Search Results

Search found 28170 results on 1127 pages for '16 bit animation'.

Page 364/1127 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

• sony vaio WLAN problem using 12.04

  - by Fredrik

  I'm unable to get my WLAN to work for my Sony Vaio model VPCF23C5E No problem connecting from windows, smartphones etc. $ sudo lshw -C network; lsb_release -a; uname -a; sudo rfkill list; dmesg | grep -i firm *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 64:27:37:92:99:0f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-29-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:16 memory:f7000000-f707ffff memory:f7080000-f708ffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: f0:bf:97:dd:b2:bd size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-1.fw ip=192.168.1.4 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:50 ioport:9000(size=256) memory:e2104000-e2104fff memory:e2100000-e2103fff LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise Linux siriedit 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: hci0: Bluetooth Soft blocked: no Hard blocked: no [ 1.287449] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 18.273582] [Firmware Bug]: ACPI(NGFX) defines _DOD but not _DOS Seen some proposed solution e.g. Wireless network cannot be enabled for Sony VAIO E series but answers there don't solve my problem... I'm out of ideas :-( What else can I check? update $ ifconfig -a eth0 Link encap:Ethernet HWaddr f0:bf:97:dd:b2:bd inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f2bf:97ff:fedd:b2bd/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5072 errors:0 dropped:0 overruns:0 frame:0 TX packets:4444 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4568435 (4.5 MB) TX bytes:610624 (610.6 KB) Interrupt:50 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1498 errors:0 dropped:0 overruns:0 frame:0 TX packets:1498 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:114156 (114.1 KB) TX bytes:114156 (114.1 KB) wlan0 Link encap:Ethernet HWaddr 64:27:37:92:99:0f inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6627:37ff:fe92:990f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1277 errors:0 dropped:0 overruns:0 frame:0 TX packets:472 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:483155 (483.1 KB) TX bytes:61031 (61.0 KB)

  Read the article

• Hard time installing Ubuntu

  - by Nick

  I have a MSI GT780DXR that currently is booting windows 7. I've been trying to dual boot windows 7 and ubuntu for some time now. Here's specs that I think would make a difference Windows 7 500GB*2 RAID 0 hard drives. (Hardware RAID I'm not sure if it's a dedicated RAID card though) 7200RPM Nvidia GT570M Background: I tried to install 12.04 (64 bit) a few times but the Desktop live cd and pendrive boots with a black screen. I've tried wubi but it boots to a black screen as well. I then tried the alternative 12.04 (64 bit) and went through the installation all the way til partitioning. I let Ubuntu notice the raid setup and I setup my swap, /, and home drives, I used my free space to create the three partitions. I tried to resize the windows drive and it told me I couldn't and to be happy with my current setup. When I finally got past I got an error on installing GRUB 2 and decided to skip it and continued on to finish installation. When I tried to boot up I got an invalid partition table error. Windows recovery disc, and a GPARTED live cd couldn't find any hard drives. I ended up following advice and typed this into the recovery command prompt. bootrec /fixmbr bootrec /fixboot bootrec /rebuildBcd It worked and here I am now. The question is, how would I be able to dual boot windows 7 and Ubuntu 12.04 with this information? Thanks,

  Read the article

• How do I left-click a Java Application on a WeTab running Ubuntu 12.10? (workaround defect in Onboard)

  - by Kat Amsterdam

  I installed Ubuntu 12.10 on my weTab. Everything works perfectly (albeit slowly) and I can touch and use every application execpt ones written in Java. When I start any Java Application the touchscreen does not recognize the left click. I believe it's a problem in OnBoard (the onscreen keyboard) because when I touch the mouse icon on the OnBoard and then the Java Application the left click works. This is very cumbersome for every click to first hit OnBoard mouse icon and then button in the Java app I would like to click. It defeats the purpose of a touchscreen. The Java Application is definitly touchable as it's running on 10 other machines with Elo Touchscreen. How do I get Ubuntu to recognize the left click in a java application automatically when I touch the screen? Or a way to dignose this so I can make a clear bug report? This happens in all the desktop environments (Gnome/Unity, XFCE4 and LXDE) I tried with openjdk-6-* and openjdk-7-* Stats: WeTab 32GB 3G 2GB RAM Intel(R) Atom(TM) CPU N450 @ 1.66GHz - 64-bit Ubuntu 12.10 - 64 bit Unity Desktop environment Xubuntu Desktop environment Lubuntu Desktop environment The real touchscreen driver from EETI (eGalaxy) (also didn't work with the Ubuntu standard touchscreen driver)

  Read the article

• Can you suggest some DIY PC specs for 1) Value, and 2) Future 'upgradability'?

  - by user17381

  Hi, I'm considering building a new desktop PC from components. For the last 7/8 or so years I have almost exlusively used laptops, and so have fallen behind a bit with knowledge of various hardware technologies. Anyway, now I'm considering building a new desktop machine. Mainly for development work, but also would be nice to do a bit of gaming. The two main criteria are: I would like the first build to be relatively low cost. I would like to select components that will allow me to upgrade in the future without throwing too much away. Can anyone recommend a setup? Thanks

  Read the article

• O'Reilly Deal to Oct/14/2013 05:00 PT - 50% off E-Books on mastering CSS3

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/10/11/oreilly-deal-to-oct142013-0500-pt---50-off-e-books.aspxAt  http://shop.oreilly.com/category/deals/css3.do?code=WKCSS&imm_mid=0b155e&cmp=em-prog-books-videos-lp-owo_css3_direct_wkcss, O'Reilly are offering 50% off a number of e-books on mastering CSS3 "CSS3—the technology behind most of the eye-catching visuals on the Web today—is loaded with capabilities that once would have required JavaScript or third-party plugins, such as animation, pseudo-classes, and media queries. Use CSS3 to transform markup into stunning, richly detailed web pages that look great in any browser. For one week only, SAVE 50% on CSS3 ebooks from shop.oreilly.com and take your sites from ordinary to incredible."

  Read the article

• How to install PyQt on Mac OS X 10.6

  - by Albert

  I want to install PyQt. This seems kind of complicated to install on OS X. I haven't found any precompiled packages of it (are there any? I would really prefer those). So I downloaded PyQt. And SIP, because it depends on that. These files: http://www.riverbankcomputing.co.uk/static/Downloads/PyQt4/PyQt-mac-gpl-4.7.3.tar.gz http://www.riverbankcomputing.co.uk/static/Downloads/sip4/sip-4.10.2.tar.gz Did a python configure.py && make && sudo make install on SIP -- installed without any problems. Tried the same on PyQt -- and failed of course: /Library/Frameworks/QtCore.framework/Headers/qglobal.h:288:2: error: #error "You are building a 64-bit application, but using a 32-bit version of Qt. Check your build configuration." Ok, so I tried with python configure.py --use-arch=i386. Same error. Any idea?

  Read the article

• Facing gestures in Linux mint Chrome Browser

  - by aravind.udayashankara

  I am using Linux mint OS since an Year , I use to consistently download updates and install , I use chrome as a default browser , when ever I open youtube and watch some video , I listen to some gestures in sound ( say repeated lyrics of song ) while it is playing , In firefox it is working fine . What is the problem am I missing any plugin , AFAIK Chrome doesn't need a flash player plug in , It has a built in flash player . IS that the problem ? And also previously I was not facing this , recently I started using Cinimon UI centOS after this all these kind of problems started MY hard ware is 64 bit intel core i3 and also I have installed linux mint 64 bit Please let me know what is the problem and how to fix this . Thanks in advance for responding to this post

  Read the article

• Install Ubuntu in UEFI mode (unable to boot from USB)

  - by Adele

  I recently bought a Dell Inspiron 15R SE with Windows 8 (64 bit) pre-installed (UEFI supported). I want to install Ubuntu in dual boot with Windows 8. I tried to follow all instruction here : https://help.ubuntu.com/community/UEFI And here : Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported) So, I set Secure Boot to "off" into BIOS and I disable Fast Startup as described here : http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html I created a bootable USB key for Ubuntu (Ubuntu 13.10 64bits international Edition) with Unetbootin. The problem is I am unable to boot from the USB key. The computer tries to boot into infinite loop. I also tried to boot from USB with "Legacy Boot" option instead of UEFI. In this case, the computer says there are no bootable devices. Of course, I tried to boot from my USB key on an other computer having normal BIOS and it works perfectly. Have you ideas about what I need to do to be able to boot from USB ? Thanks in advance for your help, Adele

  Read the article

• What's the best Flash Blocker for the Chrome Browser on a Mac?

  - by Bryan Schuetz

  Looking at the extensions gallery for Chromium there seems to be a number fo flash-blocking extensions available: A couple with very similar names even. I've been using ClicktoFlash in Safari and am used to it just flat out working everywhere. Unfortunately after using FlashBlock by Ruzanow for a bit I've noticed it gets a bit "Hinky" at times (blocking the flash by collapsing the div so you can't click to enable it, etc.) I have a feeling there may be some other extensions/scripts out there not listed above that are better. Ultimately I'd like to find a flash blocker that works as well as ClickToFlash does in Safari.

  Read the article

• Recursion in F#

  - by MarkPearl

  Things are slowly coming together – I was able to look at a bit of F# code and intuitively know what it was going to do (yay)… So today I saw a blog post by Bob Palmer on Fibonacci numbers in F# which inspired me to look at bit into recursion. First the C# example… class Program { public static void CountDown(int n) { switch (n) { case 0: Console.WriteLine("End of Count"); break; default: Console.WriteLine(n); CountDown(n-1); break; } } static void Main(string[] args) { CountDown(10); Console.ReadLine(); } }   In F#, the equivalent would look something like this… open System let rec CountDown n = match n with | 0 -> Console.WriteLine("End of Count"); | n -> Console.WriteLine(n); CountDown (n-1); CountDown 10 Console.ReadLine()   Pretty simple stuff. With F# you when making recursive calls you need to explicitly declare that the function is recursive with the “rec” keyword. Otherwise the code is pretty easy to read and self explanatory.

  Read the article

• New video card? [closed]

  - by TutorialPoint

  I ran into some problems with my ATI Radeon x1200. I want it to support vertex shader 3.0, but it only does 2.0. This is because Call of Duty: Modern Warfare 2 only works with 3.0. So, I want a new video card. Can someone help me, with a more clean look to it? I bet if I would stick to some seller, I would end up with a video card that does not support what I want, or is too expansive. I really do not want it to be above $75, if possible. Some info about my PC: Manufacter: XXODD Processor: AMD Athlon64 X2 DualCore 4000+ 2Ghz (but running currently 32 bit OS) ATI Radeon X1200 video card (the problem) 1 GB RAM DDR2 MS-7367 Motherboard Windows 7 Ultimate OS 32-Bit Build 7600 RTM

  Read the article

• Is learning C# as a first language a mistake?

  - by JuniorDeveloper1208

  I know there are similar questions on here, which I've read, but I recently read this post by Joel Spolsky: How can I teach a bright person, with no programming experience, how to program? And it got me thinking about my way of learning and whether it might actually be harmful in the long run. I've dabbled with various languages but C# is my first serious one, I've read "Head First C#" and created a few projects. But after reading the post above I've found it a bit disheartening that I may be going about it all wrong, obviously I respect Joel's opinion which is what has thrown me a bit. I've started reading "Code" as recommended in the reading list and I'm finding it pretty hard going, although enjoyable. I feel like it's taken the shine off of my "noobish hacking about" in Visual Studio. So now I'm unsure as to what path I should take? Should I take a step back and follow Joel's advice and start reading? I guess my main aim is just to become a good programmer, like everyone else, but I don't want to be going into bad practice by learning a .NET language when someone who's opinion I respect thinks that it is harmful. Thoughts?

  Read the article

• 3D game engines for XNA games

  - by Jenko

  Before I start development of an XNA game, I need to choose a 3D game engine to develop upon. Is this belief unfounded? Does XNA have basic object transformation, lighting and mesh/texture importing functionality by which you can develop a decent 3D side-scrolling game? Chances are I'm going to need a 3D engine such as Torque X to handle most of the special effects, animation and sound for me. What are the engines that you recommend building an XNA game with? What work reliably in your experience? Is XNA alone enough? do you have repositories of code that work directly with XNA to create effects and other game environments with sunlight, fog and rain?

  Read the article

• What do I need to Mod a Unreal Engine 3 game?

  - by RoadSideWarrior

  what I am looking for is some advise making a mod for a certain game and how I would go about making it. The game I am talking about is Blacklight: Retribution and what I wan't to know is; Is it possible? And if so, what programs will I need? It is an online only game so I was unsure how plausible a mod would be for it. Plus I have never made a video game before, but I do like the game and I wanted to do some things with it. Additionally, this will be my first time making anything video game related so I would appreciate any advise. To expand a bit, I plan to add something simple at first. A mod that would let you spectate another player in the first person. Then I plan do something a bit more complex where I want to make so the game optionally always records you playing (in short intervals most likely or you would run quickly out of memory). After all that is done I would add items, armor, weapons, and maybe make a map or not I am not sure but this in a shell what I hope to do. I don't know much about these things but I am reading anything I can get my hands on. So if this is overly ambitious or just plain out not a possibility any advise on what I should look to instead will be welcomed warmly. Thank you.

  Read the article

• Font size of emacs in ubuntu

  - by Ispinfx

  I use emacs in ubuntu and I use Monaco 10 as its default font. However, the font rendering seems a bit odd compared to my gnome terminal with the same font size: It's a bit smaller and not as clear as that in the terminal. I've tried to avoid simply this with size 11 but it's too large for me. How can I make it the same as its look in the terminal ? Any help is appreciated :) UPDATE: I should tell you the above on is GUI emacs running a shell, and the below is the gnome terminal. On the right are their correspond font settings. Both 100% capture with font size 10: (left: emacs, middle: terminal, right: gedit) One more (gvim's):

  Read the article

• Why can't Ubuntu find an ext3 filesystem on my hard-drive?

  - by urig

  This question is related to this question: Not enough components to start the RAID array? I'm trying to retrieve data from a "Western Digital MyBook World Edition (white light)" NAS device. This is basically an embedded Linux box with a 1TB HDD in it formatted in ext3. It stopped booting one day for no apparent reason. I have extracted the HDD from the NAS device and installed it in a desktop machine running Ubuntu 10.10 in the hope of accessing the files on the drive. I have followed instructions in this forum post, intended to mount the drive through Terminal: http://mybookworld.wikidot.com/forum/t-90514/how-to-recover-data-from-wd-my-book-world-edition-nas-device#post-976452 I have identified the partition that I want to mount and recover files from as /dev/sd4 by running "fdisk -l" and getting this: Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001cf00 Device Boot Start End Blocks Id System /dev/sdb1 5 248 1959930 fd Linux raid autodetect /dev/sdb2 249 280 257040 fd Linux raid autodetect /dev/sdb3 281 403 987997+ fd Linux raid autodetect /dev/sdb4 404 121601 973522935 fd Linux raid autodetect// When I try to mount using: "mount -t ext3 /dev/sdb4 /media/xyz" I get the following error: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so And "dmesg | tail" shows me: [ 15.184757] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 15.986859] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 15.988379] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 16.353379] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 16.705944] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 16.705951] tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX [ 16.706102] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.125673] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 27.600012] eth0: no IPv6 routers present [ 373.478031] EXT3-fs (sdb4): error: can't find ext3 filesystem on dev sdb4. I guess that last line is the punch line :) Why can't it find the ext3 filesystem on my drive? What do I need to do to mount this partition and copy its contents? Does it have anything to do with the drive being part of a RAID Array (see question mentioned above)? Many thanks to any who can help.

  Read the article

• O'Reilly 50& off offer on CSS3 books to 05:00 PT on Oct/28

  - by TATWORTH

  Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/10/21/oreilly-50-off-offer-on-css3-books-to-0500-pt.aspxAt  http://shop.oreilly.com/category/deals/css3.do?code=WKCSS&imm_mid=0b155e&cmp=em-prog-books-videos-lp-owo_css3_direct_wkcss, O'Reilly are offering 50% off a number of e-books on mastering CSS3 to 05:00 PT on Oct 28 "CSS3—the technology behind most of the eye-catching visuals on the Web today—is loaded with capabilities that once would have required JavaScript or third-party plugins, such as animation, pseudo-classes, and media queries. Use CSS3 to transform markup into stunning, richly detailed web pages that look great in any browser. For one week only, SAVE 50% on CSS3 ebooks from shop.oreilly.com and take your sites from ordinary to incredible."

  Read the article

• fwupd to update OCZ RevoDrive firmware gets a 'Permission denied' error

  - by Late

  Try as I might I just don't get it working (http://www.ocztechnology.com/ssd_tools/OCZ_RevoDrive_and_RevoDrive_X2/). There's another thread here with an similar issue here: Command is giving me "bash: ./fwupd: cannot execute binary file" I'm running command ./fwupd /dev/sdb which keeps returning me bash: ./fwupd: Permission denied I have tried running both bit versions available of fwupd with both of the latest 32- and 64-bit Ubunty 11.10, running the OS from an USB stick, but to no avail (could this be the problem?). In the other thread it was suggested that chmod +x fwupd (or chmod 0755 fwupd) should resolve this issue, but at least for me it has been for naught. It was also suggested to install certain libraries, but those were already included in the Ubunty build and I didn't have any luck after updating with apt-get. I also tried giving fwupd more privileges, r, x and w but same charade, run it in different ways from different places (where I'd have the fwupd present, ofc) among other things. What I also tried is giving the Ubunty 10.04 LTS a shot but it didn't even launch on either of my computers, though that's not the issue here. If anyone has any ideas on what the problem is and how I could get this working, it would be most appreciated!

  Read the article

• 2D fighting bounding boxes

  - by user36420

  I'm prototyping a 2D platformer/brawler game for uni and I'm having some trouble with creating collision/bounding boxes. This is most likely going to end up on a Vita so I do have some library constraints as well as performance implications. None of this has yet been implemented but is all theory. My idea was to have the artist create a sprite sheet for the character animation and then a second identical sprite sheet with the corresponding collisions in a solid colour (e.g green for where the character can be hit and red for dealing damage, near the foot if kicking etc.) With this, I would then parse the collision sheet and generate the various collisions required storing them in the character model. This is the point I feel would be most inefficient. While I think this is a possible solution, I was wondering if there was a more standard way of doing this or a more efficient way as I feel this would have severe performance problems.

  Read the article

• MySQL com_select?

  - by symcbean

  I'm looking to tune my query cache a bit. According to 7.6.3.4. Query Cache Status and Maintenance in the manual: The Com_select value is given by this formula: Qcache_inserts + Qcache_not_cached + queries with errors found during the column-privileges check However in 5.1.5. Server Status Variables it suggests that this is maintained by the DBMS. Having said that mysql> show status like 'Com_select%'; Always returns a value of 1 - and I'm pretty sure I've run more than one non-cached select query on my database since it started. It looks as if other people are similarly confused. Is this status variable redundant? Which bit of the manual is wrong? TIA

  Read the article

• On Windows 7, how can I tell if a recording is multi-channel without third party tools? [migrated]

  - by engineerchuan

  A customer has an audio that is confidential and can't send it to me. He also would not like to install other tools. He has a basic Windows 7 install. Is there any way to tell whether the recording is one channel or two channel? Normally, I would just get the audio and soxi it. Or, I would tell him to install Audacity or equivalent sound editor and open it up. I also thought that if you right clicked and looked at the size, bit rate, and length, you could get number of channels but bit rate already factors in number of channels. Sorry I'm not giving you a lot to work with.

  Read the article

• Long running calculation on background thread

  - by SundayMonday

  In my Cocos2D game for iOS I have a relatively long running calculation that happens at a fairly regular interval (every 1-2 seconds). I'd like to run the calculation on a background thread so the main thread can keep the animation smooth. The calculation is done on a grid. Average grid size is about 100x100 where each cell stores an integer. Should I copy this grid when I pass it to the background thread? Or can I pass a reference and just make sure I don't write to the grid from the main thread before the background thread is done? Copying seems a bit wasteful but passing a reference seems risky. So I thought I'd ask.

  Read the article

• Virtualbox install 12.04 guest: "pae not present"

  - by Peter.O

  I get this message while trying to install Ubuntu 12.04 as a guest in VirutalBox 4.1.18, on an Ubuntu 10.04 host. This kernel requires the following feature not present on the CPU: pae Some host specs: The host's kernel is: Linux 2.6.32-41-generic-pae GNU/Linux lscpu (host): Architecture: i686, CPU op-mode(s): 32-bit, 64-bit grep --color=always -i PAE /proc/cpuinfo   does show pae in its output. The 12.04 iso used is: ubuntu-12.04.0-desktop-i386.iso As a comparison/check, I downloaded and installed Linux Mint 13 Cinnamon to the same host on the exact same VM (I just changed the .iso image). It worked fine. Its iso is: linuxmint-13-cinnamon-dvd-32bit.iso It seems (to me) that I have pae.. what is going on here? Update: I had assumed that Linux Mint also required pae (being Ubuntu based), but I've just run;   grep --color=always -i PAE /proc/cpuinfo   in the Mint VM.   It showed no output.   So it seems the issue may lie with VirtualBox.   If that is the case, how can I get Virtualbox into pae mode?

  Read the article

• Ubuntu 12.04 and Realtek Wireless Card Incompatible

  - by Tim

  Quick background: I installed Linux Ubuntu 12.04 on a Dell Inspiron 3520 after uninstalling Windows 8. A friend suggested to do this as opposed to buying a laptop with Linux pre-installed. Everything except the wireless card works. When I load up the laptop, I see a wireless animation as if it's trying to locate the wireless connection (for a while, then it goes blank), but no connections appear under the wireless option (under "Edit Connections" then "Wireless"). What I've tried: - Doing ndiswrapper. Failed. - Installing a few kernels for realtek. Failed.

  Read the article

• Gnome 3 freezes when switching workspaces

  - by Bill Cheatham

  I have found an odd problem with Gnome 3 on Ubuntu recently. Under certain circumstances, when switching between two workspaces the whole desktop and user interface will 'freeze' for anything up to 2 minutes; during this time I cannot click anything or interact using the keyboard. Often, the screen will show a 'half-completed' animation of the workspace swapper. This is on Ubuntu 12.04.1 running on a 2-year old Macbook Pro, and it only seems to occur when using an external monitor. This does not seem to be a processor or memory issue, and does not occur every time I switch workspaces. Is this a known problem? What can I do in the short or long term to fix it?

  Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >