that the Dell XPS 15 does NOT have a VGA output, but a HDMI. So, to be able to use a second monitor I have to configure it by the NVIDIA X Server Settings, which just works if the driver is properly initialized with the xorg.conf. I've also tried to make it work with the Bumblebee, but unfortunately it didn't help me much with the HDMI output. Do you guys have any idea to solve this deadlock? Is there any way for me to use my second monitor?

  Read the article

• How do I consistently activate USB speakers

  - by Andrew.Healy

  I have a pair of Ricco USB speakers. As these are external, I sought to use them with 11.10. They are recognised by 'aplay -l' and Pulseaudio- I have selected them, but, have to reset the volume, every time I log on. I can also only recieve feedback and sound from apps and programs- like Kaffeine- on this boosted volume- I cannot get System Sounds, like logon or logoff. I have tried the alsamixer install that used to work, to no effect. Is their an app that I should be trying or is this feat impossible ? I have tried to delete all the files in .pulse and rebooting or just deletion of the entire .purge directory, as Michael K suggested- neither work as the directory is automatically rewritten on reboot. Ideas?

  Read the article

• Linux Distributive With Global Menu and UbuntuOne For Netbook

  - by Draco Ater

  I like very much global menu in previous versions of Ubuntu. But Unity is too slow for my Eee PC. So now I am looking for some alternative Desktop Environments or Distributions where there is global menu available. But at the same time there should be UbuntuOne service working too, as I use it pretty often. Could you, please, suggest what should I try out? I also use keyboard shortcuts very much and so I guess they should be configurable, and try not to use touchpad at all. So big icons like in gnome-shell and Unity are not a good option.

  Read the article

• How to customise window decoration whilst using Compiz on Xubuntu?

  - by Benjamin

  I have installed Compiz on Xubuntu 11.10 with sudo apt-get install compiz compizconfig-settings-manager compiz --replace ccp & In the process the XFCE window decoration theme is overridden by that of Compiz (Gtk) which uses the Adwaita theme instead of the Greybird theme. Since Gtk is doing window decoration, I cannot change it back using the XFCE settings. I just need compiz for scale and window switch and I would like to return window decoration to XFCE (Xfwm4) or to be able to change the Gtk window decoration theme. How can I do that? I have found part of the (workaround) answer already: download Greybird Gtk theme install theme (here is where I failed I think) use dconf-editor to change the Gtk theme in org.gnome.desktop.interface The problem really at stage 2 is where do I place the theme? I tried in ~/.themes/ and then changed the value of gtk-theme in the editor to Greybird. But I saw no change.

  Read the article

• The Best Websites for Creating and Sending Free eCards

  - by Lori Kaufman

  With the holiday season upon us, it’s time to pull out the holiday card list and get writing. However, how would you like to save some money this year and also help save the environment? We’ve assembled a list of websites that allow you to create electronic cards (eCards) you can send (using email, Facebook, or other electronic delivery methods) to friends and family for the holidays, or for any other occasion. Each site listed provides free eCards you can send or has a free option, as well as a paid option. Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows

  Read the article

• How do I make Home and End work in PuTTY SSH with fish shell?

  - by endolith

  Years ago, an Ubuntu update broke this and I've never found a solution. I have fish as my default shell. Ubuntu 12.10 Locally (Gnome Terminal), Home and End keys work fine in both fish and bash. When I log in by SSH using PuTTY, then run bash, Home and End work fine inside of bash. However, when I log in by SSH using PuTTY, in the default fish shell, pressing Home key produces [1~ (sometimes erasing the line, sometimes not). When I press End, it produces [4~. How do I get Home and End to work correctly?

  Read the article

• Fan speeds up and slows down annoyingly on a Dell Latitude 5520

  - by user38175

  I' ve just bought a dell latitude 5520 and installed 11.10, my trouble is that the fan is noisy which is not regular. It is quiet for 1 minute and then speeds up and slows down every 4 seconds for 1 minute : it's very annoying. I tried i8fan things on the Internet but i didn't solve my problem, it seems to work better in windows 7 but i don't use it a lot. Dell technician came and changed the motherboard and the fan but it's still the same. I have to put music on when i'm on my computer... Anyone have the same problem or a solution?

  Read the article

• why would Remmina stop working?

  - by Chris Curvey

  Until sometime last night, I had remmina working fine. I could run RDP through an SSH tunnel and all was well. Then it stopped working. I can get as far as the password dialog for my work machine, but then it just says "Cannot connect to RDP server localhost". I can't even find any logs that look interesting. I've re-installed remmina, cleared my .remmina directory, restarted my machine, and even restarted my gateway. Just to make it really weird, my laptop (which has the same setup -- latest Ubuntu and Remmina) can make the connection just fine. It is even going through the same router, albeit wirelessly. Any thoughts?

  Read the article

• Your Brain by the Numbers [Infographic]

  - by Jason Fitzpatrick

  Your brain is a rather impressive piece of hardware; check out this infographic to see its specs laid out including power consumption, calculation speed, and more. Hit up the link below for the full resolution image. Your Brain by the Numbers [Scientific America] Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary

  Read the article

• Inconsistent booting problem 12.04LTS on Asus U46E RAL7

  - by G. He

  The laptop is dual booting with windows 7 and ubuntu 11.10. For 11.10 to boot, I had to add 'nolapic' in GRUB boot options. I downloaded 12.04LTS LiveCD yesterday and made a CD and a bootable USB stick. With both USB and LiveCD, occasionally I can boot into 12.04. But many times, the boot process stuck at some point. For USB boot, sometime it works. But other times, it seems to stuck right after seeing the message: NMI watchdog enabled. takes one hw-pmu counted [0.408590] #2 The number in [] changes. Some times it stuck at #2, and sometimes at #3. For LiveCD boot, sometime it works. But when it stuck, it stuck at different places. At times, the boot process go directly to a blank screen with a blink '_' at up left corner. Sometime it went a bit further, after showing options to try/install ubuntu then stuck with a blank screen with blink '_'. Anything I can do to get around of this?

  Read the article

• WiFi is not detecting in compaq presario c700

  - by charan

  Hi I have a Compaq Presario c700 laptop,I just installed Ubuntu 10.04 in my laptop. My wireless networks are not showing in network manager. charan@charan-laptop:~$ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) 01:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 02) 02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)

  Read the article

• Is QtQuick.Controls available on Ubuntu 13.10

  - by javascript is future

  I was looking to do UI development in QML, and I really want it to look native. I found the QtQuick.Controls (http://qt-project.org/doc/qt-5.1/qtquickcontrols/qtquickcontrols-index.html), but when I try make a simple application, it tells me that QtQuick.Controls isn't installed. main.qml: import QtQuick 2.1 import QtQuick.Controls 1.0 Rectangle { height: 200 width: 200 } terminal: $ qmlscene main.qml file:///tmp/main.qml:2 module "QtQuick.Controls" is not installed Also, I downloaded the source from https://qt.gitorious.org/qt/qtquickcontrols/source/stable, ran qmake && make, but this returned the following output: cd src/ && ( test -e Makefile || /usr/lib/i386-linux-gnu/qt5/bin/qmake /tmp/qtquickcontrols/src/src.pro -o Makefile ) && make -f Makefile make[1]: Går til katalog '/tmp/qtquickcontrols/src' cd controls/ && ( test -e Makefile || /usr/lib/i386-linux-gnu/qt5/bin/qmake /tmp/qtquickcontrols/src/controls/controls.pro -o Makefile ) && make -f Makefile make[2]: Går til katalog '/tmp/qtquickcontrols/src/controls' g++ -c -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -O2 -fvisibility=hidden -fvisibility-inlines-hidden -std=c++0x -fno-exceptions -Wall -W -D_REENTRANT -fPIC -DQT_NO_XKB -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_PLUGIN -DQT_QUICK_LIB -DQT_QML_LIB -DQT_WIDGETS_LIB -DQT_NETWORK_LIB -DQT_GUI_LIB -DQT_CORE_LIB -I/usr/share/qt5/mkspecs/linux-g++ -I. -I/usr/include/qt5 -I/usr/include/qt5/QtQuick -I/usr/include/qt5/QtQml -I/usr/include/qt5/QtWidgets -I/usr/include/qt5/QtNetwork -I/usr/include/qt5/QtGui -I/usr/include/qt5/QtGui/5.1.1 -I/usr/include/qt5/QtGui/5.1.1/QtGui -I/usr/include/qt5/QtCore -I/usr/include/qt5/QtCore/5.1.1 -I/usr/include/qt5/QtCore/5.1.1/QtCore -I.moc/release-shared -o .obj/release-shared/qquickaction.o qquickaction.cpp qquickaction.cpp:49:39: fatal error: private/qguiapplication_p.h: No such file or directory #include <private/qguiapplication_p.h> ^ Is there some PPA I could use, or do I have to wait for Trusty to get out, before I can use native controls from Qt? Regards

  Read the article

• Getting WLAN on my Laptop to work (Medion MD98300)

  - by Anand Böhmer

  Dear Ubuntu Community, I am having difficulties to get the WLAN Adapter on my Medion 98300 Laptop to work. The WLAN Card seems to be connected through an internal USB Interface and the Card itself had shown up as a wirelles Network while installing Ubuntu. I have tried a few things earlier, but none of my google reasearches have brought me to a working solution... I am quite new to the Linux System and only knoew a couple of terminal commands so far, so I probably have missed out on a few possible solutions. Maybe you can help me? Thank you very much in advance! A fre minimal technical Details: AMD Turion 64 X2 Dual-Core Mobile Technolgie TL-50 NVIDIA GeForce Go 6150 SanDisk 64GB SSD 2GB RAM DDR2 667 nForce Chipset (I forgt the Version, but deductable from the GPU I guess) WiFi: ZyDAS ZD1211B 802.11g Thank's a lot again! :) UPDATE: I tried around myself a little and found a guide on the Linux Mint forums that helped! I already had tried to install the linux backport modules etc. What I finally did was update the linux firmware and run the following command: echo "options acer_wmi wirelles=1" sudo tee /etc/modprobe.d/acer_wmi.conf and rebooted now I found and could connect to networks, but unfortunately I found, that the link quality was very bad, around 40 to 50. Eventhough my Router is running at high power and is only 6 Meters away! I then switched a few channels, but that did not improve much. Before, under Windows, I had a very good link quality and had the entire 16mbit/s internet connection at disposal, now I can only get about 3-5Mbit/s. better then nothing, but still pretty bad! The "TX power" is fixed on 20dBm and iwconfig says, that the "Power Management" is off... Maybe the power of the module is set too low?... UPDATE2: I figured that 20dBm is a normal power output. I even tried to change the power using iwconfig wlan0 txpower INTEGERHERE but, obviously my "Card" does not support more then 20. More would probably be illegal as well, so I won't even use more then 20. I guess that I will have to figure out a way, or maybe just switch cards. Are the Mailboard-USB-Connectors on a laptop of the same property as the standard external ones? If so, I could simply solder a micro Wirelless N Adapter onto the board :)

  Read the article

• Why would 70-persistent-net.rules have no effect?

  - by Wes Felter

  I've got a saucy server with a lot of NICs and they end up with weird names like "rename19". I know interface names can be changed by modifying the /etc/udev/rules.d/70-persistent-net.rules file. The first clue that something is wrong is that that file did not exist even though it's supposed to be created automatically. So I decided to write my own based on advice from Linux From Scratch: ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:06:00.0", NAME="eth0" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:06:00.1", NAME="eth1" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:06:00.2", NAME="eth2" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:06:00.3", NAME="eth3" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:0c:00.0", NAME="mezz0" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:0c:00.1", NAME="mezz1" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:1b:00.0", NAME="slot1a" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:1b:00.1", NAME="slot1b" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:20:00.0", NAME="slot2a" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:20:00.1", NAME="slot2b" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:11:00.0", NAME="slot3a" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:11:00.1", NAME="slot3b" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:8b:00.0", NAME="slot4a" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:8b:00.1", NAME="slot4b" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:90:00.0", NAME="slot5a" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:90:00.1", NAME="slot5b" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:95:00.0", NAME="slot6a" ACTION=="add", SUBSYSTEM=="net", BUS=="pci", KERNELS=="0000:95:00.1", NAME="slot6b" (I'm matching on PCI IDs instead of MAC addresses because I have multiple identical machines that I want to apply this configuration to.) After rebooting, nothing has changed. It's like these rules aren't even being read. There's not much going on in dmesg either: $ dmesg | grep udev [ 3.196629] systemd-udevd[323]: starting version 204 [ 6.719140] systemd-udevd[550]: starting version 204 [ 38.695050] init: udev-fallback-graphics main process (1658) terminated with status 1

  Read the article

• Why do webpages take longer to loo in ubuntu 12.04 than Windows 7

  - by Emil Abraham

  For example, when I click on a Facebook picture, the picture remains pixelated for about 30 seconds, then starts to clear up. Or when I watch YouTube videos, I can't watch them on HD without running into buffer issues. Windows 7 is just much snappier. It might be an issue with the graphics card. Dualbooting Windows 7 64bit & Ubuntu 12.04 64 bit Specs: CPU: Intel® Core™ i7-2630QM CPU @ 2.00GHz × 8 RAM: 8GB DDR3 HDD: 50 GB to Ubuntu & Remaining 1.5 TB to Windows The interesting part: Graphics Card: On System Settings in Ubuntu: Intel® Sandybridge Mobile Graphics Card: What it should be: Radeon™ HD 7690M XT switchable graphics with 1024MB GDDR5 and up to 5093MB total graphics memory

  Read the article

• Why is Ubuntu's clock getting slower or faster?

  - by ændrük

  Ubuntu's clock is off by about a half hour: Where do I even start troubleshooting this? It's allegedly being set "automatically from the Internet". How can I verify that "the Internet" knows what time it is? Details Ubuntu has had plenty of time to communicate with the Internet: $ date; uptime Fri May 18 05:56:00 PDT 2012 05:56:00 up 12 days, 10:48, 2 users, load average: 0.61, 0.96, 1.15 This time server I found via a web search does appear to know the correct time: $ date; ntpdate -q north-america.pool.ntp.org Fri May 18 05:56:09 PDT 2012 server 208.38.65.37, stratum 2, offset 1752.625337, delay 0.10558 server 46.166.138.172, stratum 2, offset 1752.648597, delay 0.10629 server 205.189.158.228, stratum 3, offset 1752.672466, delay 0.11829 18 May 05:56:18 ntpdate[29752]: step time server 208.38.65.37 offset 1752.625337 sec There aren't any reported errors related to NTP: $ grep -ic ntp /var/log/syslog 0 After rebooting, the time was automatically corrected and the following appeared in /var/log/syslog: May 18 17:58:12 aux ntpdate[1891]: step time server 91.189.94.4 offset 1838.497277 sec A log of the offset reported by ntpdate reveals that the clock is drifting by about 9 seconds every hour: $ while true; do ntpdate-debian -q | tail -n 1 >> 'drift.log'; sleep 16m; done ^C $ r -e ' attach(read.table("drift.log", header=FALSE)) clock <- as.POSIXct(paste(V1, V2, V3), format="%d %b %H:%M:%S") fit <- lm(V10~clock) png("drift.png") plot(clock, V10, xlab="Clock time", ylab="Time server offset (s)") abline(fit) mtext(sprintf("Drift rate: %.2f s/hr", fit$coefficients[[2]]*3600)) '

  Read the article

• OpenOffice doesn't work

  - by dn.usenet

  I installed OpenOffice on 12.04, and set it as the default utility for spreadsheets, but it doesn't run at all. While trying to troubleshoot, I read that it is not recommended to install it alongside LibreOffice. I am about to uninstall OpenOffice because I don't know how to get it working, and LibreOffice is opening my spreadsheet just fine. But just out of curiosity, I also read that I should try deleting .openoffice.org folder; but from where? I don't see it under /usr/lib, nor under my /home.

  Read the article

• Ubuntu Server 12 HD full

  - by julio

  I have a server with Ubuntu Server 12, today it stops some services and I found some comments about full disk, so I made a df -h S.files Size Used Disp Use% /dev/mapper/ubuntu-root 455G 434G 0 100% / udev 1,7G 4,0K 1,7G 1% /dev tmpfs 689M 4,2M 685M 1% /run none 5,0M 0 5,0M 0% /run/lock none 1,7G 0 1,7G 0% /run/shm /dev/sda1 228M 51M 166M 24% /boot overflow 1,0M 0 1,0M 0% /tmp Then I tried to delete some files but I made it from a windows remote computer just right clic and "delete" option on files, but HD still full. Is in Ubuntu Server any Trash file or what could be happeing?

  Read the article

• Boot from Ubuntu ISO on a hfsplus partition (macbook pro)

  - by user279771

  I would like to be able to boot from an ISO stored on an HFS+ partition (the main partition on my macbook pro). Here is what I've done so far: (writing in shorthand :D) grub> insmod hfs,hfsplus,loopback,part_gpt grub> loopback loop (hd0,gpt2)/location/to/img.io grub> configfile (loop)/boot/grub/loopback.cfg ... This does not work. tab-complete of the (loop) path does not work... However, this does work (tab-complete and all) if the iso comes from my ext3 partition. For particular reasons, I can't have the iso images on the ext3 partition, they need to be kept on the hfs+ partition. What should be done?

  Read the article

• Ubuntu - Black Screen After Suspend

  - by EssAm

  I used Ubuntu with no problems and I upgraded to 11.10 and everything was fine. But when I did my first suspend I was not able to boot again, all I got was a black screen no bios screen, nothing just blank, I tried doing hard reset but when I power on again same happens. I tried ctrl+alt+delete F1-F12 but i think the keyboard is not working, also tried booting from CD but all I got was blank screen, the hard disk light is not blinking at all so i'm assuming it's not trying to boot. My laptop is Toshiba satellite with ATI Radeon graphics. Hibernate was working fine though. I searched the net for solutions but with no luck. Any ideas?

  Read the article

< Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >