Search Results

Search found 10961 results on 439 pages for 'internal dns'.

Page 362/439 | < Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >

• On clients use generic driver for printer shared by CUPS

  - by Daniel

  I know this worked really easy with a recent CUPS version some years ago. Unfortunately I fail to do the following with latest CUPS nowadays. How to share a printer without using printer specific drivers on the clients with CUPS? The printer is a Samsung ML-2010. The important fact is that it needs a quite specific library for printing called splix. That is installed on the server and prints well. What makes trouble is using that printer over the network. I found out how to use Avahi under Linux to make use of DNSSD to advertise and discover printers. But as far as I understand the new CUPS offers the internal driver interface on the network. This has 2 major issues: anybody can fiddle with the driver and I don't trust any uncommon printer library to be "network secure" anyone who wants to use my printer including guests needs to install the specific drivers first I remember the old days when I could enable "Share this printer" on the CUPS server and all clients would magically detect the printer and just send their job data to the server and have it do the driver stuff. After everything a read I guess this is related to the changes Apple introduced with CUPS including dropping of the integrated network discovery protocol. If it helps: Server: Ubuntu LTS 12.04 Server with CUPS 1.5.3 Client: Arch Linux with current CUPS 1.6.1 On another box with Ubuntu the printer was setup automatically at least but the mechanism used the Splix library for that.

  Read the article

• Router vs switch in a LAN [closed]

  - by servernewbie

  If I have a LAN and and connect it with a switch, I understand it uses a CAM table to route packets in layer 2 (by saving mac to port relations). So far all good. However, when using a router for a LAN (ONLY for a LAN, not to connect it to "the outside" WAN/internet/etc) I get a bit confused as to how it internally processes packets. I would first split this into two router scenarios: Router with buit-in switch In this scenario, I would expect that it will act exactly as a switch with a CAM table internally. This would probably benefit a bit in speed (guessing here?) compared to the next option. Router without built-in switch Here is where I get confused. If hostA wants to send a packet to hostB, it will ARP to find hostB's MAC address and send it there. Now, if we had a switch (above scenario) this would be easy. But how does it work now in a router WITHOUT a switch? If I would guess, hostA would send an Ethernet frame with hostB's MAC address to the line. The router would fetch the packet (even though the router has another MAC address, it would still fetch this packet even if it only contains hostB's MAC address). It would strip the Ethernet frame header and check the IP, and then check its own internal ARP table again for the MAC address. Now, this would seem like a waste of resources compared to a router with a built-in switch. But maybe it does not work like that at all. Does it also contain a CAM table? If that would be true, what would then the difference between these two routers really be?

  Read the article

• Log shipping on select tables.

  - by Scott Chamberlain

  I know I am most likely using incorrect terminology so please correct me if I use the wrong terms so I can search better. We have a very large database at a client's site and we would like to have up to date copies of some of the tables sent across the internet to our servers at our office. We would like to only copy a few of the tables because the bandwidth requirement to do log shipping of the entire database (our current solution) is too high. Also replication directly to our servers is out of the question as our servers are not accessible from the internet and management does not want to do replication (more on that later). One possible Idea we had is to do some form of replication on the tables we need to another database on the same server and do log shipping of that second smaller database but management is concerned that the clients have broken replication (it was between two servers on their internal network however) on us in the past and would like to stay away from it if possible. Any recommendations would be greatly appreciated. If using some form of replication is the only solution, I am not against replication, I just need compelling arguments to convince management to do it. This is to be set up on multiple sites that are running either Sql2005 or Sql2008 we will have both versions on our end to restore the data to so that is not a issue. Thank you.

  Read the article

• Measuring performance indicators on a cluster

  - by Aditya Singh

  My architecture is based on Amazon. A ELB load balancer balances POST requests among m1.large instances. Every instance has a nginx server on port 80 which distributes the requests to 4 python-tornado servers on backend which handle the request. These tornado servers are taking about 5 - 10ms to respond to one request but this is the internal compute time of every request. I want to put this thing on test and i want to measure the response time from ELB to upstream and back and how does it vary when the QPS throughput is increased and plot a graph of Time vs. QPS vs. Latency and other factors like CPU and Memory. Is there a software to do that or should i log everything somewhere with latency checks and then analyze the whole log to get the stuff out. I would also need to write a self-monitor which keeps checking the whole response time. Is it possible to do it with a script from within the server. If so, will it be accurate ?

  Read the article

• What are these isolated resource requests in Apache's access_log?

  - by Greg

  I was looking at my Apache access log and came across some strange requests. A single IP address will access several resources (mostly css style sheets and images), but no actual pages. Sometimes they are requesting a resource that no longer exists on the server, or one that is still under the web root but no longer used (e.g. a resource in an old WordPress theme). Also: The requests list no referrer I get no useful information on the IP address by looking it up There doesn't seem to be any pattern among the IP addresses that are making these requests (e.g. different countries) Are these just links from a stale cache somewhere? Could it be a sign of an attack of some sort? Here is a typical example: GET /wp-content/themes/my-theme/images/old-image.gif HTTP/1.1" 500 809 "-" "Mozilla/4.0 (compatible;)" This was one of about 10 similar requests, some for existing resources, some for older resources. There is no other sign of this IP address in access_log. Note the internal server error, which is a topic for a different thread. What I'm asking here is where would isolated requests like this come from?

  Read the article

• Two servers, two domains, one ip. mod_proxy beginner

  - by Gutsav

  I run two virtual web servers (both running apache2 on debian). I have just one external IP, but two domains, and I want a domain going to each of the servers. I've understood that I need a Reverse Proxy, and I enabled both the mod_proxy and the mod_proxy_http modules on the "primary server". Do I need to enable anything on the "secondary server"? I also understood that I need to write some things in a virtual host file, but what? On the primary server, I have a virtual host file for one of the domains, and some for subdomains. I want domain1.tld to go to the primary server (port 80 is forwarded to it, so that works) and domain2.tld to go to the other server (internal ip 192.168.0.x). No ports needs to be forwarded to it, right? So, what to add and in which virtual host file? Or a new one? Other questions suggest adding ProxyPass and ProxyPassReverse, but I'm lost anyway, and I just don't understand the apache documentation. Thanks in advance

  Read the article

• What are good systems for managing PHP/MySQL infrastructure?

  - by sbrattla

  I work in a company which is about to migrate most applications from in-house custom built Java/Tomcat applications to Drupal. Due to company policies, applications and websites need to run on in-house servers. This means that we need infrastructure for Drupal (PHP/MySQL) applications. This must have been solved a million times already. I believe this is what web-hosting companies does every day. Even though we work on a much smaller scale than web-hosting companies, i assume it would make sense to look at the task as if we're going to have an internal small-scale web-hosting company. This means that the guys in IT operations could be "responsible" for "offering" web-hosting, while developers could use these "services". We have three environments; dev(elopment), test and prod(uction). It would make sense that developers could log in to a system and create/edit/delete dev and test sites as they'd like. Production sites should be available through the same system, but only available to IT ops. We need to work with clusters of web servers, meaning that an administration system should be capable of creating/editing/deleting sites across multiple servers. I know there's no "this is it" answer to my question; but what would be a good place to start to get going with this? Apart from the actual hardware, what would be a good administration system for this?

  Read the article

• Moving Microsoft Exchange server to the private network.

  - by Alexey Shatygin

  In one of the offices, we have a 50-computers network, which had only one server machine: Windows 2003 Server Microsoft ISA Server Microsoft Exchange 2003 This server worked as a gateway (proxy server), mail server, file server, firewall and domain controller. It had two network interfaces, one for WAN (let's say 222.222.222.222) and one for LAN (192.168.1.1). I set up a Linux box to be the gateway (without a proxy), so the Linux box now has the following interfaces: 222.222.222.222 (our external IP, we removed it from the Windows machine) and 192.168.1.100 (internal IP), but we need to keep the old Windows server as a mail server and a proxy for some of our users, until we prepare another Linux machine for that, so I need the mail server on that machine to be available from the Internet. I set up iptables rules to redirect all the incoming connections on the 25th and 110th ports of our external IP to 192.168.1.1:25 and 192.168.1.1:110 and when I try to telnet our SMTP service telnet 222.222.222.222 25 I get the greetings from our windows server's (192.168.1.1) SMTP service, and that's works fine. But when I telnet POP3 service telnet 222.222.222.222 110 I only get the blank black screen and the connection seem to disappear if I press any button. I've checked the ISA rules - everything seems to be the same for 110th and 25th ports. When I telnet on 110th ports of our Windows server from our new gateway machine like this: telnet 192.168.1.1 110 I get the acces to it's POP3 service: +OK Microsoft Exchange Server 2003 POP3 server version 6.5.7638.1 (...) ready. What sould I do, to make the POP3 service available through our new gateway?

  Read the article

• Manual NAT on Checkpoint (Redirect all http requests to a local web server)

  - by kulakli

  Hi, We have a proxy server in internal network and I want to redirect all internet http requests to a web server in local network. It'll be like a Network Billboard that say "No direct connection is available. Set up your proxy etc." For example: A user starts the computer Opens the browser Trys to open www.google.com Should see web server output on local network Trys another web site on internet Should see web server output on local network Sets up proxy Trys to connect to a web site Web site should be loaded I have added a simple manual NAT rule to address translation in Checkpoint firewall but it simply does not work. Here is my address translation rule Source Destination Service T.Source T.Destination T.Service MY_PC A_GOOGLE_IP ALL ORIGINAL INT_WEB_SRV ORIGINAL Then when I ping A_GOOGLE_IP, replies come from INT_WEB_SRV, as I expected. However, when I try to connect A_GOOGLE_IP from browser (http://A_GOOGLE_IP), No replies come from SYN_SENT and falls into timeout. When I look at the firewall log of INT_WEB_SRV, I can see the incoming connection requests from MY_PC is accepted and NO denies. By the way, there is no problem to see INT_WEB_SRV (http://INT_WEB_SRV) from browser. My understanding is, my nat rule at checkpoint NGX R60 does not include return packets. I definitely need some help. Regards, Burak

  Read the article

• RAID 10 or RAID 5 for multiple VMs - what is the best choice?

  - by Lars Fastrup

  I have just ordered a new rig for my business. We do a lot of software development for Microsoft SharePoint and need the rig to run several virtual machines for development and test purposes. We will be using the free VMware ESXi for virtualization. For a start, we plan to build and start the following VMs - all with Windows Server 2008 R2 x64: Active Directory server MS SQL Server 2008 R2 Automated Build Server SharePoint 2010 Server for hosting our public Web site and our internal Intranet for a few people. The load on this server is going to be quite insignificant. 2xSharePoint 2007 development server 2xSharePoint 2010 development server Beyond that we will need to build several SharePoint farms for testing purposes. These VMs will only be started when needed. The specs of the new rig is: Dell R610 rack server 2xIntel XEON E5620 48GB RAM 6x146GB SAS drives Dell H700 RAID controller We believe the new server is going to make our VMs perform a lot better than our existing setup (2xIntel XEON, 16GB RAM, 2x500 GB SATA in RAID 1). But we are not sure about the RAID level for the new rig. Should we go for having the the 6x146GB SAS drives in a RAID 10 configuration or a RAID 5 configuration? RAID 10 seems to offer better write performance and lower risk of a RAID failure. But it comes at a cost of less drive space. Do we need RAID 10 or would RAID 5 also be a good choice for us?

  Read the article

• Need advise for choosing software\hardware for virtualization.

  - by Anatoly

  Currently we have these servers : Windows SBS 2003 premium on IBM X266 double Xeon F43, 2GB ram. DC, exchange (70 users), Mssql. Windows 2003 R2 32bit on IBM x3400 with double XEON E5310 and 4GB ram. Terminal server (40+ users), ERP application based on uniPaaS platform from Magicsoftware, and Pervasive sql. Ubuntu 8.04 (simple pc box) with squid proxy, GLPI system and PHPBB3 forum for internal use. Recently number of concurrent users on Terminal server passed 40 users in rush hours and it gets stuck frequently. Therefore we need an upgrade. I think about transfer all physical servers to virtual servers based on cluster of 2 physical servers for reducing downtime. I think we will grow till 50-60 concurrent terminal users in rush hours. I also plan to virtualize 10-15 Win XP/7 workstation (office,ERP etc), and there is a little probability for Asterisk\Hylafax for 100 users (if it possible on same VM). Also we need NAS storage for 2-3TB. What hardware upgrade/purchase we need for complete this task? Which VM solution is preferable VmWare or Hyper-V? What backup software should we choose? Acronis or something another? Thank you in advance.

  Read the article

• Grayed-Out Sleep and Hibernate Options on Windows 7 After Updating Graphics Driver

  - by Maxim Zaslavsky

  I have a Gateway M275 Tablet PC, on which I've installed Windows 7 Ultimate. The laptop is quite old, so there aren't any Win7 drivers for it, not to mention any Vista drivers. Win7 has been working for some time, but I noticed that my video output wasn't working. I went into Device Manager and found that I didn't have a driver for my video card: it just recognized it as the standard one. I searched online and found an XP driver for it, released by Gateway. Device Manager accepted this driver and prompted me to reboot. After that, I noticed that my Sleep and Hibernate options in the Shut Down menu have been grayed-out. I looked online and found that many people are attributing this to display drivers, as such an old driver would surely not be compatible with the standby procedures Windows 7 uses. To make it clear: I was able to Sleep and Hibernate before updating the drivers; now, I can't. Running powercfg /a gives me, "An internal system component has disabled this standby state," for each available standby mode. Is there some way that the driver can be modified to support hibernation? The new driver fixed my video output problem, but I guess hibernation is more important for me. If not, what steps should I take to remove the driver and just leave the standard Windows one, which previously supported hibernation and sleep on this computer? Thanks in advance.

  Read the article

• Allowing directory view/traversal for a specific VirtualHost in Apache 2.2

  - by warren

  I have the following vhost configured: <VirtualHost *:80> DocumentRoot /var/www/myvhost ServerName myv.host.com ServerAlias myv.host.com ErrorLog logs/myvhost-error_log CustomLog logs/myvhost-access_log combined ServerAdmin [email protected] <Directory /var/www/myvhost> AllowOverride All Options +Indexes </Directory> </VirtualHost> The configuration appears to be correct from the apachectl tool's perspective. However, I cannot get a directory listing on that vhost: Forbidden You don't have permission to access / on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. The error log shows the following: [Wed Mar 07 19:23:33 2012] [error] [client 66.6.145.214] Directory index forbidden by Options directive: /var/www/****** update2 More recently, the following is now kicking-into the error.log: [Wed Mar 07 20:16:10 2012] [error] [client 192.152.243.233] Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that RewriteRule directive is forbidden: /var/www/error/noindex.html update3 Today, the following is getting kicked-out: [Thu Mar 08 14:05:56 2012] [error] [client 66.6.145.214] Directory index forbidden by Options directive: /var/www/<mydir> [Thu Mar 08 14:05:56 2012] [error] [client 66.6.145.214] Options FollowSymLinks or SymLinksIfOwnerMatch is off which implies that RewriteRule directive is forbidden: /var/www/error/noindex.html [Thu Mar 08 14:05:57 2012] [error] [client 66.6.145.214] Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace. This is after modifying the vhosts.conf file thusly: <VirtualHost *:80> DocumentRoot /var/www/<mydir> ServerName myhost ServerAlias myhost ErrorLog logs/myhost-error_log CustomLog logs/myhost-access_log combined ServerAdmin admin@myhost <Directory "/var/www/<mydir>"> Options All +Indexes +FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> What is missing? update 4 All subdirectories of the root directory do directory listings properly - it is only the root which cannot.

  Read the article

• How can I monitor VNC via Nagios?

  - by atroon

  I have a number of remote sites which have VNC running on a few computers for support purposes. They are (obviously) only available on our internal network. I am using Nagios to keep track of all the systems in the network and I want to have it check to make sure the VNC server is running on the appropriate hosts. There is a 'check_vnc' plugin available here but it relies on VNC Snapshot which I don't want to use. Certainly I could use it, but it adds more complexity and dependency, which I want to avoid. It seems simpler to just use check_tcp to make sure I get the proper response to a connection request for VNC, e.g. port 5900, send a connect string, get back framebuffer info. My real question, I suppose, is this: What is the 'proper' generic connect string for VNC (I use both UltraVNC and RealVNC) and what is the expected response? If it's really easier to use the VNC Snapshot and check_vnc, let me know. I just can't imagine that a string of text isn't easier, faster, and less bandwidth intensive to monitor.

  Read the article

• PC -> TV HDMI suddenly doesn't work, any other option does

  - by XSlicer

  So my parents wanted to connect their PC to their TV, so they bought a 10m (35 ft) cable. It all worked perfectly. Then my mom tripped over the cable, breaking it. She somehow got a free replacement, but at the same time some more expensive one from an uncle. Now the problem is that this suddenly doesn't work anymore (TV saying "Format not supported"). I've tried several other things to pinpoint the actual problem, but none brought me something conslusive: PC (hdmi) to TV doesn't work (both cables) PC (hdmi) to TV doesn't work (short cable) Laptop (hdmi) to TV work (same cables) BluRay (hdmi) to TV works (same cables) PC (hdmi) to monitor works (same cables) PC (DVI w/ adapter HDMI) to TV works (same cables) I've tried different ports, tried Linux, reinstalling drivers (the graphics card is internal using an i5 sandy bridge. Normally it's running Windows 7 Home Prem, the TV being a Philips 37PFL7605H). So basically, everything works, except that thing what we want. The only things I am thinking of is that the sound is interfering or that the HDMI-output is somehow broken. Or is it anything else? I'm kind of lost.

  Read the article

• VirtualBox with Ubuntu Server guest can't ping outside

  - by Danidan

  Here's my situation: an Ubuntu 12.04 Host running VirtualBox; two guest VMs running Ubuntu Server 12.04 home network, so my Host pc has a wireless connection to the router of my ISP. My problem is in one of the virtual machines: it has 3 NICs, one in NAT mode and the others in Host Only mode. My purpose is to use eth0 (NAT) for Internet access and eth1, eth2 (Host Only) for management of internal virtual network (eth1 uses a VBoxNet with this IP 192.168.69.254). Whenever I try to $ping 8.8.8.8 I get Destination Host Unreachable. While if I $ping 192.168.69.10, that is the IP of the other VM, it works. I can't also ping my Host nor my router My /etc/network/interfaces file is: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 192.168.69.1 netmask 255.255.255.0 auto eth2 iface ifconfig $IFACE 0.0.0.0 up up ip link set $IFACE promisc on down ip link set $IFASE promisc off down ifconfig $IFACE down $route -n returns: Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.0.2.2 0.0.0.0 UG 100 0 0 eth0 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.69.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Forgetting for now what eth2 needs to do and its setup, why I can't go outside the Host box? What can I do to help you helping me? :-)

  Read the article

• VPN sharing on Mac OS X 10.5 machine

  - by Jens

  I have a rather weird problem. I want to share a VPN connection that has been established by my Mac OS X 10.5 computer with another machine in my network. This is what I did: In the /etc/hostcongig file on the main computer I added the line: IPFORWARDING=-YES- I assigned a fixed IP address to my computer (192.168.178.30), a fixed one to the other machine (192.168.178.60) and my computer's IP address as gateway on the other machine. I connected to my VPN using the internal Mac OS X VPN client (PPTP connection) I run this script: #!/bin/sh natd -same_ports -use_sockets -unregistered_only -dynamic -interface ppp0 -clamp_mss ipfw -f flush ipfw add divert natd ip from any to any via ppp0 ipfw add pass all from any to any sysctl -w net.inet.ip.forwarding=1 Source: Using (and sharing) a VPN connection on your Mac Now everthing works smootly, however speed is an issue. I get 1,8 MBit/s on my main machine and only 0,3 - 0,6 MBit/s on the other one. My question: What could possibly be wrong? Do I have to tweak MTU settings, is there any packet inspection ongoing that needs time....? Any help appreciated!

  Read the article

• .htaccess, mod_rewrite Issue

  - by Shoaibi

  What i want: Force www [works] Restrict access to .inc.php [works] Force redirection of abc.php to /abc/ Removal of extension from url Add a trailing slash if needed old .htaccess : Options +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / ### Force www RewriteCond %{HTTP_HOST} ^example\.net$ RewriteRule ^(.*)$ http://www\.example\.net/$1 [L,R=301] ### Restrict access RewriteCond %{REQUEST_URI} ^/(.*)\.inc\.php$ [NC] RewriteRule .* - [F,L] #### Remove extension: RewriteRule ^(.*)/$ /$1.php [L,R=301] ######### Trailing slash: RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_URI} !(.*)/$ RewriteRule ^(.*)$ http://www.example.net/$1/ [R=301,L] </IfModule> New .htaccess: Options +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / ### Force www RewriteCond %{HTTP_HOST} ^example\.net$ RewriteRule ^(.*)$ http://www\.example\.net/$1 [L,R=301] ### Restrict access RewriteCond %{REQUEST_URI} ^/(.*)\.inc\.php$ [NC] RewriteRule .* - [F,L] #### Remove extension: RewriteCond %{REQUEST_FILENAME} \.php$ RewriteCond %{REQUEST_FILENAME} -f RewriteRule (.*)\.php$ /$1/ [L,R=301] #### Map pseudo-directory to PHP file RewriteCond %{REQUEST_FILENAME}\.php -f RewriteRule (.*) /$1.php [L] ######### Trailing slash: RewriteCond %{REQUEST_FILENAME} -d RewriteCond %{REQUEST_FILENAME} !/$ RewriteRule (.*) $1/ [L,R=301] </IfModule> errorlog: Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: http://www.example.net/ Rewrite.log: http://pastebin.com/x5PKeJHB

  Read the article

• Permission denied (publickey,gssapi-with-mic,password) ssh error

  - by zentenk

  Heads up I'm a noob with linux and networking. I set up a ubuntu server and I have a static ip for my network. When I try to connect to the server at home (external), it prompts me to log in. I supply the correct password (or incorrect pw), I get the error Permission denied, please try again. and after 3 times I get Permission denied (publickey,gssapi-with-mic,password) I am however able to connect with SSH from another computer in the same network with ssh < internal ip of server > I'm connecting with mac os x and my config file is vanilla. Note: During installation of ubuntu it says I don't have a default route or something while doing auto network configuration, but I ignored it and continued the installation, could this be the problem? EDIT: I have tried the below, I have nothing in hosts.allow and also iptables shows the ports that I have allowed, which is 22. I checked the auth.log, and there is nothing when I connect to it remotely (even when it says permission denied). I have tried connecting to it internally and the correct authentication logs show. Any idea whats wrong?

  Read the article

• What's the best way to clone multiple PCs from one machine?

  - by Jason T.

  Where I work we have dozens and dozens of old ThinkPad laptops. A lot of these can be reused but not for our needs. They have been long since replaced. The higher-ups have decided to donate them to charity. For better or for worse I have been tasked with reimaging them. I took a laptop and installed the factory copy of Windows, updated it, configured it appropriately. Now I'm trying to reimage it to dozens of other laptops. What's some good software to do this? First I used clonezilla to clone the hdd in the laptop to an internal drive in an external enclosure and it worked. Then I tried taking the base image out and connecting it externally to a laptop that needed to be imaged and I got it to work a few times. So far so good, right? Well once I informed my boss of my findings and what I would want to do then the images started to not work on new laptops. One of three things would happen: The Thinkpads would just blink at me and Windows wouldn't load. Or Windows would load but freeze within two minutes. Last but not least the laptops would BSOD during the Windows XP bootup. These laptops are not going to be used by the company. They're going to charity. So can anyone else recommend a way to reimage multiple laptops?

  Read the article

• Network topology for both direct and routed traffic between two nodes

  - by IndigoFire

  Despite it's small size, this is the most difficult network design problem I've faced. There are three nodes in this network: PC running Windows XP with an internal WiFi adapter.Base station with both WiFi and a Wireless Modem (WiModem)Mobile device with both WiFi and WiModem The modem is a low-bandwidth but high-reliability connection. We'd like to use WiFi for high-bandwidth stuff like file transfers when the mobile is nearby, and the modem for control information. Here's the tricky part: we'd like the wifi traffic to go directly from the mobile to the PC, as rebroadcasting packets on the same WiFi channel takes up double the bandwidth. We can do that with a manual configuration by giving the both the PC and the base station two IP addresses for their WiFi interfaces: one on a subnet shared with the mobile, and one on their own subnet. The routes on the PC are set up so that any traffic going to the mobile via WiModem goes through the secondary IP address so that return traffic from the mobile also goes through the WiModem. Here's what that looks like: PC WiFi 1: 192.168.2.10/24 WiFi 2: 192.168.3.10/24 Default route: 192.168.2.1 Base Station WiFi 1: 192.168.2.1/24 WiFi 2: 192.168.3.1/24 WiModem: 192.168.4.1/24 Mobile WiFi: 192.168.3.20/24 WiModem: 192.168.4.20/24 We'd like to move to having the base station automatically configure the mobile and PC, as the manual setup is problematic when you start having multiple mobiles and PCs. This means that the PC can only have 1 IP address and needs to be treated as being pretty simple. Is it possible to have a setup driven by DHCP on the base station that is efficient with bandwidth?

  Read the article

• How to Deploy an ASP.NET Web API- and Browser-based Application to a Production Environment [closed]

  - by lmttag

  Possible Duplicate: How to Deploy an ASP.NET Web API- and Browser-based Application to a Production Environment We have an ASP.NET Web API server that serves up a SQL Server data driven website. The API uses JSON to transfer data from SQL Server to the front end. We need to move it to an internal production environment (nothing will be exposed on the public Internet) and we’re having problems - or just not understanding what needs to be done. There are two domains: The corporate domain - where all users login normally. The process domain - contains the database the Web API needs to access. The IT staff wants to put a DMZ between the two domains to house the IIS app and shield the users on the corporate domain from having access into the process domain directly. The ideal configuration is: corp domain (end users) <–> firewall (open port 80) <–> DMZ (web server running IIS) <–> firewall (open port 80 or 1433????) <–> process domain (IIS for Web API and SQL Server) We don’t really understand how to deploy our browser/Web API application in this scenario. Do we need to break up our application so that all the client code is on the IIS server in the DMZ, while the Web API gets installed on the server in the process domain? Does the entire app (client code and Web API) stay together on the IIS server in the DMZ, which then somehow accesses the SQL Server instance to get data? From the IIS server and app in the DMZ, would you simply access the Web API on the server in the process domain by going to http://server/appname/api/getitmes? In the second firewall between the DMZ and the process domain, would you have to open port 1433 or just port 80 since the Web API is a HTTP endpoint? Or, is there some better way of deployment (i.e., how ASP.NET Web API single page applications written all in HTML5 and JavaScript supposed to be deployed to production environments?)? NB: The servers are Win2k8 R2, SQL Server 2k8 R2, and IIS 7.5.

  Read the article

• How to setup ping between XP guest from Win8 Host using Hyper-V virtual swtich

  - by rism

  Hyper-V client is installed on a Win8 Pro 64 bit box and a VM running XP has been created within that with an internal virtual swtich. The VM can be booted and accessed and there is a default virtual NIC within it with dynamic IP of 169.254.x.x which i have changed to be a static IP of 192.168.0.12/255.255.255.0 confirmed via ipconfig on the XP guest. The Host has IP of 192.168.0.7/255.255.255.0. Both host and guest have their firewalls disabled for simplicity. I cant ping guest from host nor host from guest. TTL timeout. And with regard to Hyper-V and VMs I dont know what to do next. Both are in same workgroup (as per name) but since they cant ping I guess that means nothing. .... My objective is to share a folder on VM so I can install a 32bit accountancy app that wont run on Win8/7 so if there is a more simplistic way then Im all ears but typically a peer to peer is very simple.

  Read the article

• Configuring nginx to check for hard files in only a few directories,

  - by Evan Carroll

  For a node.js project I'm doing, I have a tree like this. +-- public ¦   +-- components ¦   +-- css ¦   +-- img +-- routes +-- views Essentially, I have the root to be set to public. I want all requests destined to /components/ /css/ /img/ To check to see if their appropriate destinations exist on disk. However, I don't want requests to other directories to even run an IO operation, /foo/asdf /bar /baz/index.html None of those should result in the disk being touched. I have a stansa that does the proxy to node.js, location @proxy { internal; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-NginX-Proxy true; proxy_pass http://localhost:3030; proxy_redirect off; } I just would like to know how to arrange this. My problem would be easily solved if try_files took a single argument, but it always wants a file first. location /components/ { try_files $uri, @proxy } location /css/ { try_files $uri, @proxy } location /img/ { try_files $uri, @proxy } However, there is nothing that I can find that will give me, location / { try_files @proxy } How do I get the effect I want?

  Read the article

• Cannot write to directory after taking ownership

  - by jeff charles

  I had a directory on an internal hard-drive that was created in an old Windows 7 install. After re-installing my operating system, when I try to create a new directory inside that directory, I get an Access Denied message. This isn't a protected directory, just a random directory I created at the drive root (that drive was not the C drive in either install). I tried to take ownership by opening folder properties, going to the Security tab, clicking on Advanced, going to Owner tab, clicking on Edit, selecting my user account, checking Replace owner on subcontainers and objects, and clicking Apply. There were no error messages and I closed the dialogs. I rebooted, checked the owner on that folder and a couple subfolders and it appears to be set correctly. I am still getting an Access Denied message however when trying to create a directory in it. I've also tried using attrib -R . to remove any possible readonly attribute inside the directory in an admin command prompt but am still unable to create a directory using a non-admin prompt (it does work in an admin prompt). Is there anything I can do to get write access to that folder and it's subcontents in a non-elevated context without disabling UAC?

  Read the article

< Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >