Search Results

Search found 16783 results on 672 pages for 'static typing'.

Page 362/672 | < Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >

  • The theory of evolution applied to software

    - by Michel Grootjans
    I recently realized the many parallels you can draw between the theory of evolution and evolving software. Evolution is not the proverbial million monkeys typing on a million typewriters, where one of them comes up with the complete works of Shakespeare. We would have noticed by now, since the proverbial monkeys are now blogging on the Internet ;-) One of the main ideas of the theory of evolution is the balance between random mutations and natural selection. Random mutations happen all the time: millions of mutations over millions of years. Most of them are totally useless. Some of them are beneficial to the evolved species. Natural selection favors the beneficially mutated species. Less beneficial mutations die off. The mutated rabbit doesn't have to be faster than the fox. It just has to be faster than the other rabbits.   Theory of evolution Evolving software Random mutations happen all the time. Most of these mutations are so bad, the new species dies off, or cannot reproduce. Developers write new code all the time. New ideas come up during the act of writing software. The really bad ones don't get past the stage of idea. The bad ones don't get committed to source control. Natural selection favors the beneficial mutated species Good ideas and new code gets discussed in group during informal peer review. Less than good code gets refactored. Enhanced code makes it more readable, maintainable... A good set of traits makes the species superior to others. It becomes widespread A good design tends to make it easier to add new features, easier to understand the current implementations, easier to optimize for performance...thus superior. The best designs get carried over from project to project. They appear in blogs, articles and books about principles, patterns and practices.   Of course the act of writing software is deliberate. This can hardly be called random mutations. Though it sometimes might seem that code evolves through a will of its own ;-) Does this mean that evolving software (evolution) is better than a big design up front (creationism)? Not necessarily. It's a false idea to think that a project starts from scratch and everything evolves from there. Everyone carries his experience of what works and what doesn't. Up front design is necessary, but is best kept simple and minimal, just enough to get you started. Let the good experiences and ideas help to drive the process, whether they come from you or from others, from past experience or from the most junior developer on your team. Once again, balance is the keyword. Balance design up front with evolution on a daily basis. How do you know what balance is right? Through your own experience of what worked and what didn't (here's evolution again). Notes: The evolution of software can quickly degenerate without discipline. TDD is a discipline that leaves little to chance on that part. Write your test to describe the new behavior. Write just enough code to make it behave as specified. Refactor to evolve the code to a higher standard. The responsibility of good design rests continuously on each developers' shoulders. Promiscuous pair programming helps quickly spreading the design to the whole team.

    Read the article

  • How to Make the Gnome Panels in Ubuntu Totally Transparent

    - by The Geek
    We all love transparency, since it makes your desktop so beautiful and lovely—so today we’re going to show you how to apply transparency to the panels in your Ubuntu Gnome setup. It’s an easy process, and here’s how to do it. This article is the first part of a multi-part series on how to customize the Ubuntu desktop, written by How-To Geek reader and ubergeek, Omar Hafiz. Making the Gnome Panels Transparent Of course we all love transparency, It makes your desktop so beautiful and lovely. So you go for enabling transparency in your panels , you right click on your panel, choose properties, go to the Background tab and make your panel transparent. Easy right? But instead of getting a lovely transparent panel, you often get a cluttered, ugly panel like this: Fortunately it can be easily fixed, all we need to do is to edit the theme files. If your theme is one of those themes that came with Ubuntu like Ambiance then you’ll have to copy it from /usr/share/themes to your own .themes directory in your Home Folder. You can do so by typing the following command in the terminal cp /usr/share/themes/theme_name ~/.themes Note: don’t forget to substitute theme_name with the theme name you want to fix. But if your theme is one you downloaded then it is already in your .themes folder. Now open your file manager and navigate to your home folder then do to .themes folder. If you can’t see it then you probably have disabled the “View hidden files” option. Press Ctrl+H to enable it. Now in .themes you’ll find your previously copied theme folder there, enter it then go to gtk-2.0 folder. There you may find a file named “panel.rc”, which is a configuration file that tells your panel how it should look like. If you find it there then rename it to “panel.rc.bak”. If you don’t find don’t panic! There’s nothing wrong with your system, it’s just that your theme decided to put the panel configurations in the “gtkrc” file. Open this file with your favorite text editor and at the end of the file there is line that looks like this “include “apps/gnome-panel.rc””. Comment out this line by putting a hash mark # in front of it. Now it should look like this “# include “apps/gnome-panel.rc”” Save and exit the text editor. Now change your theme to any other one then switch back to the one you edited. Now your panel should look like this: Stay tuned for the second part in the series, where we’ll cover how to change the color and fonts on your panels. Latest Features How-To Geek ETC How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The Legend of Zelda – 1980s High School Style [Video] Suspended Sentence is a Free Cross-Platform Point and Click Game Build a Batman-Style Hidden Bust Switch Make Your Clock Creates a Custom Clock for your Android Homescreen Download the Anime Angels Theme for Windows 7 CyanogenMod Updates; Rolls out Android 2.3 to the Less Fortunate

    Read the article

  • Eclipse Indigo very slow on Kubuntu 12.04

    - by herom
    hello fellow ubuntu users! I have a really big problem with my Eclipse Indigo running on Kubuntu 12.04 32bit, Dell Vostro 3500, Intel(R) Core(TM) i5 CPU M480 @ 2.67 (as cat /proc/cpuinfo said). It has 4GB RAM. cat /proc/cpuinfo brings up the following: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 37 model name : Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz stepping : 5 microcode : 0x2 cpu MHz : 1197.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm ida arat dts tpr_shadow vnmi flexpriority ept vpid bogomips : 5319.85 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 37 model name : Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz stepping : 5 microcode : 0x2 cpu MHz : 1197.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 2 apicid : 4 initial apicid : 4 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm ida arat dts tpr_shadow vnmi flexpriority ept vpid bogomips : 5319.88 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 2 vendor_id : GenuineIntel cpu family : 6 model : 37 model name : Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz stepping : 5 microcode : 0x2 cpu MHz : 1197.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm ida arat dts tpr_shadow vnmi flexpriority ept vpid bogomips : 5319.88 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 3 vendor_id : GenuineIntel cpu family : 6 model : 37 model name : Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz stepping : 5 microcode : 0x2 cpu MHz : 1197.000 cache size : 3072 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 2 apicid : 5 initial apicid : 5 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 11 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx rdtscp lm constant_tsc arch_perfmon pebs bts xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm ida arat dts tpr_shadow vnmi flexpriority ept vpid bogomips : 5319.88 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: java -version brings the following: java version "1.7.0_04" Java(TM) SE Runtime Environment (build 1.7.0_04-b20) Java HotSpot(TM) Server VM (build 23.0-b21, mixed mode) it's the Oracle Java, not OpenJDK. I try to develop an Android application for GoogleTV and Eclipse is this slow, that it can't follow my typing (extreme lagging!!), but this issue makes it almost impossible! here is my eclipse.ini file: -startup plugins/org.eclipse.equinox.launcher_1.2.0.v20110502.jar --launcher.library plugins/org.eclipse.equinox.launcher.gtk.linux.x86_1.1.100.v20110505 -product org.eclipse.epp.package.java.product --launcher.defaultAction openFile -showsplash org.eclipse.platform --launcher.XXMaxPermSize 512m --launcher.defaultAction openFile -vmargs -Dosgi.requiredJavaVersion=1.5 -Declipse.p2.unsignedPolicy=allow -Xms256m -Xmx512m -Xss4m -XX:PermSize=128m -XX:MaxPermSize=384m -XX:CompileThreshold=5 -XX:MaxGCPauseMillis=10 -XX:MaxHeapFreeRatio=70 -XX:+CMSIncrementalPacing -XX:+UnlockExperimentalVMOptions -XX:+UseG1GC -XX:+UseFastAccessorMethods -XX:ReservedCodeCacheSize=64m -Dcom.sun.management.jmxremote has anybody faced the same problems? can anybody help me on this problem? it's really urgent as I'm sitting here at my company and am not able to do anything productive...

    Read the article

  • How can I fix my keyboard layout?

    - by Scott Severance
    For a long time, I've had my keyboard configured to use the layout currently known as "English (international AltGr dead keys)." I like this layout because without any modifier keys, it's identical to the US English keyboard, but when I hold Right Alt I can get accented letters and other characters not available on a standard US English keyboard. In Oneiric, however, the layout is messed up. Right Alt+N produces "ñ" as expected. And another method works: Right Alt+`, E produces "è", also as expected. But there's no way to type "é", which is probably the accented letter I type the most. I expect Right Alt+A, E to do the trick. But instead of a dead key for the acute accent, it uses a method for combining characters to create the hybrid "´e". This hybrid looks like the proper "é" in some settings, but it isn't the same character and doesn't always work. (For example, in the text input box as I type this, it looks the same as the proper character, but when displayed on the site for all so see, it looks very wrong--at least on my machine.) Ditto for all other characters with an acute accent, though some are available directly as pre-composed characters: For example, Right Alt+I yields "í". How can I change the acute accent on the A key to a proper dead key? Perhaps the more general version of this is: How can I tweak my keyboard layout? Update I just tested this on my other machine, also running Oneiric, but upgraded from previous versions. I have no problems with the second machine. The problem machine was a fresh install of Oneiric, but I kept my old $HOME when I did the fresh install. Clarification Even if an answer doesn't address my specific examples, I would still accept it if it provided enough detail for me to find the layout and tweak it according to my needs. Major Update After working through the information gained through Jim C's and Chascon's helpful replies, I've learned something new: The problem isn't with the layout itself, but with the fact that the selected layout isn't being applied. When I look at the definition in /usr/share/X11/xkb/symbols/us of the layout I've been running for a long time, I found that the definition doesn't match what I get when I type. In addition, the keyboard layout dialog that's supposed to show the current layout looks different from the way the layout is defined in the file I mentioned, and matches what actually happens when I type. Following Jim C's suggestion, I created a new layout in /usr/share/X11/xkb/symbols/us containing some modifications to the layout I want. I can select my layout from the keyboard properties, and I can use in on the console following Chascon's post, but the layout I get when typing is unchanged. Apparently, there's a different layout defined somewhere that's overriding what I've set. Where is that layout hiding? This problem occurs in Unity (3D and 2D), but I was able to get the correct layout set in Xfce. In case it's relevant, this problem has occurred since I installed Oneiric fresh on this machine (though I preserved my $HOME). I don't recall whether this problem occurred before the reinstall. Also, in case it's relevant, I also run iBus so I can type Korean. I have a few difficulties with iBus, but I doubt they're related.

    Read the article

  • Deliberate Practice

    - by Jeff Foster
    It’s easy to assume, as software engineers, that there is little need to “practice” writing code. After all, we write code all day long! Just by writing a little each day, we’re constantly learning and getting better, right? Unfortunately, that’s just not true. Of course, developers do improve with experience. Each time we encounter a problem we’re more likely to avoid it next time. If we’re in a team that deploys software early and often, we hone and improve the deployment process each time we practice it. However, not all practice makes perfect. To develop true expertise requires a particular type of practice, deliberate practice, the only goal of which is to make us better programmers. Everyday software development has other constraints and goals, not least the pressure to deliver. We rarely get the chance in the course of a “sprint” to experiment with potential solutions that are outside our current comfort zone. However, if we believe that software is a craft then it’s our duty to strive continuously to raise the standard of software development. This requires specific and sustained efforts to get better at something we currently can’t do well (from Harvard Business Review July/August 2007). One interesting way to introduce deliberate practice, in a sustainable way, is the code kata. The term kata derives from martial arts and refers to a set of movements practiced either solo or in pairs. One of the better-known examples is the Bowling Game kata by Bob Martin, the goal of which is simply to write some code to do the scoring for 10-pin bowling. It sounds too easy, right? What could we possibly learn from such a simple example? Trust me, though, that it’s not as simple as five minutes of typing and a solution. Of course, we can reach a solution in a short time, but the important thing about code katas is that we explore each technique fully and in a controlled way. We tackle the same problem multiple times, using different techniques and making different decisions, understanding the ramifications of each one, and exploring edge cases. The short feedback loop optimizes opportunities to learn. Another good example is Conway’s Game of Life. It’s a simple problem to solve, but try solving it in a functional style. If you’re used to mutability, solving the problem without mutating state will push you outside of your comfort zone. Similarly, if you try to solve it with the focus of “tell-don’t-ask“, how will the responsibilities of each object change? As software engineers, we don’t get enough opportunities to explore new ideas. In the middle of a development cycle, we can’t suddenly start experimenting on the team’s code base. Code katas offer an opportunity to explore new techniques in a safe environment. If you’re still skeptical, my challenge to you is simply to try it out. Convince a willing colleague to pair with you and work through a kata or two. It only takes an hour and I’m willing to bet you learn a few new things each time. The next step is to make it a sustainable team practice. Start with an hour every Friday afternoon (after all who wants to commit code to production just before they leave for the weekend?) for month and see how that works out. Finally, consider signing up for the Global Day of Code Retreat. It’s like a daylong code kata, it’s on December 8th and there’s probably an event in your area!

    Read the article

  • PowerShell and SMO – be careful how you iterate

    - by Fatherjack
    I’ve yet to have a totally smooth experience with PowerShell and it was late on Friday when I crashed into this problem. I haven’t investigated if this is a generally well understood circumstance and if it is then I apologise for repeating everything. Scenario: I wanted to scan a number of server for many properties, including existing logins and to identify which accounts are bestowed with sysadmin privileges. A great task to pass to PowerShell, so with a heavy heart I started up PowerShellISE and started typing. The script doesn’t come easily to me but I follow the logic of SMO and the properties and methods available with the language so it seemed something I should be able to master. Version #1 of my script. And the results it returns when executed against my home laptop server. These results looked good and for a long time I was concerned with other parts of the script, for all intents and purposes quite happy that this was an accurate assessment of the server. Let’s just review my logic for each step of the code at the top. Lines 1 to 7 just set up our variables and write out the header message Line 8 our first loop, to go through each login on the server Line 10 an inner loop that will assess each role name that each login has been assigned Line 11 a test to see if each role has the name ‘sysadmin’ Line 13 write out the login name with a bright format as it is a sysadmin login Line 17 write out the login name with no formatting It is quite possible that here someone with more PowerShell experience than me will be shouting at their screen pointing at the error I made but to me this made total sense. Until I altered the code, I altered lines 6 and 7 of code above to be: $c = $Svr.Logins.Count write-host “There are $c Logins on the server” This changed my output to look like this: This started alarm bells ringing – there are clearly not 13 logins listed So, let’s see where things are going wrong, edit the script so it looks like this. I’ve highlighted the changes to make Running this code shows me these results Our $n variable should count up by one for each login returned and We are clearly missing some logins. I referenced this list back to Management Studio for my server and see the Logins as below, where there are clearly 13 logins. We see a Login called Annette in SSMS but not in the script results so I opened that up and looked at its properties and it’s server roles in particular. The account has only public access to the server. Inspection of the other logins that the PowerShell script misses out show they too are only members of the public role. Right now I can’t work out whether there is a good reason for this and if it should be expected behaviour or not. Please spend a few minutes to leave a comment if you have an opinion or theory for this. How to get the full list of logins. Clearly I needed to get a full list of the logins so set about reviewing my code to see if there was a better way to iterate through the roles for each login. This is the code that I came up with and I think it is doing everything that I need it to. It gives me the expected results like this: So it seems that the ListMembers() method is the trouble maker in my first versions of the code. I would have expected that ListMembers should return Logins that are only members of the public role, certainly Technet makes no reference to it being left out in it’s Login.ListMembers details. Suffice to say, it’s a lesson learned and I will approach using it with caution in future circumstances.

    Read the article

  • Microsoft Certifications &ndash; how to prep? and why?

    - by Kelly Jones
    I often get asked by my colleagues, “how do you prepare for Microsoft exams?” Well, the answer for me is a little complicated, so I thought I’d write up here what I do. The first thing I do is go to Microsoft’s website to find the exam that I need to take.  If you’re looking to get a particular certification, then their site lists the exam or exams that you’ll need to pass.  If you’ve already taken an exam, you can log onto the MCP website and use their certification planner.  This little tool tells you what tests you need, based on the exams you’ve already passed.  It is very helpful with the certifications that are multiple tests and especially ones that have electives. Once you’ve identified the test, you can use Microsoft’s website to see the topics that it covers.  This is a good outline to follow when you study.  I’ll keep this handy to reference back throughout my studying to make sure that I’m covering all the topics I need to know. The next step is probably where I am a little different from others.  IF the exam outline covers material that I’ve already been working with, then I’ll skip a lot of the studying and go directly to the practice tests.  However, if I’m looking at the outline and wondering how in the world do you do that? – then it’s time to hit the books. So, where to find study materials?  Try typing in the exam number into any search engine.  You’ll typically find a ton of resources.  If you’re lucky, you’ll find books that others recommend based on their studying and exam experience.  As a Sogeti employee, I have access to three really good resources: an internal company list of all of the consultants who have passed particular tests (on our Connex website), Books 24x7, and Transcender practice exams. Once my studying is done (either through books or experience), I’ll go through the practice exams.  I find them really helpful in getting my knowledge lined up to the thinking process that the exam writers use.  If I’m relying on my experience, then this really helps me to identify gaps in my knowledge that I’ll need to fill. That’s about it.  If I’m doing ok on the practice exams, then I’ll take the real thing.  I’ve found that the practice exams are usually more difficult than then real thing. Oh – one other thing I do related to Microsoft exams – I try to take any beta exams that Microsoft makes available that fall into my skill set.  Microsoft has started a blog to announce these and the seats usually fill up really quick.  The blog is at http://blogs.technet.com/betaexams/ . You don’t get your results instantly, like a normal exam, instead you have to wait for everyone to finish taking the beta exams and for Microsoft to determine which questions they are using and which they are dropping.  So, be prepared to wait six to eight weeks for your results.

    Read the article

  • Looking into CSS3 Multiple backgrounds

    - by nikolaosk
    In this post I will be looking into a great feature in CSS3 called multiple backgrounds.With CSS3 ourselves as web designers we can specify multiple background images for box elements, using nothing more than a simple comma-separated list. This is a very nice feature that can be useful in many websites.In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here.Before I go on with the actual demo I will use the (http://www.caniuse.com) to see the support for CSS 3 Multiple backgrounds from the latest versions of modern browsers.Please have a look in this link All modern browsers support this feature. I am typing this very simple HTML 5 markup with an internal CSS style.<!DOCTYPE html><html lang="en">  <head>    <title>Sold items</title>        <style>                #box{        border:1px solid #afafaf;        width:260px;        height:290px;        background-image:url(shirt.png), url(sold.jpg);        background-position: center bottom, right top;        background-repeat: no-repeat, no-repeat;    </style>    </head>  <body>    <header>                <h1>CSS3 Multiple backgrounds</h1>    </header>           <div id="box">              </div>        <footer>        <p>All Rights Reserved</p>      </footer>     </body>  </html>  Let me explain what I do here, multiple background images are specified using a comma-separated list of values for the background-image property.A comma separated list is also used for the other background properties such as background-repeat, background-position .So in the next three lines of CSS code         background-image:url(shirt.png), url(sold.jpg);        background-position: center bottom, right top;        background-repeat: no-repeat, no-repeat; we have 2 images placed in the div element. The first is placed center bottom in the div element and the second is placed at right top position inside the div element.Both images do not get repeated.I view the page in IE 10 and all the latest versions of Opera,Chrome and Firefox.Have a look at the picture below. Hope it helps!!!!

    Read the article

  • Review: Windows 8 - Initial Experience

    - by Tim Murphy
    I originally started this post when I had the Windows 8 preview setup on VirtualBox image.  I have since put the RTM bits on a Dell E6530 that is my new work laptop.  It isn’t a table so I am not getting the touch experience, but as a developer this makes the most sense for the moment. This is the first Windows OS that I have had to spend much time exploring to even get started.  The first thing I ran into was when I clicked on the desktop icon I was lost.  Where is the Start menu? Where are my programs?  How do I get back to the Metro environment?  I finally tried hitting the Windows button and it popped back out to the Metro screen. Once I got past that I found that the look of the Metro interface is clean and well organized.  It should be familiar to anyone who is already using a Zune or Windows Phone 7.  In the Desktop, aside from the lack of the Start button to bring up programs the desktop is just like the Windows 7 environment we are all used to.  I do have to say though that I don’t like popping out to the Metro screen to find program.  I think installers for programs like ones that developers usually work in for a desktop mode will need to give an option for creating a desktop icon and pinning to the task bar of the desktop. One of the things I do really enjoy is having live tiles in the Metro environment.  It is a nice way of feeding my need for constant information.  The one drawback though is that the task bar at the bottom of my screen used to be where I got this information without leaving what I was working on.  It allowed me to see current temperatures and when there were messages waiting.  I have since found that these still work as expected in the Desktop and Toast message keep you up on what is going on in the Metro apps. Thankfully familiar functionality like Alt-Tab and Windows-Tab still work regardless of if apps are in the Metro or the Desktop environment.  Add to this the ability to find any application on the Metro screen by simply typing and things get very comfortable. I also started exploring some of the apps.  If you want see a ton of stats on your team at a glance check out the Sports app.  What games are coming up? Who are the leaders in a number of stats?  The Weather and Finance apps have good features as well and I am sure they will improve as users supply feedback. I have had to install Visual Studio 2010 side-by-side with VS2012 because the Windows Phone 7 SDK would only install on VS2010.  This isn’t a Windows 8 issue per se, but something that you need to be aware of if you are a developer moving to the new ecosystem. The overall experience is a joy despite a few hiccups.  For anyone moving to Windows 8 in on a non-touch laptop or desktop I do suggest this list of keyboard shortcuts.  Enjoy. del.icio.us Tags: Windows 8,Win8,Metro,Review

    Read the article

  • Video works with 'Try me' but not after install. What is the difference? U12.04LTS,

    - by HarveyP
    My hard drive got corrupted so I did a reinstall. Tested Youtube in FF during 'try me' and it worked - jerky, but it worked. Instal without all the updates (576 outstanding now) in order to get ff installed as per the demo - to no avail. In 'try me' mode ff NEVER crashed! After install ff crashed whilst I was typing in 'youtube' in the address field. When I finally got to youtube - no video. What is the difference between ff in try me and ff after install? Off to try some selected updates now to see if I can see it for myself. In previous installation I had several profiles and aliased ff with -safe-mode switch to simplify startup of most stable ff. Also found that ff startup in graphic mode worked better (but still without video) with all of the extensions disabled and all of the plugins set to "ask" and always denied ... I have SiS graphic card in SiS Motherboard for XP and ancient Hyundai ImageQuest QV770 monitor. I have Ubuntu 12.04.01 LTS 1 day after install with only the immediate upgrades requested to language pack (English UK). Using FR Alternative keyboard. Connected with domestic wifi network from Orange (FT) I really want to use Skype, but won't bother installing it (again) without video as I can do my sms on FB - whilst ff is not crashed ... Update ... Is something overflowing? I have just had to reboot in order to get ff to restart in any way shape or form - restart on crash form generates new crash form, etc. It was however a good half hour before it crashed so some improvement over conditions before disk corruption. I have now installed all of the critical updates (332 recommended updates still outstanding) which included some relating to ff. Still no video. Still crashing - especially when on Grepolis website. Since the re-install I have had a lovely 1024x768 screen, but after last ff crash and reboot I got a message about 'low graphics mode' and 'setting things myself'. I was not sufficiently tuned in at the time to take proper note - I have no doubt I shall see it again and shall report accordingly. I still have only laptop options for my screen and do not know how to rectify this. Spent a few days with ubuntu on a different, newer machine which has now suffered a graphics breakdown. Returned to this old one again, but with new flat screen Monitor. Found SIS drivers for my graphics BUT it is intended for Red Hat 7.2. I chose this over the version for 7.0 because I thought what the hell, I might not be able to do anything with either of them but this is the later one ... The file will not open with software manager - found a similar problem on Overclock but it has not helped me to install this driver. File name is sis_drv.o-410 and it is currently idling away in my Downloads folder ... I have tried the solution offered on another sis problem, but this shows that my xserver-xorg-video-sis driver is up to date. I am now at a loss as to how to proceed if I can't install the latest sis driver from sis ... Does nobody know how FF changes from "try-me" to "installed"? Any time I MUST have video I reboot from the disk again, but this is tedious! Also one of the things I mock most about MS is the constant rebooting ... UPDATE 10/6/2014 I have installed chromium-browser - worse, crashes even more often than ff.I have installed epiphany - better; Video works but not the associated soundtrack.FireFox is version 14.01 in 'try me' and version 29.0 from my install. Would it be useful to try to downgrade FireFox in order to get video?

    Read the article

  • Squibbly: LibreOffice Integration Framework for the Java Desktop

    - by Geertjan
    Squibbly is a new framework for Java desktop applications that need to integrate with LibreOffice, or more generally, need office features as part of a Java desktop solution that could include, for example, JavaFX components. Here's what it looks like, right now, on Ubuntu 13.04: Why is the framework called Squibbly? Because I needed a unique-ish name, because "squibble" sounds a bit like "scribble" (which is what one does with text documents, etc), and because of the many absurd definitions in the Urban Dictionary for the apparently real word "squibble", e.g., "A name for someone who is squibblish in nature." And, another e.g., "A squibble is a small squabble. A squabble is a little skirmish." But the real reason is the first definition (and definitely not the fourth definition): "Taking a small portion of another persons something, such as a small hit off of a pipe, a bite of food, a sip of a drink, or drag of a cigarette." In other words, I took (or "squibbled") a small portion of LibreOffice, i.e., OfficeBean, and integrated it into a NetBeans Platform application. Now anyone can add new features to it, to do anything they need, such as create a legislative software system as Propylon has done with their own solution on the NetBeans Platform: For me, the starting point was Chuk Munn Lee's similar solution from some years ago. However, he uses reflection a lot in that solution, because he didn't want to bundle the related JARs with the application. I understand that benefit but I find it even more beneficial to not need to require the user to specify the location of the LibreOffice location, since all the necessary JARs and native libraries (currently 32-bit Linux only, by the way) are bundled with the application. Plus, hundreds of lines of reflection code, as in Chuk's solution, is not fun to work with at all. Switching between applications is done like this: It's a work in progress, a proof of concept only. Just the result of a few hours of work to get the basic integration to work. Several problems remain, some of them potentially unsolvable, starting with these, but others will be added here as I identify them: Window management problems. I'd like to let the user have multiple LibreOffice applications and documents open at the same time, each in a new TopComponent. However, I haven't figured out how to do that. Right now, each application is opened into the same TopComponent, replacing the currently open application. I don't know the OfficeBean API well enough, e.g., should a single OfficeBean be shared among multiple TopComponents or should each of them have their own instance of it? Focus problems. When putting the application behind other applications and then switching back to the application, typing text becomes impossible. When closing a TopComponent and reopening it, the content is lost completely. Somehow the loss of focus, and then the return of focus, disables something. No idea how to fix that. The project is checked into this location, which isn't public yet, so you can't access it yet. Once it's publicly available, it would be great to get some code contributions and tweaks, etc. https://java.net/projects/squibbly Here's the source structure, showing especially how the OfficeBean JARs and native libraries (currently for Linux 32-bit only) fit in: Ultimately, would be cool to integrate or share code with http://joeffice.com!

    Read the article

  • iOS 5 New Features vs Android

    - by kerry
    Browsing through the iOS 5 features list, I can’t help but notice a lot of it is catch up. Having owned both an iPhone and an Android for a considerable amount of time, I figured I would jot down my opinions. Notification Center – Completely ripped off from Android but looks good and is a much needed addition iMessage – This is very interesting as most people who would think it’s cool, probably really wouldn’t understand the significance.  Basically, Apple is adding an IM application to iOS.  Now iPhone / iPad users can sit around messaging each other how cool it is like Crackberry users circa 2003.  I guess the only real improvement over MMS is that you can easily setup groups, see when each other are typing, and don’t incur text messaging charges; at the expense of leaving your non-iOS buddies out (who wants to talk to those losers anyways?). Newstand – An app update and not an OS one (Apple typically doesn’t make distinctions).  It all seems like stuff my current Nook stuff will do.  Note: I did look to compare prices but it seems that information is not available without downloading iTunes.  lame. Reminders – TODO lists are ho hum, but the ability to have reminders when you arrive or leave a position is pretty cool. Twitter integration – The fact that the best Apple can come up with is ‘one at a timing’ online service integration is laughable at best. Camera – Can control it from the lock screen.  Now you’ll have tons of pocket lint photos in your iCloud to go along with the wicked shot of that cheetah that just unexpectedly ran by your apartment. Photos – Speaking of iCloud, all of your devices photos will be synced through it.  That’s cool I guess, not sure if Android will do the same. Safari – What?  You haven’t been reading rss feeds on your device this whole time?  Something tells me you aren’t about to start. PC Free – Finely Apple untethers the iPhone.  What took them so long? Game Center – This should be an interesting service.  Attention Apple fanboys immediately forget how they are blatantly copying Microsoft achievements (at least rename them). Wifi Sync – Just couldn’t cut the cord completely could they?  For what it’s worth, the Zune has been doing this for 5 years now. All in all a pretty big update.  Mostly iCloud.  Mostly keeping up the mobile status quo.  As an Android user, I can’t say there is anything I am envious of.

    Read the article

  • Access Control Lists for Roles

    - by Kyle Hatlestad
    Back in an earlier post, I wrote about how to enable entity security (access control lists, aka ACLs) for UCM 11g PS3.  Well, there was actually an additional security option that was included in that release but not fully supported yet (only for Fusion Applications).  It's the ability to define Roles as ACLs to entities (documents and folders).  But now in PS5, this security option is now fully supported.   The benefit of defining Roles for ACLs is that those user roles come from the enterprise security directory (e.g. OID, Active Directory, etc) and thus the WebCenter Content administrator does not need to define them like they do with ACL Groups (Aliases).  So it's a bit of best of both worlds.  Users are managed through the LDAP repository and are automatically granted/denied access through their group membership which are mapped to Roles in WCC.  A different way to think about it is being able to add multiple Accounts to content items...which I often get asked about.  Because LDAP groups can map to Accounts, there has always been this association between the LDAP groups and access to the entity in WCC.  But that mapping had to define the specific level of access (RWDA) and you could only apply one Account per content item or folder.  With Roles for ACLs, it basically takes away both of those restrictions by allowing users to define more then one Role and define the level of access on-the-fly. To turn on ACLs for Roles, there is a component to enable.  On the Component Manager page, click the 'advanced component manager' link in the description paragraph at the top.   In the list of Disabled Components, enable the RoleEntityACL component. Then restart.  This is assuming the other configuration settings have been made for the other ACLs in the earlier post.   Once enabled, a new metadata field called xClbraRoleList will be created.  If you are using OracleTextSearch as the search indexer, be sure to run a Fast Rebuild on the collection. For Users and Groups, these values are automatically picked up from the corresponding database tables.  In the case of Roles, there is an explicitly defined list of choices that are made available.  These values must match the roles that are coming from the enterprise security repository. To add these values, go to Administration -> Admin Applets -> Configuration Manager.  On the Views tab, edit the values for the ExternalRolesView.  By default, 'guest' and 'authenticated' are added.  Once added, you can assign the roles to your content or folder. If you are a user that can both access the Security Group for that item and you belong to that particular Role, you now have access to that item.  If you don't belong to that Role, you won't! [Extra] Because the selection mechanism for the list is using a type-ahead field, users may not even know the possible choices to start typing to.  To help them, one thing you can add to the form is a placeholder field which offers the entire list of roles as an option list they can scroll through (assuming its a manageable size)  and view to know what to type to.  By being a placeholder field, it won't need to be added to the custom metadata database table or search engine.  

    Read the article

  • Software and/(x)or Hardware Projects for Pre-School Kids

    - by haylem
    I offered to participate at my kid's pre-school for various activities (yes, I'm crazy like that), and one of them is to help them discover extra-curricular (big word for a pre-school, but by lack of a better one... :)) hobbies, which may or may not relate to a professional activity. At first I thought that it wouldn't be really easy to have pre-schoolers relate to programming or the internal workings of a computer system in general (and I'm more used to teaching middle-school to university-level students), but then I thought there must be a way. So I'm trying to figure out ways to introduce very young kids (3yo) to computer systems in a fun and preferably educational way. Of course, I don't expect them to start smashing the stack for fun and profit right away (or at least not voluntarily, though I could use the occasion for some toddler tests...), but I'm confident there must be ways to get them interested in both: using the systems, becoming curious about understanding what they do, interacting with the systems to modify them. I guess this setting is not really relevant after all, it's pretty much the same as if you were aiming to achieve the same for your own kids at home. Ideas Considering we're talking 3yo pre-schoolers here, and that at this age some kids are already quite confident using a mouse (some even a keyboard, if not for typing, at least to press some buttons they've come to associate with actions) while others have not yet had any interaction with computers of any kind, it needs to be: rather basic, demonstrated and played with in less then 5 or 10 minutes, doable in in groups or alone, scalable and extendable in complexity to accommodate their varying abilities. The obvious options are: basic smallish games to play with, interactive systems like LOGO, Kojo, Squeak and clones (possibly even simpler than that), or thngs like Lego Systems. I guess it can be a thing to reflect on both at the software and the hardware levels: it could be done with a desktop or laptop machine, a tablet, a smartphone (or a crap-phone, for that matter, as long as you can modify it), or even get down to building something from scratch (Raspberry Pi and Arduino being popular options at the moment). I can probably be in the form of games, funny visualizations (which are pretty much games) w/ Prototype, virtual worlds to explore. I also thought on the moment (and I hope this won't offend anyone) that some approaches to teaching pets could work (reward systems, haptic feedback and such things could quickly point a kid in the right direction to understanding how things work, in a similar fashion - I'm not suggesting to shock the kids!). Hmm, Is There an Actual Question in There? What type of systems do you think might be a good fit, both in terms of hardware and software? Do you have seen such systems, or have anything in mind to work on? Are you aware of some research in this domain, with tangible results? Any input is welcome. It's not that I don't see options: there are tons, but I have a harder time pinpointing a more concrete and definite type of project/activity, so I figure some have valuable ideas or existing ones. Note: I am not advocating that every kid should learn to program, be interested in computer systems, or that all of them in a class would even care enough to follow such an introduction with more than a blank stare. I don't buy into the "everybody would benefit from learning to program" thing. Wouldn't hurt, but not necessary in any way. But if I can walk out of there with a few of them having smiled using the thing (or heck, cried because others took them away from them), that'd be good enough. Related Questions I've seen and that seem to complement what I'm looking for, but not exactly for the same age groups or with the same goals: Teaching Programming to Kids Recommendations for teaching kids math concepts & skills for programming?

    Read the article

  • Postfix/SMTPD Relay Access Denied when sending outside the network

    - by David
    I asked a very similar question some 4 or 5 months ago, but haven't tracked down a suitable answer. I decided to post a new question so that I can ... a) Post updated info b) post my most current postconf -n output When a user sends mail from inside the network (via webmail) to email addresses both inside and outside the network, the email is delivered. When a user with an email account on the system sends mail from outside the network, using the server as the relay, to addresses inside the network, the email is delivered. But [sometimes] when a user connects via SMTPD to send email to an external address, a Relay Access Denied error is returned: Feb 25 19:33:49 myers postfix/smtpd[8044]: NOQUEUE: reject: RCPT from host-68-169-158-182.WISOLT2.epbfi.com[68.169.158.182]: 554 5.7.1 <host-68-169-158-182.WISOLT2.epbfi.com[68.169.158.182]>: Client host rejected: Access denied; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<my-computer-name> Feb 25 19:33:52 myers postfix/smtpd[8044]: disconnect from host-68-169-158-182.WISOLT2.epbfi.com[68.169.158.182] Sending this through Microsoft Outlook 2003 generates the above log. However, sending through my iPhone, with the exact same settings, goes through fine: Feb 25 19:37:18 myers postfix/qmgr[3619]: A2D861302C9: from=<[email protected]>, size=1382, nrcpt=1 (queue active) Feb 25 19:37:18 myers amavis[2799]: (02799-09) FWD via SMTP: <[email protected]> -> <[email protected]>,BODY=7BIT 250 2.0.0 Ok, id=02799-09, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as A2D861302C9 Feb 25 19:37:18 myers amavis[2799]: (02799-09) Passed CLEAN, [68.169.158.182] [68.169.158.182] <[email protected]> -> <[email protected]>, Message-ID: <[email protected]>, mail_id: yMLvzVQJloFV, Hits: -9.607, size: 897, queued_as: A2D861302C9, 6283 ms Feb 25 19:37:18 myers postfix/lmtp[8752]: 2ED3A1302C8: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=6.6, delays=0.25/0.01/0.19/6.1, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=02799-09, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as A2D861302C9) Feb 25 19:37:18 myers postfix/qmgr[3619]: 2ED3A1302C8: removed Outgoing Settings on Outlook 2003 match the settings on my iPhone: SMTP server: mail.my-domain.com Username: My full email address Uses SSL Server Port 587 Now, here's postconf -n. I realize the "My Networks" Parameter is a bit nasty. I have these IP addresses in here for just this reason, as others have been complaining of this problem too: alias_database = hash:/etc/postfix/aliases alias_maps = $alias_database append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix content_filter = amavisfeed:[127.0.0.1]:10024 daemon_directory = /usr/libexec/postfix debug_peer_level = 2 disable_vrfy_command = yes html_directory = no inet_interfaces = all mail_owner = postfix mail_spool_directory = /var/spool/mail mailbox_size_limit = 0 mailq_path = /usr/bin/mailq manpage_directory = /usr/share/man message_size_limit = 20480000 mydestination = $myhostname, localhost, localhost.$mydomain mydomain = my-domain.com myhostname = myers.my-domain.com mynetworks = 127.0.0.0/8, 74.125.113.27, 74.125.82.49, 74.125.79.27, 209.85.161.0/24, 209.85.214.0/24, 209.85.216.0/24, 209.85.212.0/24, 209.85.160.0/24 myorigin = $myhostname newaliases_path = /usr/bin/newaliases queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES receive_override_options = no_address_mappings recipient_delimiter = + relay_domains = $mydestination sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail setgid_group = postdrop smtp_bind_address = my-primary-server's IP address smtpd_banner = mail.my-domain.com smtpd_helo_required = yes smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/mailserver/postfix.pem smtpd_tls_key_file = /etc/ssl/mailserver/private/postfix.pem smtpd_tls_loglevel = 3 smtpd_tls_received_header = no smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 554 virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf,mysql:/etc/postfix/mysql-email2email.cf virtual_gid_maps = static:5000 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf virtual_minimum_uid = 5000 virtual_transport = dovecot virtual_uid_maps = static:5000 If anyone has any ideas and can help me finally solve this issue once and for all, I'd be eternally grateful.

    Read the article

  • Running two wsgi applications on the same server gdal org exception with apache2/modwsgi

    - by monkut
    I'm trying to run two wsgi applications, one django and the other tilestache using the same server. The tilestache server accesses the db via django to query the db. In the process of serving tiles it performs a transform on the incoming bbox, and in this process hit's the following error. The transform works without error for the specific bbox polygon when run manually from the python shell: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/TileStache/__init__.py", line 325, in __call__ mimetype, content = requestHandler(self.config, environ['PATH_INFO'], environ['QUERY_STRING']) File "/usr/lib/python2.7/dist-packages/TileStache/__init__.py", line 231, in requestHandler mimetype, content = getTile(layer, coord, extension) File "/usr/lib/python2.7/dist-packages/TileStache/__init__.py", line 84, in getTile tile = layer.render(coord, format) File "/usr/lib/python2.7/dist-packages/TileStache/Core.py", line 295, in render tile = provider.renderArea(width, height, srs, xmin, ymin, xmax, ymax, coord.zoom) File "/var/www/tileserver/providers.py", line 59, in renderArea bbox.transform(METERS_SRID) File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/geos/geometry.py", line 520, in transform g = gdal.OGRGeometry(self.wkb, srid) File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/gdal/geometries.py", line 131, in __init__ self.__class__ = GEO_CLASSES[self.geom_type.num] File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/gdal/geometries.py", line 245, in geom_type return OGRGeomType(capi.get_geom_type(self.ptr)) File "/usr/local/lib/python2.7/dist-packages/django/contrib/gis/gdal/geomtype.py", line 43, in __init__ raise OGRException('Invalid OGR Integer Type: %d' % type_input) OGRException: Invalid OGR Integer Type: 1987180391 I think I've hit the non thread safe issue with GDAL, metioned on the django site. Is there a way I could configure this so that it would work? Apache Version: Apache/2.2.22 (Ubuntu) mod_wsgi/3.3 Python/2.7.3 configured Apache apache2/sites-available/default: <VirtualHost *:80> ServerAdmin ironman@localhost DocumentRoot /var/www/bin LogLevel warn WSGIDaemonProcess lbs processes=2 maximum-requests=500 threads=1 WSGIProcessGroup lbs WSGIScriptAlias / /var/www/bin/apache/django.wsgi Alias /static /var/www/lbs/static/ </VirtualHost> <VirtualHost *:8080> ServerAdmin ironman@localhost DocumentRoot /var/www/bin LogLevel warn WSGIDaemonProcess tilestache processes=1 maximum-requests=500 threads=1 WSGIProcessGroup tilestache WSGIScriptAlias / /var/www/bin/tileserver/tilestache.wsgi </VirtualHost> Django Version: 1.4 httpd.conf: Listen 8080 NameVirtualHost *:8080 UPDATE I've added the a test.wsgi script to determine if the GLOBAL interpreter setting is correct, as mentioned by graham and described here: http://code.google.com/p/modwsgi/wiki/CheckingYourInstallation#Sub_Interpreter_Being_Used It seems to show the expected result: [Tue Aug 14 10:32:01 2012] [notice] Apache/2.2.22 (Ubuntu) mod_wsgi/3.3 Python/2.7.3 configured -- resuming normal operations [Tue Aug 14 10:32:01 2012] [info] mod_wsgi (pid=29891): Attach interpreter ''. I've worked around the issue for now by changing the srs used in the db so that the transform is unnecessary in tilestache app. I don't understand why the transform() method, when called in the django app works, but then in the tilestache app fails. tilestache.wsgi #!/usr/bin/python import os import time import sys import TileStache current_dir = os.path.abspath(os.path.dirname(__file__)) project_dir = os.path.realpath(os.path.join(current_dir, "..", "..")) sys.path.append(project_dir) sys.path.append(current_dir) os.environ['DJANGO_SETTINGS_MODULE'] = 'bin.settings' sys.stdout = sys.stderr # wait for the apache django lbs server to start up, # --> in order to retrieve the tilestache cfg time.sleep(2) tilestache_config_url = "http://127.0.0.1/tilestache/config/" application = TileStache.WSGITileServer(tilestache_config_url) UPDATE 2 So it turned out I did need to use a projection other than the google (900913) one in the db. So my previous workaround failed. While I'd like to fix this issue, I decided to work around the issue this type by making a django view that performs the transform needed. So now tilestache requests the data through the django app and not internally.

    Read the article

  • eth0 and eth1 both assigned same IP on boot

    - by Banjer
    I have a physical SLES 11 SP2 server on a Sun Fire x4140 that is giving me problems with networking upon reboot. The NICs are onboard. The networking appears successful during boot, but network services such as nfs fail hard. This is because eth0 and eth1 are both receiving the same configuration and are both ifup-ed. Once everything times out and I'm at the console, ifconfig shows that eth0 and eth1 are UP and running with the same IP. Attempting to ping anything in that subnet fails. Restarting the network service fixes the issue. eth0 is the correct NIC that should be configured as primary, per the MAC address. Question: Whats causing eth1 to be brought up with the same config as eth0?? I do not have a config script set up for eth1: banjer@harp:~> ls -la /etc/sysconfig/network/ total 104 drwxr-xr-x 6 root root 4096 Jun 11 12:21 . drwxr-xr-x 6 root root 4096 Apr 10 09:46 .. -rw-r--r-- 1 root root 13916 Apr 10 09:32 config -rw-r--r-- 1 root root 9952 Apr 10 09:36 dhcp -rw------- 1 root root 180 Jun 11 12:21 ifcfg-eth0 -rw------- 1 root root 180 Jun 11 12:21 ifcfg-eth3 -rw------- 1 root root 172 Feb 1 08:32 ifcfg-lo -rw-r--r-- 1 root root 29333 Feb 1 08:32 ifcfg.template drwxr-xr-x 2 root root 4096 Apr 10 09:32 if-down.d -rw-r--r-- 1 root root 239 Feb 1 08:32 ifroute-lo drwxr-xr-x 2 root root 4096 Apr 10 09:33 if-up.d drwx------ 2 root root 4096 May 5 2010 providers -rw-r--r-- 1 root root 25 Nov 16 2010 routes drwxr-xr-x 2 root root 4096 Apr 10 09:36 scripts On a side note, eth3 is also configured with an IP in a different subnet, but this has not posed any problems. FYI the kernel module being used is forcedeth. banjer@harp:~> sudo cat /etc/sysconfig/network/ifcfg-eth0 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='172.21.64.25/20' MTU='' NAME='MCP55 Ethernet' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ONBOOT="yes" Here's eth3 in case you need to see it: banjer@harp:~> sudo cat /etc/sysconfig/network/ifcfg-eth3 BOOTPROTO='static' BROADCAST='' ETHTOOL_OPTIONS='' IPADDR='172.11.200.4/24' MTU='' NAME='MCP55 Ethernet' NETWORK='' REMOTE_IPADDR='' STARTMODE='auto' USERCONTROL='no' ONBOOT="yes" Perhaps is something related to udev? 70-persistent-net-rules looks OK to me, but I may not understand it completely. banjer@harp:~> cat /etc/udev/rules.d/70-persistent-net.rules # This file was automatically generated by the /lib/udev/write_net_rules # program, run by the persistent-net-generator.rules rules file. # # You can modify it, as long as you keep each rule on a single # line, and change only the value of the NAME= key. # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4a", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4b", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1" # PCI device 0x10de:0x0373 (forcedeth) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:18:4f:8d:85:4d", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3" # PCI device 0x1077:0x3032 (qla3xxx) SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:c1:dd:0e:34:6c", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4" Any other thoughts on what would cause this?

    Read the article

  • iptable CLUSTERIP won't work

    - by Rad Akefirad
    We have some requirements which explained here. We tried to satisfy them without any success as described. Here is the brief information: Here are requirements: 1. High Availability 2. Load Balancing Current Configuration: Server #1: one static (real) IP for each 10.17.243.11 Server #2: one static (real) IP for each 10.17.243.12 Cluster (virtual and shared among all servers) IP: 10.17.243.15 I tried to use CLUSTERIP to have the cluster IP by the following: on the server #1 iptables -I INPUT -i eth0 -d 10.17.243.15 -j CLUSTERIP --new --hashmode sourceip --clustermac 01:00:5E:00:00:20 --total-nodes 2 --local-node 1 on the server #2 iptables -I INPUT -i eth0 -d 10.17.243.15 -j CLUSTERIP --new --hashmode sourceip --clustermac 01:00:5E:00:00:20 --total-nodes 2 --local-node 2 When we try to ping 10.17.243.15 there is no reply. And the web service (tomcat on port 8080) is not accessible either. However we managed to get the packets on both servers by using TCPDUMP. Some useful information: iptable roules (iptables -L -n -v): Chain INPUT (policy ACCEPT 21775 packets, 1470K bytes) pkts bytes target prot opt in out source destination 0 0 CLUSTERIP all -- eth0 * 0.0.0.0/0 10.17.243.15 CLUSTERIP hashmode=sourceip clustermac=01:00:5E:00:00:20 total_nodes=2 local_node=1 hash_init=0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 14078 packets, 44M bytes) pkts bytes target prot opt in out source destination Log messages: ... kernel: [ 7.329017] e1000e: eth3 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None ... kernel: [ 7.329133] e1000e 0000:05:00.0: eth3: 10/100 speed: disabling TSO ... kernel: [ 7.329567] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready ... kernel: [ 71.333285] ip_tables: (C) 2000-2006 Netfilter Core Team ... kernel: [ 71.341804] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ... kernel: [ 71.343168] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully ... kernel: [ 108.456043] device eth0 entered promiscuous mode ... kernel: [ 112.678859] device eth0 left promiscuous mode ... kernel: [ 117.916050] device eth0 entered promiscuous mode ... kernel: [ 140.168848] device eth0 left promiscuous mode TCPDUMP while pinging: tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 12:11:55.335528 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2390, length 64 12:11:56.335778 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2391, length 64 12:11:57.336010 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2392, length 64 12:11:58.336287 IP (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 10.17.243.1 > 10.17.243.15: ICMP echo request, id 16162, seq 2393, length 64 And there is no ping reply as I said. Does anyone know which part I missed? Thanks in advance.

    Read the article

  • Can't logging in file from tomcat6 with log4j

    - by Ivan Nakov
    I have one stupid problem, which is killing me from hours. I'm trying to configure loggin to my project. I started with a simple Spring MVC project generated by STS, then added org.apache.log4j.RollingFileAppender to the existing log4j.xml file. <?xml version="1.0" encoding="UTF-8"?> <!-- Appenders --> <appender name="console" class="org.apache.log4j.ConsoleAppender"> <param name="Target" value="System.out" /> <layout class="org.apache.log4j.PatternLayout"> <param name="ConversionPattern" value="%-5p: %c - %m%n" /> </layout> </appender> <appender name="FilleAppender" class="org.apache.log4j.RollingFileAppender"> <param name="maxFileSize" value="100KB" /> <param name="maxBackupIndex" value="2" /> <param name="File" value="/home/ivan/Desktop/app.log" /> <layout class="org.apache.log4j.PatternLayout"> <param name="ConversionPattern" value="%d{ABSOLUTE} %5p %c{1}: %m%n " /> </layout> </appender> <!-- Application Loggers --> <logger name="org.elsys.logger"> <level value="debug" /> </logger> <!-- 3rdparty Loggers --> <logger name="org.springframework.core"> <level value="info" /> </logger> <logger name="org.springframework.beans"> <level value="info" /> </logger> <logger name="org.springframework.context"> <level value="info" /> </logger> <logger name="org.springframework.web"> <level value="info" /> </logger> <!-- Root Logger --> <root> <priority value="debug" /> <appender-ref ref="FilleAppender" /> </root> When I deploy project to tomcat6 server and open the url, logger doesn't generate log file. I'm trying to log from this controller: @Controller public class HomeController { private static final Logger logger = LoggerFactory.getLogger(HomeController.class); /** * Simply selects the home view to render by returning its name. */ @RequestMapping(value = "/", method = RequestMethod.GET) public String home(Locale locale, Model model) { logger.info("Welcome home! the client locale is "+ locale.toString()); Date date = new Date(); DateFormat dateFormat = DateFormat.getDateTimeInstance(DateFormat.LONG, DateFormat.LONG, locale); String formattedDate = dateFormat.format(date); logger.debug("send view"); model.addAttribute("serverTime", formattedDate ); return "home"; } } When I log from this simple Main.class, it works correct. public class Main { public static void main(String[] args) { Logger log = LoggerFactory.getLogger(Main.class); log.debug("Test"); } } I'm using tomcat6 and Ubuntu 11.10. I made a research in net and i found various options to fix this problem, but they don't help me. Please if someone have ideas how to fix it, help me.

    Read the article

  • DHCP and DNS services configuration for VOIP system, windows domain, etc

    - by Stemen
    My company has numerous physical offices (for purposes of this discussion, 15 buildings). Some of them are well-connected to our primary data center via fiber. Others will be connected to the data center by P2P T1. We are in the beginning stages of implementing an Avaya VOIP telephone system, and we will be replacing a significant portion of our network infrastructure in the process. In tandem with the phone system implementation, we are going to be re-addressing some of our networks, and consolidating most of our Windows domains into one (not all domains, just most). We currently have quite a few Windows domains, and they of course each have their own DNS zones. A few of those networks currently use DHCP, but the majority use static IP assignments for every device. I'm tired of managing static assignments -- I want to use DHCP configuration on everything except servers. Printers and etc will have DHCP reservations. The new IP phones will need to get IP addresses from DHCP, though they need to be in a separate VLAN from the computers/printers/etc. The computers and printers need to be registered in DNS. That's currently handled by the Windows DHCP servers on each of the respective domains. We need to place a priority on DHCP and DNS being available on a per-site basis (in case something were to interrupt the WAN connection) for computers and (primarily) phones. Smaller locations (which will have IP phones but not be a member of any Windows domain) will not have any Windows DNS/DHCP server(s) available. We also are looking for the easiest way to replace a part if it were to fail. That is to say, if a server/appliance/router hosting DHCP were to crash hard, and we couldn't extremely quickly recover the DHCP reservations and leases (and subsequently restore them onto a cold spare), we anticipate that bad things could happen. What is the best idea for how to re-implement DNS and DHCP keeping all of the above in mind? Some thoughts that have been raised (by myself or my coworkers): Use Windows DNS and DHCP servers, where they exist, and use IP helpers to route DHCP requests to some other Windows server if necessary. May not be acceptable if the WAN goes down and clients don't get a DHCP response. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by Cisco routers. Every site would be covered for DHCP, but from what I've read, Cisco routers can't handle dynamic registration of DHCP clients to Windows DNS servers, which might create a problem where Cisco routers are used for DHCP. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by some service running on an extremely low-price linux server. Is there any such software that would allow DHCP leases granted by these linux boxes to be dynamically registered on the Windows DNS servers? Come up with a Linux solution for both DNS and DHCP, and deploy low-price linux servers to every site. Requirements would be that the DNS zone be multi-master (like Windows DNS integrated with Active Directory), that DHCP be able to make dynamic DNS registrations in that zone, for every lease (where a hostname is provided and is thus possible), and that multiple servers be either authoritative for the same DHCP scope or at least receiving a real-time copy / replication / sync of the leases table so that if one server dies, we still know which MAC has what address. Purchase dedicated DNS/DHCP appliances, deploying to all sites. From what I read/see, this solves all of our technical problems. Then come the financial problems... I don't have a ton of money to spend on this. Or, some other solution that we've thus far overlooked and will consider upon recommendation. Can Cisco routers or Windows servers sync DHCP lease tables so that multiple servers can be authoritative (or active/passive for all I care) for the same scope, in case one of the partners were to fail? I've read online (repeatedly) that ISC's DHCP is able to maintain the same lease table across multiple servers, in order to solve this problem. Does anyone have any experience or advice to regarding that?

    Read the article

  • Using Juniper EX3300 as a router

    - by Richard Whitman
    So I have a Juniper EX3300 Switch. One of its uplink ports (ge-0/1/0) is connected to my ISP's router. ISP router's port address is xx.xx.xx.109. My switch's IP address is xx.xx.xx.110. From the switch, I can ping to xx.xx.xx.109 and any other IP in the world. I mean its connected to the Internet. I connected the port eth0 of a computer (running Ubuntu) to the port ge-0/0/0 of the switch (which in the same VLAN as ge-0/1/0). I configured the port eth0 as follows: iface eth0 inet static address yy.yy.yy.208 netmask 255.255.255.240 gateway xx.xx.xx.110 yy.yy.yy.208 is assigned to me by the ISP. So, now I can ping to the switch (xx.xx.xx.110) from this computer. But I can not ping to either xx.xx.xx.109 (ISP router) or any other IP. I want this computer to be connected to the Internet. What am I doing wrong? Here are some of the configurations on my switch: interfaces { ge-0/0/0 { unit 0 { family ethernet-switching; } } . . . ge-0/1/0 { ether-options { no-auto-negotiation; link-mode full-duplex; speed { 1g; } } unit 0 { family ethernet-switching { port-mode access; } } } . . . vlan { unit 0 { family inet { address 10.0.1.1/24; } } unit 1 { family inet { address xx.xx.xx.110/30; } } } } . . . routing-options { static { route 0.0.0.0/0 { next-hop xx.xx.xx.109; retain; } } } vlans { Cogent { vlan-id 3; interface { ge-0/1/0.0; ge-0/0/0.0; ge-0/0/1.0; ge-0/0/2.0; ge-0/0/3.0; } l3-interface vlan.1; } TFLan { vlan-id 2; interface { ge-0/0/5.0; ge-0/0/6.0; ge-0/0/7.0; ge-0/0/8.0; ge-0/0/9.0; ge-0/0/10.0; ge-0/0/11.0; ge-0/0/12.0; ge-0/0/13.0; ge-0/0/14.0; ge-0/0/15.0; ge-0/0/16.0; ge-0/0/17.0; ge-0/0/18.0; ge-0/0/19.0; ge-0/0/20.0; ge-0/0/21.0; ge-0/0/22.0; ge-0/0/23.0; ge-0/0/4.0; } l3-interface vlan.0; } }

    Read the article

  • CentOS 6.2 Bridge Setup for KVM

    - by Gaia
    I'm trying to set up bridged networking with KVM on CentOS 6.2 to no avail. There are plenty of docs and tutorials about it, but they all seem to conflict or don't provide info specific enough to my situation. I just don't get it. I access the host via public IP "xxx.xxx.128.58". All other available IPs (/29) should be bridged and made available to the only KVM guest (running a public facing LAMP stack) that will be setup on this machine. The amazingly unhelpful NOC people assigned the extra IPs to eth1. Is this correct? Should br0 bridge to eth0 or eth1? How do I set this up? Here is the relevant info: eth0 Link encap:Ethernet HWaddr 00:25:90:68:FE:BC inet6 addr: fe80::225:90ff:fe68:febc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:763 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:550811 (537.9 KiB) TX bytes:648 (648.0 b) Memory:fb980000-fba00000 eth1 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.58 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 inet6 addr: fe80::225:90ff:fe68:febd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1806 errors:0 dropped:0 overruns:0 frame:0 TX packets:1505 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:133166 (130.0 KiB) TX bytes:106070 (103.5 KiB) Memory:fb900000-fb980000 eth1:0 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.59 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:1 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.60 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:2 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.61 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 eth1:3 Link encap:Ethernet HWaddr 00:25:90:68:FE:BD inet addr:xxx.xxx.128.62 Bcast:xxx.xxx.128.63 Mask:255.255.255.248 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Memory:fb900000-fb980000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) virbr0 Link encap:Ethernet HWaddr 52:54:00:62:55:68 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) > cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=XXXX.domain.com > brctl show bridge name bridge id STP enabled interfaces br0 8000.00259068febc no eth0 virbr0 8000.525400625568 yes virbr0-nic > ls -fl | grep ifcfg -rw-r--r-- 1 root root 198 Jun 7 10:58 ifcfg-eth0 -rw-r--r--. 1 root root 254 Oct 7 2011 ifcfg-lo -rw-r--r-- 1 root root 77 Jun 6 18:51 ifcfg-eth1-range0 -rw-r--r-- 1 root root 168 Jun 6 18:50 ifcfg-eth1 > cat ifcfg-eth0 DEVICE="eth0" BOOTPROTO="static" BRIDGE="br0" HWADDR="00:25:90:68:FE:BC" IPV6INIT="yes" MTU="1500" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" IPADDR="yyy.yyy.216.131" NETMASK="255.255.255.128" > cat ifcfg-eth1 DEVICE="eth1" HWADDR="00:25:90:68:FE:BD" NM_CONTROLLED="yes" ONBOOT="yes" BOOTPROTO="static" IPADDR="xxx.xxx.128.58" NETMASK="255.255.255.248" GATEWAY="xxx.xxx.128.57" > cat ifcfg-eth1-range0 IPADDR_START="xxx.xxx.128.59" IPADDR_END="xxx.xxx.128.62" CLONENUM_START="0" Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xxx.xxx.128.56 * 255.255.255.248 U 0 0 0 eth1 192.168.122.0 * 255.255.255.0 U 0 0 0 virbr0 link-local * 255.255.0.0 U 1003 0 0 eth1 default xxx.xxx.128.57 0.0.0.0 UG 0 0 0 eth1

    Read the article

  • Postfix sasl login failing no mechanism found

    - by Nat45928
    following the link here: http://flurdy.com/docs/postfix/ with posfix, courier, MySql, and sasl gave me a web server that has imap functionality working fine but when i go to log into the server to send a message using the same user id and password for connecting the the imap server it rejects my login to the smtp server. If i do not specify a login for the outgoing mail server then it will send the message just fine. the error in postfix's log is: Jul 6 17:26:10 Sj-Linux postfix/smtpd[19139]: connect from unknown[10.0.0.50] Jul 6 17:26:10 Sj-Linux postfix/smtpd[19139]: warning: SASL authentication failure: unable to canonify user and get auxprops Jul 6 17:26:10 Sj-Linux postfix/smtpd[19139]: warning: unknown[10.0.0.50]: SASL DIGEST-MD5 authentication failed: no mechanism available Jul 6 17:26:10 Sj-Linux postfix/smtpd[19139]: warning: unknown[10.0.0.50]: SASL LOGIN authentication failed: no mechanism available Ive checked all usernames and passwords for mysql. what could be going wrong? edit: here is some other information: installed libraires for postfix, courier and sasl: aptitude install postfix postfix-mysql aptitude install libsasl2-modules libsasl2-modules-sql libgsasl7 libauthen-sasl-cyrus-perl sasl2-bin libpam-mysql aptitude install courier-base courier-authdaemon courier-authlib-mysql courier-imap courier-imap-ssl courier-ssl and here is my /etc/postfix/main.cf myorigin = domain.com smtpd_banner = $myhostname ESMTP $mail_name biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. #myhostname = my hostname alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname local_recipient_maps = mydestination = relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all mynetworks_style = host # how long if undelivered before sending warning update to sender delay_warning_time = 4h # will it be a permanent error or temporary unknown_local_recipient_reject_code = 450 # how long to keep message on queue before return as failed. # some have 3 days, I have 16 days as I am backup server for some people # whom go on holiday with their server switched off. maximal_queue_lifetime = 7d # max and min time in seconds between retries if connection failed minimal_backoff_time = 1000s maximal_backoff_time = 8000s # how long to wait when servers connect before receiving rest of data smtp_helo_timeout = 60s # how many address can be used in one message. # effective stopper to mass spammers, accidental copy in whole address list # but may restrict intentional mail shots. # but may restrict intentional mail shots. smtpd_recipient_limit = 16 # how many error before back off. smtpd_soft_error_limit = 3 # how many max errors before blocking it. smtpd_hard_error_limit = 12 # Requirements for the HELO statement smtpd_helo_restrictions = permit_mynetworks, permit # Requirements for the sender details smtpd_sender_restrictions = permit_sasl_authenticated, permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_pipelining, permit # Requirements for the connecting server smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.njabl.org # Requirement for the recipient address smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_recipient, reject_unknown_recipient_domain, reject_unauth_destination, permit smtpd_data_restrictions = reject_unauth_pipelining # require proper helo at connections smtpd_helo_required = yes # waste spammers time before rejecting them smtpd_delay_reject = yes disable_vrfy_command = yes # not sure of the difference of the next two # but they are needed for local aliasing alias_maps = hash:/etc/postfix/aliases alias_database = hash:/etc/postfix/aliases # this specifies where the virtual mailbox folders will be located virtual_mailbox_base = /var/spool/mail/virtual # this is for the mailbox location for each user virtual_mailbox_maps = mysql:/etc/postfix/mysql_mailbox.cf # and this is for aliases virtual_alias_maps = mysql:/etc/postfix/mysql_alias.cf # and this is for domain lookups virtual_mailbox_domains = mysql:/etc/postfix/mysql_domains.cf # this is how to connect to the domains (all virtual, but the option is there) # not used yet # transport_maps = mysql:/etc/postfix/mysql_transport.cf virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 # SASL smtpd_sasl_auth_enable = yes # If your potential clients use Outlook Express or other older clients # this needs to be set to yes broken_sasl_auth_clients = yes smtpd_sasl_security_options = noanonymous smtpd_sasl_local_domain =

    Read the article

  • Having Hotlink Protectin problem in nginx

    - by Ayaz Malik
    Hello, i am having image hotlink protection problem in my nginx need help. i have a huge issue of my site's images being submited to social networks like stumbleupon with direct link ... xxxxx.jpg which some times get huge traffic and increases cpu usage plus bandwidth usage. what i am trying to do is block direct access to image from other refrers and hotlink protection. Here is the code from my vhost.conf server { access_log off; error_log logs/vhost-error_log warn; listen 80; server_name mydomain.com www.mydomain.com; # uncomment location below to make nginx serve static files instead of Apache # NOTE this will cause issues with bandwidth accounting as files wont be logged location ~* \.(gif|jpg|jpeg|png|wmv|avi|mpg|mpeg|mp4|htm|html|js|css)$ { root /home/username/public_html; expires 1d; } root /home/mydomain/public_html; } location / { client_max_body_size 10m; client_body_buffer_size 128k; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; # you can increase proxy_buffers here to suppress "an upstream response # is buffered to a temporary file" warning proxy_buffers 16 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_connect_timeout 30s; proxy_redirect http://www.mydomain.com:81 http://www.mydomain.com; proxy_redirect http://mydomain.com:81 http://mydomain.com; proxy_pass http://ip_address/; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; expires 24h; } } So for hotlink protection i added this code : location ~* (\.jpg|\.png|\.gif|\.jpeg)$ { valid_referers blocked www.mydomain.com mydomain.com; if ($invalid_referer) { return 403; } This is how the current nginx code for this domain looks like but didn't worked: server { access_log off; error_log logs/vhost-error_log warn; listen 80; server_name mydomain.com www.mydomain.com; # uncomment location below to make nginx serve static files instead of Apache # NOTE this will cause issues with bandwidth accounting as files wont be logged location ~* \.(gif|jpg|jpeg|png|wmv|avi|mpg|mpeg|mp4|htm|html|js|css)$ { root /home/username/public_html; expires 1d; } root /home/mydomain/public_html; } location ~* (\.jpg|\.png|\.gif|\.jpeg)$ { valid_referers blocked www.mydomain.com mydomain.com; if ($invalid_referer) { return 403; } location / { client_max_body_size 10m; client_body_buffer_size 128k; proxy_send_timeout 90; proxy_read_timeout 90; proxy_buffer_size 4k; # you can increase proxy_buffers here to suppress "an upstream response # is buffered to a temporary file" warning proxy_buffers 16 32k; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_connect_timeout 30s; proxy_redirect http://www.mydomain.com:81 http://www.mydomain.com; proxy_redirect http://mydomain.com:81 http://mydomain.com; proxy_pass http://ip_address/; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; expires 24h; } } Thank you in advance :) cheers

    Read the article

  • Centos/OVH: public IP on KVM virtual machine

    - by Sébastien
    Since a few days, I'm trying to configure my KVM vm to have a public IP address, without any success. First, I'm on OVH, and you need to know they don't allow networking from different mac addresses. I have so registered a virtual mac address associated with my failover IP Here's my configuration: Guest wanted IP: 46.105.40.x Host IP: 176.31.240.x Host configuration dummy0 interface: ifcfg-dummy0 BOOTPROTO=static IPADDR=10.0.0.1 NETMASK=255.0.0.0 ONBOOT=yes NM_CONTROLLED=no ARP=yes BRIDGE=br0 br0 bridge: ifcfg-br0 DEVICE=br0 TYPE=Bridge DELAY=0 ONBOOT=yes BOOTPROTO=static IPADDR=192.168.1.1 NETMASK=255.255.255.0 PEERDNS=yes NM_CONTROLLED=no ARP=yes Failover ip is redirected to the br0 bridge with ip route add 46.105.40.xxx dev br0 > cat /proc/sys/net/ipv4/ip_forward 1 > cat /proc/sys/net/ipv4/conf/vnet0/proxy_arp 1 > route -n Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 176.31.240.254 0.0.0.0 UG 0 0 0 eth0 46.105.40.x 0.0.0.0 255.255.255.255 UH 0 0 0 br0 176.31.240.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 Guest configuration: KVM: <interface type='bridge'> <mac address='02:00:00:30:22:05'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/> </interface> I've borrowed most of the OVH configuration here (in french, http://guides.ovh.com/BridgeClient) for the guest configuration eth0 interface: ifcfg-eth0 DEVICE="eth0" BOOTPROTO=none HWADDR="02:00:00:30:22:05" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" UUID="e9138469-0d81-4ee6-b5ab-de0d7d17d1c8" USERCTL=no PEERDNS=yes IPADDR=46.105.40.xxx NETMASK=255.255.255.255 GATEWAY=176.31.240.254 ARP=yes For the routes, I have in route-eth0: 176.31.240.254 dev eth0 default via 176.31.240.254 dev eth0 With this configuration, I don't have any access to the internet. The only thing I can do is to ping the public ip of the host, nothing more. My final conclusion is that the route does not work, because, when, on the guest, I run ping 8.8.8.8, I have, on the host: > tcpdump -i vnet0 icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on br0, link-type EN10MB (Ethernet), capture size 65535 bytes 13:38:09.009324 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50183, seq 1, length 64 13:38:09.815344 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50183, seq 2, length 64 I never get the ping reply, only the request. It seems Guest - Host communication is fine. On eth0: > tcpdump -i eth0 icmp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 13:39:40.240561 IP 46-105-40-xxx.kimsufi.com > google-public-dns-a.google.com: ICMP echo request, id 50439, seq 1, length 64 13:39:40.250161 IP google-public-dns-a.google.com > 46-105-40-xxx.kimsufi.com: ICMP echo reply, id 50439, seq 1, length 64 I have the request and the reply on eth0, but reply is not forwarded to the bridge. I really don't understand why, I though it was the aim of the route to do that! IPtables is disabled on both host and guest. I really hope some of you will be able to help me! Many thanks in advance, Sébastien

    Read the article

< Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >