Search Results

Search found 74687 results on 2988 pages for 'work from home'.

Page 363/2988 | < Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >

• Can I connect two routers to one switch?

  - by vanneto

  I want to connect two routers to a switch which will then be connected to a modem. Now as far as I know a switch does not do network translation and this won't work with one IP address. So I bought two addresses at my ISP. Attached is a simple schematic that explains what I want to do. Is there any additional configuration needed on either of the routers (Linksys WRT54GL) to make this work or will it "Just Work"?

  Read the article

• How to set the network profile of Windows 7 via group policy?

  - by Ricket

  We are deploying client computers and in testing noticed that the first time the user logs into the computer, it asks them if the location is a home, work, or public location. We are worried that some users in our workplace might misread it (or not read it at all) and click Public, thus likely denying our access to the computer and messing up security settings and such. Can we set our network to be a "Work Network" location via group policy or some other mechanism of our Windows Domain so that the user is not prompted when connected to our network? Also these are laptops, so we don't want every network they connect to be set as work network, and we have several access points (wired and three wireless) which our users often switch between so I'm not yet sure if it reprompts with each access point but I have the feeling it will, and I would like all of these to be set to the Work profile type.

  Read the article

• Suggestions for Backup solution

  - by jiewmeng

  i am considering between windows home server simple nas extra HDD's in desktop btw, i will be the main user i am looking to fulfil the following needs: reliability (i am think RAID 1 or 5) not so prone to virus/malware infections (will using a separate NAS or home server help? say windows home server is still a windows pc except separated by network?) power efficiency (eg. spin down when not in use) download (eg. i may want to dl big files/torrents overnight and i may not want to use a full powered PC for it? does a full pc vs NAS provide significant power usage to justify cost of new system esp. since i am only user?) performance (i guess i like to write/access my files fast, on 2nd thought, maybe for backup i can forgo this? maybe for a WD Green HDD? but how much slower will it be? plus since i am the only user, i think the whole HDD will be mine?)

  Read the article

• using nginx with proxy_pass on a subdomain

  - by marcus3006

  a have a rails app that should listen on the subdomain redmine.example.com (using proxy_pass). all other requests for *.example.com should just redirect to a normal index.html. Here is my configuration: server { server_name www.example.com example.com; root /home/deploy/static/example; } upstream redmine { server unix:/tmp/redmine.socket fail_timeout=0; } server { # you could put a list of other domain names this application answers server_name redmine.example.com; root /home/deploy/rails/redmine/public; access_log /var/log/nginx/redmine_access.log; rewrite_log on; location * { proxy_pass http://redmine; } location ~ ^/(assets)/ { root /home/deploy/rails/redmine/public; gzip_static on; # to serve pre-gzipped version expires max; add_header Cache-Control public; } } anyone knows what's going wrong here? requests to example.com and www.example.com are handled correctly. when i try to acces redmine.example.com = "couldn't resolve host"

  Read the article

• Need Assistance on ASUS K55V USB ports not working

  - by Pascal Schilling

  I have a K55V ASUS laptop, W7 Home (64bit). Whenever I try to use a mouse (or any other USB device), it doesn't work because of a driver problem. The automatic update tries to update the driver and requires me to reboot directly after. It doesn't work. Windows update then wants to re-attempt the update and then I have to reboot (etc). Now, after 10 tries it still doesn't work. Can some one help me out on this? No USB ports work at the moment, it has 2 USB 3.0 ports and 1 USB 2.0 port.

  Read the article

• .htaccess with godaddy not working in subdomain

  - by explorex

  Hi, i have a site uploaded to shared subdomain (which is inside a folder). and htaccess is not working. please get details from here. EDIT::copied from stack overflow Hi, i uploaded as website to a subdomain, and every page is not working except the front page please check it here. what could be the possible reason? i shoud have 8 pages in front level and many more on admin level but i am getting 404 error as you can see, does anyone has idea or suggestion? UPDATE:: .htaccess file RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] UPDATE to url rounting i do have few url router like below BUT i dont have any default router $router->addRoute( 'get-destination', new Zend_Controller_Router_Route('destination/get/:id/:dest-name', array( 'controller' => 'destination', 'action' => 'get', 'id' => 'id', 'dest-name' => 'dest-name' )) ); just to make look cooler and on my navigation (which is loaded from xml i have) something like <nav> <home> <label>HOME</label> <controller>index</controller> <action>index</action> <route>default</route> </home> since i was getting url problem from where url was routed and please check phpinfo at http://websmartus.com/demo/globaltours/public_html/phpinfo.php

  Read the article

• From a performance standpoint, is there a preferred way to set up Thunderbird message filters?

  - by Steve V.

  When I used Kontact, I used filters heavily to sort my incoming email into various folders. Since switching to Thunderbird, I've been slowly recreating these filters as new mail arrives. This seems like the perfect time to rethink how I use message filters. The way I see it, there are two basic ways to filter messages. Either I can have lots of filters, or I can have lots of criteria. An example is in order. Assume that I get emails from four people (Boss, CEO, Intern, and StackOverflow) that I want to sort into two folders, "Stack" and "Work" Option A: Filter 1: if FROM contains "Boss" -> move to "Work" Filter 2: if FROM contains "CEO" -> move to "Work" Filter 3: if FROM contains "Intern" -> move to "Work" Filter 4: if FROM contains "StackOverflow" -> move to "Stack" Option B: Filter 1: if FROM contains "Boss" OR FROM contains "CEO" OR FROM contains "Intern" -> move to "Work" Filter 2: if FROM contains "StackOverflow" -> move to "Stack" Assuming that when I'm done, I'll have about a hundred different criteria to filter on, is one of these methods better than the other from a performance standpoint?

  Read the article

• Access an external SSH server through a restrictive proxy [on hold]

  - by Cyrille

  I'm a software developer. I wish to access my computer at home through SSH. For example, I sometime need to access my personal projects source code to check how I handled specific problems. Unfortunately, I currently work under an over-restrictive and anti-productive proxy that waste a hell of a lot of everyone's time (We often have to visit websites from our smartphones or use a web proxy to check very legitimates websites for answers, and don't get me started on other "security" overkill features we have to cope with...). Well, back to the subject, I can access my home computer from my phone (SSH, port 22 and 80 both redirected by router on port 22). It works, but it's quite uncomfortable. From my office computer, this is what I tried so far: export http_proxy=http://user:pass@proxyip:8080 echo "user:pass" > ~/.corkscrew-auth echo "ProxyCommand corkscrew proxyip 8080 %h %p /home/me/.corkscrew-auth" > ~/.ssh/config ssh 82.23.34.56 -l me -p 80 Proxy could not open connnection to 82.23.34.56: Forbidden ssh_exchange_identification: Connection closed by remote host (same without -p 80) Without corkscrew: ssh: connect to host 82.23.34.56 port 80: Connection timed out ssh: connect to host 82.23.34.56 port 22: Connection timed out Any other idea ?

  Read the article

• How do I tell Windows to use 802.11 in preference to 3G?

  - by Jon Skeet

  I have a Samsung NC-10 netbook which I take to work every day. Most of the time I use it just on the train/bus, but I also use it at work and home. It has a built-in 3G card which I want to use when travelling, but I'd prefer to use wifi when I'm at work or home, for obvious reasons. Unfortunately, if the 3G connection is up, Windows appears to use that in preference to wifi. Starting up and shutting down the 3G modem is a bit of a pain - it's not hard as such, just a bit inconvenient. Ideally I'd like it to always be up, and even have the connection itself up all the time, but without routing traffic through it if there's a wifi connection up. This is what my Android phone does, for example. Is there somewhere in Windows which lets me express an ordering for network interfaces? I suspect the routing table may be relevant, but it's a bit of a pain to mess around with. I'd really expect there to be a simple GUI way of setting this up - after all, it would equally be useful when dealing with wired vs wifi connections. I'm currently using Windows XP Home, but Windows 7 answers would also be useful as I'll be migrating soon.

  Read the article

• The script not working as expected files dump path

  - by user3319390

  I have a script needs to be dump matching cname from my file contains and then matching scode to dump file to $cname/$year/$month/$day/ into files like access and error logs #!/bin/sh #base_dir="/home/vizion/Desktop" path="/home/vizion/Desktop/adn_DF9D_20140515_0005.log" name=$(basename "$path" ".log") for x in *.log; do year=${x:9:4}; month=${x:13:2}; day=${x:15:2}; done while read -r line do cname=$(echo ${line} | awk '{split($7,c,"/"); print c[3]}') scode=$(echo ${line} | awk -F"[ ]" '{print $9}') [[ ! -d "$cname/$year/$month/$day" ]] && mkdir -p "$cname/$year/$month/$day/" [[ ( ${scode} -ge 200 ) && ( ${scode} -le 399 ) ]] && { # [[ ! -d "$cname/$year/$month/$day" ]] && mkdir -p "$cname/$year/$month/$day/" echo ${line} >> /home/vizion/Desktop/$cname/$year/$month/$day/${cname}_${name}_access.log } [[ ( ${scode} -ge 400 ) && ( ${scode} -le 599 ) ]] && { [[ ! -d "$cname/$year/$month/$day" ]] && mkdir -p "$cname/$year/$month/$day" echo ${line} >> ${cname}_${name}_error.log } done < $path i am able to filter logs but not not dumping the exact location It's going other locations suggest to me correction in script

  Read the article

• Shell scripts in sendmail aliases

  - by Rodrigo Asensio

  I'm trying to execute a sendmail alias script using this # aliases for my system addressx: |sh /usr/share/scripts/myscript.sh WON'T WORK addressx: '/usr/share/scripts/myscript.sh' WON'T WORK addressx: '|/usr/share/scripts/myscripts.sh' WON'T WORK Can I execute scripts or it must be a binary file ?

  Read the article

• Windows 7 / TCP/IP network share guide - looking for to resolve failure to mount lacie network drive but works on XP,Linux,Mac.

  - by Rob

  Can anyone advise me of a really good, readable, Windows 7 TCP/IP network share guide, book, or reference. I want this because I cannot mount my Lacie 2big ethernet network drive in Windows 7 (32 bit home), but I can mount it in Windows XP Home 32bit, Ubuntu Linux 10.04 and Apple MacOS X. This drive is being mounted via the accompanying Lacie Ethernet Agent in XP (which I believe uses "Bonjour" protocol), on Mac and Linux it works without further need for software. Another Super User user has the same problem, but no answer: Trouble accessing network drives in Windows 7 I hope my take on the question shows a better willingness to investigate and do some digging - and therefore invite some suggestions to help with this. The drive is detected by Windows 7 (i.e. speech bubble "network drive found") but on trying to open an Explorer window, this remains blank with the Windows busy pointer. I'd prefer not to reinstall Windows 7 to see if that cures the problem, I'd rather understand what is happening/not happening, perhaps even compare differences with Windows XP. Suggestions, please for such guides or even the original problem itself. Update Edit Rewrote question more comprehensively here: Mhttp://superuser.com/questions/304209/looking-for-definitive-answer-to-accessing-a-network-share-via-windows-7-home-and

  Read the article

• How can I disable 'natural breaks' in Workrave?

  - by Pixelastic

  I've just discovered Workrave, and was trying to use it along the Pomodoro technique (5mn break every 25mn). But the concept of 'natural breaks' of Workrave seems to interfere with what I'm trying to achieve. Workrave tries to guess that I'm doing a natural break if I stop using my mouse and keyboard for longer than 5s. It then stops the work timer, and start counting time as if I was doing my break. Here is a typical example : I've configured a 5mn rest break every 25mn. I start working. 10mn later, I receive a phone call, or start talking with a colleague, or any work-related action that do not need either keyboard nor mouse. Workrave then stops counting my time as work time, and starts its rest timer. If my phone call is shorter than 5mn, then Workrave will resume its timer where it stopped it. Meaning that my time on the phone is not counted as work time, and so my break time is pushed a few minutes later than it should be. Even worse, if my phone call is longer than 5mn, then Workrave count it as a complete rest break, and when I'll resume working, it will restart its timer completly. I'm looking for either a way to disable the natural breaks, or increase the 'inactivity time' from 5s to maybe ~1mn. Or maybe an other angle to look at the natural breaks that might work with the Pomodoro technique (forced 5mn breaks every 25mn). I'm using Ubuntu 11.10.

  Read the article

• OpenSSH (Windows) does not forward X11

  - by Shulhi Sapli

  I'm running Ubuntu 13.04 in VM and I wanted to do X11 forwarding to my host (Win 8), so far it works fine using PuTTY and XMing server for Windows. But I am curious why it doesn't work if I use OpenSSH binaries (it comes together with Git for windows). This is what I've done so far: ssh -X [email protected] (also tried with -Y) then gedit but received error of Cannot open display. echo $DISPLAY came out as empty. So, I try to export DISPLAY=localhost:0.0 but it still won't work. The DISPLAY environment that I set is exactly as when it runs with Putty. I also try changing the DISPLAY to 192.168.2.3:0.0 and other display number as well, but still it won't work. Of course I could just use Putty to make it work, but I was wondering why OpenSSH binaries does not work. I have enabled all settings required in both /etc/ssh/ssh_config and /etc/ssh/sshd_config. If I run with -v option, this is what I get F:\SkyDrive\Projects> ssh -X -v [email protected] OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Connecting to 192.168.2.3 [192.168.2.3] port 22. debug1: Connection established. debug1: identity file /c/Users/Shulhi/.ssh/identity type -1 debug1: identity file /c/Users/Shulhi/.ssh/id_rsa type -1 debug1: identity file /c/Users/Shulhi/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1p1 Debian-4 debug1: match: OpenSSH_6.1p1 Debian-4 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_4.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.2.3' is known and matches the RSA host key. debug1: Found key in /c/Users/Shulhi/.ssh/known_hosts:2 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /c/Users/Shulhi/.ssh/identity debug1: Trying private key: /c/Users/Shulhi/.ssh/id_rsa debug1: Next authentication method: password [email protected]'s password: It seems that there is no request for X11 (I'm not sure if there is should be one too here). Any pointers why it doesn't work?

  Read the article

• What version of windows server 2008 do I have

  - by lomaxx

  I have been asked to help out with administering a windows server 2008 R2 server however, I'm trying to work out what version it has installed so I can work out if I need to upgrade it or not. Is there a simple way to work out what version is installed?

  Read the article

• Low-profile, PCI Express, x1 video card with VGA-out?

  - by Dandy

  I just bought an Acer Aspire EasyStore H340 system (http://us.acer.com/acer/productv.do?LanguageISOCtxParam=en&kcond61e.c2att101=54825&sp=page16e&ctx2.c2att1=25&link=ln438e&CountryISOCtxParam=US&ctx1g.c2att92=450&ctx1.att21k=1&CRC=936243954) It comes with Windows Home Server, which I don't particularly care for (too dumbed down for my liking)--I bought the box mainly for the form factor, and intend to install Server 2008 on it and have it run as a small domain controller. The geniuses at Acer however went out of their way to ensure you can only run Home Server--you can only connect to it via the Home Server Connector software, as it has no video-out whatsoever (so essentially, there's no way to even get into the BIOS). It only has a low-profile, PCI Express x1 slot. It turns out to be way harder than I thought to locate a video card that both has an x1 connector, and is low-profile (I'd really rather not snip the bracket at the back just so it'll fit the case). I know they're out there, and I've seen one with Display Port outputs, but I don't have a monitor with this connection. So to reiterate, it needs to be: - x1 connector - low profile - VGA out (though DVI would be okay; I have some spare adapters) Can anyone recommend anything at all?

  Read the article

• How would I change the DocumenRoot on the version of Apache that came pre-installed on my Mac OS X s

  - by racl101

  OK, so I want to take advantage of the Apache server that comes installed on my Mac OS X system (which means, I would like not to have to install my own version of Apache since I might as well tryto use what comes bundled), and as such, I went to change some settings in the configuration file: /etc/apache2/httpd.conf Namely, I changed the these two lines: DocumentRoot "/Users/myusername/Sites" <Directory "/Users/myusername/Sites"> So that they initially pointed to a folder in my Dropbox folder (so I could have my docs sync to my Dropbox): DocumentRoot "/Users/myusername/Dropbox/public_html" <Directory "/Users/myusername/Dropbox/public_html"> That didn't work. So then I figured, ok maybe it was too much to ask to make folder in my Dropbox be my document root. So then I thought, what if I make the Document root another folder of my choosing like so: DocumentRoot "/Users/myusername/dev-sites/public_html" <Directory "/Users/myusername/dev-sites/public_html"> and that didn't work either. After looking within the httpd.conf file for clues it seems that only two directories appear to work as Document root paths for the Apache that comes bundled with Mac OS X: /Users/myusername/Sites (or ~/Sites) and /Library/WebServer/Documents/ But trying to use any other directories didn't seem to work. I would get 403 errors on my browser. I was wondering if there was some other settings to change on the httpd.conf file or any permissions to set to make this work. Any help would be appreciated and many thanks in advance.

  Read the article

• mac os x, find all symbolic links that point to files on a different volume

  - by Eddified

  In my ~ dir, I have some symlinks that point to "/Volumes/Macintosh HD 2/..." and I want to find them all recursively. A look at the man page for 'find' says the '-lname' argument will search the symbolic link contents. It appears to work, but not recursively: $ pwd /Users/myusername $ sudo find . -lname '/Volumes*' $ cd Documents/ $ sudo find . -lname '/Volumes*' ./Documents on Win7 ./work.rtf What's going on? How can I make this work recursively? -- The 'find' program is supposed to always work recursively. I checked perms, they look ok, but as you can see I used "sudo" just to be sure... no dice. $ ls -ld Documents/ drwx------+ 14 myusername staff 476 Jan 12 16:32 Documents/

  Read the article

• Load-balanced Linux server across internet?

  - by LinuxGnut

  I'm investigating setting up a load balanced server solution consisting of three CentOS 5.4 boxes. Two of these boxes will reside in one facility, while a third will reside in a different facility. I'm currently working to set up heartbeat, ldirectord, ipvsadm to load-balance the machines, but I'm not sure its going to work with I'm not overly familiar with the details behind how all of these work, but is the load balancing going to work correctly when these servers are not all on the same LAN? I'm not sure if heartbeat is using SNMP to send signals or not, which would only work over a LAN. Has anyone tried this or found a different solution?

  Read the article

• Keyboard/Mouse not working when windows vista has reached login screen

  - by Jonas

  I currently have a problem with a system (vista home premium, 64bit). USB kbd/mouse will not work when windows has booted/loaded their drivers and Im stuck at the login screen with no working input devices. None of the available boot options after F8 will boot to working kbd/mouse. They work in the bios setup and they seem powered all the way until a few seconds before the login screen. Legacy USB devices is also enabled in the bios. They also work with the recovery dvd, but I am unable to start the device manager to check or uninstall the mouse/kbd drivers. Cant get devmgmt.msc nor devmgr.dll (with rundll32) to work. System repair does not detect the problem and there are no available restore points (it was disabled). Any ideas?

  Read the article

• Microsoft Word 2008 on the Mac sometimes "Disappears" documents, really.

  - by Ross Charette

  This happens in a computer lab environment, has happened at least 3 times. We are running Microsoft Office 2008 for mac on Leopard, everything is updated. Our user's home directories are on a network drive, but the /Library/Cache folder is running locally. Typically a student will have a Word file that they have been working on, it's been saved before they even logged onto the computer that day. They log on, open the document, click the save icon (not go to File Save), sometimes even save multiple times, then close Word. The document is now gone. It's not hidden, there are no autosaves or anything in the Cache folder. Definitely not in the trash or trashes folder. It can't find it when you click on it in 'recent documents'. Searching meticulously though every folder in their home drive turns up nothing. They look using Finder, I look ssh'd as root into their home using ls -la. I look for similar files in case they renamed it by mistake. It's gone. Disappeared. Vaporized. It's happened to at least 3 different users in the past year. Much whining. Any idea?

  Read the article

• how to export VARs from a subshell to a parent shell?

  - by webwesen

  I have a Korn shell script #!/bin/ksh # set the right ENV case $INPUT in abc) export BIN=${ABC_BIN} ;; def) export BIN=${DEF_BIN} ;; *) export BIN=${BASE_BIN} ;; esac # exit 0 <- bad idea for sourcing the file now these VARs are export'ed only in a subshell, but I want them to be set in my parent shell as well, so when I am at the prompt those vars are still set correctly. I know about . .myscript.sh but is there a way to do it without 'sourcing'? as my users often forget to 'source'. EDIT1: removing the "exit 0" part - this was just me typing without thinking first EDIT2: to add more detail on why do i need this: my developers write code for (for simplicity sake) 2 apps : ABC & DEF. every app is run in production by separate users usrabc and usrdef, hence have setup their $BIN, $CFG, $ORA_HOME, whatever - specific to their apps. so ABC's $BIN = /opt/abc/bin # $ABC_BIN in the above script DEF's $BIN = /opt/def/bin # $DEF_BIN etc. now, on the dev box developers can develop both ABC and DEF at the same time under their own user account 'justin_case', and I make them source the file (above) so that they can switch their ENV var settings back and forth. ($BIN should point to $ABC_BIN at one time and then I need to switch to $BIN=$DEF_BIN) now, the script should also create new sandboxes for parallel development of the same app, etc. this makes me to do it interactively, asking for sandbox name, etc. /home/justin_case/sandbox_abc_beta2 /home/justin_case/sandbox_abc_r1 /home/justin_case/sandbox_def_r1 the other option i have considered is writing aliases and add them to every users' profile alias 'setup_env=. .myscript.sh' and run it with setup_env parameter1 ... parameterX this makes more sense to me now

  Read the article

• How to set up multi users on dev server with git and github

  - by Derek Organ

  I'm working on lamp application. We have 2 servers (Debian) Live and Dev. I constantly work on dev main to add new features and fix bugs. When happy all works well I scp the relevant code to the Live system. Database (mysql) is local to each machine. Now this is pretty basic setup really and I want to improve the workflow a bit. I use git and github for version control. Admittedly I've only really used one branch. Their can be 3 different developers who work on the code at different times. We all use the same linux username to connect to the dev server and edit the code directly when needed. I usually then commit and push the code at the end of the day to github. One thing to bare in mind is it isn't easy to run this code on a local machine as there are many apache and subdomain configurations that wouldn't work on a local machine so it is important to work on the dev server not locally. I need to create a new process because we need to have a main trunk now and a branch with a big code re-write. What is the best way to do this. Should I create different unix logins for each developer and set up different working areas on the dev server for there changes? e.g. /var/www/mysite_derek /var/www/mysite_paul /var/www/mysite_mike my thinking is they can do a pull from the main branch and then create there own branch and merge it back in. I'm not sure how this will work though with git locally and with github. will i need to create different github user accounts as well. I'd like to do this the 'right' way and future proof for having lots of potential developers but I also don't want to over complicate it. I simple and elegant solution is preferred. any recommendations or suggestions?

  Read the article

• How can I view my remote desktop that is on a subnet

  - by Noremac

  I have my ubuntu machine at work and I'd like to use remote desktop to work from home. However the remote machine is on a subnet and not directly connected to the internet. I am able to remotely connect through ssh to a server, from which I then ssh to my remote machine. This has been beneficial, however I am currently working on a GUI application so just the command line doesn't work so well. Any ideas? I have tried using ssh with the -X flag on both sessions, but this doesn't work. I am trying to connect from Windows Vista through a Mac server (isn't it a great setup?).

  Read the article

• How to turn a DSL wireless modem to a wifi hub

  - by my_question

  I used to use DSL for my home internet and used Qwest Q1000 wireless modem. Now I switched to cable and use wireless router to cover the home. One problem is I just bought a desktop and I like to put it in a place far away from the router. The desktop only has cable interface, it does not receive wifi. The obvious solution is I go buy that little USB dongle which can receive wifi and plug it to the desktop. But before doig that, I am wondering if somehow I can re-use the Q1000 modem. The modem has 4 LAN ports and it has wifi antenna. I tried connecting the desktop to Q1000's LAN port, the system shows wire connection is in place, but I cannot access internet. It seems to me Q1000's wifi function is to broadcast the wifi signal out instead of receiving signal. I went to the Q1000 configuration page by going to web page of "192.168.0.1", it is not clear how to set it up. I also wonder one thing, my home wifi is encrypted, so if I want to let Q1000 to join the wifi, I need to somehow type in the password, I am not sure how to do that either. Anyway, maybe this thing cannot be used in this fashion. If you have any suggestion, please shed some light. Thanks.

  Read the article

< Previous Page | 359 360 361 362 363 364 365 366 367 368 369 370  | Next Page >