Search Results

Search found 16499 results on 660 pages for 'off rhoden'.

Page 365/660 | < Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >

• Remote Desktop AND monitor fail on restart (Win2008R2)

  - by Wesley

  I am in the process of building a small 3 server farm. Each machine is running Window Server 2008 R2. As is normal, I am in the process of installing patch after patch to bring the machine up to snuff. Every time I restart the machine, or most every time, when I try to remote in to the machine I get the Log In window, but then almost immediately I get the message that my remote session was ended. If I physically walk over to the machine and plug in a monitor and keyboard, I see nothing. If I leave the keyboard and monitor in and restart the machine by force, the computer reboots just fine. When windows starts, I get no error message about windows not starting or being shut off unexpectedly. Once I log into the machine physically by the keyboard, I can then remote in to the machine at that point. Very confused. This happens on all 3 machines, these machines have different hardware.

  Read the article

• Our company has 100,000s+ photos, how to store and browse/find these efficiently?

  - by tobefound

  We currently store our photos in a structure like this: folder\1\10000 - 19999.JPG|ORF|TIF (10 000 files) folder\2\20000 - 29999.JPG|ORF|TIF (10 000 files) etc... They are stored on 4 different 2TB D-link NASes attached and shared on our office network (\\nas1, \\nas2, and so on...) Problems: 1) When a client (Windows only, Vista and 7) wishes to browse the let's say \\nas1\folder\1\ folder, performance is quite poor. A problem. List takes a long time to generate in explorer window. Even with icons turned off. 2) Initial access to the NAS itself is sometimes slow. Problem. SAN disks too expensive for us. Even with iSCSI interface/switch technology. I've read a lot of tech pages saying that storing 100 000+ files in one single folder shouldn't be a problem. But we don't dare go there now that we experience problems on a 10K level. All input greatly appreciated, /T

  Read the article

• Notebook display not working properly

  - by jfcfar

  I have an old Acer TM4001 notebook. If the laptop is powered-off, with the lid closed, when I power it on, it generally works. Then, without touching anything, if I reboot the computer the internal display wil not work anymore. To make it working again I need to shut down the pc, close and reopen the lid and then turn it on. If I close and reopen the lid if it is not working after power the pc on, it won't work. When the screen is working, closing and opening it has no effect (the data cable seems ok). The external monitor always works as expected: If the internal display is not detected, the external will be the main (and only) display. This is not OS-related. When the screen is not working I cannot see the POST. What could be the cause for this?

  Read the article

• Can I legally make a free clone of a game and use the same name? [closed]

  - by BlueMonkMN

  I gather from Is it legally possible to make a clone of the game? and How closely can a game resemble another game without legal problems that I should not try to profit from a clone if it is using the same assets, and, I presume, the same name. My question is whether it's legal to make a game like "Set" or "Catch Phrase", using the same name, and release it for free. What would I be risking if I did so -- just a take down notice, or could there be financial risk too? Edit: I guess my real question is whether the legal freedom is greater for a free game than one that is trying to make a profit. I just want a version of the game I can play remotely. Edit 2: I don't understand why this is being considered off-topic. I read the FAQ and it says it'S OK to ask questions about project management, which includes Publishing. And naming a game is a key aspect to publishing. That's what my question is about - choosing a legal name for my game with the consideration that I might post/publish it.

  Read the article

• Ubuntu is unresponsive and scrolling is very jerky

  - by peterpipe

  I'm new to Ubuntu. I've been using 12.04LTS for over a week now. For 3 days it was great but now I'm having a number of problems. I'm using an Acer Aspire one D255 it has a 250GB HDD and a 1GB Memory. My browser is Firefox. Pages freeze occasionally and I wait for over 10 minutes and have to use the computer's 'off' button. Pages crash. On facebook some pictures don't load and I have to close down and restart a couple of times. Scrolling can sometimes be very jerky. Downloading software has become a problem and I have a 'no entry' sign in the top taskbar. I've looked at this page for some help but the words used and the explanations are not helpful to someone like me who has little knowledge of this. Please - 'Ubuntu for dummies'. I'd like to continue using Ubuntu but am close to giving up.

  Read the article

• What is the most secure way to set up a mysql user for Wordpress?

  - by Sinthia V

  I am setting up Subdomain based MU on my domain.Everything is hosted by me running on one CentOS/Webmin VPS. Will I be better off setting the MySQL user's domain as localhost, 127.0.0.1 or with a wildcard %.mydomain.com? Which is more secure? Is localhost === 127.0.0.1? If not what is the difference? Also, what is my domain from MySQL's or Wordpress' pov when I am connected by ssh terminal? How about When I connect by Webmin or Usermin? Does MySQL see me as Webmin or my Unix user?

  Read the article

• Why does the heat production increase as the clockrate of a CPU increases?

  - by Nils

  This is probably a bit off-topic, but the whole multi-core debate got me thinking. It's much easier to produce two cores (in one package) then speeding up one core by a factor of two. Why exactly is this? I googled a bit, but found mostly very imprecise answers from over clocking boards which do not explain the underlying Physics. The voltage seems to have the most impact (quadratic), but do I need to run a CPU at higher voltage if I want a faster clock rate? Also I like to know why exactly (and how much) heat a semiconductor circuit produces when it runs at a certain clock speed.

  Read the article

• Windows xp keeps rebooting itself every morning at 8am?

  - by mark

  Hi, I've got windows xp sp3. It seems to restart itself every morning at 8am (judging by the windows logs, I can see all apps log a startup at 8am every day). Whenever I get to the machine in the morning (around 9 am) I see it's rebooted. I've checked that automatic updates are off, and that the power management settings are set to "always on". I'm not sure what else could be causing the machine to reboot, not sure where to start looking. Any ideas? Thanks ---------- update ---------------- Just looking at the Event Viewer, I see a log message at 8:00:47am every day, which looks like a reboot log statement: Microsoft (R) Windows (R) 5.01.2600 Service Pack 3 Multiprocessor Free. For more information, see Help and Support Center at ...

  Read the article

• Download resume support blocked by isp?

  - by John Doe

  Can ISP block resume support for downloads ? I'm using IDM (internet download manager) to download of the internet from resume supported websites, yet I am unable to resume downloads. I tried different computers with the same result. Turned off firewall, didn't have any effect i was able to download with no issues until a couple of days ago. Another thing i noticed is that before IDM used to try to connect to several connections to speed up my download, but now it can only connect to one connection. Also i tried to download using my vpn, and i was able to download and resume downloads with no problem.

  Read the article

• Persistent retrying resuming downloads with curl

  - by Svish

  I'm on a mac and have a list of files I would like to download from an ftp server. The connection is a bit buggy so I want it to retry and resume if connection is dropped. I know I can do this with wget, but unfortunately Mac OS X doesn't come with wget. I could install it, but to do that (unless I have missed something) I need to install XCode and MacPorts first, which I would like to avoid. Curl is available though it seems, but I don't know how that works or how to use it really. If I have a list of files in a text file (one full path per line, like ftp://user:pass@server/dir/file1) how can I use curl to download all those files? And can I get curl to never give up? Like, retry infinitely and resume downloads where it left off and such?

  Read the article

• Removing DVI connectors stuck in video card ports

  - by thecyclegeek

  I need some help removing a couple of DVI connectors which are stuck in my video card ports. I don't know why they were screwed in so tightly in the first place but they won't move. I need to replace hardware in the machine, but doing so with the cables connected and the box in its current position is nearly impossible. I've tried pliers with grips to loosen the screws holding the cable, and I've tried a screwdriver, the latter ended up breaking off the plastic. Neither worked. I'm at a loss as to what to do and I'm very frustrated. Can I get some suggestions?

  Read the article

• How do you stop windows 7 from auto streaming mp3's online?

  - by angryuser

  Be it IE, Firefox or Chrome whenever I try to download a media file windows 7 starts streaming it in the browser instead of giving me options about what I want to do with the file i'm trying to download. I know the problem is with the OS and not the browser because I can download the file just fine off the website when I use Ubuntu. I get the feeling somewhere a setting is saying "open all mp3's in browser" but I dont know where to find or change it. Can anyone help? Edit: If I click on the FLAC version of the audio file, windows 7 automatically downloads it. If I click on the MP3 version, it automatically streams it to the browser.

  Read the article

• Keyboard no longer works when entering BIOS

  - by Tommy

  I am trying to boot from USB so I can install a couple different Linux distros. I can enter the BIOS, but as soon as I enter the BIOS the keyboard lights switch off (Num Lock and Caps Lock) and I cannot use the keyboard to do anything in the BIOS or even exit or restart the PC using Ctrl+Alt+Del or do anything at all with the keyboard. But as soon as I boot back into Windows, everything is fine... I've never had this problem before and some Googling hasn't helped. I've tried using a few other keyboards and simply unplugging/replugging the keyboards, but it didn't work. Is there anything I can do in Windows to maybe find out why the keyboard isn't working in the BIOS screen? In the Device Manager, all the drivers are up to date and there are no conflicts.

  Read the article

• Spammers sending out from an inactive domain

  - by YesIWillFixYourEmailSigh

  We have a shared hosting service running QMail and Plesk. One of our inactive clients was left active in the system by mistake, and spammers found their very weak passwords and sent out a massive barrage of messages before we caught the problem and shut off the services for that domain. My question is this: How did they get access to that domain in the first place? The client is long-gone and the domain/DNS is not pointing at our server at all, and neither is the MX record. So how were they able to find that domain and exploit it when nothing on the "outside" was pointing to it?

  Read the article

• Mac OS X Server 10.6.6 "disables" CPU in VMware Fusion [closed]

  - by wjlafrance

  Hello! I installed Mac OS X Server 10.6.0 in VMWare Fusion the other night and it worked perfectly, until I ran Software Update. I upgraded to 10.6.6 through the combo updater, and now when I start the VM it says: "The CPU has been disabled by the guest operating system. You will need to power off or reset the virtual machine at this point." I've switched the operating system in the options to OS X Server 32bit, 64bit, and even to Windows 7, and nothing has worked. Does anyone have any ideas?

  Read the article

• Partner Showcase

  - by rituchhibber

  Building a High Performance Employee Self Service Portal with Oracle WebCenter Free Half Day Technical Workshop Organisations started with static corporate intranets at the beginning of the “Noughties”, these have been evolving to the Intranet Portal that is common today. The rise in Employee Self Service leverages off this evolution to transform the intranet as a resource in order to deliver the “Contextual workers control panel”. This empowers employees to do their complete job from a single environment covering transactions, document handling, form completion, watching presentations, participating in discussions through to utilising search functionality. Ether Solutions - the Enterprise Portal specialists, together with C2B2 - the independent middleware experts, will deliver this workshop to you, allowing you to discover how Oracle WebCenter provides a high performance, highly scalable platform for social intranets and EmployeeSelf Service Portals. To register, please click here. When? Wednesday, 12th of December 2012 Where? Institute of Directors, 116 Pall Mall, London SW1Y 5ED Who should attend? Lead Developers, Technical Architects, Solution Architects, Technical Leads and other Technical team member interested in learning about WebCenter. Lingotek - Collaborative Translation Technology Lingotek is the leading provider of Collaborative Translation Technology designed to meet the requirements of organizations challenged with communicating, interacting, and commercializing a global audience. Lingotek software helps companies achieve unprecedented control over the translation process and enables companies to capture, grow, and reuse their linguistic assets. Lingotek has deployed systems for some of the most innovative organizations in the United States and has enabled the success of large Fortune 500 corporations, small professional firms, and companies of every size in between. For further information, please click here.

  Read the article

• vmware takes too much time to shut down

  - by user33754

  Each time I shuting down my virtual machine - it takes like 30 minutes for VM Ware to complete the process. The shut down is done, but it shows a black screen and doesn't respond to any command. I can't do a Power Power OFF or Power Suspend. When I click it - nothing changes. When trying to close - it says "still busy". This happens only when using a Virtual Machine stored on an external hard drive. When Virtual Machine files are stored on a local drive - everything is OK. Hard drive is working good. Any suggestions how can I investigate the issue?

  Read the article

• Sharing files from my Macbook to Windows Desktop

  - by Vahe

  What's the most dependable way to share files and folders on a OS X to Windows (I'm using 7). I've followed this guide: http://support.apple.com/kb/HT1812 However, this method does not seem dependable (Works only some of the time). My Macbook does not always show up under the Network on Windows. On certain occasions, turning off windows file sharing completely (in OS X preferences), restarting my Macbook and turning it back on helps. Is there any reason why this is happening? Is there an alternative method?

  Read the article

• Windows 7 spins up HDD when files should be on SSD

  - by ZorroDeLaArena

  I run 64-bit Windows 7 Ultimate off a Corsair 12GB SSD (cmfssd-128gbg2d) and I've got two older HDDs I use for storing media. However even though the operating system and all the programs are installed on the SSD, frequently when I'm starting programs, I can hear the computer spin up one of the HDDs before the app starts and I'm not sure why (and I don't know which drive it is). For programs that should open very quickly - Programmer's Notepad, Calculator (the basic one that comes with Windows), etc. - having to wait several seconds sometimes can be pretty obnoxious. Avoiding wait times like that are why I got the SSD in the first place. Is there any way to tell why that's happening? I'm happy to provide more information but I'm not sure what's important. Any help would be really appreciated!

  Read the article

• In terms of load handling, which is better: one server or two of equivalent power?

  - by seldary

  My goal is to figure out if i'm better off with one strong server, or multiple weaker servers with a load balancer. Does the fact of splitting the load between servers have an effect on the total load my website could take? It's hard to single that out, because there are of course a lot of parameters that affect the results, so some assumptions: Putting failover considerations aside - I know it matters, but for the sake of the question's simplicity, lets assume nothing fails. The servers in the multiple servers option have an accumulated "power" equivalent to the one server option (about the same amount of cores and RAM space). If that is too theoretical, here is a concrete question that could help: Suppose I have several instances of exactly the same server - lets call it S. Suppose that server S can serve a load of up to X calls per time unit. Will two S servers with a load balancer serve 2X calls per time unit? significantly more? significantly less?

  Read the article

• Monitors blank after restart [closed]

  - by offler

  i need help on the following issue. We have Dell T1650 PCs with 2 nvidia graphic adapters / Windows 7 and 4 attached monitors. At initial start all screens are blank, the computer does not show anything. If powered off by pressing the hardware power button and then restarting all monitors show a picture. The Windows event log shows only the errors, that the machine was shut down unexpectly. The last entry with blank screen seems to be that user specific dlls for every application are loaded. How can I find out the real problem?

  Read the article

• Mobile (Client) to Amazon S3 (Server) - Architecture

  - by wasabii

  let's start off with the problem statement: My iOS application has a login form. When the user logs in, a call is made to my API and access granted or denied. If access was granted, I want the user to be able to upload pictures to his account and/or manage them. As storage I've picked Amazon S3, and I figured it'd be a good idea to have one bucket called "myappphotos" for instance, which contains lots of folders. The folder names are hashes of a user's email and a secret key. So, every user has his own, unique folder in my Amazon S3 bucket. Since I've just recently started working with AWS, here's my question: What are the best practices for setting up a system like this? I want the user to be able to upload pictures directly to Amazon S3, but of course I cannot hard-code the access key. So I need my API to somehow talk to Amazon and request an access token of sorts - only for the particular folder that belongs to the user I'm making the request for. Can anyone help me out and/or guide me to some sources where a similar problem was addressed? Don't think I'm the first one and the amazon documentation is so extensive that I don't really know where to start looking. Thanks a lot!

  Read the article

• Should I bother upgrading my Opteron 270 Server?

  - by MousePad

  I have an Opteron Server machine (in a large workstation class case) running on the Tyan 2895 motherboard. It's a dual CPU socket board, but I only have one 270 in there. I have 4GB of RAM, but less than 3GB is addressable, even in 64bit mode, due to the way the board is designed. Is it worth spending a few hundred on an additional CPU and maybe some more RAM? The other problem is that one of the two SATA ports on the board had its wire socket break off. So only one drive can be run as of now. I could have it repaired, but at what cost? Add in the fact that the power supply is gunked up with dust and it's a bit of a nightmare. I actually work about it getting too hot. Seems that for the money I could buy a new server rack from Dell, but it also seems a shame to waste an otherwise working, and for my needs still very fast machine.

  Read the article

• Can I install Ubuntu 13.10 without the internet?

  - by user1526570

  I'm new to Ubuntu and Linux in general. I'm currently out of town and the dorm I am living in has terrible internet connection. It won't be another 2-3 weeks before I can go home and have proper internet connection. So my question is whether or not I can install Ubuntu 13.10 in my laptop without the internet and then do the updates once I go home? Also, I'm attempting to do a dual boot with my Lenovo G505s which was pre-installed with Windows 8. Hopefully I can pull this off. I already did the necessary things (I think and hope so) prior to installation: Disable secure boot Enable legacy and boot UEFI first Create partition Put installer in my pen drive As I am quite new to this, any advice would be of great help. Thanks in advance! EDIT: I tried yesterday. The installation asked me to connect to the internet, so I used my crappy dorm internet. When it reached the downloading/installtion of Ubuntu One, it just stopped and went on forever. So I had to stop it.

  Read the article

• Continue process after closing terminal?

  - by Jakobud

  Recently, I tried to unzip a 30 gig zip file on a remote system using Putty. As the long unzipping process continued, I closed Putty, assuming that the process would just continue to run on the remote machine. When I came back later and logged back into the machine again, I realized that the process must have stopped only part way through when I closed Putty. I wasn't expecting that to happen. My question is, how do I prevent this problem? Can I somehow fire off a process in the background? Or should just setup a one time cronjob that will run the process for me?

  Read the article

< Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >