Search Results

Search found 11180 results on 448 pages for 'serial port'.

Page 362/448 | < Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >

• How do multiple displays work on a AMD 785G / ATI HD 4200 motherboard?

  - by aireq

  I just ordered a ASUS M4A785TD-V EVO which has the AMD 785G chipset and HD4200 integrated graphic. The board has VGA, DVI, and HDMI outputs. I'm wondering how many outputs I can run at once, and from what connectors? My guess is that I can only use the VGA, and either the DVI or the HDMI in a dual setup. But not the HDMI and the DVI at the same time. Is this correct? If I have devices plugged into both the HDMI and the DVI ports is there a way to choose between which port I want to use? I have a dual 19" monitor setup, as well as a LCD TV. I'd like to run the VGA and the DVI into my two monitors, and then the HDMI to my TV. Then when I want to watch something on the TV I'd like to be able to switch over from the DVI to the HDMI. Is this possible with out crawling under my desk and unplugging/plugging things in? Update I found the following in the manual off ASUS's website, which confirms my original suspicion that HDMI and DVI can't be used at the same time. But I'd still like to know if it's possible through software to switch between using the HDMI and DVI.

  Read the article

• Unable to access Windows share

  - by mbnoimi

  I've installed Alfresco 4.2.d under Ubuntu 12.04 LTS; Everything done fine except I can't access it from Windows share although I got the link from Alfresco explorer which is: file:///%5C%5CECSA%5CAlfresco%5CSites%5Cswsdp%5CdocumentLibrary%5CAgency%20Files%5CImages%5Ccoins.JPG I tried to access it from: \\ECSA but I failed too so I made a ping (192.168.0.70 is server IP) then I got: C:\Users\user>ping 192.168.0.70 Pinging 192.168.0.70 with 32 bytes of data: Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Ping statistics for 192.168.0.70: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\Users\user>ping ECSA Ping request could not find host ECSA. Please check the name and try C:\Users\user> Some logs of what's going on: C:\Users\user>net view ECSA System error 1707 has occurred. The network address is invalid. C:\Users\user>nbtstat -a 192.168.0.70 Local Area Connection: Node IpAddress: [192.168.0.84] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- ECSA <20> UNIQUE Registered ECSA <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MAC Address = 00-00-00-00-00-00 C:\Users\user> CIFS Server Configuration in file-servers.properties ### CIFS Server Configuration - file-servers.properties ### cifs.enabled=true cifs.serverName=${localname}A cifs.domain= cifs.broadcast=255.255.255.255 cifs.bindto=192.168.0.70 cifs.ipv6.enabled=false cifs.hostannounce=true cifs.disableNIO=false cifs.disableNativeCode=false cifs.sessionTimeout=900 cifs.maximumVirtualCircuitsPerSession=16 cifs.tcpipSMB.port=445 cifs.netBIOSSMB.sessionPort=139 cifs.netBIOSSMB.namePort=137 cifs.netBIOSSMB.datagramPort=138 cifs.WINS.autoDetectEnabled=true cifs.WINS.primary=192.168.0.70 cifs.WINS.secondary=192.168.0.1 cifs.sessionDebug= cifs.pseudoFiles.enabled=true cifs.pseudoFiles.explorerURL.enabled=true cifs.pseudoFiles.explorerURL.fileName=__Alfresco.url cifs.pseudoFiles.shareURL.enabled=false cifs.pseudoFiles.shareURL.fileName=__Share.url How can I fix this issue?

  Read the article

• Virtualbox HTTP load testing, host CPU overload issues

  - by aschuler

  I'm doing HTTP load testing benchmarks (using Apache Benchmark and Siege) on a small Java EE 1.7.0 / Tomcat 7.0.26 application running on a Debian Squeeze 6.0.4 x64 virtualized with Virtualbox 4.1.8. The computer host is Ubuntu 11.10 x64. I've modified those parameters in the Tomcat server.xml : <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="200000" redirectPort="8443" acceptCount="2000" maxThreads="150" minSpareThreads="50" /> The application executed on the server takes around 300ms. This app is running well until a certain amount of concurrent connections like those one : ab -n 500 -c 150 http://xx.xx.xx.xx:8080/myapp/ ab -n 1000 -c 50 http://xx.xx.xx.xx:8080/myapp/ siege -b -c 100 -r 20 http://xx.xx.xx.xx:8080/myapp/ A lot of socket connection timed out happens and this completly overload the host processor (but the CPU load inside the VM is normal). Doing an htop on the host, i can see that the Virtualbox processus is running under 300% CPU and never come down even after the load test is finished. (I've allocated 4 processors to the VM, if I allocate only one processor, CPU load goes under 100%). Restarting Tomcat don't do anything, i'm forced to restart the whole VM. I've tryed to launch those ab/siege commands locally on the VM and everything goes well. I first thought it was related to a linux network limit as explained here: Running some benchmarks using ab, and tomcat starts to really slow down So I've modified those TCP parameters : echo 15 > /proc/sys/net/ipv4/tcp_fin_timeout echo 30 > /proc/sys/net/ipv4/tcp_keepalive_intvl echo 1 > /proc/sys/net/ipv4/tcp_tw_recycle echo 1 > /proc/sys/net/ipv4/tcp_tw_reuse It seems to be better, but it continues to overload the host CPU and output socket connections time out at a certain amount of concurrent connections. I'm wondering if this is not related to how Virtualbox handles external concurrent connections.

  Read the article

• Tomcat 6 Windows Server 64 Redirect Connector Fails

  - by Rafe

  So is there some problem with running the Tomcat connectors under a 64 bit windows OS? Here's my configuration: Windows Server 2003 64 bit Intel Xeon Tomcat 6.0.26 JVM 1.6.0 (64bit) ISAPI Redirect Connector 1.2.30.0 (64 bit) Calling the IP address of the site with :8080 brings up the tomcat page so I know that's running and the examples all work so its obviously not having a problem with the JVM. Calling the site ip on port 80 however gives me error 324 - looking at the application log on windows shows "Could not load all ISAPI filters for site/service. Therefore startup aborted". The ISAPI filter page under the web site properties shows the status of this filter to be down with a red arrow. The ISAPI filter name is jakarta and there is a corresponding virtual directory set up in the root of the site pointing to the same directory as the filter. The jakarta web service extension is also pointing to the required dll (c:\program files\apache software foundation\jakarta isapi redirector\bin\isapi_redirect.dll). Incidentally, this same problem occurs when trying to use Tomcat 5.5. I've also tried swapping out various redirect versions. It's really odd because I got it to work once with a version of the redirector that came with Plesk but I've since uninstalled everything to do with plesk and even trying to use the plesk-compiled dll doesn't work now. I am pulling my hair out on this, any ideas?

  Read the article

• Migrate installation from one HDD to another?

  - by dougoftheabaci

  I have a server with a 64 GB SSD inside. It runs just fine, but occasionally there's a hiccup that causes it to nearly fill up. When that happens my server starts to lockup and generally misbehave. I'm looking to buy a bigger SSD (either 128 GB or 256 GB) but I'm a bit unsure of how best to make the transition. For a start, I don't have an external monitor. If I need one I'll have to borrow it from work. Most of the time I just SSH into the server from my iMac. The only solution I can think of would be to buy two FW800 2.5" cases, boot from the 64 GB SSD and clone it to the 128 GB SSD. Seem a bit excessive but it might be my best option. I do have more than one SATA port on my server, but they're all currently being use for storage drives. They don't mount by default, so I could unplug them and just have the two SSDs and do the whole thing via SSH. This is another option I'm considering. My main concern with either is how best to make sure everything goes across. I want a carbon copy of the first one onto the second. This is especially important because I have a ZFS volume (my storage) and I'm a bit unfamiliar with how to move everything across. I could just start fresh and reinstall everything on the SSD, but that seems like extra trouble I don't need. So any advice on how best to achieve my goals would be appreciated. Thanks! Server is running Ubuntu Server 12.04. The iMac has 10.8.1.

  Read the article

• 426 Connection closed; transfer aborted.

  - by Jiaoziren

  Hi, I have an IIS FTP set up on Windows 2003 SP2 (S1). Everyday in the early morning, a script on another server (S2) will run and initiate FTP transfer of pulling log files from S1 to S2. The FTP client we're using is built-in FTP.exe in Windows 2000 on S2. Recently we replaced S1 with a new server however we kept the IP address. There are multiple IP addresses on new S1. Ever since the new S1 was in place, the '426 Connection closed; transfer aborted.' errors haven been occuring randomly. The log indicated that the transfer started ok however the file cannot be transferred completely, as per log below: mget access*.log 200 Type set to A. 200 PORT command successful. 150 Opening ASCII mode data connection for access02232010.log(205777167 bytes). 426 Connection closed; transfer aborted. ftp: 20454832 bytes received in 283.95Seconds 72.04Kbytes/sec. The firewall monitor suggested that the connection was setup in passive mode however I've been told that MS FTP.exe doesn't support passive mode. Though I can see the response of 'entering passive mode' from server when typing in 'quote pasv'. My network admin has told me to try the transfer in active mode however I don't know how to open active mode on client side. It's getting really frustrating. Wish someone here has the right knowledge/experience could shed me a light. Cheers.

  Read the article

• OpenVPN via DD-WRT

  - by user140491

  I am using DD-WRT with my Buffalo G300NH. I notice in my log files: Wed Oct 10 01:08:25 2012 us=343000 Cannot open /tmp/openvpn/dh.pem for DH parameters: error:02001003:system library:fopen:No such process: error:2006D080:BIO routines:BIO_new_file:no such file I have looked at other answers regarding this error. I have tried to no avail. 755 are chmod rights to /tmp/openvpn. At this point, I can not connect outside my LAN via OpenVPN. My server config looks like this: #mode server #tls-server push "route 192.168.11.1 255.255.255.0" push "dhcp-option DNS 10.8.0.1" server 10.8.0.0 255.255.255.0 port 1194 proto udp dev tun0 ifconfig 10.8.0.1 10.8.0.2 #secret /tmp/static.key ca /tmp/openvpn/ca.crt cert /tmp/openvpn/cert.pem key /tmp/openvpn/key.pem dh /tmp/openvpn/dh.pem keepalive 10 120 comp-lzo persist-key persist-tun verb 5 management localhost 5001 Can someone, knowledgeable, of this error kindly help? i have been going on several days, trying to sort it out. I like all nighters though!!

  Read the article

• 2 Server FC SAN Configuration

  - by BSte

  I have 2 identical servers: -48GB Ram -8GigE NIC's -2FC NIC's -2x72GB RAID1 Hard Drives -Server 2008R2 Host I also Have a Fibre Channel SAN: -16x146GB RAID10 Hard Drives -2xDual-port FC Controllers (Controller A and B both have ports 1 and 2) -Server 1 has Fiber to Ports A1 and B1 -Server 2 has Fiber to Ports A2 and B2 -I kept the default config with 1 Virtual Disk and 1 Volume -The default mappings show ports A1,A2,B1,B2 on LUN 0 with read-write My goal is: -2xVM's with IIS and Guest Level Failover -2xVM's with SQL 2008 Enterprise using a Single DB and Guest Level Failover -1xVM that is an application server, preferable with Host Failover. From what I read, this will also need AD for clustering to work. -I need at least 1 VM always running for IIS and the SQLDB. This includes hardware failover and application (ie: reboot a VM for Critical updates) I was told I could install the VM's and run them from the SAN, and this is what I've tried: Installed MPIO and HyperV on Server1 and Server 2 Added the SAN as Disk E: on both servers, made it GPT and formatted NTFS Configured HyperV on both server to store use E:\VD and E:\VHD On server1, I was able to install 3 VM's on the SAN and all worked well. On server2, I would start installing the other 2 VM's, but always at some point the VM's would get a corrupt .VHD message (either server). Everything I found about the message typically related to antivirus, so I removed all antivirus on both Host servers (now only running 2008R2). I reformatted drive E: (SAN), recreated the VHD and VD directories, installed 3 VM's on Server 1, and then had the same issue when installing VM's on Server2. Obviously something is wrong, but I'm not certain what exactly. My questions: 1) Are my goals possible with this hardware setup? -I've read 2008R2 supports FC SAN's, but a lot of articles seem to only give examples with iSCSCI setups 2) What would be the suggested route on setting up the SAN (disks,volumes,LUN's)? I've worked with HyperV on a single machine before and never had issues. Actual experience working on SAN's and clustering is new to me. Any suggestions or recommendations to get me in the right direction would be much appreciated.

  Read the article

• nginx + wordpress in /wordpress subdir

  - by nkr1pt

  I installed nginx and would like to setup wordpress as a final step. I followed many howtos but am unable to get it working. The setup is fairly straightforward, the root dir of the webserver is /data/Sites/nkr1pt.homelinux.net. In that root dir I created a symlink to the wordpress folder in /usr/local/wordpress, so in fact all wordpress files can be accessed at /data/Sites/nkr1pt.homelinux.net/wordpress. Permissions are ok. The plan is to get wordpress working at http://sirius/wordpress, the server's name is sirius. spawn-fcgi is running and listening on port 7777. Here you can see the relevant config: server { listen 80; listen 8080; server_name sirius; root /data/Sites/nkr1pt.homelinux.net; passenger_enabled on; passenger_base_uri /redmine; #charset koi8-r; #access_log logs/access.log main; location ^~ /data { root /data/Sites/nkr1pt.homelinux.net; autoindex on; auth_basic "Restricted"; auth_basic_user_file htpasswd; } location ^~ /dump { root /data/Sites/nkr1pt.homelinux.net; autoindex on; } location ^~ /wordpress { try_files $uri $uri/ /wordpress/index.php; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:7777 location ~ \.php$ { #fastcgi_split_path_info ^(/wordpress)(/.*)$; fastcgi_pass localhost:7777; #fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; #index index.php; } please note that redmine, and the locations dump and data are working perfectly, it is only wordpress that I cannot get to work. Can you please help me to the correct wordpress configuration in nginx? All help is much appreciated!

  Read the article

• Chef: nested data bag data to template file returns "can't convert String into Integer"

  - by Dalho Park

  I'm creating simple test recipe with a template and data bag. What I'm trying to do is creating a config file from data bag that has simple nested information, but I receive error "can't convert String into Integer" Here are my setting file 1) recipe/default.rb data1 = data_bag_item( 'mytest', 'qa' )['test'] data2 = data_bag_item( 'mytest', 'qa' ) template "/opt/env/test.cfg" do source "test.erb" action :create_if_missing mode 0664 owner "root" group "root" variables({ :pepe1 = data1['part.name'], :pepe2 = data2['transport.tcp.ip2'] }) end 2)my data bag named "mytest" $knife data bag show mytest qa id: qa test: part.name: L12 transport.tcp.ip: 111.111.111.111 transport.tcp.port: 9199 transport.tcp.ip2: 222.222.222.222 3)template file test.erb part.name=<%= @pepe1 % transport.tcp.binding=<%= @pepe2 % Error reurns when I run chef-client on my server, [2013-06-24T19:50:38+00:00] DEBUG: filtered backtrace of compile error: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in []',/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:inblock in from_file',/var/chef/cache/cookbooks/config_test/recipes/default.rb:12:in from_file' [2013-06-24T19:50:38+00:00] DEBUG: filtered backtrace of compile error: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in[]',/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in block in from_file',/var/chef/cache/cookbooks/config_test/recipes/default.rb:12:infrom_file' [2013-06-24T19:50:38+00:00] DEBUG: backtrace entry for compile error: '/var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in `[]'' [2013-06-24T19:50:38+00:00] DEBUG: Line number of compile error: '19' Recipe Compile Error in /var/chef/cache/cookbooks/config_test/recipes/default.rb TypeError can't convert String into Integer Cookbook Trace: /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:in []' /var/chef/cache/cookbooks/config_test/recipes/default.rb:19:inblock in from_file' /var/chef/cache/cookbooks/config_test/recipes/default.rb:12:in `from_file' Relevant File Content: /var/chef/cache/cookbooks/config_test/recipes/default.rb: 12: template "/opt/env/test.cfg" do 13: source "test.erb" 14: action :create_if_missing 15: mode 0664 16: owner "root" 17: group "root" 18: variables({ 19 :pepe1 = data1['part.name'], 20: :pepe2 = data2['transport.tcp.ip2'] 21: }) 22: end 23: I tried many things and if I comment out "pepe1 = data1['part.name'],", then :pepe2 = data2['transport.tcp.ip2'] works fine. only nested data "part.name" cannot be set to @pepe1. Does anyone knows why I receive the errors? thanks,

  Read the article

• Looking for cheap Wireless router, with USB for attached USB disk drive

  - by geoffc

  I have a 802.11b router at home (DLink DI-614+ (B rev)) and it is working perfectly well for me. I want to replace it though, since it is out of updates, and now several years old and heck, I want a new toy to configure! I was trying to decide what to get. I could care less about 802.11g or n support, since B is fast enough, but every device in my house is now B/G, so G would be fine for me. N buys me little to nothing. (Small enough house that range is a non-issue). The features I realized I want are a USB port for sharing a USB hard drive. I would like to have a central device I could store files on. I do not want to waste the power of an always running PC to do this, so a router seems like the place to go. I would love it, if it could support Vonage VOIP as well, then I could ditch a power brick from a second device (I have the small DLink Vonage VOIP box). All the current examples of this router (with USB drive, yet to find one with VOIP too!) are in the $100+ range, and N and silly, when a B/G is in the $30 range around here.

  Read the article

• Automatically check for Security Updates on CentOS or Scientific Linux?

  - by Stefan Lasiewski

  We have machines running RedHat-based distros such as CentOS or Scientific Linux. We want the systems to automatically notify us if there are any known vulnerabilities to the installed packages. FreeBSD does this with the ports-mgmt/portaudit port. RedHat provides yum-plugin-security, which can check for vulnerabilities by their Bugzilla ID, CVE ID or advisory ID. In addition, Fedora recently started to support yum-plugin-security. I believe this was added in Fedora 16. Scientific Linux 6 did not support yum-plugin-security as of late 2011. It does ship with /etc/cron.daily/yum-autoupdate, which updates RPMs daily. I don't think this handles Security Updates only, however. CentOS does not support yum-plugin-security. I monitor the CentOS and Scientific Linux mailinglists for updates, but this is tedious and I want something which can be automated. For those of us who maintain CentOS and SL systems, are there any tools which can: Automatically (Progamatically, via cron) inform us if there are known vulnerabilities with my current RPMs. Optionally, automatically install the minimum upgrade required to address a security vulnerability, which would probably be yum update-minimal --security on the commandline? I have considered using yum-plugin-changelog to print out the changelog for each package, and then parse the output for certain strings. Are there any tools which do this already?

  Read the article

• How can I filter /var/adm/wtmpx on Solaris 10?

  - by Yanick Girouard

  Some of our Solaris 10 servers are monitored using SiteScope, which uses Telnet to probe certain ports (SSH is one of them) every few minutes. This is creating an insane amount of lines in /var/adm/wtmpx, and eventually make it so big (2,5G+) that we can no longer run the last command, or that the uptime command is unable to accurately show the true uptime of the server. The error we get when trying to run the last command is this: /var/adm/wtmpx: Value too large for defined data type I have found ways we can clean this accounting log using a cron job (with the command /usr/lib/acct/fwtmp), and this works. This is not the issue. I was wondering if there would be a way to simply prevent connections from the monitoring user (in our case, user monsite) from creating entries in this accounting log at all. Is this possible, and if so, how can I do it? I've looked around and searched Google for a while, but couldn't find an answer to this question. NOTE: We are very well aware that the monitoring solution we employ is perhaps not the best one, but we cannot change it at this time. Therefore, suggesting that we change it is not pertinent to this question. If you want to read more on the Sitescope monitoring solution we employ for those servers, please see its documentation here and look for Port Monitor, and Connecting to remote UNIX servers, which explains how it works.

  Read the article

• Add Network Printer drivers in Windows 7/Server 2008 R2?

  - by Matias Nino

  I'm running a 64 bit Windows 7 / Windows 2008 R2 workstation that I just installed. I need to add a printer that is shared on the network from a 32bit Windows 2000 print server. This is an HP LaserJet 5Si printer, the drivers for which HP tells me are automatically built into Windows 7/R2. However, whenever I connect to the printer or try to add it, I get the following screen: Upon clicking OK, I get this screen asking me to locate the driver: How can I possibly locate a driver that is SUPPOSED TO BE NATIVELY SUPPORTED on Windows 7/R2? The tough part is that this printer is one of many shared on a server and does not have a direct IP address. Even worse: I have no access to the print server so I cannot put the 64 bit drivers on there. Any ideas? UPDATE: HP doesn't make a Vista driver either. It claims it is natively supported by Vista and 7, which is true because I am able to create a local printer on a fake tcp/ip port and Windows lets me pick the proper driver. However, when adding from the network, Windows does not let me select a driver and demands an INF. I tried searching the entire sub-structure of the C:\Windows directory and could not find any INF files that contain HP information. The INF might be located somewhere in the Windows installation DVD, but all the files on the DVD are compressed and unrecognizable. UPDATE #2 I installed the proper printer driver as a local printer (with no printer attached) and it installed. However, this did not change the fact that it STILL asks me to provide drivers when connecting to the networked printer.

  Read the article

• Installinf Xen 4.0.1 in Ubuntu 10.10

  - by Hiranth

  make -f buildconfigs/mk.linux-2.6-pvops build make[3]: Entering directory /home/hirantha/xen-4.0.1' set -ex; \ if ! [ -d linux-2.6-pvops.git ]; then \ rm -rf linux-2.6-pvops.git linux-2.6-pvops.git.tmp; \ mkdir linux-2.6-pvops.git.tmp; rmdir linux-2.6-pvops.git.tmp; \ git clone -o xen -n git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git linux-2.6-pvops.git.tmp; \ (cd linux-2.6-pvops.git.tmp; git checkout -b xen/stable-2.6.32.x xen/xen/stable-2.6.32.x ); \ mv linux-2.6-pvops.git.tmp linux-2.6-pvops.git; \ fi + '[' -d linux-2.6-pvops.git ']' + rm -rf linux-2.6-pvops.git linux-2.6-pvops.git.tmp + mkdir linux-2.6-pvops.git.tmp + rmdir linux-2.6-pvops.git.tmp + git clone -o xen -n git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git linux-2.6-pvops.git.tmp Initialized empty Git repository in /home/hirantha/xen-4.0.1/linux-2.6-pvops.git.tmp/.git/ fatal: Unable to look up git.kernel.org (port 9418) (Name or service not known) make[3]: *** [linux-2.6-pvops.git/.valid-src] Error 128 make[3]: Leaving directory/home/hirantha/xen-4.0.1' make[2]: * [linux-2.6-pvops-install] Error 2 make[2]: Leaving directory /home/hirantha/xen-4.0.1' make[1]: *** [install-kernels] Error 1 make[1]: Leaving directory/home/hirantha/xen-4.0.1' make: * [world] Error 2 hirantha@hirantha-desktop:~/xen-4.0.1$ ^C hirantha@hirantha-desktop:~/xen-4.0. What is this error? How can i solve this?

  Read the article

• SSH hangs without password prompt

  - by Wilco

  Just reinstalled OS X and for some reason I now cannot connect to a specific machine on my local network via SSH. I can SSH to other machines on the network without any problems, and other machines can SSH to the problematic one as well. I'm not sure where to start looking for problems - can anyone point me in the right direction? Here's a dump of a connection attempt: OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to 10.0.1.7 [10.0.1.7] port 22. debug1: Connection established. debug1: identity file /Users/nwilliams/.ssh/identity type -1 debug1: identity file /Users/nwilliams/.ssh/id_rsa type -1 debug1: identity file /Users/nwilliams/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.5 debug1: match: OpenSSH_4.5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '10.0.1.7' is known and matches the RSA host key. debug1: Found key in /Users/nwilliams/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password,keyboard-interactive debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic ... at this point it hangs for quite a while, and then resumes ... debug1: Unspecified GSS failure. Minor code may provide more information Server not found in Kerberos database debug1: Unspecified GSS failure. Minor code may provide more information Server not found in Kerberos database debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Trying private key: /Users/nwilliams/.ssh/identity debug1: Trying private key: /Users/nwilliams/.ssh/id_rsa debug1: Trying private key: /Users/nwilliams/.ssh/id_dsa debug1: Next authentication method: keyboard-interactive

  Read the article

• Vista ICS issue

  - by Bill Grey

  I have a strange problem with Internet Connection Sharing on a laptop running Vista Business. This laptop is connected to the internet via the ethernet port, which goes to an ADSL modem. it is automatically assigned the IP address 192.168.1.50, and the modem/gateway is 192.168.1.1 My friends laptop is running Vista Home. Previously, I would create an ad hoc wireless network, enable ICS, and everything would be perfect. My friend would have internet access via this. However, something has now mysteriously broken. If I enable ICS on the wireless connection, it resets my Local Area Connection, assigning it the manual IP address of 192.168.0.1, which means my connection to the internet is destroyed. Both wireless adapters on each network are assigned auto configuration addresses, in the 168. range. They can see each other fine, but my friends laptop cannot access the internet via mine, even after I have restored the Local Area Connection settings. I understand the computer with ICS enabled must have the IP of 192.168.0.1, but previously, before whatever went wrong, my wireless adapter would be 192.168.0.1 and my friends computer would get an IP via DHCP. I have also tried setting static IP address and making a bridge, none of which works. How can I fix this problem, and prevent enabling ICS from touching my Local Area Connection? Both machines have no firewall, have appropriate settings etc...

  Read the article

• How to write files in specific order?

  - by Bernie

  Okay, here's a weird problem -- My wife just bought a 2014 Nissan Altima. So, I took her iTunes library and converted the .m4a files to .mp3, since the car audio system only supports .mp3 and .wma. So far so good. Then I copied the files to a DOS FAT-32 formatted USB thumb drive, and connected the drive to the car's USB port, only to find all of the tracks were out of sequence. All tracks begin with a two digit numeric prefix, i.e., 01, 02, 03, etc. So you would think they would be in order. So I called Nissan Connect support and the rep told me that there is a known problem with reading files in the correct order. He said the files are read in the same order they are written. So, I manually copied a few albums with the tracks in a predetermined order, and sure enough he was correct. So I copied about 6 albums for testing, then changed to the top level directory and did a "find . music.txt". Then I passed this file to rsync like this: rsync -av --files-from=music.txt . ../Marys\ Music\ Sequenced/ The files looked like they were copied in order, but when I listed the files in order of modified time, they were in the same sequence as the original files: ../Marys Music Sequenced/Air Supply/Air Supply Greatest Hits ls -1rt 01 Lost In Love.mp3 04 Every Woman In The World.mp3 03 Chances.mp3 02 All Out Of Love.mp3 06 Here I Am (Just When I Thought I Was Over You).mp3 05 The One That You Love.mp3 08 I Want To Give It All.mp3 07 Sweet Dreams.mp3 11 Young Love.mp3 So the question is, how can I copy files listed in a file named music.txt, and copy them to a destination, and ensure the modification times are in the same sequence as the files are listed?

  Read the article

• Firebird 2.5 Database Corrupt

  - by BrendanH

  We have an issue where a database hangs the server when: a backup is performed (Hangs on a specific table) selecting * or count(1) from a specific table or viewing data that is related to the table (FKs, etc) We could browse the table to a certain point (using IBExpert) however after about 2900 records the machine just spikes and hangs. Performing a gfix -m does not work, and the validation reports back Record level errors = 4 (no matter how many times we run gfix -m, -v, etc. The Firebird.log file reports back these types of messages: Relation has 91631 orphan backversions (9214273 in use) in table BINS (137) - {Which is apparently just a warning} Unable to complete network request to host "MHPLZA1". Error reading data from the connection. INET/inet_error: read errno = 10054 SERVER/process_packet: broken port, server exiting Shutting down the server with 1 active connection(s) to 1 database(s), 0 active service(s) - {If we leave the backup to run while hanging, it eventually logs this error message} The setup is: The table is question has about 7000 records. The Firebird version is 2.5 Classic Server x64 install. The OS is Windows Server 2008. This is a virtual machine (VMWare) running on a massive server. (Does anyone have issues with VMs and Firebird?). We have the same setup running fine on other servers (However they are not virtual machines). Is there anyway to pin point the issue and or the cause?

  Read the article

• How to configure Farsun USB barcode scanner to not auto-trigger

  - by David Grayson

  At my company we have several USB barcode scanners. I'm not sure exactly what model they are, but I think they are the FG9800 from Farsun because that's what they look like on the exterior. They came with a programming manual that is very similar to this document from the Farsun website. When I scan the "Output Firmware Version" barcode, my scanner types the following into the computer: Farsun V2.00 2011-01-01 Is it possible to configure these scanners so they only read barcodes in response to the trigger button being pressed? I don't want them to automatically read barcodes. Additionally, I want this setting to be remembered while the scanner is turned off. Since this scanner only has a USB port, the only way to configure it that I know of is to scan bar codes from the manual (or make your own). I have tried scanning the configuration bar codes for Single Scan (013300), Single Scan No Trigger (013301), and Laser/CCD Timeout - 5 Seconds (0134005) from this document. Sometimes (but not often) this puts the scanner in to the right mode, where it only scans when the button is pressed. Unfortunately, the scanner seems to always leave this mode when it is power cycled. I have also scanned the "Reset Configuration To Defaults" barcode (0B) many times. We have three different scanners like this and I have not been able to successfully configure any of them. If the things I want are not possible with these Farsun-based scanners, is there some other scanner we can use?

  Read the article

• Virtualbox Headless Server on Ubuntu missing VRDP Options

  - by The Daemons Advocate

  I'm running VirtualBox headless server on an Ubuntu 64 bit host, and I want to use it remotely. However, I'm having problems connecting via RDP. The DNS names in my network show the host to be 'server', and the guest to be 'ubuntu-vm'. From the official documentation, I gather that I am to connect to server on the default RDP port in order to see the guest machine. I start the virtual machine like so: vboxheadless -startvm My_VM Then I connect on my laptop, and I get... rdesktop -a 16 server ERROR: server: unable to connect So next I consult the documentation further, and I find there are RDP flags that can be turned on (but should be on implicitly for a headless server). So I pull up information using 'vboxmanage showvminfo My_VM', and I find the VRDP property is off. VRDP Connection: not active To make things even weirder, RDP flag seems to be missing from vboxmanage. I've installed straight from the ubuntu repo's using the virutalbox-ose package, not sure how that measures up against the official docs. For instance, this command doesn't exist: VBoxManage modifyvm My_VM --vrdp on From the UI, the VM's Settings regarding Display have greyed out the 'remote Display' option. What I'm looking for is advice :). I'm open to suggestions that don't involve starting again with something like VMWare. Thanks in advance!

  Read the article

• award phoenix bios not recognizing my sata hdd.

  - by josh

  What am I doing wrong? I have a custom built comp with a Fatal1ty AA8XE mobo. It has 4 SATA ports and one IDE port. When i first got it, I had a really hard time putting in more than one hard drive. Right now i have one 120gb IDE HDD on master and my DVD+-RW on slave connected to the one IDE spot on the mobo. I ripped a bunch of movies and filled up my HDD, so I got a WD 80gb SATA drive. I plugged it into SATA1 and hooked up the power, turned on comp, went into bios. The only thing in any option in any of the menues in this crazy lookin bios is a thing that says "SATA mode". i put it on IDE, set it so PATA is primary, SATA is secondary. booted up my comp, nothin. Not recognizing the SATA. I went back into the bios and checked it all again. I saw that it says SATA2 and SATA4 are the secondaries so i put it on SATA2, booted, nothing, same with SATA4, same with SATA3, all same as SATA1. Bios and wt os are not recognizing the drive as being there at all. I even downloaded and printed the almost 100 page manual for the mobo, read the entire thing, and still can't figure it out. I know there are a lot of people out there smarter than me when it comes to computers. So please, somebody, anybody, please tell me something that I'm not seeing. Some setting somewhere that I didn't configure right. There is something, obviously, but I can't find it. As far as i can tell, everything is set perfectly fine for my 120gb to be the master and the SATA to be the slave. I don't know what I'm doing wrong but I'm seriously about to throw this computer out the window. thankyou in advance to whoever attempts to help.

  Read the article

• Using Virtualbox Bridge Networking fails connection from Guest OS to Oracle XE running on Host

  - by Licheng

  I am trying to make a JDBC connection from a VirtualBox Ubuntu Guest OS to an Oracle XE database running o Host. However, the connection is refused. Here are the details of my environment: VirtualBox: 4.1.4 Host OS: Windows 7 Guest OS: Ubuntu server 11.4 Networking mode: Bridged network Oracle XE database running on Host Issue: WebLogic server runs on the Ubuntu virtualbox. It attempts to connect to an Oracle XE database running on the Host OS (windows 7) with listening port 1521. On the Guest OS (Ubuntu), I am able to ping the Host computer from the Guest OS. However, when I configured a JDBC data source on the WebLogic server on the Guest OS to connect to the Oracle XE, connection took a long time, and eventually I received an "IO Exception: The Network Adapter could not establish the connection". When I tried "telnet host-ip 1521", no connection was established. With Bridge networking, I can make bi-directional connections between the host and the guest OS (e.g. connection through ssh and ftp). Is there anything I missed in the setup of Bridge networking and the guest/host OS? Note that I was able to make the same connection within a normal networking environment (i.e. not using virtual box). I am not sure whether Bridge networking is a good option for the work described above. Should I use host-only networking mode? If so, any specific configurations I need to perform? I read through the Virtual box document on setting up the host-only network, however, it lacks of details. I followed the procedures described in the manual, and couldn't even connect to the host. Could some experts here enlighten me on this issue? Much appreciated. Licheng

  Read the article

• How to avoid intrusion detection/anti spoofing issue on a sonicwall TZ series FW

  - by Ian

  We have a sonicwall tz series FW with two internet service providers connected. One of the providers has a wireless service which works a bit like an ethernet switch in that we have an ip with a /24 subnet and the gateway is .1. All other clients on the same subnet (say 195.222.99.0) have the same .1 gateway - this is important, read on. Some of our clients are also on the same subnet. Our config: X0 : Lan X1 : 89.90.91.92 X2 : 195.222.99.252/24 (GW 195.222.99.1) X1 and X2 are not connected, other than both being connected to the public Internet. Client config: X1 : 195.222.99.123/24 (GW 195.222.99.1) What fails, what works: Traffic 195.222.99.123 (client) <- 89.90.91.92 (X1) : Spoof alert Traffic 195.222.99.123 (client) <- 195.222.99.252 (X1) : OK - no spoof alert I have several clients with IPs in the 195.222.99.0 range and all provoke identical alerts. This is the alert I see on the FW: Alert Intrusion Prevention IP spoof dropped 195.222.99.252, 21475, X1 89.90.91.92, 80, X1 MAC address: 00:12:ef:41:75:88 Anti-spoofing is switched off on my FW (network-mac-ip-anti-spoofing - config for each interface) for all ports I can provoke the alerts by telneting to a port on X1 from the clients. You can't argue with the logic - this is suspicious traffic. X1 is receiving traffic with a source IP which corresponds to X2s subnet. Anyone know how can I tell the FW that packets with a src subnet of 195.222.99.0 can legitimately appear on X1? I know whats going wrong, I've seen the same thing before, but with higher end FWs you can avoid this with a few extra rules. I can't see how to do this here. And before you ask why we're using this service provider - they give us 3ms (yep 3ms, thats not an error) delay between routers.

  Read the article

• ISA Server 2006 SSL Certificate Dilemma

  - by JohnyD

  I'm making so great headway in offering our services over https with help from a Go Daddy certificate, later to be upgraded to Thawte SSL123 certs. But, I've just run into one whopper of a problem. Here's my setup: I run an ISA 2006 firewall. Our web services are distributed over 2 servers. One is Windows 2000 (www.domain.com) and the other is Windows 2003 (services.domain.com). So, I'll need to purchase 2 certs for both www and services, import them into IIS6 on their respective machines, then export them with the primary key (making sure to Include all certificates in the certification path if possible... that had me stumped for a while), and then to finally import them into ISA's local computer Personal store. The problem I've just run into is that I have separate firewall rules for services.domain.com and www.domain.com... because requests need to be forwarded to different web servers. Each of these firewall rules use the same httplistener. I have just found out that you can only use 1 certificate per httplistener. To make matters worse you can only have a single httplistener per ip / port. Is this correct? I can only use a single certificate for a single ip address? This would seem to be a severe limitation. Am I wrong? If I'm not then I've got a whole lot more work ahead of me as I'll have to set up extra ip's, add them to the firewall's network interface, create new listeners using that ip, etc... Can someone please confirm that I'm doing this correctly / incorrectly? Once I got my head wrapped around it all it seemed easy... then this. Thanks in advance.

  Read the article

< Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >