Search Results

Search found 19539 results on 782 pages for 'pretty print'.

Page 363/782 | < Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >

• VM clients can not access WAN

  - by Saariko

  I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

  Read the article

• Poor CPU usage under Ubuntu

  - by remek

  Hello, I just upgraded from Ubuntu 9.10 to Ubuntu 10.04 and I am now experiencing a strange problem. My computer has a quad-core processor, and when I am running several processes simultaneously, none of the cores is fully used. Before the upgrade, when I was running 4 processes, each of them was using 100% CPU (I could see that with the 'top' command). But now, CPU usage oscillates and is always pretty low. Has anybody an idea about this problem? Is it due to Ubuntu or to the program I am running? Thank you very much in advance for your help! Best, remek

  Read the article

• Why doesn't openSUSE Linux upgrade itself through its software repositories?

  - by Dougal

  openSUSE - fast becoming my favourite Linux distro on the client - doesn't seem to upgrade itself through its own configured software repositories. Do we know why this is the case? Is it a money-making thing where they can then sell upgrade CDs / DVDs? I mean, pretty much every other Linux upgrades itself through the normal software repositories. For example, Ubuntu can upgrade itself from 10.4 to 10.10 just through the normal software package upgrade procedure. Why must it be a huge procedure to upgrade openSUSE? Any knowledge or ideas appreciated. Thank you.

  Read the article

• Nagios and rrd on a old server

  - by Pier

  I have an old server (P4 based) on which nagios (and all the other tools to monitor) is running. In the last few weeks we are seeing a strange behavior. In the /var/spool/pnp4nagios (where temporary files are stored before getting processed by pnp4nagios daemon) we have many files like perfdata.1274949941-PID-18839 and we get an error in npcd.log: [05-27-2010 11:17:46] NPCD: ThreadCounter 0/15 File is perfdata.1274951306-PID-27849 [05-27-2010 11:17:46] NPCD: File 'perfdata.1274951306-PID-27849' is an already in process PNP file. Leaving it untouched. Sometimes some graph are not drawn. The server is pretty loaded (around 5-6 normally) and i suspect that npcd goes in timeout and leave those files behind. What could I do (apart from change the server)? Few infos about the system: centos 5.5 nagios 3.2.1 pnp4nagios 0.6 (from sources) Thanks

  Read the article

• Mobile Intel 965 vs 4 Series chipset speed differences

  - by graham.reeds

  A client of ours is having a problem panning on a mapping application that we write on their panasonic toughbooks (CF-19's). One of their toughbooks the panning is fairly smooth while on the other it is really slow. Doesn't help that they have all the settings turned up, but I would of thought any reasonably new graphics card (even shared memory) would have more than adequate graphic speed. I am pretty sure that the graphic adapter is to blame, but I can't find anything out about either chipset (level of acceleration, non-problems, etc). All I get is the intel data sheets. The faster panning one is on the Mobile Intel 4 Series Express Chipset while the slower is on the Mobile Intel 965 Express Chipset. Is this expected? Does it sound like a driver problem? They both have the same amount of ram and same cpu.

  Read the article

• Where to download MS SQL Server 2005 Developer Edition?

  - by Mark

  Just got put in charge of a big web project. All I know is the web server is running MS SQL 2005, so I need something comparable to test locally. I figure developer edition is my best bet because it offers everything that the enterprise edition does, but is for development purposes only. But this page is pretty worthless http://www.microsoft.com/sqlserver/2005/en/us/developer.aspx Where do I actually download it? What about SQL 2005 Express? Would that meet my needs? I can't figure out all the differences between these stupid MS products.

  Read the article

• How to change my commandline locale after CentOS decided to change it?

  - by Aron Rotteveel

  So apparently, CentOS decided I was Dutch, and thus, should not have a English locale. Apart from the fact that this greatly bothers me, I am having a pretty hard time actually changing it back. There does not seem to be a setlocale function, and system-config-language tells me I am using an English locale, even though my environment says otherwise. Any help would be appreciated. Output from locale: LANG=nl_NL.UTF-8 LC_CTYPE="nl_NL.UTF-8" LC_NUMERIC="nl_NL.UTF-8" LC_TIME="nl_NL.UTF-8" LC_COLLATE="nl_NL.UTF-8" LC_MONETARY="nl_NL.UTF-8" LC_MESSAGES="nl_NL.UTF-8" LC_PAPER="nl_NL.UTF-8" LC_NAME="nl_NL.UTF-8" LC_ADDRESS="nl_NL.UTF-8" LC_TELEPHONE="nl_NL.UTF-8" LC_MEASUREMENT="nl_NL.UTF-8" LC_IDENTIFICATION="nl_NL.UTF-8" LC_ALL= Both my ~/.bashrc as ~/.bash_profile contain no locale settings. Additionally, /etc/bashrc does not contain any locale references either.

  Read the article

• external video card for notebook?

  - by Fuxi

  hi, i'd like to hook an external monitor to my notebook as i need a higher resolution (1680x1050). my notebook supports that resolution (via analog vga out) but the quality is pretty awful - there are blurry horizontal shadows everywhere and tweaking didn't help - seems like the vga out's quality isn't good enough. so i was wondering - does it make sense looking for an external video card? can i also connect a dvi monitor via usb-video-card with optimal quality? my notebook also has pcmcia. any recommendations which i should buy? thx

  Read the article

• Can I make Puppet's module-to-file mapping to start searching at the top of the modules tree?

  - by John Siracusa

  Consider these two Puppet module files: # File modules/a/manifests/b/c.pp class a::b::c { include b::c } # File modules/b/manifests/c.pp class b::c { notify { "In b::c": } } It seems that when Puppet hits the include b::c directive in class a::b::c, it searches for the corresponding *.pp file by looking backwards from the current class and decides that it find the correct file located at ../../b/c.pp. In other words, it resolves b::c to the same *.pp file that the include b::c statement appears in: modules/a/manifests/b/c.pp I expected it (and would like it) to instead find and load the file modules/b/manifests/c.pp. Is there a way to make Puppet do this? If not, it seems to me that module names may not contain any other module names anywhere within them, which is a pretty surprising restriction.

  Read the article

• File corruption

  - by firesoul

  Recently, almost every file I try to copy into my HDDs gets corrupted. When writing to the disk, some portion of the file is replaced by random bytes (Checked using Diff apps) There's no problem reading existing files. I'm pretty sure it's not the HDD, becasue I've tried another HDD (a brand new 1TB WD) and the problem still remains. I have an AMD Athlon 64 X2 CPU, an ASUS M2NE motherboard, 2 WD SATA II HDDs (320GB + 1TB) and 3GB of Corsair RAM. My OS is Windows 7 (64 bit) Now, what could be the cause of this? If it's the motherboard, can it be fixed by using a PCI SATA card?

  Read the article

• Improve efficiency when using parallel to read from compressed stream

  - by Yoga

  Is another question extended from the previous one [1] I have a compressed file and stream them to feed into a python program, e.g. bzcat data.bz2 | parallel --no-notice -j16 --pipe python parse.py > result.txt The parse.py can read from stdin continusuoly and print to stdout My ec2 instance is 16 cores but from the top command it is showing 3 to 4 load average only. From the ps, I am seeing a lot of stuffs like.. sh -c 'dd bs=1 count=1 of=/tmp/7D_YxccfY7.chr 2>/dev/null'; I know I can improve using the -a in.txtto improve performance, but with my case I am streaming from bz2 (I cannot exact it since I don't have enought disk space) How to improve the efficiency for my case? [1] Gnu parallel not utilizing all the CPU

  Read the article

• My NTFS Partition keeps becoming "unusable" on Ubuntu, Any Ideas?

  - by gopherman

  I just purchased a new 2TB Drive External Seagate, My main system uses both Windows and Ubuntu So I am pretty much stuck with keeping my drive as NTFS. I have done this without any problems before but since I got this new drive I have been having issues. When I first load up Ubuntu the drive mounts and runs fine, after an unspecified amount of time i start getting Input/Output errors when accessing the drive. When I goto the Disk Utility I get a message stating the drive is "Unknown or Unused", If I disconnect and reconnect the drive or reboot everything is fine again. There's no errors coming up with S.M.A.R.T and it seems to work fine while under windows. Any thoughts?

  Read the article

• Subscript/Superscript Hotkey for Excel 2010 Macro?

  - by advs89

  Background In Excel 2010, for some ridiculous reason, there is no built-in hotkey (or even a button on the toolbar) for subscripting/superscripting text within a text cell. You can, however, highlight the text, right-click the selection, click format, and then check the [x] subscript or [x] superscript checkbox. Question Are there any kinds of excel macros or workarounds to map two keyboard hotkeys to the subscript and superscript keys, respectively? (It should only be, like, two lines of code - one for the event handler and one for the actual procedure call... I would write one myself but my VBA is rusty, at best, and I am pretty confident there is probably already some kind of solution, despite my inability to find one via search engine) Thanks for any help you can provide!

  Read the article

• Monitoring the wall time of a process on windows?

  - by Sean Madden

  Windows Task Manager has the ability to show the current CPU time of any given running process on windows, is there any way (not necessarily through Task Manager) to get the current wall time of a process? An example, let's say I have a script that reliably runs for about 45 minutes. Without adding a progress bar to the script, is there any way to figure out for how long it has been running? The math behind this seems pretty straight forward; WallTime = CurrentWallTime - WallTimeProcessStarted. Likewise, since the math is so simple, is there anyway to get the time that a process was started at?

  Read the article

• My NTFS Partition keeps becoming "unusable" on Ubuntu, Any Ideas?

  - by gopherman

  I just purchased a new 2TB Drive External Seagate, My main system uses both Windows and Ubuntu So I am pretty much stuck with keeping my drive as NTFS. I have done this without any problems before but since I got this new drive I have been having issues. When I first load up Ubuntu the drive mounts and runs fine, after an unspecified amount of time i start getting Input/Output errors when accessing the drive. When I goto the Disk Utility I get a message stating the drive is "Unknown or Unused", If I disconnect and reconnect the drive or reboot everything is fine again. There's no errors coming up with S.M.A.R.T and it seems to work fine while under windows. Any thoughts?

  Read the article

• How can I send raw postscript to a remote printer via CUPS?

  - by Ash

  I have an ancient fax device with a printer interface that only accepts postscript level 1 documents formatted in a specific way. I only have access to this printer over the lpd:// protocol. I have some old documents from our previous system that work fine on our Unix machines, but they are altered somehow by CUPS when I use lp on our Linux system. The PDF files that end up in the print queue are significantly modified versions of the original, and although they still render in ghostscript, they don't do anything on the printer. I'm wondering if there's a way to tell CUPS "don't process this, just send it to the printer without modification", or whether there's a lpd client or procedure I could try?

  Read the article

• Is it possible to have tab completion of drop-down lists in web pages in Firefox?

  - by Nick Booker

  Does anyone know of a Firefox plugin that would enable tab-completion (or some other key sequence like Alt-L) of items in drop-down lists in web forms? e.g. ou<TAB>in<TAB>s<TAB> for 'OurCompany - Internal Support' Vimperator's hints mode makes it very ergonomic to focus the drop-down list with a key sequence like f13 but the keyboard interface to the drop-down list still sucks. I very frequently have to pick items from a very long list with very long common prefixes among the entries (e.g. 30-40 starting with OurCompany -), which renders both the built-in keyboard interface and the mouse pretty slow and unergonomic. I basically want readline support for filling webforms!

  Read the article

• How to map command in vim that maintains mode when invoked?

  - by Phoenix

  I'm configuring vim in Mac OS X's Terminal app to do useful things with my arrow keys (among others). For example, I want option-left to move the cursor back one word, similarly to how it works in other Mac applications. In normal mode, this is easy enough; I can simply map the sequence to b. But when I'm in insert mode, I want to stay in insert mode (i.e., map the sequence to <c-o>b. In my .vimrc` file, I have these lines: nmap ^[[xol~ b imap ^[[xol~ <c-o>b Where ^[[xol~ is the character sequence that I've configured Terminal to send when I press option-left. This works, but it gets pretty tedious, especially when I've got nearly two dozen commands that I want to map. Is there a better way to do this?

  Read the article

• Windows 7 Won't find Lexmark X4550

  - by cameronoleav

  I just got Lexmark X4550 wireless printer and want to have it installed on my laptop Windows 7 Beta. I have installed using Lexmark drivers and doing a "add a printer" device search. But when I tried to print a document i got an error message: "Communication not available. The printer cannot communicate with the computer...". This pinter used to work perfectly on my Windows XP Pro SP3. Any help would be greatly appreciated.

  Read the article

• Do I need to reserve space before installing Ubuntu alongside Windows 7?

  - by CRM Junkie

  I had Windows 7 32 bit on my existing system, but I am planning to install Ubuntu alongside it. So, I just decided to do a fresh installation of both the operating systems. When I insert the Windows 7 DVD, I can create 3 partitions at maximum, with one being the one where Windows 7 will be installed. I just wanted to know – do I need to keep some un-partitioned space for Ubuntu to install? By "unpartitioned space" I mean the space left after creating 3 partitions for Windows 7. I have a 500 GB HDD, so the three partitions I would be creating are 120 GB, 120 GB and 120 GB. The rest is shown as some logical drive, is that unpartitioned space? Can I install Ubuntu over there? I am pretty sure the space shown as logical won't be available as drives when I log into Windows 7. Is that space lost or can I use that to install ubuntu?

  Read the article

• linux intrusion detection software

  - by Sam Hammamy

  I have an Ubuntu VPS that I use for practice and deploying prototypes as I am a python developer. I recently started teaching my self sys admin tasks, like installing OpenLDAP. I happened to turn off the ufw firewall for just a minute, and when I ran an netstat command, I saw a foreign ip connected to ssh that I traced to china. I'd like to know a few things: 1) Is there any good network intrusion detection software, such that if any IP that's outside a specific range connects to the VPN, I can be notified? -- I am thinking about scripting this, but I'm pretty sure there's something useful out there and I believe in the wisdom of crowds. 2) How did this person gain access to my server? Is it because my firewall was down? Or is it because they browsed my LDAP directory and from there figured out a way to connect (there was a clear text password in the tree but it wasn't one used by the server's sshd)?

  Read the article

• Cygwin creates files with special (shared) icons on windows

  - by barjonah

  I use cygwin to transfer files between linux and windows machines. Everytime I transfer a file to a windows machine it adds an extra shared user icon on the file's or folder's icon itself. This also happens if I create a file from cygwin on windows using pretty much any command: echo, vim, nano, cat. This is what the cygwin-created folders (and files) look like. This is what a normal folder (or file) looks like. I'm thinking it has to do with permission, because I'd have to chmod it everytime if I want other applications to access the files or folders on windows. How can I tell cygwin to create regular ol' files just like a user or any program would?

  Read the article

• Uninstalling PowerShell 1.0

  - by Ddono25

  I am attempting to standardize our PowerShell deployment and usage across all servers, which involves uninstalling PS1.0/installing PS2.0 on Server 2003 machines. In searching for KB926139 through CMD and Control Panel Add/Remove Programs, it is nowhere to be found. We have KB926141 installed on these servers as the Language Pack update, but no initial Install Update. PowerShell 1.0 is installed on the server and can be found at the default locations (%windir%\System32\WindowsPowerShell\V1.0, %windir%\Syswow64\WindowsPowerShell\V1.0). I would like to avoid deleting the Registry Entry in this situation since it should be pretty simple, any help would be appreciated. Thanks!

  Read the article

• Best way to use mod_rewrite to replace WordPress pages with static files

  - by David Moles

  Here's the situation: I've got an old WordPress installation that I'd like to archive as static files, but I'd also like to preserve old URLs. I've already created the static archive with wget and sorted out the filenames and links. Now I'd like to configure Apache to intercept requests for the old dynamic URL and replace them with the new static one, e.g.: http://www.example.org/log/?p=1234 or http://www.example.org/log/index.php?p=1234 should redirect to http://www.example.org/log/archives/1234.html I've tried adding the following to the VirtualHost config for example.org, but to no effect -- I just get the PHP page. RewriteCond %{REQUEST_URI} /log/ RewriteCond %{QUERY_STRING} p=([^&;]*) RewriteRule ^/$ http://%{SERVER_NAME}/log/archives/%1.html [R,L] I've enabled logging and I can see what look like other rules being applied, but not this one. None of my other guesses at match patterns for %{REQUEST_URI} seem to have any effect either (log, log/, log.*, even .*). I'm new to mod_rewrite and this is mostly cargo cult, so I'm pretty sure I've gotten it wrong. Anyone know what I should be doing here?

  Read the article

• How is it possible for SSD's drives to have such a good latency?

  - by tigrou

  First time i read some information about SSD's, i was surprised to learn they internally use NAND flash chips. This kind of memory is generally slow (low bandwidth) and have high latency while SSD's are just the opposite. But here is how it works : SSD drives increase their bandwidth by using several NAND flash chips in parallel. In other words, they do some data striping (aka RAID0) across several chips (done by the controller). What i don't understand is how SSD's drives have such a low latency, whereas they are using NAND chips? (or at least lot better than what a typical single NAND chip would do) EDIT: I think under-estimate NAND chip capabilities. USB drives, while powered by NAND's are mostly limited by USB protocol (which have a pretty high latency) and the USB controller. That explain their poor performance in some cases.

  Read the article

< Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >