Search Results

Search found 11221 results on 449 pages for 'pure virtual'.

Page 363/449 | < Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >

• Wireless Broadcom 4313 not working on Ubuntu 12.04

  - by user88568

  It seems a lot of people are having this problem, but none of the posted solutions have worked for me so far. My driver is installed and activated, I have tried removing and re-adding the network, and various other fixes. No networks were picked up on my first boot, the next day wireless worked fine, and since then it does not detect networks, and when I manually try to connect, it repeatedly asks for the password and does not connect. Here's my info: 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-00-a1-ff-ff-f3-70-f1 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac root@michelle-laptop:/home/michelle# ifconfig eth0 Link encap:Ethernet HWaddr 70:f1:a1:f3:ba:ab inet6 addr: fe80::72f1:a1ff:fef3:baab/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:29 TX packets:0 errors:30 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 eth1 Link encap:Ethernet HWaddr f0:4d:a2:53:83:7a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:104 errors:0 dropped:0 overruns:0 frame:0 TX packets:104 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8000 (8.0 KB) TX bytes:8000 (8.0 KB) root@michelle-laptop:/home/michelle# lsmod Module Size Used by dm_crypt 22528 0 snd_hda_codec_hdmi 31775 1 snd_hda_codec_realtek 174313 1 snd_hda_intel 32765 5 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event parport_pc 32114 0 ppdev 12849 0 binfmt_misc 17292 1 lib80211_crypt_tkip 17275 0 bnep 17830 2 rfcomm 38139 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq joydev 17393 0 wl 2646601 0 snd 62064 19 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd btusb 17912 0 bluetooth 158438 11 bnep,rfcomm,btusb uvcvideo 67203 0 videodev 86588 1 uvcvideo snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lib80211 14040 2 lib80211_crypt_tkip,wl intel_ips 17822 0 psmouse 72919 0 serio_raw 13027 0 mei 36570 0 dell_laptop 17767 0 dell_wmi 12601 0 dcdbas 14098 1 dell_laptop sparse_keymap 13658 1 dell_wmi mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41906 0 hid 77367 1 usbhid wmi 18744 1 dell_wmi i915 414817 3 atl1c 36718 0 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 root@michelle-laptop:/home/michelle# iwlist scan lo Interface doesn't support scanning. eth1 Interface doesn't support scanning. eth0 No scan results root@michelle-laptop:/home/michelle# rfkill list 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no Obviously I don't know what I'm doing. I'd appreciate any help! Thanks!

  Read the article

• Selectively Exposing Functionallity in .Net

  - by David V. Corbin

  Any developer should be aware of the principles of encapsulation, cross-tier isolation, and cross-functional separation of concerns. However, it seems the few take the time to consider the adage of "minimal yet complete"1 when developing the software. Consider the exposure of "business objects" to the user interface. Some common situations occur: Accessing a given element requires a compound set of calls that do not "make sense" to the User Interface. More information than absolutely required is exposed to the user interface It would be much cleaner if a custom interface was provided that exposed exactly (and only) the information that is required by the consumer. Achieving this using conventional techniques would require the creation (and maintenance!) of custom classes to filter and transpose the information into the ideal format. Determining the ROI on this approach can be very difficult to ascertain, and as a result it is often ignored completely. There is another approach, which is largely made practical by virtual of the Action and Func delegates. From a callers point of view, the following two samples can be used interchangeably:     interface ISomeInterface     {         void SampleMethod1(string param);         string SamepleMethod2(string param);     }       class ISomeInterface     {         public Action<string> SampleMethod1 {get; }         public Func<string,string> SamepleMethod2 {get; }     }   The capabilities this simple changes enable are significant (and remember it does not cange the syntax at the call site): The delegates can be initialized to directly call the proper method of any target class. The delegates can be dynamically updated based on the current state. The "interface" can NOT be cast to the concrete class (which often exposes more functionallity). This patterns By limiting the interface to the exact functionallity required, the reduced surface area will typically result in lower development, testing and maintenance costs. We are currently in the process of posting a project on CodePlex which illustrates this (and many other) techniques which have proven helpful in creating robust yet flexible solutions that are highly efficient2 and maintainable. This post will be updated as soon as the project is published. 1) Credit: Scott  Meyers, Effective C++, Addison-Wesley 1992 2) For those who read my previous post on performance it should be noted that the use of delegates is on the same order of magnitude (actually a tiny amount faster) as conventional interfaces.

  Read the article

• Becoming an Expert MySQL DBA Across Five Continents

  - by Antoinette O'Sullivan

  You can take Oracle's MySQL Database Administrator training on five contents. In this 5-day, live, instructor-led course, you learn to install and optimize the MySQL Server, set up replication and security, perform database backups and performance tuning, and protect MySQL databases. Below is a selection of the in-class events already on the schedule for the MySQL for Database Administrators course. AFRICA  Location  Date  Delivery Language  Nairobi, Kenya  22 July 2013  English  Johannesburg, South Africa  9 December 2013  English AMERICA  Location  Date  Delivery Language  Belmont, California, United States  22 July 2013  English ASIA  Location  Date  Delivery Language  Dehradun, India  11 July 2013  English  Grogol - Jakarta Barat, Indonesia  16 September 2013  English  Makati City, Philippines  5 August 2013  English  Pasig City, Philippines  12 August 2013  English  Istanbul, Turkey  12 August 2013  Turkish AUSTRALIA and OCEANIA  Location  Date  Delivery Language  Sydney, Australia  15 July 2013  English  Auckland, New Zealand  5 August 2013  English  Wellington, New Zealand  15 July 2013  English EUROPE  Location  Date  Delivery Language  London, England  9 September 2013  English  Aix-en-Provence, France  2 December 2013  French  Bordeaux Merignac, France  2 December 2013  French  Puteaux, France  16 September 2013  French  Dresden, Germany  26 August 2013  German  Hamburg, Germany  16 November 2013  German  Munich, Germany  19 August 2013  German  Munster, Germany  9 September 2013  German  Budapest, Hungary  4 November 2013  Hungarian  Belfast, Ireland  16 December 2013  English  Milan, Italy  7 October 2013  Italian  Rome, Italy  16 September 2013  Italian  Utrecht, Netherlands  16 September 2013  English  Warsaw, Poland 5 August 2013  Polish   Lisbon, Portugal  16 September 2013 European Portugese   Barcelona, Spain 30 October 2013  Spanish   Madrid, Spain 4 November 2013  Spanish   Bern, Switzerland  27 November 2013  German  Zurich, Switzerland  27 November 2013  German You can also take this course from your own desk as a live-virtual class, choosing from a wide selection of events already on the schedule suiting different timezones. To register for this course or to learn more about the authentic MySQL curriculum, go to http://oracle.com/education/mysql.

  Read the article

• LDoms and Maintenance Mode

  - by Owen Allen

   I got a few questions about how maintenance mode works with LDoms. "I have a Control Domain that I need to do maintenance on. What does being put in maintenance mode actually do for a Control Domain?" Maintenance mode is what you use when you're going to be shutting a system down, or otherwise tinkering with it, and you don't want Ops Center to generate incidents and notification of incidents. Maintenance mode stops new incidents from being generated, but it doesn't stop polling, or monitoring, the system and it doesn't prevent alerts. "What does maintenance mode do with the guests on a Control Domain?" If you have auto recovery set and the Control Domain is a member of a server pool of eligible systems, putting the Control Domain in maintenance mode automatically migrates guests to an available Control Domain.  When a Control Domain is in maintenance mode, it is not eligible to receive guests and the placement policies for guest creation and for automatic recovery won't select this server as a possible destination. If there isn't a server pool or there aren't any eligible systems in the pool, the guests are shut down. You can select a logical domain from the Assets section to view the Dashboard for the virtual machine and the Automatic Recovery status, either Enabled or Disabled. To change the status, click the action in the Actions pane. "If I have to do maintenance on a system and I do not want to initiate auto-recovery, what do I have to do so that I can manually bring down the Control Domain (and all its Guest domains)?" Use the Disable Automatic Recovery action. "If I put a Control Domain into maintenance mode, does that also put the OS into maintenance mode?" No, just the Control Domain server. You have to put the OS into maintenance mode separately. "Also, is there an easy way to see what assets are in maintenance mode? Can we put assets into, or take them out of, maintenance mode on some sort of group level?" You can create a user-defined group that will automatically include assets in maintenance mode. The docs here explain how to set up these groups. You'll use a group rule that looks like this:

  Read the article

• Retrieving Custom Attributes Using Reflection

  - by Scott Dorman

  The .NET Framework allows you to easily add metadata to your classes by using attributes. These attributes can be ones that the .NET Framework already provides, of which there are over 300, or you can create your own. Using reflection, the ways to retrieve the custom attributes of a type are: System.Reflection.MemberInfo public abstract object[] GetCustomAttributes(bool inherit); public abstract object[] GetCustomAttributes(Type attributeType, bool inherit); public abstract bool IsDefined(Type attributeType, bool inherit); System.Attribute public static Attribute[] GetCustomAttributes(MemberInfo member, bool inherit); public static bool IsDefined(MemberInfo element, Type attributeType, bool inherit); If you take the following simple class hierarchy: public abstract class BaseClass { private bool result;   [DefaultValue(false)] public virtual bool SimpleProperty { get { return this.result; } set { this.result = value; } } }   public class DerivedClass : BaseClass { public override bool SimpleProperty { get { return true; } set { base.SimpleProperty = value; } } } Given a PropertyInfo object (which is derived from MemberInfo, and represents a propery in reflection), you might expect that these methods would return the same result. Unfortunately, that isn’t the case. The MemberInfo methods strictly reflect the metadata definitions, ignoring the inherit parameter and not searching the inheritance chain when used with a PropertyInfo, EventInfo, or ParameterInfo object. It also returns all custom attribute instances, including those that don’t inherit from System.Attribute. The Attribute methods are closer to the implied behavior of the language (and probably closer to what you would naturally expect). They do respect the inherit parameter for PropertyInfo, EventInfo, and ParameterInfo objects and search the implied inheritance chain defined by the associated methods (in this case, the property accessors). These methods also only return custom attributes that inherit from System.Attribute. This is a fairly subtle difference that can produce very unexpected results if you aren’t careful. For example, to retrieve the custom  attributes defined on SimpleProperty, you could use code similar to this: PropertyInfo info = typeof(DerivedClass).GetProperty("SimpleProperty"); var attributeList1 = info.GetCustomAttributes(typeof(DefaultValueAttribute), true)); var attributeList2 = Attribute.GetCustomAttributes(info, typeof(DefaultValueAttribute), true));   The attributeList1 array will be empty while the attributeList2 array will contain the attribute instance, as expected. Technorati Tags: Reflection,Custom Attributes,PropertyInfo

  Read the article

• asus n550jv audio problem: no sound from notebook' speakers

  - by skywalker

  Ubuntu 13.10. The problem is: the internal speakers don't work. I have no problem when I'm using the headphones. There is no hardware issue since in windows 8 everything works perfectly(external subwoofer included). I'm trying to modify /etc/modprobe.d/alsa-base.conf but I can't find the correct model to put into: options snd-hda-intel model= The file HD-Audio-Models.txt doesn't contain the model for ALC668. Some info: :~sudo aplay -l **** List of PLAYBACK Hardware Devices **** card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC668 Analog [ALC668 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 :~$ sudo lspci -v | grep -A7 -i "audio" 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) Subsystem: Intel Corporation Device 2010 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f7a14000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Kernel driver in use: snd_hda_intel -- 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04) Subsystem: ASUSTeK Computer Inc. Device 11cd Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f7a10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel PS info :~$ amixer -c 0 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] :~$ pacmd dump-volumes Welcome to PulseAudio! Use "help" for usage information. Sink 0: reference = 0: 76% 1: 76%, real = 0: 76% 1: 76%, soft = 0: 100% 1: 100%, current_hw = 0: 76% 1: 76%, save = yes Input 8: volume = 0: 100% 1: 100%, reference_ratio = 0: 100% 1: 100%, real_ratio = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, volume_factor = 0: 100% 1: 100%, volume_factor_sink = 0: 100% 1: 100%, save = no Source 0: reference = 0: 100% 1: 100%, real = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, current_hw = 0: 100% 1: 100%, save = no Source 1: reference = 0: 16% 1: 16%, real = 0: 16% 1: 16%, soft = 0: 100% 1: 100%, current_hw = 0: 16% 1: 16%, save = yes

  Read the article

• Create Outlook Appointments from PowerShell

  - by BuckWoody

  I've been toying around with a script to create a special set of calendar objects in Outlook that show when my SQL Server Agent Jobs are scheduled to run. I haven't finished yet, but I thought I would share the part that creates the Outlook Appointments.I have yet to fill a variable with the start and end times, and then loop through that to create the appointments. I'm thinking I'll make the script below into a function, and feed it those variables in a loop. The script below creates a whole new Calendar Folder in Outlook called "SQL Server Agent Jobs". I also use categories quite a bit, so you'll see that too. Caution: If you plan to play with this script, do it on an isolated workstation, not on your "regular" Outlook calendar. Otherwise, you'll have lots of appointments in there that you don't care about!  # Add a new calendar item to a new Outlook folder called "SQL Server Agent Jobs" $outlook = new-object -com Outlook.Application $calendar = $outlook.Session.folders.Item(1).Folders.Item("SQL Server Agent Jobs") $appt = $calendar.Items.Add(1) # == olAppointmentItem $appt.Start = [datetime]"03/11/2010 11:00" $appt.End = [datetime]"03/11/2009 12:00" $appt.Subject = "JobName" $appt.Location = "ServerName" $appt.Body = "Job Details" $appt.Categories = "SQL server Agent Job" $appt.Save()   Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately.   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• links for 2011-03-17

  - by Bob Rhubart

  Siba Prasad: Oracle Database on Amazon RDSg Siba Prasad share an analysis of the pros and cons. (tags: oracle database cloud amazon) LIVE WEBCAST March 24 2pm PT- Why Switch from Red Hat and SUSE Linux to Oracle Linux? (Oracle's Linux Blog) Featuring Oracle's Monica Kumar, Sr.Director of Linux, Oracle VM and MySQL and Avi Miller, Principal Sales Consultant, Linux and Virtualization. (tags: oracle linux) Webcast: IBM SOA vs. Oracle SOA, March 24, 1pm ET / 10am PT Maneesh Joshi and Bruce Tierney guide you to a solid understanding of the differences between the Oracle and IBM approach to comprehensive SOA. (tags: oracle soa bpm) Finding the Right Solution to Source and Manage Your Contractors (PeopleSoft Apps Strategy) "Talent has become a primary competitive advantage for most organizations. Contingent labor offers talent on flexible terms; it offers the ability to scale up operations, close skill gaps, and manage risk in the process of delivering services." - Mark Rosenberg (tags: oracle peoplesoft enterprisearchitecture) Oracle Business Intelligence Customers: Have Your Voice Heard in the "2011Wisdom of the Crowds Business Intelligence Market Survey" (BI & Analytics Pulse) "The Wisdom of the Crowds survey combines social media, crowd sourcing, and good old fashioned market research to provide vendors and customers alike an unvarnished and insightful snap shot of what's top of mind with business intelligence professionals." (tags: oracle businessintelligence) Martin Bach: Troubleshooting Grid Infrastructure startup Martin Bach hunts down the problem that caused one of his blades to reboot after an EXT3 journal error. (tags: oracle grid rac) Oracle WebCenter: Social Networking & Collaboration (Oracle Enterprise 2.0 Blog) Kelley Ruppel with information on "how the new release of Oracle WebCenter provides unprecedented Social Networking and Collaboration." (tags: oracle webcenter enterprise2.0 collaboration) VirtaThon: 100% Virtual Java/Oracle/MySQL Conference! | Bex Huff "The goal is simple," says Oracle ACE Director Bex Huff. "Because it's all online, the conference is very cheap. Pricing is not yet announced... but it should be around $300. Also, unlike other conferences, every speaker gets paid a small fee depending on the popularity of his or her session." (tags: oracle oracleace java mysqql) Griffiths Waite Blog: BPM 11g PS3 GW's Ian Heathcock shares a link to "a most interesting article on Oracle's recent release discussing the new features and how PS3 adds value  to the whole SOA message." (tags: oracle soa) The Buttso Blathers: Tutorial: JSF 2.0 and JPA 2.0 with WebLogic Server using NetBeans Should you take application architecture advice from a man named Buttso? In this case, yes. (tags: oracle jsf jpa weblogic) Setting-up a High Available Tuned SOA Environment Middleware Magic (tags: ping.fm) How to Configure Weblogic Messaging Bridge with JBoss Middleware Magic (tags: ping.fm Weblogic JBoss) Richard Veryard on Architecture: Emergent Architecture (tags: ping.fm entarch emergence)

  Read the article

• VirtualBox image SOA Suite &amp; BPM Suite 11.1.1.6.0 & Your feedback?

  - by JuergenKress

  The integration PM team is very pleased to announce the release of a new version of our pre-configured SOA/BPM VirtualBox image for testing and evaluation. This VirtualBox appliance contains a fully configured, ready-to-use SOA/BPM/Webcenter 11.1.1.6.0 installation. All you need is to install Oracle VM VirtualBox on your desktop/laptop and import the SOA/BPM appliance and you are ready to try out SOA Suite and BPM Suite -- no installation and configuration required! The following software is installed in this VritualBox image: Oracle Enterprise Linux (64-bit) EL 5 Update 5 Oracle XE Database 11.2.0 Oracle SOA Suite 11.1.1.6.0 (includes Service Bus) Oracle BPM Suite 11.1.1.6.0 Oracle Webcenter Content (Enterprise Content Management) 11.1.1.6.0 Oracle Webcenter Suite 11.1.1.6.0 Oracle JDeveloper 11.1.1.6.0 JRockit R28.2.0-79-146777-1.6.0_29s Sun Java SDK 1.6.0_29-b11 If you want to try it out, please go to the Pre-built Virtual Machine for SOA Suite and BPM Suite 11g OTN page for detailed instructions on downloading and importing the VirtualBox image. Jon Petter Hjulstad published the first impression at his blog Twitter & LinkedIn We have been waiting for the new VirtualBox Image for a long time, and finally it is here. The appliance has improved in many ways since last release, so it has been worth waiting for. Both the appliance itself and the documentation is excellent. It is evident that Oracle has listened to feedback on the previous release, and I think the developer VMs are useful. Especially the adoption of new patchsets and versions (ex when 12c will be available) will gain a lot from quick getting hands-on experiences. This VirtualBox appliance is a multipurpose image which can be used in different domain configurations. The image has a number of pre-configured domains that you can use depending on your need. The image can be set up so that it requires use of as few resources as possible, you can for instance easily disable B2B if you do not need it, or you can shut down the desktop console and save 600MB. It is important to say that this image is not for production purposes. Read the full article SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix ForumTechnorati Tags: SOA Suite Image,VirtualBox,BPM suite Image,SOA Specialization award,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

  Read the article

• KVM Bridged Network Not Working

  - by EApubs

  I just installed KVM on my Ubuntu Server according to this guide : https://help.ubuntu.com/community/KVM/Installation Then prepared a bridged network as shown in here : https://help.ubuntu.com/community/KVM/Networking Then, I created a virtual machine with virt-manager. I tried several times but the guest fails to connect to the network! Any help? ifconfig : br0 Link encap:Ethernet HWaddr d0:27:88:b0:e4:38 inet addr:192.168.20.100 Bcast:192.168.20.255 Mask:255.255.255.0 inet6 addr: fe80::d227:88ff:feb0:e438/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:62 errors:0 dropped:0 overruns:0 frame:0 TX packets:62 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:10493 (10.4 KB) TX bytes:8433 (8.4 KB) eth0 Link encap:Ethernet HWaddr d0:27:88:b0:e4:38 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:62 errors:0 dropped:0 overruns:0 frame:0 TX packets:63 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11361 (11.3 KB) TX bytes:8479 (8.4 KB) Interrupt:41 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) virbr0 Link encap:Ethernet HWaddr 5a:8c:57:95:af:3b inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) brctl show : bridge name bridge id STP enabled interfaces br0 8000.d02788b0e438 no eth0 virbr0 8000.000000000000 yes brctl showmacs br0 : port no mac addr is local? ageing timer 1 5c:d9:98:67:b6:28 no 48.33 1 d0:27:88:b0:e4:38 yes 0.00 1 e0:2a:82:f9:6c:09 no 0.00 ip route : default via 192.168.20.1 dev br0 metric 100 192.168.20.0/24 dev br0 proto kernel scope link src 192.168.20.100 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 *In the guest * I was unable to copy paste the info from the guest because can't ssh to it. It didn't get any ip from DHCP. Won't work even after setting it up manually.

  Read the article

• CodePlex Daily Summary for Thursday, September 06, 2012

  CodePlex Daily Summary for Thursday, September 06, 2012Popular Releasesmenu4web: menu4web 0.4.1 - javascript menu for web sites: This release is for those who believe that global variables are evil. menu4web has been wrapped into m4w singleton object. Added "Vertical Tabs" example which illustrates object notation.WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.1: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...iPDC - Free Phasor Data Concentrator: iPDC-v1.3.1: iPDC suite version-1.3.1, Modifications and Bug Fixed (from v 1.3.0) New User Manual for iPDC-v1.3.1 available on websites. Bug resolved : PMU Simulator TCP connection error and hang connection for client (PDC). Now PMU Simulator (server) can communicate more than one PDCs (clients) over TCP and UDP parallely. PMU Simulator is now sending the exact data frames as mentioned in data rate by user. PMU Simulator data rate has been verified by iPDC database entries and PMU Connection Tes...Microsoft SQL Server Product Samples: Database: AdventureWorks OData Feed: The AdventureWorks OData service exposes resources based on specific SQL views. The SQL views are a limited subset of the AdventureWorks database that results in several consuming scenarios: CompanySales Documents ManufacturingInstructions ProductCatalog TerritorySalesDrilldown WorkOrderRouting How to install the sample You can consume the AdventureWorks OData feed from http://services.odata.org/AdventureWorksV3/AdventureWorks.svc. You can also consume the AdventureWorks OData fe...Desktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)DotNetNuke® Community Edition CMS: 06.02.03: Major Highlights Fixed issue where mailto: links were not working when sending bulk email Fixed issue where uses did not see friendship relationships Problem is in 6.2, which does not show in the Versions Affected list above. Fixed the issue with cascade deletes in comments in CoreMessaging_Notification Fixed UI issue when using a date fields as a required profile property during user registration Fixed error when running the product in debug mode Fixed visibility issue when...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.65: Fixed null-reference error in the build task constructor.Active Forums for DotNetNuke CMS: Active Forums 5.0.0 RC: RC release of Active Forums 5.0.Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...BI System Monitor: v2.1: Data Audits report and supporting SQL, and SSIS package Environment Overview report enhancements, improving the appearance, addition of data audit finding indicators Note: SQL 2012 version coming soon.Hidden Capture (HC): Hidden Capture 1.1: Hidden Capture 1.1 by Mohsen E.Dawatgar http://Hidden-Capture.blogfa.comExt Spec: Ext Spec 0.2.1: Refined examples and improved distribution options.The Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.DotNetNuke® Form and List: 06.00.04: DotNetNuke Form and List 06.00.04 Don't forget to backup your installation before upgrade. Changes in 06.00.04 Fix: Sql Scripts for 6.003 missed object qualifiers within stored procedures Fix: added missing resource "cmdCancel.Text" in form.ascx.resx Changes in 06.00.03 Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 Change: Data is now stored in nvarchar(max) instead of ntext Changes in 06.00.02 The scripts are now compatible with SQL Azure, tested in a ne...Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.New ProjectsAny-Service: AnyService is a .net 4.0 Windows service shell. It hosts any windows application in non-gui mode to run as a service.BabyCloudDrives - the multi cloud drive desktop's application: wpf ????BLACK ORANGE: Download The HPAD TEXT EDITOR and use it Wisely.. CodePlex New Release Checker: CodePlex New Release Checker is a small library that makes it easy to add, "New Version Available!" functionality to your CodePlex project.Collect: ????????！CSVManager: CSV??CSV?????，????CSV??，??????Exam Project: My Exam Project. Computer Vision, C and OpenCV-FTP: Hey guys thanks for checking out my ftp!Haushaltsbuch: 1ModMaker.Lua: ModMaker.Lua is an open source .NET library that parses and executes Lua code.MyJabbr: MyJabbr netduinoscope: Design shield and software to use netduino as oscilloscopeNetSurveillance Web Application: Net Surveillance Web ApplicationNiconicoApiHelper: ????API?????????OStega: A simple library for encrypt text into an bmp or png image.OURORM: ormTFS Cloud Deployment Toolkit: The TFS Cloud Deployment Toolkit is a set of tools that integrate with TFS 2010 to help manage configuration and deployment to various remote environments.The Visual Guide for Building Team Foundation Server 2012 Environments: A step-by-step guide for building Team Foundation Server 2012 environments that include SharePoint Server 2010, SQL Server 2012, Windows Server 2012 and more!WinRT LineChart: An attempt at creating an usable LineChart for everyone to use in his/her own Windows 8 Apps

  Read the article

• The value of money

  - by ambreesh

  A dictionary definition of money is "any circulating medium of exchange, including coins, paper money, anddemand deposits". If you ask an economist for a definition of money, you will be introduced to terms like M1, M2, M3, all of which denote tangible assets - currency, and anything that is liquid enough to be used as currency; checks, stamps and now mobile minutes being examples. The macroeconomic theory of money is fascinating - the effect of money supply on exchange rates and interest rates, the concept of the "money multiplier" (if I deposit $10 into a bank, the bank will likely loan $8 of it to someone else, who will then give it to someone else in exchange for goods and services, who will then likely deposit it again, which will result in the bank loaning it again and so on - making that $10 of money supply worth a lot more ($10+$8+$x+...)).  But all this depends on money supply - in other words, money that is printed by the mint. The Treasury Department spends a lot of time figuring out how much money to print, there is lot being written on QE2 now-a-days, which is intended to increase the money supply. Money is used to purchase goods and services, and yes it is saved too but that is so one can purchase goods and services later. Completely unrelated, there is a sea change occurring in the web world, dominated by, I believe, Facebook. With 500M active users and growing, FB has the ability to introduce a "money supply" which is completely unrelated to today's "money". Using today's money, a FB user can buy a certain number of FB$s, and then use the FB$s within FB to purchase goods and services - with the money multiplier kicking in. I remember talking with a colleague about this a few years ago, the true way to monetize the web is to introduce an alternative system to the existing, and FB has the ability to do just that. There is enough momentum, enough mass for FB to start to monetize its user base. And completely screw up the economists at the Treasury, not to mention disintermediating the banks completely. The only other ubiquitous asset is mobile minutes. People exchanging mobile minutes for tangible goods and services happens today, the big difference however is the demographic. While Safaricom offers this ability in Kenya today, FB has the 15-40 year middle class user as their user. And the next generation is growing up with FB as a standard channel for communicating with their peers. Virtual flowers when going in for the kill? If your target is an avid FB user, why not? It certainly is a lot more green - no pun intended!

  Read the article

• SCVMM – Round 2 – How to create a Private Cloud using PowerShell

  - by Waclaw Chrabaszcz

  Originally posted on: http://geekswithblogs.net/Wchrabaszcz/archive/2013/06/28/scvmm--round-2--how-to-create-a-private.aspxHave you ever seen "A Bridge too far" movie? To not to wake up a click too far, it is good to script some tasks. Yes of course we can follow wizards, but some of us want to be warriorsJ. A small tip, take a look on credentials and system GUID examples. I don't know how about you, but for me it will be really useful in the future.    # credents$credential = Get-CredentialNew-SCRunAsAccount -Name "TESTDOMAIN\Administrator" -Credential $credential #storage $opsMgrServerCredential = Get-SCRunAsAccount -Name "TESTDOMAIN\Administrator"New-SCStorageClassification -Name "Bronze" -Description "" –RunAsynchronouslyNew-SCStorageClassification -Name "Silver" -Description "" –RunAsynchronouslyNew-SCStorageClassification -Name "Gold" -Description "" –RunAsynchronously # add a shared storageFind-SCComputer -ComputerName "dc.TESTDOMAIN.net"Add-SCStorageProvider -AddWindowsNativeWmiProvider -Name "dc.TESTDOMAIN.net" -RunAsAccount $opsMgrServerCredential -ComputerName "dc.TESTDOMAIN.net"$fileServer = Get-SCStorageFileServer "dc.TESTDOMAIN.net"$fileShares = @()$fileShares += Get-SCStorageFileShare -Name "VMMLibrary"Set-SCStorageFileServer -StorageFileServer $fileServer -AddStorageFileShareToManagement $fileShares –RunAsynchronously #fabric network$logicalNetwork = New-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network" -LogicalNetworkDefinitionIsolation $false -EnableNetworkVirtualization $true -UseGRE $true -IsPVLAN $false$allHostGroups = @()$allHostGroups += Get-SCVMHostGroup -Name "All Hosts"$allSubnetVlan = @()$allSubnetVlan += New-SCSubnetVLan -Subnet "10.0.0.0/24" -VLanID 0New-SCLogicalNetworkDefinition -Name "TESTDOMAIN-Service-Network_0" -LogicalNetwork $logicalNetwork -VMHostGroup $allHostGroups -SubnetVLan $allSubnetVlan #IP pool$logicalNetwork = Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network"$logicalNetworkDefinition = Get-SCLogicalNetworkDefinition -LogicalNetwork $logicalNetwork -Name "TESTDOMAIN-Service-Network_0" # Gateways$allGateways = @()$allGateways += New-SCDefaultGateway -IPAddress "10.0.0.1" –Automatic# DNS servers $allDnsServer = @("10.0.0.1")# DNS suffixes$allDnsSuffixes = @("TESTDOMAIN.net")# WINS servers$allWinsServers = @()New-SCStaticIPAddressPool -Name "TESTDOMAIN-Service-Network" -LogicalNetworkDefinition $logicalNetworkDefinition -Subnet "10.0.0.0/24" -IPAddressRangeStart "10.0.0.51" -IPAddressRangeEnd "10.0.0.75" -DefaultGateway $allGateways -DNSServer $allDnsServer -DNSSuffix "" -DNSSearchSuffix $allDnsSuffixes –RunAsynchronously #Hyper-V Virtual Networks$logicalNetwork = Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network" $vmNetwork = New-SCVMNetwork -Name "TESTDOMAIN-VMN" -LogicalNetwork $logicalNetwork -IsolationType "WindowsNetworkVirtualization" -CAIPAddressPoolType "IPV4" -PAIPAddressPoolType "IPV4"Write-Output $vmNetwork$subnet = New-SCSubnetVLan -Subnet "10.0.0.0/24"New-SCVMSubnet -Name "Con-SN" -VMNetwork $vmNetwork -SubnetVLan $subnet # bind VLAN with the Network Adapter$vmHost = Get-SCVMHost -ComputerName "VMM01.TESTDOMAIN.net"$vmHostNetworkAdapter = Get-SCVMHostNetworkAdapter -VMHost $vmHost #-Name "Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)"Set-SCVMHostNetworkAdapter -VMHostNetworkAdapter $vmHostNetworkAdapter -Description "" -AvailableForPlacement $true -UsedForManagement $true $logicalNetwork = Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network" Set-SCVMHostNetworkAdapter -VMHostNetworkAdapter $vmHostNetworkAdapter -AddOrSetLogicalNetwork $logicalNetworkSet-SCVMHost -VMHost $vmHost -RunAsynchronously -NumaSpanningEnabled $true #Create a Private Cloud$Guid = [System.Guid]::NewGuid()Set-SCCloudCapacity -JobGroup $Guid -UseCustomQuotaCountMaximum $false -UseMemoryMBMaximum $false -UseCPUCountMaximum $false -UseStorageGBMaximum $false -UseVMCountMaximum $false -CustomQuotaCount 10 -MemoryMB 10240 -CPUCount 10 -StorageGB 386 -VMCount 10$resources = @()$resources += Get-SCLogicalNetwork -Name "TESTDOMAIN-Service-Network"$resources += Get-SCLoadBalancer -Manufacturer "Microsoft"$readonlyLibraryShares = @()$readonlyLibraryShares += Get-SCLibraryShare | where { $_.LibraryServer.Name -eq "dc.TESTDOMAIN.net" -and $_.Name -eq "VMMLibrary" }$addCapabilityProfiles = @()$addCapabilityProfiles += Get-SCCapabilityProfile -Name "Hyper-V"$Guid2 = [System.Guid]::NewGuid()Set-SCCloud -JobGroup $Guid2 -RunAsynchronously -AddCloudResource $resources -AddReadOnlyLibraryShare $readonlyLibraryShares -AddCapabilityProfile $addCapabilityProfiles$hostGroups = @()$hostGroups += Get-SCVMHostGroup -Name "TESTDOMAIN"New-SCCloud -VMHostGroup $hostGroups -Name "TESTDOMAIN-Cloud" -Description "" –RunAsynchronously

  Read the article

• Book Review: Brownfield Application Development in .NET

  - by DotNetBlues

  I recently finished reading the book Brownfield Application Development in .NET by Kyle Baley and Donald Belcham.  The book is available from Manning.  First off, let me say that I'm a huge fan of Manning as a publisher.  I've found their books to be top-quality, over all.  As a Kindle owner, I also appreciate getting an ebook copy along with the dead tree copy.  I find ebooks to be much more convenient to read, but hard-copies are easier to reference. The book covers, surprisingly enough, working with brownfield applications.  Which is well and good, if that term has meaning to you.  It didn't for me.  Without retreading a chunk of the first chapter, the authors break code bases into three broad categories: greenfield, brownfield, and legacy.  Greenfield is, essentially, new development that hasn't had time to rust and is (hopefully) being approached with some discipline.  Legacy applications are those that are more or less stable and functional, that do not expect to see a lot of work done to them, and are more likely to be replaced than reworked. Brownfield code is the gray (brown?) area between the two and the authors argue, quite effectively, that it is the most likely state for an application to be in.  Brownfield code has, in some way, been allowed to tarnish around the edges and can be difficult to work with.  Although I hadn't realized it, most of the code I've worked on has been brownfield.  Sometimes, there's talk of scrapping and starting over.  Sometimes, the team dismisses increased discipline as ivory tower nonsense.  And, sometimes, I've been the ignorant culprit vexing my future self. The book is broken into two major sections, plus an introduction chapter and an appendix.  The first section covers what the authors refer to as "The Ecosystem" which consists of version control, build and integration, testing, metrics, and defect management.  The second section is on actually writing code for brownfield applications and discusses object-oriented principles, architecture, external dependencies, and, of course, how to deal with these when coming into an existing code base. The ecosystem section is just shy of 140 pages long and brings some real meat to the matter.  The focus on "pain points" immediately sets the tone as problem-solution, rather than academic.  The authors also approach some of the topics from a different angle than some essays I've read on similar topics.  For example, the chapter on automated testing is on just that -- automated testing.  It's all well and good to criticize a project as conflating integration tests with unit tests, but it really doesn't make anyone's life better.  The discussion on testing is more focused on the "right" level of testing for existing projects.  Sometimes, an integration test is the best you can do without gutting a section of functional code.  Even if you can sell other developers and/or management on doing so, it doesn't actually provide benefit to your customers to rewrite code that works.  This isn't to say the authors encourage sloppy coding.  Far from it.  Just that they point out the wisdom of ignoring the sleeping bear until after you deal with the snarling wolf. The other sections take a similarly real-world, workable approach to the pain points they address.  As the section moves from technical solutions like version control and continuous integration (CI) to the softer, process issues of metrics and defect tracking, the authors begin to gently suggest moving toward a zero defect count.  While that really sounds like an unreasonable goal for a lot of ongoing projects, it's quite apparent that the authors have first-hand experience with taming some gruesome projects.  The suggestions are grounded and workable, and the difficulty of some situations is explicitly acknowledged. I have to admit that I started getting bored by the end of the ecosystem section.  No matter how valuable I think a good project manager or business analyst is to a successful ALM, at the end of the day, I'm a gear-head.  Also, while I agreed with a lot of the ecosystem ideas, in theory, I didn't necessarily feel that a lot of the single-developer projects that I'm often involved in really needed that level of rigor.  It's only after reading the sidebars and commentary in the coding section that I had the context for the arguments made in favor of a strong ecosystem supporting the development process.  That isn't to say that I didn't support good product management -- indeed, I've probably pushed too hard, on occasion, for a strong ALM outside of just development.  This book gave me deeper insight into why some corners shouldn't be cut and how damaging certain sins of omission can be. The code section, though, kept me engaged for its entirety.  Many technical books can be used as reference material from day one.  The authors were clear, however, that this book is not one of these.  The first chapter of the section (chapter seven, over all) addresses object oriented (OO) practices.  I've read any number of definitions, discussions, and treatises on OO.  None of the chapter was new to me, but it was a good review, and I'm of the opinion that it's good to review the foundations of what you do, from time to time, so I didn't mind. The remainder of the book is really just about how to apply OOP to existing code -- and, just because all your code exists in classes does not mean that it's object oriented.  That topic has the potential to be extremely condescending, but the authors miraculously managed to never once make me feel like a dolt or that they were wagging their finger at me for my prior sins.  Instead, they continue the "pain points" and problem-solution presentation to give concrete examples of how to apply some pretty academic-sounding ideas.  That's a point worth emphasizing, as my experience with most OO discussions is that they stay in the academic realm.  This book gives some very, very good explanations of why things like the Liskov Substitution Principle exist and why a corporate programmer should even care.  Even if you know, with absolute certainty, that you'll never have to work on an existing code-base, I would recommend this book just for the clarity it provides on OOP. This book goes beyond just theory, or even real-world application.  It presents some methods for fixing problems that any developer can, and probably will, encounter in the wild.  First, the authors address refactoring application layers and internal dependencies.  Then, they take you through those layers from the UI to the data access layer and external dependencies.  Finally, they come full circle to tie it all back to the overall process.  By the time the book is done, you're left with a lot of ideas, but also a reasonable plan to begin to improve an existing project structure. Throughout the book, it's apparent that the authors have their own preferred methodology (TDD and domain-driven design), as well as some preferred tools.  The "Our .NET Toolbox" is something of a neon sign pointing to that latter point.  They do not beat the reader over the head with anything resembling a "One True Way" mentality.  Even for the most emphatic points, the tone is quite congenial and helpful.  With some of the near-theological divides that exist within the tech community, I found this to be one of the more remarkable characteristics of the book.  Although the authors favor tools that might be considered Alt.NET, there is no reason the advice and techniques given couldn't be quite successful in a pure Microsoft shop with Team Foundation Server.  For that matter, even though the book specifically addresses .NET, it could be applied to a Java and Oracle shop, as well.

  Read the article

• Developing Schema Compare for Oracle (Part 1)

  - by Simon Cooper

  SQL Compare is one of Red Gate's most successful SQL Server tools; it allows developers and DBAs to compare and synchronize the contents of their databases. Although similar tools exist for Oracle, they are quite noticeably lacking in the usability and stability that SQL Compare is known for in the SQL Server world. We could see a real need for a usable schema comparison tools for Oracle, and so the Schema Compare for Oracle project was born. Over the next few weeks, as we come up to release of v1, I'll be doing a series of posts on the development of Schema Compare for Oracle. For the first post, I thought I would start with the main pitfalls that we stumbled across when developing the product, especially from a SQL Server background. 1. Schemas and Databases The most obvious difference is that the concept of a 'database' is quite different between Oracle and SQL Server. On SQL Server, one server instance has multiple databases, each with separate schemas. There is typically little communication between separate databases, and most databases are no more than about 1000-2000 objects. This means SQL Compare can register an entire database in a reasonable amount of time, and cross-database dependencies probably won't be an issue. It is a quite different scene under Oracle, however. The terms 'database' and 'instance' are used interchangeably, (although technically 'database' refers to the datafiles on disk, and 'instance' the running Oracle process that reads & writes to the database), and a database is a single conceptual entity. This immediately presents problems, as it is infeasible to register an entire database as we do in SQL Compare; in my Oracle install, using the standard recommended options, there are 63975 system objects. If we tried to register all those, not only would it take hours, but the client would probably run out of memory before we finished. As a result, we had to allow people to specify what schemas they wanted to register. This decision had quite a few knock-on effects for the design, which I will cover in a future post. 2. Connecting to Oracle The next obvious difference is in actually connecting to Oracle – in SQL Server, you can specify a server and database, and off you go. On Oracle things are slightly more complicated. SIDs, Service Names, and TNS A database (the files on disk) must have a unique identifier for the databases on the system, called the SID. It also has a global database name, which consists of a name (which doesn't have to match the SID) and a domain. Alternatively, you can identify a database using a service name, which normally has a 1-to-1 relationship with instances, but may not if, for example, using RAC (Real Application Clusters) for redundancy and failover. You specify the computer and instance you want to connect to using TNS (Transparent Network Substrate). The user-visible parts are a config file (tnsnames.ora) on the client machine that specifies how to connect to an instance. For example, the entry for one of my test instances is: SC_11GDB1 = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = simonctest)(PORT = 1521)) ) (CONNECT_DATA = (SID = 11gR1db1) ) ) This gives the hostname, port, and SID of the instance I want to connect to, and associates it with a name (SC_11GDB1). The tnsnames syntax also allows you to specify failover, multiple descriptions and address lists, and client load balancing. You can then specify this TNS identifier as the data source in a connection string. Although using ODP.NET (the .NET dlls provided by Oracle) was fine for internal prototype builds, once we released the EAP we discovered that this simply wasn't an acceptable solution for installs on other people's machines. Due to .NET assembly strong naming, users had to have installed on their machines the exact same version of the ODP.NET dlls as we had on our build server. We couldn't ship the ODP.NET dlls with our installer as the Oracle license agreement prohibited this, and we didn't want to force users to install another Oracle client just so they can run our program. To be able to list the TNS entries in the connection dialog, we also had to locate and parse the tnsnames.ora file, which was complicated by users with several Oracle client installs and intricate TNS entries. After much swearing at our computers, we eventually decided to use a third party Oracle connection library from Devart that we could ship with our program; this could use whatever client version was installed, parse the TNS entries for us, and also had the nice feature of being able to connect to an Oracle server without having any client installed at all. Unfortunately, their current license agreement prevents us from shipping an Oracle SDK, but that's a bridge we'll cross when we get to it. 3. Running synchronization scripts The most important difference is that in Oracle, DDL is non-transactional; you cannot rollback DDL statements like you can on SQL Server. Although we considered various solutions to this, including using the flashback archive or recycle bin, or generating an undo script, no reliable method of completely undoing a half-executed sync script has yet been found; so in this case we simply have to trust that the DBA or developer will check and verify the script before running it. However, before we got to that stage, we had to get the scripts to run in the first place... To run a synchronization script from SQL Compare we essentially pass the script over to the SqlCommand.ExecuteNonQuery method. However, when we tried to do the same for an OracleConnection we got a very strange error – 'ORA-00911: invalid character', even when running the most basic CREATE TABLE command. After much hair-pulling and Googling, we discovered that Oracle has got some very strange behaviour with semicolons at the end of statements. To understand what's going on, we need to take a quick foray into SQL and PL/SQL. PL/SQL is not T-SQL In SQL Server, T-SQL is the language used to interface with the database. It has DDL, DML, control flow, and many other nice features (like Turing-completeness) that you can mix and match in the same script. In Oracle, DDL SQL and PL/SQL are two completely separate languages, with different syntax, different datatypes and different execution engines within the instance. Oracle SQL is much more like 'pure' ANSI SQL, with no state, no control flow, and only the basic DML commands. PL/SQL is the Turing-complete language, but can only do DML and DCL (i.e. BEGIN TRANSATION commands). Any DDL or SQL commands that aren't recognised by the PL/SQL engine have to be passed back to the SQL engine via an EXECUTE IMMEDIATE command. In PL/SQL, a semicolons is a valid token used to delimit the end of a statement. In SQL, a semicolon is not a valid token (even though the Oracle documentation gives them at the end of the syntax diagrams) . When you execute the command CREATE TABLE table1 (COL1 NUMBER); in SQL*Plus the semicolon on the end is a command to SQL*Plus to execute the preceding statement on the server; it strips off the semicolon before passing it on. SQL Developer does a similar thing. When executing a PL/SQL block, however, the syntax is like so: BEGIN INSERT INTO table1 VALUES (1); INSERT INTO table1 VALUES (2); END; / In this case, the semicolon is accepted by the PL/SQL engine as a statement delimiter, and instead the / is the command to SQL*Plus to execute the current block. This explains the ORA-00911 error we got when trying to run the CREATE TABLE command – the server is complaining about the semicolon on the end. This also means that there is no SQL syntax to execute more than one DDL command in the same OracleCommand. Therefore, we would have to do a round-trip to the server for every command we want to execute. Obviously, this would cause lots of network traffic and be very slow on slow or congested networks. Our first attempt at a solution was to wrap every SQL statement (without semicolon) inside an EXECUTE IMMEDIATE command in a PL/SQL block and pass that to the server to execute. One downside of this solution is that we get no feedback as to how the script execution is going; we're currently evaluating better solutions to this thorny issue. Next up: Dependencies; how we solved the problem of being unable to register the entire database, and the knock-on effects to the whole product.

  Read the article

• Oracle Enterprise Manager Cloud Control 12c Release 3 (12.1.0.3)

  - by Ankit G

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Delighted to announce the GA of EM Cloud Control Release 3 on all supported platforms. This release includes a new 12.1.0.3 version of platform (OMS & Agent), along with revised new versions of several Plug-ins and Metadata plug-ins (including a brand new Metadata plug-in for Oracle Virtual Networking). This release marks yet another major & significant milestone for Enterprise Manager 12c Cloud Control product releases. Following shows the list of new plug-ins versions available along the Oracle Enterprise Manager Cloud Control 12c Release 3 (12.1.0.3). The new plug-ins have dependency on 12.1.0.3 platform, and customer needs to be on minimum 12.1.0.3 platform (OMS/Agent) version of the product before being able to deploy/use these plug-in versions. (In other words, the new plug-in versions cannot be deployed, unless Oracle Enterprise Manager Cloud Control 12c Release 3 (12.1.0.3) is installed or upgraded to). Oracle Enterprise Manager Cloud Control 12c Release 3 (12.1.0.3) release includes tons of new features, along with several stability and performance bug fixes and is available for download for all platforms from OTN:Installation/Upgrade paths: EM Customers can do a fresh installation using "Oracle Enterprise Manager Cloud Control 12c Release 3 (12.1.0.3)", and will get the latest version of the platform, along with all the latest versions of plug-ins and Metadata plug-ins out of the box. EM Customers who are on Release1 (12.1.0.1+BP1) or Release 2 (12.1.0.2), or on older releases 11g and 10.2.0.5, can choose to use Oracle Enterprise Manager Cloud Control 12c Release 3 bits, to upgrade directly to the latest Release 3, and the plug-ins will be automatically upgraded to the latest versions. Enterprise Manager Certification Matrix is also now available on My Oracle Support - here.

  Read the article

• Mise à jour Partner Enablement Oracle University (novembre)

  - by swalker

  Executive overview of Oracle Fusion Applications in 1-day from your desktop Designed from the ground up using the latest technology advances and incorporating the best practices gathered from Oracle's thousands of customers, Oracle Fusion Applications are 100% open-standards-based business applications that set a new standard for the way we innovate, work, and adopt technology. Learn more about them: Oracle University has scheduled a 1–day executive overview as a Live Virtual Class on the following dates: 1 December 2 December Your OPN discount applies to the standard price shown on the website. New In Class and Online dates will be shared on education.oracle.com. Book online or contact your local Oracle University representative for scheduling requests and more information. Deux nouvelles formations intensives OPN Only Boot Camps Les formations OPN Only Boot Camps suivantes viennent d'être mises à disposition : Formation technique intensive de 3 jours Oracle Exadata 11g  : Vous prépare à devenir un Spécialiste certifié de l’implémentation Oracle Exadata 11g Actuellement prévue en Allemagne, au Royaume-Uni Possibilité d'organisation dans tous les pays Dates des classes virtuelles en direct : 15-17 fév. 2012 & 16-18 mai 2012 Formation intensive de 5 jours Oracle BI Enterprise Edition 11g Implementation Actuellement prévue en Suède Possibilité d'organisation dans tous les pays Consulter le calendrier complet des formations OPN Only Boot Camp. Nouveautés du côté des certifications : Java SE 7 Soyez parmi les premiers à obtenir la certification Java SE 7 . Les examens suivants sont depuis peu disponibles en bêta test : Code et intitulé de l'examen Filière de certification 1Z1-805 Upgrade to Java SE 7 Programmer (Bêta jusqu'au 17 déc. 2011) Professionnel certifié Oracle (Certified Professional), Programmeur Java SE 7 1Z1-803 Java SE 7 Programmer I (Bêta jusqu'au 17 déc. 2011) Associé certifié Oracle (Certified Associate), Programmeur Java SE 7 Un examen bêta vous confère deux avantages distincts : vous serez parmi les premiers à obtenir la certification, vous bénéficiez d'un tarif réduit. Les examens bêta peuvent être passés dans n'importe quel Centre de test Pearson VUE. Nouveaux cours Parmi les nouveautés d’Oracle Université de ce mois-ci, vous trouverez : Nouveaux cours - Cliquez ici pour en savoir plus. Vos partenaires souhaitent-ils obtenir le point de vue des experts de l'Oracle University ? Conseillez-leur de consulter les newsletters suivantes de l'Oracle University " href="http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=289&p_nl=tech" target="_blank">Newsletters Technologie Newsletters Applications Restez connecté à Oracle University : OracleMix Twitter LinkedIn Facebook

  Read the article

• Misaligned Display on Resume

  - by Shaun Killingbeck

  I have an odd issue with my laptop display when resuming from suspend. When I have an additional monitor connected there is no issue. However without an additional monitor connected, after resuming only the left 10% of the laptop screen (just enough to show the Unity Launcher and a bit more) is visibly working, although strangely in a screenshot this same 10% is shown on the right hand side of the screenshot: I ran xrandr --verbose before and after resume, and the only difference (using diff) was: 2c2 < LVDS connected 1366x768+0+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm --- > LVDS connected 1366x768+1280+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm This seems to suggest the screen position has been shifted by 1280 horizontally, the width of the second monitor I use. Indeed, running the command xrandr --output LVDS --pos 0x0 does bring the screen back to normal. However, I don't want to have to run this command every time, I'd prefer to cure the source of the problem than just correct the symptoms. Any ideas on how to get Ubuntu to keep the display configuration settings from before suspend when it resumes? or why it changes at all? Heres some technical details that might be pertinent: HP Pavilion DV6 Laptop Ubuntu 13.04 AMD Radeon HD 6400M Series AMD Radeon HD 6520G Using proprietary flgrx-updates driver and amdcccle (Catalyst Control Center) (Unfortunately the open source driver causes my laptop to run even hotter than it already does, otherwise I'd use that) The contents of Xorg.conf: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "1280 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1366x768" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1280x1024" EndSection Section "Device" Identifier "amdcccle-Device[0]-0" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:0:1:0" EndSection Section "Device" Identifier "amdcccle-Device[0]-1" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" BusID "PCI:0:1:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[0]-0" Device "amdcccle-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 2646 2646 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[0]-1" Device "amdcccle-Device[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• ApiChange Is Released!

  - by Alois Kraus

  I have been working on little tool to simplify my life and perhaps yours as developer as well. It is basically a command line tool that allows you to execute queries on your compiled .NET code base. The main purpose is to find out how big the impact of an api change would be if you changed this or that.  Now you can do high level operations like Diff public types for breaking changes. Who uses a method? Who uses a type? Who uses implements an interface? Who references me? What format has the binary  (32/64, Managed C++, Pure IL, Unmanaged)? Search for all event subscribers and unsubscribers. A unique feature is to check for event subscription imbalances. Forgotten event subscriptions are the 90% cause of managed memory leaks. It is done at a per class level. If one class does subscribe to one event more often than it does unsubscribe it is treated as possible event subscription imbalance. Another unique ability is to search for users of string literals which allows you to track users of a string constant which is not possible otherwise. For incremental builds the ShowRebuildTargets command can be used to identify the dependant targets that need a rebuild after you did compile one assembly. It has some heuristics in place to determine the impact of breaking changes and finds out which targets need to be recompiled as well. It has a ton of other features and a an API to access these things programmatically so you can build upon these simple queries create even better tools. Perhaps we get a Visual Studio plug in? You can download it from CodePlex here. It works via XCopy deployment. Simply let it run and check the command line help out. The best feature in my opinion is that the output of nearly all commands can be piped to Excel for further analysis. Since it does read also the pdbs it can show you the source file name and line number as well for all matches. The following picture shows the output of a –WhousesType query. The following command checks where type from BaseLibraryV1.dll are used inside DependantLibV1.dll. All matches are printed out with the reason and matching item along with file and line number. There is even a hyper link to the match which will open Visual Studio. ApiChange -whousestype "*" BaseLibraryV1.dll -in DependantLibV1.dll –excel The "*” is the actual query which means all types. The syntax is the same like in C# just that placeholders are allowed ;-). More info's can be found at the Codeplex Documentation.     The tool was developed in a TDD style manner which means that it is heavily tested and already used by a quite large user base inside the company I do work for. Luckily for you I got the permission to make it public so you take advantage of it. It is fully instrumented with tracing. If you find bugs simply add the –trace command line switch to find out what is failing and send me the output. How is it done? Your first guess might be that it uses reflection. Wrong. It is based on Mono Cecil a free IL parser with a fantastic API to access all internals of a managed assembly. The speed is awesome and to make it even faster I did make the tool heavily multi threaded. The query above did execute in 1.8s with the Excel output. On a rather slow machine I can analyze over 1500 assemblies in less than 40s with a very low memory consumption. The true power of Mono Cecil is that I can load an assembly like any other data file. I have no problems unloading a file but if I would have used reflection I would need to unload a whole AppDomain just to get rid of one assembly in my memory. Just to give you a glimpse how ApiChange.Api.dll can be used I show you one of the unit tests:           public void Can_Find_GenericMethodInvocations_With_Type_Parameters()         { // 1. Create an aggregator to collect our matches             UsageQueryAggregator agg = new UsageQueryAggregator();   // 2. This is the type we want to search for. Load it via the type query             var decimalType = TypeQuery.GetTypeByName(TestConstants.MscorlibAssembly, "System.Decimal");   // 3. register the type query which searches for uses of the Decimal type             new WhoUsesType(agg, decimalType);   // 4. Search for all users of the Decimal type in the DependandLibV1Assembly             agg.Analyze(TestConstants.DependandLibV1Assembly);   // Extract matches and assert             Assert.AreEqual(2, agg.MethodMatches.Count, "Method match count");             Assert.AreEqual("UseGenericMethod", agg.MethodMatches[0].Match.Name);             Assert.AreEqual("UseGenericMethod", agg.MethodMatches[1].Match.Name);         } Many thanks go from here to Jb Evian for the creation of Mono.Cecil. Without this fantastic piece of code it would have been much much harder. There are other options around like the Common Compiler Infrastructure  Metadata Api which should do the same thing but it was not a real option since the Microsoft reader did fail on even simple assemblies (at least in September 2009 this was the case). Besides this I found the CCI Apis much harder to use. The only real competitor was Reflector which does support many things but does not let me access his cool high level analyze commands. So I decided to dig into the IL specs and as a result you can query your compiled binaries from the command line or programmatically. The best thing is you try it out for yourself and give me some feedback what you miss. If you want to contribute or have a cool idea what should be added drop me a mail at A Kraus1@___No [email protected]. There is much more inside the tool I did not talk about it (yet).

  Read the article

• How Big Data and Social Won the Election

  - by Mike Stiles

  The story of big data’s influence on the outcome of the US Presidential election is worth a good look, because a) it’s a harbinger of things to come, and b) it’s an example of similar successes available to any enterprise seriously resourcing integrated big data, modeling, and data-driven execution on all assets, including social. Obama campaign manager Jim Messina fielded a data and analytics brain trust 5 times larger than 2008. At that time, there were numerous databases from various sources, few of them talking to each other. This time, the mission was to be metrics-centered and measure everything measurable, and in context with all the other data. Big data showed them exactly what they needed to know and told them what to do about it. It showed them women 40-49 on the west coast would donate big money if they got to eat with George Clooney. Women on the east coast would pony up to hang out with Sarah Jessica Parker. Extensive daily modeling showed them what kinds of email appeals, from who, and to whom, would prove most successful in raising cash, recruiting volunteers, and getting out the vote. Swing state voters were profiled and approached with more customized targeting that at any time in history. Ads were purchased on specific shows watched by the targets, increasing efficiency 14% over traditional media buys. For all the criticism of the candidate’s focus on appearing on comedy and entertainment shows, and local radio morning shows, that’s where the data sent them to reach the voters most likely to turn out for them. And then there was social. Again, more than in any other election, Facebook was used for virtual, highly efficient door-to-door canvasing. Facebook fans got pictures of friends in swing states and were asked to encourage them to act. Using that approach, 1 in 5 peer-to-peer appeals led to the desired action. Assumptions, gut, intuition, campaign experience, all took a backseat to strategy shifts solidly backed up by data. Zeroing in on demographics likely to back the President and tracking their mood daily literally changed the voter landscape. The Romney team watched Obama voters appear seemingly out of thin air. One Obama campaign aide said, “We ran the election 66,000 times every night.” Which brings us to your organization. If you’re starting to feel like the battle-cry of “but this is the way we’ve always done it” is starting to put you in an extremely vulnerable position, you’re right. Social has become a key communication tool of the 21st century. Failing to use it, or failing to invest in a deep understanding of who your customers and prospects are so the content you post there will achieve desired actions and results, will leave you waking up one morning wondering, “What happened?”@mikestilesPhoto stock.xchng

  Read the article

• WAIT-VHUB ? Whats Going On ?

  - by Neeraj Gupta

  I know many of you have been working on Oracle's Exalogic and other Engineered Systems. With partitions enabled now, things have gone multi dimension. But its fun. Isn't it ? While you have some EoIB configurations together with InfiniBand partitions, the VNICs are not coming up and staying in WAIT-VHUB state ?  Chances are that you have forgot to add InfiniBand Gateway switches' Bridge-X port GUIDs to your partition. These must be added as FULL members for EoIB to work properly. VHUB means a virtual hub in EoIB. Bridge-x is the access point for hosts to work over EoIB so thats why it must be a full member in partition. Step 1: Find out the port GUIDs of your bridge-x devices in IB Gateway switch. # showgwports INTERNAL PORTS: --------------- Device   Port Portname  PeerPort PortGUID           LID    IBState  GWState --------------------------------------------------------------------------- Bridge-0  1   Bridge-0-1    4    0x0010e00c1b60c001 0x0002 Active   Up Bridge-0  2   Bridge-0-2    3    0x0010e00c1b60c002 0x0006 Active   Up Bridge-1  1   Bridge-1-1    2    0x0010e00c1b60c041 0x0026 Active   Up Bridge-1  2   Bridge-1-2    1    0x0010e00c1b60c042 0x002a Active   Up Step 2: Add these port GUIDs to the IB partition associated with EoIB. Login to master SM switch for this task. # smpartition start # smpartition add -pkey <PKey> -port <port GUID> -m full # smpartition commit Enjoy ! 

  Read the article

• Walmart's Mobile Self-Checkout

  - by David Dorf

  Reuters recently reported that Walmart was testing an iPhone-based self-checkout at a store near its headquarters.  Consumers scan items as they're placed in the physical basket, then the virtual basket is transferred to an existing self-checkout station where payment is tendered.  A very solid solution, but not exactly original. Before we go further, let's look at the possible cost savings for Walmart.  According to the article: Pushing more shoppers to scan their own items and make payments without the help of a cashier could save Wal-Mart millions of dollars, Chief Financial Officer Charles Holley said on March 7. The company spends about $12 million in cashier wages every second at its Walmart U.S. stores. Um, yeah. Using back-of-the-napkin math, I calculated Walmart's cashiers are making $157k per hour.  A more accurate statement would be saving $12M per year for each second saved on the average transaction time.  So if this self-checkout approach saves 2 seconds per transaction on average, Walmart would save $24M per year on labor.  Maybe.  Sometimes that savings will be used to do other tasks in the store, so it may not directly translate to less employees. When I saw this approach demonstrated in Sweden, there were a few differences, which may or may not be in Walmart's plans.  First, the consumers were identified based on their loyalty card.  In order to offset the inevitable shrink, retailers need to save on labor but also increase basket size, typically via in-aisle promotions.  As they scan items, retailers should target promos, and that's easier to do if you know some shopping history.  Last I checked, Walmart had no loyalty program. Second, at the self-checkout station consumers were randomly selected for an audit in which they must re-scan all the items just like you do at a typical self-checkout.  If you were found to be stealing, your ability to use the system can be revoked.  That's a tough one in the US, especially when the system goes wrong, either by mistake or by lying.  At least in my view, the Swedes are bit more trustworthy than the people of Walmart. So while I think the idea of mobile self-checkout has merit, perhaps its not right for Walmart.

  Read the article

• Thinkpad brightness steps error using FN+Home/End

  - by petermolnar

  I've met the following problem: normally my T400 (Lenovo Thinkpad) has 16 steps of brightness, and Windows utilizes it correctly. After a fresh install & minor tweaks Mint 12 (which is based on 11.10 Ubuntu) I only had 6 steps which was way to few. Listing /sys/class/backlight showed 3 entried. I removed the acpi-tools package, one of the disapperared - and I now have 10 steps! Therefore I think if I can reduce the entries to 1 I'm going to have 16 steps, since the stepping will be 1 instead of 2 (or 3). /sys/class/backlight/ intel_backlight -> ../../devices/pci0000:00/0000:00:02.0/drm/card0/card0-LVDS-1/intel_backlight thinkpad_screen -> ../../devices/virtual/backlight/thinkpad_screen The problem is that I'm unable to trace back what are the configs / daemons / kernel options triggers these two. More strangely, I discovered a strange behaviour. I monitored watch -n1 "cat /sys/class/backlight/thinkpad_screen/actual_brightness" and watch -n1 "cat /sys/class/backlight/intel_backlight/actual_brightness" while changing the brightness with FN+home/end combinations from max to min. The outcome is the following: brighness intel thinkpad --------- ----- -------- MAX 2408475 7 | 1955115 5 | 1435640 3 | 1246740 1 | 1086175 0 | 1010615 6 | 859495 4 | 689485 2 v 481695 0 MIN 217235 0 brighness intel thinkpad --------- ----- -------- MIN 217235 0 | 481695 2 | 689485 4 | 859495 6 | 1010615 7 | 1086175 1 | 1246740 3 | 1435640 5 v 1955115 7 MAX 2408475 0 When stepping from MIN to MAX, there's no difference between the last 2 steps. Also, the OSD icon (Cinnamon desktop, default theme) goes from full to min in 4 steps and from full to min once again in 4 steps. So... it seems that the intel entry is working correctly, showing correct values. The thinkpad entry however twists the things and even showing incorrect values. Does anyone have any idea how to get rid of the thinkpad entry? System data: Linux Mint 12 3.0.0-16 kernel Lenovo ThinkPad T400 Cinnamon 1.4 desktop For any additional info, please tell me what do you need. EDIT I'm sorry, I forgot to mention, I added acpi_backlight=vendor to GRUB cmdline as well, this is the result of the semi-better working than the default.

  Read the article

• New Version Demonstration VM BIC2g 2013-04 Partner Edition

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 This Oracle Business Intelligence Linux VM virtual appliance (“BIC2g”) was developed to support Oracle OBI & BI-Apps sales and Oracle partners in product demonstrations, training activities and POC activities. It is available on ftp.oracle.com (see the deployment guide and “BIC2g 2013-04 Partner Edition Readme” pdf from the link below) and is available for OPN member partners. This BIC2g image is based on OBIEE v. 11.1.1.7. with Essbase and Essbase Studio Server started when starting BI. It also contains: Updated BI-Apps Cross Functional Demo (date advanced from 2011 to 2013), including DAC 11.1.1.6.4, Informatica 9.0.1 and is configured for a load against EBS R12. Both the 7.9.6.3 rpd/catalog and the 7.9.6.4 rpd/catalog versions of BI-Apps are provided. Updated integrated Essbase - BI Apps - EBS Demo (date advanced from 2009 to 2013. Re-configured BI Apps Data Sets to remove VPD (simplification) and greatly improved performance. Note that this image is identical to Oracle’s internal BI demonstration image, except that Endeca has been removed pending Endeca latest version availability on OTN. Once it is available on OTN we will provide a replacement that contains Endeca. Some of the screen shots in the “Readme”.pdf shows Endeca, but it is not on this (2013-04) image. The FTP access details and password are shown at the bottom of the page @ BI Solutions Engineering Partner Portal. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• Do I need to create my own or use a commercial server for the features and matchmaking options I want my game to support?

  - by baptzmoffire

  So I'm developing an indie turn-based game for iOS and, in coding up a Game Center matchmaking class, I'm starting to question whether Game Center is even the best choice for what I want this game to do. I need to figure out whether I need to create my own server, invest in a preexisting client or server service, or if I even need to use a server at all. If I do need to use a ready-made service other than Game Center, which server would accomodate my game's needs best? I have limited resources and funds. Here is the list of features I want my game to support, ideally: Turn-based gameplay (a la "with Friends" and "with Buddies" games) Smart matchmaking (matching users up with other players of comparable skill/achievements) Random matchmaking Facebook matchmaking Specific username matchmaking Contact list matchmaking A way to select what "type" of match you want to challenge an opponent to. (In random, smart, and Facebook matchmaking, there will be different "wagers" the player can make. [e.g. "I wanna play a random opponent for 1000 points. Now, I wanna play my Facebook buddy for 1,000,000 points."] There will be a predetermined range of amounts you can play for. It won't be customizable.) Buddies list capability (Game-buddies, as opposed to contacts and Facebook) A higher concurrent game cap than Game Center offers (which I still can't really find a straight answer on) Scalability (it should support 2 or 20,000,000 players) Objective-C compatibility Flexibility (for all the stuff I haven't thought of yet) Am I dreaming, here? Is there even a service that can handle all of these features? Do I need to invest months in learning a networking language to build my own? If so, how much would I need to spend on hardware? I've been looking around all morning and, so far, the only seemingly viable option is SmartFox. Under "Everything and the kitchen sink" section here, it says they support "virtual world with Zones, Rooms and RoomGroups, create complex game challenges, send invitations, manage buddy lists, create custom permission profiles, oversee the security aspects and tons more." http://www.smartfoxserver.com/overview/platform Is there an option that Im just overlooking? Thanks for any help anyone can provide. Sorry for the long poast. One last question: Does anyone know which server Dice with Buddies uses? I was experimenting with how many concurrent games I could get going and my ADHD kicked in at about 80 games. 80 concurrent games would be great for my game, but again, I need the other features I mentioned too. Thanks again.

  Read the article

< Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >