Search Results

Search found 11194 results on 448 pages for 'big friendly giant'.

Page 366/448 | < Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >

  • How to make an equation span the whole page / line in LaTeX?

    - by Reed Richards
    I have this equation and it's quite big (basically a FDM one) but it aligns with the text and then continues out on the right side to the nothingness. I've tried stuff like \begin{center} and \hspace*{-2.5cm} but to no avail. I want it to use the whole line not just from the left-margin and out to the right. How do I do it and do I need to install some special package for it? I use the \[ instead of the displaymath like this \[ Equation arrays here \] The code \[ \left( \begin{array}{cccccc} -(2\kappa+\frac{hV\rho}{2}) & (\frac{hV\rho}{2}-\kappa) & 0 & \cdots & 0 \\ -\kappa & -(2\kappa+\frac{hV\rho}{2}) & (\frac{hV\rho}{2}-\kappa) & 0 & \cdots \\ 0 & -\kappa & -(2\kappa+\frac{hV\rho}{2}) & (\frac{hV\rho}{2}-\kappa) & 0 & \cdots \\ \vdots & 0 & \ddots & \vdots \\ \vdots & \vdots & \vdots & -\kappa & -(2\kappa+\frac{hV\rho}{2}) & (\frac{hV\rho}{2}-\kappa) \\ 0 & \vdots & \vdots & 0 & \kappa - \frac{2h\kappa_{v}}{\kappa}(\frac{hv\rho}{2} - \kappa) & -2\kappa \\ \end{array} \right) \left( \begin{array}{c} T_{1} \\ T_{2} \\ \vdots \\ T_{n} \\ \end{array} \right) = \left( \begin{array}{c} Q(0) + \kappa T_{0} \\ Q(h) \\ Q(2h) \\ \vdots \\ Q((n-1)h) \\ 2\frac{\kappa_{v}}{\kappa_{v}}T_{out} \\ \end{array} \right) \]

    Read the article

  • How to handle activity life cycle involving sockets in Android?

    - by Henrik
    Hello all, I have an Android activity which in turn starts a thread. In the thread I open a persistent TCP socket connection. When the socket connects to the server dynamic data is downloaded. The thread sends messages using Handler-class to the activity when data has been received. Now if the user happens to switch from portrait to landscape mode the activity gets an onDestroy call. At this moment I close the socket and stop the thread. When Android has switched landscape mode it calls onCreate yet again and I have to do a socket re-connect. Also, all of the data the activity received needs to be downloaded once more because the server does not have the ability to know what has been sent before, i.e. there is no "resume" feature. Thus the problem is that there is alot of data which is resent all the time when landscape mode is changed. What are my options here? Should I create a service which handles the socket traffic towards the server thus I always got all the data which the server has sent in the service. Or should I disable landscape mode all together perhaps? Or would my best bet be to rewrite my server which is a VERY BIG job :-) All input is welcome :-) / Henrik

    Read the article

  • Core Data Inferred Migration – Automatic "lightweight" vs Manual

    - by ohhorob
    I've updated the model of an existing iPhone app in some simple ways (remove attribute, add attribute, remove index), and can use automatic lightweight migration to migrate the persistent store. Due to the typical size of the data set, the processing time is not insignificant, and warrants feedback for the user. NSMigrationManager provides a simple but useful migrationProgress value that sends KVO notifications as the migration is performed. That forms the basis of providing feedback, however attempting to use an inferred model ([NSMappingModel inferredMappingModelForSourceModel:destinationModel:error:]) results in drastically different timing for the exact same dataset. Profile results on and original iPhone (2G) Automatic inferred lightweight migration PROFILE: CacheManager -migrateStore PROFILE: 0.6130 (+0.6130) models loaded PROFILE: 1.1759 (+0.5629) delegate -CacheManagerWillMigrate: PROFILE: 1.2516 (+0.0757) persistent store coordinator loaded PROFILE: 5.1436 (+3.8920) automatic lightweight migration completed PROFILE: 5.5435 (+0.3999) delegate -CacheManagerDidFinishMigration:withError: Manual inferred migration PROFILE: CacheManager -migrateStore PROFILE: 0.6660 (+0.6660) models loaded PROFILE: 1.1471 (+0.4811) inferred mapping model generated PROFILE: 1.4046 (+0.2574) delegate -CacheManagerWillMigrate: PROFILE: 1.5058 (+0.1013) persistent store coordinator loaded PROFILE: 22.6952 (+21.1894) manual migration completed PROFILE: 23.1478 (+0.4525) delegate -CacheManagerDidFinishMigration:withError: So, with an inferred model, the manual migration takes over 5 times longer than automatic! It's a big inconsistency, and the lightweight option that NSPersistentStoreCoordinator -addPersistentStoreWithType:configuration:URL:options:error: provides absolutely no indication of progress while processing. Can anybody provide a supported way to get the migrationProgress values during automatic migration, OR a way to configure an inferred mapping model to be as fast during manual processing as automatic?

    Read the article

  • HTTP: can GET and POST requests from a same machine come from different IPs?

    - by NoozNooz42
    I'm pretty sure I remember reading --but cannot find back the links anymore-- about this: on some ISP (including at least one big ISP in the U.S.) it is possible to have a user's GET and POST request appearing to come from different IPs. (note that this is totally programming related, and I'll give an example below) I'm not talking about having your IP adress dynamically change between two requests. I'm talking about this: IP 1: 123.45.67.89 IP 2: 101.22.33.44 The same user makes a GET, then a POST, then a GET again, then a POST again and the servers see this: - GET from IP 1 - POST from IP 2 - GET from IP 1 - POST from IP 2 So altough it's the same user, the webserver sees different IPs for the GET and the POSTs. Surely seen that HTTP is a stateless protocol this is perfectly legit right? I'd like to find back the explanation as to how/why certain ISP have their networks configured such that this may happen. I'm asking because someone asked me to implement the following IP filter and I'm pretty sure it is fundamentally broken code (breaking havoc for at least one major american ISP users). Here's a Java servlet filter that is supposed to protect against some attacks. The reasoning is that: "For any session filter checks that IP address in the request is the same that was used when session was created. So in this case session ID could not be stolen for forming fake sessions." http://www.servletsuite.com/servlets/protectsessionsflt.htm However I'm pretty sure this is inherently broken because there are ISPs where you may see GET and POST coming from different IPs. Any info on this subject is very welcome.

    Read the article

  • How do interpreters functions written in the class C++ in the main

    - by T_Geek
    Hi I'm working on a project about Data structures. In the first , I wrote everything in main but it sounds like C . But as I learned, I tried to thinkk OOP and do as little as possible in my main() methods. I've implemented some opertation in my class like add,delet,find.it's too easy to implement its . class ARB { private: struct BT { int data; BT *l; BT *r; }; struct BT *p; public ARB(); ~ARB(); void del(int n); void add(int n); }; void ARB::del(int num) { //The code ,don't care about it }; main() { // BTR T; T.add(3); T.add(5); }; But I arrived to the big program How can I define a methode which have to use a binary tree and to get a stack STACK ARB::MyFunct(BT* p) { // The code don't care about it } How can I apply it in the main programme main() { // BT T; T.add(3); T.add(5); STACK S; BT* p S=T.MyFunct(p); // error C2664 cannot convert parametre 1 }; **mention :I implement STACK class

    Read the article

  • Error handling in PHP

    - by Industrial
    Hi guys, We're building a PHP app based on Good old MVC (codeigniter framework) and have run into trouble with a massive chained action that consists of multiple model calls, that together is a part of a big transaction to the database. We want to be able to do a list of actions and get a status report of each one back from the function, whatever the outcome is. Our first initial idea was to utilize the exceptions of PHP5, but since we want to also need status messages that doesnt break the execution of the script, this was our solution that we came up with. It goes a little something like this: $sku = $this->addSku( $name ); if ($sku === false) { $status[] = 'Something gone terrible wrong'; $this->db->trans_rollback(); return $status; } $image= $this->addImage( $filename); if ($image=== false) { $error[] = 'Image could not be uploaded, check filesize'; $this->db->trans_rollback(); return $status; } Our controller looks like this: $var = $this->products->addProductGroup($array); if (is_array($var)) { foreach ($var as $error) { echo $error . '<br />'; } } It appears to be a very fragile solution to do what we need, but it's neither scalable, neither effective when compared to pure PHP exceptions for instance. Is this really the way that this kind of stuff generally is handled in MVC based apps? Thanks!

    Read the article

  • Can I print an HTMLLoader (pdf) in Adobe Air?

    - by Stephano
    I'm using AlivePDF to create a PDF file, then save it to the desktop. I can then use an HTMLLoader to display my lovely PDF file. Now, the print button in Adobe Reader works fine. However, there will be young children using the app, so I'd like to have a big "Print" button right above it. I figured I could just start up a print job and feed it my HTMLLoader. Am I doing something wrong here, cause I can't seem to get any output? note: variable "stuff" below is my HTMLLoader. I also have access to the PDF file if that comes in handy. private function print():void { var myPrintJob:PrintJob=new PrintJob(); var result:Boolean=myPrintJob.start(); if (result && stuff != null) { var rect:Rectangle=new Rectangle(0, 0, 2550, 3300); var opt:PrintJobOptions=new PrintJobOptions(true); myPrintJob.addPage(stuff, rect, opt); myPrintJob.send(); } else { //User does not have printer or user canceled print action } }

    Read the article

  • Can I print an HTMLLoader (pdf) in Adobe Air?

    - by Stephano
    I'm using AlivePDF to create a PDF file, then save it to the desktop. I can then use an HTMLLoader to display my lovely PDF file. Now, the print button in Adobe Reader works fine. However, there will be young children using the app, so I'd like to have a big "Print" button right above it. I figured I could just start up a print job and feed it my HTMLLoader. Am I doing something wrong here, cause I can't seem to get any output? note: variable "stuff" below is my HTMLLoader. I also have access to the PDF file if that comes in handy. private function print():void { var myPrintJob:PrintJob=new PrintJob(); var result:Boolean=myPrintJob.start(); if (result && stuff != null) { var rect:Rectangle=new Rectangle(0, 0, 2550, 3300); var opt:PrintJobOptions=new PrintJobOptions(true); myPrintJob.addPage(stuff, rect, opt); myPrintJob.send(); } else { //User does not have printer or user canceled print action } }

    Read the article

  • Saving HttpResponse/Request to file system

    - by chrisjlong
    Here is my scenario. User fills out this large page which is dynamically created based off DB values. Those values can change. When the user fills out the page and hits submit we want to save a copy of the page as html on the server, this way if the text or wording changes, when they go back to view their posted information, it is historically accurate. So I basically need to do this protected void buttonSave_Click(object sender, EventArgs e) { //collect information into an object to save it in the db bool result = BusinessLogic.Save(myBusinessObject); if (result) //!!! Here is where I need to save this page as an html file on my servers IFS!!!! else //whatever Response.Redirect("~/SomeOtherPage.aspx"); } Any help is greatly apprciated. Also I CANNOT just request the data from the url because query string parameters are a big no no in this case. The key to pull the database info up (at its highest level) is all in session so I cant just request a url and save it. Thanks!

    Read the article

  • How to sort objects in a many-to-many relationship in ruby on rails?

    - by Kenji Kina
    I've been trying to deal with this problem for a couple of hours now and haven't been able to come up with a clean solution. It seems I'm not too good with rails... Anyway, I have the following: In code: class Article < ActiveRecord::Base has_many :line_aspects, :dependent => :destroy has_many :aspects, :through => :line_aspects #plus a name field end class LineAspect < ActiveRecord::Base belongs_to :article belongs_to :aspect end class Aspect < ActiveRecord::Base belongs_to :data_type has_many :line_aspects has_many :articles, :through => :line_aspects end Now, what I would like to do, is to sort these in two steps. First list of Articles by their Articles.name, and then inside sort them by Aspect.name (note, not the middleman). For instance, alphabetically (sorry if the notation is not correct): [{ article => 'Apple', line_aspects => [ {:value => 'red'}, #corresponding to the Attribute with :name => 'color' {:value => 'small'} #corresponding to the Attribute with :name => 'shape' ] },{ article => 'Watermelon', line_aspects => [ {:value => 'green'}, #corresponding to the Attribute with :name => 'color' {:value => 'big'} #corresponding to the Attribute with :name => 'shape' ] }] Again, note that these are ordered by the aspect name (color before shape) instead of the specific values of each line (red before green). (NOTE: My intention is to displaye these in a table in the view) I have not found a good way to do this in rails yet (without resorting to N queries). Can anyone tell me a good way to do it?

    Read the article

  • Finding the right terminology for a dictionary table

    - by Karl Forner
    My concern is about what I currently call "dictionary tables", that are database tables containing a list of controlled vocabulary. Let's use an example: Suppose you have a table User containing fields: user_id : primary key first_name last_name user_type_id : foreign key to the UserType table and another table UserType with just two fields: user_type_id : primary key name : the name/value of a particular type of user. For instance, the UserType table may contain (1, Administrator), (2, PowerUser), (3, Normal)... My question is: what is the canonical term for a table like UserType, that only contains a list of (dictinct) words. I want to publish some code that help managing this kind of tables, but first I have to name them ! Thanks for your help. Current state of thought: For now I feel Lookup Tables is a good term. It is also used with the same meaning in these posts: http://dbix-class.35028.n2.nabble.com/RFC-Component-for-Lookup-tables-td3504085.html http://tonyandrews.blogspot.de/2004/10/otlt-and-eav-two-big-design-mistakes.html Lookup Tables Best Practices: DB Tables... or Enumerations The only problem is that lookup table is also sometimes used to name a junction table.

    Read the article

  • Questions related to mantis:

    - by Komal Matkar
    We are interested in installing Mantis but we have some doubts Please clarify as early as possible if you can so that we can go for further process. 1) We have one team at USA (Client’s place) and one is at India. In which server we should install the Mantis. If we are installing at USA will it run slow in India? 2) What about technical Support. You may take technical support with payment. But how much support will be given free (As we have to discuss this with client). 3) As we have seen details in your website, you have given it supports oracle and sql database. But we wanted to know till which lowest version of oracle and sql it supports. Please send us minimum requirement. 4) What is the capacity of the database to store defects? Backup facility is available? If yes please tell us how should we take. Because we have big team and 5-6 applications so it should not give further problems. 5) Database support: Do you provide database support or database while installation? While installing all the prerequisite application will get installed or we need any application separately. 6)How many users can access at a time? Will it work slowly if more users are working at a time? Thanks Komal

    Read the article

  • How to make UISlider output nice rounded numbers exponentially?

    - by RickiG
    Hi I am implementing a UISlider a user can manipulate to set a distance. I have never used the CocoaTouch UISlider, but have used other frameworks sliders, usually there is a variable for setting the "step" and other "helper" properties. The documentation for the UISlider deals only with a max and min value, and the output is always a 6 decimal float with a linear relation to the position of the "slider nob". I guess I will have to implement the desired functionality step by step. To the user, the min/max values range from 10 m to 999 Km, I am trying to implement this in an exponential way, that will feel natural to the user. I.e. the user experiences a feeling of control over the values, big or small. Also that the "output" has reasonable values. Values like 10m 200m 2.5km 150 km etc. instead of 1.2342356 m or 108.93837756 km. I would like for the step size to increase by 10m for the first 200m, then maybe by 50m up to 500m, then when passing the 1000 m value, it starts to deal with Kilometers, so then it is step size = 1 km up until 50 km, then maybe 25 km steps etc. Any way I go about this I end up doing a lot of rounding and a lot of calculations wrapped in a forrest of if statements and NSString/Number conversions, each time the user moves the slider just a little. I was hoping someone could lend me a bit of inspiration/math help or make me aware of a more lean approach to solving this problem. My last idea is to populate and array with a 100 string values, then have the slider int value correspond to a string, this is not very flexible, but doable. Thank you in advance for any help given:)

    Read the article

  • Android application listed as compatible with Sony Xperia S but still filtered from google play

    - by mlidal
    I have published an Android application and some users are complaining that it is listed as not compatible with Sony Xperia S. According to the developer console Xperia S (LT26i) is listed as compatible. Do anyone know of any reason why the app is still filtered from google play? I have seen people reporting problems with big apk files. This app is about 20Mb in size, with the largest file being 14Mb. Quite a bit but not enough to cause problems I think... Here is the output from aapt dump badging: package: name='no.bouvet.nrkut' versionCode='4' versionName='1.0' sdkVersion:'4' targetSdkVersion:'13' uses-permission:'android.permission.ACCESS_FINE_LOCATION' uses-permission:'android.permission.ACCESS_COARSE_LOCATION' uses-permission:'android.permission.ACCESS_WIFI_STATE' uses-permission:'android.permission.ACCESS_NETWORK_STATE' uses-permission:'android.permission.INTERNET' uses-permission:'android.permission.WRITE_EXTERNAL_STORAGE' application-label:'UT.no' application-icon-120:'res/drawable-ldpi/utno_launcher.png' application-icon-160:'res/drawable-mdpi/utno_launcher.png' application-icon-240:'res/drawable-hdpi/utno_launcher.png' application-icon-320:'res/drawable-xhdpi/utno_launcher.png' application: label='UT.no' icon='res/drawable-mdpi/utno_launcher.png' launchable-activity: name='no.bouvet.nrkut.MainActivity' label='UT.no' icon='' uses-feature:'android.hardware.location' uses-feature:'android.hardware.location.gps' uses-feature:'android.hardware.location.network' uses-feature:'android.hardware.wifi' uses-feature:'android.hardware.touchscreen' uses-feature:'android.hardware.screen.portrait' main other-activities search supports-screens: 'small' 'normal' 'large' 'xlarge' supports-any-density: 'true' locales: '--_--' densities: '120' '160' '240' '320'

    Read the article

  • What points to be used for Drawing Hexagonal Shaped Button

    - by Durga
    Using below code I am able to draw arrow shaped button(shown below) ,but I want to draw hexagone(shown below as result image) ,so that I can use png image of size 175x154 as button image ,What Points I need to use to draw this ? and i need to to draw 6 such buttons ,how do i achieve this ? private void Parent_Load(object sender, EventArgs e) { // Define the points in the polygonal path. Point[] pts = { new Point( 20, 60), new Point(140, 60), new Point(140, 20), new Point(220, 100), new Point(140, 180), new Point(140, 140), new Point( 20, 140) }; // Make the GraphicsPath. GraphicsPath polygon_path = new GraphicsPath(FillMode.Winding); polygon_path.AddPolygon(pts); // Convert the GraphicsPath into a Region. Region polygon_region = new Region(polygon_path); // Constrain the button to the region. btnExam.Region = polygon_region; // Make the button big enough to hold the whole region. btnExam.SetBounds( btnExam.Location.X, btnExam.Location.Y, pts[3].X + 5, pts[4].Y + 5); }

    Read the article

  • Automated UAT/functional tests on Swing applications without source code

    - by jas
    Our team is now working on a big Swing application. Our job basically focuses on writing extensions to the existing framework. A typical job would be adding a new panel/ or adding a new tab with some extra functionalities that suit our need. It seems FEST can help a lot in terms of unit-test our code. I am going to try it out this week. But the question here is if there is a way to do automated functional testing on the whole application. In another word, we do not only need to test our code but also the framework. After all, UAT is the most important part. I am currently considering decompiling the jar files we got into source code then we can identify the components and then use FEST. So, before I get started to give this approach a shot, I think I just ask for ideas and inspirations here. There must be people who have done similar things before. Would be nice if I could learn from the veterans who fought against this before . Thanks,

    Read the article

  • Drupal Views api, add simple argument handler

    - by LanguaFlash
    Background: I have a complex search form that stores the query and it's hash in a cache. Once the cache is set, I redirect to something like /searchresults/e6c86fadc7e4b7a2d068932efc9cc358 where that big long string on the end is the md5 hash of my query. I need to make a new argument for views to know what the hash is good for. The reason for all this hastle is because my original search form is way to complex and has way to many arguments to consider putting them all into the path and expecting to do the filtering with the normal views arguments. Now for my question. I have been reading views 2 documentation but not figuring out how to accomplish this custom argument. It doesn't seem to me like this should be as hard as it seems to me like it must be. Leaving aside any knowledge of the veiws api, it would seem that all I need is a callback function that will take the argument from the path as it's only argument and return a list of node id's to filter to. Can anyone point me to a solution or give me some example code? Thanks for your help! You guys are great. PS. I am pretty sure that my design is the best I can come up with, lets don't get off my question and into cross checking my design logic if we can help it.

    Read the article

  • strange chi-square result using scikit_learn with feature matrix

    - by user963386
    I am using scikit learn to calculate the basic chi-square statistics(sklearn.feature_selection.chi2(X, y)): def chi_square(feat,target): """ """ from sklearn.feature_selection import chi2 ch,pval = chi2(feat,target) return ch,pval chisq,p = chi_square(feat_mat,target_sc) print(chisq) print("**********************") print(p) I have 1500 samples,45 features,4 classes. The input is a feature matrix with 1500x45 and a target array with 1500 components. The feature matrix is not sparse. When I run the program and I print the arrray "chisq" with 45 components, I can see that the component 13 has a negative value and p = 1. How is it possible? Or what does it mean or what is the big mistake that I am doing? I am attaching the printouts of chisq and p: [ 9.17099260e-01 3.77439701e+00 5.35004211e+01 2.17843312e+03 4.27047184e+04 2.23204883e+01 6.49985540e-01 2.02132664e-01 1.57324454e-03 2.16322638e-01 1.85592258e+00 5.70455805e+00 1.34911126e-02 -1.71834753e+01 1.05112366e+00 3.07383691e-01 5.55694752e-02 7.52801686e-01 9.74807972e-01 9.30619466e-02 4.52669897e-02 1.08348058e-01 9.88146259e-03 2.26292358e-01 5.08579194e-02 4.46232554e-02 1.22740419e-02 6.84545170e-02 6.71339545e-03 1.33252061e-02 1.69296016e-02 3.81318236e-02 4.74945604e-02 1.59313146e-01 9.73037448e-03 9.95771327e-03 6.93777954e-02 3.87738690e-02 1.53693158e-01 9.24603716e-04 1.22473138e-01 2.73347277e-01 1.69060817e-02 1.10868365e-02 8.62029628e+00] ********************** [ 8.21299526e-01 2.86878266e-01 1.43400668e-11 0.00000000e+00 0.00000000e+00 5.59436980e-05 8.84899894e-01 9.77244281e-01 9.99983411e-01 9.74912223e-01 6.02841813e-01 1.26903019e-01 9.99584918e-01 1.00000000e+00 7.88884155e-01 9.58633878e-01 9.96573548e-01 8.60719653e-01 8.07347364e-01 9.92656816e-01 9.97473024e-01 9.90817144e-01 9.99739526e-01 9.73237195e-01 9.96995722e-01 9.97526259e-01 9.99639669e-01 9.95333185e-01 9.99853998e-01 9.99592531e-01 9.99417113e-01 9.98042114e-01 9.97286030e-01 9.83873717e-01 9.99745466e-01 9.99736512e-01 9.95239765e-01 9.97992843e-01 9.84693908e-01 9.99992525e-01 9.89010468e-01 9.64960636e-01 9.99418323e-01 9.99690553e-01 3.47893682e-02]

    Read the article

  • DSL to generate test data

    - by queen3
    There're several ways to generate data for tests (not only unit tests), for example, Object Mother, builders, etc. Another useful approach is to write test data as plain text: product: Main; prices: 145, 255; Expire: 10-Apr-2011; qty: 2; includes: Sub product: Sub; prices: 145, 255; Expire: 10-Apr-2011; qty: 2 and then parse it into C# objects. This is easy to use in unit tests (because deep inner collections can be written in single line), this is even more convenient to use in FitNesse-like system (because this DSL naturally fits into wiki), and so on. So I use this and write parser, but it's tedious to write each time. I'm not a big expert in DSL/language parsers, but I think they can help here. What would be the right one to use? I only heard about: DSL (I mean, any DSL) Boo (that I think can do DSL) ANTLR but I don't even know which one to pick and where to start. So the question: is it reasonable to use some kind of DSL to generate test data? What would you suggest to do so? Are there any existing cases?

    Read the article

  • postgres - ERROR: operator does not exist

    - by cino21122
    Again, I have a function that works fine locally, but moving it online yields a big fat error... Taking a cue from a response in which someone had pointed out the number of arguments I was passing wasn't accurate, I double-checked in this situation to be certain that I am passing 5 arguments to the function itself... Query failed: ERROR: operator does not exist: point <@> point HINT: No operator matches the given name and argument type(s). You may need to add explicit type casts. The query is this: BEGIN; SELECT zip_proximity_sum('zc', (SELECT g.lat FROM geocoded g LEFT JOIN masterfile m ON g.recordid = m.id WHERE m.zip = '10050' ORDER BY m.id LIMIT 1), (SELECT g.lon FROM geocoded g LEFT JOIN masterfile m ON g.recordid = m.id WHERE m.zip = '10050' ORDER BY m.id LIMIT 1), (SELECT m.zip FROM geocoded g LEFT JOIN masterfile m ON g.recordid = m.id WHERE m.zip = '10050' ORDER BY m.id LIMIT 1) ,10); The PG function is this: CREATE OR REPLACE FUNCTION zip_proximity_sum(refcursor, numeric, numeric, character, numeric) RETURNS refcursor AS $BODY$ BEGIN OPEN $1 FOR SELECT r.zip, point($2,$3) <@> point(g.lat, g.lon) AS distance FROM geocoded g LEFT JOIN masterfile r ON g.recordid = r.id WHERE (geo_distance( point($2,$3),point(g.lat,g.lon)) < $5) ORDER BY r.zip, distance; RETURN $1; END; $BODY$ LANGUAGE 'plpgsql' VOLATILE COST 100;

    Read the article

  • Calculate rotation between two Vector2s around a pivot

    - by Nick
    Hello all. After a good long Sunday google I am going to have to hang my head in shame and ask the question... What I have is a pivot vector2, a "Previous" vector2 and a "Current" vector2. I would like to be able to calculate the rotation in radians between them. A slight complication is the fact that the pivot may moved between previous and current but ill deal with the offsetting as a separate issue if you don't have the time to bring that into the fold. To clarify, an object which has two vectors, a pivot and a base ... the pivot sitting in the centre and the base at the bottom is rotated around an external pivot. I need to work out the rotation of the object itself around its centre using the two mentioned vectors. Very big thanks to anyone that can help. Background to problem I have a game where an object is rotated around an external pivot. By using using two points (one in the centre, one at the base of the object) I am wanting to to work out the rotation that needs to be applied to the objects sprite around its centre to conform to the larger rotation that has been applied.

    Read the article

  • how to do these in visio 2007?

    - by user285825
    I am very annoyed with this software. I am unable to do many things with this software. In the book 'UML distilled' many features of UML are discussed which I am not sure how to accomplish with visio 2007. For instance, 1) I can't find the unary association. In the UML static structure under shapes panel on left, there are a lot of components like package, class, blah, blah, binary association, blah, blah, association class. But where is unary association. 2) For sequence diagram, I created a message (any of sync, async, call type message, ordinary message). The I tried to incorporate some parameter information. I went to the properties. There were a category called arguments. But selecting that shows a table where arguments are supposed to be shown. But all are diasbled. 3) For sequence diagram, there is no component delete (the big X) in the UML Sequence. 4) For class diagram, there is supposed to be a comment compartment where comments like mentioning the responsibilities are allowed using a comment prefixed with "--". But I am not sure how to accomplish them. 5) there is also supposed to be a way to indicate static properties of a class. But I am not sure how to do that in visio. 6) there is supposed to be a stereotype for class <. But in the stereotype drop down there is no stereotype. 7) where is the ball and socket component?

    Read the article

  • Optimizing MySQL for ALTER TABLE of InnoDB

    - by schuilr
    Sometime soon we will need to make schema changes to our production database. We need to minimize downtime for this effort, however, the ALTER TABLE statements are going to run for quite a while. Our largest tables have 150 million records, largest table file is 50G. All tables are InnoDB, and it was set up as one big data file (instead of a file-per-table). We're running MySQL 5.0.46 on an 8 core machine, 16G memory and a RAID10 config. I have some experience with MySQL tuning, but this usually focusses on reads or writes from multiple clients. There is lots of info to be found on the Internet on this subject, however, there seems to be very little information available on best practices for (temporarily) tuning your MySQL server to speed up ALTER TABLE on InnoDB tables, or for INSERT INTO .. SELECT FROM (we will probably use this instead of ALTER TABLE to have some more opportunities to speed things up a bit). The schema changes we are planning to do is adding a integer column to all tables and make it the primary key, instead of the current primary key. We need to keep the 'old' column as well so overwriting the existing values is not an option. What would be the ideal settings to get this task done as quick as possible?

    Read the article

  • Understanding Java Wait and Notify methods

    - by Maddy
    Hello all: I have a following program: import java.util.concurrent.ExecutorService; import java.util.concurrent.Executors; public class SimpleWaitNotify implements Runnable { final static Object obj = new Object(); static boolean value = true; public synchronized void flag() { System.out.println("Before Wait"); try { obj.wait(); } catch (InterruptedException e) { System.out.println("Thread interrupted"); } System.out.println("After Being Notified"); } public synchronized void unflag() { System.out.println("Before Notify All"); obj.notifyAll(); System.out.println("After Notify All Method Call"); } public void run() { if (value) { flag(); } else { unflag(); } } public static void main(String[] args) throws InterruptedException { ExecutorService pool = Executors.newFixedThreadPool(4); SimpleWaitNotify sWait = new SimpleWaitNotify(); pool.execute(sWait); SimpleWaitNotify.value = false; SimpleWaitNotify sNotify = new SimpleWaitNotify(); pool.execute(sNotify); pool.shutdown(); } } When I wait on obj, I get the following exception Exception in thread "pool-1-thread-1" java.lang.IllegalMonitorStateException: current thread not owner for each of the two threads. But if I use SimpleWaitNotify's monitor then the program execution is suspended. In other words, I think it suspends current execution thread and in turn the executor. Any help towards understanding what's going on would be duly appreciated. This is an area1 where the theory and javadoc seem straightforward, and since there aren't many examples, conceptually left a big gap in me.

    Read the article

  • fgets in c doesn't return a portion of an string

    - by Marc
    Hi! I'm totally new in C, and I'm trying to do a little application that searches a string into a file, my problem is that I need to open a big file (more than 1GB) with just one line inside and fgets return me the entire file (I'm doing test with a 10KB file). actually this is my code: #include <stdio.h> #include <string.h> int main(int argc, char *argv[]) { char *search = argv[argc-1]; int retro = strlen(search); int pun = 0; int sortida; int limit = 10; char ara[20]; FILE *fp; if ((fp = fopen ("SEARCHFILE", "r")) == NULL){ sortida = -1; exit (1); } while(!feof(fp)){ if (fgets(ara, 20, fp) == NULL){ break; } //this must be a 20 bytes line, but it gets the entyre 10Kb file printf("%s",ara); } sortida = 1; if(fclose(fp) != 0){ sortida = -2; exit (1); } return 0; } What can I do to find an string into a file? I'v tried with GREP but it don't helps, because it returns the position:ENTIRE_STRING. I'm open to ideas. Thanks in advance!

    Read the article

< Previous Page | 362 363 364 365 366 367 368 369 370 371 372 373  | Next Page >